ALBERT

Description: The high elevation of the Southern Puna Plateau, the widespread melting of its crust, the gap in intermediate depth seismicity and the recent eruptions of ignimbrite complexes can be explained by delamination of the lithospheric mantle beneath it. To test this hypothesis, an array consisting of 73 broad band and short period seismic stations was deployed in the region for a period of two years starting in 2007. We inverted the data using the two plane wave approach and obtained 1D and 3D Rayleigh wave phase velocities. Our dispersion curve shows that at short periods (〈70 s) the phase velocities are slightly higher than those of the Tibetan plateau and lower than those of the Anatolian plateau. At periods of 100-140 s we observe a low velocity zone that might be remnant hot asthenosphere below a flat slab (7-10 Ma). We estimate the average continental lithosphere thickness for the region to be between 100 and 130 km. Our three dimensional Rayleigh wave phase velocities show a high velocity anomaly at low frequencies (0.007, 0.008 and 0.009 Hz) slightly to the north of Cerro Galan. This would be consistent with the hypothesis of delamination in which a piece of lithosphere has detached and caused upwelling of hot asthenosphere which in turn caused widespread alkaline-collision related volcanism. This interpretation is also corroborated by our shear wave velocity model where a high velocity anomaly beneath the northern edge of Cerro Galan at 130 km depth is interpreted as the delaminated block on top of the subducting Nazca slab.

Description: Coastally trapped waves, which are generated by alongshore wind and propagate along a coastline, are common around Australia's southern coast. Some details of the propagation of coastally trapped waves are still uncertain, partly because of the relatively coarse resolution of tide gauge observations as well as the complex ocean bottom surface over which the waves propagate. There has been some debate on the mechanism by which these waves propagate from the southern to eastern coasts of Australia.

Description: Mike Carr wrote recently of the wonderful planetary geology accomplished by NASA over the past 50 years of space exploration, with images and descriptions from the early Venus, Mars, and lunar missions as well as more recent missions, which evoked good memories (M. H. Carr, Geologic exploration of the planets: The first 50 years, Eos , 94 (3), 29–30, doi:10.1029/2013EO030001, 2013). Unfortunately, memories are not science data, and those 50 years have not been as kind to the scientific information collected by these pioneering missions.

Description: Numerical simulations have shown that the moisture in the tropical troposphere has a tendency to spontaneously aggregate, forming separate wet and dry regions. To learn more about how this self-organization occurs, Craig and Mack introduced a simple equation for the tropical troposphere moisture budget and conducted numerical simulations that included convective moistening and horizontal mixing. Based on their simulations, the authors propose that a feedback process in the troposphere causes moisture to aggregate, beginning on small scales and then coarsening to larger scales. Wet regions become wetter and dry regions become drier as the self-organization continues.

Description: Scientists generally believe that the Hawaiian Islands formed primarily through endogenous growth, or intrusion, in which hot magma intrudes into a rock and then solidifies before it reaches the surface. However, a new study suggests that the islands may actually have formed primarily through extrusion, which occurs when a volcano erupts and magma reaches the surface and flows away from the eruption site before cooling and solidifying.

Description: The general circulation model (GCM) experiments conducted under the Coupled Model Intercomparison Project Phase 5 (CMIP5) [ Taylor et al ., 2012], which is being conducted in preparation for the Intergovernmental Panel on Climate Change's Fifth Assessment Report, provide fundamental data sets for assessing the effects of global climate change. However, efforts to assess regional or local effects of the projected changes in climate are often impeded by the coarse spatial resolution of the GCM outputs, as well as potential local or regional biases in GCM outputs [ Fowler et al ., 2007].

Description: Homogenous liquid precursor for ZrC – SiC was prepared by blending of Zr ( OC 4 H 9 ) 4 and Poly[(methylsilylene)acetylene]. This precursor could be cured at 250°C and converted into binary ZrC – SiC composite ceramics upon heat treatment at 1700°C. The pyrolysis mechanism and optimal molar ratio of the precursor were investigated by XRD. The morphology and elements analyses were conducted by SEM and corresponding energy-dispersive spectrometer. The evolution of carbon during ceramization was studied by Raman spectroscopy. The results showed that the precursor samples heat treated at 900°C consisted of t- ZrO 2 (main phase) and m- ZrO 2 (minor phase). The higher temperature induced phase transformation and t- ZrO 2 converted into m- ZrO 2 . Further heating led to the formation of ZrC and SiC due to the carbothermal reduction, and the ceramic sample changed from compact to porous due to the generation of carbon oxides. With the increasing molar ratios of C / Zr , the residual oxides in 1700°C ceramic samples converted into ZrC and almost pure ZrC – SiC composite ceramics could be obtained in ZS-3 sample. The Zr , Si , and C elements were well distributed in the obtained ceramics powders and particles with a distribution of 100 ~ 300 nm consisted of well-crystallized ZrC and SiC phases.

Description: Black carbon, also known as soot, emitted from combustion of fuels and biomass burning absorbs solar radiation in the atmosphere and is one of the major causes of global warming, after carbon dioxide emissions. When black carbon is deposited on snow and ice, the soot-covered snow or ice absorbs more sunlight, leading to surface warming. Due to the large amount of snow and ice in the Arctic—which has warmed twice as fast as the global average over the past century—the region is likely to be especially sensitive to black carbon.

Description: In 1999, researchers published data from ice cores collected at Law Dome, a research site in East Antarctica. These data are distinguished by their high time resolution and by their overlap with modern measurements, providing one of the most important records of how the atmosphere's chemical composition changed over the past 1000 years. Air trapped in bubbles in the ice core let researchers measure the concentration of carbon dioxide and other gases and analyze the ratio of carbon-13 to carbon-12 isotopes in the atmospheric carbon dioxide. Burning fossil fuel releases carbon dioxide that is depleted in carbon-13 isotopes, and the Law Dome record provided evidence that modern increases in atmospheric carbon dioxide are due to anthropogenic activity. In a new study, Rubino et al ., a team that includes some of the authors from the original analysis, use novel tools and techniques to update their ice core record.

Description: Chlorine isotope compositions of high-pressure (~2.3 GPa) serpentinite, rodingite, and hydrothermally altered oceanic crust (AOC) differ significantly from high- and ultrahigh-pressure (〉3.2 GPa) metasedimentary rocks in the Aosta region, Italy. Texturally early serpentinites, rodingites, and AOC have bulk δ 37 Cl values indistinguishable from those of modern seafloor analogues (δ 37 Cl = -1.0 to +1.0‰). In contrast, serpentinites and AOC samples that recrystallized during exhumation have low δ 37 Cl values (-2.7 to -0.5‰); 37 Cl depletion correlates with progressive changes in bulk chemistry. HP/UHP metasediments have low δ 37 Cl values (median = -2.5‰) that differ statistically from modern marine sediments (median = -0.6‰). Cl in metasedimentary rocks is concentrated in texturally early minerals, indicating modification of seafloor compositions early in the subduction history. The data constrain fluid sources during both subduction- and exhumation-related phases of fluid-rock interaction: (1) Marine sediments at the top of the downgoing plate likely interacted with isotopically light pore fluids from the accretionary wedge in the early stages of subduction. (2) No pervasive interaction with externally derived fluid occurred during subsequent subduction to the maximum depths of burial. (3) Localized mixing between serpentinites and fluids released by previously isotopically modified metasediments occurred during exhumation in the subduction channel. Most samples, however, preserved protolith signatures during subduction to near-arc depths.

Description: We have measured Ni, Ca, and Mn in olivine phenocrysts from volcanoes in the Galápagos Archipelago to infer the mantle source lithologies. Results show that peridotite is the dominant source lithology for Fernandina, Floreana, Genovesa, Wolf Island, and Darwin Island. These volcanoes largely characterize the PLUME, WD, FLO and DUM Nd, Sr, and Pb isotopic endmembers of Harpp and White (2001). Volcan Wolf, Alcedo, Marchena, and Cerro Azul, also produced from the melting of peridotite sources, have isotopic compositions that can be defined by mixing of the 4 isotopic endmembers. Our analysis suggests that peridotite was present in the sources of the volcanoes covered in this study and therefore is the dominant source lithology of the Galápagos plume. Pyroxenite melting is generally focused in two isotopically distinct domains: Roca Redonda, Volcan Ecuador, and Sierra Negra in the enriched western part of the archipelago, and Santiago, Santa Cruz, and Santa Fe in the depleted east. One implication of this finding is that the Western and Eastern Pyroxenite Domains represent two separate bodies of recycled crust within the Galápagos mantle plume. Furthermore, both isotopically enriched and depleted domains of the archipelago were generated from mixtures of peridotite and pyroxenite. This suggests that there is no relationship between the source lithology of the Galápagos plume and its isotopic characteristics. The identification of peridotite source melting in volcanoes with isotopic characteristics that have been attributed to recycled crust points to the importance of mixing in OIB genesis, consistent with studies in the Canary Islands.

Description: Ce -doped BaTiO 3 -based ceramics were prepared and studied to satisfy ultra-broad temperature stability (from −55°C to 300°C, capacitance variation rate based on C 20°C is within ±15%). The sample with 0.6 mol% CeO 2 succeeds to achieve this performance with a remarkably high ceiling temperature of 300°C. Meanwhile, the sample has good dielectric and electrical properties at room temperature (ε r  = 1667, tanδ = 1.478%, ρ V  = 5.9 × 10 12  Ω·cm). Ce ion can substitute for Ti ion as Ce 4+ or Ba ion as Ce 3+ . The substitution decreases the spontaneous polarization of BaTiO 3 , and then weakens the ferroelectricity of BaTiO 3 . As a result, the temperature stability of samples is improved obviously. Besides, CeO 2 addition promotes the formation of exaggerated grains, which are consisting of Ba 6 Ti 17 O 40 .

Description: This study aims to optimize quantitative X-ray diffraction (XRD) mineralogical analysis of the minority phases in clinker. The proposed method consists of applying Rietveld quantitative refinement to the XRD patterns for both clinker and the insoluble residue remaining after it is attacked with methanol and salicylic acid (Takashima method). The method was tested with industrial clinker and the same material after modifying its mineralogy by refiring at 1500°C followed by slow cooling. The findings showed that the C 4 AF / C 3 A ratios for quickly and gradually cooled clinker were much higher when the clinker diffractograms were refined with the Rietveld procedure than when the proposed method was used. The proportion of C 3 A found with the proposed method was ≈2.8-fold higher than when Rietveld only was applied to the diffractograms for clinkers. Taken together, the refinement data for the two materials (clinker and Takashima residua) revealed that Rietveld quantitative XRD applied to clinker underestimates the low C 3 A content. These findings are supported by postsulfate attack durability studies conducted on cements prepared with the two clinkers.

Description: The effect of increasing poling fields on the properties of (1− x )BZT– x BCT compositions across the morphotropic phase boundary (MPB) is studied using large signal polarization and strain, small signal permittivity and piezoelectric coefficient, and XRD measurements. Successive poling causes charge carrier migration inducing an internal bias field, which becomes large with respect to the coercive field resulting in biased ferroelectric and ferroelastic switching. Improvements in piezoelectric coefficient of 9% are significantly smaller in the tetragonal 60BCT composition compared with the improvement of approximately 50% in the rhombohedral 40BCT and MPB 50BCT compositions. While the properties continue to change with increased poling fields, the remnant ferroelastic domain texture parallel to the field direction, as observed from XRD, stays approximately constant. The improvement in overall domain alignment leading to largely enhanced intrinsic piezoelectricity originates from the alignment of 180° domains and possibly non-180° domains in grains with orientations inclined to the electric field. As a result, poling is most effective in BZT–BCT materials that have low coercive fields, show low distortions and possess more polarization orientations, such as compositions in the rhombohedral phase field or near the MPB.

Description: The defect chemistry-modulated dielectric properties of dense yttria-doped zirconia ceramics prepared by conventional sintering (at 1350°C–1500°C) and electric field-assisted flash sintering (55 V/cm at 900°C) were studied by impedance spectroscopy. While the bulk dielectric properties from both sets of samples showed only small and insignificant changes in conductivity and permittivity, respectively, a huge increase of these properties was measured for the grain boundaries in the flash sintered specimens. A close analysis of these results suggests that flash sintering reduced grain-boundary thickness (by about 30%), while increasing the concentration of oxygen vacancies near these interfaces (by about 49%). The underlying mechanism proposed is electric field-assisted generation and accommodation of defects in the space-charge layers adjacent to the grain surface. The changes in measured permittivity are attributed to the boundary thickness effect on capacitance, while conductivity involved variations in its defect density-dependent intrinsic value, accounting for changes also observed in grain-boundary relaxation frequencies. Therefore, in terms of modifications to the specific dielectric properties of these materials, the overall consequence of flash sintering was to considerably lower the semi-blocking character of the grain boundaries.

Description: This article presents a detailed study on the nanoscaled interface between microelongated gold particles (GP) and biphase leucite/feldspar glass-ceramic matrix. The glass-ceramic composite with a nonuniform GP distribution was processed through hot-pressing under vacuum using a commercial dental ceramic furnace for glass-ceramic dental crown manufacturing. Heat treatments at 900°C, 1100°C, and 1300°C were conducted, and microstructural features along the interface were used to verify the chemical reactions between GP and glass-ceramic matrix. It was observed that the amorphous glass-ceramic matrix had nanoscaled biphase structures, and the distributed nanoscaled amorphous leucite phase was attracted to GP during hot-pressing, and was more reactive with GP than the feldspar phase. The thickness of the interfacial phase formed through chemical reactions between GP and glass-ceramic matrix is around 30 nm. The chemically bonded interface has contributed significantly toward the substantial improvements in both strength and toughness of the GP-reinforced glass-ceramic matrix composite. Characterization techniques, including X-ray diffraction and field-emission scanning electron Microscopy, incorporating X-ray microanalysis using energy dispersive spectrometry, have been employed in this study.

Description: In January 2013, approximately 2 months after Hurricane Sandy made landfall in the Mid-Atlantic Bight, scientists from the University of Texas Institute for Geophysics (UTIG), part of the Jackson School of Geosciences (JSG), partnered with local colleagues at Adelphi and Stony Brook universities and the U.S. Geological Survey (USGS) to conduct marine surveys both offshore and within inshore bays of Long Island, N. Y. (Figure 1a). The primary goal was to assess the storm's impact on the seabed.

Description: Volcanic craters are often formed by multiple subsurface explosions caused by the interaction of magma and groundwater [ Lorenz , 1973; Valentine and White , 2012]. To understand the processes and products of such explosions, scientists spent 2 years conducting experiments that produced craters on the meter scale at the Geohazards Field Station in Ashford, N. Y.

Description: A sudden shift in the strength of the Atlantic meridional overturning circulation (AMOC) is thought to be the most important mechanism behind several past abrupt changes in the climate. AMOC transports heat, salt, and nutrients throughout the Atlantic Ocean. Paleoclimate evidence has shown that changes in its strength affect the climate worldwide. Whether AMOC could suddenly shift again depends on whether the circulation can exist in more than one stable state.

Description: One of the most important services performed for AGU is the conscientious reviewing of submitted papers. Because of the nature of the reviewing process, this service is also one of the least recognized. Every year editors are asked to select the outstanding reviewers from the previous year. The reviewers listed below have been cited by editors of AGU journals and Eos for excellence in refereeing. These individuals are to be commended for consistently providing constructive and thoughtful reviews .

Description: In the 1930s, researchers first noticed that the Chesapeake Bay had a dead zone, an expanse of water with drastically reduced concentrations of oxygen. In the 1980s, hypoxia—low-oxygen conditions—gave way in some places to anoxia—a near-total depletion of dissolved oxygen. A lack of oxygen makes the water inhospitable for many marine organisms, and the Chesapeake Bay is the focus of major ecosystem rehabilitation efforts.

Description: Paleomagnetic analysis and radiocarbon dating of an expanded Holocene deep-sea sediment sequence recovered by Integrated Ocean Drilling Program (IODP) Expedition 303 from Labrador Sea Site U1305 (Lat: 57°28.5 N, Long. 48°31.8 W, water depth 3459 m) provides insights into mechanisms that drive both paleomagnetic secular variation (PSV) and magnetization acquisition in deep-sea sediments. Seventeen radiocarbon dates on planktonic foraminifera define postglacial (c. 8 ka) sedimentation rates as ranging from 35 to 〉 90 cm/kyr. Alternating field (AF) demagnetization of u-channel samples show that these homogeneous sediments preserve a strong, stable, and consistently well-defined component magnetization. Normalized remanence records pass reliability criteria for relative paleointensity (RPI) estimates. Assuming that the age of magnetization is most accurately defined by well dated PSV records with the highest sedimentation rates, allows us to estimate and correct for temporal offsets at Site U1305 interpreted to result from post-depositional remanence acquisition at a depth of ~ 20 cm. Comparisons indicate that the northern North Atlantic PSV and RPI records are more consistent with European than North American records, and the evolution of virtual geomagnetic poles (VGP) are temporally and longitudinally similar to global reconstructions, though with much larger latitudinal variation. The largest deviations from a geocentric axial dipole (GAD) are observed during times of the highest intensities, in contrast to the usual assumption. These observations are consistent with the idea that PSV in the North Atlantic and elsewhere during the Holocene results from temporal oscillations of high latitude flux concentrations at a few recurrent locations.

Description: Patterns of past, present, and future sea level vary spatially, depending on how the solid Earth responds to the changing distribution of ice and ocean mass, known as glacial isostatic adjustment (GIA). Accurate interpretation of observational constraints on GIA requires dialogue between field scientists and researchers who reconstruct ice sheet geometries, infer Earth structure and rheology, and model the solid Earth response to loading.

Description: Fieldwork plays an important role in initiating students into the geoscience community of practice, providing learning opportunities not possible through classroom lectures, lab work, or computer exercises alone [ Mogk and Goodwin , 2012]. It's no wonder, then, that fieldwork is a mainstay of any well-balanced university geoscience program, with activities ranging from local field trips to in-residence field camps at remote sites.

Description: AGU members are invited to comment on proposed changes to AGU's bylaws. The updates reflect changes required by Washington, D. C., law and changes enacted by the AGU Board of Directors and Council during the transition in 2010–2012 to a new governance structure. Members can view and comment on the proposed changes at http://sites.agu.org/leadership/agu-bylaws-comment-period/ . The comment period is open until 18 November.

Description: It is a great pleasure for me to introduce Giuliano Di Baldassarre as the recipient of the AGU Hydrologic Sciences Early Career Award.

Description: Agricultural ecologist David Lobell is among the 2103 class of MacArthur Fellows, the MacArthur Foundation announced on 25 September. Lobell, an associate professor in Stanford University's Department of Environmental Earth System Science, is one of 24 people to win the “genius award” this year. The citation for Lobell notes that he “unearths and connects richly informative sources of data to investigate the impact of climate change on crop production and food security around the globe. His multidisciplinary background in remote sensing, statistics, ecosystem modeling, land use, and agronomy informs his approach and enables him to draw significant insights from enormous and diverse data sets on weather, agricultural practices, and natural resources such as soil and water.” Each MacArthur Fellow receives a no-strings-attached stipend of $625,000 over 5 years.

Description: Estimates of the recent decline in Arctic Ocean summer sea ice extent can vary due to differences in sea ice data sources, in the number of years used to compute the trend, and in the start and end years used in the trend computation. Compounding such differences, estimates of the relative decline in sea ice cover (given in percent change per decade) can further vary due to the choice of reference value (the initial point of the trend line, a climatological baseline, etc.). Further adding to the confusion, very often when relative trends are reported in research papers, the reference values used are not specified or made clear. This can lead to confusion when trend studies are cited in the press and public reports.

Description: The stability of the Amazon rainforest and the ecosystem's resilience to widespread deforestation may be much lower than previously thought. The replacement of stands of trees with grassland changes evapotranspiration rates and atmospheric moisture convergence, which, in turn, reduce regional rainfall. This feedback effect could drive further deforestation. Previous research indicated that a dramatic shift from forest to grassland could overtake the Amazon when the total deforested area hits 40% to 50% of the forest's current size. New research by Pires and Costa , however, found that the deforestation needed to trigger this equilibrium shift is much lower, closer to just 10%.

Description: In the western South Atlantic, off the coast of South America, a band of cold, fresh, nutrient-rich Sub-Antarctic Shelf Water (SASW) meets warm, salty, nutrient-poor Subtropical Shelf Water (STSW) to form the Subtropical Shelf Front (STSF). This front is the shallow-water expression of the major Brazil-Malvinas Confluence Zone and has moved northward and southward during the Holocene (the past ~12,000 years). Bender et al . reconstruct the latitudinal shifts of the STSF over the past 11,000 calendar-equivalent years using records of oxygen and carbon stable isotope compositions of benthic foraminifera and total organic carbon and calcium carbonate content from a sediment record collected off Uruguay. These measurements serve as proxies for ocean water temperature and nutrient content, which can be used to distinguish the SASW and STSW.

Description: The stability of the West Antarctic Ice Sheet is uncertain as climate changes. An ice sheet such as the West Antarctic Ice Sheet that is grounded well below sea level on a bed that slopes toward the interior of the sheet is believed to be unstable: When the grounding zone, where the grounded sheet transitions into floating ice, retreats inland, it can lead to massive amounts of ice becoming ungrounded and floating into the ocean unless something such as a wedge of sediment stabilizes the ice sheet. It has been proposed that such a sediment wedge stabilizes the grounding zone of the Whillans Ice Stream, one of the large ice streams flowing from the West Antarctic Ice Sheet. However, most understanding of ice sheet stability at grounding zones comes from models and remote observation rather than field-based observations.

Description: Particulate matter in the air, which can come from both natural and anthropogenic sources, can be detrimental to human health. Air quality standards in Europe and elsewhere regulate emission of air pollutants from human sources, but in some locations, particulate matter levels are still high. Among the natural factors that can influence particulate matter concentrations are large-scale atmospheric circulation patterns, such as the North Atlantic Oscillation (NAO). Understanding the relationship between NAO variability and particulate matter can help scientists understand particulate matter trends and potentially predict areas likely to be affected by pollution episodes. This is especially important because climate models suggest that the winter mean state of the NAO is likely to shift in coming years.

Description: Recent investigations have revealed the great potential of Raman spectroscopy for the characterization of clinker minerals and commercial Portland cements. The usefulness of this technique for the identification of anhydrous, hydrated, and carbonated phases in cement-based materials has been demonstrated. In the present work, the application of micro-Raman spectroscopy for the characterization of the main clinker phases of calcium aluminate cements and calcium sulfoaluminate cement is explored. The main stable hydrated phases as well as several important carbonated phases are investigated. Raman measurements on the following phases are reported: (i) pure, unhydrated phases: CA, C 12 A 7 , CA 2 , C 2 AS, cubic- C 3 A , C 4 AF, and C 4 A 3 ; (ii) hydrated phases: ettringite, monosulfoaluminate, and hydrogarnet ( C 3 AH 6 ); (iii) carboaluminate phases: hemicarboaluminate and monocarboaluminate. The present results, which are discussed in terms of the internal vibrational modes of the aluminate, carbonate, and sulfate molecular groups as well as stretching O–H vibrations, show the ability of Raman spectroscopy to identify the main hydrated and unhydrated phases in the aluminate and sulfoaluminate cements. The Raman spectra obtained in this work provide an extended database to the existing data published in the literature.

Description: Acmite ( NaFeSi 2 O 6 ) films were formed on steel coupons via solvothermal reaction of silica, sodium hydroxide, and 1, 4-butanediol in an autoclave under autogenous pressure. Systematic variation in processing variables led to homogenous coatings comprised of pinacoidal acmite grains with an average grain size of ~33 μm. The coatings were produced on the steel coupons from reactant conditions of 0.635 m SiO 2 , 2.546 m NaOH , and 3.087 m 1,4-butanediol for 72 h at 240°C.

Description: A 50:50 vol% MgO – Y 2 O 3 nanocomposite with ~150 nm grain size was prepared in an attempt to make 3–5 μm infrared-transmitting windows with increased durability and thermal shock resistance. Flexure strength of the composite at 21°C is 679 MPa for 0.88 cm 2 under load. Hardness is consistent with that of the constituents with similar grain size. For 3-mm-thick material at 4.85 μm, the total scatter loss is 1.5%, forward scatter is 0.2%, and absorptance is 1.8%. Optical scatter below 2 μm is 100%. Variable intensity OH absorption (~6% absorptance) is observed near 3 μm. The refractive index is ~0.4% below the volume-fraction-weighted average of those of the constituents. Thermal expansion is equal to the volume-fraction-weighted average of expansion of the constituents. Specific heat capacity is equal to the mass-fraction-weighted average of heat capacities of the constituents. Thermal conductivity lies between those of the constituents up to 1200 K. Elastic constants lie between those of the constituents. The Hasselman mild thermal shock resistance parameter for the composite is twice as great as that of common 3–5 μm window materials, but half as great as that of c -plane sapphire.

Description: Due to its massive air traffic impact, the 2010 eruption of Eyjafjallajökull was felt by millions of people and cost airlines more than U.S. $1.7 billion. The event has, thus, become widely cited in renewed efforts to improve real-time tracking of volcanic plumes, as witnessed by special sections published last year in Journal of Geophysical Research , ( 117 , issues D20 and B9).

Description: The National Oceanic and Atmospheric Administration (NOAA) and the European Organisation for the Exploitation of Meteorological Satellites (EUMETSAT) have agreed to continue their long-term cooperation on satellite-based weather monitoring. NOAA acting administrator Kathryn Sullivan and EUMETSAT director general Alain Ratier signed the agreement at a ceremony at the European Union Delegation in Washington, D. C., on 27 August.

Description: From May to July 2012, the Great Plains region of the western United States faced a powerful and unpredicted drought. Following 7 months of normal rainfall, the drought was one of the largest deviations from seasonal precipitation rates seen in the region since observations began in 1895. When such extreme events take place today against the backdrop of ongoing global climate change, they raise questions about the relationship between climate change and natural disasters.

Description: A binational research team met on the campus of Yunnan University in Kunming, China, to discuss recent progress and future plans to leverage binational support to address major questions on life in terrestrial geothermal systems. The symposium included about 90 faculty, postdocs, and students from China and about 30 faculty, postdocs, students, and high school teachers from the United States. The introductory session reviewed the progress of the Tengchong PIRE project funded by the U.S. National Science Foundation (NSF) Partnerships for International Research and Education (PIRE) program (OISE-0836450). It also introduced a new collaborative project funded as a Key Project of International Cooperation by the Chinese Ministry of Science and Technology (MOST, 2013DFA31980), which is the first project funded through a memorandum of understanding between NSF and MOST to promote China-U.S. collaboration.

Description: The conditions permitting mantle serpentinization during continental rifting are explored within 2D thermotectonostratigraphic basin models, which track the rheological evolution of the continental crust, account for sediment blanketing effects, and allow for kinetically controlled mantle serpentinization processes. The basic idea is that the entire extending continental crust has to be brittle for crustal scale faulting and mantle serpentinization to occur [ Perez-Gussinye and Reston , 2001]. The isostatic and latent heat effects of the reaction are fully coupled to the structural and thermal solutions. A systematic parameter study shows that a critical stretching factor exists for which complete crustal embrittlement and serpentinization occurs. Increased sedimentation rates shift this critical stretching factor to higher values as sediment blanketing effects result in higher crustal temperatures. Sediment supply has therefore, through the temperature-dependence of the viscous flow laws, strong control on crustal strength and mantle serpentinization reactions are only likely when sedimentation rates are low and stretching factors high. In a case study for the Norwegian margin we test whether the inner lower crustal bodies (LCB) imaged beneath the Møre and Vøring margin could be serpentinized mantle. Multiple 2D transects have been reconstructed through the 3D data set by Scheck-Wenderoth and Maystrenko [2011]. We find that serpentinization reactions are possible and likely during the Jurassic rift phase. Predicted thicknesses and locations of partially serpentinized mantle rocks fit to information on LCBs from seismic and gravity data. We conclude that some of the inner LCBs beneath the Norwegian margin may be partially serpentinized mantle.

Description: Recent observations show that the Sun's magnetic field is flipping, marking one of the weakest sunspot cycle maxima in recent history. Many consequences have been observed and are under study, from a significant diminishing of the upper atmosphere's density [ Solomon et al ., 2010] to record low levels of geomagnetic activity [ Richardson , 2013] to the large increase of local galactic cosmic ray fluxes starting in the preceding solar minimum [ Mewaldt et al ., 2010].

Description: I'm deeply honored to receive the Earth and Planetary Surface Processes G. K. Gilbert Award, in no small part because Gilbert's application of simple physical principles to Earth surface processes has always been an inspiration to me. My desire to study the transportation of debris by running water started a long time ago on our family farm, where re-engineering the local stream with a backhoe was a rewarding afternoon activity.

Description: Michael Lamb received the 2012 Luna B. Leopold Young Scientist Award at the 2012 AGU Fall Meeting, held 3–7 December in San Francisco, Calif. The award recognizes “a young scientist for making a significant and outstanding contribution that advances the field of Earth and planetary surface processes.”

Description: It is my pleasure to be a part of the exciting community of Earth and planetary surface processes. In addition to the opportunities to participate in engaging and fundamental science, I enjoy our field because of collaborations with bright and fun people. In my short career I have had the pleasure to work with a number of colleagues, and I share this award with you.

Description: Climate models generally show that when a massive volcano erupts, scattering reflective aerosols across the globe, the planet's temperature declines for up to a few years. However, when researchers look at reconstructed temperature records built on annual tree ring measurements, this volcanic cooling often appeared much weaker than expected or was nonexistent. In a new study reanalyzing regional tree ring growth records, Mann et al . provide a possible explanation for the absence of the cooling effect.

Description: Tree ring records are often used as a proxy for past climate. Trees form a new growth ring each year, and ring widths are related to temperature and other conditions at cold sites. Some recent studies have noted that tree ring width chronologies and resulting climate reconstructions do not appear to show the widespread cooling in the past millennium that would be expected following large volcanic eruptions. One hypothesis suggests that regional cooling after a volcanic eruption could be so severe that many trees do not form a ring at all, which leads researchers to misdate the tree ring chronology.

Description: In the Luzon Strait, which lies between the Philippines and Taiwan and connects the western Pacific Ocean and the South China Sea, ridges extending along the ocean bottom generate large internal tides—waves with a tidal frequency within the ocean, not on its surface—that propagate into the South China Sea and the Pacific Ocean.

Description: In this work, novel Y 2 Si 2 O 7 / ZrO 2 composites were developed for structural and coating applications by taking advantage of their unique properties, such as good damage tolerance, tunable mechanical properties, and superior wear resistance. The γ- Y 2 Si 2 O 7 / ZrO 2 composites showed improved mechanical properties compared to the γ- Y 2 Si 2 O 7 matrix material, that is, the Young's modulus was enhanced from 155 to 188 GPa (121%) and the flexural strength from 135 to 254 MPa (181%); when the amount of ZrO 2 was increased from 0 to 50 vol%, the γ- Y 2 Si 2 O 7 / ZrO 2 composites also presented relatively high facture toughness (〉1.7 MPa·m 1/2 ), but this exhibited an inverse relationship with the ZrO 2 content. The composition–mechanical property–tribology relationships of the Y 2 Si 2 O 7 / ZrO 2 composites were elucidated. The wear resistance of the composites is not only influenced by the applied load, hardness, strength, toughness, and rigidity but also effectively depends on micromechanical stability properties of the microstructures. The easy growth of subcritical microcracks in Y 2 Si 2 O 7 grains and at grain boundaries significantly contributes to the macroscopic fracture toughness, but promotes the pull-out of individual grains, thus resulting in a lack of correlation between the wear rate and the macroscopic fracture toughness of the composites.

Description: The as-prepared BiFeO 3 ceramic shows a piezoelectric d 33 coefficient of −14 pC/N, that is, an obvious ferroelectric self-poling phenomenon. The temperature gradient between the two surfaces of BiFeO 3 ceramic was intentionally enlarged when BiFeO 3 was prepared with a rapid liquid sintering method. This temperature gradient and the corresponding thermal strain can introduce defect dipoles through separating bismuth vacancies from oxygen vacancies. A mass of these dipoles introduce a macroscopic internal electric field ( E in ) which downward poles BiFeO 3 ceramic during its cooling down process. As expected, an E in of 〉10 kV/cm is confirmed by the asymmetrical polarization/strain versus electric field curves.

Description: The effect of Ba content on the stress sensitivity of the antiferroelectric to ferroelectric phase transition in ( Pb 0.94− x La 0.04 Ba x )[( Zr 0.60 Sn 0.40 ) 0.84 Ti 0.16 ] O 3 ceramics is investigated through monitoring electric field-induced polarization and longitudinal strain under compressive prestresses. It is found that incorporation of Ba significantly suppresses the stress sensitivity of the phase transition, as manifested by slight decreases under prestresses up to 100 MPa in the maximum polarization ( P m ) and longitudinal strain ( x m ). The energy storage density is even increased under the mechanical confinement in compositions x  = 0.02 and 0.04. X-ray diffraction, transmission electron microscopy, and dielectric measurements indicate that the suppressed stress sensitivity is associated with the disruption of micrometersized antiferroelectric domains into nanodomains and the transition from antiferroelectric to relaxor behavior.

Description: Powders and nanoceramics composed of composites of CoFe 2 O 4 , CoFe 2 , and a small amount of FeO were prepared by heating CoFe 2 O 4 powder in reducing atmosphere and by sintering the product of reducing reaction at 350°C via spark plasma sintering technology. In the powders, increase in the molar ratios of CoFe 2 : CoFe 2 O 4 and a great change in magnetic parameters were observed with the change in heating temperature from 300°C to 400°C, and the dominance of dipole interaction over exchange coupling in the interparticle interactions was confirmed by the steps in magnetic hysteresis loops and the negative Henkel plots. However, in the nanoceramics, significant enhancement in exchange coupling was found when the sintering temperature was raised to 500°C and 650°C, which was confirmed by both the positivity of Henkel plot and the single-phase style of the magnetic hysteresis loop.

Description: Gas adsorption porosity measurement of geopolymers (GPs) is required for quantitative understanding of such mesoporous structures, but the complex nature of the GP system makes analysis difficult. Previous results in the literature are often ambiguous or contradictory. A systematic investigation of metakaolin GP gas adsorption results was conducted to optimize the use of this measurement technique and verify that results match known theory about GP structure. It was found that GP undergoes structural change upon degassing at 100°C or higher. If and only if this change is prevented by degassing at a lower temperature could it be shown that specific surface area and total gas adsorption increases with both increasing curing temperature and decreased Si : Al ratio. This observation is consistent with previous suggestions of increased zeolitic character under these conditions, where previous gas adsorption investigations had not observed this expected relationship. Hydrogen physisorption is proposed as a substitute technique for micropore isotherms in GPs due to the difficulty of removing trace gasses from GPs and the measurement effect of such gasses at high vacuum. A hydrogen physisorption isotherm qualitatively resembled an equivalent nitrogen micropore isotherm.

Description: For the past few decades the upper reaches of Earth's atmosphere have been cooling much faster than researchers anticipated. While the rising atmospheric concentration of carbon dioxide is heating the air near the ground, that same increase is expected to cool the thermosphere—the atmospheric band that stretches from around 80 kilometers altitude to the exosphere at 500 kilometers—by emitting heat into space. However, while carbon dioxide should theoretically cool the thermosphere by around 2 kelvins per decade, the observed cooling was around 10 times this rate. Building on recent theoretical and modeling work, Oliver et al . lay out a mechanism that could explain the observed cooling.

Description: “We made it,” Voyager project scientist Ed Stone announced at a 12 September briefing at NASA headquarters in Washington, D. C. NASA's Voyager 1 spacecraft, the most distant human-made object, is now the first such object to enter interstellar space, the space between the stars. “The 36-year-old probe is now sailing the uncharted waters of a new cosmic sea, and it has brought us along for the journey,” Stone said.

Description: In the 23 July 2013 issue of Eos , we provided a broad update on recent events in AGU publishing, focusing on the partnership with John Wiley & Sons ( Eos , 94 (30), 264–266, doi:10.1002/2013EO300009). Here we briefly comment on the latest developments in the partnership, but the main focus is on recent events regarding open access as it relates to AGU publishing.

Description: In this work, the role of europium doping of glasses formulated in the ternary system ZnO – CdO – TeO 2 is described. The Eu -doped oxide glasses were prepared by the conventional melt-quenching method and by using three different compositions. Structural studies reveal that there exists a good affinity between Cd and some rare earth (RE) ions to form the crystalline phase. The X-ray diffraction (XRD) diagrams display that the structure of these glasses is amorphous and with the increase in CdO content and the compatibility of Eu 3+ , there is a tendency to form nanocrystals of CdTe 2 O 5 . The scanning electron microscopic (SEM) observation of their microstructure confirms the presence of phase separation. Differential thermal analysis (DTA) of these glasses showed small exothermic peaks noted around 450°C for the V2 glass and 480°C for V1 and V3 glasses, which could be attributed to the formation of these crystals. The infrared spectra showed a main absorption band around 800–600 cm −1 corresponding to the Te – O stretching mode in TeO 4 and TeO 3 groups. By optical absorption (OA), the band gap ( E g ) for each glass was determined; these values were 3.27, 3.14, and 3.3 eV for the V1–V3 glasses, respectively. Furthermore, the presence of Eu 3+ was detected in the 370–470 nm short-range wavelengths. The photoluminescence (PL) experiments of the glasses showed light emission due to the following transitions: 5D0 → 7F1, 5D0 → 7F2, 5D0 → 7F3, and 5D0 → 7F4.

Description: Given today's enormous management and protection challenges related to the world's oceans, a new competition calls on ocean scientists to effectively communicate their research in videos that last up to 3 minutes. The Ocean 180 Video Challenge, named for the number of seconds in 3 minutes, aims to improve ocean science communication while providing high school and middle school teachers and students with new and interesting educational materials about current science topics.

Description: Earth's nighttime environment is being revealed in unprecedented detail by the new satellite-mounted Visible/Infrared Imaging Radiometer Suite (VIIRS). VIIRS' Day/Night Band (DNB) is a highly sensitive broadband visible channel capable of detecting light from cities and other terrestrial emission sources.

Description: Thank you very much, Alberto, for your nice comments and the precious support you have given me since the very beginning of my scientific career.

Description: AGU has created a new award that honors members whose achievements extend beyond those recognized by traditional scientific discipline awards. The award furthers AGU's strategic goals to promote collaboration and innovation, inform society about Earth and space science, and build the global talent pool.

Description: I am delighted to present Professor Gabriel Katul of Duke University with the 2012 Hydrologic Sciences Award. He has made massive contributions to the understanding and prediction of hydrology, and it is for his work that we (Professors Poporato, Hornberger, Rinaldo, Rodriguez-Iturbe, Brutsaert, and Raupach) nominated him.

Description: Space weather can affect satellite performance and cause “anomalies,” unexplained problems ranging from a minor temporary glitch to a complete failure of a component. Understanding these effects requires looking at the relationship between space weather conditions and anomalies. However, data on commercial satellite anomalies have not often been made available for scientists to study.

Description: Dust, which affects weather and climate and can be hazardous to health, can be generated when sand or silt grains are either dislodged from the surface by other windblown grains (saltation) or lifted by wind directly (direct entrainment). Direct entrainment of silt has been thought to generate only minimal quantities of dust, and atmospheric models that include dust usually assume that dust generation occurs through saltation.

Description: Thank you, Marc, for the kind comments and unwavering support as a mentor and friend. I am honored by this award, which I share with many people.

Description: When scientists confirmed on 12 September that NASA's Voyager 1 spacecraft had entered interstellar space ( Eos, 94 (39), 339, doi:10.1002/2013EO390003), the probe was acknowledged as the first human-made object to travel into that realm. The probe and its twin, Voyager 2, each carry a 12-inch gold-plated copper disk, known as the Golden Record.

Description: Humans are now the dominant driver of global climate change. From ocean acidification to sea level rise, changes in precipitation patterns, and rising temperatures, global warming is presenting us with an uncertain future. However, this is not the first time human civilizations have faced a changing world. In the AGU monograph Climates, Landscapes, and Civilizations, editors Liviu Giosan, Dorian Q. Fuller, Kathleen Nicoll, Rowan K. Flad, and Peter C. Clift explore how some ancient peoples weathered the shifting storms while some faded away. In this interview , Eos speaks with Liviu Giosan about the decay of civilizations, ancient adaptation, and the surprisingly long history of humanity's effect on the Earth .

Description: The conductivity of nominal CaWO 4 , CaW 0.99 Ta 0.01 O 4–δ , 0.7( CaWO 4 )–0.3( La 0.99 Ca 0.01 NbO 4–δ ), and Ca 0.9 La 0.1 WO 4+δ has been studied by means of a.c. impedance measurements. Proton conductivity was observed for CaW 0.99 Ta 0.01 O 4–δ , which displayed exothermic hydration with enthalpy and entropy of –82 kJ/mol and –120 J/molK, respectively. The proton mobility in CaW 0.99 Ta 0.01 O 4–δ was low, with enthalpy and preexponential factor of mobility of 82 kJ/mol and 0.7 cm 2 K/Vs. The high enthalpy of mobility is interpreted to reflect association between the acceptor dopant and protonic defects, whereas the low preexponential factor of mobility may reflect a lower proton concentration than assumed. Rietveld refinement indicated low solubilities of La on Ca -site and Ta on W-site. Proton conductivity was also observed in undoped CaWO 4 , however, not in Ca 0.9 La 0.1 WO 4+δ . The conductivity of 0.7( CaWO 4 )–0.3( La 0.99 Ca 0.01 NbO 4–δ ) behaved much like that of undoped LaNbO 4 , likely due to a very low acceptor dopant concentration.

Description: A new lead-free BNT-based piezoelectric ceramics of (1 −  x ) Bi 0.5 Na 0.5 TiO 3 – x Bi ( Al 0.5 Ga 0.5 ) O 3 ( x  = 0, 0.02, 0.03, 0.04, and 0.05) were synthesized using a conventional ceramic fabrication method. Their structures and electrical properties were investigated. All the samples show a typical ferroelectric P ( E ) loops and S ( E ) curves at room temperature. The optimal properties are obtained at the composition of the x  = 0.03. The substitution of Bi ( Al 0.5 Ga 0.5 ) O 3 enhances piezoelectric constant and increases Curie temperature from 58 pC/N and 310°C of pure BNT to 93 pC/N and 325°C of the x  = 0.03. The temperature-dependent P ( E ) loops and S ( E ) curves of 0.97BNT–0.03BAG indicate that phase transition from ferroelectric to antiferroelectric takes place over a very wide temperature region from 80°C to 180°C. The results show that the introduction of BAG improves the electrical properties of BNT.

Description: The origin of the Bermuda swell and volcanism remains enigmatic. The lack of an associated time-progressive hotspot track and absence of present-day volcanic activity make it difficult to reconcile with a deep mantle plume model. We analyze shear wave splitting measurements to estimate mantle flow direction and receiver function stacks to place constraints on the mantle transition zone thermal structure. *KS phases exhibit well-resolved null arrivals (no splitting) beneath the swell over a range of back azimuths. We find that the 410 and 660 km discontinuities are 49 ± 5 km and 19 ± 5 km deeper than the global average, respectively, leading to a transition zone thickness that is 27 ± 4 km thinner than average. Together, an apparently isotropic upper mantle and a thinned mantle transition zone suggest that mantle flow is primarily vertical beneath the swell, consistent with the presence of hot, buoyant mantle at depth.

Description: We present an improved density model and a new structural map of the Neapolitan Yellow Tuff caldera, the active portion of the nested Campi Flegrei caldera. The model was built using a new 3D inversion of the available high-precision gravity data, and a new digital terrain and marine model. The inversion procedure, based on a variable-depth lumped assembling of the subsurface gravity distribution via cell aggregation, gives better defined insights into the internal caldera architecture, that well agree with the available geological, geophysical and geochemical data. The adopted 3D gravity method is highly efficient for characterizing the shallow caldera structure (down to 3 km depth) and defining features related to regional or volcano tectonic lineaments and dynamics. In particular, the resulting density distribution highlights a pronounced density low in correspondence of the central portion of the caldera with a detail not available till now. The joint interpretation of the available data, suggests a subsurface structural setting that supports a piecemeal collapse of the caldera, and allows the identification of its headwall. Positive gravity anomalies localize dense intrusions (presently covered by late volcanic deposits) along the caldera marginal faults, and the main structural lineaments both bordering the resurgent block and cutting the caldera floor. These results allow us to both refine the current geological-structural framework and propose a new structural map that highlights the caldera boundary and its internal setting. This map is useful to interpret the phenomena occurring during unrest, and to improve both short- and long-term volcanic hazards assessment.

Description: Catastrophic collapses of submarine volcanoes have the potential to generate major tsunami, threatening many coastal populations. Recognizing the difficulties surrounding anticipations of these events, quantitative assessment of collapse-prone regions based on detailed morphological, geological and geophysical mapping can still provide important information about the hazards associated with these collapses. Rumble III is one of the shallowest, and largest, submarine volcanoes found along the Kermadec arc, and is both volcanically and hydrothermally active. Previous surveys have delineated major collapse features at Rumble III; based on time-lapse bathymetry, dramatic changes in the volcano morphology have been shown to have occurred over the interval 2007 to 2009. Furthermore, this volcano is located just ˜300 km from the east coast of the North Island of New Zealand. Here, we present a geophysical model for Rumble III, that provides the locations and sizes of potential weak regions of this volcano. Shipborne and near-seafloor geological and geophysical data collected by the AUV Sentry are used to determine the subsurface distribution of weak and unstable volcanic rocks. The resulting model provides evidence for potentially unstable areas located in the Southeastern flank of this volcano which should be included in future hazard predictions.

Description: Broadband seismic experiments over the last two decades have produced dense data coverage across Tibet. Yet, the mechanism of the India-Asia lithospheric convergence beneath it remains a puzzle, with even its basic features debated and with very different end-member models advocated today. We measured highly accurate Rayleigh- and Love-wave phase-velocity curves in broad period ranges (up to 5-200 s) for a few tens of pairs and groups of stations across Tibet, combining, in each case, hundreds to thousands of inter-station measurements made with cross-correlation and waveform-inversion methods. Robust shear-velocity profiles were then determined by extensive series of non-linear inversions of the data, designed to constrain the depth-dependent ranges of isotropic-average shear speeds and radial anisotropy. Temperature anomalies in the upper mantle were estimated from shear velocities using accurate petro-physical relationships. Our results reveal strong heterogeneity in the upper mantle beneath Tibet. Very large high-velocity anomalies in the upper mantle are consistent with the presence of underthrust (beneath southwestern Tibet) and subducted (beneath central and eastern Tibet) Indian lithosphere. The lithosphere. In contrast to the Indian lithosphere, Tibetan lithosphere and asthenosphere display low to normal shear speeds; Tibetan lithosphere is thus warm and thin. Radial anisotropy in the upper mantle is weak in central and strong in northeastern Tibet, possibly reflecting asthenospheric flow above the subducting Indian lithospheric slab.

Description: The Pacific Northwest (PNW) has experienced voluminous intraplate volcanism over the past ~17 Ma, beginning with the Steens/Columbia River flood basalts and continuing with the still-ongoing volcanism in the High Lava Plains (HLP) and eastern Snake River Plain (SRP). Here we present two complementary datasets (SKS splitting and Rayleigh wave phase velocity anisotropy) that place constraints on the anisotropic structure of the upper mantle beneath the HLP and SRP regions. Beneath the HLP, SKS phases reveal dominantly E-W fast splitting directions and large (up to ~2.7 sec) delay times, with pronounced lateral variations in δ t . Lateral and depth variability in the strength of anisotropy beneath the HLP is also evident from Rayleigh wave dispersion. Beneath the SRP, SKS splitting delay times are much smaller (~0.5 sec) and surface wave observations suggest a region of upper mantle anisotropy (~50-150 km depth) with a geometry that deviates significantly from the generally plate motion parallel fast directions observed just outside of the SRP. Beneath the HLP, the geometry of the anomalously strong anisotropy is similar to the anisotropy in the deeper parts of the upper mantle, resulting in constructive interference and large SKS splitting delay times. Beneath the SRP, the geometry of the anomalous anisotropic region in the shallow mantle is different, resulting in destructive interference and reduced SKS splitting delay times. We discuss several possible explanations for these observations, including variations in olivine lattice preferred orientation (LPO) strength, transitions in olivine fabric type, and a contribution from aligned partial melt.

Description: We studied ancient enamels on gilded copper from a collection of archeological horse harness pendants of the Museo Instituto Valencia de Don Juan (Madrid, Spain) to test the benefits of a new, nondestructive analytical methodology based on chemometric analysis (i.e., Principal Component Analysis, PCA) on micro-ATR-FTIR spectral data and chemical quantification using SEM-EDS. The novelty of this approach was threefold: (i) PCA allowed the discrimination of the different harness pendants of known origin and attributed to the 14th and 15th centuries according to the chemical complex composition, nanostructure, glass weathering, and/or coloring mechanisms of each colored enamel, separately (i.e., red, purple, blue, and white), (ii) it is a cheap, easily available and nondestructive methodology that enables us to (iii) draw archeological conclusions about the quality of the manufacturing process, reassess the chronology of these objects and attempt to attribute them to different workshops according to the different traditional recipes identified. In particular, the enamels were made of alkali and/or alkaline earth lead-glass with a wide range of chemical compounds in the form of pigments or opacifiers. Two types of coloring mechanisms were identified, colloidal particles such as copper-ruby for red enamels, and ionic mechanisms such as Fe (II) and Co (II) to achieve a blue pigments; Mn (III) in the purple pigment; and two kind of white enamels were identified, i.e., tin oxide as an opacifier and uranium oxide. In addition, we established the reason for the poor state of conservation of some of the enamels by means of the identification of depolymerization and ion exchanges, well-known harmful effects of glass weathering, and finally a chronology was assigned for some of these pieces according to the enamel composition.

Description: Novel glass-ceramics with embedded thermoelectric Bi 2 Se 3 crystals were prepared from glass matrices in the Ge 20 Se 100− x Bi x ( x  = 5, 10, 12 mol%) system. Based on DSC results performed at different heating rates, characteristic activation energies ( E c ) and Avrami exponents ( n ) were obtained and analyzed by using Kissinger's relation, Ozawa's method, Augis–Bennett approximation and Matusita–Sakka theory. XRD results showed that pure Bi 2 Se 3 crystalline phase precipitated upon annealing at different temperatures for various time. The crystal size and crystalline fraction in the samples could be tuned by controlling the annealing time.

Description: In the present investigations nano size high alumina cements (HAC) were prepared by very effective co-melt precursor sintering technique from their metal nitrate precursors. The prime cementing phases observed were CA, CA 2 , and C 12 A 7 . The addition of nano structured cements in refractory castables has improved the thermo-chemical-mechanical properties to a significant extent. Each batch of low cement castables (LCC) was prepared from calcined Chinese bauxite, HAC, and superfine additives. The effect of HAC in bauxite castable with the additives similar to Silicon Carbide, reactive alumina, and micro-fine silica on the sinterability and properties of these castables was investigated. Physical properties such as apparent porosity and bulk density, mechanical properties such as hot modulus of rupture (HMOR), cold and hot modulus of rupture (CMOR), and cold crushing strength (CCS) of hydrated and sintered castables were studied. The sintered castables were also characterized for their solid phase compositions and microstructure using X-ray diffraction (XRD) and FE-SEM, respectively. In the castables new phases such as mullite, α-alumina were formed at the expense of bauxite and silica. Solid solution of mullite formed at high temperature acts as a bonding phase and is accounted for high HMOR, CMOR, and CCS values. These excellent properties of such castables may enable their uses in various applications such as refractory lining for fabrication of steel, aluminium, copper, glass, cement, chemicals, and ceramics.

Description: The bulk composition of the silicate portion of the Earth (BSE) has long been assumed to be tied to chondrites, in which refractory, lithophile elements like Sm and Nd exist in chondritic relative abundances. However, the 142 Nd/ 144 Nd ratios of modern terrestrial samples are 18±5 ppm higher than the ordinary-chondrite reservoir, and this challenges the traditional BSE model. Here we investigate a hypothesis that this terrestrial 142 Nd excess is related to a Sm/Nd ratio 6% higher than chondritic. This Sm/Nd ratio yields a superchondritic 143 Nd/ 144 Nd (~0.5130) similar to that identified in the highest 3 He/ 4 He mantle reservoir, and we argue that this reservoir represents the BSE composition for lithophile elements. We develop a compositional model for BSE in which the elevated Sm/Nd requires a shift of 143 Nd/ 144 Nd from 0.51263 (chondritic) to 0.51300. The new BSE composition is depleted in highly incompatible elements, including K, relative to the chondrite-based BSE, and offers a solution the “missing” 40 Ar paradox. This BSE compositional model requires that 〉83% of the mantle is depleted to form continental crust. It also implies a ~30% reduction in BSE U, Th and K, and therefore in the current rate of radiogenic heating and, thus, a proportional increase in the heat flow delivered to surface by plate tectonics. We explore thermal history models including effects related to a newly recognized evolution in the style of plate tectonics over Earth history: The lower radiogenic heat production may delay the onset of core convection and dynamo action to as late as 3.5 Gyr.

Description: The internal geological structure of the Northeast German Basin (NEGB) is affected by intense salt diapirism and by the presence of several stratified aquifer complexes of regional relevance. The shallow Quaternary to late Tertiary freshwater aquifer is separated from the underlying Mesozoic saline aquifers by an embedded Tertiary clay enriched aquitard (Rupelian Aquitard). An important feature of this aquitard is that hydraulic connections between the upper and lower aquifers do exist in areas where the Rupelian Aquitard is missing (hydrogeological windows). Three-dimensional thermohaline numerical simulations are carried out to investigate the effects of such hydrogeological windows in the Rupelian Aquitard on the resulting groundwater, temperature and salinity distributions. Numerical results suggest that hydrogeological windows act as preferential domains of hydraulic interconnectivity between the different aquifers at depth, and enable vigorous heat and mass transport which causes a mixing of warm and saline groundwater with cold and less saline groundwater within both aquifers. In areas where the Rupelian Aquitard confines the Mesozoic aquifer, dissolved solutes from major salt structures are transported laterally giving rise to plumes of variable salinity content ranging from few hundreds of meters to several tens of kilometers. Furthermore, destabilizing thermal buoyancy forces may overwhelm counteracting stabilizing salinity induced forces offside of salt domes. This may result in buoyant upward groundwater flow transporting heat and mass to shallower levels within the same Mesozoic Aquifer.

Description: Zn 2 GeO 4 ceramic materials were synthesized by the solid-state method. Zn 2 GeO 4 powders were investigated with X-ray powder diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM). Oxygen defects in the Zn 2 GeO 4 ceramics were investigated by photoluminescence, Raman, and EDS spectra. Conductivity of Zn 2 GeO 4 was 0.18 S/cm at low temperature of 773 K, and its activation energy was 0.49 eV. The results showed that Zn 2 GeO 4 was a promising low-temperature electrolyte with high conductivity.

Description: Long continuous seismic data recorded at five broadband seismic stations during 2006 at Campi Flegrei caldera have been analyzed. Introducing a coarse-grained method, we evaluate the time evolution of amplitude and polarization of the seismic noise in the frequency band common to Long-Period events. The series are modulated on tidal time scales: the root-mean square is basically dominated by solar contribution, while the azimuth of the polarization vector shows lunar diurnal and semidiurnal constituents. In addition, we find that in the frequency band common to Long-Period events the azimuths are polarized towards a specific area, suggesting that these persistent oscillations can be induced by the activity of the shallow geothermal reservoir.

Description: We report on the mineralogical assemblages found in the hyper-alkaline springs hosted on Liguria and Oman ophiolites based on exhaustive XRD and SEM analyses. In Liguria, hyper-alkaline springs produce a thin brownish calcite precipitate that covers the bedrock due to the concomitant atmospheric CO 2 uptake and neutralization of the hyper-alkaline waters. No brucite and portlandite minerals are observed. The discharge of alkaline waters in Oman ophiolite forms white-orange precipitates. Calcium carbonate minerals (calcite and/or aragonite) are the most abundant and ubiquitous precipitates and are produced by the same mechanism as in Liguria. This process is observed as a thin surface crust made of rhombohedral calcite. Morphological features of aragonite vary from needle-, bouquet-, dumbbell-, spheroidal-like habitus according to the origin of carbon, the temperature and the ionic composition of the hyper-alkaline springs, and the biochemical and organic compounds. Brucite is observed both at hyper-alkaline springs located at the thrust plane and at the paleo-Moho. The varying mixing proportions between the surface run-off waters and the hyper-alkaline ones control brucite precipitation. The Layered Double Hydroxide minerals occur solely in vicinity of hyper-alkaline springs emerging within the bedded gabbros. Finally, the dominant mineralogical associations we found in Oman (Ca-bearing carbonates and brucite) in a serpentinizing environment driven by the meteoric waters are surprisingly the same as those observed at the Lost City hydrothermal site in a totally marine environment.

Description: This article details the influence of zirconium doping on the piezoelectric properties and relaxor characteristics of 94( Bi 1/2 Na 1/2 ) TiO 3 –6 Ba ( Zr x Ti 1− x ) O 3 (BNT–6BZT) bulk ceramics. Neutron diffraction measurements of BNT–6BZT doped with 0%–15% Zr revealed an electric-field-induced transition of the average crystal structure from pseudo-cubic to rhombohedral/tetragonal symmetries across the entire compositional range. The addition of Zr up to 10% stabilizes this transition, resulting in saturated polarization hysteresis loops with a maximum polarization of 40 μC/cm 2 at 5.5 kV/mm, while corresponding strain hysteresis measurements yield a maximum strain of 0.3%. With further Zr addition, the ferroelectric order is progressively destabilized and typical relaxor characteristics such as double peaks in the current density loops are observed. In the strain hysteresis, this destabilization leads to an increase of the maximum strain by 0.05%. These changes to the physical behavior caused by Zr addition are consistent with a reduction of the transition temperature T F-R , above which the field-induced transformation from the relaxor to ferroelectric state becomes reversible.

Description: Precursor glasses for the ferroelectric barium bismuth titanate ( BaBi 4 Ti 4 O 15 ) (BBiT) have been prepared by the melt-quench technique in the SiO 2 – K 2 O – BaO – Bi 2 O 3 – TiO 2 (SKBBT) glass system with and without Eu 2 O 3 doping. BBiT glass–ceramic (GC) nanocomposites have been derived from these glasses by controlled heat treatment. The structural properties of the GCs have been investigated using X-ray diffraction (XRD), electron microscopy (FE-SEM, TEM), and FT-IR reflectance spectroscopy. FE-SEM images show the formation of randomly oriented hexagonal rod-shaped crystals of 200–400 nm and TEM images show 10–20 nm crystallites. FT-IR spectra exhibit the characteristic bands of BBiT at 480, 585, and 680 cm −1 . The activation energy of crystallization ( E c ) varies from 295 to 307 kJ/mol. The dielectric constants (ε r ) of glass and GC nanocomposites increase with an increase in frequency up to 3.0 MHz and then decrease up to 5.0 MHz. Heat-treated GCs show higher ε r values, in the range 25–55, compared to the precursor glasses (20–37). Dielectric losses (tan δ) for all the samples increase from 0.005 to 1.0 with an increase in frequency from 100 Hz to 5.0 MHz. Excitation spectra were recorded by monitoring emission at 613 nm corresponding to the 5 D 0 → 7 F 2 transition. An intense 466 nm excitation band corresponding to the 7 F 0 → 5 D 2 transition was observed. Emission spectra were then recorded by exciting the glass samples at 466 nm. Longer heat-treatment times led to a 15-fold increase in the intensity of the red emission at 612 nm, attributed to the segregation of Eu 3+ ions into the low phonon energy BBiT crystallites. The hardness (3.8–5.1 GPa) and fracture toughness (1.8–3.5 MPam 0.5 ) values obtained in the GCs are high and suitable for structural applications.

Description: Carbon doping is known to be very effective for enhancing the high-field properties of magnesium diboride, MgB 2 , but not for the low-field properties. Here, we report that both the high- and the low-field properties can be improved simultaneously without doping by increasing the initial magnesium partial pressure, by simply reducing the size of the magnesium particles. It is shown that in situ processed bulk MgB 2 sintered with fine magnesium powders has superior superconducting properties compared with a bulk sample fabricated using coarse magnesium lumps. The change in the lattice parameters was almost negligible; however, a clear increase in lattice strain can be observed for the sample sintered with fine magnesium powders. The increase in the lattice strain results in an enhancement of the high-field properties. Furthermore, it has also been found that the low-field critical current density is not reduced, but rather slightly increased for the fine magnesium powder sample. This is due to a closer linkage among the grains that drastically improves grain connectivity. These findings demonstrate that the initial growth mechanism of MgB 2 is very crucial for its superior superconducting properties, and it especially indicates the importance of magnesium vapor pressure.

Description: Revisiting classic phase diagrams and chemical phase relations in the solid state of a very well-studied oxide system, such as the lithium aluminosilicate (LAS) system, can open a new window for the design of new advanced materials with improved properties. Crystal chemistry and phase equilibria are used to demonstrate the ability to design materials with particular desired properties in the alumina-rich corner of the LAS phase diagram. The experimental results demonstrate the alumina and β-eucryptite solid-state compatibility.

Description: This work reports the crystallization, microstructure, and surface composition of Cu In 0.7 Ga 0.3 Se 2 (CIGS) thin films grown by femtosecond pulsed laser deposition at different annealing temperatures. The structural and optical properties of the CIGS films were characterized by X-ray diffraction, Raman scattering, UV-visible spectroscopy, and Hall effect measurement. The results indicate that binary crystals of CuS e initially formed on the as-deposited film, but then completely turned into a quaternary chalcopyrite structure after annealing at 400°C. Phase transformation significantly affects the surface morphology, Hall properties, and band gap. Transmission electron microscopy further revealed that an interface between the Mo substrate and CIGS crystallites contains an amorphous layer even at the high temperature of 500°C. For the application of photovoltaic devices, we also report on the photoresponse of both as-deposited and annealed films as demonstrated by preliminary tests.

Description: Reactive sintering of 3 Ti : Sn :2 C and 3Ti:Sn:2C:0.6Fe powder mixtures is studied in the temperature range 510°C–1200°C under argon. It is demonstrated that the recently discovered Ti 3 SnC 2 phase is formed, provided that Fe is added to a 3 Ti : Sn :2 C reactant mixture within the synthesis conditions used. Using dilatometric and X-Ray diffraction analyses, the formation mechanism of Ti 3 SnC 2 is discussed. Results show that at low temperature (about 510°C), tin is consumed to form Fe x Sn y intermetallics. At high temperature (about 1060°C), tin is newly available to form Ti 3 SnC 2 due to the melting of Fe x Sn y . Then, the intermediate phases, TiC and Ti 2 SnC , and/or Ti 5 Sn 3 , TiC , C , and Ti are dissolved in the ( Fe  +  Sn ) liquid phase and Ti 3 SnC 2 very likely precipitate from the melt. The second part of the study deals with the optimization of the Fe content in the initial 3Ti:Sn:2C reactant powder mixture to synthesize samples with larger Ti 3 SnC 2 content by hot isostatic pressing.

Description: The effects of non-stoichiometry on the microstructure, oxygen vacancies, and piezoelectric properties of ( Na 0.5 K 0.5 ) x NbO 3 (NK x N, where x  =   0.98, 1.00, 1.01, and 1.02) ceramics doped with sintering aid CuTa 2 O 6 (CT) doping were investigated. X-ray diffraction (XRD) patterns indicated that a secondary phase formed in CT-doped NK x N (NK x NCT) ceramics with x  〈   1.00 and that a pure phase was obtained with x  ≥   1.00. The grain size of NK x NCT ceramics increased with increasing x value due to the formation of a liquid phase. The internal bias field, activation energy, and Raman analysis for NK x NCT ceramics showed that the number of induced oxygen vacancies increased with decreasing x value. The high mechanical quality factor ( Q m ) value obtained for NK x NCT ceramics did not correspond to a higher concentration of oxygen vacancies, illustrating that the suitable compensation (excess Na and K ) is more important than the concentration of oxygen vacancies to obtain the ceramics with high Q m values. The NK x NCT ceramics with x  =   1.01 exhibited excellent piezoelectric properties, with k p and Q m values of 39.9% and 2,070, respectively.

Description: Low-temperature sintering of β-spodumene ceramics with low coefficient of thermal expansion (CTE) was attained using Li 2 O – GeO 2 sintering additive. Single-phase β-spodumene ceramics could be synthesized by heat treatment at 1000°C using highly pure and fine amorphous silica, α-alumina, and lithium carbonate powders mixture via the solid-state reaction route. The mixture was calcined at 950°C, finely pulverized, compacted, and finally sintered with or without the sintering additive at 800°C–1400°C for 2 h. The relative density reached 98% for the sample sintered with 3 mass% Li 2 O – GeO 2 additive at 1000°C. Its Young's modulus was 167 GPa and flexural strength was 115 MPa. Its CTE (from R.T. to 800°C) was 0.7 × 10 −6  K −1 and dielectric constant was 6.8 with loss tangent of 0.9% at 5 MHz. These properties were excellent or comparative compared with those previously reported for the samples sintered at around 1300°C–1400°C via melt-quenching routes. As a result, β-spodumene ceramics with single phase and sufficient properties were obtained at about 300°C lower sintering temperature by adding Li 2 O – GeO 2 sintering additive via the conventional solid-state reaction route. These results suggest that β-spodumene ceramics sintered with Li 2 O – GeO 2 sintering additive has a potential use as LTCC for multichip modules.

Description: Pyrochlore-structured lanthanide stannate ceramic ( Ln 2 Sn 2 O 7 ) has been synthesized via a new complex precipitation method. A suite of characterization techniques, including FTIR, Raman, X-ray, and electron diffraction as well as nitrogen sorption were employed to investigate the structural evolution of the synthesized and calcined powder. Raman, XRD, and selected area electron diffraction results confirm the presence of the pyrochlore structure after calcination of the powder above 1200°C. TEM imaging shows fine crystallites gradually increased in size from approximately 100 nm to about 500 nm with higher calcination temperatures. Grain growth and powder densification upon increasing the calcination temperature was confirmed by nitrogen sorption results. This aqueous synthetic method provides a simple pathway for the preparation of homogeneous lanthanide stannate ceramics.

Description: A computer program (PBUQ) that uses Monte Carlo simulations to propagate uncertainty through regression equations and the equation for the paleosol carbonate CO 2 paleobarometer is presented. PBUQ includes options for all of the common approaches to determining values for input variables and incorporates several recent advancements relevant to determining values for soil-respired CO 2 concentrations, δ 13 C values of respired CO 2 , δ 13 C values of atmospheric CO 2 and temperatures of soil carbonate formation. PBUQ is intended to improve confidence in paleoatmospheric CO 2 research by helping researchers draw statistically significant conclusions. PBUQ can also be used to attribute and partition error among various sources and thereby advance this technique. Sensitivity analysis indicates that S(z) is the largest source of uncertainty for most paleosols and that uncertainty is minimized for soils in which CO 2 is an evenly balanced mixture between soil-derived and atmospheric components. Evenly balanced mixtures are most likely for paleosols formed in deserts and for weakly-developed paleosols. Development of proxies for soil-respired CO 2 concentrations and δ 13 C values of soil-respired CO 2 specifically for such soils is perhaps the most crucial next step for improving this technique. Currently, calcic paleosols are best used to test the significance of trends and/or differences among time slices in paleoatmospheric CO 2 concentration. Application to quantifying Earth System Sensitivity will require large scale averaging of determinations from individual paleosols and/or reduced uncertainty associated with input variables.

Description: Long-lived detachment faults are now known to be important in tectonic evolution of slow-spreading mid-ocean ridges, and there is increasing evidence that fluid flow plays a critical role in development of detachment systems. Here we document a new manifestation of low-temperature hydrothermal venting associated with the detachment fault that formed Kane Megamullion ~3.3-2.1 m.y. ago in the western rift-valley wall of the Mid-Atlantic Ridge. Hydrothermal effects on the detachment surface include 1) cemented mounds of igneous rock and chalk debris containing hydrothermal Mn oxides and Fe oxyhydroxides, and 2) layered deposits of similar Fe-Mn minerals ± interbedded chalks. Mounds are roughly conical, ~1-10 meters high, and contain primarily basalts with lesser gabbro, serpentinite, and polymict breccia. The layered Fe-Mn-rich sediments are flat-bedded to contorted and locally are buckled into low-relief linear or polygonal ridges. We propose that the mounds formed where hydrothermal fluids discharged through the detachment hanging wall near the active fault trace. Hydrothermal precipitates cemented hanging-wall debris and welded it to the footwall, and this debris persisted as mounds as the footwall was exhumed and surrounding unconsolidated material sloughed off the sloping detachment surface. Some of the layered Fe-Mn-rich deposits may have precipitated from fluids discharging from the hanging-wall vents, but they also precipitated from low-temperature fluids venting from the exposed footwall through overlying chalks. Observed natural disturbance and abnormally thin hydrogenous Fe-Mn crusts on some contorted, hydrothermal Fe-Mn-rich chalks on ~2.7 Ma crust suggest diffuse venting that is geologically recent. Results of this study imply that there are significant fluid pathways through all parts of detachment systems and that low-temperature venting through fractured detachment footwalls may continue for several million years off-axis.

Description: Ceramics have played a crucial role in the development of fission based nuclear power, in glass & glass composite high level wasteforms, in composite cements to encapsulate intermediate level wastes (ILW) and also for oxide nuclear fuels based on UO 2 and PuO 2 /UO 2 mixed oxides. They are also used as porous filters with the ability to absorb radionuclides (RN) from air and liquids and are playing a key role in the cleanup at Fukushima. Non-oxides also find current fission applications including in graphite moderators and B 4 C control rods. Ceramics will continue to be significant in the near-term expansion of nuclear power via next-step developments of fuels with inert matrices or based on thoria and in wasteforms using alternative composite cements or single or multiphase ceramics that can host Pu & other difficult RN. Longer term advances for Generation IV reactors, which will operate at higher temperatures & with higher fuel burn-up require innovative fuel developments potentially via carbides & nitrides or composite fuel systems. Novel non-thermal (cement-like) and thermal techniques are currently being developed to treat some of the difficult legacy wastes. Non-thermally derived wasteforms developed from geopolymers, composite cements, hydroceramics, and phosphate-bonded ceramics and thermally derived wasteforms made by Hot Isostatic Pressing and fluidized bed steam reforming (FBSR) as well as vitrification techniques based on cold crucible melting (CCM), Joule-heater in-container melting and plasma melting (PM) are described. Future developments in waste treatment will be based on separation technologies for partitioning individual RN along with design & construction of RN-containing ceramic targets for inducing transmutation reactions. Near demonstration actinide-hosting ceramic wasteforms including multiphase Synroc systems are described. Opportunities also exist for ceramics in structural applications in Generation IV reactors such as composite SiC / SiC and C / C for fuel cladding and control rods and MAX phases and ultrahigh-temperature ceramics (UHTCs) may find near core fuel coating and cladding applications. Uses of ceramics in fusion reactor systems will be both functional (ceramic superconductors in magnet systems for plasma control and in Li silicate breeder blankets in tokamaks) and structural including as sapphire diagnostic windows, graphite diverters, and plasma facing C and UHTCs. In all these cases, performance is limited by poorly understood radiation damage and interface controlled processes, which demands a combined modeling/experimental approach.

Description: Although some existing carbon markets are facing structural issues and economic difficulties in Europe have put a damper on the European Union emissions trading system, new carbon pricing initiatives are developing rapidly, and these initiatives could help slow down greenhouse gas emissions, according to a 29 May report from the World Bank.