ALBERT

Notizen: Abstract The effects of Tertiary Alpine metamorphism on pelitic Mesozoic cover rocks have been studied along a cross-section in the central Lepontine Alps in the Nufenen Pass area, Switzerland.Greenschist facies to amphibolite facies conditions are indicated by the formation of the index minerals chloritoid, garnet, staurolite and kyanite in pelitic rocks. Regional metamorphism reached maximum conditions during the interkinematic period between a main Alpine penetrative (D2) and a late Alpine (D3) crenulation type deformation phase or synchronous with the late Alpine deformation. Based on AFM phase relationships four different metamorphic zones can be distinguished: (1) chloritoid zone; (2) staurolite + chlorite zone; (3) staurolite + biotite zone; and, (4) kyanite zone.The isograds that separate these zones can be modelled by univariant reactions in the KFMASH system. The conditions of metamorphism calculated from geological ther-mobarometers for the maximum post-D2 por-phyroblast stage are from North to South: 500° C at 5-6 kbar and 600° C at 7-8 kbar.Detailed thermobarometry of garnet por-phyroblasts with complex textures suggests that maximum temperature was reached later than maximum pressure. Early garnet growth occurred along a prograde P-T-path, post-D2 rims grew with increasing temperature but decreasing pressure, and finally post-D3 garnet formed along a retrograde P-T-path.It may be concluded from the calculated pressure and temperature difference over a short distance (3 km) across the mapped area that the isogradic surfaces of the post-D2 metamorphism are steeply oriented. The data also suggest that isobaric and isothermal surfaces are parallel.Much of the observed metamorphic pattern can be explained as the result of a significant post-D2 differential uplift of the hot Pennine area relative to the Helvetic area along a tectonic contact zone. The closely spaced isograds (isotherms) in the North may then be interpreted as a thermal effect owing to the emplacement of the hot Pennine rocks against the Got-thard massif with its cover. Whereas, in the Pennine metasediments, post-D2 porphyroblast formation can be related to the decompression path which was steep enough for dehydration reactions to proceed. It is also remarkable that late kyanite porphyroblasts probably formed with decreasing pressure.The interpretation given here for the Nufenen Pass area may also apply to the Luk-manier Pass area where similar metamorphic patterns have been reported by Fox (1975). The formation of the ‘Northern Steep Belt’;, as denned by Milnes (1974b), and the associated late Alpine fold zones may, therefore, have significantly modified the metamorphic pattern of the Helvetic-Penninic contact zone.

Notizen: Abstract Porphyroblast textures in a Karakorum phyllite reveal that porphyroblast growth was syn-tectonic with respect to a cleavage forming deformation. During and after porphyroblast growth it partitions the deformation such that zones of intensified cleavage are developed which wrap around the porphyroblast whilst the porphyroblast and its strain shadow undergo little deformation. Porphyroblast strain shadows comprise quartz, calcite and felspar with little mica, and are probably formed by solution transfer during deformation. Unless the deformation is so strongly partitioned that no deformation of the porphyroblasts and their immediate surrounds occurs, inequidimensional porphyroblasts will rotate. Porphyroblasts undergo some dissolution after they have finished growing.

Notizen: Abstract New isotopic (Rb–Sr, U–Pb zircon and Sm–Nd) and petrological data are presented for part of an extensive Proterozoic mobile belt (locally known as the Rayner Complex) in East Antarctica. Much of the belt is the product of Mid-Proterozoic (∼ 1800–2000 Ma) juvenile crustal formation. Melting of this crust at about 1500 Ma ago produced the felsic magmas from which the dominant orthogneisses of this terrain were subsequently derived. Deformation and transitional granulite-amphibolite facies conditions (which peaked at 750 ± 50°C and 7–8 kbar (0.7–0.8 GPa) produced open to tight folding about E–W axes and syn-tectonic granitoids about 960 Ma ago. Subsequent felsic magmatism occurred at about 770 Ma and not, as has been widely advocated, at 500–550 Ma, which appears to have been a time of widespread upper greenschist facies (400–500°C) metamorphism, localized shearing and faulting.Sm-Nd model ages of 1.65–2.18 Ga disprove a previously favoured hypothesis that the Rayner Complex mostly represents reworked Archaean rocks from the neighbouring craton (Napier Complex). Models that involve rehydration of the Napier Complex are no longer required, since the Rayner Complex was its own source of water. Two episodes of Proterozoic crustal growth are identified, the later of which occurred between about 1200 Ma and 1000 Ma, and was relatively minor. Sedimentation took place only shortly before Late Proterozoic orogenesis.The multiphase history of the Rayner Complex has resulted in complex isotopic behaviour. Three temporally discrete episodes of Pb loss from zircon have been identified, the earliest two of which are responses to the c. 960 Ma and 540 Ma tectonothermal events. Fluid leaching was operative during the later event for there is a good correlation between degree of isotopic discordance and secondary mineral growth. Pb loss during the high-grade event was probably governed by the same process or by lattice annealing. Some zircon suites also document recent Pb loss. Most lower concordia intercepts have no direct geological meaning and are explicable as mixed ages produced by incomplete Pb loss during two or more secondary events. Whereas all zircon separates from the orthogneisses produce U–Pb isotopic alignments, zircons from the only analysed paragneiss produce scattered data, in part reflecting a range of provenance. The 960 Ma event was also associated with the growth of a characteristically low U zircon (∼ 300 μg/g) in rocks of inferred high Zr content.There is ubiquitous evidence for the resetting of Rb–Sr total-rock isochrons. Even samples separated by up to 10 km fail to produce igneous crystallization ages. Minor mineralogical changes produced by the 540 Ma upper greenschist-facies metamorphism were sufficient to almost completely reset some Rb–Sr isochrons and to produce open system conditions on outcrop scale, at least in one location.

Notizen: Abstract The preserved array of pressures in the eastern Dalradian indicates that considerable syn- to post-metamorphic differential uplift has occurred. This inferred differential uplift suggests that Buchan sillimanite zone rocks originally lay at higher structural levels than presently adjacent cooler kyanite zone rocks to the west. A number of features are believed to coincide with the western margin of the sillimanite zone. These are a maximum in temperature, sharp thermal features, a high strain zone, and a train of metabasites. These features are explained by invoking syn-metamorphic movement between the Buchan sillimanite zone and the kyanite zone to its west, involving some horizontal component of movement. It is suggested that the lateral, now eroded, equivalents of the Buchan area once provided part of the required tectonic thickening for other parts of the Dalradian. Areas surrounding the Buchan area suffered tectonic burial followed by metamorphism during uplift relative to the Buchan area.

Notizen: Abstract The upper Jurassic Nikoro greenstone complex of eastern Hokkaido suffered high-pressure intermediate type metamorphism. Characteristic minerals include lawsonite, aragonite, sodic pyroxene of the aegirinejadeite series, winchite. sodic amphibole of the glaucophane-riebeckite series, pumpellyite, epidote and actinolite.High-pressure metamorphism of the Nikoro greenstone complex is related to subduction of the Kula plate toward the Palaeo-Okhotsk Land during Cretaceous time.

Notizen: Abstract The Berzosa fault is a major ductile shear zone, the Berzosa Shear Zone (BSZ), which separates the ‘Ollo de Sapo’anticline from the inner higher-grade crystalline axis of the Iberian Hercynian Belt. This shear zone is the site of abundant early kinematic quartz (± Al-silicates) segregations, rich in fluid inclusions. Host rocks are medium-grade staurolite schists and sillimanite gneisses.Fluid inclusions in selected quartz segregations across the Berzosa shear zone have been studied by microthermometric methods as well as, in some instances, by Raman analysis. The recorded fluid inclusion history begins at the end of an intense secondary recrystallization period during late-peak metamorphic conditions and lasts until late in the uplift history of the zone.Three types of inclusions have been found, which in a time sequence are: CO2± H2O; H2O+salt (B-type); and, N2+CH4. Three types of B inclusion may be distinguished in turn, depending on whether they were trapped during an earlier dynamic-recovery phase (B1-type), formed later as intergranular trails (B2-type), or were trapped apparently along with N2+CH4 in clusions from a heterogeneous fluid (B3-type).Considerations from isochores confirm that CO2± H2O inclusions were trapped during late-peak and high-T retrograde metamorphic conditions (in the range 650–500°C and 5–2 kbar), whilst N2+CH4 inclusions, along with the B3-type of inclusions, formed at low-pressures (〈1 kbar) and temperatures (± 300°C). B2-type inclusions were trapped chronologically between these two in a period in which strong inverse lateral thermal gradients developed in the zone. Inferred P-T paths for the area are convex to the T-axis.

Notizen: Abstract The orthopyroxene-clinopyroxene, garnet-orthopyroxene and garnet-clinopyroxene geothermometers, and the garnet-orthopyroxene-plagioclase, garnet-clinopyroxene-plagioclase and anorthite-ferrosilite-grossular-almandine-quartz geobarometers are applied to metabasites and the garnetplagioclase-sillimanite-quartz geobarometer is applied to a metapelite from the Proterozoic Arendal granulite terrain, Bamble sector, Norway. P–T conditions of metamorphism were 7.3 ± 0.5 kbar and 800 ± 60°C.This terrain shows a regional gradation from the amphibolite facies, into normal LILE content granulite facies rocks and finally strongly LILE deficient granulite facies gneisses. Neither P nor T vary significantly across the entire transition zone. The change in ‘grade’parallels the increasing dominance of CO2 over H2O in the fluid phase.LILE-depletion is not a pre-condition of granulite facies metamorphism: granulites may have either ‘depleted’or ‘normal’chemistries. The results presented herein show that LILE-deficiency in granulite facies orthogneisses is not necessarily related to variations in either P or T. The important mechanisms in the Arendal terrain were (a) direct synmetamorphic crystallization from magma, with primary LILE-poor mineralogies imposed by the prevailing fluid regime, and (b) metamorphic depletion, involving scavenging of LILEs during flushing by mantle-derived CO2-rich fluids. The latter process is constrained by U–Pb and Rb–Sr isotopic work to have occurred no later than 50 Ma after intrusion of the acid-intermediate gneisses, and was probably associated with contemporary basic magmatism in a tectonic environment similar to a present day cordilleran continental margin.

Notizen: Abstract Peridotite and infolded marble of the Seiad ultramafic complex were recrystallized in the upper amphibolite facies as part of the regional progressive metamorphism of the Rattlesnake Creek terrane. Field relations, including the occurrence of metarodingites, and metasomatic zones between dissimilar rock types, demonstrate that the metasediments and serpentinized ultramafic rocks were juxtaposed prior to regional, barrovian metamorphism. Temperatures are estimated to have reached 760–800°C at pressures of 7–8 kbar during the peak of metamorphism. Four low-variance parageneses have been identified within a small (3 km2) area of the complex, which may reasonably be assumed to have formed under the same P and T conditions. Isobaric T-Xco2 diagrams of appropriate equilibria are presented for three different internally consistent sets of thermodynamic data. Despite the seemingly small numerical differences between the standard state thermodynamic properties of the data sets, only one diagram allows the four observed assemblages to coexist within a reasonable temperature range. All three phase diagrams require differences in fluid composition on the scale of a thin section; strong evidence for effective control of pore fluid composition by local mineral reactions during metamorphism.