ALBERT

Description: The reactions of As 2 O 3 , SbCl 3 , and (BiO) 2 CO 3 with oleum (65 % SO 3 ) yielded single crystals of As(S 2 O 7 )(HS 2 O 7 ) [monoclinic, P 2 1 / c , Z = 4, a = 16.549(1), b = 6.6743(5), c = 9.9498(6) Å, β = 102.672(8)°, V = 1072.672(8) Å 3 ], Sb 2 (SO 4 ) 2 (S 2 O 7 ) [monoclinic, P 2 1 / n , Z = 4, a = 9.1586(2), b = 6.9981(2), c = 17.7956(4) Å, β = 100.9690(8)°, V = 1119.73(5) Å 3 ], and Bi 2 (S 2 O 7 ) 3 [triclinic, P , Z = 2, a = 6.5734(1), b = 10.1954(2), c = 11.5121(2) Å, α = 90.996(1)°, β = 96.976(1)°, γ = 94.870(1)°, V = 762.75(2) Å 3 ]. As(S 2 O 7 )(HS 2 O 7 ) shows the arsenic atoms in a trigonal pyramidal coordination of the oxygen atoms of one chelating S 2 O 7 2– and one monodentate HS 2 O 7 – group. The distinct As(S 2 O 7 )(HS 2 O 7 ) molecules are connected with each other by hydrogen bonds to form layers. Sb 2 (SO 4 ) 2 (S 2 O 7 ) shows the Sb 3+ cations in a seesaw-type coordination of oxygen atoms from both anions. In Bi 2 (S 2 O 7 ) 3 the Bi 3+ cations are in a square prismatic oxygen coordination of disulfate units. The antimony and the bismuth compounds exhibit complex three-dimensionally linked structures. The syntheses and the crystal structures, as well as the thermal decomposition of Sb 2 (SO 4 ) 2 (S 2 O 7 ) are presented.

Description: Silver acetate AgOAc reacts with dry liquid ammonia under the formation of colorless needle-shaped crystals of diammine silver(I) acetate [Ag(NH 3 ) 2 ]OAc ( 1 ). The compound crystallizes in the monoclinic space group P 2 1 / c with a = 8.0205(2), b = 12.4161(3), c = 6.0938(2) Å, β = 107.741(4)°, and V = 577.98(3) Å 3 at 123 K with Z = 4. The crystal structure shows the presence of almost linear [Ag(NH 3 ) 2 ] + cations, which are arranged in a corrugated chain of equidistant silver atoms. The Ag–Ag distance is 3.1089(11) Å, which falls in the range of “argentophilic” interactions. After warming to room temperature and removal of the solvent, compound 1 was found unchanged as evidenced by powder X-ray diffraction, thermogravimetric and mass-spectrometric analysis, as well as IR and Raman spectroscopy.

Description: A series of chalcogenidoantimonates, namely [Zn(NH 3 ) 6 ](Sb III 4 S 7 ) ( 1 ), [Zn(NH 3 ) 6 ]{Zn(NH 3 ) 3 Sb V S 4 } 2 · NH 3 ( 2 ), [Mn(NH 3 ) 6 ](Sb III Se 2 ) 2 ( 3 ) and [Zn(NH 3 ) 4 ]{Zn(NH 3 )Sb III Se 3 } 2 · 3NH 3 ( 4 ) are synthesized by solvothermal technique in liquid ammonia at 50 °C from elemental zinc or manganese, antimony and sulfur or selenium. 1 (space group P ) and 2 ( P ) crystallize centrosymmetrically, whereas 3 ( Pna 2 1 ) and 4 ( P 2 1 ) represent polar structures. All compounds contain discrete cationic [Zn(NH 3 ) 4 ] 2+ , [Zn(NH 3 ) 6 ] 2+ , and [Mn(NH 3 ) 6 ] 2+ ammine complexes. In the anionic structure parts, corner-connected trigonal-pyramidal SbS 3 and SbSe 3 are the characteristic building units. 1 and 4 contain 2D polymeric anions, in the latter case with Zn 2+ cations incorporated in a selenidoantimonate(III) network. The polymeric anion in the structure of 3 is a helical chain. 2 is a molecular compound and contains dinuclear anions [S 3 Sb–S–Zn(NH 3 ) 3 ] 2– with Sb V . Raman measurements show the Sb–Ch valence vibrations in the expected region between 250–370 cm –1 for 1 and at 212 cm –1 for 4 . According to the reflectance spectrum 4 is a semiconductor with an optical band gap of 2.05(5) eV.

Description: Homogenous liquid precursor for ZrC – SiC was prepared by blending of Zr ( OC 4 H 9 ) 4 and Poly[(methylsilylene)acetylene]. This precursor could be cured at 250°C and converted into binary ZrC – SiC composite ceramics upon heat treatment at 1700°C. The pyrolysis mechanism and optimal molar ratio of the precursor were investigated by XRD. The morphology and elements analyses were conducted by SEM and corresponding energy-dispersive spectrometer. The evolution of carbon during ceramization was studied by Raman spectroscopy. The results showed that the precursor samples heat treated at 900°C consisted of t- ZrO 2 (main phase) and m- ZrO 2 (minor phase). The higher temperature induced phase transformation and t- ZrO 2 converted into m- ZrO 2 . Further heating led to the formation of ZrC and SiC due to the carbothermal reduction, and the ceramic sample changed from compact to porous due to the generation of carbon oxides. With the increasing molar ratios of C / Zr , the residual oxides in 1700°C ceramic samples converted into ZrC and almost pure ZrC – SiC composite ceramics could be obtained in ZS-3 sample. The Zr , Si , and C elements were well distributed in the obtained ceramics powders and particles with a distribution of 100 ~ 300 nm consisted of well-crystallized ZrC and SiC phases.

Description: . Sr 2 CoOsO 6 , a new osmium based ordered semiconductor double perovskite was prepared by solid state synthesis from the respective binary oxides. Room temperature PXRD analysis shows the compound to be tetragonal [ I 4/ m ; a = 5.5503(1) Å and c = 7.9320(1) Å], whereas low temperature synchrotron data refinement has revealed a second monoclinic polymorph [ I 2/ m ; a = 5.4969(2) Å, b = 5.4979(2) Å, c = 8.0090(1) Å and γ = 90.527(1)°] with a fully ordered rocksalt arrangement of cobalt and osmium atoms over the perovskite B -sites. Heat capacity and magnetic measurements indicate that Sr 2 CoOsO 6 shows antiferromagnetic ordering below T N = 108 K followed by a second magnetic transition at T 2 = 65 K. It was shown that the change from the tetragonal to the monoclinic phase occurs at T N .

Description: . The ternary germanides RE Rh 6 Ge 4 ( RE = Y, La, Pr, Nd, Sm–Lu) were obtained by arc-melting of the elements and subsequent annealing. Single crystals were grown from bismuth fluxes. The samples were studied by X-ray diffraction on powders. The structures of five members were refined from single crystal diffraction data: LiCo 6 P 4 type, P m 2, a = 715.8(1), c = 387.33(8) pm, wR = 0.0238, 332 F 2 values for LaRh 6 Ge 4 , a = 715.0(1), c = 384.96(7) pm, wR = 0.0211, 329 F 2 values for PrRh 6 Ge 4 , a = 714.28(9), c = 382.57(6) pm, wR = 0.0136, 327 F 2 values for SmRh 6 Ge 4 , a = 714.2(1), c = 381.6(1), wR = 0.0270, 327 F 2 values for GdRh 6 Ge 4 , and a = 714.2(2), c = 379.0(1) pm, wR = 0.0273, 324 F 2 values for HoRh 6 Ge 4 with 19 variables per refinement. The RE Rh 6 Ge 4 structures have two crystallographically independent germanium sites in trigonal prismatic coordination, manifesting the close structural relationship with metal-rich phosphides. Together, the rhodium and germanium atoms build up three-dimensional [Rh 6 Ge 4 ] networks, which leave large channels for the rare earth atoms. Each rare earth atom has coordination number 20 with 12 Rh, 6 Ge, and 2 RE neighbors. Temperature dependent magnetic susceptibility measurements indicate Pauli paramagnetic behavior for YRh 6 Ge 4 , LaRh 6 Ge 4 , and LuRh 6 Ge 4 . The compounds RE Rh 6 Ge 4 ( RE = Gd–Yb) are Curie-Weiss paramagnets. Antiferromagnetic ordering was observed at 8.4(5) K (GdRh 6 Ge 4 ), 13.6(5) K (TbRh 6 Ge 4 ), 5.1(5) K (DyRh 6 Ge 4 ), and 8.9(5) K (YbRh 6 Ge 4 ). DyRh 6 Ge 4 and YbRh 6 Ge 4 show metamagnetic transitions at 2.5(5) and 45(2) kOe, respectively.

Description: Reaction of manganese(II) thiocyanate with 2-chloropyrazine leads always to the formation of a compound of composition Mn(NCS) 2 (2-chloropyrazine) 4 ( 1 - Mn/Cl ) that consists of discrete complexes, in which the manganese cation is coordinated by two terminal thiocyanato anions and four 2-chloropyrazine ligands. In contrast, with 2-methylpyrazine only an aqua complex of composition Mn(NCS) 2 (2-methylpyrazine) 2 (H 2 O) 2 ( 1 - Mn/CH 3 ) is obtained that also consists of discrete octahedrally coordinated complexes. Moreover, a few single crystals of Mn(NCS) 2 (2-chloropyrazine) 4 · Mn(NCS) 2 (2-chloropyrazine) 2 (H 2 O) 2 · 2-chloropyrazine trisolvate ( 2 - Mn/Cl ) and Mn(NCS) 2 (2-methylpyrazine) 2 (H 2 O) 2 · Mn(NCS) 2 (H 2 O) 4 ( 2 - Mn/CH 3 ) were accidently obtained but no larger amounts are available. On heating, 1 - Mn/Cl and 1 - Mn/CH 3 transforms into new compounds of composition Mn(NCS) 2 (L) 2 (L = 2-chloropyrazine) ( 4 - Mn/Cl ) and 2-methylpyrazine ( 3 - Mn/CH 3 ). Surprisingly on further heating 1 - Mn/CH 3 looses additional 2-methylpyrazine ligands and transforms into a new compound of composition Mn(NCS) 2 (2-methylpyrazine) ( 4 - Mn/CH 3 ). Compound 4 - Mn/Cl is isotypic to its cobalt(II) analog and 4 - Mn/CH 3 is isotypic to Cd(NCS) 2 (2-methylpyrazine) reported recently and therefore, both structures were refined by the Rietveld method. The crystal structures of both compounds are strongly related. They consists of dimeric units, in which each two manganese cations are linked by pairs of μ-1,3-bridging thiocyanato anions, which are further connected into layers by single μ-1, 3-bridging anionic ligands. In contrast to 4 - Mn/Cl , in 4 - Mn/CH 3 these layers are further linked into a 3D coordination network by the 2-methylpyrazine ligands. Magnetic measurements reveal that 1 - Mn/Cl , 1 - Mn/CH 3 , and 3 - Mn/CH 3 shows only Curie- or Curie-Weiss paramagnetism, whereas 4 - Mn/Cl and 4 - Mn/CH 3 shows antiferromagnetic ordering at T N = 22.9 K and at 26.5 K. The results of these investigations are compared with those obtained for related compounds.

Description: . Black platelets of Bi 39.67(7) Ru 2 Br 35.0(2) were crystallized from a melt of Bi, BiBr 3 , and Ru. In the tetragonal crystal structure [ P 4/ mbm , a = 1311.92(6) pm, c = 3018.2(4) pm at 155(5) K], cluster cations [(Bi 8 2+ )Ru 2+ (Bi 8 2+ )] are embedded in a matrix of disordered bromido-bismuthate(III) groups. A thorough analysis of the disorder in the anionic part enabled the unambiguous assignment of the cluster charge. The η 4 -coordination of the two Bi 8 2+ square antiprisms to the Ru II atom in the sandwich complex resembles the bonding of Bi 5 + and Bi 8 2+ in the clusters [(Bi 5 + )Ru + (Bi 4 Br 4 )Ru + (Bi 5 + )] and [(Bi 8 2+ )Ru + (Bi 4 Br 4 )Ru + (Bi 5 + )] as well as of Bi 4 2– in 1 ∞ [(Bi 4 2– )Ru + (Bi 4 Br 4 )Ru + ]. By combining crystal chemical considerations for all mentioned compounds and using quantum chemical calculations, a common bonding scheme for the coordination compounds of bismuth polycations and polyanions was established. The η 4 -coordinating bismuth polycations and polyanions act as six electron donors, comparable to nido -carborane ligands, Zintl anions E 9 4– and E 5 6– ( E = Si to Pb), cyclopentadienyl ligands, or the cyclobutadiene dianion. The electron count for the transition metal is 18 in all finite clusters.

Description: Ce -doped BaTiO 3 -based ceramics were prepared and studied to satisfy ultra-broad temperature stability (from −55°C to 300°C, capacitance variation rate based on C 20°C is within ±15%). The sample with 0.6 mol% CeO 2 succeeds to achieve this performance with a remarkably high ceiling temperature of 300°C. Meanwhile, the sample has good dielectric and electrical properties at room temperature (ε r  = 1667, tanδ = 1.478%, ρ V  = 5.9 × 10 12  Ω·cm). Ce ion can substitute for Ti ion as Ce 4+ or Ba ion as Ce 3+ . The substitution decreases the spontaneous polarization of BaTiO 3 , and then weakens the ferroelectricity of BaTiO 3 . As a result, the temperature stability of samples is improved obviously. Besides, CeO 2 addition promotes the formation of exaggerated grains, which are consisting of Ba 6 Ti 17 O 40 .

Description: This study aims to optimize quantitative X-ray diffraction (XRD) mineralogical analysis of the minority phases in clinker. The proposed method consists of applying Rietveld quantitative refinement to the XRD patterns for both clinker and the insoluble residue remaining after it is attacked with methanol and salicylic acid (Takashima method). The method was tested with industrial clinker and the same material after modifying its mineralogy by refiring at 1500°C followed by slow cooling. The findings showed that the C 4 AF / C 3 A ratios for quickly and gradually cooled clinker were much higher when the clinker diffractograms were refined with the Rietveld procedure than when the proposed method was used. The proportion of C 3 A found with the proposed method was ≈2.8-fold higher than when Rietveld only was applied to the diffractograms for clinkers. Taken together, the refinement data for the two materials (clinker and Takashima residua) revealed that Rietveld quantitative XRD applied to clinker underestimates the low C 3 A content. These findings are supported by postsulfate attack durability studies conducted on cements prepared with the two clinkers.

Description: The effect of increasing poling fields on the properties of (1− x )BZT– x BCT compositions across the morphotropic phase boundary (MPB) is studied using large signal polarization and strain, small signal permittivity and piezoelectric coefficient, and XRD measurements. Successive poling causes charge carrier migration inducing an internal bias field, which becomes large with respect to the coercive field resulting in biased ferroelectric and ferroelastic switching. Improvements in piezoelectric coefficient of 9% are significantly smaller in the tetragonal 60BCT composition compared with the improvement of approximately 50% in the rhombohedral 40BCT and MPB 50BCT compositions. While the properties continue to change with increased poling fields, the remnant ferroelastic domain texture parallel to the field direction, as observed from XRD, stays approximately constant. The improvement in overall domain alignment leading to largely enhanced intrinsic piezoelectricity originates from the alignment of 180° domains and possibly non-180° domains in grains with orientations inclined to the electric field. As a result, poling is most effective in BZT–BCT materials that have low coercive fields, show low distortions and possess more polarization orientations, such as compositions in the rhombohedral phase field or near the MPB.

Description: The defect chemistry-modulated dielectric properties of dense yttria-doped zirconia ceramics prepared by conventional sintering (at 1350°C–1500°C) and electric field-assisted flash sintering (55 V/cm at 900°C) were studied by impedance spectroscopy. While the bulk dielectric properties from both sets of samples showed only small and insignificant changes in conductivity and permittivity, respectively, a huge increase of these properties was measured for the grain boundaries in the flash sintered specimens. A close analysis of these results suggests that flash sintering reduced grain-boundary thickness (by about 30%), while increasing the concentration of oxygen vacancies near these interfaces (by about 49%). The underlying mechanism proposed is electric field-assisted generation and accommodation of defects in the space-charge layers adjacent to the grain surface. The changes in measured permittivity are attributed to the boundary thickness effect on capacitance, while conductivity involved variations in its defect density-dependent intrinsic value, accounting for changes also observed in grain-boundary relaxation frequencies. Therefore, in terms of modifications to the specific dielectric properties of these materials, the overall consequence of flash sintering was to considerably lower the semi-blocking character of the grain boundaries.

Description: This article presents a detailed study on the nanoscaled interface between microelongated gold particles (GP) and biphase leucite/feldspar glass-ceramic matrix. The glass-ceramic composite with a nonuniform GP distribution was processed through hot-pressing under vacuum using a commercial dental ceramic furnace for glass-ceramic dental crown manufacturing. Heat treatments at 900°C, 1100°C, and 1300°C were conducted, and microstructural features along the interface were used to verify the chemical reactions between GP and glass-ceramic matrix. It was observed that the amorphous glass-ceramic matrix had nanoscaled biphase structures, and the distributed nanoscaled amorphous leucite phase was attracted to GP during hot-pressing, and was more reactive with GP than the feldspar phase. The thickness of the interfacial phase formed through chemical reactions between GP and glass-ceramic matrix is around 30 nm. The chemically bonded interface has contributed significantly toward the substantial improvements in both strength and toughness of the GP-reinforced glass-ceramic matrix composite. Characterization techniques, including X-ray diffraction and field-emission scanning electron Microscopy, incorporating X-ray microanalysis using energy dispersive spectrometry, have been employed in this study.

Description: . Previous attempts to synthesize and isolate (thiobisphenolate) vanadium(V) dioxido complexes had always provided their dimers containing [O=V(μ-O) 2 V=O] 2+ cores, and these also dominate the solution reactivity. Hence, the behavior of their parent monomers, which represent the major species in solution, has remained uncertain. Herein we report the development of a synthetic route that allowed for the successful isolation, spectroscopic investigation, and structural characterization of the monomer PPh 4 [ S LVO 2 ] ( 3 ) [ S L 2– = 2′2-thiobis(2, 4-di- tert -butylphenolate)]. For this purpose PPh 4 [ S LVOCl 2 ] ( 1 ) had to be accessed first in order to convert it to the ethoxido compound PPh 4 [ S LVO(OEt) 2 ] ( 2 ), which is more prone to hydrolysis. Treatment of 2 with stoichiometric amounts of water followed by immediate cooling to –30 °C led to crystals of 3 . After its dissolution NMR spectra were recorded that were identical with those obtained after dissolution of its dimer, thus confirming the monomer/dimer equilibrium postulated previously. The molecular structure of 3 revealed the absence of a V ··· S interaction, which, however, stabilizes its dimer, and thus suggested the employment of a bisphenolate ligand lacking a bridging sulfur atom to obtain an analogue, which does not undergo dimerization in solution. In Et L 2– the sulfur atom is replaced by an ethylmethine unit and indeed the corresponding complex NBu 4 [ Et LVO 2 ] ( 4 ) proved to be stable as a monomer. Investigation of its potential as a catalyst for the oxidative dehydrogenation of 9-fluorenol confirmed a much lower reactivity in comparison to dimeric complexes, which is discussed.

Description: Two complexes, cis -[MnL 2 (NCS) 2 ] ( 1 ) and cis -[ZnL 2 (NCS) 2 ] ( 2 ) with asymmetrical substituted triazole ligands [L = 3, 4-dimethyl-5-(2-pyridyl)-1, 2, 4-triazole], were synthesized and characterized by elemental analysis, UV/Vis and FT-IR spectroscopy as well as thermogravimetric analyses (TGA), powder XRD, and single-crystal X-ray diffraction. In the complexes, each L molecule adopts a chelating bidentate mode by the nitrogen atoms of pyridyl and triazole. Both complexes have a similar distorted octahedral [ M N 6 ] core ( M = Mn 2+ and Zn 2+ ) with two NCS – ions in the cis position.

Description: Recent investigations have revealed the great potential of Raman spectroscopy for the characterization of clinker minerals and commercial Portland cements. The usefulness of this technique for the identification of anhydrous, hydrated, and carbonated phases in cement-based materials has been demonstrated. In the present work, the application of micro-Raman spectroscopy for the characterization of the main clinker phases of calcium aluminate cements and calcium sulfoaluminate cement is explored. The main stable hydrated phases as well as several important carbonated phases are investigated. Raman measurements on the following phases are reported: (i) pure, unhydrated phases: CA, C 12 A 7 , CA 2 , C 2 AS, cubic- C 3 A , C 4 AF, and C 4 A 3 ; (ii) hydrated phases: ettringite, monosulfoaluminate, and hydrogarnet ( C 3 AH 6 ); (iii) carboaluminate phases: hemicarboaluminate and monocarboaluminate. The present results, which are discussed in terms of the internal vibrational modes of the aluminate, carbonate, and sulfate molecular groups as well as stretching O–H vibrations, show the ability of Raman spectroscopy to identify the main hydrated and unhydrated phases in the aluminate and sulfoaluminate cements. The Raman spectra obtained in this work provide an extended database to the existing data published in the literature.

Description: Acmite ( NaFeSi 2 O 6 ) films were formed on steel coupons via solvothermal reaction of silica, sodium hydroxide, and 1, 4-butanediol in an autoclave under autogenous pressure. Systematic variation in processing variables led to homogenous coatings comprised of pinacoidal acmite grains with an average grain size of ~33 μm. The coatings were produced on the steel coupons from reactant conditions of 0.635 m SiO 2 , 2.546 m NaOH , and 3.087 m 1,4-butanediol for 72 h at 240°C.

Description: . The multi-shaped amorphous alloy (Ni-B) powders were prepared by complexing reduction route using sodium borohydride (NaBH 4 ) as reductant with assistance of ultrasonic wave. The selected complexants, i.e. water, ammonia, salicylic acid, and ethylene diamine tetraacetic acid (EDTA) possess sequentially escalating complexation ability. The chemical composition and shapes of the product samples obtained under different conditions were characterized by X-ray powder differaction, selected area electron diffraction, and transmission electron microscope. The influence of reaction conditions such as the types of Ni-B, temperatures, NaBH 4 concentrations, and sodium hydroxide (NaOH) content on the hydrogen generation rate of hydrolysis of NaBH 4 solution were investigated in detail. The results show that the as-prepared Ni-B powders all belong to amorphous alloy with variable element contents, and the Ni-B sample prepared from EDTA complexation, possessing the best fineness and dispersity, has the strongest catalytic activity. The mean apparent activation energy of the hydrolysis reaction is 64.90 kJ · mol –1 . The NaBH 4 concentration has little impact on hydrogen generation rate, implying that the catalytic hydrolysis of NaBH 4 solution should be the pseudo zero-order reaction. Keeping the NaOH content at below 5 % could inhibit the hydrolysis of NaBH 4 solution, but the NaOH contents from 10 % to 15 % will significantly promote the hydrolysis rate of NaBH 4 . The hydrolysis reaction mechanisms, especially the effect of NaOH content on the hydrolysis reaction were also analyzed.

Description: A 50:50 vol% MgO – Y 2 O 3 nanocomposite with ~150 nm grain size was prepared in an attempt to make 3–5 μm infrared-transmitting windows with increased durability and thermal shock resistance. Flexure strength of the composite at 21°C is 679 MPa for 0.88 cm 2 under load. Hardness is consistent with that of the constituents with similar grain size. For 3-mm-thick material at 4.85 μm, the total scatter loss is 1.5%, forward scatter is 0.2%, and absorptance is 1.8%. Optical scatter below 2 μm is 100%. Variable intensity OH absorption (~6% absorptance) is observed near 3 μm. The refractive index is ~0.4% below the volume-fraction-weighted average of those of the constituents. Thermal expansion is equal to the volume-fraction-weighted average of expansion of the constituents. Specific heat capacity is equal to the mass-fraction-weighted average of heat capacities of the constituents. Thermal conductivity lies between those of the constituents up to 1200 K. Elastic constants lie between those of the constituents. The Hasselman mild thermal shock resistance parameter for the composite is twice as great as that of common 3–5 μm window materials, but half as great as that of c -plane sapphire.

Description: The intermetallic compounds Sr 2 Au 6.52 Zn 2.48 , Sr 2 Au 6 Zn 3 , and Sr 2 Au 6 Ga 3 were obtained by induction melting of the elements in sealed tantalum tubes. Their structures were studied by X-ray diffraction on powders and refined from single crystal diffraction data: R c , a = 844.5(2), c = 2187.7(5) pm, wR 2 = 0.0411, 936 F 2 values and 20 variables for Sr 2 Au 6.52 Zn 2.48 ; a = 841.6(2), c = 2191.5(7) pm, wR 2 = 0.0126, 587 F 2 values and 19 variables for Sr 2 Au 6 Zn 3 ; and a = 841.9(2), c = 2191.1(7) pm, wR 2 = 0.0199, 660 F 2 values and 19 variables for Sr 2 Au 6 Ga 3 . The gold substructures of Sr 2 Au 6 Zn 3 and Sr 2 Au 6 Ga 3 can be considered as diamond polytypes with 6R stacking sequences (287–304 pm Au–Au in Sr 2 Au 6 Zn 3 ). The cavities formed by this network are filled in an ordered manner by strontium atoms and Zn 3 (281 pm Zn–Zn), respectively Ga 3 (286 pm Ga–Ga) triangles in a 2:1 ratio. Consequently one can describe the Sr 2 Au 6 Zn 3 and Sr 2 Au 6 Ga 3 structures as ordered substitution variants of the Zintl phase CaIn 2 . This structural relationship is discussed on the basis of a group-subgroup Scheme. Sr 2 Au 6.52 Zn 2.48 shows Zn/Au mixing on the triangle.

Description: The templated borate, [C 9 H 14 N] · [B 5 O 6 (OH) 4 ], was synthesized under hydrothermal conditions. Single crystal X-ray diffraction techonology reveals that it crystallizes in the triclinic system, space group P (No. 2). The material was also characterized by element analysis, Fourier transform infrared spectroscopy (FTIR), powder X-ray diffraction (PXRD), thermogravimetric and differential thermal analysis (TG-DTA), and luminescence spectroscopy. The compound consisted of isolated pentaborate [B 5 O 6 (OH) 4 ] – and N -butylpyridinium cations [C 9 H 14 N] + . The [B 5 O 6 (OH) 4 ] – anions are connected together by hydrogen bonds to form a three-dimensional framework, in which [C 9 H 14 N] + cations are located in. [C 9 H 14 N] · [B 5 O 6 (OH) 4 ] exhibits tunable luminescence emission at 415–458 nm by means of heating treatment from 100 to 300 °C.

Description: Two alkylimido derivatives of hexamolybdate, (Bu 4 N) 2 [Mo 6 O 18 (≡N- o -COOCH 3 C 6 H 4 )] ( 1 ) and (Bu 4 N) 2 [Mo 6 O 18 (≡N- o -COOCH 2 CH 3 C 6 H 4 )] ( 2 ), were synthesized in high purity and good yields by the reaction of [(C 4 H 9 ) 4 N] 4 [α-Mo 8 O 26 ] and methyl anthranilate or ethyl- o -aminobenzoate hydrochloride with N , N ′-dicyclohexylcarbodiimide (DCC) as a dehydrating agent in dry acetonitrile solution, which were characterized by elemental analyses, IR, UV/Vis, and 1 H NMR spectroscopy as well as ESI-MS, and single-crystal X-ray diffraction study. Compound 1 crystallizes in the monoclinic space group P 2 1 / n with one-dimensional chain structure via intramolecular hydrogen bond. Compound 2 also crystallizes in the monoclinic space group P 2 1 / n with dimer structure by intramolecular hydrogen bonds and π–π interactions between the pairs of cluster anions.

Description: The cover picture shows the frontispieces of all articles published in this Special Issue with research reports from DFG priority program 1178 “Experimental Electron Density as Key to Understanding Chemical Interactions”, highlighting the diverse range of chemistry that is covered herein. Biological processes that determine the effects of drugs consist on a certain interaction between agent and receptor. This molecular recognition is influenced by the electron density distribution. Analysis of these processes enables the rational synthesis of drugs. Electron density measurements are moreover significant for the design of advanced materials with specific features, e.g. the development of new pigments. Thus, color, stability, and durability can be tuned by modifying the electron density. Selected substance classes used in chemical synthesis, drug design and material science were analyzed and their binding and recognition processes were studied and quantified by means of electron density measurements.

Description: In this work, novel Y 2 Si 2 O 7 / ZrO 2 composites were developed for structural and coating applications by taking advantage of their unique properties, such as good damage tolerance, tunable mechanical properties, and superior wear resistance. The γ- Y 2 Si 2 O 7 / ZrO 2 composites showed improved mechanical properties compared to the γ- Y 2 Si 2 O 7 matrix material, that is, the Young's modulus was enhanced from 155 to 188 GPa (121%) and the flexural strength from 135 to 254 MPa (181%); when the amount of ZrO 2 was increased from 0 to 50 vol%, the γ- Y 2 Si 2 O 7 / ZrO 2 composites also presented relatively high facture toughness (〉1.7 MPa·m 1/2 ), but this exhibited an inverse relationship with the ZrO 2 content. The composition–mechanical property–tribology relationships of the Y 2 Si 2 O 7 / ZrO 2 composites were elucidated. The wear resistance of the composites is not only influenced by the applied load, hardness, strength, toughness, and rigidity but also effectively depends on micromechanical stability properties of the microstructures. The easy growth of subcritical microcracks in Y 2 Si 2 O 7 grains and at grain boundaries significantly contributes to the macroscopic fracture toughness, but promotes the pull-out of individual grains, thus resulting in a lack of correlation between the wear rate and the macroscopic fracture toughness of the composites.

Description: . Reactions of the coordinatively unsaturated complexes [Fe 2 (μ-P R 2 )(μ-P R ′ 2 )(CO) 5 ] [ R = R ′ = t Bu ( 1 ); R = t Bu, R ′ = Cy ( 2 )] with nitric oxide in toluene at elevated temperatures were investigated. Thus, the new complexes [Fe 2 (μ-P t Bu 2 ) 2 (NO) 4 ] ( 3 ) and [Fe 2 (μ-P t Bu 2 )(μ-PCy 2 )(NO) 4 ] ( 4 ) were obtained in good yields. The molecular structure of 3 was confirmed by X-ray diffraction study. Compound 4 was also prepared from the coordinatively saturated species [Fe 2 (μ-P t Bu 2 )(μ-PCy 2 )(CO) 6 ] ( 2a ) with nitric oxide in refluxing toluene. Further closely related reactions at 60 °C with the complex 1 and [FeRu(μ-P t Bu 2 ) 2 (CO) 5 ] ( 5 ), respectively, were investigated using preliminary crystal structure determination results.

Description: The as-prepared BiFeO 3 ceramic shows a piezoelectric d 33 coefficient of −14 pC/N, that is, an obvious ferroelectric self-poling phenomenon. The temperature gradient between the two surfaces of BiFeO 3 ceramic was intentionally enlarged when BiFeO 3 was prepared with a rapid liquid sintering method. This temperature gradient and the corresponding thermal strain can introduce defect dipoles through separating bismuth vacancies from oxygen vacancies. A mass of these dipoles introduce a macroscopic internal electric field ( E in ) which downward poles BiFeO 3 ceramic during its cooling down process. As expected, an E in of 〉10 kV/cm is confirmed by the asymmetrical polarization/strain versus electric field curves.

Description: The effect of Ba content on the stress sensitivity of the antiferroelectric to ferroelectric phase transition in ( Pb 0.94− x La 0.04 Ba x )[( Zr 0.60 Sn 0.40 ) 0.84 Ti 0.16 ] O 3 ceramics is investigated through monitoring electric field-induced polarization and longitudinal strain under compressive prestresses. It is found that incorporation of Ba significantly suppresses the stress sensitivity of the phase transition, as manifested by slight decreases under prestresses up to 100 MPa in the maximum polarization ( P m ) and longitudinal strain ( x m ). The energy storage density is even increased under the mechanical confinement in compositions x  = 0.02 and 0.04. X-ray diffraction, transmission electron microscopy, and dielectric measurements indicate that the suppressed stress sensitivity is associated with the disruption of micrometersized antiferroelectric domains into nanodomains and the transition from antiferroelectric to relaxor behavior.

Description: Powders and nanoceramics composed of composites of CoFe 2 O 4 , CoFe 2 , and a small amount of FeO were prepared by heating CoFe 2 O 4 powder in reducing atmosphere and by sintering the product of reducing reaction at 350°C via spark plasma sintering technology. In the powders, increase in the molar ratios of CoFe 2 : CoFe 2 O 4 and a great change in magnetic parameters were observed with the change in heating temperature from 300°C to 400°C, and the dominance of dipole interaction over exchange coupling in the interparticle interactions was confirmed by the steps in magnetic hysteresis loops and the negative Henkel plots. However, in the nanoceramics, significant enhancement in exchange coupling was found when the sintering temperature was raised to 500°C and 650°C, which was confirmed by both the positivity of Henkel plot and the single-phase style of the magnetic hysteresis loop.

Description: Gas adsorption porosity measurement of geopolymers (GPs) is required for quantitative understanding of such mesoporous structures, but the complex nature of the GP system makes analysis difficult. Previous results in the literature are often ambiguous or contradictory. A systematic investigation of metakaolin GP gas adsorption results was conducted to optimize the use of this measurement technique and verify that results match known theory about GP structure. It was found that GP undergoes structural change upon degassing at 100°C or higher. If and only if this change is prevented by degassing at a lower temperature could it be shown that specific surface area and total gas adsorption increases with both increasing curing temperature and decreased Si : Al ratio. This observation is consistent with previous suggestions of increased zeolitic character under these conditions, where previous gas adsorption investigations had not observed this expected relationship. Hydrogen physisorption is proposed as a substitute technique for micropore isotherms in GPs due to the difficulty of removing trace gasses from GPs and the measurement effect of such gasses at high vacuum. A hydrogen physisorption isotherm qualitatively resembled an equivalent nitrogen micropore isotherm.

Description: Two new materials of the composition ({CH 3 (CH 2 ) 15 (CH 3 ) 2 S} + ) 2 [CoBr 4 ] 2– ( 1 ) and ({CH 3 (CH 2 ) 15 (CH 3 ) 2 S} + ) 2 [CuBr 4 ] 2– ( 2 and 3 ), of which the latter exists in two polymorphs, were synthesized. The materials display the synthetically targeted structures, comprising of layers of complex metal ions and layers of long-chain sulfonium cations. The crystal structures of the materials were determined. The interlayer distances are around 24 Å, with metal–metal distances about 8 Å. The magnetic properties of 1 were investigated, and the material is paramagnetic. ({CH 3 (CH 2 ) 15 (CH 3 ) 2 S} + ) 2 [CuBr 4 ] 2 is polymorphic. Both polymorphs crystallize with triclinic symmetry.

Description: In this work, the role of europium doping of glasses formulated in the ternary system ZnO – CdO – TeO 2 is described. The Eu -doped oxide glasses were prepared by the conventional melt-quenching method and by using three different compositions. Structural studies reveal that there exists a good affinity between Cd and some rare earth (RE) ions to form the crystalline phase. The X-ray diffraction (XRD) diagrams display that the structure of these glasses is amorphous and with the increase in CdO content and the compatibility of Eu 3+ , there is a tendency to form nanocrystals of CdTe 2 O 5 . The scanning electron microscopic (SEM) observation of their microstructure confirms the presence of phase separation. Differential thermal analysis (DTA) of these glasses showed small exothermic peaks noted around 450°C for the V2 glass and 480°C for V1 and V3 glasses, which could be attributed to the formation of these crystals. The infrared spectra showed a main absorption band around 800–600 cm −1 corresponding to the Te – O stretching mode in TeO 4 and TeO 3 groups. By optical absorption (OA), the band gap ( E g ) for each glass was determined; these values were 3.27, 3.14, and 3.3 eV for the V1–V3 glasses, respectively. Furthermore, the presence of Eu 3+ was detected in the 370–470 nm short-range wavelengths. The photoluminescence (PL) experiments of the glasses showed light emission due to the following transitions: 5D0 → 7F1, 5D0 → 7F2, 5D0 → 7F3, and 5D0 → 7F4.

Description: The conductivity of nominal CaWO 4 , CaW 0.99 Ta 0.01 O 4–δ , 0.7( CaWO 4 )–0.3( La 0.99 Ca 0.01 NbO 4–δ ), and Ca 0.9 La 0.1 WO 4+δ has been studied by means of a.c. impedance measurements. Proton conductivity was observed for CaW 0.99 Ta 0.01 O 4–δ , which displayed exothermic hydration with enthalpy and entropy of –82 kJ/mol and –120 J/molK, respectively. The proton mobility in CaW 0.99 Ta 0.01 O 4–δ was low, with enthalpy and preexponential factor of mobility of 82 kJ/mol and 0.7 cm 2 K/Vs. The high enthalpy of mobility is interpreted to reflect association between the acceptor dopant and protonic defects, whereas the low preexponential factor of mobility may reflect a lower proton concentration than assumed. Rietveld refinement indicated low solubilities of La on Ca -site and Ta on W-site. Proton conductivity was also observed in undoped CaWO 4 , however, not in Ca 0.9 La 0.1 WO 4+δ . The conductivity of 0.7( CaWO 4 )–0.3( La 0.99 Ca 0.01 NbO 4–δ ) behaved much like that of undoped LaNbO 4 , likely due to a very low acceptor dopant concentration.

Description: A new lead-free BNT-based piezoelectric ceramics of (1 −  x ) Bi 0.5 Na 0.5 TiO 3 – x Bi ( Al 0.5 Ga 0.5 ) O 3 ( x  = 0, 0.02, 0.03, 0.04, and 0.05) were synthesized using a conventional ceramic fabrication method. Their structures and electrical properties were investigated. All the samples show a typical ferroelectric P ( E ) loops and S ( E ) curves at room temperature. The optimal properties are obtained at the composition of the x  = 0.03. The substitution of Bi ( Al 0.5 Ga 0.5 ) O 3 enhances piezoelectric constant and increases Curie temperature from 58 pC/N and 310°C of pure BNT to 93 pC/N and 325°C of the x  = 0.03. The temperature-dependent P ( E ) loops and S ( E ) curves of 0.97BNT–0.03BAG indicate that phase transition from ferroelectric to antiferroelectric takes place over a very wide temperature region from 80°C to 180°C. The results show that the introduction of BAG improves the electrical properties of BNT.

Description: Single crystals of Rb 2 H 2 P 2 O 6 · 2H 2 O could be obtained from aqueous solutions of hypodiphosphoric acid and rubidium carbonate. Its crystal structure was determined by X-ray diffraction and it crystallizes in the monoclinic space group P 2 1 / c with Z = 4. The salt-like title compound consists of [H 2 P 2 O 6 ] 2– units in staggered P 2 O 6 -skeleton conformation, Rb + cations, and H 2 O molecules, held together by intermolecular hydrogen bonds of the type O ··· O. The vibrational spectra (IR/FIR and Raman) of the rubidium salt were recorded and an assignment of the vibrational modes is proposed based on the point group C 2 h for the P 2 O 6 -skeleton of the anion. The thermal behavior of Rb 2 H 2 P 2 O 6 · 2H 2 O is dominated by a complex TG decay indicating a simultaneous H 2 O delivery coupled with a disproportionation of [H 2 P 2 O 6 ] 2– , what is also supported by Raman spectra of heated samples.

Description: Three metal coordination polymers {[Co(L) 2 (H 2 O) 2 ] 2+ · 2NO 3 – } n ( 1 ), {[Mn(L) 2 (H 2 O) 2 ] 2+ · 2Cl – · 3H 2 O} n ( 2 ), and [ZnL(ba) 2 ] n ( 3 ) [L = 3, 5-bis(imidazole-1-yl)pyridine and Hba = benzoic acid] were synthesized and structurally characterized by IR spectroscopy, elemental analysis, X-ray powder diffraction, and X-ray single crystal diffraction. Complex 1 shows a one-dimensional (1D) chain structure. Adjacent chains are connected by hydrogen bonding and nitrate groups to form a 3D network. Complex 2 features a 2D layer structure. A three-dimensional network is constructed through the cluster consisting of two chloride ions and three water molecules. Complex 3 shows a 1D zigzag chain structure that further twists together to form a 3D network. The X-ray powder diffraction patterns were compared with the simulated ones. Moreover, the luminescent properties of 1 – 3 were investigated in the solid state at room temperature, and the thermogravimetric analyses were carried out to study the thermal stability of the three complexes.

Description: . The reactions of FeCl 3 · 6H 2 O and 2-(2′-hydroxyphenyl)-2-thiazoline as a bidentate O-N donor thiazoline ligand (thoz) afford a five-coordinate Fe III complex [Fe(thoz) 2 Cl] with a distorted square pyramidal configuration. Complex [Fe(thoz) 2 Cl] was isolated as air-stable crystalline solids and fully characterized, including by single-crystal X-ray structure analysis. Complex [Fe(thoz) 2 Cl] shows very efficient reactivity in the oxidation of sulfides to their corresponding sulfoxides using urea hydrogen peroxide (UHP) as the oxidant at room temperature in air.

Description: Two copper(I) complexes of compositions [Cu(HL)I] 2 · EtOH ( 1 ) and [Cu(HL) 3 ]I · MeOH ( 2 ) were synthesized via the reactions of HL [HL = 2(4, 5-diphenyl-1 H -imidazol-2-yl)pyridine] and CuI in EtOH and MeOH, respectively, under solvothermal conditions. The complexes were characterized by X-ray single crystal diffraction, IR spectroscopy, and elemental analysis. Compounds 1 and 2 are catalytically active towards ketalization reaction, giving various ketals under mild conditions.

Description: Mineral samples from the Prasolovskoe epithermal Au-Ag deposit, Russia, were investigated via transmission electron microscopy (TEM). One component was identified as the mineral kurilite Ag 8 Te 3 Se according to the data obtained from electron diffraction (ED) and Fourier transform analyses of high resolution micrographs. Micrometer-sized grains of kurilite were found next to other noble metal chalcogenide domains like the hessite-type. The EDX microprobe analyses of the kurilite domains were determined with the chemical composition Ag 7.9 Au 0.1 Te 2.9 Se 1.0 which is consistent with kurilite doped by gold. Additionally noble metal polychalcogenidehalides (NMPH) were identified via ED. Monoclinic and tetragonal polymorphs of Ag 5 Te 2 Cl were observed for the first time in a mineral sample. One additional component, whose composition equates the kurilite-type component with regard to Ag, Au, Te, and Se but with a marginal chlorine component, crystallizes in a structure type known from synthetic NMPH, namely Ag 23 Te 12 X (X = Cl, Br). This phase as well as the phases Ag 10 Te 4 Br 3 and Ag 20 Te 10 Br 2 was found next to each other in an also investigated synthetic sample.

Description: We studied ancient enamels on gilded copper from a collection of archeological horse harness pendants of the Museo Instituto Valencia de Don Juan (Madrid, Spain) to test the benefits of a new, nondestructive analytical methodology based on chemometric analysis (i.e., Principal Component Analysis, PCA) on micro-ATR-FTIR spectral data and chemical quantification using SEM-EDS. The novelty of this approach was threefold: (i) PCA allowed the discrimination of the different harness pendants of known origin and attributed to the 14th and 15th centuries according to the chemical complex composition, nanostructure, glass weathering, and/or coloring mechanisms of each colored enamel, separately (i.e., red, purple, blue, and white), (ii) it is a cheap, easily available and nondestructive methodology that enables us to (iii) draw archeological conclusions about the quality of the manufacturing process, reassess the chronology of these objects and attempt to attribute them to different workshops according to the different traditional recipes identified. In particular, the enamels were made of alkali and/or alkaline earth lead-glass with a wide range of chemical compounds in the form of pigments or opacifiers. Two types of coloring mechanisms were identified, colloidal particles such as copper-ruby for red enamels, and ionic mechanisms such as Fe (II) and Co (II) to achieve a blue pigments; Mn (III) in the purple pigment; and two kind of white enamels were identified, i.e., tin oxide as an opacifier and uranium oxide. In addition, we established the reason for the poor state of conservation of some of the enamels by means of the identification of depolymerization and ion exchanges, well-known harmful effects of glass weathering, and finally a chronology was assigned for some of these pieces according to the enamel composition.

Description: Novel glass-ceramics with embedded thermoelectric Bi 2 Se 3 crystals were prepared from glass matrices in the Ge 20 Se 100− x Bi x ( x  = 5, 10, 12 mol%) system. Based on DSC results performed at different heating rates, characteristic activation energies ( E c ) and Avrami exponents ( n ) were obtained and analyzed by using Kissinger's relation, Ozawa's method, Augis–Bennett approximation and Matusita–Sakka theory. XRD results showed that pure Bi 2 Se 3 crystalline phase precipitated upon annealing at different temperatures for various time. The crystal size and crystalline fraction in the samples could be tuned by controlling the annealing time.

Description: In the present investigations nano size high alumina cements (HAC) were prepared by very effective co-melt precursor sintering technique from their metal nitrate precursors. The prime cementing phases observed were CA, CA 2 , and C 12 A 7 . The addition of nano structured cements in refractory castables has improved the thermo-chemical-mechanical properties to a significant extent. Each batch of low cement castables (LCC) was prepared from calcined Chinese bauxite, HAC, and superfine additives. The effect of HAC in bauxite castable with the additives similar to Silicon Carbide, reactive alumina, and micro-fine silica on the sinterability and properties of these castables was investigated. Physical properties such as apparent porosity and bulk density, mechanical properties such as hot modulus of rupture (HMOR), cold and hot modulus of rupture (CMOR), and cold crushing strength (CCS) of hydrated and sintered castables were studied. The sintered castables were also characterized for their solid phase compositions and microstructure using X-ray diffraction (XRD) and FE-SEM, respectively. In the castables new phases such as mullite, α-alumina were formed at the expense of bauxite and silica. Solid solution of mullite formed at high temperature acts as a bonding phase and is accounted for high HMOR, CMOR, and CCS values. These excellent properties of such castables may enable their uses in various applications such as refractory lining for fabrication of steel, aluminium, copper, glass, cement, chemicals, and ceramics.

Description: Eight chelating resins were synthesized in high yields by supporting 2-aminomethylpyridine, 2, 2′-dipyridylamine, 1, 2-phenylenediamine and 1, 2-ethylenediamine on Merrifield and Wang resins, respectively. These resins were used both as support of reducing complexes and as alkali metal sensors. 16 stable and easy to prepare reducing complexes, derived from the chelating resins and LiBH 4 and NaBH 4 , were prepared in good yields. These complexes showed chemoselectivity to reduce aldehydes in a low molar ratio and short time reactions. The fluorescence-sensing behavior of the chelating resins for alkali metal was studied. The fluorescence response of the materials where 1, 2-phenylenediamine is supported on Merrifield and Wang resins indicate that they behave as sensors for Li + and K + , respectively.

Description: The reaction of Fe 3 (CO) 12 with (C 3 H 5 ) 2 NCS 2 K in THF at room temperature afforded a red-brown solution. Treatment of the thus-obtained solution with MeI and PhCH 2 Br afforded clusters 1 , (μ-MeS)Fe 2 (CO) 6 (μ 4 -S)Fe 2 (CO) 6 (μ-CN(C 3 H 5 ) 2 ), and 2 , (μ-PhCH 2 CO)Fe 2 (CO) 6 (μ 4 -S)Fe 2 (CO) 6 (μ-CN(C 3 H 5 ) 2 ). Their structures were unambiguously determined by X-ray crystallography. Therefore, this methodology provides a novel route for the syntheses of spiro-S Fe/S clusters with aminocarbyne ligands.

Description: This study presents the preparation of 5-azido-3-nitro-1 H -1,2,4-triazole ( 1 ) in both good yield and high purity, starting from commercially available chemicals in a three step synthesis. Furthermore, several metal and nitrogen-rich salts with sodium ( 3 ), potassium ( 4 ), cesium ( 5 ), silver ( 6 ), lead ( 7 ), ammonium ( 8 ), guanidinium ( 9 ), and aminoguanidinium ( 10 ) were prepared by simple acid-base reactions. All compounds were well characterized by various means, including vibrational (IR, Raman) and multinuclear ( 1 H, 13 C, 14 N, 15 N) NMR spectroscopy, mass spectrometry, and DSC. Additionally the structure of 7 was determined by single-crystal X-ray diffraction. The sensitivities towards various outer stimuli (impact, friction, electrostatic discharge) were determined according to BAM standards. The metal salts were tested as potential primary explosives utilizing various preliminary tests.

Description: With Sharpless' and Meldal's discovery of the immensely supportive effect that metal catalysis has on Huisgen's classical 1,3-dipolar cycloaddition, azides (RN 3 ) – long underappreciated in organic synthesis – suddenly got in the focus of attention as most crucial players in sensational ‘click chemistry'. Less noisy though with the same commitment and even a much broader scope of scientific topics and objectives, the inorganic azide chemistry has made just as great strides in the last few decades. This review (Part I) gives an introductory survey of the most important results, and informs about modern developments and general trends. Particular emphasis is placed on the recent successful approaches to highly unstable homoleptic azido metal complexes of the main group and early transition elements, as well as on the enormous structural versatility caused by the ‘flexidentate' N 3 – ligand with its unsurpassed bridging capacities. The presentation in this paper of selected compounds and reactions is meant, in a way, as a prelude to the [3+2]-cycloadditions of metal azides and related species which will be covered in-depths in Part II. A large part of the comments finally deals with applications in fields such as catalysis, high explosive performance or magnetism of metal compounds containing azide, today certainly one of the most attractive research areas world-wide.

Description: The long-chain ligand, 1-phenyl-3-methyl-4-heptanoyl-pyrazol-5-one (HL) and its zinc(II) complex ZnL 2 were synthesized. The structure and the properties of ZnL 2 were characterized by elemental analysis, IR spectroscopy, X-ray diffraction, and thermogravimetric analysis. The zinc ion is five-coordinated in a square-pyramidal environment by four oxygen atoms of the HL ligands in the equatorial plane and one water molecule in the axial position. The water molecule is directly bonded to Zn 2+ and involved in intermolecular hydrogen bonding network. The complex and its corresponding ligand were screened in vitro against some strains of the human pathogenic bacteria. The metal complex exhibits higher antibacterial activity than its corresponding ligand. The complex exhibits purple effect emission as the result of fluorescence from the intraligand emission excited state.

Description: The microporous metal-organic framework Cd 2 (ABTC)(H 2 O)(DMA) 2 · H 2 O · 3DMA ( 1 ) (H 4 ABTC = 3,3′,5,5′-azobenzenetetracarboxylic acid; DMA = N , N ′-dimethylacetamide) was prepared by solvothermal reaction and characterized. X-ray structure analysis revealed that compound 1 is a three-dimensional (3D) open framework with 2D channels. The topology is based on a PtS net, constructed of 4-connected rectangular ABTC 4– units with 4-connected tetrahedral dinuclear Cd 2 (CO 2 ) 4 (H 2 O)(DMA) 2 secondary building units (SBUs). The solid-state excitation-emission spectra showed that the strongest emission peak is at 403 nm upon excitation at λ = 287 nm.

Description: P(2-SHC 6 H 4 ) 3 ( PS 3 H 3 ) reacts with GaMe 3 (1:1) to give GaMe{P(2-SC 6 H 4 ) 2 (2-SHC 6 H 4 )-κ 3 S , S′,P } ( 1 ), which could be deprotonated with NEt 3 to give [NEt 3 H][GaMe{P(2-SC 6 H 4 ) 3 -κ 3 S , S′,P }] ( 2 ). The 1:2 reaction of E (2-SHC 6 H 4 ) 3 [ E = P ( PS 3 H 3 ), As ( AsS 3 H 3 )] with GaMe 3 gave the dinuclear complexes GaMe{ E (2-SC 6 H 4 ) 2 (2-S{GaMe 2 (THF)}C 6 H 4 )-κ 3 S , S′,E } [ E = P ( 3 ), As ( 4 )]. Serendipitous hydrolysis of 4 resulted in small amounts of the hexanuclear gallium hydroxide complex cyclo -{GaMe(μ-OH)} 6 {As(2-SC 6 H 4 ) 3 -κ S , S′,S′′ } 2 ( 5 ). Complexes 1 – 4 were fully characterized, complexes 2 – 5 also by X-ray crystallography.

Description: Topological aspects of the experimental electron density in TiB 2 reconstructed on base of the multipole model are obtained from high-resolution single-crystal X-ray diffraction data. The features of electron density are compared with quantum chemical calculations and analysed in terms of Quantum Theory of Atoms in Molecules for the interpretation of atomic interactions. In spite of some differences in the Laplacian, both experimental and calculated density confirmed two main bonding interactions. The B–B bond critical point suggests a shared-type interaction with pronounced ellipticity in the boron layer, whereas B–Ti bond critical point reveals an interaction intermediate between shared and closed-shell type. Both, theory and experiment indicate a non-structured spherical topology in the penultimate shell of Ti. Integration of the electron density over the atomic basins reveals a charge transfer of 1.1 e (experiment) and 1.4 e (theory) from titanium to boron network, respectively.

Description: The stannides Li 2 CuSn 2 and Li 2 AgSn 2 were synthesized by induction-melting (or in a muffle furnace) of the elements in sealed niobium ampoules. The new phases were characterized by powder X-ray diffraction. The structures of both stannides were investigated by X-ray diffraction on single crystals: Li 2 AuSn 2 type, I 4 1 / amd , a = 442.6(1), c = 1940.9(8) pm, wR 2 = 0.0742, 310 F 2 values for Li 2 CuSn 2 and a = 456.33(9) c = 2018.2(6) pm, wR 2 = 0.0626, 339 F 2 values for Li 2 AgSn 2 with 10 variables for each refinement. The transition metal ( T ) atoms have tetrahedral tin coordination. The T Sn 4 tetrahedra are condensed via common corners forming layers that are further condensed by Sn–Sn bonding, leading to three-dimensional [CuSn 2 ] and [AgSn 2 ] networks which leave distorted hexagonal channels for the lithium atoms. The lithium ions show considerable mobility, with activation energies of 0.29 and 0.47 eV extracted from variable temperature 7 Li solid state NMR spectra. 119 Sn Mössbauer spectra at 78 K show signals at isomer shifts of δ = 2.13(1) mm s –1 for Li 2 CuSn 2 and δ = 2.07(1) mm s –1 for Li 2 AgSn 2 . The signals show electric quadrupolar splitting because of the non spherical environment of the tin nuclei. A minor impurity of β-Sn could be identified in both spectra.

Description: The complexes [Ni 2 (L) 2 ] 2 · H 2 O ( 1 ) and [Cu 2 (L) 2 (H 2 O)] · 2CH 3 OH ( 2 ) were prepared by reaction of the chiral Schiff base ligand N -[(1 R ,2 S )-2-hydroxy-1, 2-diphenyl]-acetylacetonimine (H 2 L) with Ni II and Cu II ions, respectively, aiming to develop economically and environmentally-friendly catalysts for the hydrogenation of ketones. They have a dinuclear skeleton with axial vacant sites. The catalytic effects of the two complexes for hydrogenation of ketones were tested using dihydrogen gas as hydrogen source. They present some catalytic effects in hydrogenation of acetophenone, which has a dependence on the temperature and base used in these reactions. However, no apparent catalytic effects were found for the two complexes in hydrogenation of 4-nitroacetophenone and 4-methylacetophenone. Although the catalytic conversion in these hydrogenation reactions is low, they do represent a kind of cheap and environmentally-friendly hydrogenation catalyst.

Description: Poised to investigate the association of vanadium with physiological substrates in materials capable of exerting anticancer biological activity, pH-specific synthetic chemical reactivity between vanadium and triethyl ammonium acetate/trigonelline in aqueous and mixed organic-aqueous media led to the isolation of three new binary composite materials, namely K 2 [(MeN(+)C 5 H 4 COOH) 2 ][V 10 O 28 H 2 ] · 2H 2 O ( 1 ), [(H 2 N(+)Me 2 ) 4 ][V 10 O 28 H 2 ][Me 3 N(+)CH 2 COO(–)] 2 ( 2 ), and [(Me 3 N(+)CH 2 COOH) 4 ][V 10 O 28 H 2 ][Me 3 N(+)CH 2 COO(–)] 2 · 2H 2 O ( 3 ). 1–3 were characterized by elemental analysis, FT-IR and UV/Vis spectroscopy, Cyclic voltammetry, TGA-DTG, and X-ray crystallography. In all three compounds, the [V 10 O 28 H 2 ] 4– core unit is a common cluster assembly, with the vanadium in the +5 oxidation state. The counteracting cationic assembly in each composite material originates in the betaine starting reagent or the solvent out of which the materials crystallized. Biological activity studies of 1 and 3 in vitro in MCF-7 breast epithelial and A549 lung adenocarcinoma cell cultures show that both materials inhibit the viability of both cell lines in a dose-dependent fashion, in juxtaposition to the behavior of the betaine components present in these materials. Collectively, the herein studies a) reveal the uniquely defined synthetic methodologies and physicochemical properties of the variably assembled [V 10 O 28 H 2 ] 4– core units crystallized into the composite binary polyoxovanadate-betaine lattice structures, b) unravel the distinct cytotoxicity profile of the composite materials toward MCF-7 and A549 cells, and c) attest to their future potential as metallodrugs of pharmacological significance in anticancer activity.

Description: Zn 2 GeO 4 ceramic materials were synthesized by the solid-state method. Zn 2 GeO 4 powders were investigated with X-ray powder diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM). Oxygen defects in the Zn 2 GeO 4 ceramics were investigated by photoluminescence, Raman, and EDS spectra. Conductivity of Zn 2 GeO 4 was 0.18 S/cm at low temperature of 773 K, and its activation energy was 0.49 eV. The results showed that Zn 2 GeO 4 was a promising low-temperature electrolyte with high conductivity.

Description: This article details the influence of zirconium doping on the piezoelectric properties and relaxor characteristics of 94( Bi 1/2 Na 1/2 ) TiO 3 –6 Ba ( Zr x Ti 1− x ) O 3 (BNT–6BZT) bulk ceramics. Neutron diffraction measurements of BNT–6BZT doped with 0%–15% Zr revealed an electric-field-induced transition of the average crystal structure from pseudo-cubic to rhombohedral/tetragonal symmetries across the entire compositional range. The addition of Zr up to 10% stabilizes this transition, resulting in saturated polarization hysteresis loops with a maximum polarization of 40 μC/cm 2 at 5.5 kV/mm, while corresponding strain hysteresis measurements yield a maximum strain of 0.3%. With further Zr addition, the ferroelectric order is progressively destabilized and typical relaxor characteristics such as double peaks in the current density loops are observed. In the strain hysteresis, this destabilization leads to an increase of the maximum strain by 0.05%. These changes to the physical behavior caused by Zr addition are consistent with a reduction of the transition temperature T F-R , above which the field-induced transformation from the relaxor to ferroelectric state becomes reversible.

Description: Precursor glasses for the ferroelectric barium bismuth titanate ( BaBi 4 Ti 4 O 15 ) (BBiT) have been prepared by the melt-quench technique in the SiO 2 – K 2 O – BaO – Bi 2 O 3 – TiO 2 (SKBBT) glass system with and without Eu 2 O 3 doping. BBiT glass–ceramic (GC) nanocomposites have been derived from these glasses by controlled heat treatment. The structural properties of the GCs have been investigated using X-ray diffraction (XRD), electron microscopy (FE-SEM, TEM), and FT-IR reflectance spectroscopy. FE-SEM images show the formation of randomly oriented hexagonal rod-shaped crystals of 200–400 nm and TEM images show 10–20 nm crystallites. FT-IR spectra exhibit the characteristic bands of BBiT at 480, 585, and 680 cm −1 . The activation energy of crystallization ( E c ) varies from 295 to 307 kJ/mol. The dielectric constants (ε r ) of glass and GC nanocomposites increase with an increase in frequency up to 3.0 MHz and then decrease up to 5.0 MHz. Heat-treated GCs show higher ε r values, in the range 25–55, compared to the precursor glasses (20–37). Dielectric losses (tan δ) for all the samples increase from 0.005 to 1.0 with an increase in frequency from 100 Hz to 5.0 MHz. Excitation spectra were recorded by monitoring emission at 613 nm corresponding to the 5 D 0 → 7 F 2 transition. An intense 466 nm excitation band corresponding to the 7 F 0 → 5 D 2 transition was observed. Emission spectra were then recorded by exciting the glass samples at 466 nm. Longer heat-treatment times led to a 15-fold increase in the intensity of the red emission at 612 nm, attributed to the segregation of Eu 3+ ions into the low phonon energy BBiT crystallites. The hardness (3.8–5.1 GPa) and fracture toughness (1.8–3.5 MPam 0.5 ) values obtained in the GCs are high and suitable for structural applications.

Description: Carbon doping is known to be very effective for enhancing the high-field properties of magnesium diboride, MgB 2 , but not for the low-field properties. Here, we report that both the high- and the low-field properties can be improved simultaneously without doping by increasing the initial magnesium partial pressure, by simply reducing the size of the magnesium particles. It is shown that in situ processed bulk MgB 2 sintered with fine magnesium powders has superior superconducting properties compared with a bulk sample fabricated using coarse magnesium lumps. The change in the lattice parameters was almost negligible; however, a clear increase in lattice strain can be observed for the sample sintered with fine magnesium powders. The increase in the lattice strain results in an enhancement of the high-field properties. Furthermore, it has also been found that the low-field critical current density is not reduced, but rather slightly increased for the fine magnesium powder sample. This is due to a closer linkage among the grains that drastically improves grain connectivity. These findings demonstrate that the initial growth mechanism of MgB 2 is very crucial for its superior superconducting properties, and it especially indicates the importance of magnesium vapor pressure.

Description: Revisiting classic phase diagrams and chemical phase relations in the solid state of a very well-studied oxide system, such as the lithium aluminosilicate (LAS) system, can open a new window for the design of new advanced materials with improved properties. Crystal chemistry and phase equilibria are used to demonstrate the ability to design materials with particular desired properties in the alumina-rich corner of the LAS phase diagram. The experimental results demonstrate the alumina and β-eucryptite solid-state compatibility.

Description: This work reports the crystallization, microstructure, and surface composition of Cu In 0.7 Ga 0.3 Se 2 (CIGS) thin films grown by femtosecond pulsed laser deposition at different annealing temperatures. The structural and optical properties of the CIGS films were characterized by X-ray diffraction, Raman scattering, UV-visible spectroscopy, and Hall effect measurement. The results indicate that binary crystals of CuS e initially formed on the as-deposited film, but then completely turned into a quaternary chalcopyrite structure after annealing at 400°C. Phase transformation significantly affects the surface morphology, Hall properties, and band gap. Transmission electron microscopy further revealed that an interface between the Mo substrate and CIGS crystallites contains an amorphous layer even at the high temperature of 500°C. For the application of photovoltaic devices, we also report on the photoresponse of both as-deposited and annealed films as demonstrated by preliminary tests.

Description: Reactive sintering of 3 Ti : Sn :2 C and 3Ti:Sn:2C:0.6Fe powder mixtures is studied in the temperature range 510°C–1200°C under argon. It is demonstrated that the recently discovered Ti 3 SnC 2 phase is formed, provided that Fe is added to a 3 Ti : Sn :2 C reactant mixture within the synthesis conditions used. Using dilatometric and X-Ray diffraction analyses, the formation mechanism of Ti 3 SnC 2 is discussed. Results show that at low temperature (about 510°C), tin is consumed to form Fe x Sn y intermetallics. At high temperature (about 1060°C), tin is newly available to form Ti 3 SnC 2 due to the melting of Fe x Sn y . Then, the intermediate phases, TiC and Ti 2 SnC , and/or Ti 5 Sn 3 , TiC , C , and Ti are dissolved in the ( Fe  +  Sn ) liquid phase and Ti 3 SnC 2 very likely precipitate from the melt. The second part of the study deals with the optimization of the Fe content in the initial 3Ti:Sn:2C reactant powder mixture to synthesize samples with larger Ti 3 SnC 2 content by hot isostatic pressing.

Description: The effects of non-stoichiometry on the microstructure, oxygen vacancies, and piezoelectric properties of ( Na 0.5 K 0.5 ) x NbO 3 (NK x N, where x  =   0.98, 1.00, 1.01, and 1.02) ceramics doped with sintering aid CuTa 2 O 6 (CT) doping were investigated. X-ray diffraction (XRD) patterns indicated that a secondary phase formed in CT-doped NK x N (NK x NCT) ceramics with x  〈   1.00 and that a pure phase was obtained with x  ≥   1.00. The grain size of NK x NCT ceramics increased with increasing x value due to the formation of a liquid phase. The internal bias field, activation energy, and Raman analysis for NK x NCT ceramics showed that the number of induced oxygen vacancies increased with decreasing x value. The high mechanical quality factor ( Q m ) value obtained for NK x NCT ceramics did not correspond to a higher concentration of oxygen vacancies, illustrating that the suitable compensation (excess Na and K ) is more important than the concentration of oxygen vacancies to obtain the ceramics with high Q m values. The NK x NCT ceramics with x  =   1.01 exhibited excellent piezoelectric properties, with k p and Q m values of 39.9% and 2,070, respectively.

Description: Low-temperature sintering of β-spodumene ceramics with low coefficient of thermal expansion (CTE) was attained using Li 2 O – GeO 2 sintering additive. Single-phase β-spodumene ceramics could be synthesized by heat treatment at 1000°C using highly pure and fine amorphous silica, α-alumina, and lithium carbonate powders mixture via the solid-state reaction route. The mixture was calcined at 950°C, finely pulverized, compacted, and finally sintered with or without the sintering additive at 800°C–1400°C for 2 h. The relative density reached 98% for the sample sintered with 3 mass% Li 2 O – GeO 2 additive at 1000°C. Its Young's modulus was 167 GPa and flexural strength was 115 MPa. Its CTE (from R.T. to 800°C) was 0.7 × 10 −6  K −1 and dielectric constant was 6.8 with loss tangent of 0.9% at 5 MHz. These properties were excellent or comparative compared with those previously reported for the samples sintered at around 1300°C–1400°C via melt-quenching routes. As a result, β-spodumene ceramics with single phase and sufficient properties were obtained at about 300°C lower sintering temperature by adding Li 2 O – GeO 2 sintering additive via the conventional solid-state reaction route. These results suggest that β-spodumene ceramics sintered with Li 2 O – GeO 2 sintering additive has a potential use as LTCC for multichip modules.

Description: Pyrochlore-structured lanthanide stannate ceramic ( Ln 2 Sn 2 O 7 ) has been synthesized via a new complex precipitation method. A suite of characterization techniques, including FTIR, Raman, X-ray, and electron diffraction as well as nitrogen sorption were employed to investigate the structural evolution of the synthesized and calcined powder. Raman, XRD, and selected area electron diffraction results confirm the presence of the pyrochlore structure after calcination of the powder above 1200°C. TEM imaging shows fine crystallites gradually increased in size from approximately 100 nm to about 500 nm with higher calcination temperatures. Grain growth and powder densification upon increasing the calcination temperature was confirmed by nitrogen sorption results. This aqueous synthetic method provides a simple pathway for the preparation of homogeneous lanthanide stannate ceramics.

Description: The crystal structures of the alkali aluminium thiohypodiphosphates M I AlP 2 S 6 (M I = Li, Na) are reported. NaAlP 2 S 6 crystallizes in the orthorhombic space group Fdd 2 (no. 43) with a = 8.0400(2), b = 10.9452(2), c = 20.8801(4) Å, and V = 1837.44(7) Å 3 ( Z = 8). It is isostructural with AgAlP 2 S 6 , which is consistent with the similar ionic radii of Na and Ag. In contrast, LiAlP 2 S 6 crystallizes in a different structure type which has not been observed in the large number of thiohypodiphosphates reported so far. It crystallizes in the monoclinic space group C 2/ c (no. 15) with a = 6.783(3), b = 10.365(4), c = 11.776(4) Å, β = 94.399(5)°, and V = 825.46(5) Å 3 ( Z = 4).

Description: We present the synthesis of 7-(diphenylphosphine)-indole 1 ( HPinol ) as a novel mono- and bidentate P - and N, P -ligand and its coordination chemical behaviour towards the d 6 - and d 8 -transition metals rhodium(III), palladium(II) and rhenium(I). The reaction of 1 with [Cp*RhCl 2 ] 2 in a 1:2 molar ratio leads to the formation of the P -coordinated complex [RhCl 2 ( P –( HPinol ))] ( 2 ). In the presence of the weak base NEt 3 , HCl elimination occurs by forming the neutral amido-phosphine chelated complex [RhCl( N, P –( Pinol ))] ( 3 ). The same P - and N, P -coordination is observed for palladium(II), where two ligands 1 coordinate to the metal centre forming the neutral complexes [PdCl 2 ( P – HPinol ) 2 ] ( 4 ) and [Pd( N, P – Pinol ) 2 ] ( 5 ). The reaction of Re(CO) 5 Br in the presence of NEt 3 and PPh 3 delivers the amido-phosphine complex [Re(CO) 3 PPh 3 ( N, P – Pinol )] ( 6 ). All products were characterised by multinuclear NMR spectroscopy, MS and IR spectra as well as elemental analysis. Furthermore, crystal structures of ligand 1 and all complexes 2–6 are presented.

Description: Ceramics have played a crucial role in the development of fission based nuclear power, in glass & glass composite high level wasteforms, in composite cements to encapsulate intermediate level wastes (ILW) and also for oxide nuclear fuels based on UO 2 and PuO 2 /UO 2 mixed oxides. They are also used as porous filters with the ability to absorb radionuclides (RN) from air and liquids and are playing a key role in the cleanup at Fukushima. Non-oxides also find current fission applications including in graphite moderators and B 4 C control rods. Ceramics will continue to be significant in the near-term expansion of nuclear power via next-step developments of fuels with inert matrices or based on thoria and in wasteforms using alternative composite cements or single or multiphase ceramics that can host Pu & other difficult RN. Longer term advances for Generation IV reactors, which will operate at higher temperatures & with higher fuel burn-up require innovative fuel developments potentially via carbides & nitrides or composite fuel systems. Novel non-thermal (cement-like) and thermal techniques are currently being developed to treat some of the difficult legacy wastes. Non-thermally derived wasteforms developed from geopolymers, composite cements, hydroceramics, and phosphate-bonded ceramics and thermally derived wasteforms made by Hot Isostatic Pressing and fluidized bed steam reforming (FBSR) as well as vitrification techniques based on cold crucible melting (CCM), Joule-heater in-container melting and plasma melting (PM) are described. Future developments in waste treatment will be based on separation technologies for partitioning individual RN along with design & construction of RN-containing ceramic targets for inducing transmutation reactions. Near demonstration actinide-hosting ceramic wasteforms including multiphase Synroc systems are described. Opportunities also exist for ceramics in structural applications in Generation IV reactors such as composite SiC / SiC and C / C for fuel cladding and control rods and MAX phases and ultrahigh-temperature ceramics (UHTCs) may find near core fuel coating and cladding applications. Uses of ceramics in fusion reactor systems will be both functional (ceramic superconductors in magnet systems for plasma control and in Li silicate breeder blankets in tokamaks) and structural including as sapphire diagnostic windows, graphite diverters, and plasma facing C and UHTCs. In all these cases, performance is limited by poorly understood radiation damage and interface controlled processes, which demands a combined modeling/experimental approach.

Description: In the course of investigations relating to magnesia oxysulfate cement the basic magnesium salt hydrate 3Mg(OH) 2 · MgSO 4 · 8H 2 O (3–1–8 phase) was found as a metastable phase in the system Mg(OH) 2 -MgSO 4 -H 2 O at room temperature (the 5–1–2 phase is the stable phase) and was characterized by thermal analysis, Raman spectroscopy, and X-ray powder diffraction. The complex crystal structure of the 3–1–8 phase was determined from high resolution laboratory X-ray powder diffraction data [space group C 2/ c , Z = 4, a = 7.8956(1) Å, b = 9.8302(2) Å, c = 20.1769(2) Å, β = 96.2147(16)°, and V = 1556.84(4) Å 3 ]. In the crystal structure of the 3–1–8 phase, parallel double chains of edge-linked distorted Mg(OH 2 ) 2 (OH) 4 octahedra run along [–110] and [110] direction forming a pattern of crossed rods. Isolated SO 4 tetrahedra and interstitial water molecules separate the stacks of parallel double chains.

Description: The promotion of zircon ( ZrSiO 4 ) crystallization by ZnO from a zirconium-based frit glaze was studied and the possible mechanism was discussed. X-ray diffraction was used to analyze the relative quantities of zircon and other transitional crystals in the samples. The results show that ZnO can significantly decrease the crystallization temperature of zirconium-based glaze, depress the formation of Ca 2 ZrSi 4 O 12 , and promote the devitrification of transitional crystals t - ZrO 2 and Ca 2 ZnSi 2 O 7 , as well as lead to the formation of more zircon than the ZnO -free glaze. It was also found that zircon not only can form from the interaction between t - ZrO 2 and SiO 2 but also can devitrify directly from the glass phase of zirconium-based glaze.

Description: Barium-substituted CsAlSi 2 O 6 pollucites, Cs x Ba (1− x )/2 AlSi 2 O 6 , and barium- and iron-substituted pollucites, Cs x Ba (1− x )/2 Al x Fe 1− x Si 2 O 6 and Cs x Ba 1− x Al x Fe 1− x Si 2 O 6 were synthesized with 1 ≥  x ≥ 0.7 using a hydrothermal synthesis procedure. Rietveld analysis of X-ray diffraction data confirmed the substitution of Ba for Cs and Fe for Al , respectively. The crystallographic analysis also describes the effects of three different types of pollucite substitutions on the pollucite unit cell: Ba 2+ for Cs 1+ cation results in little effect on cell dimensions, intermediate concentrations of Ba 2+ and Fe 3+ substitution result in net minor expansion due to Fe 3+ addition, and large Ba and Fe substitutions result in overall framework contraction. Elemental analysis combined with microscopy further supports the phase purity of these new phases. These materials can be used to study the stability of CsAlSi 2 O 6 as a durable ceramic waste form, which could accommodate with time Cs and its decay product, Ba . Furthermore, success in iron substitution for aluminum into the pollucite lattice predicts that redox charge compensation for Cs cation decay is possible.

Description: Nitrogen-doped mullite fibers were first synthesized through the nitridation of Al 2 O 3 – SiO 2 gel fibers in NH 3 . The results showed that nitrogen take-up began at 800°C, reached the maximum at 900°C, and then decreased with increasing temperature. The ceramic fibers nitridated at 900°C were essentially amorphous, but contained a small amount of nano-sized Al – Si spinel crystals. Mullite was formed after nitridation at 1200°C, accompanied by crystallization of χ- SiAlON and δ- Al 2 O 3 . The incorporation of nitrogen resulted in the formation of a variety of nitrogen-containing crystalline phases. The grain size of the mullite fibers can be adjusted by changing of the nitrogen content.

Description: The solubility limit of Ca in 99.99% pure α- Al 2 O 3 (alumina) was measured using a wavelength dispersive spectrometer mounted on a scanning electron microscope. Al 2 O 3 samples were equilibrated at a concentration which ensured saturation of the Al 2 O 3 grains with Ca , and were quenched in water from 1600°C. The results were compared with those from samples which were furnace cooled from 1600°C. For the quenched samples, the Ca solubility limit was found to be 51 ± 1 ppm, which is significantly larger than the solubility limit for samples which were furnace cooled (26 ± 1 ppm).

Description: The cover picture shows the synthesis and the molecular structure of a zwitterionic [4.3.0]-bicyclic aluminum-phosphorus compound with annulated C 3 P 2 and Al 2 C 2 PH heterocycles and a 3c-2e Al–H–Al bond. Treatment of the dialkynylphosphine Mes–P(–C=C–CMe 3 ) 2 ( 1 ) with diethylaluminum hydride ( 2 ) in an equimolar ratio afforded a mixture of compounds, in which a [3.2.0]-bicyclic compound 3 with annulated fourmembered AlC 2 P and five-membered P 2 C 3 heterocycles could be identified by NMR spectroscopy. Excess of the hydride 2 yielded small quantities of the zwitterionic [4.3.0]-bicyclic compound 4 , which formally resulted from the unique insertion of a diethylaluminum hydride molecule into the Al–C(vinyl) bond of the strained fourmembered heterocycle of 3 . A six-membered ring is formed which contains an Al–H–Al 3c-2e bond. More details can be found in the Article by Werner Uhl et al. on page 1181 ff.

Description: Using the bis(pyrazolyl)pyridinylmethane ligand α,α,α-bis(1-pyrazolyl)(2-pyridinyl)toluene {(ph)C(pz) 2 (py)} for bioinorganic inspired coordination chemistry studies, we synthesised and structurally characterised three monofacial complexes [{(ph)C(pz) 2 (py)}CoCl 2 ] ( C1 ), [{(ph)C(pz) 2 (py)}CuCl 2 ] ( C2 ), [{(ph)C(pz) 2 (py)}ZnCl 2 ] ( C3 ) and the binuclear halogenido-bridged complexes [{(ph)C(pz) 2 (py)} 2 (μ-Cl) 2 Fe 2 Cl 2 ] ( C4 ) and [{(ph)C(pz) 2 (py)} 2 (μ-Br) 2 Cu 2 Br 2 ] ( C5 ). In four of these complexes, severe disorders between pyrazolyl and pyridinyl donor groups are observed such that bis(pyrazolyl) and (pyrazolyl)(pyridinyl) coordination modes are concomitantly found. The donor competition is dissected by DFT calculation of the energy differences between the two coordination modes and NBO analysis of the donor situation. The pyrazolyl units provide with more donor strength although pyridine is considerably more basic.

Description: Metal ions poisoning can result from environmental factors, intentional action, or disruption of homeostasis. Although the origin of toxicity may be different, the treatment is similar. Chelation therapy aims to remove the excess of metal ions from tissues to stop further damage of cells. For almost every metal ion, molecules that are able to bind it and remove from the human body are known. Over the years some new chelating agents were discovered and introduced into clinical treatment. In this paper we have focused on typical chelators for metal ions, both essential and toxic for humans. The treatment of poisoning caused by essential metal ions is hard due to the risk of removing them from the biologically relevant molecules (e.g. enzymes). Acute metal ions poisoning is rather rare, so the development of chelators for such cases are historical, but prolonged toxicity of, especially, essential metal ions is extensively studied.

Description: The reactions of [Os(NO)Cl 5 ] 2– with glycine (GlyH), picolinic acid (PicoH), L -proline ( L -ProH) and D -proline ( D -ProH) afforded four novel complexes of the general formula [Os(NO)Cl 3 (AA)] – , where AA = Gly, Pico, L -Pro and D -Pro, respectively. X-ray diffraction studies have revealed that in all cases the same isomer type from three theoretically possible, has been isolated, namely mer (Cl), trans (NO, O)-[Os(NO)Cl 3 (AA)] – . Spectroscopic and electrochemical properties, behavior in aqueous solution and antiproliferative activity in three human cancer cell lines are also reported.

Description: The electron distributions in position and in momentum space of the hcp metals magnesium and zinc are investigated experimentally and compared to results of quantum-chemical calculations. Furthermore, a survey is given on recent analyses of the bonding properties of zinc and cadmium, using the method of increments. The experimental deformation densities were obtained by refining multipole models to X-ray diffraction data sets measured at 100 K with either Mo- K α (Mg) or Ag- K α (Zn) radiation. The final R F values (Valray/Jana2006) are 0.0028/0.0034 (Mg) and 0.0068/0.0068 (Zn). The differences to deformation densities obtained from periodic density functional calculations are discussed. The effect of dynamical electron correlation on the electron density was analyzed, using cluster models. Compton profiles were measured with 88.67 keV synchrotron radiation at beamline ID15B at the ESRF in Grenoble. Varied orientations of the samples allowed for probing the projected momentum distribution along the [100], [423] and [001] directions. Fourier transforms of the computed reciprocal form factor B ( r ) resulted in the corresponding theoretical Compton profiles. It is suggested that the anomalous hcp structure of zinc is favored by a kinetic balancing of the valence electrons, i.e. correlation mediated 4 s -3 d interactions.

Description: . This Research Report provides an overview on synthesis, structure, and reactivity of the recently discovered carboranylamidinate ligands. Carboranylamidinate anions of the type [( o -C 2 B 10 H 10 C(NHR)(=N R )] – ( R = i Pr, cyclohexyl) are readily accessible via addition of o -lithiocarborane to N , N ′-carbodiimides R –N=C=N– R . They combine the highly versatile characteristics of both amidinates and carboranes in one unique ligand system. Unlike simple amidinate anions, the carboranylamidinates coordinate to metal ions not as typical N , N ′-chelating ligands but adopt an unexpected κ 2 C, N -bonding mode. The free imine functionality in carboranylamidinates can be further deprotonated. The resulting dianions were demonstrated to be excellent starting materials for novel boron-rich heterocycles incorporating e.g. Si, Sn, P, or transition metals such as Ti, Zr, Rh, and Ir. Further modification of the carboranylamidinate cage structure includes the introduction of additional functional groups like –SH or –SeH as well as the selective removal of a boron atom with formation of novel nido -type dicarbollylamidinate ligands. An initial study already showed that transition metal carboranylamidinates are potentially useful as polymerization catalysts.

Description: KSbWO 6 was prepared by sol-gel method. N-doped KSbWO 6 (KSbWO 6– x N x ) was obtained by heating KSbWO 6 and urea at 400 °C. Both the compounds are characterized by powder X-ray diffraction (XRD), TEM, SEM-EDS, X-ray photo electronic spectroscopy (XPS), and UV/Vis diffuse reflectance spectroscopy (UV-DRS). A shift in the peak positions of powder XRD and XPS spectra was observed. The band gap energy ( E g ) of KSbWO 6 and N-doped KSbWO 6 was obtained from their diffused reflectance spectra. E g was reduced from 3.17 eV to 2.56 eV upon nitrogen doping in KSbWO 6 . The reduction of the E g is attributed to the lifting of valence band of N-doped KSbWO 6 , due to the mixing of O 2p states with N 2p states. The photocatalytic activity of both the samples was studied by degradation of methylene blue (MB). The nitrogen doped KSbWO 6 shows higher photocatalytic activity compared to that of KSbWO 6 .

Description: The possibility of developing large solid oxide fuel cell (SOFC) stacks based upon 25 cm 2 ceramic oxide anode-supported cells is investigated. Planar fuel cells comprising strontium titanate-based anode support impregnated with active catalysts were prepared using a combination of deposition techniques. The fuel cell tests performed in a semisealed rig have shown power densities of 185 mW cm −2 at 850°C using humidified hydrogen as fuel and air as oxidant. The structure and evolution of the catalytically active impregnated materials-10 mol% Gd -doped CeO 2 and nickel- are analysed using electron microscopy at the end of the fuel cell test, revealing that a ceria and nickel layer surrounds the titanate backbone grains while ~50–150 nm spherical-like nickel particles uniformly decorate this top layer.

Description: Structural and dielectric properties of (1− x ) BaTiO 3 – x Bi ( Mg 1/2 Ti 1/2 ) O 3 ( x  = 0.1–0.5) were investigated to understand the binary system and utilize it for high-voltage, high energy density capacitors. The solubility limit for Bi ( Mg 1/2 Ti 1/2 ) O 3 in a BaTiO 3 perovskite was between x  = 0.4 and x  = 0.5. A phase with pseudocubic symmetry was formed for x  = 0.1–0.4; a secondary phase developed at x  = 0.5. Dielectric measurements showed highly diffusive and dispersive relaxor-like characteristics from 10 to 40 mol% of Bi ( Mg 1/2 Ti 1/2 ) O 3 . These compositions also showed high relative permittivity with low-temperature coefficients of permittivity over a wide range of temperatures −100°C–600°C. Relaxation behavior was quantitatively investigated using the Vogel–Fulcher model, which revealed the activation energy of 0.17–0.22 eV. Prototyped multilayer capacitors of 18 mm × 17 mm × 4 mm dimensions with a capacitance of 12.5 nF at 1 kHz were successfully constructed and demonstrated multiple charge–discharge characteristics up to 10 kV.

Description: K 3 Gd ( PO 4 ) 2 : RE 3+ (RE = Eu, Tb) are prepared by solid-state reaction and their photoluminescence (PL) properties are investigated under UV and VUV excitation, respectively. The obtained experimental data show that no energy transfer happens among the activator ions Tb 3+ or Eu 3+ under UV excitation. Under 147-nm excitation, the strongest emission intensity of K 3 Gd ( PO 4 ) 2 : RE 3+ (RE = Eu, Tb) is obtained when the activator ions Tb 3+ or Eu 3+ concentration is 0.8 mol, the integrate emission intensity of K 3 Gd 0.2 (PO 4 ) 2 :0.8Tb 3+ is about 204% of commercial phosphor Zn 1.96 SiO 4 :0.04 Mn 2+ with chromaticity coordinates of (0.340, 0.561) and the decay time of about 5.09 ms under 147-nm excitation. We analyze the experimental data and propose a possible energy-transfer mechanism under 147-nm excitation.

Description: The 0.72 Bi ( Fe 1− x Al x ) O 3 –0.28 BaTiO 3 ( x  = 0, 0.01, 0.03, 0.05, and 0.07, abbreviated as BFA x – BT ) lead-free high-temperature ceramics were prepared by the conventional ceramic processing. Systematic investigation on the microstructures, crystalline structures, dielectric and piezoelectric properties, and high-temperature stability of piezoelectric properties was carried out. The crystalline structures of BFA x –BT ceramics evolve from rhombohedral structure with x 〈  0.01 to the coexistence of rhombohedral structure and pseudocubic phases with x  ≈ 0.01, finally to pseudocubic phases when x 〉  0.03. Remarkably high-temperature stability with near-zero temperature coefficient of piezoelectric properties ( TCk p ), together with improved piezoelectric properties has been achieved for x  = 0.01 BFA x –BT ceramics. The BFA x –BT( x  = 0.01) ceramics simultaneously show the excellent piezoelectric properties of d 33  = 151 pC/N, k p  = 0.31 and super-high-temperature stability of T d  = 420°C, TCk p  = 1 × 10 −4 . It is considered that the observed strong piezoelectricity and remarkably high-temperature stability should be ascribed to the phase coexistence of rhombohedral and pseudocubic phases. The rhombohedral phases have a positive TCk p value and the pseudocubic phases possess a negative TCk p value. Thus, the TCk p value of BFA x –BT ceramics can be tuned by composition of x .

Description: The chemistry of cytotoxic platinum(II) complexes is more or less restricted to ligand exchange reactions, derivatization of coordinated ligands is cumbersome, and subsequent purification in many cases impossible. Consequently, kinetically more inert platinum(IV) complexes found their way into the development of novel, promising anticancer drugs. Research has focused more and more during the last years on the use of platinum(IV) complexes featuring one or two axial succinato ligands in which one carboxylic acid moiety is available for further derivatization. In order to gain a deeper insight into the mechanism of action, isotopically labeled platinum(IV) complexes with axial (1,4– 13 C 2 )succinato ligands were synthesized and fully characterized by multinuclear ( 1 H, 13 C, 15 N, and 195 Pt) 1D- and 2D-NMR spectroscopy. Especially of note in this context is a long range 1 H, 13 C shift correlation signal detected between the equatorial ammine protons and the axially coordinated carboxylato moiety. Furthermore, their behavior in extracts of SW480 cancer cells was investigated. Preliminary results demonstrate that cisplatin analogs are reduced significantly faster in comparison to carboplatin analogs.

Description: The Cu II solution chemistry of synthetic derivatives of naturally occurring pseudo-octapeptides (patellamides and ascidiacyclamide) is described. The complex stabilities [mono- and dicopper(II) complexes] of five different ligands were determined by isothermal microcalorimetry (ITC), and square wave voltammetry (SQW) was used to elucidate the electrochemical properties. In agreement with published spectroscopic data, there is cooperative binding of two Cu II ions and the overall stabilities are, in agreement with known stabilities of the natural ligands and expectations based on the donor sets (two N-based heterocycles and one amide per Cu II ), only moderate ( K ≤ 10 6 ). There is a slight dependence of the stabilities on the ligand structure (configuration of the side chains), and that derived from the natural products forms the most stable complexes. Due to the complex equilibria in solution and the instability of the reduced forms, voltammetry shows complex equilibria, which preclude the full assignment of all processes. The positive reduction potentials are in agreement with relatively low complex stabilities. These observations complete earlier studies, concentrating on spectroscopy and structural aspects, and are also discussed in relation to the possible biological function of the cyclic peptides, i.e. metal ion transport, oxygen activation, carboanhydrase, and phosphatase activities.

Description: Setting out from protected L -cysteine a 2,5-diketopiperazine V can be synthesized, the reduction of which with NaBH 4 /TiCl 4 leads to (6 R ,8 aR )-7-methyl-6-(sulfanylmethyl)-thiazolidine [3,4- a ] piperazine, L 1 H as well as N , N ′-dimethyl-(2 R ,5 R )-bis(sulfanylmethyl) piperazine, L 2 H 2 , which were separated and characterized. L 2 H 2 can be obtained selectively, if V is reduced by NaBH 4 /TiCl 4 in the presence of DIEA · HCl, and it represents a precursor for a novel, chiral ligand, as after deprotonation it provides two thiolato and two amino donor functions for the coordination of a metal atom. Deprotonation of L 1 H and L 2 H 2 with NaOMe followed by treatment with NiBr 2 (dme) led to the isolation of the dimeric complexes [L 1 NiBr] 2 ( 1 ) and [L 2 Ni] 2 ( 2 ), respectively. Both were fully characterized, and cyclic voltammetry indicated the possibility of Ni II → Ni III oxidations for complex 2 . 2 can be regarded as a structural model for the A clusters of the acetyl coenzyme A synthase.

Description: Owing to the widespread presence of electromagnetic interferences, it is necessary to develop new materials with excellent high-temperature electromagnetic wave (EM) absorption properties. In the present work, ZnO is infiltrated into porous ZrSiO 4 substrates to form ZnO / ZrSiO 4 composite ceramics using sol-gel process. The doping of aluminum results in the improvement of electrical conductivity and the significant change in the morphology of ZnO . With the increase in environment temperature during measurement, the permittivity of the composite ceramics increases first and then decreases dramatically, which is attributed to the change in conductive loss. The electrical conductivity increases with increasing measurement temperature. However, the concentration of oxygen vacancies decreases under air atmosphere when the measurement temperature increases continuously, which results in the reduction in conductivity. Therefore, permittivities of the undoped and doped ceramics measured at 673 K are higher than the ones at the other temperatures. The composite ceramics maintain a relatively high EM absorption coefficient, low reflection coefficient (RC), and wide effective absorption bandwidth at environment temperatures up to 773 K. As a result, we conclude that the ZnO / ZrSiO 4 composite ceramics exhibit a promising prospect as a kind of high-temperature EM absorbing material.

Description: [0001] textured alumina ceramics with a fine grain size were fabricated between 1400°C and 1600°C via templated grain growth (TGG) using fine alumina platelets (~0.6 and ~3 μm diameter) aligned by tape casting in either a 50 nm α- Al 2 O 3 matrix powder, or in a seeded boehmite sol. The 3 μm templates could be readily aligned by tape casting in both matrices (orientation parameters r  = 0.27 and 0.18, respectively), whereas 0.6 μm diameter templates were well aligned in the seeded boehmite sol only ( r  = 0.29). Improved alignment in boehmite sols is attributed to inorganic gelation, resulting in a strongly pseudo-plastic rheology that preserves template alignment against the influence of Brownian motion. The in situ formation of fine α- Al 2 O 3 matrix after transformation in the seeded boehmite system results in a higher driving force for TGG and improves texture development. The combination of 3 μm templates with a seeded boehmite matrix results in extremely high texture qualities (texture fraction f  = 0.97–0.99, r  = 0.17) while maintaining a relatively fine grain size (5–10 μm in diameter and 1.5–3 μm in thickness). Although undoped samples can be fully textured at 1600°C, adding as little as ~0.25 wt% CaO / SiO 2 dopant improves TGG kinetics and yields full texture at 1400°C.

Description: Yttria partially stabilized zirconia Y-PSZ/glass-ceramic composites were prepared by reaction sintering using powder mixtures of a SiO 2 – Al 2 O 3 – ZnO – CaO – ZrO 2 – TiO 2 -based glass and yttria partially stabilized zirconia (Y-PSZ). The glass crystallized during sintering at temperatures of 1173, 1273, and 1373 K to give a glass-ceramic matrix for high-temperature protecting coatings. With the increasing firing time, the added zirconia reacted with the base glass and a glass-ceramic material with dispersed zircon particles was prepared in situ . Furthermore, the added zirconia changed the crystallization behavior of the base glass, affecting the shape, amount, and distribution of zircon in the microstructure. The bipyramid-like zircon grains with imbedded residual zirconia particles turned out to have two growth mechanisms: the inward growth and the outward growth, and its rapid growth was mainly dominated by the later one. For comparison, the referenced glass-ceramic was prepared by sintering using exclusive glass granules and its crystallization behavior at 1173–1373 K was examined as well. Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), and X-ray diffraction (XRD) were used to characterize the crystallization behavior of the base glass and the phase evolution of the Y-PSZ/glass-ceramic composites.

Description: In this study, we present the preparation of a bulk material with a composition of 80 GeTe 2 –20 Ga 2 Te 3 by combining mechanosynthesis and sintering. This composition cannot be prepared by conventional melt/quenching technique. The progressive evolution of the powder during ball-milling is followed by X-ray Diffraction (XRD) and Differential Scanning Calorimetry analysis. The final powder obtained is highly crystalline, but a glass transition temperature ( T g ) is observed, indicating the presence of some amorphous phase remaining, allowing for its efficient sintering. By hot-pressing, a dense bulk material with a fine microstructure and a high electrical conductivity is obtained. The synthesis method described represents a simple and cost-effective way to produce tellurium-based materials of desired dimension with potential applications for optical storage or thermoelectric devices.

Description: Revealing and understanding the microscopic origins of the macroscopic properties of aluminosilicate glasses is important for the design of new glasses with optimized properties. In this work, we study the composition-structure-property relationships in 20 MgO / CaO sodium aluminosilicate glasses upon Al 2 O 3 -for- SiO 2 and MgO -for- CaO substitutions. We find that some properties (density, molar volume, Young's modulus, and shear modulus) are linear through the investigated range of Al 2 O 3 compositions, while others (refractive index, coefficient of thermal expansion, Vickers hardness, isokom temperatures, and liquid fragility index) exhibit a change in the slope around the composition with [ Al 2 O 3 ] = [ Na 2 O ], which is especially pronounced for the glasses containing MgO . We discuss these phenomena based on structural information obtained by NMR spectroscopy and topological considerations.

Description: In this article the changes on the surface of the 45S5 bioglass submitted to an enrichment with calcium ions were investigated. The method employed was the immersion of bioglass in calcium molten salt bath at 450°C. Changes in composition were probed by different techniques of chemical analysis. The use of SEM-EDS allowed estimating the thickness modified, as being about 10 μm. X-ray photoelectron spectroscopy enabled to infer over the structural changes on the surface of 45S5 bioactive glass. The entry of calcium in the vitreous network promoted the phase separation of microdomains rich in silica and phosphate on the surface of the glass. The formation of immiscibility region was attributed a depolymerization of silica network and also, to a possible migration of phosphate species from the bulk. The results of this study indicate a great change in the surface properties of this biomaterial. In addition, the method proposed in this study proved to be very promising in the possibility of designing the surface of bioactive glasses, to modulate the desired properties, keeping the bulk unchanged.

Description: Lanthanum hexaaluminate is a promising competitor to establish yttria partially stabilized zirconia as a thermal barrier coating material for Ni -based superalloy due to its relative low intrinsic thermal conductivity and low sinterability at temperatures exceeding 1100°C. Sr 2+ and Ti 4+ were selected as two dopants to partially substitute the La 3+ and Al 3+ in LaMgAl 11 O 19 , respectively. The variation in thermal conductivity with Sr 2+ and Ti 4+ fractions was analyzed based on structure information provided by X-ray diffraction and Raman spectroscopy. The average crystal size of LaMgAl 11 O 19 sintered at 1600°C for 10 min by spark plasma sintering is in nanoscale. The fully dense La 1− x Sr x MgAl 11− x Ti x O 19 solid solution showed a minimum thermal conductivity value (λ = 1.12 W/(m K) −1 , T  = 1273 K) at the composition of La 0.5 Sr 0.5 MgAl 10.5 Ti 0.5 O 19 ,which possibly reduces from the enhanced phonon scattering due to mass and strain fluctuations at the Ln 3+ and B 3+ sites.

Description: Aqueous 3Y-TZP inks with solid contents of 22 and 27 vol% were used for fabricating three-dimensional ceramic components by the direct ink-jet printing process (DIP). The DIP fabrication was realized using a thermal ink-jet (TIJ) printing system. Despite the different physical properties of the inks, both inks were successfully ejected and deposited. To define the optimum window of the ink properties required for a stable printing operation, both ceramic inks as well as a typical TIJ ink were characterized in terms of particle size distribution, zeta potential, viscosity, surface tension, and the inverse Ohnesorge number ( Oh −1 ). Moreover, single drops of all inks were deposited and analyzed by scanning electron microscopy (SEM) to examine the form and integrity of the ejected drops. Demonstration objects (a base with curved channels and a sample molar tooth) were DIP fabricated using both of the ceramic inks. These objects show the potentials of the DIP process for ceramics manufacturing particularly by using TIJ printing systems.

Description: A new chiral racemic ligand ( o -carboranyl)bis(2-hydroxymethyl)pyridine oCB(hmpH) 2 , that is composed of a central o -carborane unit where two arms radiate out of the cluster carbons each one containing a 2-pyridylmethylalcohol chelating arms, provides two potentially bidentate {NO} or one tetradentate {N 2 O 2 } binding pockets. An unprecedented octahedral Co II complex [CoCl 2 ( anti - oCB (hmpH) 2 ] was obtained under aerobic conditions and characterized by X-ray crystallography as well as IR and NMR spectroscopy. anti - oCB (hmpH) 2 acts as a tetradentate N 2 O 2 -ligand affording the complex as a racemic mixture of cis- α Δ-[CoCl 2 ( RR anti - oCB (hmpH) 2 )] and Λ-[CoCl 2 ( SS anti - oCB (hmpH) 2 )]. The new ligand oCB(hmpH) 2 appears to be suitable for producing a variety of new chiral-at-metal complexes.

Description: Spherical granules of aluminum nitride (AlN) with an average particle size of about 50 μm were produced from aqueous suspensions using an AlN powder surface treated against hydrolysis with aluminum dihydrogenphosphate [Al(H 2 PO 4 ) 3 ]. Two different amounts of Al(H 2 PO 4 ) 3 were tested and the effects of surface treatment and aging time were evaluated by various techniques (XRD, TG-DTA, zeta potential and pH measurements). The treated powder exhibited antihydrolytic property and good dispersing behavior, enabling the preparation of low-viscosity and high-concentration aqueous AlN slurries for freeze granulation. The spherical AlN granules were sintered in a boron nitride (BN) powder bed followed by ultrasonic washing of the AlN granulates/BN mixture to remove BN. The sintered spherical AlN granules present excellent crystallinity and high sphericity as observed from SEM micrographs.

Description: Near-infrared (NIR) quantum cutting involving the emission of two NIR photons for each visible photon absorbed is realized from Eu 2+ /Yb 3+ codoped chalcohalide glasses. Excitation, emission and decay spectra are measured to prove the occurrence of cooperative energy transfer (ET) from Eu 2+ to Yb 3+ . The maximum ET efficiency obtained is as high as 85%. The ET from Eu 2+ to Yb 3+ is followed by dipole-dipole interaction. The possible mechanism of ET is discussed.

Description: Well-crystallized pure BiFeO 3 nanopowders were successfully synthesized at the temperature as low as 120°C by an ethanol-assisted hydrothermal process. In this synthesis, the composition of the solvent played important roles in the formation of pure BiFeO 3 . The BiFeO 3 nanopowders synthesized with 4:3 ethanol/water ratio mainly consists of cubic structures with size from 50 to 150 nm. Zero-field-cooled (ZFC) and field-cooled (FC) magnetization measurements indicated that pure BiFeO 3 nanopowders showed a spin-glass transition below the freezing temperature. Moreover, the BiFeO 3 nanopowders exhibited ferromagnetic order at room temperature.

Description: Nanoparticles of Co 0.6 Zn 0.4 Fe 2 O 4 , with narrow size distribution, regular morphology, and high saturation magnetization, have been synthesized. The synthesis, involved a very rapid mixing of reducible metal cations with sodium borohydride, is carried out in a colloid mill and followed by a separate hydrothermal process. The microstructure and magnetic properties of the synthesized nanoparticles are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and vibrating sample magnetometer (VSM). The effects of different synthesis conditions (synthesis temperature and reaction time) on the characteristics of the ferrite nanoparticles are discussed. The changes in cation contribution are revealed by the Raman study. The magnetic measurements explore that all the as-synthesized samples are superparamagnetic in nature. The corresponding superparamagnetic behavior is explained by paramagnetic Langevin theory. Note that, the superparamagnetic Co 0.6 Zn 0.4 Fe 2 O 4 ferrite nanoparticle, with excellent performance, can be synthesized at 160°C for a short reaction time (4 h).