ALBERT

Description: : As sequencing becomes cheaper and more widely available, there is a greater need to quickly and effectively analyze large-scale genomic data. While the functionality of AVIA v1.0, whose implementation was based on ANNOVAR, was comparable with other annotation web servers, AVIA v2.0 represents an enhanced web-based server that extends genomic annotations to cell-specific transcripts and protein-level functional annotations. With AVIA’s improved interface, users can better visualize their data, perform comprehensive searches and categorize both coding and non-coding variants. Availability and implementation : AVIA is freely available through the web at http://avia.abcc.ncifcrf.gov . Contact : Hue.Vuong@fnlcr.nih.gov Supplementary information: Supplementary data are available at Bioinformatics online.

Description: : As new methods for multivariate analysis of genome wide association studies become available, it is important to be able to combine results from different cohorts in a meta-analysis. The R package MultiMeta provides an implementation of the inverse-variance-based method for meta-analysis, generalized to an n -dimensional setting. Availability and implementation: The R package MultiMeta can be downloaded from CRAN. Contact: dragana.vuckovic@burlo.trieste.it ; vi1@sanger.ac.uk Supplementary information: Supplementary data are available at Bioinformatics online.

Description: We examine a distributed detection problem in a wireless sensor network, where sensor nodes collaborate to detect a Gaussian signal with an unknown change of power, i.e., a scale parameter. Due to power/bandwidth constraints, we consider the case where each sensor quantizes its observation into a binary digit. The binary data are then transmitted through error-prone wireless links to a fusion center, where a generalized likelihood ratio test (GLRT) detector is employed to perform a global decision. We study the design of a binary quantizer based on an asymptotic analysis of the GLRT. Interestingly, the quantization threshold of the quantizer is independent of the unknown scale parameter. Numerical results are included to illustrate the performance of the proposed quantizer and GLRT in binary symmetric channels (BSCs).

Description: More and more hybrid electric vehicles are driven since they offer such advantages as energy savings and better active safety performance. Hybrid vehicles have two or more power driving systems and frequently switch working condition, so controlling stability is very important. In this work, a two-stage Kalman algorithm method is used to fuse data in hybrid vehicle stability testing. First, the RT3102 navigation system and Dewetron system are introduced. Second, a modeling of data fusion is proposed based on the Kalman filter. Then, this modeling is simulated and tested on a sample vehicle, using Carsim and Simulink software to test the results. The results showed the merits of this modeling.

Description: In this paper, a comprehensive comparison analysis in terms of outage probability and average symbol error ratio (SER) is presented for cooperative cognitive multiple-input and multiple-output (CC-MIMO) multiuser systems with amplify-and-forward (AF) protocol. Specially, we consider two scenarios where the CC-MIMO multiuser systems have the perfect and imperfect channel state information (CSI). The CC-MIMO multiuser systems consist of one multi-antenna source, one single-antenna relay, and multiple multi-antenna destinations. At the secondary source and destinations, the maximal ratio transmission (MRT) and maximal ratio combining (MRC) are employed, respectively. For such CC-MIMO multiuser systems, we first obtain the exact closed-form expressions of outage probability under the two cases where the CC-MIMO multiuser systems have the perfect and imperfect CSI. Then, to reduce the implementation complexity, the tight lower bounds of outage probability and average SER are derived. Finally, to obtain insight, by using the high signal-to-noise ratio (SNR) approximation, the asymptotic estimations of outage probability are achieved. The numerical results show that the derivations are agreed with the simulations, which validate our derivations. At the same time, the results show that, for the systems without perfect CSI, the achievable diversity order reduces to one, regardless of the number of antennas at the cognitive source and destinations as well as the number of the cognitive destinations. Nevertheless, these key parameters affect the coding gain of the CC-MIMO multiuser systems. When the systems have the perfect CSI (or without feedback delay), the achievable diversity gain is determined by the minimum between the number of source’s antennas and the product of the number of destinations and the number of destination’s antennas. For the effect of PU’s parameters, our results indicate that primary systems only affect the coding gain but not the diversity gain.

Description: The goal of cross-domain matching (CDM) is to find correspondences between two sets of objects in different domains in an unsupervised way. CDM has various interesting applications, including photo album summarization where photos are automatically aligned into a designed frame expressed in the Cartesian coordinate system, and temporal alignment which aligns sequences such as videos that are potentially expressed using different features. In this paper, we propose an information-theoretic CDM framework based on squared-loss mutual information (SMI). The proposed approach can directly handle non-linearly related objects/sequences with different dimensions, with the ability that hyper-parameters can be objectively optimized by cross-validation. We apply the proposed method to several real-world problems including image matching, unpaired voice conversion, photo album summarization, cross-feature video and cross-domain video-to-mocap alignment, and Kinect -based action recognition, and experimentally demonstrate that the proposed method is a promising alternative to state-of-the-art CDM methods.

Description: The skeleton of a 2D shape is an important geometric structure in pattern analysis and computer vision. In this paper we study the skeleton of a 2D shape in a two-manifold $mathcal {M}$ , based on a geodesic metric. We present a formal definition of the skeleton $S(Omega )$ for a shape $Omega$ in $mathcal {M}$ and show several properties that make $S(Omega )$ distinct from its Euclidean counterpart in $mathbb {R}^2$ . We further prove that for a shape sequence $lbrace Omega _irbrace$ that converge to a shape $Omega$ in $mathcal {M}$ , the mapping $Omega righta- row overline{S}(Omega )$ is lower semi-continuous. A direct application of this result is that we can use a set $P$ of sample points to approximate the boundary of a 2D shape $Omega$ in $mathcal {M}$ , and the Voronoi diagram of $P$ inside $Omega subset mathcal {M}$ gives a good approximation to the skeleton $S(Omega )$ . Examples of skeleton computation in topography and brain morphometry are illustrated.

Description: A widely used approach for locating points on deformable objects in images is to generate feature response images for each point, and then to fit a shape model to these response images. We demonstrate that Random Forest regression-voting can be used to generate high quality response images quickly. Rather than using a generative or a discriminative model to evaluate each pixel, a regressor is used to cast votes for the optimal position of each point. We show that this leads to fast and accurate shape model matching when applied in the Constrained Local Model framework. We evaluate the technique in detail, and compare it with a range of commonly used alternatives across application areas: the annotation of the joints of the hands in radiographs and the detection of feature points in facial images. We show that our approach outperforms alternative techniques, achieving what we believe to be the most accurate results yet published for hand joint annotation and state-of-the-art performance for facial feature point detection.

Description: We present a novel method to recognise planar structures in a single image and estimate their 3D orientation. This is done by exploiting the relationship between image appearance and 3D structure, using machine learning methods with supervised training data. As such, the method does not require specific features or use geometric cues, such as vanishing points. We employ general feature representations based on spatiograms of gradients and colour, coupled with relevance vector machines for classification and regression. We first show that using hand-labelled training data, we are able to classify pre-segmented regions as being planar or not, and estimate their 3D orientation. We then incorporate the method into a segmentation algorithm to detect multiple planar structures from a previously unseen image.

Description: Multiple view segmentation consists in segmenting objects simultaneously in several views. A key issue in that respect and compared to monocular settings is to ensure propagation of segmentation information between views while minimizing complexity and computational cost. In this work, we first investigate the idea that examining measurements at the projections of a sparse set of 3D points is sufficient to achieve this goal. The proposed algorithm softly assigns each of these 3D samples to the scene background if it projects on the background region in at least one view, or to the foreground if it projects on foreground region in all views. Second, we show how other modalities such as depth may be seamlessly integrated in the model and benefit the segmentation. The paper exposes a detailed set of experiments used to validate the algorithm, showing results comparable with the state of art, with reduced computational complexity. We also discuss the use of different modalities for specific situations, such as dealing with a low number of viewpoints or a scene with color ambiguities between foreground and background.

Description: Currently deep learning has made great breakthroughs in visual and speech processing, mainly because it draws lessons from the hierarchical mode that brain deals with images and speech. In the field of NLP, a topic model is one of the important ways for modeling documents. Topic models are built on a generative model that clearly does not match the way humans write. In this paper, we propose Event Model, which is unsupervised and based on the language processing mechanism of neurolinguistics, to model documents. In Event Model, documents are descriptions of concrete or abstract events seen, heard, or sensed by people and words are objects in the events. Event Model has two stages: word learning and dimensionality reduction. Word learning is to learn semantics of words based on deep learning. Dimensionality reduction is the process that representing a document as a low dimensional vector by a linear mode that is completely different from topic models. Event Model achieves state-of-the-art results on document retrieval tasks.

Description: Text detection in natural scene images is an important prerequisite for many content-based image analysis tasks, while most current research efforts only focus on horizontal or near horizontal scene text. In this paper, first we present a unified distance metric learning framework for adaptive hierarchical clustering, which can simultaneously learn similarity weights (to adaptively combine different feature similarities) and the clustering threshold (to automatically determine the number of clusters). Then, we propose an effective multi-orientation scene text detection system, which constructs text candidates by grouping characters based on this adaptive clustering. Our text candidates construction method consists of several sequential coarse-to-fine grouping steps: morphology-based grouping via single-link clustering, orientation-based grouping via divisive hierarchical clustering, and projection-based grouping also via divisive clustering. The effectiveness of our proposed system is evaluated on several public scene text databases, e.g., ICDAR Robust Reading Competition data sets (2011 and 2013), MSRA-TD500 and NEOCR. Specifically, on the multi-orientation text data set MSRA-TD500, the $f$ measure of our system is $71$ percent, much better than the state-of-the-art performance. We also construct and release a practical challenging multi-orientation scene text data set (USTB-SV1K), which is available at http://prir.ustb.edu.cn/TexStar/MOMV-text-detection/.

Description: Motivation: Stem cell differentiation is largely guided by master transcriptional regulators, but it also depends on the expression of other types of genes, such as cell cycle genes, signaling genes, metabolic genes, trafficking genes, etc. Traditional approaches to understanding gene expression patterns across multiple conditions, such as principal components analysis or K-means clustering, can group cell types based on gene expression, but they do so without knowledge of the differentiation hierarchy. Hierarchical clustering can organize cell types into a tree, but in general this tree is different from the differentiation hierarchy itself. Methods: Given the differentiation hierarchy and gene expression data at each node, we construct a weighted Euclidean distance metric such that the minimum spanning tree with respect to that metric is precisely the given differentiation hierarchy. We provide a set of linear constraints that are provably sufficient for the desired construction and a linear programming approach to identify sparse sets of weights, effectively identifying genes that are most relevant for discriminating different parts of the tree. Results: We apply our method to microarray gene expression data describing 38 cell types in the hematopoiesis hierarchy, constructing a weighted Euclidean metric that uses just 175 genes. However, we find that there are many alternative sets of weights that satisfy the linear constraints. Thus, in the style of random-forest training, we also construct metrics based on random subsets of the genes and compare them to the metric of 175 genes. We then report on the selected genes and their biological functions. Our approach offers a new way to identify genes that may have important roles in stem cell differentiation. Contact: tperkins@ohri.ca Supplementary information: Supplementary data are available at Bioinformatics online.

Description: Motivation: Principal component analysis (PCA) is a basic tool often used in bioinformatics for visualization and dimension reduction. However, it is known that PCA may not consistently estimate the true direction of maximal variability in high-dimensional, low sample size settings, which are typical for molecular data. Assuming that the underlying signal is sparse, i.e. that only a fraction of features contribute to a principal component (PC), this estimation consistency can be retained. Most existing sparse PCA methods use L1-penalization, i.e. the lasso , to perform feature selection. But, the lasso is known to lack variable selection consistency in high dimensions and therefore a subsequent interpretation of selected features can give misleading results. Results: We present S4VDPCA, a sparse PCA method that incorporates a subsampling approach, namely stability selection. S4VDPCA can consistently select the truly relevant variables contributing to a sparse PC while also consistently estimate the direction of maximal variability. The performance of the S4VDPCA is assessed in a simulation study and compared to other PCA approaches, as well as to a hypothetical oracle PCA that ‘knows’ the truly relevant features in advance and thus finds optimal, unbiased sparse PCs. S4VDPCA is computationally efficient and performs best in simulations regarding parameter estimation consistency and feature selection consistency. Furthermore, S4VDPCA is applied to a publicly available gene expression data set of medulloblastoma brain tumors. Features contributing to the first two estimated sparse PCs represent genes significantly over-represented in pathways typically deregulated between molecular subgroups of medulloblastoma. Availability and implementation: Software is available at https://github.com/mwsill/s4vdpca . Contact: m.sill@dkfz.de Supplementary information: Supplementary data are available at Bioinformatics online.

Description: Motivation: Glycans play critical roles in many biological processes, and their structural diversity is key for specific protein-glycan recognition. Comparative structural studies of biological molecules provide useful insight into their biological relationships. However, most computational tools are designed for protein structure, and despite their importance, there is no currently available tool for comparing glycan structures in a sequence order- and size-independent manner. Results: A novel method, GS-align, is developed for glycan structure alignment and similarity measurement. GS-align generates possible alignments between two glycan structures through iterative maximum clique search and fragment superposition. The optimal alignment is then determined by the maximum structural similarity score, GS-score, which is size-independent. Benchmark tests against the Protein Data Bank (PDB) N -linked glycan library and PDB homologous/non-homologous N -glycoprotein sets indicate that GS-align is a robust computational tool to align glycan structures and quantify their structural similarity. GS-align is also applied to template-based glycan structure prediction and monosaccharide substitution matrix generation to illustrate its utility. Availability and implementation: http://www.glycanstructure.org/gsalign . Contact: wonpil@ku.edu Supplementary information: Supplementary data are available at Bioinformatics online.

Description: Motivation: Impedance-based technologies are advancing methods for measuring proliferation of adherent cell cultures non-invasively and in real time. The analysis of the resulting data has so far been hampered by inappropriate computational methods and the lack of systematic data to evaluate the characteristics of the assay. Results: We used a commercially available system for impedance-based growth measurement (xCELLigence) and compared the reported cell index with data from microscopy. We found that the measured signal correlates linearly with the cell number throughout the time of an experiment with sufficient accuracy in subconfluent cell cultures. The resulting growth curves for various colon cancer cells could be well described with the empirical Richards growth model, which allows for extracting quantitative parameters (such as characteristic cycle times). We found that frequently used readouts like the cell index at a specific time or the area under the growth curve cannot be used to faithfully characterize growth inhibition. We propose to calculate the average growth rate of selected time intervals to accurately estimate time-dependent IC50 values of drugs from growth curves. Contact: nils.bluethgen@charite.de Supplementary information: Supplementary data are available at Bioinformatics online.

Description: Community detection in a complex network is an important problem of much interest in recent years. In general, a community detection algorithm chooses an objective function and captures the communities of the network by optimizing the objective function, and then, one uses various heuristics to solve the optimization problem to extract the interesting communities for the user. In this article, we demonstrate the procedure to transform a graph into points of a metric space and develop the methods of community detection with the help of a metric defined for a pair of points. We have also studied and analyzed the community structure of the network therein. The results obtained with our approach are very competitive with most of the well-known algorithms in the literature, and this is justified over the large collection of datasets. On the other hand, it can be observed that time taken by our algorithm is quite less compared to other methods and justifies the theoretical findings.

Description: Motivation: The storage and transmission of high-throughput sequencing data consumes significant resources. As our capacity to produce such data continues to increase, this burden will only grow. One approach to reduce storage and transmission requirements is to compress this sequencing data. Results: We present a novel technique to boost the compression of sequencing that is based on the concept of bucketing similar reads so that they appear nearby in the file. We demonstrate that, by adopting a data-dependent bucketing scheme and employing a number of encoding ideas, we can achieve substantially better compression ratios than existing de novo sequence compression tools, including other bucketing and reordering schemes. Our method, Mince, achieves up to a 45% reduction in file sizes (28% on average) compared with existing state-of-the-art de novo compression schemes. Availability and implementation : Mince is written in C++11, is open source and has been made available under the GPLv3 license. It is available at http://www.cs.cmu.edu/~ckingsf/software/mince . Contact: carlk@cs.cmu.edu Supplementary information: Supplementary data are available at Bioinformatics online.

Description: : Current methods for motif discovery from chromatin immunoprecipitation followed by sequencing (ChIP-seq) data often identify non-targeted transcription factor (TF) motifs, and are even further limited when peak sequences are similar due to common ancestry rather than common binding factors. The latter aspect particularly affects a large number of proteins from the Cys 2 His 2 zinc finger (C2H2-ZF) class of TFs, as their binding sites are often dominated by endogenous retroelements that have highly similar sequences. Here, we present recognition code-assisted discovery of regulatory elements (RCADE) for motif discovery from C2H2-ZF ChIP-seq data. RCADE combines predictions from a DNA recognition code of C2H2-ZFs with ChIP-seq data to identify models that represent the genuine DNA binding preferences of C2H2-ZF proteins. We show that RCADE is able to identify generalizable binding models even from peaks that are exclusively located within the repeat regions of the genome, where state-of-the-art motif finding approaches largely fail. Availability and implementation: RCADE is available as a webserver and also for download at http://rcade.ccbr.utoronto.ca/ . Supplementary information: Supplementary data are available at Bioinformatics online. Contact: t.hughes@utoronto.ca

Description: Motivation: Phylogenetic estimates from published studies can be archived using general platforms like Dryad (Vision, 2010) or TreeBASE (Sanderson et al. , 1994). Such services fulfill a crucial role in ensuring transparency and reproducibility in phylogenetic research. However, digital tree data files often require some editing (e.g. rerooting) to improve the accuracy and reusability of the phylogenetic statements. Furthermore, establishing the mapping between tip labels used in a tree and taxa in a single common taxonomy dramatically improves the ability of other researchers to reuse phylogenetic estimates. As the process of curating a published phylogenetic estimate is not error-free, retaining a full record of the provenance of edits to a tree is crucial for openness, allowing editors to receive credit for their work and making errors introduced during curation easier to correct. Results : Here, we report the development of software infrastructure to support the open curation of phylogenetic data by the community of biologists. The backend of the system provides an interface for the standard database operations of creating, reading, updating and deleting records by making commits to a git repository. The record of the history of edits to a tree is preserved by git’s version control features. Hosting this data store on GitHub ( http://github.com/ ) provides open access to the data store using tools familiar to many developers. We have deployed a server running the ‘phylesystem-api’, which wraps the interactions with git and GitHub. The Open Tree of Life project has also developed and deployed a JavaScript application that uses the phylesystem-api and other web services to enable input and curation of published phylogenetic statements. Availability and implementation : Source code for the web service layer is available at https://github.com/OpenTreeOfLife/phylesystem-api . The data store can be cloned from: https://github.com/OpenTreeOfLife/phylesystem . A web application that uses the phylesystem web services is deployed at http://tree.opentreeoflife.org/curator . Code for that tool is available from https://github.com/OpenTreeOfLife/opentree . Contact : mtholder@gmail.com

Description: Motivation: Chromatin Immunoprecipitation followed by sequencing (ChIP-seq) detects genome-wide DNA–protein interactions and chromatin modifications, returning enriched regions (ERs), usually associated with a significance score. Moderately significant interactions can correspond to true, weak interactions, or to false positives; replicates of a ChIP-seq experiment can provide co-localised evidence to decide between the two cases. We designed a general methodological framework to rigorously combine the evidence of ERs in ChIP-seq replicates, with the option to set a significance threshold on the repeated evidence and a minimum number of samples bearing this evidence. Results : We applied our method to Myc transcription factor ChIP-seq datasets in K562 cells available in the ENCODE project. Using replicates, we could extend up to 3 times the ER number with respect to single-sample analysis with equivalent significance threshold. We validated the ‘rescued’ ERs by checking for the overlap with open chromatin regions and for the enrichment of the motif that Myc binds with strongest affinity; we compared our results with alternative methods (IDR and jMOSAiCS), obtaining more validated peaks than the former and less peaks than latter, but with a better validation. Availability and implementation : An implementation of the proposed method and its source code under GPLv3 license are freely available at http://www.bioinformatics.deib.polimi.it/MSPC/ and http://mspc.codeplex.com/ , respectively. Contact : marco.morelli@iit.it Supplementary information: Supplementary Material are available at Bioinformatics online.

Description: : We announce the release of kSNP3.0, a program for SNP identification and phylogenetic analysis without genome alignment or the requirement for reference genomes. kSNP3.0 is a significantly improved version of kSNP v2. Availability and implementation : kSNP3.0 is implemented as a package of stand-alone executables for Linux and Mac OS X under the open-source BSD license. The executable packages, source code and a full User Guide are freely available at https://sourceforge.net/projects/ksnp/files/ Contact: barryghall@gmail.com

Description: Motivation: We have created an R package named phylogeo that provides a set of geographic utilities for sequencing-based microbial ecology studies. Although the geographic location of samples is an important aspect of environmental microbiology, none of the major software packages used in processing microbiome data include utilities that allow users to map and explore the spatial dimension of their data. phylogeo solves this problem by providing a set of plotting and mapping functions that can be used to visualize the geographic distribution of samples, to look at the relatedness of microbiomes using ecological distance, and to map the geographic distribution of particular sequences. By extending the popular phyloseq package and using the same data structures and command formats, phylogeo allows users to easily map and explore the geographic dimensions of their data from the R programming language. Availability and Implementation: phylogeo is documented and freely available http://zachcp.github.io/phylogeo Contact : zcharlop@rockefeller.edu

Description: : Gener is a development module for programming chemical controllers based on DNA strand displacement. Gener is developed with the aim of providing a simple interface that minimizes the opportunities for programming errors: Gener allows the user to test the computations of the DNA programs based on a simple two-domain strand displacement algebra, the minimal available so far. The tool allows the user to perform stepwise computations with respect to the rules of the algebra as well as exhaustive search of the computation space with different options for exploration and visualization. Gener can be used in combination with existing tools, and in particular, its programs can be exported to Microsoft Research’s DSD tool as well as to LaTeX. Availability and implementation : Gener is available for download at the Cosbi website at http://www.cosbi.eu/research/prototypes/gener as a windows executable that can be run on Mac OS X and Linux by using Mono. Contact : ozan@cosbi.eu

Description: Motivation: Molecular dynamics simulations provide atomic insight into the physicochemical characteristics of lipid membranes and hence, a wide range of force field families capable of modelling various lipid types have been developed in recent years. To model membranes in a biologically realistic lipid composition, simulation systems containing multiple different lipids must be assembled. Results: We present a new web service called MemGen that is capable of setting up simulation systems of heterogenous lipid membranes. MemGen is not restricted to certain lipid force fields or lipid types, but instead builds membranes from uploaded structure files which may contain any kind of amphiphilic molecule. MemGen works with any all-atom or united-atom lipid representation. Availability and implementation: MemGen is freely available without registration at http://memgen.uni-goettingen.de . Contact: jhub@gwdg.de Supplementary information: Supplementary data are available at Bioinformatics online.

Description: A three-step iterative method with fifth-order convergence as a new modification of Newton’s method was presented. This method is for finding multiple roots of nonlinear equation with unknown multiplicity m whose multiplicity m is the highest multiplicity. Its order of convergence is analyzed and proved. Results for some numerical examples show the efficiency of the new method.

Description: To reduce the energy cost of underwater acoustic sensor networks (UWSNs), the duty cycle (i.e., periodic wake-up and sleep) concept has been used in several medium access control (MAC) protocols. Although these protocols are energy efficient, they sacrifice bandwidth utilization, which leads to lower transmission rate. In order to solve this problem, asynchronous duty cycle with network-coding Asynchronous Duty Cycle with Network-Coding MAC (ADCNC-MAC) is proposed. It contains initialization of the MAC protocol phase and data transmission phase. In the first phase, we use an asynchronous duty cycle to find a rendezvous time for exchanging data. A strategy to select network coder nodes is presented to confirm the number of network coder nodes and distribution in the network coder layer. In the data transmission phase, the network coder nodes transmit using the proposed network-coding-based algorithm and a higher volume of packet will be transmitted to the Sink with the same number of transmissions. Simulation results show that ADCNC-MAC achieves higher power efficiency, improves packet delivery ratio (PDR), and network throughput.

Description: Motivation: In practice, identifying and interpreting the functional impacts of the regulatory relationships between micro-RNA and messenger-RNA is non-trivial. The sheer scale of possible micro-RNA and messenger-RNA interactions can make the interpretation of results difficult. Results: We propose a supervised framework, pMim, built upon concepts of significance combination, for jointly ranking regulatory micro-RNA and their potential functional impacts with respect to a condition of interest. Here, pMim directly tests if a micro-RNA is differentially expressed and if its predicted targets, which lie in a common biological pathway, have changed in the opposite direction. We leverage the information within existing micro-RNA target and pathway databases to stabilize the estimation and annotation of micro-RNA regulation making our approach suitable for datasets with small sample sizes. In addition to outputting meaningful and interpretable results, we demonstrate in a variety of datasets that the micro-RNA identified by pMim, in comparison to simpler existing approaches, are also more concordant with what is described in the literature. Availability and implementation: This framework is implemented as an R function, pMim , in the package sydSeq available from http://www.ellispatrick.com/r-packages . Contact: jean.yang@sydney.edu.au Supplementary information: Supplementary data are available at Bioinformatics online.

Description: Motivation: Cellular mRNA levels originate from the combined action of multiple regulatory processes, which can be recapitulated by the rates of pre-mRNA synthesis, pre-mRNA processing and mRNA degradation. Recent experimental and computational advances set the basis to study these intertwined levels of regulation. Nevertheless, software for the comprehensive quantification of RNA dynamics is still lacking. Results: INSPEcT is an R package for the integrative analysis of RNA- and 4sU-seq data to study the dynamics of transcriptional regulation. INSPEcT provides gene-level quantification of these rates, and a modeling framework to identify which of these regulatory processes are most likely to explain the observed mRNA and pre-mRNA concentrations. Software performance is tested on a synthetic dataset, instrumental to guide the choice of the modeling parameters and the experimental design. Availability and implementation: INSPEcT is submitted to Bioconductor and is currently available as Supplementary Additional File S1 . Contact: mattia.pelizzola@iit.it Supplementary Information: Supplementary data are available at Bioinformatics online.

Description: Motivation: Experimentally determined gene regulatory networks can be enriched by computational inference from high-throughput expression profiles. However, the prediction of regulatory interactions is severely impaired by indirect and spurious effects, particularly for eukaryotes. Recently, published methods report improved predictions by exploiting the a priori known targets of a regulator (its local topology) in addition to expression profiles. Results: We find that methods exploiting known targets show an unexpectedly high rate of false discoveries. This leads to inflated performance estimates and the prediction of an excessive number of new interactions for regulators with many known targets. These issues are hidden from common evaluation and cross-validation setups, which is due to Simpson’s paradox. We suggest a confidence score recalibration method (CoRe) that reduces the false discovery rate and enables a reliable performance estimation. Conclusions: CoRe considerably improves the results of network inference methods that exploit known targets. Predictions then display the biological process specificity of regulators more correctly and enable the inference of accurate genome-wide regulatory networks in eukaryotes. For yeast, we propose a network with more than 22 000 confident interactions. We point out that machine learning approaches outside of the area of network inference may be affected as well. Availability and implementation: Results, executable code and networks are available via our website http://www.bio.ifi.lmu.de/forschung/CoRe . Contact: robert.kueffner@helmholtz-muenchen.de Supplementary information: Supplementary data are available at Bioinformatics online.

Description: Motivation: Stoichiometric and constraint-based methods of computational strain design have become an important tool for rational metabolic engineering. One of those relies on the concept of constrained minimal cut sets (cMCSs). However, as most other techniques, cMCSs may consider only reaction (or gene) knockouts to achieve a desired phenotype. Results : We generalize the cMCSs approach to constrained regulatory MCSs (cRegMCSs), where up/downregulation of reaction rates can be combined along with reaction deletions. We show that flux up/downregulations can virtually be treated as cuts allowing their direct integration into the algorithmic framework of cMCSs. Because of vastly enlarged search spaces in genome-scale networks, we developed strategies to (optionally) preselect suitable candidates for flux regulation and novel algorithmic techniques to further enhance efficiency and speed of cMCSs calculation. We illustrate the cRegMCSs approach by a simple example network and apply it then by identifying strain designs for ethanol production in a genome-scale metabolic model of Escherichia coli. The results clearly show that cRegMCSs combining reaction deletions and flux regulations provide a much larger number of suitable strain designs, many of which are significantly smaller relative to cMCSs involving only knockouts. Furthermore, with cRegMCSs, one may also enable the fine tuning of desired behaviours in a narrower range. The new cRegMCSs approach may thus accelerate the implementation of model-based strain designs for the bio-based production of fuels and chemicals. Availability and implementation: MATLAB code and the examples can be downloaded at http://www.mpi-magdeburg.mpg.de/projects/cna/etcdownloads.html . Contact : krishna.mahadevan@utoronto.ca or klamt@mpi-magdeburg.mpg.de Supplementary information: Supplementary data are available at Bioinformatics online.

Description: Motivation: Lipids are a large and diverse group of biological molecules with roles in membrane formation, energy storage and signaling. Cellular lipidomes may contain tens of thousands of structures, a staggering degree of complexity whose significance is not yet fully understood. High-throughput mass spectrometry-based platforms provide a means to study this complexity, but the interpretation of lipidomic data and its integration with prior knowledge of lipid biology suffers from a lack of appropriate tools to manage the data and extract knowledge from it. Results: To facilitate the description and exploration of lipidomic data and its integration with prior biological knowledge, we have developed a knowledge resource for lipids and their biology—SwissLipids. SwissLipids provides curated knowledge of lipid structures and metabolism which is used to generate an in silico library of feasible lipid structures. These are arranged in a hierarchical classification that links mass spectrometry analytical outputs to all possible lipid structures, metabolic reactions and enzymes. SwissLipids provides a reference namespace for lipidomic data publication, data exploration and hypothesis generation. The current version of SwissLipids includes over 244 000 known and theoretically possible lipid structures, over 800 proteins, and curated links to published knowledge from over 620 peer-reviewed publications. We are continually updating the SwissLipids hierarchy with new lipid categories and new expert curated knowledge. Availability: SwissLipids is freely available at http://www.swisslipids.org/ . Contact: alan.bridge@isb-sib.ch Supplementary information: Supplementary data are available at Bioinformatics online.

Description: Motivation: Both the quantitative real-time polymerase chain reaction (qPCR) and quantitative isothermal amplification (qIA) are standard methods for nucleic acid quantification. Numerous real-time read-out technologies have been developed. Despite the continuous interest in amplification-based techniques, there are only few tools for pre-processing of amplification data. However, a transparent tool for precise control of raw data is indispensable in several scenarios, for example, during the development of new instruments. Results: chipPCR is an R package for the pre-processing and quality analysis of raw data of amplification curves. The package takes advantage of R ’s S 4 object model and offers an extensible environment. chipPCR contains tools for raw data exploration: normalization, baselining, imputation of missing values, a powerful wrapper for amplification curve smoothing and a function to detect the start and end of an amplification curve. The capabilities of the software are enhanced by the implementation of algorithms unavailable in R , such as a 5-point stencil for derivative interpolation. Simulation tools, statistical tests, plots for data quality management, amplification efficiency/quantification cycle calculation, and datasets from qPCR and qIA experiments are part of the package. Core functionalities are integrated in GUIs (web-based and standalone shiny applications), thus streamlining analysis and report generation. Availability and implementation: http://cran.r-project.org/web/packages/chipPCR . Source code: https://github.com/michbur/chipPCR . Contact : stefan.roediger@b-tu.de Supplementary information: Supplementary data are available at Bioinformatics online.

Description: : A key to understanding RNA function is to uncover its complex 3D structure. Experimental methods used for determining RNA 3D structures are technologically challenging and laborious, which makes the development of computational prediction methods of substantial interest. Previously, we developed the iFoldRNA server that allows accurate prediction of short (〈50 nt) tertiary RNA structures starting from primary sequences. Here, we present a new version of the iFoldRNA server that permits the prediction of tertiary structure of RNAs as long as a few hundred nucleotides. This substantial increase in the server capacity is achieved by utilization of experimental information such as base-pairing and hydroxyl-radical probing. We demonstrate a significant benefit provided by integration of experimental data and computational methods. Availability and implementation: http://ifoldrna.dokhlab.org Contact: dokh@unc.eu

Description: : The ms-data-core-api is a free, open-source library for developing computational proteomics tools and pipelines. The Application Programming Interface, written in Java, enables rapid tool creation by providing a robust, pluggable programming interface and common data model. The data model is based on controlled vocabularies/ontologies and captures the whole range of data types included in common proteomics experimental workflows, going from spectra to peptide/protein identifications to quantitative results. The library contains readers for three of the most used Proteomics Standards Initiative standard file formats: mzML, mzIdentML, and mzTab. In addition to mzML, it also supports other common mass spectra data formats: dta, ms2, mgf, pkl, apl (text-based), mzXML and mzData (XML-based). Also, it can be used to read PRIDE XML, the original format used by the PRIDE database, one of the world-leading proteomics resources. Finally, we present a set of algorithms and tools whose implementation illustrates the simplicity of developing applications using the library. Availability and implementation: The software is freely available at https://github.com/PRIDE-Utilities/ms-data-core-api . Supplementary information: Supplementary data are available at Bioinformatics online Contact: juan@ebi.ac.uk

Description: : Scanning probe microscopy (SPM) is already a relevant tool in biological research at the nanoscale. We present ‘Flatten plus’, a recent and helpful implementation in the well-known WSxM free software package. ‘Flatten plus’ allows reducing low-frequency noise in SPM images in a semi-automated way preventing the appearance of typical artifacts associated with such filters. Availability and implementation: WSxM is a free software implemented in C++ supported on MS Windows, but it can also be run under Mac or Linux using emulators such as Wine or Parallels. WSxM can be downloaded from http://www.wsxmsolutions.com/ . Contact: ignacio.horcas@wsxmsolutions.com

Description: : Despite the plethora of methods available for the functional analysis of omics data, obtaining comprehensive-yet detailed understanding of the results remains challenging. This is mainly due to the lack of publicly available tools for the visualization of this type of information. Here we present an R package called GOplot, based on ggplot2, for enhanced graphical representation. Our package takes the output of any general enrichment analysis and generates plots at different levels of detail: from a general overview to identify the most enriched categories (bar plot, bubble plot) to a more detailed view displaying different types of information for molecules in a given set of categories (circle plot, chord plot, cluster plot). The package provides a deeper insight into omics data and allows scientists to generate insightful plots with only a few lines of code to easily communicate the findings. Availability and Implementation: The R package GOplot is available via CRAN-The Comprehensive R Archive Network: http://cran.r-project.org/web/packages/GOplot . The shiny web application of the Venn diagram can be found at: https://wwalter.shinyapps.io/Venn/ . A detailed manual of the package with sample figures can be found at https://wencke.github.io/ Contact: fscabo@cnic.es or mricote@cnic.es

Description: Motivation: Horizontal transfer of transposable (HTT) elements among eukaryotes was discovered in the mid-1980s. As then, 〉300 new cases have been described. New findings about HTT are revealing the evolutionary impact of this phenomenon on host genomes. In order to provide an up to date, interactive and expandable database for such events, we developed the HTT-DB database. Results: HTT-DB allows easy access to most of HTT cases reported along with rich information about each case. Moreover, it allows the user to generate tables and graphs based on searches using Transposable elements and/or host species classification and export them in several formats. Availability and implementation: This database is freely available on the web at http://lpa.saogabriel.unipampa.edu.br:8080/httdatabase . HTT-DB was developed based on Java and MySQL with all major browsers supported. Tools and software packages used are free for personal or non-profit projects. Contact: bdotto82@gmail.com or gabriel.wallau@gmail.com

Description: A novel approach for event summarization and rare event detection is proposed. Unlike conventional methods that deal with event summarization and rare event detection independently, our method solves them in a single framework by transforming them into a graph editing problem. In our approach, a video is represented by a graph, each node of which indicates an event obtained by segmenting the video spatially and temporally. The edges between nodes describe the relationship between events. Based on the degree of relations, edges have different weights. After learning the graph structure, our method finds subgraphs that represent event summarization and rare events in the video by editing the graph, that is, merging its subgraphs or pruning its edges. The graph is edited to minimize a predefined energy model with the Markov Chain Monte Carlo (MCMC) method. The energy model consists of several parameters that represent the causality, frequency, and significance of events. We design a specific energy model that uses these parameters to satisfy each objective of event summarization and rare event detection. The proposed method is extended to obtain event summarization and rare event detection results across multiple videos captured from multiple views. For this purpose, the proposed method independently learns and edits each graph of individual videos for event summarization or rare event detection. Then, the method matches the extracted multiple graphs to each other, and constructs a single composite graph that represents event summarization or rare events from multiple views. Experimental results show that the proposed approach accurately summarizes multiple videos in a fully unsupervised manner . Moreover, the experiments demonstrate that the approach is advantageous in detecting rare transition of events .

Description: Object tracking has been one of the most important and active research areas in the field of computer vision. A large number of tracking algorithms have been proposed in recent years with demonstrated success. However, the set of sequences used for evaluation is often not sufficient or is sometimes biased for certain types of algorithms. Many datasets do not have common ground-truth object positions or extents, and this makes comparisons among the reported quantitative results difficult. In addition, the initial conditions or parameters of the evaluated tracking algorithms are not the same, and thus, the quantitative results reported in literature are incomparable or sometimes contradictory. To address these issues, we carry out an extensive evaluation of the state-of-the-art online object-tracking algorithms with various evaluation criteria to understand how these methods perform within the same framework. In this work, we first construct a large dataset with ground-truth object positions and extents for tracking and introduce the sequence attributes for the performance analysis. Second, we integrate most of the publicly available trackers into one code library with uniform input and output formats to facilitate large-scale performance evaluation. Third, we extensively evaluate the performance of 31 algorithms on 100 sequences with different initialization settings. By analyzing the quantitative results, we identify effective approaches for robust tracking and provide potential future research directions in this field.

Description: Fused Lasso is a popular regression technique that encodes the smoothness of the data. It has been applied successfully to many applications with a smooth feature structure. However, the computational cost of the existing solvers for fused Lasso is prohibitive when the feature dimension is extremely large. In this paper, we propose novel screening rules that are able to quickly identity the adjacent features with the same coefficients. As a result, the number of variables to be estimated can be significantly reduced, leading to substantial savings in computational cost and memory usage. To the best of our knowledge, the proposed approach is the first attempt to develop screening methods for the fused Lasso problem with general data matrix. Our major contributions are: 1) we derive a new dual formulation of fused Lasso that comes with several desirable properties; 2) we show that the new dual formulation of fused Lasso is equivalent to that of the standard Lasso by two affine transformations; 3) we propose a novel framework for developing effective and efficient screening rules for f used La sso via the m onotonicity of the s ubdifferentials (FLAMS). Some appealing features of FLAMS are: 1) our methods are safe in the sense that the detected adjacent features are guaranteed to have the same coefficients; 2) the dataset needs to be scanned only once to run the screening, whose computational cost is negligible compared to that of solving the fused Lasso; (3) FLAMS is independent of the solvers and can be integrated with any existing solvers. We have evaluated the proposed FLAMS rules on both synthetic and real datasets. The experiments indicate that FLAMS is very effective in identifying the adjacent features with the same coefficients. The speedup gained by FLAMS can be orders of magnitude.

Description: Hidden conditional random fields (HCRFs) are discriminative latent variable models which have been shown to successfully learn the hidden structure of a given classification problem. An Infinite hidden conditional random field is a hidden conditional random field with a countably infinite number of hidden states, which rids us not only of the necessity to specify a priori a fixed number of hidden states available but also of the problem of overfitting. Markov chain Monte Carlo (MCMC) sampling algorithms are often employed for inference in such models. However, convergence of such algorithms is rather difficult to verify, and as the complexity of the task at hand increases the computational cost of such algorithms often becomes prohibitive. These limitations can be overcome by variational techniques. In this paper, we present a generalized framework for infinite HCRF models, and a novel variational inference approach on a model based on coupled Dirichlet Process Mixtures, the HCRF-DPM. We show that the variational HCRF-DPM is able to converge to a correct number of represented hidden states, and performs as well as the best parametric HCRFs—chosen via cross-validation—for the difficult tasks of recognizing instances of agreement, disagreement, and pain in audiovisual sequences.

Description: In this paper, we address the challenging problem of detecting pedestrians who appear in groups. A new approach is proposed for single-pedestrian detection aided by two-pedestrian detection. A mixture model of two-pedestrian detectors is designed to capture the unique visual cues which are formed by nearby pedestrians but cannot be captured by single-pedestrian detectors. A probabilistic framework is proposed to model the relationship between the configurations estimated by single- and two-pedestrian detectors, and to refine the single-pedestrian detection result using two-pedestrian detection. The two-pedestrian detector can integrate with any single-pedestrian detector. Twenty-five state-of-the-art single-pedestrian detection approaches are combined with the two-pedestrian detector on three widely used public datasets: Caltech, TUD-Brussels, and ETH. Experimental results show that our framework improves all these approaches. The average improvement is $9$ percent on the Caltech-Test dataset, $11$ percent on the TUD-Brussels dataset and $17$ percent on the ETH dataset in terms of average miss rate. The lowest average miss rate is reduced from $37$ to percent on the Caltech-Test dataset, from $55$ to $50$ percent on the TUD-Brussels dataset and from $43$ to $38$ percent on the ETH dataset.

Description: The possibility of having information access anytime and anywhere has caused a huge increase of the popularity of wireless networks. Requirements of users and owners have been ever-increasing. However, concerns about the potential health impact of exposure to radio frequency (RF) sources have arisen and are getting accounted for in wireless network planning. In addition to adequate coverage and reduced human exposure, the installation cost of the wireless network is also an important criterion in the planning process. In this paper, a hybrid algorithm is used to optimize indoor wireless network planning while satisfying three demands: maximum coverage, minimal full installation cost (cabling, cable gutters, drilling holes, labor, etc.), and minimal human exposure. For the first time, wireless indoor networks are being optimized based on these advanced and realistic conditions. The algorithm is investigated for three scenarios and for different configurations. The impact of different exposure requirements and cost scenarios is assessed.

Description: Physical transceiver implementations for wireless communication systems usually suffer from transmit-radio frequency (Tx-RF) and receiver-RF (Rx-RF) impairments. In this paper, we aim to design efficient coordinated beamforming for multicell multiuser multi-antenna systems by fully taking into account the residual transceiver impairments. Our design objectives include both spectral efficiency and energy efficiency. In particular, we first derive the closed-form expression of the mean square error (MSE) which includes the impact of transceiver impairments. Based on that, we propose an alternating optimization algorithm to solve the coordinated multicell beamforming problems with the goal of minimizing the worst user MSE, and the sum MSE. Then, by exploiting the relationship between the minimum mean square error (MMSE) and the achievable rate, we develop a new algorithm to address the sum rate maximization problem. This approach is further generalized to solve the more intractable energy efficiency optimization problem. We prove that all the proposed iterative algorithms guarantee to converge to a stationary point. Numerical results show that our proposed schemes achieve a better performance than conventional coordinated beamforming algorithms that were designed ignoring the transceiver impairments.

Description: Motivation : The majority of variation identified by genome wide association studies falls in non-coding genomic regions and is hypothesized to impact regulatory elements that modulate gene expression. Here we present a statistically rigorous software tool GREGOR (Genomic Regulatory Elements and Gwas Overlap algoRithm) for evaluating enrichment of any set of genetic variants with any set of regulatory features. Using variants from five phenotypes, we describe a data-driven approach to determine the tissue and cell types most relevant to a trait of interest and to identify the subset of regulatory features likely impacted by these variants. Last, we experimentally evaluate six predicted functional variants at six lipid-associated loci and demonstrate significant evidence for allele-specific impact on expression levels. GREGOR systematically evaluates enrichment of genetic variation with the vast collection of regulatory data available to explore novel biological mechanisms of disease and guide us toward the functional variant at trait-associated loci. Availability and implementation : GREGOR, including source code, documentation, examples, and executables, is available at http://genome.sph.umich.edu/wiki/GREGOR . Contact : cristen@umich.edu Supplementary information : Supplementary data are available at Bioinformatics online.

Description: Motivation: Genome and transcriptome analyses can be used to explore cancers comprehensively, and it is increasingly common to have multiple omics data measured from each individual. Furthermore, there are rich functional data such as predicted impact of mutations on protein coding and gene/protein networks. However, integration of the complex information across the different omics and functional data is still challenging. Clinical validation, particularly based on patient outcomes such as survival, is important for assessing the relevance of the integrated information and for comparing different procedures. Results: An analysis pipeline is built for integrating genomic and transcriptomic alterations from whole-exome and RNA sequence data and functional data from protein function prediction and gene interaction networks. The method accumulates evidence for the functional implications of mutated potential driver genes found within and across patients. A driver-gene score (DGscore) is developed to capture the cumulative effect of such genes. To contribute to the score, a gene has to be frequently mutated, with high or moderate mutational impact at protein level, exhibiting an extreme expression and functionally linked to many differentially expressed neighbors in the functional gene network. The pipeline is applied to 60 matched tumor and normal samples of the same patient from The Cancer Genome Atlas breast-cancer project. In clinical validation, patients with high DGscores have worse survival than those with low scores ( P = 0.001). Furthermore, the DGscore outperforms the established expression-based signatures MammaPrint and PAM50 in predicting patient survival. In conclusion, integration of mutation, expression and functional data allows identification of clinically relevant potential driver genes in cancer. Availability and implementation: The documented pipeline including annotated sample scripts can be found in http://fafner.meb.ki.se/biostatwiki/driver-genes/ . Contact: yudi.pawitan@ki.se Supplementary information: Supplementary data are available at Bioinformatics online.

Description: Motivation: With improvements in next-generation sequencing technologies and reductions in price, ordered RNA-seq experiments are becoming common. Of primary interest in these experiments is identifying genes that are changing over time or space, for example, and then characterizing the specific expression changes. A number of robust statistical methods are available to identify genes showing differential expression among multiple conditions, but most assume conditions are exchangeable and thereby sacrifice power and precision when applied to ordered data. Results: We propose an empirical Bayes mixture modeling approach called EBSeq-HMM. In EBSeq-HMM, an auto-regressive hidden Markov model is implemented to accommodate dependence in gene expression across ordered conditions. As demonstrated in simulation and case studies, the output proves useful in identifying differentially expressed genes and in specifying gene-specific expression paths. EBSeq-HMM may also be used for inference regarding isoform expression. Availability and implementation: An R package containing examples and sample datasets is available at Bioconductor. Contact: kendzior@biostat.wisc.edu Supplementary information: Supplementary data are available at Bioinformatics online.

Description: Motivation: Sequence discovery tools play a central role in several fields of computational biology. In the framework of Transcription Factor binding studies, most of the existing motif finding algorithms are computationally demanding, and they may not be able to support the increasingly large datasets produced by modern high-throughput sequencing technologies. Results: We present FastMotif, a new motif discovery algorithm that is built on a recent machine learning technique referred to as Method of Moments. Based on spectral decompositions, our method is robust to model misspecifications and is not prone to locally optimal solutions. We obtain an algorithm that is extremely fast and designed for the analysis of big sequencing data. On HT-Selex data, FastMotif extracts motif profiles that match those computed by various state-of-the-art algorithms, but one order of magnitude faster. We provide a theoretical and numerical analysis of the algorithm’s robustness and discuss its sensitivity with respect to the free parameters. Availability and implementation: The Matlab code of FastMotif is available from http://lcsb-portal.uni.lu/bioinformatics . Contact: vlassis@adobe.com Supplementary information: Supplementary data are available at Bioinformatics online.

Description: Motivation: Next-generation high-throughput sequencing has become a state-of-the-art technique in genome assembly. Scaffolding is one of the main stages of the assembly pipeline. During this stage, contigs assembled from the paired-end reads are merged into bigger chains called scaffolds. Because of a high level of statistical noise, chimeric reads, and genome repeats the problem of scaffolding is a challenging task. Current scaffolding software packages widely vary in their quality and are highly dependent on the read data quality and genome complexity. There are no clear winners and multiple opportunities for further improvements of the tools still exist. Results: This article presents an efficient scaffolding algorithm ScaffMatch that is able to handle reads with both short (〈600 bp) and long (〉35 000 bp) insert sizes producing high-quality scaffolds. We evaluate our scaffolding tool with the F score and other metrics (N50, corrected N50) on eight datasets comparing it with the most available packages. Our experiments show that ScaffMatch is the tool of preference for the most datasets. Availability and implementation: The source code is available at http://alan.cs.gsu.edu/NGS/?q=content/scaffmatch . Contact: mandric@cs.gsu.edu Supplementary information: Supplementary data are available at Bioinformatics online.

Description: Motivation: Identifying protein subchloroplast localization in chloroplast organelle is very helpful for understanding the function of chloroplast proteins. There have existed a few computational prediction methods for protein subchloroplast localization. However, these existing works have ignored proteins with multiple subchloroplast locations when constructing prediction models, so that they can predict only one of all subchloroplast locations of this kind of multilabel proteins. Results: To address this problem, through utilizing label-specific features and label correlations simultaneously, a novel multilabel classifier was developed for predicting protein subchloroplast location(s) with both single and multiple location sites. As an initial study, the overall accuracy of our proposed algorithm reaches 55.52%, which is quite high to be able to become a promising tool for further studies. Availability and implementation: An online web server for our proposed algorithm named MultiP-SChlo was developed, which are freely accessible at http://biomed.zzuli.edu.cn/bioinfo/multip-schlo/ . Contact: pandaxiaoxi@gmail.com or gzli@tongji.edu.cn Supplementary information: Supplementary data are available at Bioinformatics online.

Description: Motivation: Loops in proteins are often involved in biochemical functions. Their irregularity and flexibility make experimental structure determination and computational modeling challenging. Most current loop modeling methods focus on modeling single loops. In protein structure prediction, multiple loops often need to be modeled simultaneously. As interactions among loops in spatial proximity can be rather complex, sampling the conformations of multiple interacting loops is a challenging task. Results: In this study, we report a new method called m ulti-loop Di stance-guided S equential chain- Gro wth Monte Carlo ( M -D i SG ro ) for prediction of the conformations of multiple interacting loops in proteins. Our method achieves an average RMSD of 1.93 Å for lowest energy conformations of 36 pairs of interacting protein loops with the total length ranging from 12 to 24 residues. We further constructed a data set containing proteins with 2, 3 and 4 interacting loops. For the most challenging target proteins with four loops, the average RMSD of the lowest energy conformations is 2.35 Å. Our method is also tested for predicting multiple loops in β-barrel membrane proteins. For outer-membrane protein G, the lowest energy conformation has a RMSD of 2.62 Å for the three extracellular interacting loops with a total length of 34 residues (12, 12 and 10 residues in each loop). Availability and implementation : The software is freely available at: tanto.bioe.uic.edu/m-DiSGro. Contact: jinfeng@stat.fsu.edu or jliang@uic.edu Supplementary information : Supplementary data are available at Bioinformatics online.

Description: Motivation: Network comparison is a computationally intractable problem with important applications in systems biology and other domains. A key challenge is to properly quantify similarity between wiring patterns of two networks in an alignment-free fashion. Also, alignment-based methods exist that aim to identify an actual node mapping between networks and as such serve a different purpose. Various alignment-free methods that use different global network properties (e.g. degree distribution) have been proposed. Methods based on small local subgraphs called graphlets perform the best in the alignment-free network comparison task, due to high level of topological detail that graphlets can capture. Among different graphlet-based methods, Graphlet Correlation Distance (GCD) was shown to be the most accurate for comparing networks. Recently, a new graphlet-based method called NetDis was proposed, which was claimed to be superior. We argue against this, as the performance of NetDis was not properly evaluated to position it correctly among the other alignment-free methods. Results : We evaluate the performance of available alignment-free network comparison methods, including GCD and NetDis. We do this by measuring accuracy of each method (in a systematic precision-recall framework) in terms of how well the method can group (cluster) topologically similar networks. By testing this on both synthetic and real-world networks from different domains, we show that GCD remains the most accurate, noise-tolerant and computationally efficient alignment-free method. That is, we show that NetDis does not outperform the other methods, as originally claimed, while it is also computationally more expensive. Furthermore, since NetDis is dependent on the choice of a network null model (unlike the other graphlet-based methods), we show that its performance is highly sensitive to the choice of this parameter. Finally, we find that its performance is not independent on network sizes and densities, as originally claimed. Contact : natasha@imperial.ac.uk Supplementary information: Supplementary data are available at Bioinformatics online.

Description: Motivation: The functional impact of small molecules is increasingly being assessed in different eukaryotic species through large-scale phenotypic screening initiatives. Identifying the targets of these molecules is crucial to mechanistically understand their function and uncover new therapeutically relevant modes of action. However, despite extensive work carried out in model organisms and human, it is still unclear to what extent one can use information obtained in one species to make predictions in other species. Results: Here, for the first time, we explore and validate at a large scale the use of protein homology relationships to predict the targets of small molecules across different species. Our results show that exploiting target homology can significantly improve the predictions, especially for molecules experimentally tested in other species. Interestingly, when considering separately orthology and paralogy relationships, we observe that mapping small molecule interactions among orthologs improves prediction accuracy, while including paralogs does not improve and even sometimes worsens the prediction accuracy. Overall, our results provide a novel approach to integrate chemical screening results across multiple species and highlight the promises and remaining challenges of using protein homology for small molecule target identification. Availability and implementation: Homology-based predictions can be tested on our website http://www.swisstargetprediction.ch . Contact: david.gfeller@unil.ch or vincent.zoete@isb-sib.ch . Supplementary information: Supplementary data are available at Bioinformatics online.

Description: Systems based on bag-of-words models from image features collected at maxima of sparse interest point operators have been used successfully for both computer visual object and action recognition tasks. While the sparse, interest-point based approach to recognition is not inconsistent with visual processing in biological systems that operate in ‘saccade and fixate’ regimes, the methodology and emphasis in the human and the computer vision communities remains sharply distinct. Here, we make three contributions aiming to bridge this gap. First, we complement existing state-of-the art large scale dynamic computer vision annotated datasets like Hollywood-2  [1] and UCF Sports  [2] with human eye movements collected under the ecological constraints of visual action and scene context recognition tasks. To our knowledge these are the first large human eye tracking datasets to be collected and made publicly available for video, vision.imar.ro/eyetracking (497,107 frames, each viewed by 19 subjects), unique in terms of their (a) large scale and computer vision relevance, (b) dynamic, video stimuli, (c) task control, as well as free-viewing . Second, we introduce novel dynamic consistency and alignment measures , which underline the remarkable stability of patterns of visual search among subjects. Third, we leverage the significant amount of collected data in order to pursue studies and build automatic, end-to-end trainable computer vision systems based on human eye movements. Our studies not only shed light on the differences between computer vision spatio-temporal interest point image sampling strategies and the human fixations, as well as their impact for visual recognition performance, but also demonstrate that human fixations can be accurately predicted, and when used in an end-to-end automatic system, leveraging some of the advanced computer vision practice, can lead to state of the art results.

Description: We consider the problem of parameter estimation and energy minimization for a region-based semantic segmentation model. The model divides the pixels of an image into non-overlapping connected regions, each of which is to a semantic class. In the context of energy minimization, the main problem we face is the large number of putative pixel-to-region assignments. We address this problem by designing an accurate linear programming based approach for selecting the best set of regions from a large dictionary. The dictionary is constructed by merging and intersecting segments obtained from multiple bottom-up over-segmentations. The linear program is solved efficiently using dual decomposition. In the context of parameter estimation, the main problem we face is the lack of fully supervised data. We address this issue by developing a principled framework for parameter estimation using diverse data. More precisely, we propose a latent structural support vector machine formulation, where the latent variables model any missing information in the human annotation. Of particular interest to us are three types of annotations: (i) images segmented using generic foreground or background classes; (ii) images with bounding boxes specified for objects; and (iii) images labeled to indicate the presence of a class. Using large, publicly available datasets we show that our methods are able to significantly improve the accuracy of the region-based model.

Description: In this paper we address the problem of finding the most probable state of a discrete Markov random field (MRF), also known as the MRF energy minimization problem. The task is known to be NP-hard in general and its practical importance motivates numerous approximate algorithms. We propose a submodular relaxation approach (SMR) based on a Lagrangian relaxation of the initial problem. Unlike the dual decomposition approach of Komodakis et al. [29] SMR does not decompose the graph structure of the initial problem but constructs a submodular energy that is minimized within the Lagrangian relaxation. Our approach is applicable to both pairwise and high-order MRFs and allows to take into account global potentials of certain types. We study theoretical properties of the proposed approach and evaluate it experimentally.

Description: Higher-order Markov Random Fields, which can capture important properties of natural images, have become increasingly important in computer vision. While graph cuts work well for first-order MRF’s, until recently they have rarely been effective for higher-order MRF’s. Ishikawa’s graph cut technique [1] , [2] shows great promise for many higher-order MRF’s. His method transforms an arbitrary higher-order MRF with binary labels into a first-order one with the same minima. If all the terms are submodular the exact solution can be easily found; otherwise, pseudoboolean optimization techniques can produce an optimal labeling for a subset of the variables. We present a new transformation with better performance than [1] , [2] , both theoretically and experimentally. While [1] , [2] transforms each higher-order term independently, we use the underlying hypergraph structure of the MRF to transform a group of terms at once. For $n$ binary variables, each of which appears in terms with $k$ other variables, at worst we produce $n$ non-submodular terms, while [1] , [2] produces $O(- k)$ . We identify a local completeness property under which our method perform even better, and show that under certain assumptions several important vision problems (including common variants of fusion moves) have this property. We show experimentally that our method produces smaller weight of non-submodular edges, and that this metric is directly related to the effectiveness of QPBO [3] . Running on the same field of experts dataset used in [1] , [2] we optimally label significantly more variables (96 versus 80 percent) and converge more rapidly to a lower energy. Preliminary experiments suggest that some other higher-order MRF’s used in stereo [4] and segmentation [5] are also locally complete and would thus benefit from our work.

Description: We introduce a conceptually novel structured prediction model, GPstruct , which is kernelized, non-parametric and Bayesian, by design. We motivate the model with respect to existing approaches, among others, conditional random fields (CRFs), maximum margin Markov networks (M $^3$ N), and structured support vector machines (SVMstruct), which embody only a subset of its properties. We present an inference procedure based on Markov Chain Monte Carlo. The framework can be instantiated for a wide range of structured objects such as linear chains, trees, grids, and other general graphs. As a proof of concept, the model is benchmarked on several natural language processing tasks and a video gesture segmentation task involving a linear chain structure. We show prediction accuracies for GPstruct which are comparable to or exceeding those of CRFs and SVMstruct.

Description: In this paper, we present three improvements to a three-point third order variant of Newton’s method derived from the Simpson rule. The first one is a fifth order method using the same number of functional evaluations as the third order method, the second one is a four-point 10th order method and the last one is a five-point 20th order method. In terms of computational point of view, our methods require four evaluations (one function and three first derivatives) to get fifth order, five evaluations (two functions and three derivatives) to get 10th order and six evaluations (three functions and three derivatives) to get 20th order. Hence, these methods have efficiency indexes of 1.495, 1.585 and 1.648, respectively which are better than the efficiency index of 1.316 of the third order method. We test the methods through some numerical experiments which show that the 20th order method is very efficient.

Description: Improving the quality of degraded images is a key problem in image processing, but the breadth of the problem leads to domain-specific approaches for tasks such as super-resolution and compression artifact removal. Recent approaches have shown that a general approach is possible by learning application-specific models from examples; however, learning models sophisticated enough to generate high-quality images is computationally expensive, and so specific per-application or per-dataset models are impractical. To solve this problem, we present an efficient semi-local approximation scheme to large-scale Gaussian processes. This allows efficient learning of task-specific image enhancements from example images without reducing quality. As such, our algorithm can be easily customized to specific applications and datasets, and we show the efficiency and effectiveness of our approach across five domains: single-image super-resolution for scene, human face, and text images, and artifact removal in JPEG- and JPEG 2000-encoded images.

Description: Parsimony, including sparsity and low rank, has been shown to successfully model data in numerous machine learning and signal processing tasks. Traditionally, such modeling approaches rely on an iterative algorithm that minimizes an objective function with parsimony-promoting terms. The inherently sequential structure and data-dependent complexity and latency of iterative optimization constitute a major limitation in many applications requiring real-time performance or involving large-scale data. Another limitation encountered by these modeling techniques is the difficulty of their inclusion in discriminative learning scenarios. In this work, we propose to move the emphasis from the model to the pursuit algorithm, and develop a process-centric view of parsimonious modeling, in which a learned deterministic fixed-complexity pursuit process is used in lieu of iterative optimization. We show a principled way to construct learnable pursuit process architectures for structured sparse and robust low rank models, derived from the iteration of proximal descent algorithms. These architectures learn to approximate the exact parsimonious representation at a fraction of the complexity of the standard optimization methods. We also show that appropriate training regimes allow to naturally extend parsimonious models to discriminative settings. State-of-the-art results are demonstrated on several challenging problems in image and audio processing with several orders of magnitude speed-up compared to the exact optimization algorithms.

Description: CANDECOMP/PARAFAC (CP) tensor factorization of incomplete data is a powerful technique for tensor completion through explicitly capturing the multilinear latent factors. The existing CP algorithms require the tensor rank to be manually specified, however, the determination of tensor rank remains a challenging problem especially for CP rank . In addition, existing approaches do not take into account uncertainty information of latent factors, as well as missing entries. To address these issues, we formulate CP factorization using a hierarchical probabilistic model and employ a fully Bayesian treatment by incorporating a sparsity-inducing prior over multiple latent factors and the appropriate hyperpriors over all hyperparameters, resulting in automatic rank determination. To learn the model, we develop an efficient deterministic Bayesian inference algorithm, which scales linearly with data size. Our method is characterized as a tuning parameter-free approach, which can effectively infer underlying multilinear factors with a low-rank constraint, while also providing predictive distributions over missing entries. Extensive simulations on synthetic data illustrate the intrinsic capability of our method to recover the ground-truth of CP rank and prevent the overfitting problem, even when a large amount of entries are missing. Moreover, the results from real-world applications, including image inpainting and facial image synthesis, demonstrate that our method outperforms state-of-the-art approaches for both tensor factorization and tensor completion in terms of predictive performance.

Description: Existing deep convolutional neural networks (CNNs) require a fixed-size (e.g., 224 $times$ 224) input image. This requirement is “artificial” and may reduce the recognition accuracy for the images or sub-images of an arbitrary size/scale. In this work, we equip the networks with another pooling strategy, “spatial pyramid pooling”, to eliminate the above requirement. The new network structure, called SPP-net, can generate a fixed-length representation regardless of image size/scale. Pyramid pooling is also robust to object deformations. With these advantages, SPP-net should in general improve all CNN-based image classification methods. On the ImageNet 2012 dataset, we demonstrate that SPP-net boosts the accuracy of a variety of CNN architectures despite their different designs. On the Pascal VOC 2007 and Caltech101 datasets, SPP-net achieves state-of-the-art classification results using a single full-image representation and no fine-tuning. The power of SPP-net is also significant in object detection. Using SPP-net, we compute the feature maps from the entire image only once, and then pool features in arbitrary regions (sub-images) to generate fixed-length representations for training the detectors. This method avoids repeatedly computing the convolutional features. In processing test images, our method is 24-102 $times$ faster than the R-CNN method, while achieving better or comparable accuracy on Pascal VOC 2007. In ImageNet Large Scale Visual Recognition Challenge (ILSVRC) 2014, our methods rank #2 in object detection and #3 in image classification among all 38 teams. This manuscript also introduces the improvement made for this - ompetition.

Description: We present efficient graph cut algorithms for three problems: (1) finding a region in an image, so that the histogram (or distribution) of an image feature within the region most closely matches a given model; (2) co-segmentation of image pairs and (3) interactive image segmentation with a user-provided bounding box. Each algorithm seeks the optimum of a global cost function based on the Bhattacharyya measure, a convenient alternative to other matching measures such as the Kullback–Leibler divergence. Our functionals are not directly amenable to graph cut optimization as they contain non-linear functions of fractional terms, which make the ensuing optimization problems challenging. We first derive a family of parametric bounds of the Bhattacharyya measure by introducing an auxiliary labeling. Then, we show that these bounds are auxiliary functions of the Bhattacharyya measure, a result which allows us to solve each problem efficiently via graph cuts. We show that the proposed optimization procedures converge within very few graph cut iterations. Comprehensive and various experiments, including quantitative and comparative evaluations over two databases, demonstrate the advantages of the proposed algorithms over related works in regard to optimality, computational load, accuracy and flexibility.

Description: Robust small target detection of low signal-to-noise ratio (SNR) is very important in infrared search and track applications for self-defense or attacks. Due to the complex background, current algorithms have some unsolved issues with false alarm rate. In order to reduce the false alarm rate, an infrared small target detection algorithm based on saliency detection and support vector machine was proposed. Firstly, we detect salient regions that may contain targets with phase spectrum Fourier transform (PFT) approach. Then, target recognition was performed in the salient regions. Experimental results show the proposed algorithm has ideal robustness and efficiency for real infrared small target detection applications.

Description: In dynamic propagation environments, beamforming algorithms may suffer from strong interference, steering vector mismatches, a low convergence speed and a high computational complexity. Reduced-rank signal processing techniques provide a way to address the problems mentioned above. This paper presents a low-complexity robust data-dependent dimensionality reduction based on an iterative optimization with steering vector perturbation (IOVP) algorithm for reduced-rank beamforming and steering vector estimation. The proposed robust optimization procedure jointly adjusts the parameters of a rank reduction matrix and an adaptive beamformer. The optimized rank reduction matrix projects the received signal vector onto a subspace with lower dimension. The beamformer/steering vector optimization is then performed in a reduced dimension subspace. We devise efficient stochastic gradient and recursive least-squares algorithms for implementing the proposed robust IOVP design. The proposed robust IOVP beamforming algorithms result in a faster convergence speed and an improved performance. Simulation results show that the proposed IOVP algorithms outperform some existing full-rank and reduced-rank algorithms with a comparable complexity.

Description: Recently, wireless sensor networks (WSNs) have drawn great interest due to their outstanding monitoring and management potential in medical, environmental and industrial applications. Most of the applications that employ WSNs demand all of the sensor nodes to run on a common time scale, a requirement that highlights the importance of clock synchronization. The clock synchronization problem in WSNs is inherently related to parameter estimation. The accuracy of clock synchronization algorithms depends essentially on the statistical properties of the parameter estimation algorithms. Recently, studies dedicated to the estimation of synchronization parameters, such as clock offset and skew, have begun to emerge in the literature. The aim of this article is to provide an overview of the state-of-the-art clock synchronization algorithms for WSNs from a statistical signal processing point of view. This article focuses on describing the key features of the class of clock synchronization algorithms that exploit the traditional two-way message (signal) exchange mechanism. Upon introducing the two-way message exchange mechanism, the main clock offset estimation algorithms for pairwise synchronization of sensor nodes are first reviewed, and their performance is compared. The class of fully-distributed clock offset estimation algorithms for network-wide synchronization is then surveyed. The paper concludes with a list of open research problems pertaining to clock synchronization of WSNs.

Description: Motivation: Very large studies are required to provide sufficiently big sample sizes for adequately powered association analyses. This can be an expensive undertaking and it is important that an accurate sample size is identified. For more realistic sample size calculation and power analysis, the impact of unmeasured aetiological determinants and the quality of measurement of both outcome and explanatory variables should be taken into account. Conventional methods to analyse power use closed-form solutions that are not flexible enough to cater for all of these elements easily. They often result in a potentially substantial overestimation of the actual power. Results: In this article, we describe the Estimating Sample-size and Power in R by Exploring Simulated Study Outcomes tool that allows assessment errors in power calculation under various biomedical scenarios to be incorporated. We also report a real world analysis where we used this tool to answer an important strategic question for an existing cohort. Availability and implementation: The software is available for online calculation and downloads at http://espresso-research.org . The code is freely available at https://github.com/ESPRESSO-research . Contact: louqman@gmail.com Supplementary information: Supplementary data are available at Bioinformatics online.

Description: Motivation: Given the importance of non-coding RNAs to cellular regulatory functions, it would be highly desirable to have accurate computational prediction of RNA 3D structure, a task which remains challenging. Even for a short RNA sequence, the space of tertiary conformations is immense; existing methods to identify native-like conformations mostly resort to random sampling of conformations to achieve computational feasibility. However, native conformations may not be examined and prediction accuracy may be compromised due to sampling. State-of-the-art methods have yet to deliver satisfactory predictions for RNAs of length beyond 50 nucleotides. Results: This paper presents a method to tackle a key step in the RNA 3D structure prediction problem, the prediction of the nucleotide interactions that constitute the desired 3D structure. The research is based on a novel graph model, called a backbone k-tree , to tightly constrain the nucleotide interaction relationships considered for RNA 3D structures. It is shown that the new model makes it possible to efficiently predict the optimal set of nucleotide interactions (including the non-canonical interactions in all recently revealed families) from the query sequence along with known or predicted canonical basepairs. The preliminary results indicate that in most cases the new method can predict with a high accuracy the nucleotide interactions that constitute the 3D structure of the query sequence. It thus provides a useful tool for the accurate prediction of RNA 3D structure. Availability and Implementation: The source package for BkTree is available at http://rna-informatics.uga.edu/index.php?f=software&p=BkTree . Contact: lding@uga.edu or cai@cs.uga.edu Supplementary information: Supplementary data are available at Bioinformatics online.

Description: Motivation: RNAs fold into complex structures that are integral to the diverse mechanisms underlying RNA regulation of gene expression. Recent development of transcriptome-wide RNA structure profiling through the application of structure-probing enzymes or chemicals combined with high-throughput sequencing has opened a new field that greatly expands the amount of in vitro and in vivo RNA structural information available. The resultant datasets provide the opportunity to investigate RNA structural information on a global scale. However, the analysis of high-throughput RNA structure profiling data requires considerable computational effort and expertise. Results: We present a new platform, StructureFold, that provides an integrated computational solution designed specifically for large-scale RNA structure mapping and reconstruction across any transcriptome. StructureFold automates the processing and analysis of raw high-throughput RNA structure profiling data, allowing the seamless incorporation of wet-bench structural information from chemical probes and/or ribonucleases to restrain RNA secondary structure prediction via the RNAstructure and ViennaRNA package algorithms. StructureFold performs reads mapping and alignment, normalization and reactivity derivation, and RNA structure prediction in a single user-friendly web interface or via local installation. The variation in transcript abundance and length that prevails in living cells and consequently causes variation in the counts of structure-probing events between transcripts is accounted for. Accordingly, StructureFold is applicable to RNA structural profiling data obtained in vivo as well as to in vitro or in silico datasets. StructureFold is deployed via the Galaxy platform. Availability and Implementation: StructureFold is freely available as a component of Galaxy available at: https://usegalaxy.org/ . Contact: yxt148@psu.edu or sma3@psu.edu Supplementary information: Supplementary data are available at Bioinformatics online.

Description: : Structural variations (SVs) are large genomic rearrangements that vary significantly in size, making them challenging to detect with the relatively short reads from next-generation sequencing (NGS). Different SV detection methods have been developed; however, each is limited to specific kinds of SVs with varying accuracy and resolution. Previous works have attempted to combine different methods, but they still suffer from poor accuracy particularly for insertions. We propose MetaSV, an integrated SV caller which leverages multiple orthogonal SV signals for high accuracy and resolution. MetaSV proceeds by merging SVs from multiple tools for all types of SVs. It also analyzes soft-clipped reads from alignment to detect insertions accurately since existing tools underestimate insertion SVs. Local assembly in combination with dynamic programming is used to improve breakpoint resolution. Paired-end and coverage information is used to predict SV genotypes. Using simulation and experimental data, we demonstrate the effectiveness of MetaSV across various SV types and sizes. Availability and implementation: Code in Python is at http://bioinform.github.io/metasv/ . Contact: rd@bina.com Supplementary information: Supplementary data are available at Bioinformatics online.

Description: : We present a web server to predict the functional effect of single or multiple amino acid substitutions, insertions and deletions using the prediction tool PROVEAN. The server provides rapid analysis of protein variants from any organisms, and also supports high-throughput analysis for human and mouse variants at both the genomic and protein levels. Availability and implementation : The web server is freely available and open to all users with no login requirements at http://provean.jcvi.org . Contact: achan@jcvi.org Supplementary information: Supplementary data are available at Bioinformatics online.

Description: Motivation: In attempts to determine the genetic causes of human disease, researchers are often faced with a large number of candidate genes. Linkage studies can point to a genomic region containing hundreds of genes, while the high-throughput sequencing approach will often identify a great number of non-synonymous genetic variants. Since systematic experimental verification of each such candidate gene is not feasible, a method is needed to decide which genes are worth investigating further. Computational gene prioritization presents itself as a solution to this problem, systematically analyzing and sorting each gene from the most to least likely to be the disease-causing gene, in a fraction of the time it would take a researcher to perform such queries manually. Results: Here, we present Gene TIssue Expression Ranker (GeneTIER), a new web-based application for candidate gene prioritization. GeneTIER replaces knowledge-based inference traditionally used in candidate disease gene prioritization applications with experimental data from tissue-specific gene expression datasets and thus largely overcomes the bias toward the better characterized genes/diseases that commonly afflict other methods. We show that our approach is capable of accurate candidate gene prioritization and illustrate its strengths and weaknesses using case study examples. Availability and Implementation: Freely available on the web at http://dna.leeds.ac.uk/GeneTIER/. Contact: umaan@leeds.ac.uk Supplementary information: Supplementary data are available at Bioinformatics online.

Description: Motivation: The role of personalized medicine and target treatment in the clinical management of cancer patients has become increasingly important in recent years. This has made the task of precise histological substratification of cancers crucial. Increasingly, genomic data are being seen as a valuable classifier. Specifically, copy number alteration (CNA) profiles generated by next-generation sequencing (NGS) can become a determinant for tumours subtyping. The principle purpose of this study is to devise a model with good prediction capability for the tumours histological subtypes as a function of both the patients covariates and their genome-wide CNA profiles from NGS data. Results: We investigate a logistic regression for modelling tumour histological subtypes as a function of the patients’ covariates and their CNA profiles, in a mixed model framework. The covariates, such as age and gender, are considered as fixed predictors and the genome-wide CNA profiles are considered as random predictors. We illustrate the application of this model in lung and oral cancer datasets, and the results indicate that the tumour histological subtypes can be modelled with a good fit. Our cross-validation indicates that the logistic regression exhibits the best prediction relative to other classification methods we considered in this study. The model also exhibits the best agreement in the prediction between smooth-segmented and circular binary-segmented CNA profiles. Availability and implementation: An R package to run a logistic regression is available in http://www1.maths.leeds.ac.uk/~arief/R/CNALR/ . Contact: a.gusnanto@leeds.ac.uk Supplementary information: Supplementary data are available at Bioinformatics online.

Description: : Metabolic network mapping is a widely used approach for integration of metabolomic experimental results with biological domain knowledge. However, current approaches can be limited by biochemical domain or pathway knowledge which results in sparse disconnected graphs for real world metabolomic experiments. MetaMapR integrates enzymatic transformations with metabolite structural similarity, mass spectral similarity and empirical associations to generate richly connected metabolic networks. This open source, web-based or desktop software, written in the R programming language, leverages KEGG and PubChem databases to derive associations between metabolites even in cases where biochemical domain or molecular annotations are unknown. Network calculation is enhanced through an interface to the Chemical Translation System, which allows metabolite identifier translation between 〉200 common biochemical databases. Analysis results are presented as interactive visualizations or can be exported as high-quality graphics and numerical tables which can be imported into common network analysis and visualization tools. Availability and Implementation: Freely available at http://dgrapov.github.io/MetaMapR/ . Requires R and a modern web browser. Installation instructions, tutorials and application examples are available at http://dgrapov.github.io/MetaMapR/ . Contact: ofiehn@ucdavis.edu

Description: Motivation: The Cellular Phenotype Database (CPD) is a repository for data derived from high-throughput systems microscopy studies. The aims of this resource are: (i) to provide easy access to cellular phenotype and molecular localization data for the broader research community; (ii) to facilitate integration of independent phenotypic studies by means of data aggregation techniques, including use of an ontology and (iii) to facilitate development of analytical methods in this field. Results: In this article we present CPD, its data structure and user interface, propose a minimal set of information describing RNA interference experiments, and suggest a generic schema for management and aggregation of outputs from phenotypic or molecular localization experiments. The database has a flexible structure for management of data from heterogeneous sources of systems microscopy experimental outputs generated by a variety of protocols and technologies and can be queried by gene, reagent, gene attribute, study keywords, phenotype or ontology terms. Availability and implementation: CPD is developed as part of the Systems Microscopy Network of Excellence and is accessible at http://www.ebi.ac.uk/fg/sym . Contact: jes@ebi.ac.uk or ugis@ebi.ac.uk Supplementary information: Supplementary data are available at Bioinformatics online.

Description: Network coding is an emerging technique known to improve the network performance in many aspects. In Vehicular Ad-hoc Networks (VANET), the bandwidth is considered to be one of the most important network resources. In this paper, we propose a network coding technique to improve the bandwidth utilization for non-safety applications in VANET. In a scenario where there are two sources broadcasting the data into the same area at the same time, the relay will use the network coding technique to decrease the number of rebroadcasting events and the consumption of the bandwidth, However, a fundamental problem for the relay when it receives a packet, is whether to wait for a coding opportunity and save the bandwidth or send the packet directly and reduce the delay. In order to address such tradeoff, we introduce two versions of our protocol, namely buffer size control scheme (BSCS) and time control scheme (TCS); by both versions we aim to control the delay that is experienced by the packet at each hop, while achieving better bandwidth utilization.Up to 38 % improvement in the bandwidth utilization has been recorded, and both schemes have shown a considerable amount of control on the imposed delay.

Description: Long-Term Evolution (LTE) was implemented to fulfill and satisfy users’ needs as well as their demands for an improvised, fast and efficient Quality of service (QoS). A minimal aggregate of waiting time in return would give users a better Quality of experience (QoE). Real-time service packet scheduling is an important process in allocating resources to users. An efficient packet scheduling scheme will be able to cater fairly and efficiently to its users in the LTE network. Hence, studies are performed focusing on real-time traffic which includes video as well as Voice over Internet Protocol (VoIP) transmissions. In this work, the existing exponential rule (EXP rule) is utilized to benchmark our proposed packet scheduling techniques so that we are able to further evaluate the scheduling performance. In response to the increasing likelihood of losing packets in the EXP rule’s algorithm and maximizing the throughput rate, several schemes have been experimented with. The proposed schemes include 1) simplified EXP rule (sEXP Rule), 2) modified EXP rule (mEXP Rule), 3) EXP rule with maximum throughput (MT) (EXP_MT Rule), and 4) enhanced EXP rule with MT (E2M). By adding MT as a weight to the EXP rule, the throughput is maximized, thus providing higher throughput rates for real-time and non-real-time traffic. The simulation results show that the sEXP rule has a better performance in throughput, packet loss rate (PLR), and spectral efficiency for video traffic. Aside from this, our proposed E2M rule performs better than the benchmark EXP rule and outperforms the other proposed schemes, as well. It is observed that the E2M rule has better QoS support for real-time transmission in terms of delay, packet loss, throughput and spectral efficiency, within the LTE network. Hence, our proposed E2M rule is an enhancement of the benchmark EXP rule, which is commonly used in LTE packet scheduling.

Description: : Specific recognition of DNA by proteins is a crucial step of many biological processes. PDIviz is a plugin for the PyMOL molecular visualization system that analyzes protein–DNA binding interfaces by comparing the solvent accessible surface area of the complex against the free protein and free DNA. The plugin provides three distinct three-dimensional visualization modes to highlight interactions with DNA bases and backbone, major and minor groove, and with atoms of different pharmacophoric type (hydrogen bond donors/acceptors, hydrophobic and thymine methyl). Each mode comes in three styles to focus the visual analysis on the protein or DNA side of the interface, or on the nucleotide sequence. PDIviz allows for the generation of publication quality images, all calculated data can be written to disk, and a command line interface is provided for automating tasks. The plugin may be helpful for the detailed identification of regions involved in DNA base and shape readout, and can be particularly useful in rapidly pinpointing the overall mode of interaction. Availability and implementation: Freely available at http://melolab.org/pdiviz/ as a PyMOL plugin. Tested with incentive, educational, and open source versions of PyMOL on Windows, Mac and Linux systems. Contact: aschueller@bio.puc.cl Supplementary Information: Supplementary data are available at Bioinformatics online.

Description: In delay tolerant networks (DTNs), the network may not be fully connected at any instant of time, but connections occurring between nodes at different times make the network connected through the entire time continuum. In such a case, traditional routing methods fail to operate because there are no contemporaneous end-to-end paths between sources and destinations. This study examines the routing in DTNs where connections arise in a periodic nature. We analyze various levels of periodicity in order to meet the requirements of different network models. We propose different routing algorithms for different kinds of periodic connections. Our proposed routing methods guarantee the earliest delivery time and minimum hop-count, simultaneously. We evaluate our routing schemes via extensive simulation experiments and compare them to some other popular routing approaches proposed for DTNs. Our evaluations show the feasibility and effectiveness of our schemes as viable routing methods for delay tolerant networks.

Description: : In next generation sequencing (NGS)-based genetic studies, researchers typically perform genotype calling first and then apply standard genotype-based methods for association testing. However, such a two-step approach ignores genotype calling uncertainty in the association testing step and may incur power loss and/or inflated type-I error. In the recent literature, a few robust and efficient likelihood based methods including both likelihood ratio test (LRT) and score test have been proposed to carry out association testing without intermediate genotype calling. These methods take genotype calling uncertainty into account by directly incorporating genotype likelihood function (GLF) of NGS data into association analysis. However, existing LRT methods are computationally demanding or do not allow covariate adjustment; while existing score tests are not applicable to markers with low minor allele frequency (MAF). We provide an LRT allowing flexible covariate adjustment, develop a statistically more powerful score test and propose a combination strategy (UNC combo) to leverage the advantages of both tests. We have carried out extensive simulations to evaluate the performance of our proposed LRT and score test. Simulations and real data analysis demonstrate the advantages of our proposed combination strategy: it offers a satisfactory trade-off in terms of computational efficiency, applicability (accommodating both common variants and variants with low MAF) and statistical power, particularly for the analysis of quantitative trait where the power gain can be up to ~60% when the causal variant is of low frequency (MAF 〈 0.01). Availability and implementation : UNC combo and the associated R files, including documentation, examples, are available at http://www.unc.edu/~yunmli/UNCcombo/ Contact: yunli@med.unc.edu Supplementary information: Supplementary data are available at Bioinformatics online.

Description: Motivation : Recombined T- and B-cell receptor repertoires are increasingly being studied using next generation sequencing (NGS) in order to interrogate the repertoire composition as well as changes in the distribution of receptor clones under different physiological and disease states. This type of analysis requires efficient and unambiguous clonotype assignment to a large number of NGS read sequences, including the identification of the incorporated V and J gene segments and the CDR3 sequence. Current tools have deficits with respect to performance, accuracy and documentation of their underlying algorithms and usage. Results : We present IMSEQ, a method to derive clonotype repertoires from NGS data with sophisticated routines for handling errors stemming from PCR and sequencing artefacts. The application can handle different kinds of input data originating from single- or paired-end sequencing in different configurations and is generic regarding the species and gene of interest. We have carefully evaluated our method with simulated and real world data and show that IMSEQ is superior to other tools with respect to its clonotyping as well as standalone error correction and runtime performance. Availability and implementation: IMSEQ was implemented in C++ using the SeqAn library for efficient sequence analysis. It is freely available under the GPLv2 open source license and can be downloaded at www.imtools.org . Supplementary information : Supplementary data are available at Bioinformatics online. Contact: lkuchenb@inf.fu-berlin.de or peter.robinson@charite.de

Description: Motivation: Interactions between amino acids are important determinants of the structure, stability and function of proteins. Several tools have been developed for the identification and analysis of such interactions in proteins based on the extensive studies carried out on high-resolution structures from Protein Data Bank (PDB). Although these tools allow users to identify and analyze interactions, analysis can only be performed on one structure at a time. This makes it difficult and time consuming to study the significance of these interactions on a large scale. Results: SpeeDB is a web-based tool for the identification of protein structures based on structural properties. SpeeDB queries are executed on all structures in the PDB at once, quickly enough for interactive use. SpeeDB includes standard queries based on published criteria for identifying various structures: disulphide bonds, catalytic triads and aromatic–aromatic, sulphur–aromatic, cation– and ionic interactions. Users can also construct custom queries in the user interface without any programming. Results can be downloaded in a Comma Separated Value (CSV) format for further analysis with other tools. Case studies presented in this article demonstrate how SpeeDB can be used to answer various biological questions. Analysis of human proteases revealed that disulphide bonds are the predominant type of interaction and are located close to the active site, where they promote substrate specificity. When comparing the two homologous G protein-coupled receptors and the two protein kinase paralogs analyzed, the differences in the types of interactions responsible for stability accounts for the differences in specificity and functionality of the structures. Availability and implementation: SpeeDB is available at http://www.parallelcomputing.ca as a web service. Contact: d@drobilla.net Supplementary Information: Supplementary data are available at Bioinformatics online.

Description: : Seq2pathway is an R/Python wrapper for pathway (or functional gene-set) analysis of genomic loci, adapted for advances in genome research. Seq2pathway associates the biological significance of genomic loci with their target transcripts and then summarizes the quantified values on the gene-level into pathway scores. It is designed to isolate systematic disturbances and common biological underpinnings from next-generation sequencing (NGS) data. Seq2pathway offers Bioconductor users enhanced capability in discovering collective pathway effects caused by both coding genes and cis-regulation of non-coding elements. Availability and implementation: The package is freely available at http://www.bioconductor.org/packages/release/bioc/html/seq2pathway.html . Contact : xyang2@uchicago.edu Supplementary information: Supplementary data are available at Bioinformatics online.

Description: : Aggregation plots are frequently used to evaluate signal distributions at user-interested points in ChIP-Seq data analysis. agplus, a new and simple command-line tool, enables rapid and flexible generation of text tables tailored for aggregation plots from which users can easily design multiple groups based on user-definitions such as regulatory regions or transcription initiation sites. Availability and Implementation: This software is implemented in Ruby, supported on Linux and Mac OSX, and freely available at http://github.com/kazumits/agplus Contact: yohkawa@epigenetics.med.kyushu-u.ac.jp

Description: : We devise a novel inference algorithm to effectively solve the cancer progression model reconstruction problem. Our empirical analysis of the accuracy and convergence rate of our algorithm, CAncer PRogression Inference (CAPRI), shows that it outperforms the state-of-the-art algorithms addressing similar problems. Motivation: Several cancer-related genomic data have become available (e.g. The Cancer Genome Atlas , TCGA) typically involving hundreds of patients. At present, most of these data are aggregated in a cross-sectional fashion providing all measurements at the time of diagnosis. Our goal is to infer cancer ‘progression’ models from such data. These models are represented as directed acyclic graphs (DAGs) of collections of ‘selectivity’ relations, where a mutation in a gene A ‘selects’ for a later mutation in a gene B. Gaining insight into the structure of such progressions has the potential to improve both the stratification of patients and personalized therapy choices. Results: The CAPRI algorithm relies on a scoring method based on a probabilistic theory developed by Suppes, coupled with bootstrap and maximum likelihood inference. The resulting algorithm is efficient, achieves high accuracy and has good complexity, also, in terms of convergence properties. CAPRI performs especially well in the presence of noise in the data, and with limited sample sizes. Moreover CAPRI, in contrast to other approaches, robustly reconstructs different types of confluent trajectories despite irregularities in the data. We also report on an ongoing investigation using CAPRI to study atypical Chronic Myeloid Leukemia , in which we uncovered non trivial selectivity relations and exclusivity patterns among key genomic events. Availability and implementation: CAPRI is part of the TRanslational ONCOlogy R package and is freely available on the web at: http://bimib.disco.unimib.it/index.php/Tronco Contact: daniele.ramazzotti@disco.unimib.it Supplementary information: Supplementary data are available at Bioinformatics online.

Description: Motivation: Model organisms play critical roles in biomedical research of human diseases and drug development. An imperative task is to translate information/knowledge acquired from model organisms to humans. In this study, we address a trans-species learning problem: predicting human cell responses to diverse stimuli, based on the responses of rat cells treated with the same stimuli. Results: We hypothesized that rat and human cells share a common signal-encoding mechanism but employ different proteins to transmit signals, and we developed a bimodal deep belief network and a semi-restricted bimodal deep belief network to represent the common encoding mechanism and perform trans-species learning. These ‘deep learning’ models include hierarchically organized latent variables capable of capturing the statistical structures in the observed proteomic data in a distributed fashion. The results show that the models significantly outperform two current state-of-the-art classification algorithms. Our study demonstrated the potential of using deep hierarchical models to simulate cellular signaling systems. Availability and implementation: The software is available at the following URL: http://pubreview.dbmi.pitt.edu/TransSpeciesDeepLearning/ . The data are available through SBV IMPROVER website, https://www.sbvimprover.com/challenge-2/overview , upon publication of the report by the organizers. Contact : xinghua@pitt.edu Supplementary information: Supplementary data are available at Bioinformatics online.

Description: Motivation: Identification of differentially expressed genes is an important step in extracting knowledge from gene expression profiling studies. The raw expression data from microarray and other high-throughput technologies is deposited into the Gene Expression Omnibus (GEO) and served as Simple Omnibus Format in Text (SOFT) files. However, to extract and analyze differentially expressed genes from GEO requires significant computational skills. Results: Here we introduce GEO2Enrichr, a browser extension for extracting differentially expressed gene sets from GEO and analyzing those sets with Enrichr, an independent gene set enrichment analysis tool containing over 70 000 annotated gene sets organized into 75 gene-set libraries. GEO2Enrichr adds JavaScript code to GEO web-pages; this code scrapes user selected accession numbers and metadata, and then, with one click, users can submit this information to a web-server application that downloads the SOFT files, parses, cleans and normalizes the data, identifies the differentially expressed genes, and then pipes the resulting gene lists to Enrichr for downstream functional analysis. GEO2Enrichr opens a new avenue for adding functionality to major bioinformatics resources such GEO by integrating tools and resources without the need for a plug-in architecture. Importantly, GEO2Enrichr helps researchers to quickly explore hypotheses with little technical overhead, lowering the barrier of entry for biologists by automating data processing steps needed for knowledge extraction from the major repository GEO. Availability and implementation: GEO2Enrichr is an open source tool, freely available for installation as browser extensions at the Chrome Web Store and FireFox Add-ons. Documentation and a browser independent web application can be found at http://amp.pharm.mssm.edu/g2e/ . Contact: avi.maayan@mssm.edu

Description: : We report the creation of Drug Signatures Database (DSigDB), a new gene set resource that relates drugs/compounds and their target genes, for gene set enrichment analysis (GSEA). DSigDB currently holds 22 527 gene sets, consists of 17 389 unique compounds covering 19 531 genes. We also developed an online DSigDB resource that allows users to search, view and download drugs/compounds and gene sets. DSigDB gene sets provide seamless integration to GSEA software for linking gene expressions with drugs/compounds for drug repurposing and translational research. Availability and implementation: DSigDB is freely available for non-commercial use at http://tanlab.ucdenver.edu/DSigDB . Supplementary information: Supplementary data are available at Bioinformatics online. Contact: aikchoon.tan@ucdenver.edu

Description: : We describe the implementation of the method introduced by Chambaz et al. in 2012. We also demonstrate its genome-wide application to the integrative search of new regions with strong association between DNA copy number and gene expression accounting for DNA methylation in breast cancers. Availability and implementation: An open-source R package tmle.npvi is available from CRAN ( http://cran.r-project.org/ ). Contact: pierre.neuvial@genopole.cnrs.fr

Description: Motivation: Genes with indispensable functions are identified as essential; however, the traditional gene-level studies of essentiality have several limitations. In this study, we characterized gene essentiality from a new perspective of protein domains, the independent structural or functional units of a polypeptide chain. Results: To identify such essential domains, we have developed an Expectation–Maximization (EM) algorithm-based Essential Domain Prediction (EDP) Model. With simulated datasets, the model provided convergent results given different initial values and offered accurate predictions even with noise. We then applied the EDP model to six microbial species and predicted 1879 domains to be essential in at least one species, ranging 10–23% in each species. The predicted essential domains were more conserved than either non-essential domains or essential genes. Comparing essential domains in prokaryotes and eukaryotes revealed an evolutionary distance consistent with that inferred from ribosomal RNA. When utilizing these essential domains to reproduce the annotation of essential genes, we received accurate results that suggest protein domains are more basic units for the essentiality of genes. Furthermore, we presented several examples to illustrate how the combination of essential and non-essential domains can lead to genes with divergent essentiality. In summary, we have described the first systematic analysis on gene essentiality on the level of domains. Contact: huilu.bioinfo@gmail.com or Long.Lu@cchmc.org Supplementary Information: Supplementary data are available at Bioinformatics online.

Description: Motivation: Information-theoretic and compositional analysis of biological sequences, in terms of k -mer dictionaries, has a well established role in genomic and proteomic studies. Much less so in epigenomics, although the role of k -mers in chromatin organization and nucleosome positioning is particularly relevant. Fundamental questions concerning the informational content and compositional structure of nucleosome favouring and disfavoring sequences with respect to their basic building blocks still remain open. Results: We present the first analysis on the role of k -mers in the composition of nucleosome enriched and depleted genomic regions (NER and NDR for short) that is: (i) exhaustive and within the bounds dictated by the information-theoretic content of the sample sets we use and (ii) informative for comparative epigenomics. We analize four different organisms and we propose a paradigmatic formalization of k -mer dictionaries, providing two different and complementary views of the k -mers involved in NER and NDR. The first extends well known studies in this area, its comparative nature being its major merit. The second, very novel, brings to light the rich variety of k -mers involved in influencing nucleosome positioning, for which an initial classification in terms of clusters is also provided. Although such a classification offers many insights, the following deserves to be singled-out: short poly(dA:dT) tracts are reported in the literature as fundamental for nucleosome depletion, however a global quantitative look reveals that their role is much less prominent than one would expect based on previous studies. Availability and implementation: Dictionaries, clusters and Supplementary Material are available online at http://math.unipa.it/rombo/epigenomics/ . Contact: simona.rombo@unipa.it Supplementary information: Supplementary data are available at Bioinformatics online.

Description: Motivation: The number of reported genetic variants is rapidly growing, empowered by ever faster accumulation of next-generation sequencing data. A major issue is comparability. Standards that address the combined problem of inaccurately predicted breakpoints and repeat-induced ambiguities are missing. This decisively lowers the quality of ‘consensus’ callsets and hampers the removal of duplicate entries in variant databases, which can have deleterious effects in downstream analyses. Results: We introduce a sound framework for comparison of deletions that captures both tool-induced inaccuracies and repeat-induced ambiguities. We present a maximum matching algorithm that outputs virtual duplicates among two sets of predictions/annotations. We demonstrate that our approach is clearly superior over ad hoc criteria, like overlap, and that it can reduce the redundancy among callsets substantially. We also identify large amounts of duplicate entries in the Database of Genomic Variants, which points out the immediate relevance of our approach. Availability and implementation: Implementation is open source and available from https://bitbucket.org/readdi/readdi Contact: roland.wittler@uni-bielefeld.de or t.marschall@mpi-inf.mpg.de Supplementary information: Supplementary data are available at Bioinformatics online.

Description: Motivation: Deep sequencing of clinical samples is now an established tool for the detection of infectious pathogens, with direct medical applications. The large amount of data generated produces an opportunity to detect species even at very low levels, provided that computational tools can effectively profile the relevant metagenomic communities. Data interpretation is complicated by the fact that short sequencing reads can match multiple organisms and by the lack of completeness of existing databases, in particular for viral pathogens. Here we present metaMix, a Bayesian mixture model framework for resolving complex metagenomic mixtures. We show that the use of parallel Monte Carlo Markov chains for the exploration of the species space enables the identification of the set of species most likely to contribute to the mixture. Results: We demonstrate the greater accuracy of metaMix compared with relevant methods, particularly for profiling complex communities consisting of several related species. We designed metaMix specifically for the analysis of deep transcriptome sequencing datasets, with a focus on viral pathogen detection; however, the principles are generally applicable to all types of metagenomic mixtures. Availability and implementation: metaMix is implemented as a user friendly R package, freely available on CRAN: http://cran.r-project.org/web/packages/metaMix Contact: sofia.morfopoulou.10@ucl.ac.uk Supplementary information: Supplementary data are available at Bionformatics online.

Description: Motivation: A detailed analysis of multidimensional NMR spectra of macromolecules requires the identification of individual resonances (peaks). This task can be tedious and time-consuming and often requires support by experienced users. Automated peak picking algorithms were introduced more than 25 years ago, but there are still major deficiencies/flaws that often prevent complete and error free peak picking of biological macromolecule spectra. The major challenges of automated peak picking algorithms is both the distinction of artifacts from real peaks particularly from those with irregular shapes and also picking peaks in spectral regions with overlapping resonances which are very hard to resolve by existing computer algorithms. In both of these cases a visual inspection approach could be more effective than a ‘blind’ algorithm. Results: We present a novel approach using computer vision (CV) methodology which could be better adapted to the problem of peak recognition. After suitable ‘training’ we successfully applied the CV algorithm to spectra of medium-sized soluble proteins up to molecular weights of 26 kDa and to a 130 kDa complex of a tetrameric membrane protein in detergent micelles. Our CV approach outperforms commonly used programs. With suitable training datasets the application of the presented method can be extended to automated peak picking in multidimensional spectra of nucleic acids or carbohydrates and adapted to solid-state NMR spectra. Availability and implementation: CV-Peak Picker is available upon request from the authors. Contact : gsw@mol.biol.ethz.ch ; michal.walczak@mol.biol.ethz.ch ; adam.gonczarek@pwr.edu.pl Supplementary information : Supplementary data are available at Bioinformatics online.

Description: : PsyGeNET (Psychiatric disorders and Genes association NETwork) is a knowledge platform for the exploratory analysis of psychiatric diseases and their associated genes. PsyGeNET is composed of a database and a web interface supporting data search, visualization, filtering and sharing. PsyGeNET integrates information from DisGeNET and data extracted from the literature by text mining, which has been curated by domain experts. It currently contains 2642 associations between 1271 genes and 37 psychiatric disease concepts. In its first release, PsyGeNET is focused on three psychiatric disorders: major depression, alcohol and cocaine use disorders. PsyGeNET represents a comprehensive, open access resource for the analysis of the molecular mechanisms underpinning psychiatric disorders and their comorbidities. Availability and implementation: The PysGeNET platform is freely available at http://www.psygenet.org/ . The PsyGeNET database is made available under the Open Database License ( http://opendatacommons.org/licenses/odbl/1.0/ ). Contact: lfurlong@imim.es Supplementary information : Supplementary data are available at Bioinformatics online.

Description: Due to rapid developments in mobile technology as well as various multimedia features like messaging, browsing, and streaming, user-created mobile contents are increasing, both in terms of quantity and quality, and at the same time are shared in real time. To get into step with such movements, new content-centric networking (CCN) has appeared. However, CCN has not taken the effect of consumer device movements into consideration. So, this paper proposes a partial path extension scheme to provide lower communication overhead, shorter download time, and lower network resource consumption in mobile consumer environments.

Description: In this paper we investigate some parallel variants of Broyden’s method and, for the basic variant, we present its convergence properties. The main result is that the behavior of the considered parallel Broyden’s variants is comparable with the classical parallel Newton method, and significantly better than the parallel Cimmino method, both for linear and nonlinear cases. The considered variants are also compared with two more recently proposed parallel Broyden’s method. Some numerical experiments are presented to illustrate the advantages and limits of the proposed algorithms.