ALBERT

Description: Laws governing formation of the stress–strain state of a "horizontally loaded foundation/ bed" system are examined. Results of experimental investigation of combined foundations with inclined precast piles sunk into a tamped-in pit are presented, and proposals are given for formulation of a computational scheme.

Description: The water quality of the River Rhine has improved and might again suit the critically endangered European sturgeon A. sturio L, which was extirpated from the river by 1950. This study describes the tracking of 43 juvenile hatchery-reared A. sturio, in the Dutch part of the Lower Rhine and Delta, originating from an ex situ measure of the River Gironde population. Observing in situ juvenile downstream migration could help to identify essential habitats and potential threats, before actual stocking. Fish were implanted with transponders of the NEDAP Trail® system and released in two batches, in May ( n  = 13) and June 2012 ( n  = 30). Detections collected ( n  = 26) exhibited no upstream movement. Test-fish moved downstream with the flow. Because the historic estuary is disconnected from the North Sea by a sea lock “Haringvlietdam”, the migration of the fish followed the re-directed river discharge into the Port of Rotterdam (161 km). 96 % ( n  = 19) of the detections was collected from the harbor in brackish water, where fish presumably acclimatized to higher salinities. 14 % ( n  = 6) of the sturgeons were recaptured in coastal waters by beam trawlers, five within 1 month after release. It is concluded that sustainable coastal fisheries is a key-condition for rehabilitation of the European sturgeon. Adapted management of the sea lock will reconnect the estuary to the North Sea and create more favorable conditions for the species in the Lower Rhine and Delta.

Description: Rapidly eroding soft rock cliffs typically retreat at rates in excess of several metres per year, thus allowing the resolution of linkages between cliff dynamics and a range of climatic and marine forcing factors. New evidence from UK coastline of East Anglian coastline, southern North Sea shows that unprotected soft rock cliffs at three widely-spaced locations all show similar variability in retreat behaviour on decadal timescales, which we attribute to changing patterns of storminess in these decades. The 1990s were characterized by frequent months in which the North Atlantic Oscillation (NAO; a well-established measure of inter-annual climatic variability in North-West Europe) was extremely positive (more positive than +3) or extremely negative (more negative than −3), while the 2000s showed few occurrences of such extreme values. Depression tracks in positive NAO phases make the East Anglian coast prone to storm surges in which raised water levels result from deeply developed low pressure systems, generally associated with westerly air streams. In negative NAO phases the region is prone to easterly airflow which results in periods of strong onshore wind. Both phases are associated with high energetics in the forcing factors. Decadal-scale variability in cliffline retreat rates has implications for the practice of coastal management and policy making and suggests that cliff system responses to global environmental change are not simply driven by secular sea level rise.

Description: Preparation of reliable landslide hazard and risk maps is crucial for hazard mitigation and risk management. In recent years, various approaches have been developed for quantitative assessment of landslide hazard and risk. However, possibly due to the lack of new data, very few of these hazard and risk maps were updated after their first generation. In this study, aiming at an ongoing assessment, a novel approach for updating landslide hazard and risk maps based on Persistent Scatterer Interferometry (PSI) is introduced. The study was performed in the Arno River basin (central Italy) where most mass movements are slow-moving landslides which are properly within the detection precision of PSI point targets. In the Arno River basin, the preliminary hazard and risk assessment was performed by Catani et al. (Landslides 2:329–342, 2005) using datasets prior to 2002. In this study, the previous hazard and risk maps were updated using PSI point targets processed from 4 years (2003–2006) of RADARSAT images. Landslide hazard and risk maps for five temporal predictions of 2, 5, 10, 20 and 30 years were updated with the exposure of losses estimated in Euro (€). In particular, the result shows that in 30 years a potential loss of approximate €3.22 billion is expected due to these slow-moving landslides detected by PSI point targets.

Description: When two open-channel flows merge in a three-branch subcritical junction, a mixing layer appears at the interface between the two inflows. If the width of the downstream channel is equal to the width of each inlet channel, this mixing layer is accelerated and is curved due to the junction geometry. The present work is dedicated to simplified geometries, considering a flat bed and a $90^{\circ }$ 90 ∘ angle where two configurations with different momentum ratios are tested. Due to the complex flow pattern in the junction, the so-called Serret–Frenet frame-axis based on the local direction of the velocity must be employed to characterize the flow pattern and the mixing layer as Cartesian and cylindrical frame-axes are not adapted. The analysis reveals that the centerline of the mixing layer, defined as the location of maximum Reynolds stress and velocity gradient, fairly fits the streamline separating at the upstream corner, even though a slight shift of the mixing layer towards the center of curvature is observed. The shape of the mixing layer appears to be strongly affected by the streamwise acceleration and the complex lateral confinement due to the side walls and the corners of the junction, leading to a streamwise increase of the mean velocity along the centerline and a decrease of the velocity difference. This results in a specific streamwise evolution of the mixing layer width, which reaches a plateau in the downstream region of the junction. Finally, the evaluation of the terms in the Reynolds-Averaged-Navier–Stokes equations reveals that the streamwise and normal acceleration and the pressure gradient remain dominant, which is typical of accelerated and rotational flows.

Description: Modelling the design and implementation of urban water infrastructure (particularly decentralised systems) for strategic planning and policymaking requires detailed information of the spatial environment and quantitative knowledge of social preferences. Currently available models, however, mostly use land use, population and impervious cover data without much regard for detailed urban form or society. This study develops an algorithm for determining urban form from minimal spatial data input by incorporating local planning regulations. The interaction between urban form and implementation of lot-scale infiltration systems under different social, biophysical and climate constraints is then investigated, firstly by looking at how this varies in different residential land uses and subsequently in a case study of a typical Melbourne residential subdivision of mixed land uses. Feasibility of infiltration and its downstream impact (runoff volume, frequency and pollution) were assessed for a range of social preferences (quantified as allowable garden space) and climate scenarios (30 % increase/decrease in rainfall and evapotranspiration). Performance indicators were determined through long-term simulation with the MUSIC software. Results show how different biophysical, planning, social and climate conditions affect infiltration feasibility as well as system performance. High infiltrating soils, for example, allow smaller, well-performing and socially less-imposing systems. Low infiltrating soils lead to larger system sizes, occupy much of the allotment’s garden space, but nevertheless provide the benefit of runoff frequency reduction. Overall, climate impact was not significant except for areas with poorly infiltrating soils. Joint consideration of social, planning, climate and water management aspects potentially allows more efficient policymaking, as an array of system configurations can be tested against different multi-faceted scenarios. Such models can help facilitate better participatory planning and policymaking.

Description: Cities in developed countries have increasingly adopted rainwater tanks as an alternative water source over the last 15 years. The rapid uptake of rainwater tanks has been driven by the need to reduce demand for centralised water services that are under pressure to adapt to population growth and climate change impacts. Rainwater tanks are part of integrated urban water management approach that considers the whole water cycle to provide water services on a fit for purpose basis that minimises the impact on the local environment and receiving waters. Rainwater tanks are typically applied at the household scale for non-potable water source uses such as toilet flushing and garden irrigation. However, this paper reports on a communal approach to rainwater harvesting, where the water is treated for potable use. A communal approach to rainwater harvesting can offer benefits, such as: economies of scale for capital costs, reduced land footprint, centralised disinfection and flexibility in matching supply and demand for different households. The analysis showed that the communal approach could provide a reliable potable water source to a small urban development. However, there was an energy penalty associated with this water source compared to centralised systems that could be addressed through more appropriate pump sizing. The outputs from this monitoring and modelling study demonstrated rainwater harvesting can be expanded beyond the current mainstream practices of household systems for non-potable use in certain development contexts. The analysis contained in this paper can be used for the improved planning and design of communal approaches to rainwater harvesting.

Description: Shadows in high resolution imagery create significant problems for urban land cover classification and environmental application. We first investigated whether shadows were intrinsically different and hypothetically possible to separate from each other with ground spectral measurements. Both pixel-based and object-oriented methods were used to evaluate the effects of shadow detection on QuickBird image classification and spectroradiometric restoration. In each method, shadows were detected and separated either with or without histogram thresholding, and subsequently corrected with a k-nearest neighbor algorithm and a linear correlation correction. The results showed that shadows had distinct spectroradiometric characteristics, thus, could be detected with an optimal brightness threshold and further differentiated with a scene-based near infrared ratio. The pixel-based methods generally recognized more shadow areas and with statistically higher accuracy than the object-oriented methods. The effects of the prior shadow thresholding were not statistically significant. The accuracy of the final land cover classification, after accounting for the shadow detection and separation, was significantly higher for the pixel-based methods than for the object-oriented methods, although both achieved similar accuracy for the non-shadow classes. Both radiometric restoration algorithms significantly reduced shadow areas in the original satellite images.

Description: Despite longstanding contributions to oceanography, similar use of fluorescence light detection and ranging (LiDAR) in lake settings is not routine. The potential for ship-mounted, multispectral Ultraviolet Fluorescence LiDAR (UFL) to provide rapid, high-resolution data in variably turbid and productive lake conditions are investigated here through a series of laboratory tank and field measurements carried out on Lake Balaton, Hungary. UFL data, calibrated empirically to a set of coinciding conventionally-analyzed samples, provide simultaneous estimates of three important parameters-chlorophyll a(chla), total suspended matter (TSM) and colored dissolved organic matter (CDOM). Successful UFL retrievals from both laboratory and field measurements were achieved for chla (0.01–378 mg∙m−3; R = 0.83–0.92), TSM (0.1–130 g∙m−3; R = 0.90–0.96) and CDOM (0.003–0.125 aCDOM(440); R = 0.80–0.97). Fluorescence emission at 685 nm is shown through tank measurements to display robust but distinct relationships with chla concentration for the two cultured algae species investigated (cyanobacteria, Cylindrospermopsis raciborskii, and chlorophyta, Scenedesmus armatus). The ratio between fluorescence emissions measured at 650 nm, related to the phycocyanin fluorescence maximum, to that at 685 nm is demonstrated to effectively distinguish these two species. Validation through both laboratory measurements and field measurements confirmed that site specific calibration is necessary. This study presents the first known assessment and application of ship-mounted fluorescence LiDAR in freshwater lake conditions and demonstrates the use of UFL in measuring important water quality parameters despite the more complicated hydro-optic conditions of inland waters.

Description: Aquaculture coasts have become widely distributed in coastal zones as human activities are intensified. Due to the complexity in this type of coast, it is difficult to extract the coastline with traditional automated mapping approaches. In this paper, we present an automated method—object-based region growing integrating edge detection (OBRGIE) for the extraction of this type of coastline. In this method, a new object feature named OMI (object merging index) is proposed to separate land and sea. The OBRGIE method was applied to Landsat Thematic Mapper (TM) (pixel size 30m) and Satellite Pour l’Observation de la Terre (SPOT-5) (pixel size 10 m) images of two coastal segments with lengths of 272.7 km and 35.5 km respectively, and the accuracy of the extracted coastlines was assessed in comparison with the manually delineated coastlines. The mean and RMSE (root mean square error) are 16.0 m and 16.4 m respectively for the TM images, and 8.0 m and 8.6 m, respectively, for the SPOT-5 images, indicating that the proposed method derives coastlines with pixel accuracy. The OBRGIE method is also found to be robust to the segmentation scale parameter, and the OMI feature is much more effective than the spectral attribute in separating land and sea in aquaculture coasts. This method may provide an inexpensive means of fast coastline mapping from remotely sensed imagery with relatively fine-to-moderate spatial resolution in coastal sectors with intense human interference.

Description: A study was undertaken to assess Envisat Advanced Synthetic Aperture Radar (ASAR) ScanSAR data for quantifying forest growing stock volume (GSV) across three boreal regions with varying forest types, composition, and structure (Sweden, Central Siberia, and Québec). Estimates of GSV were obtained using hyper-temporal observations of the radar backscatter acquired by Envisat ASAR with the BIOMASAR algorithm. In total, 5.3×106 km2 were mapped with a 0.01° pixel size to obtain estimates representative for the year of 2005. Comparing the SAR-based estimates to spatially explicit datasets of GSV, generated from forest field inventory and/or Earth Observation data, revealed similar spatial distributions of GSV. Nonetheless, the weak sensitivity of C-band backscatter to forest structural parameters introduced significant uncertainty to the estimated GSV at full resolution. Further discrepancies were observed in the case of different scales of the ASAR and the reference GSV and in areas of fragmented landscapes. Aggregation to 0.1° and 0.5° was then undertaken to generate coarse scale estimates of GSV. The agreement between ASAR and the reference GSV datasets improved; the relative difference at 0.5° was consistently within a magnitude of 20–30%. The results indicate an improvement of the characterization of forest GSV in the boreal zone with respect to currently available information.

Description: The main purpose of this paper is to evaluate the global performance and to assess the current trends in research of water resource management. The methods of informetric analysis were used to survey water resource management related articles in the Science Citation Index (SCI) and Social Science Citation Index (SSCI) during the past decades. The publication records, subjects, journals, countries, institutes, authors, citations and keywords were analyzed respectively for each paper. The number of papers related to water resource management in 2012 was approximately 8 times that of the year 2000 and hundreds of times more than early 1990s. Water resource management related papers were distributed unevenly by countries. The USA, P.R. China, Australia and UK were the top contributing countries, also present normalized by dividing with population that published most SCI papers as well as SSCI papers. The largest water resource management research center is located in the USA according to the number of publications and citations, with P.R. China becoming more proficient in water resource management according to the data from country and institute. In addition, the quality of papers produced by developed countries is more advanced than developing countries. All these efforts contributed to the indication in trends of water resource management research on a global scale. Earlier water resource management research appeared and was originally concentrated on engineering, irrigation and geography. Issues gradually transferred to management, economics and regime recently.

Description: With a growing awareness of water pollution problems, in recent years there has been a considerable increased effort in developing and applying numerical models to predict accurately the contaminant distributions, particularly in free surface flows. This numerical study presents a predictive hydrodynamic model in order to explore the dispersion phenomenon of a pollutant injected from time-dependent sources in a turbulent free surface flow. More precisely, we study the impact of pulsation on the dispersion of an injected material. The air/water interface was modeled with the volume of fluid method and sharpness of the free surface was assured by means of Geo-Reconstruct scheme. The numerical results showed that the pulsation played a dominant role at the early stage of the pollutant transport. It was also observed that the pulsation affected the distribution of the injected material especially near the front and that a major swirling action was developed compared to the constant-rate-injection case.

Description: A remote sensing-based approach to estimate actual evapotranspiration ( ET ) was tested in an area covered by olive trees and characterized by Mediterranean climate. The methodology is a modified version of the standard FAO-56 dual crop coefficient procedure, in which the crop potential transpiration, T p, is obtained by directly applying the Penman-Monteith (PM) equation with actual canopy characteristics (i.e., leaf area index, albedo and canopy height) derived from optical remote sensing data. Due to the minimum requirement of in-situ ancillary inputs, the methodology is suitable also for applications on large areas where the use of tabled crop coefficient values become problematic, due to the need of corrections for specific crop parameters, i.e., percentage of ground cover, crop height, phenological cycles, etc. The methodology was applied using seven airborne remote sensing images acquired during spring-autumn 2008. The estimates based on PM approach always outperforms the ones obtained using simple crop coefficient constant values. Additionally, the comparison of simulated daily evapotranspiration and transpiration with the values observed by eddy correlation and sap flow techniques, respectively, shows a substantial agreement during both dry and wet days with an accuracy in the order of 0.5 and 0.3 mm d −1 , respectively. The obtained results suggest the capability of the proposed approach to correctly partition evaporation and transpiration components during both the irrigation season and rainy period also under conditions of significant reduction of actual ET from the potential one.

Description: The Multi-angle Imaging SpectroRadiometer (MISR) instrument aboard the Terra satellite acquires imagery at 275-m resolution at nine angles ranging from 0° (nadir) to 70° off-nadir. This multi-angle capability facilitates the stereoscopic retrieval of heights and motion vectors for clouds and aerosol plumes. MISR’s operational stereo product uses this capability to retrieve cloud heights and winds for every satellite orbit, yielding global coverage every nine days. The MISR INteractive eXplorer (MINX) visualization and analysis tool complements the operational stereo product by providing users the ability to retrieve heights and winds locally for detailed studies of smoke, dust and volcanic ash plumes, as well as clouds, at higher spatial resolution and with greater precision than is possible with the operational product or with other space-based, passive, remote sensing instruments. This ability to investigate plume geometry and dynamics is becoming increasingly important as climate and air quality studies require greater knowledge about the injection of aerosols and the location of clouds within the atmosphere. MINX incorporates features that allow users to customize their stereo retrievals for optimum results under varying aerosol and underlying surface conditions. This paper discusses the stereo retrieval algorithms and retrieval options in MINX, and provides appropriate examples to explain how the program can be used to achieve the best results.

Description: Roads play an indispensable role as part of the infrastructure of society. In recent years, society has witnessed the rapid development of laser mobile mapping systems (LMMS) which, at high measurement rates, acquire dense and accurate point cloud data. This paper presents a way to automatically estimate the required excavation volume when widening a road from point cloud data acquired by an LMMS. Firstly, the input point cloud is down-sampled to a uniform grid and outliers are removed. For each of the resulting grid points, both on and off the road, the local surface normal and 2D slope are estimated. Normals and slopes are consecutively used to separate road from off-road points which enables the estimation of the road centerline and road boundaries. In the final step, the left and right side of the road points are sliced in 1-m slices up to a distance of 4 m, perpendicular to the roadside. Determining and summing each sliced volume enables the estimation of the required excavation for a widening of the road on the left or on the right side. The procedure, including a quality analysis, is demonstrated on a stretch of a mountain road that is approximately 132 m long as sampled by a Lynx LMMS. The results in this particular case show that the required excavation volume on the left side is 8% more than that on the right side. In addition, the error in the results is assessed in two ways. First, by adding up estimated local errors, and second, by comparing results from two different datasets sampling the same piece of road both acquired by the Lynx LMMS. Results of both approaches indicate that the error in the estimated volume is below 4%. The proposed method is relatively easy to implement and runs smoothly on a desktop PC. The whole workflow of the LMMS data acquisition and subsequent volume computation can be completed in one or two days and provides road engineers with much more detail than traditional single-point surveying methods such as Total Station or GPS profiling. A drawback is that an LMMS system can only sample what is within the view of the system from the road.

Description: Seasonality characteristics and spatio-temporal trends of 7-day low flows were investigated for the 41,470 km 2 semi-arid Karkheh watershed (western Iran), representing 12 stations with record length of 51 years (1958–2008). Hierarchical Cluster Analysis (HCA) was used to identify low-flow seasonality (clusters of low flow seasons). Monotonic trends were detected by the Mann-Kendall test. Breaks in low flow trends were detected by the Lombard’s change point test. Breaks in short-term trends were detected by the Lepage test. According to results seasonal clusters were different in most of the stations, indicating uniqueness in station low flow behaviour. Among the 12 stations studied, four stations showed seasonal monotonic trend and change points, some with abrupt change (change point in consecutive years). Two stations near watershed outlet with no monotonic trend showed abrupt change. Most seasonal change points (dates) compared well with documented droughts, highlighting drought impacts on low flow trends at affected stations. The Lepage test detected change point in seasonal low flow trends of most stations during 5- and 10-year periods. This research has shown that in semi-arid environments low flow seasonality characteristics may vary among stations, an indication that low flow trends should be evaluated individually for each station.

Description: The present paper explores the characteristics of turbulent flow and drag over two artificial 2-D forward-facing waveform structures with two different stoss side slopes of $50^{\circ }$ 50 ∘ and $90^{\circ },$ 90 ∘ , respectively. Both structures possessed a common slanted lee side slope of $6^{\circ }.$ 6 ∘ . Flume experiments were conducted at the Fluvial Mechanics Laboratory of Indian Statistical Institute, Kolkata. The velocity data were analyzed to identify the spatial changes in turbulent flow addressing the flow separation region with recirculating eddy, the Reynolds stresses, the turbulent events associated with burst-sweep cycles and the drag over two upstream-facing bedforms for Reynolds number $Re_h=1.44\times 10^5.$ R e h = 1.44 × 10 5 . The divergence at the stoss side slope between the two structures revealed significant changes in the mean flow and turbulence. Comparison showed that during the flood-tide condition there was no flow separation region on the gentle lee side of the structure with smaller slope at the stoss side, while for the other structure with vertical stoss side slope a thick flow separation region with recirculating eddy was observed at the gentle lee side just downstream of the crest. The recirculating eddy induced on the lee-side had a strong influence on the resistance that the structure exerts to the flow due to loss of energy through turbulence. In contrast, a great amount of reduction in drag was observed in the case of smaller stoss side sloped structure as there was no flow separation. The quadrant analysis was also used to highlight the turbulent event evolution along the bed form structures under flood-tide conditions.

Description: Der Klimawandel und seine Auswirkungen stellen die Raumplanung vor neue Herausforderungen, die trotz der damit verbundenen Komplexität und Unsicherheit eine nachhaltige zukunftsfähige Entwicklung gewährleisten soll. Diese Herausforderungen waren Gegenstand eines Szenario-Planungs-Prozesses für den Stadt-Umland-Raum Rostock, in dessen Rahmen Strategien und Ziele für die Anpassung an die Folgen des Klimawandels erarbeitet wurden. Der Prozess bezog dabei intensiv zentrale lokale und regionale Akteure ein. Aufbauend auf einer Analyse von relevanten Einflussfaktoren der zukünftigen Flächenentwicklung aus den Bereichen soziale/gesellschaftliche Aspekte, ökologische Aspekte, ökonomische und politische Aspekte sowie von möglichen Klimaänderungen wurden Szenarien erstellt. Diese verknüpfen unterschiedlich starke Auswirkungen des Klimawandels mit unterschiedlichen gesellschaftlichen und ökologischen Entwicklungen zu Szenarien der zukünftigen Flächenentwicklung des Stadt-Umland-Raums. Diese Szenarien ermöglichen der Stadt- und Regionalplanung die Berücksichtigung einer Bandbreite von alternativen Zukünften sowie eine Beurteilung der Wechselbeziehungen sowohl zwischen den relevanten Einflussfaktoren untereinander als auch zwischen den Faktoren und den Klimawandelauswirkungen. Der Szenario-Planungs-Prozess im Stadt-Umland-Raum Rostock hat gezeigt, dass die Szenariotechnik der Planung die Möglichkeit geben kann, mit zentralen Herausforderungen des Klimawandels wie Komplexität und Unsicherheit umzugehen und dies auch in die Zusammenarbeit mit lokalen und regionalen Akteuren zu integrieren. Dies wurde als eine innovative und sinnvolle Methode bewertet, die in der bisherigen Planungspraxis häufig noch nicht in dieser integrierenden Form umgesetzt wird. Die Szenarien dienen als Grundlage für die Erarbeitung konkreter Anpassungsstrategien und -maßnahmen. Der angestoßene Dialog unter den teilnehmenden Akteuren kann zudem die spätere Umsetzung von konkreten Maßnahmen erleichtern.

Description: Characteristics of determination of the bearing capacity of piles in soils prone to slumptype settlement are examined. It is proposed that characteristics be computed not based on the flow index, but on the void ratio.

Description: With the transformation of water conservancy from traditional to eco-hydraulic aiming at sustainable development, the study on eco-efficiency of the water system has attracted a great deal of attention. This study aims to develop a methodology for evaluating the eco-efficiency of water systems of 31 administrative regions in China. Considering the multiple attributes of water systems and a piecewise linear technological frontier, the Rough Set Theory (RST) and Data Envelopment Analysis model (DEA) are combined to analyze the eco-efficiency of water systems. An input-and-output index system is established based on RST. The eco-efficiency for the water system of 31 administrative regions in China is calculated by DEA, and the characteristics of its spatial differences are discussed. The results show that there is a significant difference in the eco-efficiency of water systems: (1) On the whole, the efficiency value of north China is slightly higher than the south; (2) In the eight sub-regions of China, the north coastal area gains the highest efficiency score and the middle reaches of the Yangtze River obtains the lowest value; (3) There are 11 out of 31 regions at the best practice frontier. The spatial difference in eco-efficiency of the water system is a common phenomenon, which reflects the direct or indirect influence by economical, political, legislative, historical, cultural factors and other social development. Based on the above findings, some suggestions are made to improve the eco-efficiency of the water systems in China.

Description: The slow movement of active deep-seated slope gravitational deformations (DSGSDs) and deep-seated rockslides can cause damage to structures and infrastructures. We use Permanent Scatterers Synthetic Aperture Radar Interferometry (PSInSAR™) displacement rate data for the analysis of DSGSD/rockslide activity and kinematics and for the analysis of damage to buildings. We surveyed the degree of damage to buildings directly in the field, and we tried to correlate it with the superficial displacement rate obtained by the PSInSAR™ technique at seven sites. Overall, we observe that the degree of damage increases with increasing displacement rate, but this trend shows a large dispersion that can be due to different causes, including: the uncertainty in the attribution of the degree of damage for buildings presenting wall coatings; the complexity of the deformation for large phenomena with different materials and subjected to differential behavior within the displaced mass; the absence of differential superficial movements in buildings, due to the large size of the investigated phenomena; and the different types of buildings and their position along the slope or relative to landslide portions.

Description: A 30-year series of global monthly Normalized Difference Vegetation Index (NDVI) imagery derived from the Global Inventory Modeling and Mapping Studies (GIMMS) NDVI3g archive was analyzed for the presence of trends in changing seasonality. Using the Seasonal Trend Analysis (STA) procedure, over half (56.30%) of land surfaces were found to exhibit significant trends. Almost half (46.10%) of the significant trends belonged to three classes of seasonal trends (or changes). Class 1 consisted of areas that experienced a uniform increase in NDVI throughout the year, and was primarily associated with forested areas, particularly broadleaf forests. Class 2 consisted of areas experiencing an increase in the amplitude of the annual seasonal signal whereby increases in NDVI in the green season were balanced by decreases in the brown season. These areas were found primarily in grassland and shrubland regions. Class 3 was found primarily in the Taiga and Tundra biomes and exhibited increases in the annual summer peak in NDVI. While no single attribution of cause could be determined for each of these classes, it was evident that they are primarily found in natural areas (as opposed to anthropogenic land cover conversions) and that they are consistent with climate-related ameliorations of growing conditions during the study period.

Description: Coastal ecosystems generate diverse services, such as protection, production of food, climate regulation and recreation across the globe. These services are vital for extremely vulnerable coastal areas for enhancing present and future adaptation capacity under changing climate. Bangladesh has long coastline which provides opportunities to large population for multiple resource uses; and threats from extreme natural disasters. The CBACC-Coastal Afforestation is the priority initiative of Bangladesh NAPA that has come in actions under first LDCF adaptation project. The project has focused to reduce climatic vulnerability through enhancing resilience of coastal forests and adaptive capacity of communities. With a total of 6,100 ha of new mangrove plantation and introducing 10 important mangrove species in existing monoculture areas, the project increased protective and carbon rich forest coverage, and also functional capacity of coastal vegetation to adapt to current and future climatic shocks. Concurrently, the project developed co-benefit regime for community based adaptation through innovating integrated land uses for livelihoods of adjacent households. A new land use model (Forest, Fish and Fruit-Triple F) has been implemented to restore fallow coastal lands into community based livelihood adaptation practices. The Triple F practice has reduced inundation and salinity risks and freshwater scarcity in cultivation of agricultural crops and fish. The rational land uses improved household adaptation capacity of landless households through short-, mid- and long-term income generation. The project lesson has further focus to justify the land use innovation for harnessing potential opportunities of ecosystem based adaptation in coastal Bangladesh.

Description: In the winter of 2006/2007 approximately 200,000 m 3 of high quality sand from the dredging of the local marina were placed at the ocean-side beaches in the vicinity of a tourism development in Tróia, Portugal. The beach-quality sediment provided a source of “sand of opportunity” which was used to increase the dry-beach width of the highly used coastal stretch. The sediment was placed along approximately 600 m of shoreline and a monitoring program has since being carried out twice a year. High-resolution topographic surveys and sediment analysis are being conducted to evaluate the performance and response of the fill to the local forcing factors and ultimately to evaluate the effectiveness of the fill project. Two years after the nourishment, the sediment has been distributed both cross-shore and alongshore. The pre-nourishment beach slope was attained and the new shoreline has acquired a natural shape. Berm width increased by a maximum of 100 m, and a set of new dune ridges has developed, due to sand accumulation promoted by the settlement of vegetation. In conclusion, 2 years after its completion, the beach nourishment in Tróia can be viewed as a successful project in which the beneficial use of dredged material resulted in: 1) area for increased dune field growth and development, 2) enhancement of potential shorebird nesting areas and habitat, and 3) increased area for recreation purposes.

Description: Community complexity and abiotic conditions are key components of environmental heterogeneity that affect the abundance and distribution of species. In this study we evaluated how environmental conditions affect abundances of supralittoral amphipods (Talitridae) in four habitats (sandy beach, rivermouth, wrack and lakeshore), along the Italian peninsula in the Mediterranean Sea. All samplings covered a 12 month period, and used the same sampling methodology thereby enabling comparison of abundances and species composition and richness. Four species ( Talitrus saltator (Montagu, 1808), Orchestia gammarellus (Pallas, 1766), O. montagui Audouin 1826, O. cf. cavimana Heller 1865) were collected in the different habitats, but most species were found or were abundant in only one of the four habitats. Abundances of talitrids (numbers per sampling hour) differed significantly among the habitats with highest abundances found in the wrack and on the riverbank in proximity to an estuary, and lowest abundances observed on four sandy beach sites. Environmental conditions (temperature, moisture, substrate penetrability) differed among the habitats and were associated with some of the among-site variability in abundances. Our findings demonstrate that talitrids thrive better in some supralittoral habitats than others, and that some habitats could be considered to be “hotspots” of talitrid ecology and biodiversity.

Description: In this paper we investigate the regional variations in the fragmentation of urban landcover among 86 metropolitan areas and 19 megapolitan areas in the United States. Urban fragmentation was evaluated using nine spatial metrics that collectively quantified the continuity and shape complexity of urban landcover. Spatial metrics were calculated for each metropolitan and megapolitan area using a high urban threshold containing the urban core and surrounding suburbs, and a low urban threshold that further encompassed the outer exurban fringe. A principal component analysis was used to collapse the nine spatial metrics into two components of urban form: “shape complexity”, which describes the porosity of the urban fabric, and urban “continuity”, which represents the aggregation of urban patches or pixels. Urban “continuity”, and seven of nine spatial metrics, varied significantly by U.S. census region. A hot-spot analysis further revealed a high degree of spatial autocorrelation, with metropolitan areas in the Northeast and South regions generally exhibiting a more fragmented urban landscape than those in the Midwest or West regions. Relative to metropolitan areas, megapolitan areas exhibited more complex and fragmented patterns of urban landcover, presumably due to the high level of inter- and intra-urban polycentricism at this broader scale.

Description: Urbanization is increasingly becoming a widespread phenomenon at all scales of development around the globe. Be it developing or developed nations, all are witnessing urbanization at very high pace. In order to study its impacts, various methodologies and techniques are being implemented to measure growth of urban extents over spatial and temporal domains. But urbanization being a very dynamic phenomenon has been facing ambiguities regarding methods to study its dynamism. This paper aims at quantifying urban expansion in Delhi, the capital city of India. The process has been studied using urban land cover pattern derived from Landsat TM/ETM satellite data for two decades (1998–2011). These maps show that built-up increased by 417 ha in first time period (1998–2003) and 6,633 ha during next period (2003–2011) of study. For quantification of metrics for urban expansion, the Urban Landscape Analysis Tool (ULAT) was employed. Land cover mapping was done with accuracy of 92.67 %, 93.3 % and 96 % respectively for years 1998, 2003 and 2011. Three major land covers classes mapped are; (i) built-up, (ii) water and (iii) other or non-built-up. The maps were then utilized to extract degree of urbanization based on spatial density of built-up area consisting of seven classes, (i) Urban built-up, (ii) Suburban built-up,(iii) Rural built-up, (iv) Urbanized open land, (v) Captured open land, (vi) Rural open land and (vii) Water. These classes were demarcated based on the urbanness of cells. Similarly urban footprint maps were generated. The two time maps were compared to qualitatively and quantitatively capture the dynamics of urban expansion in the city. Along with urbanized area and urban footprint maps, the new development areas during the study time periods were also identified. The new development areas consisted of three major categories of developments, (i) infill, (ii) extension and (iii) leapfrog.

Description: With the availability of very high resolution multispectral imagery, it is possible to identify small features in urban environment. Because of the multiscale feature and diverse composition of land cover types found within the urban environment, the production of accurate urban land cover maps from high resolution satellite imagery is a difficult task. This paper demonstrates the potential of 8 bands capability of World View 2 satellite for better automated feature extraction and discrimination studies. Multiresolution segmentation and object based classification techniques were then applied for discrimination of urban and vegetation features in a part of Dehradun, Uttarakhand, India. The study demonstrates that scale, colour, shape, compactness and smoothness have a significant influence on the quality of image objects achieved, which in turn governs the classified result. The object oriented analysis is a valid approach for analyzing high spatial and spectral resolution images. World View 2 imagery with its rich spatial and spectral information content has very high potential for discrimination of the less varied varieties of vegetation.

Description: Rice crop occupies an important aspect of food security and also contributes to global warming via GHGs emission. Characterizing rice crop using spatial technologies holds the key for addressing issues of global warming and food security as different rice ecosystems respond differently to the changed climatic conditions. Remote sensing has become an important tool for assessing seasonal vegetation dynamics at regional and global scale. Bangladesh is one of the major rice growing countries in South Asia. In present study we have used remote sensing data along with GIS and ancillary map inputs in combination to derive seasonal rice maps, rice phenology and rice cultural types of Bangladesh. The SPOT VGT S10 NDVI data spanning Aus, Aman and Boro crop season (1 st May 2008 to 30 th April 2009) were used, first for generating the non-agriculture mask through ISODATA clustering and then to generate seasonal rice maps during second classification. The spectral rice profiles were modelled and phenological parameters were derived. NDVI growth profiles were modelled and crop calendar was derived. To segregate the rice cultural types of Bangladesh into IPCC rice categories, we used elevation, irrigated area, interpolated rainfall maps and flood map through logical modelling in GIS. The results indicated that the remote sensing derived rice area was 9.99 million ha as against the reported area of 11.28 million ha. The wet and dry seasons accounted for 64% and 36 % of the rice area, respectively. The flood prone, drought prone and deep water categories account for 7.5%, 5.56% and 2.03%, respectively. The novelty of current findings lies in the spatial outcome in form of seasonal and rice cultural type maps of Bangladesh which are helpful for variety of applications.

Description: Gravity Recovery And Climate Experiment (GRACE) satellites were launched on March 17 2002 to derive with unprecedented accuracy, estimates of the global high resolution model of the earth’s gravity field. Local gravity changes with change in mass or mass redistribution. The mass changes can be due to hydrological events, seismic events or postglacial rebound, majorly. GRACE is sensitive to changes at large spatial scale since the resolution of GRACE is 400 km. Hydrological activities over basins provide sufficient mass changes to be detected by GRACE. In this research paper the discussion would be about two major flooding events in India, one being the 2005 monsoon flooding in Mumbai and nearby states and other being flood experienced by Bihar in 2008. The GRACE data is in the form of matrix consisting spherical harmonic coefficients. These coefficients are processed to obtain mass changes in terms of equivalent water height at a spatial scale of 400 km. The strategy of analysis is also discussed which need to be followed depending upon limitations of GRACE observation and requirement of application, here in this case application is flood induced mass change detection. Time-series and residual plots are generated and they show the flooding events for the concerned area as outliers. Better visualisation is obtained by residual plot, if there is a trend or systematic behaviour in time-series. This work points towards the qualitative capability of GRACE to detect flooding events at large spatial scale. Quantitative analysis requires in-situ data over the period of GRACE which is not possible for the cases discussed here.

Description: Biodiversity maps are crucial to conservation management. The present study assesses the accuracy of detecting tree diversity in an Italian forest site by combining mid-resolution images from Landsat-TM or Advanced Land Observation Satellite (ALOS)’s Advanced Visible and Near Infrared Radiometer type 2 (AVNIR-2) sensors with environmental data namely elevation, slope, aspect and solar radiation in an artificial Neural Network (NN) classifier. The map accuracies obtained for Landsat-TM and ALOS images are 60 % and 53 % respectively. Use of environmental data increases accuracies to 91 % and 81 % respectively. Landsat-TM detects tree diversity more accurately than ALOS. Both the coarser pixel size and finer spectral resolution of Landsat-TM contributed to its higher accuracy.

Description: Spatial and temporal distribution of chlorophyll a (chl a ) and Total Suspended Matter (TSM) and inter comparison of Ocean Color Monitor-2 (OCM-2) and Moderate Resolution Imaging Spectro-radiometer (MODIS-Aqua) derived chlorophyll a and TSM was made along the southwest Bay of Bengal (BoB). The in-situ chl a and TSM concentration measured during different seasons were ranged from 0.09 to 10.63 μgl −1 and 11.04–43.75 mgl −1 respectively. OCM-2 and MODIS derived chl a showed the maximum (6–8 μgl −1 ) at nearshore waters and the minimum (0–1 μgl −1 ) along the offshore waters. OCM-2 derived TSM imageries showed the maximum (50–60 mgl −1 ) along the nearshore waters of Palk Strait and the moderate concentration (2–5 mgl −1 ) was observed in the offshore waters. MODIS derived minimum TSM concentration (13.244 mgl −1 ) was recorded along the offshore waters, while the maximum concentration of 15.78 mgl −1 was found along the Kodiakarai region. The inter-comparison of OCM-2 and MODIS chl a data ( R 2  = 0.549, n  = 49, p  〈 0.001, SEE = ±0.117) indicate that MODIS data overestimates chl a concentration in the nearshore waters of the southern BoB compared to the OCM-2. The correlation between OCM-2 and MODIS-Aqua TSM data ( R 2  = 0.508, N  = 53, P  〈 0.001 and SEE = ±0.024) confirms that variation in the range of values measured by OCM-2 (2–60 mgl −1 ) and the MODIS (13–16 mgl −1 ) derived TSM values. Despite problems in range of measurements, persistent cloud cover etc., the launch of satellites like OCM-2 with relatively high spatial resolutions makes job easier and possible to monitor chl a distribution and sediment discharges on day to day basis in the southwest BoB.

Description: Road extraction from remotely sensed images has always been a challenging problem. In this paper we present an approach for road extraction based on topological derivative and mathematical morphology. The road extraction scheme has three main steps: image segmentation using topological derivative, road cluster identification and road cluster filtering using mathematical morphology.

Description: The study evaluates and compares Digital Elevation Model (DEM) data of various grid spacing derived using high resolution Cartosat 1 stereo data for hydrologic applications. DEM is essential in modeling different environmental processes which depend on surface elevation. The accuracy of derived DEM varies with grid spacing and source. The CartoDEM is the photogrammetric DEM derived from stereo pairs. Damanganga basin lying in the Western Ghats was analysed using 11 Carto stereo pairs. The process of triangulation resulted in RMSE of 0.42. DEM was extracted at 10 m, 20 m, 30 m, 40 m, 50 m and 90 m grid spacing and compared with ASTER GDEM (30 m) and SRTM DEM (90 m). DEM accuracy was checked with Root Mean Square Error (RMSE) statistic for random points generated in different elevation zones. Extracted stream networks were compared based on Correctness Index and Figure of Merit index, calculated for all the Digital Elevation Models at varying cell sizes. In order to further evaluate the DEM’s, a simple flood simulation with no water movement and no consideration of real time precipitation data was carried out and relationship between heights of flood stage and inundation area for each Digital Elevation Model was also established.

Description: Hydrologic analysis of microwatersheds is essential for water resources planning at large scale. Space based input for decentralized planning at panchayat level use high resolution DEM. Drainage and slope play important role in planning and Digital Elevations Models (DEM) are widely being used for estimation of hydrologic parameters which are useful as input for hydrologic models. The estimates vary as per resolution and type of DEM. This paper evaluates the suitability of DEM derived through Cartosat-1 satellite stereo data(CartoDEM) for hydrologic parameter estimation of microwatersheds and compares the results with Airborne Laser Terrain Mapper (ALTM) based DEM data. Comparison is based on the hydrologic parameters delineated in Geographical Information System. Microwatersheds are delineated and drainage length extracted using two different cell sizes for both DEMs. Correctness Index, Figure of Merit, visual comparison, Percent within buffer and Junction comparison method, compared extracted river network. Average watershed slope is calculated using three different methods. CartoDEM derived drainage is comparable with ALTM derived drainage. There is high correlation between Carto5 and Caro10 DEMs in terms of drainage delineation and slope calculation. Average watershed slope vary as per calculation methods but average channel slope value (S3) although less, is comparable across DEMs.

Description: Drought severity and duration are usually modelled independently. However, these two characteristics are known to be related. To model this relationship, a joint distribution of drought severity and duration using a bivariate copula model is proposed and applied to daily rainfall data (1976–2007) of 30 rain gauge stations in Peninsular Malaysia. The drought characteristics are classified using the standardized precipitation index (SPI) and their univariate marginal distributions are further identified by fitting exponential, gamma, generalized extreme value, generalized gamma, generalized logistics, generalized pareto, gumbel max, gumbel min, log-logistic, log-pearson3, log-normal, normal, pearson 5, pearson 6 and weibull distributions. The three-parameter log-normal distribution is identified as the best fitting distribution for drought severity while the generalized pareto distribution is determined as the most appropriate distribution for drought duration with respect to the application of the Anderson-Darling procedure. The dependency among the drought properties is analysed using Kendall’s τ method. The maximum likelihood estimation of the univariate marginal distributions and the maximisation of the bivariate likelihood are employed to compute the Akaike Information Criterion (AIC) values in verifying the best fitting copula distribution. The Galambos distribution is recognised as the most appropriate copula distribution for describing the relationship between drought severity and duration. The conditional drought probability and drought return period are further described to explain the drought properties comprehensively. The probabilities of drought occurrences under certain circumstances with a specific seriousness or duration can be determined in order to verify the possibility of drought episodes. The return period of a recurrent drought has also been investigated to identify the time-interval for repeated drought occurrences under similar situation.

Description: Model-supported real-time flood control requires the development of effective and efficient hydraulic models. As large numbers of iterations are to be executed in optimization procedures, the hydraulic model needs to be computationally efficient. At the same time, it is also required to generate high-accuracy results. Therefore, an identification and calibration procedure was developed for the purpose of having this conceptual model built up and calibrated based on a limited number of simulations with a more detailed full hydrodynamic model. The performance of the conceptual model was evaluated for historical events under different regulation conditions. Robustness test results show close agreement, with Nash-Sutcliffe Efficiency values higher than 0.90. In addition, it is found that the conceptual model is capable of accomplishing simulation of historical flood events within few seconds. That is much faster than the detailed full hydrodynamic model, which enables the conceptual model to be applied for real-time flood control.

Description: The purpose of this study is to experimentally determine the differences between four grazing treatments on the trampling of nests. Additionally, we examine to what extent the trampling probability of nests is higher close to a source of fresh water. We compare the trampling of artificial nests in five different grazing treatments in an experimental design. We use buried clay pigeon targets as artificial mimics of bird nests to obtain reliable estimates of trampling risk and compare these with real nests. We find that horses trample significantly more artificial nests than cattle resulting in lower survival rates of artificial nests under horse grazing than under cattle grazing. For both horses and cattle, we find a clear trend, approaching significance, towards more trampling at higher numbers of livestock. We found that more artificial nests are trampled closer to a freshwater tank. The survival probability of artificial nests in cattle grazed treatments in this study is found to be in the same range as real nests in the study area and very close to the survival probability of Northern Lapwing ( Vanellus vanellus ) nests under cattle grazing in a different system. We recommend that horses should not be used as grazers for management purposes in areas with high densities of birds’ nests in order to minimize the risk of nests being trampled. Additionally, we confirm that the location of freshwater tanks has an important effect on the distribution of livestock and hence on trampling of nests.

Description: A procedure for codification of the deformation characteristics of thawing clayey soil is analyzed through an example of the processing of data acquired from compression tests. Results of prognostic settlement calculation based on a regression equation are compared with experimental data.

Description: In this study, the performance of M5 model tree and conventional method for converting pan evaporation data (E p ) to reference evapotranspiration (ET 0 ) were assessed in semi-arid regions. Conventional method uses pan coefficient (K p ) as a factor to convert E p to ET 0 . Two common K p equations for pans with dry fetch (Allen et al. 1998 ; Abdel-Wahed and Snyder in J Irrig Drain Eng 134(4):425–429, 2008 ) were considered for the comparison. The values of ET 0 derived using these three methods were compared to those estimated using the reference FAO Penmane Monteith (FAO-PM) method under semi-arid conditions of the Khuzestan plain (Southwest Iran). The results showed that the M5 model is the best one to estimate ET 0 over test sites (0.5 mm d −1 of root mean square error (RMSE) and 0.98 of coefficient of determination ( R 2 ). Conversely, the performance of the two K p equations was poor.

Description: Problems of the reinforcement of pile foundations during the reconstruction of buildings are examined. Schemes for strengthening by the method of active inclusion of a raft and results of practical application are presented. Trends are suggested for investigations concerning refinement of the procedure employed for strengthening a foundation.

Description: Geomorphologic information, topographic maps (dated 1967), aerial photographs (dated 1999 and 2008), and spatial analysis procedures were used to investigate a 90 km long coastal sector in South Sicily (Italy). Information was obtained on coastal erosion/accretion areas, general sediment circulation pattern and littoral cell distribution. Human-made structures and natural headlands constituted important artificial limits dividing littoral in morphological cells. Ports and harbours were observed at Scoglitti, Punta Secca, Marina di Ragusa, Donnalucata and Pozzallo. Most of them worked as “transit” limits which interrupted predominant, eastward directed sedimentary transport, this way generating accretion in updrift (west) side of mentioned structures and erosion in downdrift (east) side. During the 1967–2008 period, about 62,000 m 2 and 42,000 m 2 of beach surface were respectively formed updrift of Scoglitti and Donnalucata ports. The construction of Pozzallo port gave rise to the formation of a “convergent” limit which favoured large accretion (94,000 m 2 ) east of port structure. Most important natural structures were observed at Punta Zafaglione, P. Braccetto and Cava d’Aliga. The knowledge of littoral cell distribution acquires a great importance for appropriate management of coastal erosion processes which may be mitigated installing by-passing systems in ports and harbours and carrying out nourishment works in eroding areas, often located downdrift of ports and harbours (when these structures work as transit limits) and in central part of littoral cells (when these structures work as convergent limits).

Description: The coastal stretch of north-eastern Mediterranean Morocco holds vitally important ecological, social, and economic functions. The implementation of large-scale luxury tourism resorts shall push socio-economic development and facilitate the shift from a mainly agrarian to a service economy. Sufficient water availability and intact beaches are among the key requirements for the successful realization of regional development plans. The water situation is already critical, additional water-intense sectors could overstrain the capacity of water resources. Further, coastal erosion caused by sea-level rise is projected. Regional climate change is observable, and must be included in regional water management. Long-term climate trends are assessed for the larger region (Moulouya basin) and for the near-coastal zone at Saidia. The amount of additional water demand is assessed for the large-dimensioned Saidia resort; including the monthly, seasonal and annual tourist per capita water need under inclusion of irrigated golf courses and garden areas. A shift of climate patterns is observed, a lengthening of the dry summer season, and as well a significant decline of annual precipitation. Thus, current water scarcity is mainly human-induced; however, climate change will aggravate the situation. As a consequence, severe environmental damage due to water scarcity is likely and could impinge on the quality of local tourism. The re-adjustment of current management routines is therefore essential. Possible adjustments are discussed and the analysis concludes with management recommendations for innovative regional water management of tourism facilities.

Description: Characterizing the specific inherent optical properties (SIOPs) of water constituents is fundamental to remote sensing applications. Therefore, this paper presents the absorption properties of phytoplankton, gelbstoff and tripton for three small, optically-diverse South African inland waters. The three reservoirs,  Hartbeespoort, Loskop and Theewaterskloof, are challenging for remote sensing, due to differences in phytoplankton assemblage and the considerable range of constituent concentrations. Relationships between the absorption properties and biogeophysical parameters, chlorophyll-a (chl-a), TChl (chl-a plus  phaeopigments),  seston,  minerals  and  tripton, are established. The value determined for the mass-specific tripton absorption coefficient at 442 nm, a∗ (442), ranges from 0.024 to 0.263 m2·g−1. The value of the TChl-specific phytoplankton absorption coefficient (a∗ ) was strongly influenced by phytoplankton species, size, accessory pigmentation and biomass. a∗ (440) ranged from 0.056 to 0.018 m2·mg−1 in oligotrophic to hypertrophic waters. The positive relationship between cell size and trophic state observed in open ocean waters was violated by significant small cyanobacterial populations. The phycocyanin-specific phytoplankton  absorption  at  620  nm,  a∗ (620), was determined as 0.007 m2·g−1 in a M. aeruginosa bloom. Chl-a was a better indicator of phytoplankton biomass than phycocyanin (PC) in surface scums, due to reduced accessory pigment production. Absorption budgets demonstrate that monospecific blooms of M. aeruginosa and C. hirundinella may be treated as “cultures”, removing some complexities for remote sensing applications.   These results contribute toward a better understanding of IOPs and remote sensing applications in hypertrophic inland waters. However, the majority of the water is optically complex, requiring the usage of all the SIOPs derived here for remote sensing applications. The SIOPs may be used for developing remote sensing algorithms for the detection of biogeophysical  parameters,  including chl-a, suspended matter, tripton and gelbstoff, and in advanced remote sensing studies for phytoplankton type detection.

Description: Europe is currently the leader in offshore wind energy, with the first offshore wind farm being installed in Denmark in 1991. As of 2010, there are 39 offshore wind farms in European waters with a combined operating capacity of 2,396 MW. Currently, the most used foundation type for offshore wind farms is the monopile. However, the increasing water depth and turbine size will slowly decrease the utilization of this solution. Among several other solutions, an interesting one might be the use of helical piles. The aim of this paper is to briefly describe the current foundation situation in the offshore wind farm industry and theoretical considerations with regard to the uplift capacity of the helical piles and their possible application in the offshore industry.

Description: Landcover change alters not only the surface landscape but also regional carbon and water cycling. The objective of this study was to assess the potential impacts of landcover change across the Kansas River Basin (KRB) by comparing local microclimatic impacts and regional scale climate influences. This was done using a 25-year time series of Normalized Difference Vegetation Index (NDVI) and precipitation (PPT) data analyzed using multi-resolution information theory metrics. Results showed both entropy of PPT and NDVI varied along a pronounced PPT gradient. The scalewise relative entropy of NDVI was the most informative at the annual scale, while for PPT the scalewise relative entropy varied temporally and by landcover type. The relative entropy of NDVI and PPT as a function of landcover showed the most information at the 512-day scale for all landcover types, implying different landcover types had the same response across the entire KRB. This implies that land use decisions may dramatically alter the local time scales of responses to global climate change. Additionally, altering land cover (e.g., for biofuel production) may impact ecosystem functioning at local to regional scales and these impacts must be considered for accurately assessing future implications of climate change.

Description: This paper describes the derivation of an analytical expression for the active seismic pressure of soil (ASPS) against a retaining wall backfilled with a cohesive soil. The failure surface is assumed to be planar. ASPS values obtained by the pseudo-static and pseudo-dynamic methods are compared for different factors. Parametric investigation has demonstrated that the pseudo-static method is more conservative as compared with the quasi-dynamic method, which reflects a nonlinear distribution of ASPS along the wall.

Description: Infiltration is the only way water enters soil on the cultivated slopes of the China’s Loess Plateau, so infiltration plays an important role in conserving soil moisture. The objective of this study was to investigate how a soil wetting front created by simulated rainfall migrated in soil with different types of surface roughness. The three types of soil surface treatments studied included surfaces of smooth, medium rough and rough soil. The results showed that, 1) compared with a smooth surface texture, medium rough and rough surface textures have a higher infiltration capacity; 2) the infiltration rate gradually decreases as the wetting front deepens and the rate tends stabilize over time. This change could be described by a logarithmic function; 3) at the early stage of rainfall, the wetting front of medium rough and rough surface textures varied greatly, while the variability of the wetting front decreases markedly after the infiltration rate stabilizes; 4) with increasing depth of the wetting front, the similarity between the wetting front and soil surface profile decreased significantly for the medium rough and rough surface textures. These results indicate that the process of infiltration on cultivated slopes on the Loess Plateau changed from a non-uniform pattern to a uniform pattern as time passed during a rainfall event. Overall, soils with rougher soil surfaces experienced a larger effect of roughness on the process of infiltration.

Description: The Receiver Operating Characteristic (ROC) is widely used for assessing the performance of classification algorithms. In GIScience, ROC has been applied to assess models aimed at predicting events, such as land use/cover change (LUCC), species distribution and disease risk. However, GIS software packages offer few statistical tests and guidance tools for ROC analysis and interpretation. This paper presents a suite of GIS tools designed to facilitate ROC curve analysis for GIS users by applying proper statistical tests and analysis procedures. The tools are freely available as models and submodels of Dinamica EGO freeware. The tools give the ROC curve, the area under the curve (AUC), partial AUC, lower and upper AUCs, the confidence interval of AUC, the density of event in probability bins and tests to evaluate the difference between the AUCs of two models. We present first the procedures and statistical tests implemented in Dinamica EGO, then the application of the tools to assess LUCC and species distribution models. Finally, we interpret and discuss the ROC-related statistics resulting from various case studies.

Description: The Nightfire algorithm detects and characterizes sub-pixel hot sources using multispectral data collected globally, each night, by the Suomi National Polar Partnership (NPP) Visible Infrared Imaging Radiometer Suite (VIIRS). The spectral bands utilized span visible, near-infrared (NIR), short-wave infrared (SWIR), and mid-wave infrared (MWIR). The primary detection band is in the SWIR, centered at 1.6 μm. Without solar input, the SWIR spectral band records sensor noise, punctuated by high radiant emissions associated with gas flares, biomass burning, volcanoes, and industrial sites such as steel mills. Planck curve fitting of the hot source radiances yields temperature (K) and emission scaling factor (ESF). Additional calculations are done to estimate source size (m2), radiant heat intensity (W/m2), and radiant heat (MW). Use of the sensor noise limited M7, M8, and M10 spectral bands at night reduce scene background effects, which are widely reported for fire algorithms based on MWIR and long-wave infrared. High atmospheric transmissivity in the M10 spectral band reduces atmospheric effects on temperature and radiant heat retrievals. Nightfire retrieved temperature estimates for sub-pixel hot sources ranging from 600 to 6,000 K. An intercomparison study of biomass burning in Sumatra from June 2013 found Nightfire radiant heat (MW) to be highly correlated to Moderate Resolution Imaging Spectrometer (MODIS) Fire Radiative Power (MW).

Description: The increasing availability of satellite imagery acquired by existing and new sensors allows a wide variety of new applications that depend on the use of diverse spectral and spatial resolution data sets. One of the pre-conditions for the use of hybrid image data sets is a consistent geo-correction capacity. We demonstrate how a novel fast template matching approach implemented on a graphics processing unit (GPU) allows us to accurately and rapidly geo-correct imagery in an automated way. The key difference with existing geo-correction approaches, which do not use a GPU, is the possibility to match large source image segments (8,192 by 8,192 pixels) with relatively large templates (512 by 512 pixels) significantly faster. Our approach is sufficiently robust to allow for the use of various reference data sources. The need for accelerated processing is relevant in our application context, which relates to mapping activities in the European Copernicus emergency management service. Our new method is demonstrated over an area northwest of Valencia (Spain) for a large forest fire event in July 2012. We use the Disaster Monitoring Constellation’s (DMC) DEIMOS-1 and RapidEye imagery for the delineation of burnt scar extent. Automated geo-correction of each full resolution image set takes approximately one minute. The reference templates are taken from the TerraColor data set and the Spanish national ortho-imagery database, through the use of dedicated web map services. Geo-correction results are compared to the vector sets derived in the Copernicus emergency service activation request.

Description: The mixed grassland in Canada is characterized by low to medium green vegetation cover, with a large amount of canopy background, such as non-photosynthetic vegetation residuals (litter), bare soil, and ground level biological crust. It is a challenge to extract the canopy information from satellite images because of the influence of canopy background. Therefore, this study aims to extract a soil line, a representation of bare soil with litter and soil crust in the surface, from Landsat images to reduce the background effect. Field work was conducted in the West Block of Grasslands National Park (GNP) in Canada, which represents the northern mixed grassland from late June to early July 2005. Six TM images with either no or only a small amount of cloud content were collected in 2005. In this study, soil lines were extracted directly from images by quantile regression and the (R, NIRmin) method. The results show that, (1) both cloud and cloud shadow have obvious influence on simulating soil line automatically from images; (2) green up and late senescence seasons are relatively better for soil line simulation; (3) the (R, NIRmin) method is better for soil line simulation than quantile regression to extract green biomass or green cover information.

Description: This paper describes the crossing of faults 44 and 49 when constructing the 57 km Gotthard base tunnel of the Alp Transit project. Fault 44 is a permeable fault that triggered significant surface deformations 1,400 m above the tunnel when it was reached by the advancing excavation. The fault runs parallel to the downstream face of the Nalps arch dam. Significant deformations were measured at the dam crown. Fault 49 is sub-vertical and permeable, and runs parallel at the upstream face of the dam. It was necessary to assess the risk when crossing fault 49, as a limit was put on the acceptable dam deformation for structural safety. The simulation model, forecasts and action decided when crossing over the faults are presented, with a brief description of the tunnel, the dam, and the monitoring system.

Description: The purpose of this review is to discuss the development and the state of the art in dynamic testing techniques and dynamic mechanical behaviour of rock materials. The review begins by briefly introducing the history of rock dynamics and explaining the significance of studying these issues. Loading techniques commonly used for both intermediate and high strain rate tests and measurement techniques for dynamic stress and deformation are critically assessed in Sects.  2 and 3 . In Sect.  4 , methods of dynamic testing and estimation to obtain stress–strain curves at high strain rate are summarized, followed by an in-depth description of various dynamic mechanical properties (e.g. uniaxial and triaxial compressive strength, tensile strength, shear strength and fracture toughness) and corresponding fracture behaviour. Some influencing rock structural features (i.e. microstructure, size and shape) and testing conditions (i.e. confining pressure, temperature and water saturation) are considered, ending with some popular semi-empirical rate-dependent equations for the enhancement of dynamic mechanical properties. Section  5 discusses physical mechanisms of strain rate effects. Section  6 describes phenomenological and mechanically based rate-dependent constitutive models established from the knowledge of the stress–strain behaviour and physical mechanisms. Section  7 presents dynamic fracture criteria for quasi-brittle materials. Finally, a brief summary and some aspects of prospective research are presented.

Description: Results of centrifuge testing of the interaction between pile modelsand a soil mass are cited. The results are analyzed and compared with computed bearing capacities of the piles and data derived from field tests.

Description: Optimum reservoir operation is a challenging problem in water resources systems. In this paper, Intelligent Water Drops (IWD) algorithm is applied in a reservoir operation problem. IWD is a population based algorithm and is initially proposed for solving combinatorial problems. The algorithm mimics the dynamics of river system and the behavior of water drops in the rivers. For this purpose data from Dez reservoir, located in southwestern Iran, has been used to examine the performance of the model. Moreover, due to similarities between IWD and the Ant Colony Optimization (ACO) algorithms, the results are compared with those of the ACO algorithm. Comparison of the results shows that while the IWD algorithm finds relatively better solutions, it is able to overcome the computational time consumption deficiencies inherited in the ACO methods. This is very important in large models with too many decision variables where run time becomes a limiting factor for optimization model applications.

Description: Understanding temporal variability in water quality in the Three Gorges Reservoir (TGR) is crucial for evaluating environmental effects of damming and protecting China’s largest freshwater resource. This study examined water quality changes in the main channel of the Yangtze River after dam completion as well as its relationship with water level fluctuation (WLF), controlled by annual impoundment operations and conditioned by flooding. Finally, the mass balance budget and integrative water quality indexing (WQI) methods were applied to elucidate the status of overall water quality since dam completion. Results showed that TGR outlet water (Yichang) exhibited higher pH and COD Mn values and lower concentrations of dissolved oxygen (DO) and ammonia nitrogen (NH 3 -N) than inlet water (Zhutuo). Temporal variations in water quality parameters displayed similar trends for the outlet and inlet. Water quality parameters all showed negative correlations to water level, revealing the different effects of damming on water quality. It was estimated that reservoir impoundment led to a DO depletion of 1495.5 (±1482.0) × 10 3 tons/yr and a COD Mn increase of 564.0 (±405.0) × 10 3 tons/yr, likely deriving from various internal pollutant loads from the WLF zone and tributary watersheds. According to WQI, TGR water quality remained at healthy levels. However, WQI linear regression showed that water quality at the outlet significantly decreased over time, indicating that the construction of the Three Gorges Dam generally caused water quality deterioration. Further investigation is required to determine the spatial distribution of point and non-point pollution sources and to identify major factors that influence TGR water quality.

Description: This paper focuses on the comparison of damage induced by smooth blasting and presplit blasting based on the excavation of high rock slope. The whole damage process of the smooth blasting and presplit blasting excavation method is studied by using a cumulative blasting damage numerical simulation technology based on the secondary development of the dynamic finite element code LS-DYNA. The results demonstrate that, in the case of contour blasting with the method of smooth blasting, the total damage of rock slope is a result of cumulated damage induced by the production hole, buffering hole, and smooth hole. Among the total damage, the blasting of the production hole is the main resource, followed by the smooth and buffering holes. For the presplit blasting, the final damage of rock slope is mainly induced by presplit blasting itself. The spatial distribution characteristics of the final damage zone of two methods are compared. Two classes of damage zone could be found in smooth blasting excavation; one of them is the columnar high-degree damage zone around the slope surface and the other is the low-degree damage zone located in the middle of the slope. But in the case of presplit blasting, there is only the columnar high-degree damage zone around the slope surface. Finally, a damage control suggestion for two blasting excavation methods is proposed and verified based on the excavation of the temporary shiplock slopes of the Three Gorges Project in China.

Description: The stress state of coal surrounding a coalbed methane (CBM) production well is affected by the bottom hole flowing pressure (BHFP). The permeability of coal shows a marked change under compression. The BHFP must be restricted to a specific range to favor higher permeability in the surrounding coal and thus higher productivity of the well. A new method to determine this specific range is proposed in this paper. Coal has a rather low tensile strength, which induces tensile failure and rock disintegration. The deformation of coal samples under compression has four main stages: compaction, elastic deformation, strain hardening, and strain softening. Permeability is optimal when the coal samples are in the strain softening stage. The three critical values of BHFP, namely, p wmin , p wmid , and p wupper , which correspond to the occurrence of tensile failure, the start of strain softening, and the beginning of plastic deformation, respectively, are derived from theoretical principles. The permeability of coal is in an optimal state when the BHFP is between p wmin and p wmid . The BHFP should be confined to this specific range for the efficient drainage of CBM wells. This method was applied to field operations in three wells in the Hancheng CBM field in China. A comprehensive analysis of drainage data and of the BHFP indicates that the new method is effective and offers significant improvement to current practices.

Description: Zimbabwe’s economy declined between 2000 and 2009. This study detects the economic decline in different regions of Zimbabwe using nighttime light imagery from the Defense Meteorological Satellite Program’s Operational Linescan System (DMSP-OLS). We found a good correlation (coefficient = 0.7361) between Zimbabwe’s total nighttime light (TNL) and Gross Domestic Product (GDP) for the period 1992 to 2009. Therefore, TNL was used as an indicator of regional economic conditions in Zimbabwe. Nighttime light imagery from 2000 and 2008 was compared at both national and regional scales for four types of regions. At the national scale, we found that nighttime light in more than half of the lit area decreased between 2000 and 2008. Moreover, within the four region types (inland mining towns, inland agricultural towns, border towns and cities) we determined that the mining and agricultural sectors experienced the most severe economic decline. Some of these findings were validated by economic survey data, proving that the nighttime light data is a potential data source for detecting the economic decline in Zimbabwe.

Description: High quality sedimentary measurements are required for studying fluvial geomorphology and hydrological processes e.g., flood and river dynamics. Mobile laser scanning (MLS) currently provides the opportunity to achieve high precision measurements of coarse fluvial sediments in a large survey area. Our study aims to investigate the capability of single-track MLS data for individual particle-based sediment modeling. Individual particles are firstly detected and delineated from a digital surface model (DSM) that is generated from the MLS data. 3D MLS points of each detected individual particle are then extracted from the point cloud. The grain size and the sphericity as well as the orientation of each individual particle are estimated based on the extracted MLS points. According to the evaluations conduced in the paper, it is possible to detect and to model sediment particles above 63 mm from a single-track MLS point cloud with a high reliability. The paper further discusses the strength and the challenges of individual particle-based approach for sedimentary measurement.

Description: Multispectral scanners (MSS) such as IKONOS have very high spatial resolution and therefore, provide excellent source of information about terrestrial features. The images from these scanners may contain shadows that can lead to partial or complete loss of radiometric information, leading to misinterpretation or inaccurate classification. In addition, the identification of shadows is critical for several applications. The goal of this study is to develop computer-based algorithms to detect shadows from IKONOS panchromatic (1 × 1 m) and MSS bands (4 × 4 m). We converted subsets of IKONOS pan and MSS images over New York City to HSV color space, and used histogram analysis to determine an intensity threshold. Potential sunlit and shadow areas were demarcated and edge detection techniques were employed to eliminate the non-shadow, low-intensity areas and identify shadow areas on the image subsets. We tested the results on a time series of datasets to develop a robust model that has the capability to detect shadows and extract them from high-resolution satellite imagery.

Description: A thorough review of available literature was conducted to inform of advancements in mobile LIDAR technology, techniques, and current and emerging applications in transportation. The literature review touches briefly on the basics of LIDAR technology followed by a more in depth description of current mobile LIDAR trends, including system components and software. An overview of existing quality control procedures used to verify the accuracy of the collected data is presented. A collection of case studies provides a clear description of the advantages of mobile LIDAR, including an increase in safety and efficiency. The final sections of the review identify current challenges the industry is facing, the guidelines that currently exist, and what else is needed to streamline the adoption of mobile LIDAR by transportation agencies. Unfortunately, many of these guidelines do not cover the specific challenges and concerns of mobile LIDAR use as many have been developed for airborne LIDAR acquisition and processing. From this review, there is a lot of discussion on “what” is being done in practice, but not a lot on “how” and “how well” it is being done. A willingness to share information going forward will be important for the successful use of mobile LIDAR.