ALBERT

Beschreibung: More pronounced aging effects, more frequent early-life failures, and incomplete testing and verification processes due to time-to-market pressure in new fabrication technologies impose reliability challenges on forthcoming systems. A promising solution to these reliability challenges is self-test and self-reconfiguration with no or limited external control. In this work a scalable self-test mechanism for periodic online testing of many-core processor has been proposed. This test mechanism facilitates autonomous detection and omission of faulty cores and makes graceful degradation of the many-core architecture possible. Several test components are incorporated in the many-core architecture that distribute test stimuli, suspend normal operation of individual processing cores, apply test, and detect faulty cores. Test is performed concurrently with the system normal operation without any noticeable downtime at the application level. Experimental results show that the proposed test architecture is extensively scalable in terms of hardware overhead and performance overhead that makes it applicable to many-cores with more than a thousand processing cores.

Beschreibung: The fingerprint identification is an efficient biometric technique to authenticate human beings in real-time Big Data Analytics. In this paper, we propose an efficient Finite State Machine (FSM) based reconfigurable architecture for fingerprint recognition. The fingerprint image is resized, and Compound Linear Binary Pattern (CLBP) is applied on fingerprint, followed by histogram to obtain histogram CLBP features. Discrete Wavelet Transform (DWT) Level 2 features are obtained by the same methodology. The novel matching score of CLBP is computed using histogram CLBP features of test image and fingerprint images in the database. Similarly, the DWT matching score is computed using DWT features of test image and fingerprint images in the database. Further, the matching scores of CLBP and DWT are fused with arithmetic equation using improvement factor. The performance parameters such as TSR (Total Success Rate), FAR (False Acceptance Rate), and FRR (False Rejection Rate) are computed using fusion scores with correlation matching technique for FVC2004 DB3 Database. The proposed fusion based VLSI architecture is synthesized on Virtex xc5vlx30T-3 FPGA board using Finite State Machine resulting in optimized parameters.

Beschreibung: With the increase in soft failures in deep submicron ICs, online testing is becoming an integral part of design for testability. Some techniques for online testing of asynchronous circuits are proposed in the literature, which involves development of a checker that verifies the correctness of the protocol. This checker involves Mutex blocks making its area overhead quite high. In this paper, we have adapted the Theory of Fault Detection and Diagnosis available in the literature on Discrete Event Systems to online testing of speed independent asynchronous circuits. The scheme involves development of a state based model of the circuit, under normal and various stuck-at fault conditions, and finally designing state estimators termed as detectors. The detectors monitor the circuit online and determine whether it is functioning in normal/failure mode. The main advantages are nonintrusiveness and low area overheads compared to similar schemes reported in the literature.

Beschreibung: The growing complexity and higher time-to-market pressure make the functional verification of modern large scale hardware systems more challenging. These challenges bring the requirement of a high quality testbench that is capable of thoroughly verifying the design. To reveal a bug, the testbench needs to activate it by stimulus, propagate the erroneous behaviors to some checked points, and detect it at these checked points by checkers. However, current dominant verification approaches focus only on the activation aspect using a coverage model which is not qualified and ignore the propagation and detection aspects. Using a new metric, this paper qualifies the testbench by mutation analysis technique with the consideration of the quality of the stimulus, the coverage model, and the checkers. Then the testbench is iteratively refined according to the qualification feedback. We have conducted experiments on two designs of different scales to demonstrate the effectiveness of the proposed method in improving the quality of the testbench.

Beschreibung: A readout integrated circuit (ROIC) is a crucial part that determines the quality of imaging. In order to analyze the noise of a ROIC with distinct illustration of each noise source transferring, a modularized noise analysis method is proposed whose application is applied for a ROIC cell, where all the MOSFETs are optimized in subthreshold region, leading to the power dissipation 2.8 μW. The modularized noise analysis begins with the noise model built using transfer functions and afterwards presents the transfer process of noise in the form of matrix, through which we can describe the contribution of each noise source to the whole output noise clearly, besides optimizing the values of key components. The optimal noise performance is obtained under the limitation of layout area less than 30 μm × 30 μm, resulting in that the integration capacitor should be selected as 0.74 pF to achieve an optimal noise performance, the whole output noise reaching the minimum value at 74.1 μV. In the end transient simulations utilizing Verilog-A are carried out for comparisons. The results showing good agreement verify the feasibility of the method presented through matrix.

Beschreibung: With continued process scaling, CMOS has become a viable technology for the design of high-performance low noise amplifiers (LNAs) in the radio frequency (RF) regime. This paper describes the design of RF LNAs using a geometric programming (GP) optimization method. An important challenge for RF LNAs designed at nanometer scale geometries is the excess thermal noise observed in the MOSFETs. An extensive survey of analytical models and experimental results reported in the literature is carried out to quantify the issue of excessive thermal noise for short-channel MOSFETs. Short channel effects such as channel-length modulation and velocity saturation effects are also accounted for in our optimization process. The GP approach is able to efficiently calculate the globally optimum solution. The approximations required to setup the equations and constraints to allow convex optimization are detailed. The method is applied to the design of inductive source degenerated common source amplifiers at the 90 nm and 180 nm technology nodes. The optimization results are validated through comparison with numerical simulations using Agilent’s Advanced Design Systems (ADS) software.

Beschreibung: Low-power analog-to-digital converter (ADC) is a crucial part of wearable or implantable bioelectronics. In order to reduce the power of successive-approximation-register (SAR) ADC, an improved energy-efficient capacitor switching scheme of SAR ADC is proposed for implantable bioelectronic applications. With sequence initialization, novel logic control, and capacitive subconversion, 97.6% switching energy is reduced compared to the traditional structure. Moreover, thanks to the top-plate sampling and capacitive subconversion, 87% input-capacitance reduction can be achieved over the conventional structure. A 10-bit SAR ADC with this proposed switching scheme is realized in 65 nm CMOS. With 1.514 KHz differential sinusoidal input signals sampled at 50 KS/s, the ADC achieves an SNDR of 61.4 dB and only consumes power of 450 nW. The area of this SAR ADC IP core is only 136 μm × 176 μm, making it also area-efficient and very suitable for biomedical electronics application.

Beschreibung: The gate level body biasing (GLBB) is assessed in the context of ultra-low-voltage logic designs. To this purpose, a GLBB mirror full adder is implemented by using a commercial 45 nm bulk CMOS triple-well technology and compared to equivalent conventional zero body-biased CMOS and dynamic threshold voltage MOSFET (DTMOS) circuits under different running conditions. Postlayout simulations demonstrate that, at the parity of leakage power consumption, the GLBB technique exhibits a significant concurrent reduction of the energy per operation and the delay in comparison to the conventional CMOS and DTMOS approaches. The silicon area required by the GLBB full adder is halved with respect to the equivalent DTMOS implementation, but it is higher in comparison to conventional CMOS design. Performed analysis also proves that the GLBB solution exhibits a high level of robustness against temperature fluctuations and process variations.

Beschreibung: Addition usually affects the overall performance of digital systems and an arithmetic function. Adders are most widely used in applications like multipliers, DSP (i.e., FFT, FIR, and IIR). In digital adders, the speed of addition is constrained by the time required to propagate a carry through the adder. Various techniques have been proposed to design fast adders. We have derived architectures for carry-select adder (CSA), Common Boolean Logic (CBL) based adders, ripple carry adder (RCA), and Carry Look-Ahead Adder (CLA) for 8-, 16-, 32-, and 64-bit length. In this work we have done comparative analysis of different types of adders in Synopsis Design Compiler using different standard cell libraries at 32/28 nm. Also, the designs are analyzed for the stuck at faults (s-a-0, s-a-1) using Synopsis TetraMAX.

Beschreibung: A wide tuning band pass filter (BPF) with steep roll-off high rejection and low noise figure is presented. The design feature of steep roll-off high stopband rejection (〉20 dB) and low noise figure (

Beschreibung: Ultrasound imaging is one of the available imaging techniques used for diagnosis of kidney abnormalities, which may be like change in shape and position and swelling of limb; there are also other Kidney abnormalities such as formation of stones, cysts, blockage of urine, congenital anomalies, and cancerous cells. During surgical processes it is vital to recognize the true and precise location of kidney stone. The detection of kidney stones using ultrasound imaging is a highly challenging task as they are of low contrast and contain speckle noise. This challenge is overcome by employing suitable image processing techniques. The ultrasound image is first preprocessed to get rid of speckle noise using the image restoration process. The restored image is smoothened using Gabor filter and the subsequent image is enhanced by histogram equalization. The preprocessed image is achieved with level set segmentation to detect the stone region. Segmentation process is employed twice for getting better results; first to segment kidney portion and then to segment the stone portion, respectively. In this work, the level set segmentation uses two terms, namely, momentum and resilient propagation () to detect the stone portion. After segmentation, the extracted region of the kidney stone is given to Symlets, Biorthogonal (bio3.7, bio3.9, and bio4.4), and Daubechies lifting scheme wavelet subbands to extract energy levels. These energy levels provide evidence about presence of stone, by comparing them with that of the normal energy levels. They are trained by multilayer perceptron (MLP) and back propagation (BP) ANN to classify and its type of stone with an accuracy of 98.8%. The prosed work is designed and real time is implemented on both Filed Programmable Gate Array Vertex-2Pro FPGA using Xilinx System Generator (XSG) Verilog and Matlab 2012a.

Beschreibung: Being an essential part of infrared readout integrated circuit, correlated double sampling (CDS) circuits play important roles in both depressing reset noise and conditioning integration signals. To adapt applications for focal planes of large format and high density, a new structure of CDS circuit occupying small layout area is proposed, whose power dissipation has been optimized by using MOSFETs in operation of subthreshold region, which leads to 720 nW. Then the noise calculation model is established, based on which the noise analysis has been carried out by the approaches of transfer function and numerical simulations using SIMULINK and Verilog-A. The results are in good agreement, demonstrating the validity of the present noise calculation model. Thermal noise plays a dominant role in the long wave situation while noise is the majority in the medium wave situation. The total noise of long wave is smaller than medium wave, both of which increase with the integration capacitor and integration time increasing.

Beschreibung: Test power has been turned to a bottleneck for test considerations as the excessive power dissipation has serious negative effects on chip reliability. In scan-based designs, rippling transitions caused by test patterns shifting along the scan chain not only elevate power consumption but also introduce spurious switching activities in the combinational logic. In this paper, we propose a novel area-efficient gating scan architecture that offers an integrated solution for reducing total average power in both scan cells and combinational part during shift mode. In the proposed gating scan structure, conventional master/slave scan flip-flop has been modified into a new gating scan cell augmented with state preserving and gating logic that enables average power reduction in combinational logic during shift mode. The new gating scan cells also mitigate the number of transitions during shift and capture cycles. Thus, it contributes to average power reduction inside the scan cell during scan shifting with low impact on peak power during capture cycle. Simulation results have shown that the proposed gating scan cell saves 28.17% total average power compared to conventional scan cell that has no gating logic and up to 44.79% compared to one of the most common existing gating architectures.

Beschreibung: Nowadays, many new low power ASICs applications have emerged. This new market trend made the designer’s task of meeting the timing and routability requirements within the power budget more challenging. One of the major sources of power consumption in modern integrated circuits (ICs) is the Interconnect. In this paper, we present a novel Power and Timing-Driven global Placement (PTDP) algorithm. Its principle is to wrap a commercial timing-driven placer with a nets weighting mechanism to calculate the nets weights based on their timing and power consumption. The new calculated weight is used to drive the placement engine to place the cells connected by the critical power or timing nets close to each other and hence reduce the parasitic capacitances of the interconnects and, by consequence, improve the timing and power consumption of the design. This approach not only improves the design power consumption but facilitates also the routability with only a minor impact on the timing closure of a few designs. The experiments carried on 40 industrial designs of different nodes, sizes, and complexities and demonstrate that the proposed algorithm is able to achieve significant improvements on Quality of Results (QoR) compared with a commercial timing driven placement flow. We effectively reduce the interconnect power by an average of 11.5% that leads to a total power improvement of 5.4%, a timing improvement of 9.4%, 13.7%, and of 3.2% in Worst Negative Slack (WNS), Total Negative Slack (TNS), and total wirelength reduction, respectively.

Beschreibung: Due to demand of information transfer through higher speed wireless communication network, it is time to think about security of important information to be transferred. Further, as these communication networks are part of open channel, to preserve the security of any Critical Information (CI) is really a challenging task in any real-time application. Data hiding techniques give more security and robustness of important CI against encryption or cryptographic software solutions. However, hardwired approach exhibits better solution not only in terms of reduction of complexity but also in terms of adaptive real-time output. This paper demonstrates frequency, Discrete Cosine Transform (DCT) domain Steganographic data hiding hardware solution for secret communication called Crypto-Stego-Real-Time (CSRT) System. The challenge is to design a secure algorithm keeping reliability of minimum distortion of original cover signal while embedding considerable amount of CI. Field Programmable Gate Array (FPGA) implementation shown in this paper is more secure, robust, and fast. Pipelining process while embedding enhances the speed of embedding, optimizes the memory utilization, and gives better Peak Signal to Noise Ratio (PSNR) and high robustness. Practically implemented hardware Steganographic solutions shown in this paper also give better performance than that of the current state-of-the-art hardware implementations.

Beschreibung: Recently, we present a novel Mastrovito form of nonrecursive Karatsuba multiplier for all trinomials. Specifically, we found that related Mastrovito matrix is very simple for equally spaced trinomial (EST) combined with classic Karatsuba algorithm (KA), which leads to a highly efficient Karatsuba multiplier. In this paper, we consider a new special class of irreducible trinomial, namely, . Based on a three-term KA and shifted polynomial basis (SPB), a novel bit-parallel multiplier is derived with better space and time complexity. As a main contribution, the proposed multiplier costs about circuit gates of the fastest multipliers, while its time delay matches our former result. To the best of our knowledge, this is the first time that the space complexity bound is reached without increasing the gate delay.

Beschreibung: The physical constraints of ever-shrinking CMOS transistors are rapidly approaching atomistic and quantum mechanical limits. Therefore, research is now directed towards the development of nanoscale devices that could work efficiently in the sub-10 nm regime. This coupled with the fact that recent design trend for analog signal processing applications is moving towards current-mode circuits which offer lower voltage swings, higher bandwidth, and better signal linearity is the motivation for this work. A digitally controlled DVCC has been realized using CNFETs. This work exploited the CNFET’s parameters like chirality, pitch, and numbers of CNTs to perform the digital control operation. The circuit has minimum number of transistors and can control the output current digitally. A similar CMOS circuit with 32 nm CMOS parameters was also simulated and compared. The result shows that CMOS-based circuit requires 418.6 μW while CNFET-based circuit consumes 352.1 μW only. Further, the proposed circuit is used to realize a CNFET-based instrumentation amplifier with digitally programmable gain. The amplifier has a CMRR of 100 dB and ICMR equal to 0.806 V. The 3 dB bandwidth of the amplifier is 11.78 GHz which is suitable for the applications like navigation, radar instrumentation, and high-frequency signal amplification and conditioning.

Beschreibung: 3D integration can greatly benefit future many-cores by enabling low-latency three-dimensional Network-on-Chip (3D-NoC) topologies. However, due to high cost, low yield, and frequent failures of Through-Silicon Via (TSV), 3D-NoCs are most likely to include only a few vertical connections, resulting in incomplete topologies that pose new challenges in terms of deadlock-free routing and TSV assignment. The routers of such networks require a way to locate the nodes that have vertical connections, commonly known as elevators, and select one of them in order to be able to reach other layers when necessary. In this paper, several alternative TSV selection strategies requiring a constant amount of configurable bits per router are introduced. Each proposed solution consists of a configuration algorithm, which provides each router with the necessary information to locate the elevators, and a routing algorithm, which uses this information at runtime to route packets to an elevator. Our algorithms are compared by simulation to highlight the advantages and disadvantages of each solution under various scenarios, and hardware synthesis results demonstrate the scalability of the proposed approach and its suitability for cost-oriented designs.

Beschreibung: This paper proposes a novel bus encoding method on MBUS in order to reduce the power consumption of system-on-chips (SoCs). The main contribution is to lower the bus activity by an average 64.55% and thus decrease the IO power consumption through reconfiguring the MBUS transmission. This method is effective because field-programmable gate array (FPGA) IOs are most likely to have very large capacitance associated with them and consequently dissipate a lot of dynamic power. Experimental result shows an average 70.96% total power reduction compared with the original MBUS implementation.

Beschreibung: Synthesis of reversible sequential circuits is a very new research area. It has been shown that such circuits can be implemented using quantum dot cellular automata. Other work has used traditional designs for sequential circuits and replaced the flip-flops and the gates with their reversible counterparts. Our earlier work uses a direct feedback method without any flip-flops, improving upon the replacement technique in both quantum cost and ancilla inputs. We present here a further improved version of the direct feedback method. Design examples show that the proposed method produces better results than our earlier method in terms of both quantum cost and ancilla inputs. We also propose the first technique for online testing of single line faults in sequential reversible circuits.

Beschreibung: This work reports an effective design of cache system for Chip Multiprocessors (CMPs). It introduces built-in logic for verification of cache coherence in CMPs realizing directory based protocol. It is developed around the cellular automata (CA) machine, invented by John von Neumann in the 1950s. A special class of CA referred to as single length cycle 2-attractor cellular automata (TACA) has been planted to detect the inconsistencies in cache line states of processors’ private caches. The TACA module captures coherence status of the CMPs’ cache system and memorizes any inconsistent recording of the cache line states during the processors’ reference to a memory block. Theory has been developed to empower a TACA to analyse the cache state updates and then to settle to an attractor state indicating quick decision on a faulty recording of cache line status. The introduction of segmentation of the CMPs’ processor pool ensures a better efficiency, in determining the inconsistencies, by reducing the number of computation steps in the verification logic. The hardware requirement for the verification logic points to the fact that the overhead of proposed coherence verification module is much lesser than that of the conventional verification units and is insignificant with respect to the cost involved in CMPs’ cache system.

Beschreibung: This paper presents a new proposal for three-input logic function implementation in MOS current mode logic (MCML) style. The conventional realization of such logic employs three levels of stacked source-coupled transistor pairs. It puts restriction on minimum power supply requirement and results in increased static power. The new proposal presents a circuit element named as quad-tail cell which reduces number of stacked source-coupled transistor levels by two. A three-input exclusive-OR (XOR) gate, a vital element in digital system design, is chosen to elaborate the approach. Its behavior is analyzed and SPICE simulations using TSMC 180 nm CMOS technology parameters are included to support the theoretical concept. The performance of the proposed circuit is compared with its counterparts based on CMOS complementary pass transistor logic, conventional MCML, and cascading of existing two input tripple-tail XOR cells and applying triple-tail concept in conventional MCML topology. It is found that the proposed XOR gate performs best in terms of most of the performance parameters. The sensitivity of the proposed XOR gate towards process variation shows a variation of 1.54 between the best and worst case. As an extension, a realization of 4 : 1 multiplexer has also been included.

Beschreibung: A low complexity all-digital background calibration technique based on statistics is proposed. The basic idea of the statistics calibration technique is that the output average energy of each channel of TIADC will be consistent ideally, since each channel samples the same input signal, and therefore the energy deviation directly reflects the mismatch errors of channels. In this work, the offset mismatch and gain mismatch are calibrated by an adaptive statistics calibration algorithm based on LMS iteration; the timing mismatch is estimated by performing the correlation calculation of the outputs of subchannels and corrected by an improved fractional delay filter based on Farrow structure. Applied to a four-channel 12-bit 400 MHz TIADC, simulation results show that, with calibration, the SNDR raises from 22.5 dB to 71.8 dB and ENOB rises from 3.4 bits to 11.6 bits for a 164.6 MHz sinusoidal input. Compared with traditional methods, the proposed schemes are more feasible to implement and consume less hardware resources.

Beschreibung: Low-power analog-to-digital converter (ADC) is a crucial part of wearable or implantable bioelectronics. In order to reduce the power of successive-approximation-register (SAR) ADC, an improved energy-efficient capacitor switching scheme of SAR ADC is proposed for implantable bioelectronic applications. With sequence initialization, novel logic control, and capacitive subconversion, 97.6% switching energy is reduced compared to the traditional structure. Moreover, thanks to the top-plate sampling and capacitive subconversion, 87% input-capacitance reduction can be achieved over the conventional structure. A 10-bit SAR ADC with this proposed switching scheme is realized in 65 nm CMOS. With 1.514 KHz differential sinusoidal input signals sampled at 50 KS/s, the ADC achieves an SNDR of 61.4 dB and only consumes power of 450 nW. The area of this SAR ADC IP core is only 136 μm × 176 μm, making it also area-efficient and very suitable for biomedical electronics application.

Beschreibung: The fingerprint identification is an efficient biometric technique to authenticate human beings in real-time Big Data Analytics. In this paper, we propose an efficient Finite State Machine (FSM) based reconfigurable architecture for fingerprint recognition. The fingerprint image is resized, and Compound Linear Binary Pattern (CLBP) is applied on fingerprint, followed by histogram to obtain histogram CLBP features. Discrete Wavelet Transform (DWT) Level 2 features are obtained by the same methodology. The novel matching score of CLBP is computed using histogram CLBP features of test image and fingerprint images in the database. Similarly, the DWT matching score is computed using DWT features of test image and fingerprint images in the database. Further, the matching scores of CLBP and DWT are fused with arithmetic equation using improvement factor. The performance parameters such as TSR (Total Success Rate), FAR (False Acceptance Rate), and FRR (False Rejection Rate) are computed using fusion scores with correlation matching technique for FVC2004 DB3 Database. The proposed fusion based VLSI architecture is synthesized on Virtex xc5vlx30T-3 FPGA board using Finite State Machine resulting in optimized parameters.

Beschreibung: More pronounced aging effects, more frequent early-life failures, and incomplete testing and verification processes due to time-to-market pressure in new fabrication technologies impose reliability challenges on forthcoming systems. A promising solution to these reliability challenges is self-test and self-reconfiguration with no or limited external control. In this work a scalable self-test mechanism for periodic online testing of many-core processor has been proposed. This test mechanism facilitates autonomous detection and omission of faulty cores and makes graceful degradation of the many-core architecture possible. Several test components are incorporated in the many-core architecture that distribute test stimuli, suspend normal operation of individual processing cores, apply test, and detect faulty cores. Test is performed concurrently with the system normal operation without any noticeable downtime at the application level. Experimental results show that the proposed test architecture is extensively scalable in terms of hardware overhead and performance overhead that makes it applicable to many-cores with more than a thousand processing cores.

Beschreibung: Addition usually affects the overall performance of digital systems and an arithmetic function. Adders are most widely used in applications like multipliers, DSP (i.e., FFT, FIR, and IIR). In digital adders, the speed of addition is constrained by the time required to propagate a carry through the adder. Various techniques have been proposed to design fast adders. We have derived architectures for carry-select adder (CSA), Common Boolean Logic (CBL) based adders, ripple carry adder (RCA), and Carry Look-Ahead Adder (CLA) for 8-, 16-, 32-, and 64-bit length. In this work we have done comparative analysis of different types of adders in Synopsis Design Compiler using different standard cell libraries at 32/28 nm. Also, the designs are analyzed for the stuck at faults (s-a-0, s-a-1) using Synopsis TetraMAX.

Beschreibung: UM-BUS is a novel dynamically reconfigurable high-speed serial bus for embedded systems. It can achieve fault tolerance by detecting the channel status in real time and reconfigure dynamically at run-time. The bus supports direct interconnections between up to eight master nodes and multiple slave nodes. In order to solve the time synchronization problem among master nodes, this paper proposes a novel time synchronization method, which can meet the requirement of time precision in UM-BUS. In this proposed method, time is firstly broadcasted through time broadcast packets. Then, the transmission delay and time deviations via three handshakes during link self-checking and channel detection can be worked out referring to the IEEE 1588 protocol. Thereby, each node calibrates its own time according to the broadcasted time. The proposed method has been proved to meet the requirement of real-time time synchronization. The experimental results show that the synchronous precision can achieve a bias less than 20 ns.

Beschreibung: Ultrasound imaging is one of the available imaging techniques used for diagnosis of kidney abnormalities, which may be like change in shape and position and swelling of limb; there are also other Kidney abnormalities such as formation of stones, cysts, blockage of urine, congenital anomalies, and cancerous cells. During surgical processes it is vital to recognize the true and precise location of kidney stone. The detection of kidney stones using ultrasound imaging is a highly challenging task as they are of low contrast and contain speckle noise. This challenge is overcome by employing suitable image processing techniques. The ultrasound image is first preprocessed to get rid of speckle noise using the image restoration process. The restored image is smoothened using Gabor filter and the subsequent image is enhanced by histogram equalization. The preprocessed image is achieved with level set segmentation to detect the stone region. Segmentation process is employed twice for getting better results; first to segment kidney portion and then to segment the stone portion, respectively. In this work, the level set segmentation uses two terms, namely, momentum and resilient propagation () to detect the stone portion. After segmentation, the extracted region of the kidney stone is given to Symlets, Biorthogonal (bio3.7, bio3.9, and bio4.4), and Daubechies lifting scheme wavelet subbands to extract energy levels. These energy levels provide evidence about presence of stone, by comparing them with that of the normal energy levels. They are trained by multilayer perceptron (MLP) and back propagation (BP) ANN to classify and its type of stone with an accuracy of 98.8%. The prosed work is designed and real time is implemented on both Filed Programmable Gate Array Vertex-2Pro FPGA using Xilinx System Generator (XSG) Verilog and Matlab 2012a.

Beschreibung: Wireless capsule endoscopy (WCE) is a painless diagnostic tool used by the physicians for endoscopic examination of the gastrointestinal track. The performance of the existing WCE systems is limited by high power consumption and low data rate transmission. In this paper, a 144 MHz FinFET On-Off Keying (OOK) transmitter is designed and integrated with a class-E power amplifier. It is implemented and simulated using 16 nm FinFET Predictive Technology Models. The proposed transmitter can achieve the data rate of 33 Mbps with average power consumption of 1.04 mW from a 0.85 V power supply in the simulation. This design outperforms the current state-of-the-art designs.

Beschreibung: Timing optimization for logic circuits is one of the key steps in logic synthesis. Extant research data are mainly proposed based on various intelligence algorithms. Hence, they are neither comparable with timing optimization data collected by the mainstream electronic design automation (EDA) tool nor able to verify the superiority of intelligence algorithms to the EDA tool in terms of optimization ability. To address these shortcomings, a novel verification method is proposed in this study. First, a discrete particle swarm optimization (DPSO) algorithm was applied to optimize the timing of the mixed polarity Reed-Muller (MPRM) logic circuit. Second, the Design Compiler (DC) algorithm was used to optimize the timing of the same MPRM logic circuit through special settings and constraints. Finally, the timing optimization results of the two algorithms were compared based on MCNC benchmark circuits. The timing optimization results obtained using DPSO are compared with those obtained from DC, and DPSO demonstrates an average reduction of 9.7% in the timing delays of critical paths for a number of MCNC benchmark circuits. The proposed verification method directly ascertains whether the intelligence algorithm has a better timing optimization ability than DC.

Beschreibung: A classic second-order coupled-capacitor Chebyshev bandpass filter using resonator of tunable active capacitor and inductor is presented. The low cost and small size of CMOS active components make the bandpass filter (BPF) attractive in fully integrated CMOS applications. The tunable active capacitor is designed to compensate active inductor’s resistance for resistive match in the resonator. In many design cases, more than 95% resistive loss is cancelled. Meanwhile, adjusting design parameter of the active component provides BPF tunability in center frequency, pass band, and pass band gain. Designed in 1.8 V 180 nanometer CMOS process, the BPF has a tuning frequency range of 758–864 MHz, a controllable pass band of 7.1–65.9 MHz, a quality factor of 12–107, a pass band gain of 6.5–18.1 dB, and a stopband rejection of 38–50 dB.

Beschreibung: Multilevel Cell Spin-Transfer Torque Random Access Memory (MLC STT-RAM) is a promising nonvolatile memory technology to build registers for its natural immunity to electromagnetic radiation in rad-hard space environment. Unlike traditional SRAM-based registers, MLC STT-RAM exhibits unbalanced write state transitions due to the fact that the magnetization directions of hard and soft domains cannot be flipped independently. This feature leads to nonuniform costs of write states in terms of latency and energy. However, current SRAM-targeting register allocations do not have a clear understanding of the impact of the different write state-transition costs. As a result, those approaches heuristically select variables to be spilled without considering the spilling priority imposed by MLC STT-RAM. Aiming to address this limitation, this paper proposes a state-transition-aware spilling cost minimization (SSCM) policy, to save power when MLC STT-RAM is employed in register design. Specifically, the spilling cost model is first constructed according to the linear combination of different state-transition frequencies. Directed by the proposed cost model, the compiler picks up spilling candidates to achieve lower power and higher performance. Experimental results show that the proposed SSCM technique can save energy by 19.4% and improve the lifetime by 23.2% of MLC STT-RAM-based register design.

Beschreibung: Oscillation-based testing (OBT) has been proven to be a simple, yet effective VLSI test for numerous circuit types. This paper investigates, for the first time, the application of OBT verification for second generation current conveyors (CCIIs). The OBT is formed by connecting the CCII into a simple Wien bridge oscillator and monitoring both the amplitude and frequency of oscillation. The fault detection rate, taking into account both the open and short circuit fault simulation analyses, indicates 96.34% fault coverage using a combination of amplitude and frequency output sensing in all technology corners. The only nondetected faults are short circuits between and , which can be detected using other techniques such as IDDQ testing. This method is found to be sensitive to resistor and capacitor process variation in the Wien bridge oscillator, but mitigating test steps are proposed.

Beschreibung: This paper proposes FuMicro, a fused microarchitecture integrating both in-order superscalar and Very Long Instruction Word (VLIW) in a single core. A processor with FuMicro microarchitecture can work under alternative in-order superscalar and VLIW mode, using the same pipeline and the same Instruction Set Architecture (ISA). Small modification to the compiler is made to expand the register file in VLIW mode. The decision of mode switch is made by software, and this does not need extra hardware. VLIW code can be exploited in the form of library function and the users will be exposed under only superscalar mode; by this means, we can provide the users with a convenient development environment. FuMicro could serve as a universal microarchitecture for it can be applied to different ISAs. In this paper, we focus on the implementation of FuMicro with ARM ISA. This architecture is evaluated on gem5, which is a cycle accurate microarchitecture simulation platform. By adopting FuMicro microarchitecture, the performance can be improved on an average of 10%, with the best performance improvement being 47.3%, compared with that under pure in-order superscalar mode. The result shows that FuMicro microarchitecture can improve Instruction Level Parallelism (ILP) significantly, making it promising to expand digital signal processing capability on a General Purpose Processor.

Beschreibung: A novel peak-statistical algorithm and judgment logic (PSJ) for multifrequency signal application of Autogain Control Loop (AGC) in hearing aid SoC is proposed in this paper. Under a condition of multifrequency signal, it tracks the amplitude change and makes statistical data of them. Finally, the judgment is decided and the circuit gain is controlled precisely. The AGC circuit is implemented with 0.13 μm 1P8M CMOS mixed-signal technology. Meanwhile, the low-power circuit topology and noise-optimizing technique are adopted to improve the signal-to-noise ratio (SNR) of our circuit. Under 1 V voltage supply, the peak SNR achieves 69.2 dB and total harmonic distortion (THD) is 65.3 dB with 89 μW power consumption.

Beschreibung: In VLSI industry, image signal processing algorithms are developed and evaluated using software models before implementation of RTL and firmware. After the finalization of the algorithm, software models are used as a golden reference model for the image signal processor (ISP) RTL and firmware development. In this paper, we are describing the unified and modular modeling framework of image signal processing algorithms used for different applications such as ISP algorithms development, reference for hardware (HW) implementation, reference for firmware (FW) implementation, and bit-true certification. The universal verification methodology- (UVM-) based functional verification framework of image signal processors using software reference models is described. Further, IP-XACT based tools for automatic generation of functional verification environment files and model map files are described. The proposed framework is developed both with host interface and with core using virtual register interface (VRI) approach. This modeling and functional verification framework is used in real-time image signal processing applications including cellphone, smart cameras, and image compression. The main motivation behind this work is to propose the best efficient, reusable, and automated framework for modeling and verification of image signal processor (ISP) designs. The proposed framework shows better results and significant improvement is observed in product verification time, verification cost, and quality of the designs.

Beschreibung: The increased number of complex functional units exerts high power-density within a very-large-scale integration (VLSI) chip which results in overheating. Power-densities directly converge into temperature which reduces the yield of the circuit. An adverse effect of power-density reduction is the increase in area. So, there is a trade-off between area and power-density. In this paper, we introduce a Shared Reed-Muller Decision Diagram (SRMDD) based on fixed polarity AND-XOR decomposition to represent multioutput Boolean functions. By recursively applying transformations and reductions, we obtained a compact SRMDD. A heuristic based on Genetic Algorithm (GA) increases the sharing of product terms by judicious choice of polarity of input variables in SRMDD expansion and a suitable area and power-density trade-off has been enumerated. This is the first effort ever to incorporate the power-density as a measure of temperature estimation in AND-XOR expansion process. The results of logic synthesis are incorporated with physical design in CADENCE digital synthesis tool to obtain the floor-plan silicon area and power profile. The proposed thermal-aware synthesis has been validated by obtaining absolute temperature of the synthesized circuits using HotSpot tool. We have experimented with 29 benchmark circuits. The minimized AND-XOR circuit realization shows average savings up to 15.23% improvement in silicon area and up to 17.02% improvement in temperature over the sum-of-product (SOP) based logic minimization.

Beschreibung: The gate level body biasing (GLBB) is assessed in the context of ultra-low-voltage logic designs. To this purpose, a GLBB mirror full adder is implemented by using a commercial 45 nm bulk CMOS triple-well technology and compared to equivalent conventional zero body-biased CMOS and dynamic threshold voltage MOSFET (DTMOS) circuits under different running conditions. Postlayout simulations demonstrate that, at the parity of leakage power consumption, the GLBB technique exhibits a significant concurrent reduction of the energy per operation and the delay in comparison to the conventional CMOS and DTMOS approaches. The silicon area required by the GLBB full adder is halved with respect to the equivalent DTMOS implementation, but it is higher in comparison to conventional CMOS design. Performed analysis also proves that the GLBB solution exhibits a high level of robustness against temperature fluctuations and process variations.

Beschreibung: With continued process scaling, CMOS has become a viable technology for the design of high-performance low noise amplifiers (LNAs) in the radio frequency (RF) regime. This paper describes the design of RF LNAs using a geometric programming (GP) optimization method. An important challenge for RF LNAs designed at nanometer scale geometries is the excess thermal noise observed in the MOSFETs. An extensive survey of analytical models and experimental results reported in the literature is carried out to quantify the issue of excessive thermal noise for short-channel MOSFETs. Short channel effects such as channel-length modulation and velocity saturation effects are also accounted for in our optimization process. The GP approach is able to efficiently calculate the globally optimum solution. The approximations required to setup the equations and constraints to allow convex optimization are detailed. The method is applied to the design of inductive source degenerated common source amplifiers at the 90 nm and 180 nm technology nodes. The optimization results are validated through comparison with numerical simulations using Agilent’s Advanced Design Systems (ADS) software.

Beschreibung: A readout integrated circuit (ROIC) is a crucial part that determines the quality of imaging. In order to analyze the noise of a ROIC with distinct illustration of each noise source transferring, a modularized noise analysis method is proposed whose application is applied for a ROIC cell, where all the MOSFETs are optimized in subthreshold region, leading to the power dissipation 2.8 μW. The modularized noise analysis begins with the noise model built using transfer functions and afterwards presents the transfer process of noise in the form of matrix, through which we can describe the contribution of each noise source to the whole output noise clearly, besides optimizing the values of key components. The optimal noise performance is obtained under the limitation of layout area less than 30 μm × 30 μm, resulting in that the integration capacitor should be selected as 0.74 pF to achieve an optimal noise performance, the whole output noise reaching the minimum value at 74.1 μV. In the end transient simulations utilizing Verilog-A are carried out for comparisons. The results showing good agreement verify the feasibility of the method presented through matrix.

Beschreibung: The growing complexity and higher time-to-market pressure make the functional verification of modern large scale hardware systems more challenging. These challenges bring the requirement of a high quality testbench that is capable of thoroughly verifying the design. To reveal a bug, the testbench needs to activate it by stimulus, propagate the erroneous behaviors to some checked points, and detect it at these checked points by checkers. However, current dominant verification approaches focus only on the activation aspect using a coverage model which is not qualified and ignore the propagation and detection aspects. Using a new metric, this paper qualifies the testbench by mutation analysis technique with the consideration of the quality of the stimulus, the coverage model, and the checkers. Then the testbench is iteratively refined according to the qualification feedback. We have conducted experiments on two designs of different scales to demonstrate the effectiveness of the proposed method in improving the quality of the testbench.

Beschreibung: With the increase in soft failures in deep submicron ICs, online testing is becoming an integral part of design for testability. Some techniques for online testing of asynchronous circuits are proposed in the literature, which involves development of a checker that verifies the correctness of the protocol. This checker involves Mutex blocks making its area overhead quite high. In this paper, we have adapted the Theory of Fault Detection and Diagnosis available in the literature on Discrete Event Systems to online testing of speed independent asynchronous circuits. The scheme involves development of a state based model of the circuit, under normal and various stuck-at fault conditions, and finally designing state estimators termed as detectors. The detectors monitor the circuit online and determine whether it is functioning in normal/failure mode. The main advantages are nonintrusiveness and low area overheads compared to similar schemes reported in the literature.

Beschreibung: The increased number of complex functional units exerts high power-density within a very-large-scale integration (VLSI) chip which results in overheating. Power-densities directly converge into temperature which reduces the yield of the circuit. An adverse effect of power-density reduction is the increase in area. So, there is a trade-off between area and power-density. In this paper, we introduce a Shared Reed-Muller Decision Diagram (SRMDD) based on fixed polarity AND-XOR decomposition to represent multioutput Boolean functions. By recursively applying transformations and reductions, we obtained a compact SRMDD. A heuristic based on Genetic Algorithm (GA) increases the sharing of product terms by judicious choice of polarity of input variables in SRMDD expansion and a suitable area and power-density trade-off has been enumerated. This is the first effort ever to incorporate the power-density as a measure of temperature estimation in AND-XOR expansion process. The results of logic synthesis are incorporated with physical design in CADENCE digital synthesis tool to obtain the floor-plan silicon area and power profile. The proposed thermal-aware synthesis has been validated by obtaining absolute temperature of the synthesized circuits using HotSpot tool. We have experimented with 29 benchmark circuits. The minimized AND-XOR circuit realization shows average savings up to 15.23% improvement in silicon area and up to 17.02% improvement in temperature over the sum-of-product (SOP) based logic minimization.

Beschreibung: UM-BUS is a novel dynamically reconfigurable high-speed serial bus for embedded systems. It can achieve fault tolerance by detecting the channel status in real time and reconfigure dynamically at run-time. The bus supports direct interconnections between up to eight master nodes and multiple slave nodes. In order to solve the time synchronization problem among master nodes, this paper proposes a novel time synchronization method, which can meet the requirement of time precision in UM-BUS. In this proposed method, time is firstly broadcasted through time broadcast packets. Then, the transmission delay and time deviations via three handshakes during link self-checking and channel detection can be worked out referring to the IEEE 1588 protocol. Thereby, each node calibrates its own time according to the broadcasted time. The proposed method has been proved to meet the requirement of real-time time synchronization. The experimental results show that the synchronous precision can achieve a bias less than 20 ns.

Beschreibung: The physical constraints of ever-shrinking CMOS transistors are rapidly approaching atomistic and quantum mechanical limits. Therefore, research is now directed towards the development of nanoscale devices that could work efficiently in the sub-10 nm regime. This coupled with the fact that recent design trend for analog signal processing applications is moving towards current-mode circuits which offer lower voltage swings, higher bandwidth, and better signal linearity is the motivation for this work. A digitally controlled DVCC has been realized using CNFETs. This work exploited the CNFET’s parameters like chirality, pitch, and numbers of CNTs to perform the digital control operation. The circuit has minimum number of transistors and can control the output current digitally. A similar CMOS circuit with 32 nm CMOS parameters was also simulated and compared. The result shows that CMOS-based circuit requires 418.6 μW while CNFET-based circuit consumes 352.1 μW only. Further, the proposed circuit is used to realize a CNFET-based instrumentation amplifier with digitally programmable gain. The amplifier has a CMRR of 100 dB and ICMR equal to 0.806 V. The 3 dB bandwidth of the amplifier is 11.78 GHz which is suitable for the applications like navigation, radar instrumentation, and high-frequency signal amplification and conditioning.

Beschreibung: This work reports an effective design of cache system for Chip Multiprocessors (CMPs). It introduces built-in logic for verification of cache coherence in CMPs realizing directory based protocol. It is developed around the cellular automata (CA) machine, invented by John von Neumann in the 1950s. A special class of CA referred to as single length cycle 2-attractor cellular automata (TACA) has been planted to detect the inconsistencies in cache line states of processors’ private caches. The TACA module captures coherence status of the CMPs’ cache system and memorizes any inconsistent recording of the cache line states during the processors’ reference to a memory block. Theory has been developed to empower a TACA to analyse the cache state updates and then to settle to an attractor state indicating quick decision on a faulty recording of cache line status. The introduction of segmentation of the CMPs’ processor pool ensures a better efficiency, in determining the inconsistencies, by reducing the number of computation steps in the verification logic. The hardware requirement for the verification logic points to the fact that the overhead of proposed coherence verification module is much lesser than that of the conventional verification units and is insignificant with respect to the cost involved in CMPs’ cache system.

Beschreibung: In VLSI industry, image signal processing algorithms are developed and evaluated using software models before implementation of RTL and firmware. After the finalization of the algorithm, software models are used as a golden reference model for the image signal processor (ISP) RTL and firmware development. In this paper, we are describing the unified and modular modeling framework of image signal processing algorithms used for different applications such as ISP algorithms development, reference for hardware (HW) implementation, reference for firmware (FW) implementation, and bit-true certification. The universal verification methodology- (UVM-) based functional verification framework of image signal processors using software reference models is described. Further, IP-XACT based tools for automatic generation of functional verification environment files and model map files are described. The proposed framework is developed both with host interface and with core using virtual register interface (VRI) approach. This modeling and functional verification framework is used in real-time image signal processing applications including cellphone, smart cameras, and image compression. The main motivation behind this work is to propose the best efficient, reusable, and automated framework for modeling and verification of image signal processor (ISP) designs. The proposed framework shows better results and significant improvement is observed in product verification time, verification cost, and quality of the designs.

Beschreibung: Recently, we present a novel Mastrovito form of nonrecursive Karatsuba multiplier for all trinomials. Specifically, we found that related Mastrovito matrix is very simple for equally spaced trinomial (EST) combined with classic Karatsuba algorithm (KA), which leads to a highly efficient Karatsuba multiplier. In this paper, we consider a new special class of irreducible trinomial, namely, . Based on a three-term KA and shifted polynomial basis (SPB), a novel bit-parallel multiplier is derived with better space and time complexity. As a main contribution, the proposed multiplier costs about circuit gates of the fastest multipliers, while its time delay matches our former result. To the best of our knowledge, this is the first time that the space complexity bound is reached without increasing the gate delay.

Beschreibung: Multilevel Cell Spin-Transfer Torque Random Access Memory (MLC STT-RAM) is a promising nonvolatile memory technology to build registers for its natural immunity to electromagnetic radiation in rad-hard space environment. Unlike traditional SRAM-based registers, MLC STT-RAM exhibits unbalanced write state transitions due to the fact that the magnetization directions of hard and soft domains cannot be flipped independently. This feature leads to nonuniform costs of write states in terms of latency and energy. However, current SRAM-targeting register allocations do not have a clear understanding of the impact of the different write state-transition costs. As a result, those approaches heuristically select variables to be spilled without considering the spilling priority imposed by MLC STT-RAM. Aiming to address this limitation, this paper proposes a state-transition-aware spilling cost minimization (SSCM) policy, to save power when MLC STT-RAM is employed in register design. Specifically, the spilling cost model is first constructed according to the linear combination of different state-transition frequencies. Directed by the proposed cost model, the compiler picks up spilling candidates to achieve lower power and higher performance. Experimental results show that the proposed SSCM technique can save energy by 19.4% and improve the lifetime by 23.2% of MLC STT-RAM-based register design.

Beschreibung: This paper proposes FuMicro, a fused microarchitecture integrating both in-order superscalar and Very Long Instruction Word (VLIW) in a single core. A processor with FuMicro microarchitecture can work under alternative in-order superscalar and VLIW mode, using the same pipeline and the same Instruction Set Architecture (ISA). Small modification to the compiler is made to expand the register file in VLIW mode. The decision of mode switch is made by software, and this does not need extra hardware. VLIW code can be exploited in the form of library function and the users will be exposed under only superscalar mode; by this means, we can provide the users with a convenient development environment. FuMicro could serve as a universal microarchitecture for it can be applied to different ISAs. In this paper, we focus on the implementation of FuMicro with ARM ISA. This architecture is evaluated on gem5, which is a cycle accurate microarchitecture simulation platform. By adopting FuMicro microarchitecture, the performance can be improved on an average of 10%, with the best performance improvement being 47.3%, compared with that under pure in-order superscalar mode. The result shows that FuMicro microarchitecture can improve Instruction Level Parallelism (ILP) significantly, making it promising to expand digital signal processing capability on a General Purpose Processor.

Beschreibung: 3D integration can greatly benefit future many-cores by enabling low-latency three-dimensional Network-on-Chip (3D-NoC) topologies. However, due to high cost, low yield, and frequent failures of Through-Silicon Via (TSV), 3D-NoCs are most likely to include only a few vertical connections, resulting in incomplete topologies that pose new challenges in terms of deadlock-free routing and TSV assignment. The routers of such networks require a way to locate the nodes that have vertical connections, commonly known as elevators, and select one of them in order to be able to reach other layers when necessary. In this paper, several alternative TSV selection strategies requiring a constant amount of configurable bits per router are introduced. Each proposed solution consists of a configuration algorithm, which provides each router with the necessary information to locate the elevators, and a routing algorithm, which uses this information at runtime to route packets to an elevator. Our algorithms are compared by simulation to highlight the advantages and disadvantages of each solution under various scenarios, and hardware synthesis results demonstrate the scalability of the proposed approach and its suitability for cost-oriented designs.

Beschreibung: A low complexity all-digital background calibration technique based on statistics is proposed. The basic idea of the statistics calibration technique is that the output average energy of each channel of TIADC will be consistent ideally, since each channel samples the same input signal, and therefore the energy deviation directly reflects the mismatch errors of channels. In this work, the offset mismatch and gain mismatch are calibrated by an adaptive statistics calibration algorithm based on LMS iteration; the timing mismatch is estimated by performing the correlation calculation of the outputs of subchannels and corrected by an improved fractional delay filter based on Farrow structure. Applied to a four-channel 12-bit 400 MHz TIADC, simulation results show that, with calibration, the SNDR raises from 22.5 dB to 71.8 dB and ENOB rises from 3.4 bits to 11.6 bits for a 164.6 MHz sinusoidal input. Compared with traditional methods, the proposed schemes are more feasible to implement and consume less hardware resources.

Beschreibung: This paper presents a new proposal for three-input logic function implementation in MOS current mode logic (MCML) style. The conventional realization of such logic employs three levels of stacked source-coupled transistor pairs. It puts restriction on minimum power supply requirement and results in increased static power. The new proposal presents a circuit element named as quad-tail cell which reduces number of stacked source-coupled transistor levels by two. A three-input exclusive-OR (XOR) gate, a vital element in digital system design, is chosen to elaborate the approach. Its behavior is analyzed and SPICE simulations using TSMC 180 nm CMOS technology parameters are included to support the theoretical concept. The performance of the proposed circuit is compared with its counterparts based on CMOS complementary pass transistor logic, conventional MCML, and cascading of existing two input tripple-tail XOR cells and applying triple-tail concept in conventional MCML topology. It is found that the proposed XOR gate performs best in terms of most of the performance parameters. The sensitivity of the proposed XOR gate towards process variation shows a variation of 1.54 between the best and worst case. As an extension, a realization of 4 : 1 multiplexer has also been included.

Beschreibung: A novel peak-statistical algorithm and judgment logic (PSJ) for multifrequency signal application of Autogain Control Loop (AGC) in hearing aid SoC is proposed in this paper. Under a condition of multifrequency signal, it tracks the amplitude change and makes statistical data of them. Finally, the judgment is decided and the circuit gain is controlled precisely. The AGC circuit is implemented with 0.13 μm 1P8M CMOS mixed-signal technology. Meanwhile, the low-power circuit topology and noise-optimizing technique are adopted to improve the signal-to-noise ratio (SNR) of our circuit. Under 1 V voltage supply, the peak SNR achieves 69.2 dB and total harmonic distortion (THD) is 65.3 dB with 89 μW power consumption.

Beschreibung: Synthesis of reversible sequential circuits is a very new research area. It has been shown that such circuits can be implemented using quantum dot cellular automata. Other work has used traditional designs for sequential circuits and replaced the flip-flops and the gates with their reversible counterparts. Our earlier work uses a direct feedback method without any flip-flops, improving upon the replacement technique in both quantum cost and ancilla inputs. We present here a further improved version of the direct feedback method. Design examples show that the proposed method produces better results than our earlier method in terms of both quantum cost and ancilla inputs. We also propose the first technique for online testing of single line faults in sequential reversible circuits.

Beschreibung: This paper proposes a novel bus encoding method on MBUS in order to reduce the power consumption of system-on-chips (SoCs). The main contribution is to lower the bus activity by an average 64.55% and thus decrease the IO power consumption through reconfiguring the MBUS transmission. This method is effective because field-programmable gate array (FPGA) IOs are most likely to have very large capacitance associated with them and consequently dissipate a lot of dynamic power. Experimental result shows an average 70.96% total power reduction compared with the original MBUS implementation.

Beschreibung: Oscillation-based testing (OBT) has been proven to be a simple, yet effective VLSI test for numerous circuit types. This paper investigates, for the first time, the application of OBT verification for second generation current conveyors (CCIIs). The OBT is formed by connecting the CCII into a simple Wien bridge oscillator and monitoring both the amplitude and frequency of oscillation. The fault detection rate, taking into account both the open and short circuit fault simulation analyses, indicates 96.34% fault coverage using a combination of amplitude and frequency output sensing in all technology corners. The only nondetected faults are short circuits between and , which can be detected using other techniques such as IDDQ testing. This method is found to be sensitive to resistor and capacitor process variation in the Wien bridge oscillator, but mitigating test steps are proposed.

Beschreibung: A classic second-order coupled-capacitor Chebyshev bandpass filter using resonator of tunable active capacitor and inductor is presented. The low cost and small size of CMOS active components make the bandpass filter (BPF) attractive in fully integrated CMOS applications. The tunable active capacitor is designed to compensate active inductor’s resistance for resistive match in the resonator. In many design cases, more than 95% resistive loss is cancelled. Meanwhile, adjusting design parameter of the active component provides BPF tunability in center frequency, pass band, and pass band gain. Designed in 1.8 V 180 nanometer CMOS process, the BPF has a tuning frequency range of 758–864 MHz, a controllable pass band of 7.1–65.9 MHz, a quality factor of 12–107, a pass band gain of 6.5–18.1 dB, and a stopband rejection of 38–50 dB.

Beschreibung: Multilevel Cell Spin-Transfer Torque Random Access Memory (MLC STT-RAM) is a promising nonvolatile memory technology to build registers for its natural immunity to electromagnetic radiation in rad-hard space environment. Unlike traditional SRAM-based registers, MLC STT-RAM exhibits unbalanced write state transitions due to the fact that the magnetization directions of hard and soft domains cannot be flipped independently. This feature leads to nonuniform costs of write states in terms of latency and energy. However, current SRAM-targeting register allocations do not have a clear understanding of the impact of the different write state-transition costs. As a result, those approaches heuristically select variables to be spilled without considering the spilling priority imposed by MLC STT-RAM. Aiming to address this limitation, this paper proposes a state-transition-aware spilling cost minimization (SSCM) policy, to save power when MLC STT-RAM is employed in register design. Specifically, the spilling cost model is first constructed according to the linear combination of different state-transition frequencies. Directed by the proposed cost model, the compiler picks up spilling candidates to achieve lower power and higher performance. Experimental results show that the proposed SSCM technique can save energy by 19.4% and improve the lifetime by 23.2% of MLC STT-RAM-based register design.

Beschreibung: Nowadays, many new low power ASICs applications have emerged. This new market trend made the designer’s task of meeting the timing and routability requirements within the power budget more challenging. One of the major sources of power consumption in modern integrated circuits (ICs) is the Interconnect. In this paper, we present a novel Power and Timing-Driven global Placement (PTDP) algorithm. Its principle is to wrap a commercial timing-driven placer with a nets weighting mechanism to calculate the nets weights based on their timing and power consumption. The new calculated weight is used to drive the placement engine to place the cells connected by the critical power or timing nets close to each other and hence reduce the parasitic capacitances of the interconnects and, by consequence, improve the timing and power consumption of the design. This approach not only improves the design power consumption but facilitates also the routability with only a minor impact on the timing closure of a few designs. The experiments carried on 40 industrial designs of different nodes, sizes, and complexities and demonstrate that the proposed algorithm is able to achieve significant improvements on Quality of Results (QoR) compared with a commercial timing driven placement flow. We effectively reduce the interconnect power by an average of 11.5% that leads to a total power improvement of 5.4%, a timing improvement of 9.4%, 13.7%, and of 3.2% in Worst Negative Slack (WNS), Total Negative Slack (TNS), and total wirelength reduction, respectively.

Beschreibung: Timing optimization for logic circuits is one of the key steps in logic synthesis. Extant research data are mainly proposed based on various intelligence algorithms. Hence, they are neither comparable with timing optimization data collected by the mainstream electronic design automation (EDA) tool nor able to verify the superiority of intelligence algorithms to the EDA tool in terms of optimization ability. To address these shortcomings, a novel verification method is proposed in this study. First, a discrete particle swarm optimization (DPSO) algorithm was applied to optimize the timing of the mixed polarity Reed-Muller (MPRM) logic circuit. Second, the Design Compiler (DC) algorithm was used to optimize the timing of the same MPRM logic circuit through special settings and constraints. Finally, the timing optimization results of the two algorithms were compared based on MCNC benchmark circuits. The timing optimization results obtained using DPSO are compared with those obtained from DC, and DPSO demonstrates an average reduction of 9.7% in the timing delays of critical paths for a number of MCNC benchmark circuits. The proposed verification method directly ascertains whether the intelligence algorithm has a better timing optimization ability than DC.

Beschreibung: Synthesis of reversible sequential circuits is a very new research area. It has been shown that such circuits can be implemented using quantum dot cellular automata. Other work has used traditional designs for sequential circuits and replaced the flip-flops and the gates with their reversible counterparts. Our earlier work uses a direct feedback method without any flip-flops, improving upon the replacement technique in both quantum cost and ancilla inputs. We present here a further improved version of the direct feedback method. Design examples show that the proposed method produces better results than our earlier method in terms of both quantum cost and ancilla inputs. We also propose the first technique for online testing of single line faults in sequential reversible circuits.

Beschreibung: The physical constraints of ever-shrinking CMOS transistors are rapidly approaching atomistic and quantum mechanical limits. Therefore, research is now directed towards the development of nanoscale devices that could work efficiently in the sub-10 nm regime. This coupled with the fact that recent design trend for analog signal processing applications is moving towards current-mode circuits which offer lower voltage swings, higher bandwidth, and better signal linearity is the motivation for this work. A digitally controlled DVCC has been realized using CNFETs. This work exploited the CNFET’s parameters like chirality, pitch, and numbers of CNTs to perform the digital control operation. The circuit has minimum number of transistors and can control the output current digitally. A similar CMOS circuit with 32 nm CMOS parameters was also simulated and compared. The result shows that CMOS-based circuit requires 418.6 μW while CNFET-based circuit consumes 352.1 μW only. Further, the proposed circuit is used to realize a CNFET-based instrumentation amplifier with digitally programmable gain. The amplifier has a CMRR of 100 dB and ICMR equal to 0.806 V. The 3 dB bandwidth of the amplifier is 11.78 GHz which is suitable for the applications like navigation, radar instrumentation, and high-frequency signal amplification and conditioning.

Beschreibung: Wireless capsule endoscopy (WCE) is a painless diagnostic tool used by the physicians for endoscopic examination of the gastrointestinal track. The performance of the existing WCE systems is limited by high power consumption and low data rate transmission. In this paper, a 144 MHz FinFET On-Off Keying (OOK) transmitter is designed and integrated with a class-E power amplifier. It is implemented and simulated using 16 nm FinFET Predictive Technology Models. The proposed transmitter can achieve the data rate of 33 Mbps with average power consumption of 1.04 mW from a 0.85 V power supply in the simulation. This design outperforms the current state-of-the-art designs.

Beschreibung: This paper proposes a novel bus encoding method on MBUS in order to reduce the power consumption of system-on-chips (SoCs). The main contribution is to lower the bus activity by an average 64.55% and thus decrease the IO power consumption through reconfiguring the MBUS transmission. This method is effective because field-programmable gate array (FPGA) IOs are most likely to have very large capacitance associated with them and consequently dissipate a lot of dynamic power. Experimental result shows an average 70.96% total power reduction compared with the original MBUS implementation.

Beschreibung: Oscillation-based testing (OBT) has been proven to be a simple, yet effective VLSI test for numerous circuit types. This paper investigates, for the first time, the application of OBT verification for second generation current conveyors (CCIIs). The OBT is formed by connecting the CCII into a simple Wien bridge oscillator and monitoring both the amplitude and frequency of oscillation. The fault detection rate, taking into account both the open and short circuit fault simulation analyses, indicates 96.34% fault coverage using a combination of amplitude and frequency output sensing in all technology corners. The only nondetected faults are short circuits between and , which can be detected using other techniques such as IDDQ testing. This method is found to be sensitive to resistor and capacitor process variation in the Wien bridge oscillator, but mitigating test steps are proposed.

Beschreibung: 3D integration can greatly benefit future many-cores by enabling low-latency three-dimensional Network-on-Chip (3D-NoC) topologies. However, due to high cost, low yield, and frequent failures of Through-Silicon Via (TSV), 3D-NoCs are most likely to include only a few vertical connections, resulting in incomplete topologies that pose new challenges in terms of deadlock-free routing and TSV assignment. The routers of such networks require a way to locate the nodes that have vertical connections, commonly known as elevators, and select one of them in order to be able to reach other layers when necessary. In this paper, several alternative TSV selection strategies requiring a constant amount of configurable bits per router are introduced. Each proposed solution consists of a configuration algorithm, which provides each router with the necessary information to locate the elevators, and a routing algorithm, which uses this information at runtime to route packets to an elevator. Our algorithms are compared by simulation to highlight the advantages and disadvantages of each solution under various scenarios, and hardware synthesis results demonstrate the scalability of the proposed approach and its suitability for cost-oriented designs.

Beschreibung: Due to demand of information transfer through higher speed wireless communication network, it is time to think about security of important information to be transferred. Further, as these communication networks are part of open channel, to preserve the security of any Critical Information (CI) is really a challenging task in any real-time application. Data hiding techniques give more security and robustness of important CI against encryption or cryptographic software solutions. However, hardwired approach exhibits better solution not only in terms of reduction of complexity but also in terms of adaptive real-time output. This paper demonstrates frequency, Discrete Cosine Transform (DCT) domain Steganographic data hiding hardware solution for secret communication called Crypto-Stego-Real-Time (CSRT) System. The challenge is to design a secure algorithm keeping reliability of minimum distortion of original cover signal while embedding considerable amount of CI. Field Programmable Gate Array (FPGA) implementation shown in this paper is more secure, robust, and fast. Pipelining process while embedding enhances the speed of embedding, optimizes the memory utilization, and gives better Peak Signal to Noise Ratio (PSNR) and high robustness. Practically implemented hardware Steganographic solutions shown in this paper also give better performance than that of the current state-of-the-art hardware implementations.

Beschreibung: A novel peak-statistical algorithm and judgment logic (PSJ) for multifrequency signal application of Autogain Control Loop (AGC) in hearing aid SoC is proposed in this paper. Under a condition of multifrequency signal, it tracks the amplitude change and makes statistical data of them. Finally, the judgment is decided and the circuit gain is controlled precisely. The AGC circuit is implemented with 0.13 μm 1P8M CMOS mixed-signal technology. Meanwhile, the low-power circuit topology and noise-optimizing technique are adopted to improve the signal-to-noise ratio (SNR) of our circuit. Under 1 V voltage supply, the peak SNR achieves 69.2 dB and total harmonic distortion (THD) is 65.3 dB with 89 μW power consumption.

Beschreibung: This work reports an effective design of cache system for Chip Multiprocessors (CMPs). It introduces built-in logic for verification of cache coherence in CMPs realizing directory based protocol. It is developed around the cellular automata (CA) machine, invented by John von Neumann in the 1950s. A special class of CA referred to as single length cycle 2-attractor cellular automata (TACA) has been planted to detect the inconsistencies in cache line states of processors’ private caches. The TACA module captures coherence status of the CMPs’ cache system and memorizes any inconsistent recording of the cache line states during the processors’ reference to a memory block. Theory has been developed to empower a TACA to analyse the cache state updates and then to settle to an attractor state indicating quick decision on a faulty recording of cache line status. The introduction of segmentation of the CMPs’ processor pool ensures a better efficiency, in determining the inconsistencies, by reducing the number of computation steps in the verification logic. The hardware requirement for the verification logic points to the fact that the overhead of proposed coherence verification module is much lesser than that of the conventional verification units and is insignificant with respect to the cost involved in CMPs’ cache system.

Beschreibung: Recently, we present a novel Mastrovito form of nonrecursive Karatsuba multiplier for all trinomials. Specifically, we found that related Mastrovito matrix is very simple for equally spaced trinomial (EST) combined with classic Karatsuba algorithm (KA), which leads to a highly efficient Karatsuba multiplier. In this paper, we consider a new special class of irreducible trinomial, namely, . Based on a three-term KA and shifted polynomial basis (SPB), a novel bit-parallel multiplier is derived with better space and time complexity. As a main contribution, the proposed multiplier costs about circuit gates of the fastest multipliers, while its time delay matches our former result. To the best of our knowledge, this is the first time that the space complexity bound is reached without increasing the gate delay.

Beschreibung: In VLSI industry, image signal processing algorithms are developed and evaluated using software models before implementation of RTL and firmware. After the finalization of the algorithm, software models are used as a golden reference model for the image signal processor (ISP) RTL and firmware development. In this paper, we are describing the unified and modular modeling framework of image signal processing algorithms used for different applications such as ISP algorithms development, reference for hardware (HW) implementation, reference for firmware (FW) implementation, and bit-true certification. The universal verification methodology- (UVM-) based functional verification framework of image signal processors using software reference models is described. Further, IP-XACT based tools for automatic generation of functional verification environment files and model map files are described. The proposed framework is developed both with host interface and with core using virtual register interface (VRI) approach. This modeling and functional verification framework is used in real-time image signal processing applications including cellphone, smart cameras, and image compression. The main motivation behind this work is to propose the best efficient, reusable, and automated framework for modeling and verification of image signal processor (ISP) designs. The proposed framework shows better results and significant improvement is observed in product verification time, verification cost, and quality of the designs.

Beschreibung: A classic second-order coupled-capacitor Chebyshev bandpass filter using resonator of tunable active capacitor and inductor is presented. The low cost and small size of CMOS active components make the bandpass filter (BPF) attractive in fully integrated CMOS applications. The tunable active capacitor is designed to compensate active inductor’s resistance for resistive match in the resonator. In many design cases, more than 95% resistive loss is cancelled. Meanwhile, adjusting design parameter of the active component provides BPF tunability in center frequency, pass band, and pass band gain. Designed in 1.8 V 180 nanometer CMOS process, the BPF has a tuning frequency range of 758–864 MHz, a controllable pass band of 7.1–65.9 MHz, a quality factor of 12–107, a pass band gain of 6.5–18.1 dB, and a stopband rejection of 38–50 dB.

Beschreibung: This paper presents a new proposal for three-input logic function implementation in MOS current mode logic (MCML) style. The conventional realization of such logic employs three levels of stacked source-coupled transistor pairs. It puts restriction on minimum power supply requirement and results in increased static power. The new proposal presents a circuit element named as quad-tail cell which reduces number of stacked source-coupled transistor levels by two. A three-input exclusive-OR (XOR) gate, a vital element in digital system design, is chosen to elaborate the approach. Its behavior is analyzed and SPICE simulations using TSMC 180 nm CMOS technology parameters are included to support the theoretical concept. The performance of the proposed circuit is compared with its counterparts based on CMOS complementary pass transistor logic, conventional MCML, and cascading of existing two input tripple-tail XOR cells and applying triple-tail concept in conventional MCML topology. It is found that the proposed XOR gate performs best in terms of most of the performance parameters. The sensitivity of the proposed XOR gate towards process variation shows a variation of 1.54 between the best and worst case. As an extension, a realization of 4 : 1 multiplexer has also been included.

Beschreibung: A low complexity all-digital background calibration technique based on statistics is proposed. The basic idea of the statistics calibration technique is that the output average energy of each channel of TIADC will be consistent ideally, since each channel samples the same input signal, and therefore the energy deviation directly reflects the mismatch errors of channels. In this work, the offset mismatch and gain mismatch are calibrated by an adaptive statistics calibration algorithm based on LMS iteration; the timing mismatch is estimated by performing the correlation calculation of the outputs of subchannels and corrected by an improved fractional delay filter based on Farrow structure. Applied to a four-channel 12-bit 400 MHz TIADC, simulation results show that, with calibration, the SNDR raises from 22.5 dB to 71.8 dB and ENOB rises from 3.4 bits to 11.6 bits for a 164.6 MHz sinusoidal input. Compared with traditional methods, the proposed schemes are more feasible to implement and consume less hardware resources.

Beschreibung: More pronounced aging effects, more frequent early-life failures, and incomplete testing and verification processes due to time-to-market pressure in new fabrication technologies impose reliability challenges on forthcoming systems. A promising solution to these reliability challenges is self-test and self-reconfiguration with no or limited external control. In this work a scalable self-test mechanism for periodic online testing of many-core processor has been proposed. This test mechanism facilitates autonomous detection and omission of faulty cores and makes graceful degradation of the many-core architecture possible. Several test components are incorporated in the many-core architecture that distribute test stimuli, suspend normal operation of individual processing cores, apply test, and detect faulty cores. Test is performed concurrently with the system normal operation without any noticeable downtime at the application level. Experimental results show that the proposed test architecture is extensively scalable in terms of hardware overhead and performance overhead that makes it applicable to many-cores with more than a thousand processing cores.

Beschreibung: The fingerprint identification is an efficient biometric technique to authenticate human beings in real-time Big Data Analytics. In this paper, we propose an efficient Finite State Machine (FSM) based reconfigurable architecture for fingerprint recognition. The fingerprint image is resized, and Compound Linear Binary Pattern (CLBP) is applied on fingerprint, followed by histogram to obtain histogram CLBP features. Discrete Wavelet Transform (DWT) Level 2 features are obtained by the same methodology. The novel matching score of CLBP is computed using histogram CLBP features of test image and fingerprint images in the database. Similarly, the DWT matching score is computed using DWT features of test image and fingerprint images in the database. Further, the matching scores of CLBP and DWT are fused with arithmetic equation using improvement factor. The performance parameters such as TSR (Total Success Rate), FAR (False Acceptance Rate), and FRR (False Rejection Rate) are computed using fusion scores with correlation matching technique for FVC2004 DB3 Database. The proposed fusion based VLSI architecture is synthesized on Virtex xc5vlx30T-3 FPGA board using Finite State Machine resulting in optimized parameters.

Beschreibung: This paper proposes FuMicro, a fused microarchitecture integrating both in-order superscalar and Very Long Instruction Word (VLIW) in a single core. A processor with FuMicro microarchitecture can work under alternative in-order superscalar and VLIW mode, using the same pipeline and the same Instruction Set Architecture (ISA). Small modification to the compiler is made to expand the register file in VLIW mode. The decision of mode switch is made by software, and this does not need extra hardware. VLIW code can be exploited in the form of library function and the users will be exposed under only superscalar mode; by this means, we can provide the users with a convenient development environment. FuMicro could serve as a universal microarchitecture for it can be applied to different ISAs. In this paper, we focus on the implementation of FuMicro with ARM ISA. This architecture is evaluated on gem5, which is a cycle accurate microarchitecture simulation platform. By adopting FuMicro microarchitecture, the performance can be improved on an average of 10%, with the best performance improvement being 47.3%, compared with that under pure in-order superscalar mode. The result shows that FuMicro microarchitecture can improve Instruction Level Parallelism (ILP) significantly, making it promising to expand digital signal processing capability on a General Purpose Processor.

Beschreibung: UM-BUS is a novel dynamically reconfigurable high-speed serial bus for embedded systems. It can achieve fault tolerance by detecting the channel status in real time and reconfigure dynamically at run-time. The bus supports direct interconnections between up to eight master nodes and multiple slave nodes. In order to solve the time synchronization problem among master nodes, this paper proposes a novel time synchronization method, which can meet the requirement of time precision in UM-BUS. In this proposed method, time is firstly broadcasted through time broadcast packets. Then, the transmission delay and time deviations via three handshakes during link self-checking and channel detection can be worked out referring to the IEEE 1588 protocol. Thereby, each node calibrates its own time according to the broadcasted time. The proposed method has been proved to meet the requirement of real-time time synchronization. The experimental results show that the synchronous precision can achieve a bias less than 20 ns.

Beschreibung: A readout integrated circuit (ROIC) is a crucial part that determines the quality of imaging. In order to analyze the noise of a ROIC with distinct illustration of each noise source transferring, a modularized noise analysis method is proposed whose application is applied for a ROIC cell, where all the MOSFETs are optimized in subthreshold region, leading to the power dissipation 2.8 μW. The modularized noise analysis begins with the noise model built using transfer functions and afterwards presents the transfer process of noise in the form of matrix, through which we can describe the contribution of each noise source to the whole output noise clearly, besides optimizing the values of key components. The optimal noise performance is obtained under the limitation of layout area less than 30 μm × 30 μm, resulting in that the integration capacitor should be selected as 0.74 pF to achieve an optimal noise performance, the whole output noise reaching the minimum value at 74.1 μV. In the end transient simulations utilizing Verilog-A are carried out for comparisons. The results showing good agreement verify the feasibility of the method presented through matrix.

Beschreibung: Ultrasound imaging is one of the available imaging techniques used for diagnosis of kidney abnormalities, which may be like change in shape and position and swelling of limb; there are also other Kidney abnormalities such as formation of stones, cysts, blockage of urine, congenital anomalies, and cancerous cells. During surgical processes it is vital to recognize the true and precise location of kidney stone. The detection of kidney stones using ultrasound imaging is a highly challenging task as they are of low contrast and contain speckle noise. This challenge is overcome by employing suitable image processing techniques. The ultrasound image is first preprocessed to get rid of speckle noise using the image restoration process. The restored image is smoothened using Gabor filter and the subsequent image is enhanced by histogram equalization. The preprocessed image is achieved with level set segmentation to detect the stone region. Segmentation process is employed twice for getting better results; first to segment kidney portion and then to segment the stone portion, respectively. In this work, the level set segmentation uses two terms, namely, momentum and resilient propagation () to detect the stone portion. After segmentation, the extracted region of the kidney stone is given to Symlets, Biorthogonal (bio3.7, bio3.9, and bio4.4), and Daubechies lifting scheme wavelet subbands to extract energy levels. These energy levels provide evidence about presence of stone, by comparing them with that of the normal energy levels. They are trained by multilayer perceptron (MLP) and back propagation (BP) ANN to classify and its type of stone with an accuracy of 98.8%. The prosed work is designed and real time is implemented on both Filed Programmable Gate Array Vertex-2Pro FPGA using Xilinx System Generator (XSG) Verilog and Matlab 2012a.

Beschreibung: With continued process scaling, CMOS has become a viable technology for the design of high-performance low noise amplifiers (LNAs) in the radio frequency (RF) regime. This paper describes the design of RF LNAs using a geometric programming (GP) optimization method. An important challenge for RF LNAs designed at nanometer scale geometries is the excess thermal noise observed in the MOSFETs. An extensive survey of analytical models and experimental results reported in the literature is carried out to quantify the issue of excessive thermal noise for short-channel MOSFETs. Short channel effects such as channel-length modulation and velocity saturation effects are also accounted for in our optimization process. The GP approach is able to efficiently calculate the globally optimum solution. The approximations required to setup the equations and constraints to allow convex optimization are detailed. The method is applied to the design of inductive source degenerated common source amplifiers at the 90 nm and 180 nm technology nodes. The optimization results are validated through comparison with numerical simulations using Agilent’s Advanced Design Systems (ADS) software.

Beschreibung: Low-power analog-to-digital converter (ADC) is a crucial part of wearable or implantable bioelectronics. In order to reduce the power of successive-approximation-register (SAR) ADC, an improved energy-efficient capacitor switching scheme of SAR ADC is proposed for implantable bioelectronic applications. With sequence initialization, novel logic control, and capacitive subconversion, 97.6% switching energy is reduced compared to the traditional structure. Moreover, thanks to the top-plate sampling and capacitive subconversion, 87% input-capacitance reduction can be achieved over the conventional structure. A 10-bit SAR ADC with this proposed switching scheme is realized in 65 nm CMOS. With 1.514 KHz differential sinusoidal input signals sampled at 50 KS/s, the ADC achieves an SNDR of 61.4 dB and only consumes power of 450 nW. The area of this SAR ADC IP core is only 136 μm × 176 μm, making it also area-efficient and very suitable for biomedical electronics application.

Beschreibung: Addition usually affects the overall performance of digital systems and an arithmetic function. Adders are most widely used in applications like multipliers, DSP (i.e., FFT, FIR, and IIR). In digital adders, the speed of addition is constrained by the time required to propagate a carry through the adder. Various techniques have been proposed to design fast adders. We have derived architectures for carry-select adder (CSA), Common Boolean Logic (CBL) based adders, ripple carry adder (RCA), and Carry Look-Ahead Adder (CLA) for 8-, 16-, 32-, and 64-bit length. In this work we have done comparative analysis of different types of adders in Synopsis Design Compiler using different standard cell libraries at 32/28 nm. Also, the designs are analyzed for the stuck at faults (s-a-0, s-a-1) using Synopsis TetraMAX.

Beschreibung: The gate level body biasing (GLBB) is assessed in the context of ultra-low-voltage logic designs. To this purpose, a GLBB mirror full adder is implemented by using a commercial 45 nm bulk CMOS triple-well technology and compared to equivalent conventional zero body-biased CMOS and dynamic threshold voltage MOSFET (DTMOS) circuits under different running conditions. Postlayout simulations demonstrate that, at the parity of leakage power consumption, the GLBB technique exhibits a significant concurrent reduction of the energy per operation and the delay in comparison to the conventional CMOS and DTMOS approaches. The silicon area required by the GLBB full adder is halved with respect to the equivalent DTMOS implementation, but it is higher in comparison to conventional CMOS design. Performed analysis also proves that the GLBB solution exhibits a high level of robustness against temperature fluctuations and process variations.

Beschreibung: The increased number of complex functional units exerts high power-density within a very-large-scale integration (VLSI) chip which results in overheating. Power-densities directly converge into temperature which reduces the yield of the circuit. An adverse effect of power-density reduction is the increase in area. So, there is a trade-off between area and power-density. In this paper, we introduce a Shared Reed-Muller Decision Diagram (SRMDD) based on fixed polarity AND-XOR decomposition to represent multioutput Boolean functions. By recursively applying transformations and reductions, we obtained a compact SRMDD. A heuristic based on Genetic Algorithm (GA) increases the sharing of product terms by judicious choice of polarity of input variables in SRMDD expansion and a suitable area and power-density trade-off has been enumerated. This is the first effort ever to incorporate the power-density as a measure of temperature estimation in AND-XOR expansion process. The results of logic synthesis are incorporated with physical design in CADENCE digital synthesis tool to obtain the floor-plan silicon area and power profile. The proposed thermal-aware synthesis has been validated by obtaining absolute temperature of the synthesized circuits using HotSpot tool. We have experimented with 29 benchmark circuits. The minimized AND-XOR circuit realization shows average savings up to 15.23% improvement in silicon area and up to 17.02% improvement in temperature over the sum-of-product (SOP) based logic minimization.

Beschreibung: The growing complexity and higher time-to-market pressure make the functional verification of modern large scale hardware systems more challenging. These challenges bring the requirement of a high quality testbench that is capable of thoroughly verifying the design. To reveal a bug, the testbench needs to activate it by stimulus, propagate the erroneous behaviors to some checked points, and detect it at these checked points by checkers. However, current dominant verification approaches focus only on the activation aspect using a coverage model which is not qualified and ignore the propagation and detection aspects. Using a new metric, this paper qualifies the testbench by mutation analysis technique with the consideration of the quality of the stimulus, the coverage model, and the checkers. Then the testbench is iteratively refined according to the qualification feedback. We have conducted experiments on two designs of different scales to demonstrate the effectiveness of the proposed method in improving the quality of the testbench.

Beschreibung: A low complexity all-digital background calibration technique based on statistics is proposed. The basic idea of the statistics calibration technique is that the output average energy of each channel of TIADC will be consistent ideally, since each channel samples the same input signal, and therefore the energy deviation directly reflects the mismatch errors of channels. In this work, the offset mismatch and gain mismatch are calibrated by an adaptive statistics calibration algorithm based on LMS iteration; the timing mismatch is estimated by performing the correlation calculation of the outputs of subchannels and corrected by an improved fractional delay filter based on Farrow structure. Applied to a four-channel 12-bit 400 MHz TIADC, simulation results show that, with calibration, the SNDR raises from 22.5 dB to 71.8 dB and ENOB rises from 3.4 bits to 11.6 bits for a 164.6 MHz sinusoidal input. Compared with traditional methods, the proposed schemes are more feasible to implement and consume less hardware resources.

Beschreibung: The physical constraints of ever-shrinking CMOS transistors are rapidly approaching atomistic and quantum mechanical limits. Therefore, research is now directed towards the development of nanoscale devices that could work efficiently in the sub-10 nm regime. This coupled with the fact that recent design trend for analog signal processing applications is moving towards current-mode circuits which offer lower voltage swings, higher bandwidth, and better signal linearity is the motivation for this work. A digitally controlled DVCC has been realized using CNFETs. This work exploited the CNFET’s parameters like chirality, pitch, and numbers of CNTs to perform the digital control operation. The circuit has minimum number of transistors and can control the output current digitally. A similar CMOS circuit with 32 nm CMOS parameters was also simulated and compared. The result shows that CMOS-based circuit requires 418.6 μW while CNFET-based circuit consumes 352.1 μW only. Further, the proposed circuit is used to realize a CNFET-based instrumentation amplifier with digitally programmable gain. The amplifier has a CMRR of 100 dB and ICMR equal to 0.806 V. The 3 dB bandwidth of the amplifier is 11.78 GHz which is suitable for the applications like navigation, radar instrumentation, and high-frequency signal amplification and conditioning.

Beschreibung: The fingerprint identification is an efficient biometric technique to authenticate human beings in real-time Big Data Analytics. In this paper, we propose an efficient Finite State Machine (FSM) based reconfigurable architecture for fingerprint recognition. The fingerprint image is resized, and Compound Linear Binary Pattern (CLBP) is applied on fingerprint, followed by histogram to obtain histogram CLBP features. Discrete Wavelet Transform (DWT) Level 2 features are obtained by the same methodology. The novel matching score of CLBP is computed using histogram CLBP features of test image and fingerprint images in the database. Similarly, the DWT matching score is computed using DWT features of test image and fingerprint images in the database. Further, the matching scores of CLBP and DWT are fused with arithmetic equation using improvement factor. The performance parameters such as TSR (Total Success Rate), FAR (False Acceptance Rate), and FRR (False Rejection Rate) are computed using fusion scores with correlation matching technique for FVC2004 DB3 Database. The proposed fusion based VLSI architecture is synthesized on Virtex xc5vlx30T-3 FPGA board using Finite State Machine resulting in optimized parameters.

Beschreibung: The gate level body biasing (GLBB) is assessed in the context of ultra-low-voltage logic designs. To this purpose, a GLBB mirror full adder is implemented by using a commercial 45 nm bulk CMOS triple-well technology and compared to equivalent conventional zero body-biased CMOS and dynamic threshold voltage MOSFET (DTMOS) circuits under different running conditions. Postlayout simulations demonstrate that, at the parity of leakage power consumption, the GLBB technique exhibits a significant concurrent reduction of the energy per operation and the delay in comparison to the conventional CMOS and DTMOS approaches. The silicon area required by the GLBB full adder is halved with respect to the equivalent DTMOS implementation, but it is higher in comparison to conventional CMOS design. Performed analysis also proves that the GLBB solution exhibits a high level of robustness against temperature fluctuations and process variations.

Beschreibung: More pronounced aging effects, more frequent early-life failures, and incomplete testing and verification processes due to time-to-market pressure in new fabrication technologies impose reliability challenges on forthcoming systems. A promising solution to these reliability challenges is self-test and self-reconfiguration with no or limited external control. In this work a scalable self-test mechanism for periodic online testing of many-core processor has been proposed. This test mechanism facilitates autonomous detection and omission of faulty cores and makes graceful degradation of the many-core architecture possible. Several test components are incorporated in the many-core architecture that distribute test stimuli, suspend normal operation of individual processing cores, apply test, and detect faulty cores. Test is performed concurrently with the system normal operation without any noticeable downtime at the application level. Experimental results show that the proposed test architecture is extensively scalable in terms of hardware overhead and performance overhead that makes it applicable to many-cores with more than a thousand processing cores.

Beschreibung: Wireless capsule endoscopy (WCE) is a painless diagnostic tool used by the physicians for endoscopic examination of the gastrointestinal track. The performance of the existing WCE systems is limited by high power consumption and low data rate transmission. In this paper, a 144 MHz FinFET On-Off Keying (OOK) transmitter is designed and integrated with a class-E power amplifier. It is implemented and simulated using 16 nm FinFET Predictive Technology Models. The proposed transmitter can achieve the data rate of 33 Mbps with average power consumption of 1.04 mW from a 0.85 V power supply in the simulation. This design outperforms the current state-of-the-art designs.

Beschreibung: Nowadays, many new low power ASICs applications have emerged. This new market trend made the designer’s task of meeting the timing and routability requirements within the power budget more challenging. One of the major sources of power consumption in modern integrated circuits (ICs) is the Interconnect. In this paper, we present a novel Power and Timing-Driven global Placement (PTDP) algorithm. Its principle is to wrap a commercial timing-driven placer with a nets weighting mechanism to calculate the nets weights based on their timing and power consumption. The new calculated weight is used to drive the placement engine to place the cells connected by the critical power or timing nets close to each other and hence reduce the parasitic capacitances of the interconnects and, by consequence, improve the timing and power consumption of the design. This approach not only improves the design power consumption but facilitates also the routability with only a minor impact on the timing closure of a few designs. The experiments carried on 40 industrial designs of different nodes, sizes, and complexities and demonstrate that the proposed algorithm is able to achieve significant improvements on Quality of Results (QoR) compared with a commercial timing driven placement flow. We effectively reduce the interconnect power by an average of 11.5% that leads to a total power improvement of 5.4%, a timing improvement of 9.4%, 13.7%, and of 3.2% in Worst Negative Slack (WNS), Total Negative Slack (TNS), and total wirelength reduction, respectively.

Beschreibung: Multilevel Cell Spin-Transfer Torque Random Access Memory (MLC STT-RAM) is a promising nonvolatile memory technology to build registers for its natural immunity to electromagnetic radiation in rad-hard space environment. Unlike traditional SRAM-based registers, MLC STT-RAM exhibits unbalanced write state transitions due to the fact that the magnetization directions of hard and soft domains cannot be flipped independently. This feature leads to nonuniform costs of write states in terms of latency and energy. However, current SRAM-targeting register allocations do not have a clear understanding of the impact of the different write state-transition costs. As a result, those approaches heuristically select variables to be spilled without considering the spilling priority imposed by MLC STT-RAM. Aiming to address this limitation, this paper proposes a state-transition-aware spilling cost minimization (SSCM) policy, to save power when MLC STT-RAM is employed in register design. Specifically, the spilling cost model is first constructed according to the linear combination of different state-transition frequencies. Directed by the proposed cost model, the compiler picks up spilling candidates to achieve lower power and higher performance. Experimental results show that the proposed SSCM technique can save energy by 19.4% and improve the lifetime by 23.2% of MLC STT-RAM-based register design.