ALBERT

Description: Review Article: On the relation between the seismic activity and the Hurst exponent of the geomagnetic field at the time of the 2000 Izu swarm Natural Hazards and Earth System Science, 13, 2189-2194, 2013 Author(s): F. Masci and J. N. Thomas Many papers document the observation of earthquake-related precursory signatures in geomagnetic field data. However, the significance of these findings is ambiguous because the authors did not adequately take into account that these signals could have been generated by other sources, and the seismogenic origin of these signals have not been validated by comparison with independent datasets. Thus, they are not reliable examples of magnetic disturbances induced by the seismic activity. Hayakawa et al. (2004) claim that at the time of the 2000 Izu swarm the Hurst exponent of the Ultra-Low-Frequency (ULF: 0.001–10 Hz) band of the geomagnetic field varied in accord with the energy released by the seismicity. The present paper demonstrates that the behaviour of the Hurst exponent was insufficiently investigated and also misinterpreted by the authors. We clearly show that during the Izu swarm the changes of the Hurst exponent were strongly related to the level of global geomagnetic activity and not to the increase of the local seismic activity.

Description: Forest fire danger rating in complex topography – results from a case study in the Bavarian Alps in autumn 2011 Natural Hazards and Earth System Science, 13, 2157-2167, 2013 Author(s): C. Schunk, C. Wastl, M. Leuchner, C. Schuster, and A. Menzel Forest fire danger rating based on sparse meteorological stations is known to be potentially misleading when assigned to larger areas of complex topography. This case study examines several fire danger indices based on data from two meteorological stations at different elevations during a major drought period. This drought was caused by a persistent high pressure system, inducing a pronounced temperature inversion and its associated thermal belt with much warmer, dryer conditions in intermediate elevations. Thus, a massive drying of fuels, leading to higher fire danger levels, and multiple fire occurrences at mid-slope positions were contrasted by moderate fire danger especially in the valleys. The ability of fire danger indices to resolve this situation was studied based on a comparison with the actual fire danger as determined from expert observations, fire occurrences and fuel moisture measurements. The results revealed that, during temperature inversion, differences in daily cycles of meteorological parameters influence fire danger and that these are not resolved by standard meteorological stations and fire danger indices (calculated on a once-a-day basis). Additional stations in higher locations or high-resolution meteorological models combined with fire danger indices accepting at least hourly input data may allow reasonable fire danger calculations under these circumstances.

Description: Preface "Landslide hazard and risk assessment at different scales" Natural Hazards and Earth System Science, 13, 2169-2171, 2013 Author(s): P. Reichenbach, A. Günther, and T. Glade

Description: Influence of microphysical schemes on atmospheric water in the Weather Research and Forecasting model Geoscientific Model Development Discussions, 6, 4563-4601, 2013 Author(s): F. Cossu and K. Hocke This study examines how different microphysical parameterization schemes influence orographically-induced precipitation and the distributions of hydrometeors and water vapour for mid-latitude summer conditions in the Weather Research and Forecasting (WRF) model. A high-resolution two-dimensional idealized simulation is used to assess the differences between the schemes in which a moist air flow is interacting with a bell-shaped 2 km high mountain. Periodic lateral boundary conditions are chosen to recirculate atmospheric water in the domain. It is found that the 13 selected microphysical schemes conserve the water in the model domain. The gain or loss of water is less than 0.81% over a simulation time interval of 61 days. The differences of the microphysical schemes in terms of the distributions of water vapour, hydrometeors and accumulated precipitation are presented and discussed. The Kessler scheme, the only scheme without ice-phase processes, shows final values of cloud liquid water 14 times greater than the other schemes. The differences among the other schemes are not as extreme, but still they differ up to 79% in water vapour, up to 10 times in hydrometeors and up to 64% in accumulated precipitation at the end of the simulation. The microphysical schemes also differ in the surface evaporation rate. The WRF single-moment 3-class scheme has the highest surface evaporation rate compensated by the highest precipitation rate. The different distributions of hydrometeors and water vapour of the microphysical schemes induce differences up to 49 W m −2 in the downwelling shortwave radiation and up to 33 W m −2 in the downwelling longwave radiation.

Description: Tidally induced velocity variations of the Beardmore Glacier, Antarctica, and their representation in satellite measurements of ice velocity The Cryosphere, 7, 1375-1384, 2013 Author(s): O. J. Marsh, W. Rack, D. Floricioiu, N. R. Golledge, and W. Lawson Ocean tides close to the grounding line of outlet glaciers around Antarctica have been shown to directly influence ice velocity, both linearly and non-linearly. These fluctuations can be significant and have the potential to affect satellite measurements of ice discharge, which assume displacement between satellite passes to be consistent and representative of annual means. Satellite observations of horizontal velocity variation in the grounding zone are also contaminated by vertical tidal effects, the importance of which is highlighted here in speckle tracking measurements. Eight TerraSAR-X scenes from the grounding zone of the Beardmore Glacier are analysed in conjunction with GPS measurements to determine short-term and decadal trends in ice velocity. Diurnal tides produce horizontal velocity fluctuations of 〉50% on the ice shelf, recorded in the GPS data 4 km downstream of the grounding line. This variability decreases rapidly to 〈5% only 15 km upstream of the grounding line. Daily fluctuations are smoothed to 〈1% in the 11-day repeat pass TerraSAR-X imagery, but fortnightly variations over this period are still visible and show that satellite-velocity measurements can be affected by tides over longer periods. The measured tidal displacement observed in radar look direction over floating ice also allows the grounding line to be identified, using differential speckle tracking where phase information cannot be easily unwrapped.

Description: Linking ICT and society in early warning and adaptation to hydrological extremes in mountains Natural Hazards and Earth System Science, 13, 2253-2270, 2013 Author(s): C. de Jong The assessment of the societal impact of hydrological extremes is particularly important in mountain regions, since mountains can be considered both as the generators and victims of extreme events. ICT can provide a powerful tool for transmitting hydro-meteorological information to predict, prepare and adapt to such events. However, in remote regions, such as mountains, the poles, deserts and islands, preventive and adaptive measures are often restricted by data availability and lack and/or incoherence of data networks. This paper distinguishes between early warning of floods and droughts, emphasising the latter in particular in mountains and explores the possibilities of enhancing the role of society in data collection, the identification, activation and application of stakeholder knowledge and transferral of data from gauged to ungauged catchments.

Description: Snow on the Ross Ice Shelf: comparison of reanalyses and observations from automatic weather stations The Cryosphere, 7, 1399-1410, 2013 Author(s): L. Cohen and S. Dean Snow accumulation measurements from automatic weather stations (AWS) around the Ross Ice Shelf (RIS), Antarctica, are used to provide a new set of ground-based observations which are compared to precipitation from the ECMWF ERA-Interim and NCEP/NCAR Reanalysis-2 datasets. The high temporal resolution of the AWS snow accumulation measurements allow for an event-based comparison of reanalyses precipitation to the in situ observations. Snow accumulation records from nine AWS provide multiple years of accumulation data between 2008 and 2012 over a relatively large, homogeneous region of Antarctica, and also provide the basis for a statistical evaluation of accumulation and precipitation events. The complex effects of wind on snow accumulation (which can both limit and enhance accumulation) complicate the use of the accumulation measurements, but this analysis shows that they can provide a valuable source of ground-based observations for comparisons to modelled precipitation on synoptic timescales. The analysis shows that ERA-Interim reproduces more precipitation events than NCEP-2, and these events correspond to an average 8.2% more precipitation. Significant correlations between reanalyses and AWS event sizes are seen at several stations and show that ERA-Interim consistently produces larger precipitation events than NCEP-2.

Description: The environmental impact of the Puyehue–Cordon Caulle 2011 volcanic eruption on Buenos Aires Natural Hazards and Earth System Science, 13, 2319-2330, 2013 Author(s): G. B. Raga, D. Baumgardner, A. G. Ulke, M. Torres Brizuela, and B. Kucienska On 4 June 2011, the volcanic complex Puyehue–Cordon Caulle located in the Chilean Andes erupted, producing a plume of gases and particles that eventually circled the Southern Hemisphere, disrupting air travel and depositing ash in large quantities. On eight occasions, the plume passed over the city of Buenos Aires, Argentina, leading local authorities to close the two international airports. The eruption occurred during an on-going field campaign when measurements of the properties of atmospheric aerosol particles were being made in Buenos Aires as part of a year-long study of the concentration and optical properties of aerosol at one site in the city. The suite of instruments deployed in Buenos Aires were not tailored to measurements of volcanic ash, but were designed to characterize urban conditions. Nevertheless, these measurements were analysed for periods when vertical profiles of aerosol backscatter, made with a ceilometer, clearly showed the presence of the volcano plume over the research site and resulted in airport closure. Aerosol optical thickness derived from AERONET, MODIS and a ceilometer at our research site, all show enhanced values clearly indicating that the three platforms identified the volcanic plume simultaneously. However, a quantitative comparison of the different estimates proves difficult, suggesting large spatial and temporal variability of the plume. Our results indicate that the number concentration of condensation nuclei (CN), the mass concentration of particle-bound polycyclic aromatic hydrocarbons (PPAH) and the light absorption coefficient exceeded the average background values by more than one standard deviation during the events of volcanic plume. The anomalous concentrations of CN suggest new particle formation, presumably from the conversion of SO 2 , while the anomalous concentrations of PPAH may come from the uptake of PAHs on the plume particles or from chemical reactions on the surface of plume particles. The anomalous absorption coefficients indicate that plume particles may contain certain compounds that can absorb radiation at 550 nm. Another possible explanation consistent with the observations is the scavenging of black carbon from urban sources as the plume descends through the boundary layer to the surface. In addition, the volcanic plume influenced the local meteorology resulting in a decrease of the temperature when compared to the average temperature during days with no plume present.

Description: Contribution of land use changes to future flood damage along the river Meuse in the Walloon region Natural Hazards and Earth System Science, 13, 2301-2318, 2013 Author(s): A. Beckers, B. Dewals, S. Erpicum, S. Dujardin, S. Detrembleur, J. Teller, M. Pirotton, and P. Archambeau Managing flood risk in Europe is a critical issue because climate change is expected to increase flood hazard in many european countries. Beside climate change, land use evolution is also a key factor influencing future flood risk. The core contribution of this paper is a new methodology to model residential land use evolution. Based on two climate scenarios ("dry" and "wet"), the method is applied to study the evolution of flood damage by 2100 along the river Meuse. Nine urbanization scenarios were developed: three of them assume a "current trend" land use evolution, leading to a significant urban sprawl, while six others assume a dense urban development, characterized by a higher density and a higher diversity of urban functions in the urbanized areas. Using damage curves, the damage estimation was performed by combining inundation maps for the present and future 100 yr flood with present and future land use maps and specific prices. According to the dry scenario, the flood discharge is expected not to increase. In this case, land use changes increase flood damages by 1–40%, to €334–462 million in 2100. In the wet scenario, the relative increase in flood damage is 540–630%, corresponding to total damages of €2.1–2.4 billion. In this extreme scenario, the influence of climate on the overall damage is 3–8 times higher than the effect of land use change. However, for seven municipalities along the river Meuse, these two factors have a comparable influence. Consequently, in the "wet" scenario and at the level of the whole Meuse valley in the Walloon region, careful spatial planning would reduce the increase in flood damage by no more than 11–23%; but, at the level of several municipalities, more sustainable spatial planning would reduce future flood damage to a much greater degree.

Description: A general treatment of snow microstructure exemplified by an improved relation for thermal conductivity The Cryosphere, 7, 1473-1480, 2013 Author(s): H. Löwe, F. Riche, and M. Schneebeli Finding relevant microstructural parameters beyond density is a longstanding problem which hinders the formulation of accurate parameterizations of physical properties of snow. Towards a remedy, we address the effective thermal conductivity tensor of snow via anisotropic, second-order bounds. The bound provides an explicit expression for the thermal conductivity and predicts the relevance of a microstructural anisotropy parameter Q , which is given by an integral over the two-point correlation function and unambiguously defined for arbitrary snow structures. For validation we compiled a comprehensive data set of 167 snow samples. The set comprises individual samples of various snow types and entire time series of metamorphism experiments under isothermal and temperature gradient conditions. All samples were digitally reconstructed by micro-computed tomography to perform microstructure-based simulations of heat transport. The incorporation of anisotropy via Q considerably reduces the root mean square error over the usual density-based parameterization. The systematic quantification of anisotropy via the two-point correlation function suggests a generalizable route to incorporate microstructure into snowpack models. We indicate the inter-relation of the conductivity to other properties and outline a potential impact of Q on dielectric constant, permeability and adsorption rate of diffusing species in the pore space.

Description: Influence of high-order mechanics on simulation of glacier response to climate change: insights from Haig Glacier, Canadian Rocky Mountains The Cryosphere, 7, 1527-1541, 2013 Author(s): S. Adhikari and S. J. Marshall Evolution of glaciers in response to climate change has mostly been simulated using simplified dynamical models. Because these models do not account for the influence of high-order physics, corresponding results may exhibit some biases. For Haig Glacier in the Canadian Rocky Mountains, we test this hypothesis by comparing simulation results obtained from 3-D numerical models that deal with different assumptions concerning physics, ranging from simple shear deformation to comprehensive Stokes flow. In glacier retreat scenarios, we find a minimal role of high-order mechanics in glacier evolution, as geometric effects at our site (the presence of an overdeepened bed) result in limited horizontal movement of ice (flow speed on the order of a few meters per year). Consequently, high-order and reduced models all predict that Haig Glacier ceases to exist by ca. 2080 under ongoing climate warming. The influence of high-order mechanics is evident, however, in glacier advance scenarios, where ice speeds are greater and ice dynamical effects become more important. Although similar studies on other glaciers are essential to generalize such findings, we advise that high-order mechanics are important and therefore should be considered while modeling the evolution of active glaciers. Reduced model predictions may be adequate for other glaciologic and topographic settings, particularly where flow speeds are low and where mass balance changes dominate over ice dynamics in determining glacier geometry.

Description: Meteorological drivers of ablation processes on a cold glacier in the semi-arid Andes of Chile The Cryosphere, 7, 1513-1526, 2013 Author(s): S. MacDonell, C. Kinnard, T. Mölg, L. Nicholson, and J. Abermann Meteorological and surface change measurements collected during a 2.5 yr period are used to calculate surface mass and energy balances at 5324 m a.s.l. on Guanaco Glacier, a cold-based glacier in the semi-arid Andes of Chile. Meteorological conditions are marked by extremely low vapour pressures (annual mean of 1.1 hPa), strong winds (annual mean of 10 m s −1 ), shortwave radiation receipt persistently close to the theoretical site maximum during cloud-free days (mean annual 295 W m −2 ; summer hourly maximum 1354 W m −2 ) and low precipitation rates (mean annual 45 mm w.e.). Snowfall occurs sporadically throughout the year and is related to frontal events in the winter and convective storms during the summer months. Net shortwave radiation provides the greatest source of energy to the glacier surface, and net longwave radiation dominates energy losses. The turbulent latent heat flux is always negative, which means that the surface is always losing mass via sublimation, which is the main form of ablation at the site. Sublimation rates are most strongly correlated with net shortwave radiation, incoming shortwave radiation, albedo and vapour pressure. Low glacier surface temperatures restrict melting for much of the period, however episodic melting occurs during the austral summer, when warm, humid, calm and high pressure conditions restrict sublimation and make more energy available for melting. Low accumulation (131 mm w.e. over the period) and relatively high ablation (1435 mm w.e.) means that mass change over the period was negative (−1304 mm w.e.), which continued the negative trend recorded in the region over the last few decades.

Description: Antarctic ice-mass balance 2003 to 2012: regional reanalysis of GRACE satellite gravimetry measurements with improved estimate of glacial-isostatic adjustment based on GPS uplift rates The Cryosphere, 7, 1499-1512, 2013 Author(s): I. Sasgen, H. Konrad, E. R. Ivins, M. R. Van den Broeke, J. L. Bamber, Z. Martinec, and V. Klemann We present regional-scale mass balances for 25 drainage basins of the Antarctic Ice Sheet (AIS) from satellite observations of the Gravity and Climate Experiment (GRACE) for time period January 2003 to September 2012. Satellite gravimetry estimates of the AIS mass balance are strongly influenced by mass movement in the Earth interior caused by ice advance and retreat during the last glacial cycle. Here, we develop an improved glacial-isostatic adjustment (GIA) estimate for Antarctica using newly available GPS uplift rates, allowing us to more accurately separate GIA-induced trends in the GRACE gravity fields from those caused by current imbalances of the AIS. Our revised GIA estimate is considerably lower than previous predictions, yielding an estimate of apparent mass change of 53 ± 18 Gt yr −1 . Therefore, our AIS mass balance of −114 ± 23 Gt yr −1 is less negative than previous GRACE estimates. The northern Antarctic Peninsula and the Amundsen Sea sector exhibit the largest mass loss (−26 ± 3 Gt yr −1 and −127 ± 7 Gt yr −1 , respectively). In contrast, East Antarctica exhibits a slightly positive mass balance (26 ± 13 Gt yr −1 ), which is, however, mostly the consequence of compensating mass anomalies in Dronning Maud and Enderby Land (positive) and Wilkes and George V Land (negative) due to interannual accumulation variations. In total, 6% of the area constitutes about half the AIS imbalance, contributing 151 ± 7 Gt yr −1 (ca. 0.4 mm yr −1 ) to global mean sea-level change. Most of this imbalance is caused by ice-dynamic speed-up expected to prevail in the near future.

Description: Estimating soil suction from electrical resistivity Natural Hazards and Earth System Science, 13, 2369-2379, 2013 Author(s): E. Piegari and R. Di Maio Soil suction and resistivity strongly depend on the degree of soil saturation and, therefore, both are used for estimating water content variations. The main difference between them is that soil suction is measured using tensiometers, which give point information, while resistivity is obtained by tomography surveys, which provide distributions of resistivity values in large volumes, although with less accuracy. In this paper, we have related soil suction to electrical resistivity with the aim of obtaining information about soil suction changes in large volumes, and not only for small areas around soil suction probes. We derived analytical relationships between soil matric suction and electrical resistivity by combining the empirical laws of van Genuchten and Archie. The obtained relationships were used to evaluate maps of soil suction values in different ashy layers originating in the explosive activity of the Mt Somma-Vesuvius volcano (southern Italy). Our findings provided a further example of the high potential of geophysical methods in contributing to more effective monitoring of soil stress conditions; this is of primary importance in areas where rainfall-induced landslides occur periodically.

Description: Sulfur dioxide emissions from Papandayan and Bromo, two Indonesian volcanoes Natural Hazards and Earth System Science, 13, 2399-2407, 2013 Author(s): P. Bani, Surono, M. Hendrasto, H. Gunawan, and S. Primulyana Indonesia hosts 79 active volcanoes, representing 14% of all active volcanoes worldwide. However, little is known about their SO 2 contribution into the atmosphere, due to isolation and access difficulties. Existing SO 2 emission budgets for the Indonesian archipelago are based on extrapolations and inferences as there is a considerable lack of field assessments of degassing. Here, we present the first SO 2 flux measurements using differential optical absorption spectroscopy (DOAS) for Papandayan and Bromo, two of the most active volcanoes in Indonesia. Results indicate mean SO 2 emission rates of 1.4 t d −1 from the fumarolic activity of Papandayan and more than 22–32 t d −1 of SO 2 released by Bromo during a declining eruptive phase. These DOAS results are very encouraging and pave the way for a better evaluation of Indonesian volcanic emissions.

Description: Interviewing insights regarding the fatalities inflicted by the 2011 Great East Japan Earthquake Natural Hazards and Earth System Science, 13, 2173-2187, 2013 Author(s): M. Ando, M. Ishida, Y. Hayashi, C. Mizuki, Y. Nishikawa, and Y. Tu One hundred fifty survivors of the 11 March 2011 Great East Japan Earthquake (Tohoku-oki earthquake) ( M w = 9.0) were interviewed to study the causes of deaths from the associated tsunami in coastal areas of Tohoku. The first official tsunami warning underestimated the height of the tsunami and 40% of the interviewees did not obtain this warning due to immediate blackouts and a lack of communication after the earthquake. Many chose to remain in dangerous locations based on the underestimated warning and their experiences with previous smaller tsunamis and/or due to misunderstanding the mitigating effects of nearby breakwaters in blocking incoming tsunamis. Some delayed their evacuation to perform family safety checks, and in many situations, the people affected misunderstood the risks involved in tsunamis. In this area, three large tsunamis have struck in the 115 yr preceding the 2011 tsunami. These tsunamis remained in the collective memory of communities, and numerous measures against future tsunami damage, such as breakwaters and tsunami evacuation drills, had been implemented. Despite these preparedness efforts, approximately 18 500 deaths and cases of missing persons occurred. The death rate with the age of 65 and above was particularly high, four times higher than that with other age groups. These interviews indicate that deaths resulted from a variety of reasons, but if residents had taken immediate action after the major ground motion stopped, most residents might have been saved. Education about the science behind earthquakes and tsunamis could help save more lives in the future.

Description: AnaWEGE: a weather generator based on analogues of atmospheric circulation Geoscientific Model Development Discussions, 6, 4745-4774, 2013 Author(s): P. Yiou This paper presents a stochastic weather generator based on analogues of circulation (AnaWEGE). Analogues of circulation have been a promising paradigm to analyse climate variability and its extremes. The weather generator uses precomputed analogues of sea-level pressure over the North Atlantic. The stochastic rules of the generator constrain the continuity in time of the simulations. The generator then simulates spatially coherent time series of a climate variable, drawn from meteorological observations. The weather generator is tested for European temperatures, and for winter and summer seasons. The biases in temperature quantiles and autocorrelation are rather small compared to observed variability. The ability of simulating extremely hot summers and cold winters is also assessed.

Description: Methodological aspects of a pattern-scaling approach to produce global fields of monthly means of daily maximum and minimum temperature Geoscientific Model Development Discussions, 6, 4833-4882, 2013 Author(s): S. Kremser, G. E. Bodeker, and J. Lewis A Climate Pattern-Scaling Model (CPSM) that simulates global patterns of climate change, for a prescribed emissions scenario, is described. A CPSM works by quantitatively establishing the statistical relationship between a climate variable at a specific location (e.g. daily maximum surface temperature, T max ) and one or more predictor time series (e.g. global mean surface temperature, T global ) – referred to as the "training" of the CPSM. This training uses a regression model to derive fit-coefficients that describe the statistical relationship between the predictor time series and the target climate variable time series. Once that relationship has been determined, and given the predictor time series for any greenhouse gas (GHG) emissions scenario, the change in the climate variable of interest can be reconstructed – referred to as the "application" of the CPSM. The advantage of using a CPSM rather than a typical atmosphere-ocean global climate model (AOGCM) is that the predictor time series required by the CPSM can usually be generated quickly using a simple climate model (SCM) for any prescribed GHG emissions scenario and then applied to generate global fields of the climate variable of interest. The training can be performed either on historical measurements or on output from an AOGCM. Using model output from 21st century simulations has the advantage that the climate change signal is more pronounced than in historical data and therefore a more robust statistical relationship is obtained. The disadvantage of using AOGCM output is that the CPSM training might be compromised by any AOGCM inadequacies. For the purposes of exploring the various methodological aspects of the CPSM approach, AOGCM output was used in this study to train the CPSM. These investigations of the CPSM methodology focus on monthly mean fields of daily temperature extremes ( T max and T min ). Key conclusions are: (1) overall, the CPSM trained on simulations based on the Representative Concentration Pathway (RCP) 8.5 emissions scenario is able to reproduce AOGCM simulations of T max and T min based on predictor time series from an RCP 4.5 emissions scenario; (2) access to hemisphere average land and ocean temperatures as predictors improves the variance that can be explained, particularly over the oceans; (3) regression model fit-coefficients derived from individual simulations based on the RCP 2.6, 4.5 and 8.5 emissions scenarios agree well over most regions of the globe (the Arctic is the exception); (4) training the CPSM on concatenated time series from an ensemble of simulations does not result in fit-coefficients that explain significantly more of the variance than an approach that weights results based on single simulation fits; and (5) the inclusion of a linear time dependence in the regression model fit-coefficients improves the variance explained, primarily over the oceans.

Description: Modeling different freeze/thaw processes in heterogeneous landscapes of the Arctic polygonal tundra using an ecosystem model Geoscientific Model Development Discussions, 6, 4883-4932, 2013 Author(s): given_name prefix surname suffix, S. Yi, K. Wischnewski, M. Langer, S. Muster, and J. Boike Freeze/thaw (F/T) processes can be quite different under the various land surface types found in the heterogeneous polygonal tundra of the Arctic. Proper simulation of these different processes is essential for accurate prediction of the release of greenhouse gases under a warming climate scenario. In this study we have modified the dynamic organic soil version of the Terrestrial Ecosystem Model (DOS-TEM) to simulate F/T processes beneath the polygon rims, polygon centers (with and without water), and lakes that are common features in Arctic lowland regions. We first verified the F/T algorithm in the DOS-TEM against analytical solutions, and then compared the results with in situ measurements from Samoylov Island, Siberia. In the final stage, we examined the different responses of the F/T processes for different water levels at the various land surface types. The simulations revealed that (1) the DOS-TEM was very efficient and its results compared very well with analytical solutions for idealized cases, (2) the simulations compared reasonably well with in situ measurements although there were a number of model limitations and uncertainties, (3) the DOS-TEM was able to successfully simulate the differences in F/T dynamics under different land surface types, and (4) permafrost beneath water bodies was found to respond highly sensitive to changes in water depths between 1 and 2 m. Our results indicate that water is very important in the thermal processes simulated by the DOS-TEM; the heterogeneous nature of the landscape and different water depths therefore need to be taken into account when simulating methane emission responses to a warming climate.

Description: Review Article: Potential geomorphic consequences of a future great ( M w = 8.0+) Alpine Fault earthquake, South Island, New Zealand Natural Hazards and Earth System Science, 13, 2279-2299, 2013 Author(s): T. R. Robinson and T. R. H. Davies The Alpine Fault in New Zealand's South Island has not sustained a large magnitude earthquake since ca. AD 1717. The time since this rupture is close to the average inferred recurrence interval of the fault (~300 yr). The Alpine Fault is therefore expected to generate a large magnitude earthquake in the near future. Previous ruptures of this fault are inferred to have generated M w = 8.0 or greater earthquakes and to have resulted in, amongst other geomorphic hazards, large-scale landslides and landslide dams throughout the Southern Alps. There is currently 85% probability that the Alpine Fault will cause a M w = 8.0+ earthquake within the next 100 yr. While the seismic hazard is fairly well understood, that of the consequential geomorphic activity is less well studied, and these consequences are explored herein. They are expected to include landsliding, landslide damming, dam-break flooding, debris flows, river aggradation, liquefaction, and landslide-generated lake/fiord tsunami. Using evidence from previous events within New Zealand as well as analogous international examples, we develop first-order estimates of the likely magnitude and possible locations of the geomorphic effects associated with earthquakes. Landsliding is expected to affect an area 〉 30 000 km 2 and involve 〉 1billion m 3 of material. Some tens of landslide dams are expected to occur in narrow, steep-sided gorges in the affected region. Debris flows will be generated in the first long-duration rainfall after the earthquake and will continue to occur for several years as rainfall (re)mobilises landslide material. In total more than 1000 debris flows are likely to be generated at some time after the earthquake. Aggradation of up to 3 m will cover an area 〉 125 km 2 and is likely to occur on many West Coast alluvial fans and floodplains. The impact of these effects will be felt across the entire South Island and is likely to continue for several decades.

Description: Evidence of meltwater retention within the Greenland ice sheet The Cryosphere, 7, 1433-1445, 2013 Author(s): A. K. Rennermalm, L. C. Smith, V. W. Chu, J. E. Box, R. R. Forster, M. R. Van den Broeke, D. Van As, and S. E. Moustafa Greenland ice sheet mass losses have increased in recent decades with more than half of these attributed to surface meltwater runoff. However, the magnitudes of englacial storage, firn retention, internal refreezing and other hydrologic processes that delay or reduce true water export to the global ocean remain less understood, partly due to a scarcity of in situ measurements. Here, ice sheet surface meltwater runoff and proglacial river discharge between 2008 and 2010 near Kangerlussuaq, southwestern Greenland were used to establish sub- and englacial meltwater storage for a small ice sheet watershed (36–64 km 2 ). This watershed lacks significant potential meltwater storage in firn, surface lakes on the ice sheet and in the proglacial area, and receives limited proglacial precipitation. Thus, ice sheet surface runoff not accounted for by river discharge can reasonably be attributed to retention in sub- and englacial storage. Evidence for meltwater storage within the ice sheet includes (1) characteristic dampened daily river discharge amplitudes relative to ice sheet runoff; (2) three cold-season river discharge anomalies at times with limited ice sheet surface melt, demonstrating that meltwater may be retained up to 1–6 months; (3) annual ice sheet watershed runoff is not balanced by river discharge, and while near water budget closure is possible as much as 54% of melting season ice sheet runoff may not escape to downstream rivers; (4) even the large meltwater retention estimate (54%) is equivalent to less than 1% of the ice sheet volume, which suggests that storage in en- and subglacial cavities and till is plausible. While this study is the first to provide evidence for meltwater retention and delayed release within the Greenland ice sheet, more information is needed to establish how widespread this is along the Greenland ice sheet perimeter.

Description: A standard test case suite for two-dimensional linear transport on the sphere: results from a collection of state-of-the-art schemes Geoscientific Model Development Discussions, 6, 4983-5076, 2013 Author(s): P. H. Lauritzen, P. A. Ullrich, C. Jablonowski, P. A. Bosler, D. Calhoun, A. J. Conley, T. Enomoto, L. Dong, S. Dubey, O. Guba, A. B. Hansen, E. Kaas, J. Kent, J.-F. Lamarque, M. J. Prather, D. Reinert, V. V. Shashkin, W. C. Skamarock, B. Sørensen, M. A. Taylor, and M. A. Tolstykh Recently, a standard test case suite for 2-D linear transport on the sphere was proposed to assess important aspects of accuracy in geophysical fluid dynamics with a "minimal" set of idealized model configurations/runs/diagnostics. Here we present results from 19 state-of-the-art transport scheme formulations based on finite-difference/finite-volume methods as well as emerging (in the context of atmospheric/oceanographic sciences) Galerkin methods. Discretization grids range from traditional regular latitude-longitude grids to more isotropic domain discretizations such as icosahedral and cubed-sphere tessellations of the sphere. The schemes are evaluated using a wide range of diagnostics in idealized flow environments. Accuracy is assessed in single- and two-tracer configurations using conventional error norms as well as novel diagnostics designed for climate and climate-chemistry applications. In addition, algorithmic considerations that may be important for computational efficiency are reported on. The latter is inevitably computing platform dependent, The ensemble of results from a wide variety of schemes presented here helps shed light on the ability of the test case suite diagnostics and flow settings to discriminate between algorithms and provide insights into accuracy in the context of global atmospheric/ocean modeling. A library of benchmark results is provided to facilitate scheme intercomparison and model development. Simple software and data-sets are made available to facilitate the process of model evaluation and scheme intercomparison.

Description: High-resolution provenance of desert dust deposited on Mt. Elbrus, Caucasus in 2009–2012 using snow pit and firn core records The Cryosphere, 7, 1481-1498, 2013 Author(s): S. Kutuzov, M. Shahgedanova, V. Mikhalenko, P. Ginot, I. Lavrentiev, and S. Kemp The first record of dust deposition events on Mt. Elbrus, Caucasus Mountains derived from a snow pit and a shallow firn core is presented for the 2009–2012 period. A combination of isotopic analysis, SEVIRI red-green-blue composite imagery, MODIS atmospheric optical depth fields derived using the Deep Blue algorithm, air mass trajectories derived using the HYSPLIT model and analyses of meteorological data enabled identification of dust source regions with high temporal (hours) and spatial (ca. 20–100 km) resolution. Seventeen dust deposition events were detected; fourteen occurred in March–June, one in February and two in October. Four events originated in the Sahara, predominantly in northeastern Libya and eastern Algeria. Thirteen events originated in the Middle East, in the Syrian Desert and northern Mesopotamia, from a mixture of natural and anthropogenic sources. Dust transportation from Sahara was associated with vigorous Saharan depressions, strong surface winds in the source region and mid-tropospheric southwesterly flow with daily winds speeds of 20–30 m s −1 at 700 hPa level. Although these events were less frequent than those originating in the Middle East, they resulted in higher dust concentrations in snow. Dust transportation from the Middle East was associated with weaker depressions forming over the source region, high pressure centred over or extending towards the Caspian Sea and a weaker southerly or southeasterly flow towards the Caucasus Mountains with daily wind speeds of 12–18 m s −1 at 700 hPa level. Higher concentrations of nitrates and ammonium characterised dust from the Middle East deposited on Mt. Elbrus in 2009 indicating contribution of anthropogenic sources. The modal values of particle size distributions ranged between 1.98 μm and 4.16 μm. Most samples were characterised by modal values of 2.0–2.8 μm with an average of 2.6 μm and there was no significant difference between dust from the Sahara and the Middle East.

Description: Changes in glacier equilibrium-line altitude in the western Alps from 1984 to 2010: evaluation by remote sensing and modeling of the morpho-topographic and climate controls The Cryosphere, 7, 1455-1471, 2013 Author(s): A. Rabatel, A. Letréguilly, J.-P. Dedieu, and N. Eckert We present time series of equilibrium-line altitude (ELA) measured from the end-of-summer snow line altitude computed using satellite images, for 43 glaciers in the western Alps over the 1984–2010 period. More than 120 satellite images acquired by Landsat, SPOT and ASTER were used. In parallel, changes in climate variables, summer cumulative positive degree days (CPDD) and winter precipitation, were analyzed over the same time period using 22 weather stations located inside and around the study area. Assuming a continuous linear trend over the study period: (1) the average ELA of the 43 glaciers increased by about 170 m; (2) summer CPDD increased by about 150 PDD at 3000 m a.s.l.; and (3) winter precipitation remained rather stationary. Summer CPDD showed homogeneous spatial and temporal variability; winter precipitation showed homogeneous temporal variability, but some stations showed a slightly different spatial pattern. Regarding ELAs, temporal variability between the 43 glaciers was also homogeneous, but spatially, glaciers in the southern part of the study area differed from glaciers in the northern part, mainly due to a different precipitation pattern. A sensitivity analysis of the ELAs to climate and morpho-topographic variables (elevation, aspect, latitude) highlighted the following: (1) the average ELA over the study period of each glacier is strongly controlled by morpho-topographic variables; and (2) the interannual variability of the ELA is strongly controlled by climate variables, with the observed increasing trend mainly driven by increasing temperatures, even if significant nonlinear, low-frequency fluctuations appear to be driven by winter precipitation anomalies. Finally, we used an expansion of Lliboutry's approach to reconstruct fluctuations in the ELA of any glacier of the study area with respect to morpho-topographic and climate variables, by quantifying their respective weight and the related uncertainties in a consistent manner within a hierarchical Bayesian framework. This method was tested and validated using the ELA measured on the satellite images.

Description: On the analytic approximation of bulk collision rates of non-spherical hydrometeors Geoscientific Model Development Discussions, 6, 5077-5116, 2013 Author(s): A. Seifert, U. Blahak, and R. Buhr Analytic approximations of the binary collision rates of hydrometeors are derived for use in bulk microphysical parameterizations. Special attention is given to non-spherical hydrometeors like raindrops and snowflakes. The terminal fall velocity of these particles cannot be sufficiently well approximated by power law relations which are used in most microphysical parameterizations and therefore an improved formulation is needed. The analytic approximations of the bulk collision rates given in this paper are an alternative to look-up tables and can replace the Wisner approximation which is used in many atmospheric models.

Description: Integrating spatial, temporal, and size probabilities for the annual landslide hazard maps in the Shihmen watershed, Taiwan Natural Hazards and Earth System Science, 13, 2353-2367, 2013 Author(s): C. Y. Wu and S. C. Chen Landslide spatial, temporal, and size probabilities were used to perform a landslide hazard assessment in this study. Eleven intrinsic geomorphological, and two extrinsic rainfall factors were evaluated as landslide susceptibility related factors as they related to the success rate curves, landslide ratio plots, frequency distributions of landslide and non-landslide groups, as well as probability–probability plots. Data on landslides caused by Typhoon Aere in the Shihmen watershed were selected to train the susceptibility model. The landslide area probability, based on the power law relationship between the landslide area and a noncumulative number, was analyzed using the Pearson type 5 probability density function. The exceedance probabilities of rainfall with various recurrence intervals, including 2, 5, 10, 20, 50, 100 and 200 yr, were used to determine the temporal probabilities of the events. The study was conducted in the Shihmen watershed, which has an area of 760 km 2 and is one of the main water sources for northern Taiwan. The validation result of Typhoon Krosa demonstrated that this landslide hazard model could be used to predict the landslide probabilities. The results suggested that integration of spatial, area, and exceedance probabilities to estimate the annual probability of each slope unit is feasible. The advantage of this annual landslide probability model lies in its ability to estimate the annual landslide risk, instead of a scenario-based risk.

Description: On the puzzling feature of the silence of precursory electromagnetic emissions Natural Hazards and Earth System Science, 13, 2381-2397, 2013 Author(s): K. Eftaxias, S. M. Potirakis, and T. Chelidze It has been suggested that fracture-induced MHz–kHz electromagnetic emissions (EME), which emerge from a few days up to a few hours before the main seismic shock occurrence permit a real-time monitoring of the damage process during the last stages of earthquake preparation, as it happens at the laboratory scale. Despite fairly abundant evidence, electromagnetic (EM) precursors have not been adequately accepted as credible physical phenomena. These negative views are enhanced by the fact that certain "puzzling features" are repetitively observed in candidate fracture-induced pre-seismic EME. More precisely, EM silence in all frequency bands appears before the main seismic shock occurrence, as well as during the aftershock period. Actually, the view that "acceptance of "precursive" EM signals without convincing co-seismic signals should not be expected" seems to be reasonable. In this work we focus on this point. We examine whether the aforementioned features of EM silence are really puzzling ones or, instead, reflect well-documented characteristic features of the fracture process, in terms of universal structural patterns of the fracture process, recent laboratory experiments, numerical and theoretical studies of fracture dynamics, critical phenomena, percolation theory, and micromechanics of granular materials. Our analysis shows that these features should not be considered puzzling.

Description: A note on the water budget of temperate glaciers The Cryosphere, 7, 1557-1564, 2013 Author(s): J. Oerlemans In this note, the total dissipative melting in temperate glaciers is studied. The analysis is based on the notion that the dissipation is determined by the loss of potential energy due to the downward motion of mass (ice, snow, meltwater and rain). A mathematical formulation of the dissipation is developed and applied to a simple glacier geometry. In the next step, meltwater production resulting from enhanced ice motion during a glacier surge is calculated. The amount of melt energy available follows directly from the lowering of the centre of gravity of the glacier. To illustrate the concept, schematic calculations are presented for a number of glaciers with different geometric characteristics. Typical dissipative melt rates, expressed as water-layer depth averaged over the glacier, range from a few centimetres per year for smaller glaciers to half a metre per year for Franz Josef Glacier, one of the most active glaciers in the world (in terms of mass turnover). The total generation of meltwater during a surge is typically half a metre. For Variegated Glacier a value of 70 cm is found, for Kongsvegen 20 cm. These values refer to water layer depth averaged over the entire glacier. The melt \textit{rate} depends on the duration of the surge. It is generally an order of magnitude greater than water production by `normal' dissipation. On the other hand, the additional basal melt rate during a surge is comparable in magnitude with the water input from meltwater and precipitation. This suggests that enhanced melting during a surge does not grossly change the total water budget of a glacier. Basal water generated by enhanced sliding is an important ingredient in many theories of glacier surges. It provides a positive feedback mechanism that actually makes the surge happen. The results found here suggest that this can only work if water generated by enhanced sliding accumulates in a part of the glacier base where surface meltwater and rain have no or very limited access. This finding seems compatible with the fact that, on many glaciers, surges are initiated in the lower accumulation zone.

Description: Ensemble initialization of the oceanic component of a coupled model through bred vectors at seasonal-to-interannual time scales Geoscientific Model Development Discussions, 6, 5189-5214, 2013 Author(s): J. Baehr and R. Piontek We evaluate the ensemble spread at seasonal-to-interannual time scales for two perturbation techniques implemented into the ocean component of a coupled model: (1) lagged initial conditions as commonly used for decadal predictions, (2) bred vectors as commonly used for weather and seasonal forecasting. We show that relative to an uninitialized reference simulation the implementation for bred vectors can improve the ensemble spread compared to lagged initialization at time scales from one months up to three years. As bred vectors have so far mostly been used at short time scales, we initially focus on the implementation of the bred vectors into the ocean component. We introduce a depth-dependent vertical rescaling norm, accounting for the vertical dependence of the variability, and extending the commonly used upper-ocean rescaling norm to the full water column. We further show that it is sufficient for the (sub-surface) ocean to breed temperature and salinity (i.e., scalar quantities), and rely on the governing physics to carry the temperature and salinity perturbations to the flow field. Using these bred vectors with a rescaling interval of 12 months, we initialize hindcast simulations and compare them to hindcast simulations initialized with lagged initial conditions. We quantify the ensemble spread by analyzing Talagrand diagrams and spread-error ratios. For both temperature and salinity, the lagged initialized ensemble is particularly under-dispersive for the first few months of predictable lead time. The ensemble initialized with bred vectors improves the spread for temperature and salinity for the 0–700 m and 1000–3500 m means, compared to the lagged ensemble at lead times of several months to one year. As the lead time increases to years, the differences between the two ensemble initialization techniques becomes more difficult to discern. While the results need to be confirmed in an initialized framework, the present analysis represents a first step towards an improved ensemble generation at the transition from seasonal-to-interannual time scales, in particular at lead times up to one year.

Description: Understanding the performance of the FLake model over the African Great Lakes Geoscientific Model Development Discussions, 6, 5141-5187, 2013 Author(s): W. Thiery, A. Martynov, F. Darchambeau, J.-P. Descy, P.-D. Plisnier, L. Sushama, and N. P. M. van Lipzig The ability of the one-dimensional lake model FLake to represent the mixolimnion temperatures for tropical conditions was tested for three locations in East Africa: Lake Kivu, Lake Tanganyika's northern and southern basins. Meteorological observations from surrounding Automatic Weather Stations were corrected and used to drive FLake, whereas a comprehensive set of water temperature profiles served to evaluate the model at each site. Careful forcing data correction and model configuration allowed to reproduce the observed mixed layer seasonality at Lake Kivu and Lake Tanganyika (northern and southern basins), with correct representation of both the mixed layer depth and temperature structure. At Lake Kivu, mixolimnion temperatures predicted by FLake were found sensitive both to minimal variations in the external parameters (lake depth and water transparency) as to small changes in the meteorological driving data, in particular wind velocity. In each case, small modifications may already lead to a regime switch from the correctly represented seasonal mixed layer deepening to either completely mixed (down to the model lake bottom) or permanently stratified (from ~10 m downwards) conditions. In contrast, model temperatures are found robust close to the surface, with acceptable predictions of near-surface water temperatures even when the seasonal mixing regime is not reproduced. FLake can thus be a suitable tool to parameterize tropical lake water surface temperatures within atmospheric prediction models, but may be less appropriate, in its current form, to study complex limnological processes within tropical lakes. Furthermore, a study of different initial conditions showed that for tropical lakes lacking reliable initial data, a fully mixed, artificially warm initialisation is to be preferred, but only if the model is allowed to spin up until convergence is reached. Finally, FLake was used to attribute the seasonal mixing cycle at Lake Kivu to variations in the near-surface meteorological conditions. It was found that the annual mixing down to 60 m during the main dry season is primarily due to enhanced lake evaporation and secondarily due to the decreased incoming long wave radiation, both causing a significant heat loss from the lake surface and associated mixolimnion cooling.

Description: Global glacier changes: a revised assessment of committed mass losses and sampling uncertainties The Cryosphere, 7, 1565-1577, 2013 Author(s): S. H. Mernild, W. H. Lipscomb, D. B. Bahr, V. Radić, and M. Zemp Most glaciers and ice caps (GIC) are out of balance with the current climate. To return to equilibrium, GIC must thin and retreat, losing additional mass and raising sea level. Because glacier observations are sparse and geographically biased, there is an undersampling problem common to all global assessments. Here, we further develop an assessment approach based on accumulation-area ratios (AAR) to estimate committed mass losses and analyze the undersampling problem. We compiled all available AAR observations for 144 GIC from 1971 to 2010, and found that most glaciers and ice caps are farther from balance than previously believed. Accounting for regional and global undersampling errors, our model suggests that GIC are committed to additional losses of 32 ± 12% of their area and 38 ± 16% of their volume if the future climate resembles the climate of the past decade. These losses imply global mean sea-level rise of 163 ± 69 mm, assuming total glacier volume of 430 mm sea-level equivalent. To reduce the large uncertainties in these projections, more long-term glacier measurements are needed in poorly sampled regions.

Description: Early warning of snow-caused disasters in pastoral areas on the Tibetan Plateau Natural Hazards and Earth System Science, 13, 1411-1425, 2013 Author(s): W. Wang, T. Liang, X. Huang, Q. Feng, H. Xie, X. Liu, M. Chen, and X. Wang This study develops a model for early warning of snow-caused livestock disasters on a county basis and proposes a method of qualitative risk assessment of snow disasters at 500 m resolution for pastoral areas on the Tibetan Plateau (TP). Data used for the model development include remote sensing data, statistical data of weather, livestock, and social economy, and 45 typical snow disaster cases from 2000 to 2010. The principal component analysis (PCA) approach is used to choose 7 crucial factors that contribute over 85% of information for early warning snow disasters on the TP. They are mean annual probability of snow disaster, number of snow-covered days, livestock stocking rate, continual days of mean daily temperature below −10 °C, grassland burial index, rate of snow-covered grassland, and per livestock gross domestic product. The chosen 411 cases from 2008 to 2010 are used to validate the prediction results from the developed early warning model, with an overall accuracy of 85.64% in predicting snow disasters and no disasters. This suggests that the early warning approach developed in the study has operational potential for predicting snow disasters on the TP.

Description: How much does participatory flood management contribute to stakeholders' social capacity building? Empirical findings based on a triangulation of three evaluation approaches Natural Hazards and Earth System Science, 13, 1427-1444, 2013 Author(s): M. Buchecker, S. Menzel, and R. Home Recent literature suggests that dialogic forms of risk communication are more effective to build stakeholders' hazard-related social capacities. In spite of the high theoretical expectations, there is a lack of univocal empirical evidence on the relevance of these effects. This is mainly due to the methodological limitations of the existing evaluation approaches. In our paper we aim at eliciting the contribution of participatory river revitalisation projects on stakeholders' social capacity building by triangulating the findings of three evaluation studies that were based on different approaches: a field-experimental, a qualitative long-term ex-post and a cross-sectional household survey approach. The results revealed that social learning and avoiding the loss of trust were more relevant benefits of participatory flood management than acceptance building. The results suggest that stakeholder involvements should be more explicitly designed as tools for long-term social learning.

Description: Stakeholders' issues for action during the warning process and the interpretation of forecasts' uncertainties Natural Hazards and Earth System Science, 13, 1469-1479, 2013 Author(s): L. Créton-Cazanave and C. Lutoff This article considers the socio-geographical approach carried out as part of the MedUp program. It presents a study of the ways that the French "actors" manage forecast uncertainties during a flash flood warning process. In order to better understand the role of forecasts' uncertainties in decision making, we focused on the actions people took and how what they say explains their actions. The practices of actors involved in warnings for the Vidourle watershed (Gard, France), in particular, are analyzed using a practice-based approach. A set of categories of the "actors" was developed based on their descriptions of the problems they faced during the flash flood warning, independent of their socio-professional status and position in the warning chain. Five actor profiles result from this: Translators, Managers, Committed, Navigators and Vulnerable. For each profile, specific action contexts are defined, determining how each deals with uncertainty.

Description: Augmenting Austrian flood management practices through geospatial predictive analytics: a study in Carinthia Natural Hazards and Earth System Science, 13, 1445-1455, 2013 Author(s): S. M. Ward and G. Paulus The Danube River basin has long been the location of significant flooding problems across central Europe. The last decade has seen a sharp increase in the frequency, duration and intensity of these flood events, unveiling a dire need for enhanced flood management policy and tools in the region. Located in the southern portion of Austria, the state of Carinthia has experienced a significant volume of intense flood impacts over the last decade. Although the Austrian government has acknowledged these issues, their remedial actions have been primarily structural to date. Continued focus on controlling the natural environment through infrastructure while disregarding the need to consider alternative forms of assessing flood exposure will only act as a provisional solution to this inescapable risk. In an attempt to remedy this flaw, this paper highlights the application of geospatial predictive analytics and spatial recovery index as a proxy for community resilience, as well as the cultural challenges associated with the application of foreign models within an Austrian environment.

Description: Recent changes in spring snowmelt timing in the Yukon River basin detected by passive microwave satellite data The Cryosphere, 7, 905-916, 2013 Author(s): K. A. Semmens and J. M. Ramage Spring melt is a significant feature of high latitude snowmelt dominated drainage basins influencing hydrological and ecological processes such as snowmelt runoff and green-up. Melt duration, defined as the transition period from snowmelt onset until the end of the melt refreeze, is characterized by high diurnal amplitude variations (DAV) where the snowpack is melting during the day and refreezing at night, after which the snowpack melts constantly until depletion. Determining trends for this critical period is necessary for understanding how the Arctic is changing with rising temperatures and provides a baseline from which to assess future change. To study this dynamic period, brightness temperature ( T b ) data from the Special Sensor Microwave Imager (SSM/I) 37 V-GHz frequency from 1988 to 2010 were used to assess snowmelt timing trends for the Yukon River basin, Alaska/Canada. Annual T b and DAV for 1434 Equal-Area Scalable Earth (EASE)-Grid pixels (25 km resolution) were processed to determine melt onset and melt refreeze dates from T b and DAV thresholds previously established in the region. Temporal and spatial trends in the timing of melt onset and melt refreeze, and the duration of melt were analyzed for the 13 sub-basins of the Yukon River basin with three different time interval approaches. Results show a lengthening of the melt period for the majority of the sub-basins with a significant trend toward later end of melt refreeze after which the snowpack melts day and night leading to snow clearance, peak discharge, and green-up. Earlier melt onset trends were also found in the higher elevations and northernmost sub-basins (Porcupine, Chandalar, and Koyukuk rivers). Latitude and elevation displayed the dominant controls on melt timing variability and spring solar flux was highly correlated with melt timing in middle (∼600–1600 m) elevations.

Description: Seasonal controls on snow distribution and aerial ablation at the snow-patch and landscape scales, McMurdo Dry Valleys, Antarctica The Cryosphere, 7, 917-931, 2013 Author(s): J. W. Eveland, M. N. Gooseff, D. J. Lampkin, J. E. Barrett, and C. D. Takacs-Vesbach Accumulated snow in the McMurdo Dry Valleys, while limited, has great ecological significance to subnivian soil environments. Though sublimation dominates the ablation process in this region, measurable increases in soil moisture and insulation from temperature extremes provide more favorable conditions with respect to subnivian soil communities. While precipitation is not substantial, significant amounts of snow can accumulate, via wind transport, in topographic lees along the valley bottoms, forming thousands of discontinuous snow patches. These patches have the potential to act as significant sources of local meltwater, controlling biogeochemical cycling and the landscape distribution of microbial communities. Therefore, determining the spatial and temporal dynamics of snow at multiple scales is imperative to understanding the broader ecological role of snow in this region. High-resolution satellite imagery acquired during the 2009–2010 and 2010–2011 austral summers was used to quantify the distribution of snow across Taylor and Wright valleys. Extracted snow-covered area from the imagery was used as the basis for assessing inter-annual variability and seasonal controls on accumulation and ablation of snow at multiple scales. In addition to landscape analyses, fifteen 1 km 2 plots (3 in each of 5 study regions) were selected to assess the prevalence of snow cover at finer spatial scales, referred to herein as the snow-patch scale. Results confirm that snow patches tend to form in the same locations each year with some minor deviations observed. At the snow-patch scale, neighboring patches often exhibit considerable differences in aerial ablation rates, and particular snow patches do not reflect trends for snow-covered area observed at the landscape scale. These differences are presumably related to microtopographic influences acting on individual snow patches, such as wind sheltering and differences in snow depth due to the underlying topography. This highlights the importance of both the landscape and snow-patch scales in assessing the effects of snow cover on biogeochemical cycling and microbial communities.

Description: CDRD and PNPR satellite passive microwave precipitation retrieval algorithms: EuroTRMM/EURAINSAT origins and H-SAF operations Natural Hazards and Earth System Science, 13, 887-912, 2013 Author(s): A. Mugnai, E. A. Smith, G. J. Tripoli, B. Bizzarri, D. Casella, S. Dietrich, F. Di Paola, G. Panegrossi, and P. Sanò Satellite Application Facility on Support to Operational Hydrology and Water Management (H-SAF) is a EUMETSAT (European Organisation for the Exploitation of Meteorological Satellites) program, designed to deliver satellite products of hydrological interest (precipitation, soil moisture and snow parameters) over the European and Mediterranean region to research and operations users worldwide. Six satellite precipitation algorithms and concomitant precipitation products are the responsibility of various agencies in Italy. Two of these algorithms have been designed for maximum accuracy by restricting their inputs to measurements from conical and cross-track scanning passive microwave (PMW) radiometers mounted on various low Earth orbiting satellites. They have been developed at the Italian National Research Council/Institute of Atmospheric Sciences and Climate in Rome (CNR/ISAC-Rome), and are providing operational retrievals of surface rain rate and its phase properties. Each of these algorithms is physically based, however, the first of these, referred to as the Cloud Dynamics and Radiation Database (CDRD) algorithm, uses a Bayesian-based solution solver, while the second, referred to as the PMW Neural-net Precipitation Retrieval (PNPR) algorithm, uses a neural network-based solution solver. Herein we first provide an overview of the two initial EU research and applications programs that motivated their initial development, EuroTRMM and EURAINSAT (European Satellite Rainfall Analysis and Monitoring at the Geostationary Scale), and the current H-SAF program that provides the framework for their operational use and continued development. We stress the relevance of the CDRD and PNPR algorithms and their precipitation products in helping secure the goals of H-SAF's scientific and operations agenda, the former helpful as a secondary calibration reference to other algorithms in H-SAF's complete mix of algorithms. Descriptions of the algorithms' designs are provided including a few examples of their performance. This aspect of the development of the two algorithms is placed in the context of what we refer to as the TRMM era, which is the era denoting the active and ongoing period of the Tropical Rainfall Measuring Mission (TRMM) that helped inspire their original development. In 2015, the ISAC-Rome precipitation algorithms will undergo a transformation beginning with the upcoming Global Precipitation Measurement (GPM) mission, particularly the GPM Core Satellite technologies. A few years afterward, the first pair of imaging and sounding Meteosat Third Generation (MTG) satellites will be launched, providing additional technological advances. Various of the opportunities presented by the GPM Core and MTG satellites for improving the current CDRD and PNPR precipitation retrieval algorithms, as well as extending their product capability, are discussed.

Description: Ice-shelf buttressing and the stability of marine ice sheets The Cryosphere, 7, 647-655, 2013 Author(s): G. H. Gudmundsson Ice-shelf buttressing and the stability of marine-type ice sheets are investigated numerically. Buttressing effects are analysed for a situation where a stable grounding line is located on a bed sloping upwards in the direction of flow. Such grounding-line positions are known to be unconditionally unstable in the absence of transverse flow variations. It is shown that ice-shelf buttressing can restore stability under these conditions. Ice flux at the grounding line is, in general, not a monotonically increasing function of ice thickness. This, possibly at first somewhat counterintuitive result, is found to be fully consistent with recent theoretical work. Grounding lines on retrograde slopes are conditionally stable, and the stability regime is a non-trivial function of bed and ice-shelf geometry. The stability of grounding lines cannot be assessed from considerations of local bed slope only.

Description: Evidence and analysis of 2012 Greenland records from spaceborne observations, a regional climate model and reanalysis data The Cryosphere, 7, 615-630, 2013 Author(s): M. Tedesco, X. Fettweis, T. Mote, J. Wahr, P. Alexander, J. E. Box, and B. Wouters A combined analysis of remote sensing observations, regional climate model (RCM) outputs and reanalysis data over the Greenland ice sheet provides evidence that multiple records were set during summer 2012. Melt extent was the largest in the satellite era (extending up to ∼97% of the ice sheet) and melting lasted up to ∼2 months longer than the 1979–2011 mean. Model results indicate that near surface temperature was ∼3 standard deviations (σ) above the 1958–2011 mean, while surface mass balance (SMB) was ∼3σ below the mean and runoff was 3.9σ above the mean over the same period. Albedo, exposure of bare ice and surface mass balance also set new records, as did the total mass balance with summer and annual mass changes of, respectively, −627 Gt and −574 Gt, 2σ below the 2003–2012 mean. We identify persistent anticyclonic conditions over Greenland associated with anomalies in the North Atlantic Oscillation (NAO), changes in surface conditions (e.g., albedo, surface temperature) and preconditioning of surface properties from recent extreme melting as major driving mechanisms for the 2012 records. Less positive if not increasingly negative SMB will likely occur should these characteristics persist.

Description: Balanced conditions or slight mass gain of glaciers in the Lahaul and Spiti region (northern India, Himalaya) during the nineties preceded recent mass loss The Cryosphere, 7, 569-582, 2013 Author(s): C. Vincent, Al. Ramanathan, P. Wagnon, D. P. Dobhal, A. Linda, E. Berthier, P. Sharma, Y. Arnaud, M. F. Azam, P. G. Jose, and J. Gardelle The volume change of the Chhota Shigri Glacier (India, 32° 20 N, 77° 30' E) between 1988 and 2010 has been determined using in situ geodetic measurements. This glacier has experienced only a slight mass loss between 1988 and 2010 (−3.8 ± 2.0 m w.e. (water equivalent) corresponding to −0.17 ± 0.09 m w.e. yr −1 ). Using satellite digital elevation models (DEM) differencing and field measurements, we measure a negative mass balance (MB) between 1999 and 2010 (−4.8 ± 1.8 m w.e. corresponding to −0.44 ± 0.16 m w.e. yr −1 ). Thus, we deduce a slightly positive or near-zero MB between 1988 and 1999 (+1.0 ± 2.7 m w.e. corresponding to +0.09 ± 0.24 m w.e. yr −1 ). Furthermore, satellite DEM differencing reveals that the MB of the Chhota Shigri Glacier (−0.39 ± 0.15 m w.e. yr −1 ) has been only slightly less negative than the MB of a 2110 km 2 glaciarized area in the Lahaul and Spiti region (−0.44 ± 0.09 m w.e. yr −1 ) during 1999−2011. Hence, we conclude that the ice wastage is probably moderate in this region over the last 22 yr, with near equilibrium conditions during the nineties, and an ice mass loss after. The turning point from balanced to negative mass budget is not known but lies probably in the late nineties and at the latest in 1999. This positive or near-zero MB for Chhota Shigri Glacier (and probably for the surrounding glaciers of the Lahaul and Spiti region) during at least part of the 1990s contrasts with a recent compilation of MB data in the Himalayan range that indicated ice wastage since 1975. However, in agreement with this compilation, we confirm more negative balances since the beginning of the 21st century.

Description: The mid-Pliocene climate simulated by FGOALS-g2 Geoscientific Model Development Discussions, 6, 2403-2428, 2013 Author(s): W. Zheng, Z. Zhang, L. Chen, and Y. Yu Within the framework of Pliocene Model Intercomparison Project (PlioMIP), the mid-Pliocene (3.264–3.025 Ma) climate simulated by the Flexible Global Ocean-Atmosphere-Land System model grid-point version 2 (FGOALS-g2) are analyzed in this study. Results show that the model reproduces the large-scale features of the global warming over the land and ocean. The simulated mid-Pliocene global annual mean surface air temperature (TAS) and sea surface temperature (SST) are 4.17 and 2.62°C warmer than the pre-Industrial simulation, respectively. In particular, the feature of larger warming over mid-high latitudes is well captured. In the simulated warm mid-Pliocene climate, the Atlantic Meridional Overturning Circulation (AMOC) and El Niño-Southern Oscillation (ENSO) become weaker.

Description: The potential of an observational data set for calibration of a computationally expensive computer model Geoscientific Model Development Discussions, 6, 2369-2401, 2013 Author(s): D. J. McNeall, P. G. Challenor, J. R. Gattiker, and E. J. Stone We measure the potential of an observational data set to constrain a set of inputs to a complex and computationally expensive computer model. We use each member in turn of an ensemble of output from a computationally expensive model, corresponding to some observable part of a modelled system, as a proxy for an observational data set. We argue that our ability to constrain uncertain parameter inputs to a model using its own output as data, provides a maximum bound for our ability to constrain the model inputs using observations of the real system. The ensemble provides a set of known parameter input and model output pairs, which we use to build a computationally efficient statistical proxy for the full computer model, termed an emulator. We use the emulator to find and rule out ''implausible" values for the inputs of held-out ensemble members, given the computer model output. As we know the true values of the inputs for the ensemble, we can compare our constraint of the model inputs with the true value of the input for any ensemble member. Measures of the quality of constraint have the potential to inform strategy for data collection campaigns, before any real-world data is collected, as well as acting as an effective sensitivity analysis. We use an ensemble of the ice sheet model Glimmer to demonstrate our measures of quality of constraint. The ensemble has 250 model runs with 5 uncertain input parameters, and an output variable representing the pattern of the thickness of ice over Greenland. We have an observation of historical ice sheet thickness that directly matches the output variable, and offers an opportunity to constrain the model. We show that different ways of summarising our output variable (ice volume, ice surface area and maximum ice thickness) offer different potential constraints on individual input parameters. We show that combining the observational data gives increased power to constrain the model. We investigate the impact of uncertainty in observations or in model biases on our measures, showing that even a modest uncertainty can seriously degrade the potential of the observational data to constrain the model.

Description: The geomorphological effect of cornice fall avalanches in the Longyeardalen valley, Svalbard The Cryosphere, 7, 1361-1374, 2013 Author(s): M. Eckerstorfer, H. H. Christiansen, L. Rubensdotter, and S. Vogel The study of snow avalanches and their geomorphological effect in the periglacial parts of the cryosphere is important for enhanced geomorphological process understanding as well as hazard-related studies. Only a few field studies, and particularly few in the High Arctic, have quantified avalanche sedimentation. Snow avalanches are traditionally ranked behind rockfall in terms of their significance for mass-wasting processes of rockslopes. Cornice fall avalanches are at present the most dominant snow avalanche type at two slope systems, called Nybyen and Larsbreen, in the valley Longyeardalen in central Svalbard. Both slope systems are on northwest-facing lee slopes underneath a large summit plateau, with annual cornices forming on the top. High-frequency and magnitude cornice fall avalanching is observed by daily automatic time-lapse photography. In addition, rock debris sedimentation by cornice fall avalanches was measured directly in permanent sediment traps or by snow inventories. The results from a maximum of seven years of measurements in a total of 13 catchments show maximum mean rock debris sedimentation rates ranging from 8.2 to 38.7 kg m −2 at Nybyen, and from 0.8 to 55.4 kg m −2 at Larsbreen. Correspondingly, avalanche fan surfaces accreted from 2.6 to 8.8 mm yr −1 at Nybyen, and from 0.2 to 13.9 mm yr −1 at Larsbreen. This comparably efficient rockslope mass wasting is due to collapsing cornices producing cornice fall avalanches containing large amounts of rock debris throughout the entire winter. The rock debris of different origin stems from the plateau crests, the adjacent free rock face and the transport pathway, accumulating distinct avalanche fans at both slope systems. Cornice fall avalanche sedimentation also contributed to the development of a rock glacier at the Larsbreen site during the Holocene. We have recorded present maximum rockwall retreat rates of 0.9 mm yr −1 at Nybyen, but as much as 6.7 mm yr −1 at Larsbreen, while average Holocene rockwall retreat rates of 1.1 mm yr −1 at Nybyen have been determined earlier. As cornice fall avalanches are the dominant type of avalanche in central Svalbard, the related geomorphological effect is assumed to be of significance at periglacial landscape scale. A climate-induced shift in prevailing winter wind direction could change the rockslope sedimentation effectively by changing the snow avalanche activity.

Description: On searching for optimized set of physical parameterization schemes in a multi-physics land surface process model Geoscientific Model Development Discussions, 6, 4511-4530, 2013 Author(s): S. Hong, X. Yu, S. K. Park, Y.-S. Choi, and B. Myoung Optimization of land surface models has been very challenging due to the increasing complexity of such models. Typical parameter calibration techniques often limit the solution of the spatiotemporal discrepancy in the modeling performance levels especially for regional applications. Thus, in this study, an attempt was made to perform scheme-based model optimization by designing a framework for coupling a micro-genetic algorithm (micro-GA) with the Noah land surface model that has multiple physics options (Noah-MP). Micro-GA controls the scheme selections in 10 different land surface parameterization fields in Noah-MP in order to extract the optimal scheme combination for a certain region. This coupling framework was successfully applied to the optimization of the surface water partitioning in the Korean Peninsula, promising not only the effectiveness of the scheme-based optimization but also model diagnosis capability by exploring the scheme sensitivity during the micro-GA evolution process. Then, the method was applied to four different regions in East Asia that have different climatic characteristics. The results indicate that (1) the optimal scheme combinations vary with the regions, (2) schemes related to the surface water partitioning are important for the modeling accuracy, and (3) specialized post-parameter optimization for each region may be required.

Description: Atmospheric inverse modeling with known physical bounds: an example from trace gas emissions Geoscientific Model Development Discussions, 6, 4531-4562, 2013 Author(s): S. M. Miller, A. M. Michalak, and P. J. Levi Many inverse problems in the atmospheric sciences involve parameters with known physical constraints. Examples include non-negativity (e.g., emissions of some urban air pollutants) or upward limits implied by reaction or solubility constants. However, probabilistic inverse modeling approaches based on Gaussian assumptions cannot incorporate such bounds and thus often produce unrealistic results. The atmospheric literature lacks consensus on the best means to overcome this problem, and existing atmospheric studies rely on a limited number of the possible methods with little examination of the relative merits of each. This paper investigates the applicability of several approaches to bounded inverse problems and is also the first application of Markov chain Monte Carlo (MCMC) to estimation of atmospheric trace gas fluxes. The approaches discussed here are broadly applicable. A common method of data transformations is found to unrealistically skew estimates for the examined example application. The method of Lagrange multipliers and two MCMC methods yield more realistic and accurate results. In general, the examined MCMC approaches produce the most realistic result but can require substantial computational time. Lagrange multipliers offer an appealing alternative for large, computationally intensive problems when exact uncertainty bounds are less central to the analysis. A synthetic data inversion of US anthropogenic methane emissions illustrates the strengths and weaknesses of each approach.

Description: A database and tool for boundary conditions for regional air quality modeling: description and evaluation Geoscientific Model Development Discussions, 6, 4665-4704, 2013 Author(s): B. H. Henderson, F. Akhtar, H. O. T. Pye, S. L. Napelenok, and W. T. Hutzell Transported air pollutants receive increasing attention as regulations tighten and global concentrations increase. The need to represent international transport in regional air quality assessments requires improved representation of boundary concentrations. Currently available observations are too sparse vertically to provide boundary information, particularly for ozone precursors, but global simulations can be used to generate spatially and temporally varying Lateral Boundary Conditions (LBC). This study presents a public database of global simulations designed and evaluated for use as LBC for air quality models (AQMs). The database covers the contiguous United States (CONUS) for the years 2000–2010 and contains hourly varying concentrations of ozone, aerosols, and their precursors. The database is complimented by a tool for configuring the global results as inputs to regional scale models (e.g., Community Multiscale Air Quality or Comprehensive Air quality Model with extensions). This study also presents an example application based on the CONUS domain, which is evaluated against satellite retrieved ozone vertical profiles. The results show performance is largely within uncertainty estimates for the Tropospheric Emission Spectrometer (TES) with some exceptions. The major difference shows a high bias in the upper troposphere along the southern boundary in January. This publication documents the global simulation database, the tool for conversion to LBC, and the fidelity of concentrations on the boundaries. This documentation is intended to support applications that require representation of long-range transport of air pollutants.

Description: Effects of vegetation structure on biomass accumulation in a Balanced Optimality Structure Vegetation Model (BOSVM v1.0) Geoscientific Model Development Discussions, 6, 4603-4663, 2013 Author(s): Z. Yin, S. C. Dekker, B. J. J. M. van den Hurk, and H. A. Dijkstra A myriad of interactions exist between vegetation and local climate for arid and semi-arid regions. Vegetation function, structure and individual behavior have large impacts on carbon-water-energy balances, which consequently influence local climate variability that, in turn, feeds back to the vegetation. In this study, a conceptual vegetation structure scheme is formulated and tested in a new carbon-water-energy coupled model to explore the importance of vegetation structure and vegetation adaptation to water stress on equilibrium biomass states. Surface energy, water and carbon fluxes are simulated for a range of vegetation structures across a precipitation gradient in West Africa and optimal vegetation structures that maximizes biomass for each precipitation regime are determined. Two different strategies of vegetation adaptation to water stress are included. Under dry conditions vegetation tries to maximize the Water Use Efficiency and Leaf Area Index as it tries to maximize carbon gain. However, an important negative feedback mechanism is found as the vegetation also tries to minimize its cover to optimize the surrounding bare ground area from which water can be extracted, thereby forming patches of vertical vegetation. Under larger precipitation, a positive feedback mechanism is found in which vegetation tries to maximize its cover as it then can reduce water loss from bare soil while having maximum carbon gain due to a large Leaf Area Index. The competition between vegetation and bare soil determines a transition between a "survival" state to a "growing" state.

Description: Influence of management of variables, sampling zones and land units on LR analysis for landslide spatial prevision Natural Hazards and Earth System Science, 13, 2209-2221, 2013 Author(s): R. Greco and M. Sorriso-Valvo Several authors, according to different methodological approaches, have employed logistic Regression (LR), a multivariate statistical analysis adopted to assess the spatial probability of landslide, even though its fundamental principles have remained unaltered. This study aims at assessing the influence of some of these methodological approaches on the performance of LR, through a series of sensitivity analyses developed over a test area of about 300 km 2 in Calabria (southern Italy). In particular, four types of sampling (1 – the whole study area; 2 – transects running parallel to the general slope direction of the study area with a total surface of about 1/3 of the whole study area; 3 – buffers surrounding the phenomena with a 1/1 ratio between the stable and the unstable area; 4 – buffers surrounding the phenomena with a 1/2 ratio between the stable and the unstable area), two variable coding modes (1 – grouped variables; 2 – binary variables), and two types of elementary land (1 – cells units; 2 – slope units) units have been tested. The obtained results must be considered as statistically relevant in all cases (Aroc values 〉 70%), thus confirming the soundness of the LR analysis which maintains high predictive capacities notwithstanding the features of input data. As for the area under investigation, the best performing methodological choices are the following: (i) transects produced the best results (0 〈 P(y) ≤ 93.4%; Aroc = 79.5%); (ii) as for sampling modalities, binary variables (0 〈 P(y) ≤ 98.3%; Aroc = 80.7%) provide better performance than ordinated variables; (iii) as for the choice of elementary land units, slope units (0 〈 P(y) ≤ 100%; Aroc = 84.2%) have obtained better results than cells matrix.

Description: Risk evolution: how can changes in the built environment influence the potential loss of natural hazards? Natural Hazards and Earth System Science, 13, 2195-2207, 2013 Author(s): B. Schwendtner, M. Papathoma-Köhle, and T. Glade Alpine areas often suffer significant loss and damage due to a range of natural processes such as landslides, debris flows, snow avalanches or floods. Sealing of the soil surface, settling in endangered areas and enhanced human intervention in the natural settings, as well as socio-economic changes, increase the risk and susceptibility of built environments to natural hazards and the costs of the consequences in a spatio-temporal context. The present study examines the loss estimation of a particular debris flow event for different points in time. The event occurred in August 1987, affected the municipality Martell in South Tyrol, Italy, and resulted in a total cost of € 25 million. The approach presented in this paper focuses on the changes of the land use and settlement expansion in the area since 1954 and attempts to assess the monetary impact of a similar event, which could have happened before (1954, 1985) or following the actual event (1992, 1999, 2006). The method applied is based on the use of a vulnerability curve which was developed for the specific area, based on the documentation of the damage of the 1987 event. Based on this curve, a loss estimation was carried out in order to visualise the risk evolution in a period of 52 yr (1954 to 2006). The results show a significant increase in the extent of the built environment (number, size and value of buildings) which consequently reflect an increase of the potential overall loss through the years. The method can be used in order to assess the potential loss for future scenarios based on different spatial patterns of the built environment.

Description: Wind shear over the Nice Côte d'Azur airport: case studies Natural Hazards and Earth System Science, 13, 2223-2238, 2013 Author(s): A. Boilley and J.-F. Mahfouf The Nice Côte d'Azur international airport is subject to horizontal low-level wind shears. Detecting and predicting these hazards is a major concern for aircraft security. A measurement campaign took place over the Nice airport in 2009 including 4 anemometers, 1 wind lidar and 1 wind profiler. Two wind shear events were observed during this measurement campaign. Numerical simulations were carried out with Meso-NH in a configuration compatible with near-real time applications to determine the ability of the numerical model to predict these events and to study the meteorological situations generating an horizontal wind shear. A comparison between numerical simulation and the observation dataset is conducted in this paper.

Description: A distributed computing approach to improve the performance of the Parallel Ocean Program (v2.1) Geoscientific Model Development Discussions, 6, 4705-4744, 2013 Author(s): B. van Werkhoven, J. Maassen, M. Kliphuis, H. A. Dijkstra, S. E. Brunnabend, M. van Meersbergen, F. J. Seinstra, and H. E. Bal The Parallel Ocean Program (POP) is used in many strongly eddying ocean circulation simulations. Ideally one would like to do thousand-year long simulations, but the current performance of POP prohibits this type of simulations. In this work, using a new distributed computing approach, two innovations to improve the performance of POP are presented. The first is a new block partitioning scheme for the optimization of the load balancing of POP such that it can be run efficiently in a multi-platform setting. The second is an implementation of part of the POP model code on Graphics Processing Units. We show that the combination of both innovations leads to a substantial performance increase also when running POP simultaneously over multiple computational platforms.

Description: Explosive development of winter storm Xynthia over the subtropical North Atlantic Ocean Natural Hazards and Earth System Science, 13, 2239-2251, 2013 Author(s): M. L. R. Liberato, J. G. Pinto, R. M. Trigo, P. Ludwig, P. Ordóñez, D. Yuen, and I. F. Trigo In winter of 2009–2010 south-western Europe was hit by several destructive windstorms. The most important was Xynthia (26–28 February 2010), which caused 64 reported casualties and was classified as the 2nd most expensive natural hazard event for 2010 in terms of economic losses. In this work we assess the synoptic evolution, dynamical characteristics and the main impacts of storm Xynthia, whose genesis, development and path were very uncommon. Wind speed gusts observed at more than 500 stations across Europe are evaluated as well as the wind gust field obtained with a regional climate model simulation for the entire North Atlantic and European area. Storm Xynthia was first identified on 25 February around 30° N, 50° W over the subtropical North Atlantic Ocean. Its genesis occurred on a region characterized by warm and moist air under the influence of a strong upper level wave embedded in the westerlies. Xynthia followed an unusual SW–NE path towards Iberia, France and central Europe. The role of moist air masses on the explosive development of Xynthia is analysed by considering the evaporative sources. A lagrangian model is used to identify the moisture sources, sinks and moisture transport associated with the cyclone during its development phase. The main supply of moisture is located over an elongated region of the subtropical North Atlantic Ocean with anomalously high SST, confirming that the explosive development of storm Xynthia had a significant contribution from the subtropics.

Description: Inherently mass-conservative version of the semi-Lagrangian Absolute Vorticity (SL-AV) atmospheric model dynamical core Geoscientific Model Development Discussions, 6, 4809-4832, 2013 Author(s): V. V. Shashkin and M. A. Tolstykh The semi-Lagrangian Absolute Vorticity (SL-AV) atmospheric model is the global semi-Lagrangian hydrostatic model used for operational medium-range and seasonal forecasts at Hydrometeorological centre of Russia. The distinct feature of SL-AV dynamical core is the semi-implicit semi-Lagrangian vorticity-divergence formulation on the unstaggered grid. Semi-implicit semi-Lagrangian approach allows for long time steps while violates the global and local mass-conservation. In particular, the total mass in simulations with semi-Lagrangian models can drift significantly if no aposteriori mass-fixing algorithms are applied. However, the global mass-fixing algorithms degrade the local mass conservation. The inherently mass-conservative version of SL-AV model dynamical core presented in the article ensures global and local mass conservation without mass-fixing algorithms. The mass conservation is achieved with the introduction of the finite-volume semi-Lagrangian discretization for continuity equation based on the 3-D extension of the conservative cascade semi-Lagrangian transport scheme (CCS). The numerical experiments show that the presented new version of SL-AV dynamical core combines the accuracy and stability of the standard SL-AV dynamical core with the mass-conservation properties. The results of the mountain induced Rossby wave test and baroclinic instability test for mass-conservative dynamical core are found to be in agreement with the results available in literature.

Description: A fast input/output library for high resolution climate models Geoscientific Model Development Discussions, 6, 4775-4807, 2013 Author(s): X. Huang, W. Wang, H. Fu, G. Yang, B. Wang, and C. Zhang We describe the design and implementation of Climate Fast Input/Output (CFIO), a fast input/output (I/O) library for high resolution climate models. CFIO provides a simple method for modelers to overlap the I/O phase with the computing phase automatically, so as to shorten the running time of numerical simulations. To minimize the code modifications required for porting, CFIO provides similar interfaces and features to Parallel network Common Data Form (PnetCDF), which is one of the most widely used I/O libraries in climate models. We deployed CFIO in three high resolution climate models, including two ocean models (POP and LICOM) and one sea ice model (CICE). The experimental results show that CFIO improves the performance of climate models significantly versus the original serial I/O approach. When running with CFIO at 0.1° resolution with about 1000 CPU cores, we managed to reduce the running time by factors of 7.9, 4.6 and 2.0 for POP, CICE, and LICOM respectively. We also compared the performance of CFIO against PnetCDF in different scenarios. For scenarios with both data output operations and computations, CFIO decreases the I/O overhead by a factor of 5.1 compared to PnetCDF.

Description: Seismic behavior of buried pipelines constructed by design criteria and construction specifications of both Korea and the US Natural Hazards and Earth System Science, 13, 2271-2278, 2013 Author(s): S.-S. Jeon Earthquake loss estimation systems in the US, for example HAZUS (Hazard in US), have been established based on sufficient damage records for the purpose of prevention and efficient response to earthquake hazards; however, in Korea, insufficient data sets of earthquakes and damage records are currently available. In this study, the earthquake damages to pipelines in Korea using the pipeline repair rate (RR) recommended in HAZUS was reevaluated with the degree of confidence when RR is used without modification for the damage estimation of pipelines in Korea. The numerical analyses using a commercial finite element model, ABAQUS, were carried out to compare stresses and strains mobilized in both brittle and ductile pipelines constructed by the design criteria and construction specifications of both Korea and the US. These pipelines were embedded in dense sand overlying three different in situ soils (clay, sand, and gravel) subjected to earthquake excitations with peak ground accelerations (PGAs) of 0.2 to 1.2 g and 1994 Northridge and 1999 Chi-Chi earthquake loadings. The numerical results show that differences in the stress and strain rates are less than 10%. This implies that RR in HAZUS can be used for earthquake damage estimation of pipelines with a 90% confidence level in Korea.

Description: Heterogeneity in glacier response in the upper Shyok valley, northeast Karakoram The Cryosphere, 7, 1385-1398, 2013 Author(s): R. Bhambri, T. Bolch, P. Kawishwar, D. P. Dobhal, D. Srivastava, and B. Pratap Glaciers in the Karakoram show long-term irregular behaviour with comparatively frequent and sudden advances. A glacier inventory of the upper Shyok valley situated in northeast Karakoram has been generated for the year 2002 using Landsat ETM+ and SRTM3 DEM as baseline data for the investigations and subsequent change analysis. The upper Shyok valley contained 2123 glaciers (larger than 0.02 km 2 in size) with an area of 2977.9 ± 95.3 km 2 in 2002. Out of these, 18 glaciers with an area of 1004.1 ± 32.1 km 2 showed surge-type behaviour. Change analysis based on Hexagon KH-9 (years 1973 and 1974) and Landsat TM/ETM+ (years 1989, 2002 and 2011) images had to be restricted to a subset of 136 glaciers (covering an area of 1609.7 ± 51.5 km 2 in 2002) due to adverse snow conditions. The area of the investigated glaciers, including the 18 surge-type glaciers identified, showed no significant changes during all studied periods. However, the analysis provides a hint that the overall glacier area slightly decreased until about 1989 (area 1973: 1613.6 ± 43.6 km 2 ; area 1989: 1602.0 ± 33.6 km 2 ) followed by an increase (area 2002: 1609.7 ± 51.5; area 2011: 1615.8 ± 35.5 km 2 ). Although the overall change in area is insignificant, advances in glacier tongues since the end of the 1980s are clearly visible. Detailed estimations of length changes for individual glaciers since the 1970s and for Central Rimo Glacier since the 1930s confirm the irregular retreat and advance.

Description: Application and evaluation of McICA scheme with new radiation code in BCC_AGCM2.0.1 Geoscientific Model Development Discussions, 6, 4933-4982, 2013 Author(s): given_name prefix surname suffix, H. Zhang, X. Jing, and J. Li This research incorporates the Monte Carlo Independent Column Approximation (McICA) scheme with the correlated k-distribution BCC-RAD radiation model into the climate model BCC_AGCM2.0.1 and examines the impacts on modeled climate through several simulations with variations in cloud structures. Results from experiments with consistent sub-grid cloud structures show that both clear-sky radiation fluxes and cloud radiative forcings (CRFs) calculated by the new scheme are mostly improved relative to those calculated from the original one. The modeled atmospheric temperature and specific humidity are also improved due to changes in the radiative heating rates. The vertical overlap of fractional clouds and horizontal distribution of cloud condensation are important for computing CRFs. The maximum changes in seasonal CRF using the general overlap assumption (GenO) with different decorrelation depths ( L cf ) are larger than 10 and 20 Wm 2 for longwave (LW) CRF and shortwave (SW) CRF, respectively, mostly located in the Tropics and mid-latitude storm tracks. Larger (smaller) L cf in the Tropics (mid-latitude storm tracks) yield better cloud fraction and CRF compared with observations. The inclusion of an observation-based horizontal inhomogeneity of cloud condensation has a distinct impact on LW CRF and SW CRF, with global means of ∼1.2 Wm −2 and ∼3.7 Wm −2 at the top of atmosphere, respectively, making these much closer to observations. These results prove the reliability of the new model configuration to be used in BCC_AGCM2.0.1 for climate simulations, and also indicate that more detailed real-world information on cloud structures should be obtained to constrain cloud settings in McICA in the future.

Description: Weak layer fracture: facets and depth hoar The Cryosphere, 7, 1447-1453, 2013 Author(s): I. Reiweger and J. Schweizer Understanding failure initiation within weak snow layers is essential for modeling and predicting dry-snow slab avalanches. We therefore performed laboratory experiments with snow samples containing a weak layer consisting of either faceted crystals or depth hoar. During these experiments the samples were loaded with different loading rates and at various tilt angles until fracture. The strength of the samples decreased with increasing loading rate and increasing tilt angle. Additionally, we took pictures of the side of four samples with a high-speed video camera and calculated the displacement using a particle image velocimetry (PIV) algorithm. The fracture process within the weak layer could thus be observed in detail. Catastrophic failure started due to a shear fracture just above the interface between the depth hoar layer and the underlying crust.

Description: Scatter of mass changes estimates at basin scale for Greenland and Antarctica The Cryosphere, 7, 1411-1432, 2013 Author(s): V. R. Barletta, L. S. Sørensen, and R. Forsberg During the last decade, the GRACE mission has provided valuable data for determining the mass changes of the Greenland and Antarctic ice sheets. Yet, discrepancies still exist in the published mass balance results, and comprehensive analyses on the sources of errors and discrepancies are lacking. Here, we present monthly mass changes together with trends derived from GRACE data at basin scale for both the Greenland and Antarctic ice sheets, and we assess the variability and errors for each of the possible sources of discrepancies, and we do this in an unprecedented systematic way, taking into account mass inference methods, data sets and background models. We find a very good agreement between the monthly mass change results derived from two independent methods, which represents a cross validation. For the monthly solutions, we find that most of the scatter is caused by the use of the two different data sets rather than the two different methods applied. Besides the well-known GIA trend uncertainty, we find that the geocenter motion and the recent de-aliasing corrections significantly impact the trends, with contributions of +13.2 Gt yr −1 and −20 Gt yr −1 , respectively, for Antarctica, which is more affected by these than Greenland. We show differences between the use of release RL04 and the new RL05 and confirm a lower noise content in the new release. The overall scatter of the solutions well exceeds the uncertainties propagated from the data errors and the leakage (as done in the past); hence we calculate new sound total errors for the monthly solutions and the trends. We find that the scatter in the monthly solutions caused by applying different estimates of geocenter motion time series (degree-1 corrections) is significant – contributing with up to 40% of the total error. For the whole GRACE period (2003–2011) our trend estimate for Greenland is −234 ± 20 Gt yr −1 and −83 ± 36 Gt yr −1 for Antarctica (−111 ± 15 Gt yr −1 in the western part). We also find a clear (with respect to our errors) increase of mass loss in the last four years.

Description: Seismic zones for Azores based on statistical criteria Natural Hazards and Earth System Science, 13, 2337-2351, 2013 Author(s): M. C. M. Rodrigues and C. S. Oliveira The objective of this paper is to define seismic zones in the Azores based on statistical criteria. These seismic zones will likely be used in seismic simulations of occurrences in the Azores Archipelago. The data used in this work cover the time period from 1915 to 2011. The Azores region was divided into 1° × 1° area units, for which the seismicity and the maximum magnitudes of events were calculated. The seismicity, the largest earthquakes recorded and the geological characteristics of the region were used to group these area units because similar seismic zones must delineate areas with homogeneous seismic characteristics. We have identified seven seismic zones. To verify that the defined areas differ statistically, we considered the following dissimilarity measures (variables): time, size and seismic conditions – the number of seismic events with specific characteristics. Statistical tests, particularly goodness-of-fit tests, allowed us to conclude that, considering these three variables, the seven earthquake zones defined here are statistically distinct.

Description: Sub-ionospheric very low frequency perturbations associated with the 12 May 2008 M = 7.9 Wenchuan earthquake Natural Hazards and Earth System Science, 13, 2331-2336, 2013 Author(s): A. K. Maurya, R. Singh, B. Veenadhari, S. Kumar, and A. K. Singh The present study reports the VLF (very low frequency) sub-ionospheric perturbations observed on transmitter JJI (22.1 kHz), Japan, received at the Indian low-latitude station, Allahabad ( geographic lat. 25.41° N, long 81.93° E), due to Wenchuan earthquake (EQ) that occurred on 12 May 2008 with the magnitude 7.9 and at the depth of 19 km in Sichuan province of Southwest China, located at 31.0° N, 103.4° E. The nighttime amplitude fluctuation analysis gives a significant increase in fluctuation and dispersion two days before EQ, when it crosses 2σ criterion. However, there was no significant change observed in the amplitude trend. The diurnal amplitude variation shows a significant increase in the amplitude of JJI signal on 11 and 12 May 2008. The gravity wave channel and changes in the electric field associated with this EQ seem to be the potential factors of the observed nighttime amplitude fluctuation, dispersion, and significant increase in the signal strength.

Description: A regional climate modelling projection ensemble experiment – NARCliM Geoscientific Model Development Discussions, 6, 5117-5139, 2013 Author(s): J. P. Evans, F. Ji, C. Lee, P. Smith, D. Argüeso, and L. Fita Including the impacts of climate change in decision making and planning processes is a challenge facing many regional governments including the New South Wales (NSW) and Australian Capital Territory (ACT) governments in Australia. NARCliM (NSW/ACT Regional Climate Modelling project) is a regional climate modelling project that aims to provide a comprehensive and consistent set of climate projections that can be used by all relevant government departments when considering climate change. To maximise end user engagement and ensure outputs are relevant to the planning process, a series of stakeholder workshops were run to define key aspects of the model experiment including spatial resolution, time slices, and output variables. As with all such experiments, practical considerations limit the number of ensembles members that can be simulated such that choices must be made concerning which Global Climate Models (GCMs) to downscale from, and which Regional Climate Models (RCMs) to downscale with. Here a methodology for making these choices is proposed that aims to sample the uncertainty in both GCMs and RCMs, as well as spanning the range of future climate projections present in the full GCM ensemble. The created ensemble provides a more robust view of future regional climate changes.

Description: Climatic drivers of seasonal glacier mass balances: an analysis of 6 decades at Glacier de Sarennes (French Alps) The Cryosphere, 7, 47-66, 2013 Author(s): E. Thibert, N. Eckert, and C. Vincent Refined temporal signals extracted from a winter and summer mass balance series recorded at Glacier de Sarennes (French Alps) using variance decomposition are related to local meteorological data and large-scale North Atlantic Oscillation (NAO) anomalies in terms of interannual variability, trends of the low-frequency signals, and breaks in the time series. The winter balance has increased by +23% since 1976 due to more precipitation in early and late winter. The summer balance has decreased since 1982 due to a 43% increase in snow and ice melt. A 24-day lengthening of the ablation period – mainly due to longer ice ablation – is the main component in the overall increase in ablation. In addition, the last 25 yr have seen increases in ablation rates of 14 and 10% for snow and ice, respectively. A simple degree-day analysis can account for both the snow/ice melt rate rise and the lengthening of the ablation period as a function of higher air temperatures. From the same analysis, the equilibrium-line altitude of this 45° N latitude south-facing glacier has a sensitivity to temperature of +93 m °C −1 around its mean elevation of 3100 m a.s.l. over 6 decades. The sensitivity of summer balance to temperature is −0.62 m w.e. yr −1 °C −1 for a typical 125-day-long ablation season. Finally, the correlation of winter and summer mass balance terms with NAO anomalies is investigated. Singularly, highest values are obtained between winter NAO anomalies and summer balance. Winter NAO anomalies and winter balance and precipitation are almost disconnected. However, these results strongly depend on how the NAO signal is smoothed, so that the link between Sarennes mass balance seasonal terms and NAO signal remains tenuous and hard to interpret.

Description: The ICON-1.2 hydrostatic atmospheric dynamical core on triangular grids – Part 1: Formulation and performance of the baseline version Geoscientific Model Development Discussions, 6, 59-119, 2013 Author(s): H. Wan, M. A. Giorgetta, G. Zängl, M. Restelli, D. Majewski, L. Bonaventura, K. Fröhlich, D. Reinert, P. Rípodas, and L. Kornblueh A hydrostatic atmospheric dynamical core is developed for the purpose of global climate modelling. The model applies finite-difference methods to discretize the primitive equations on spherical icosahedral grids, using C-type staggering with triangles as control volumes for mass. This paper documents the numerical methods employed in the baseline version of the model, discusses their properties, and presents results from various idealized test cases. The evaluation shows that the new dynamical core is able to correctly represent the evolution of baroclinic eddies in the atmosphere as well as their role in heat and momentum transport. The simulations compare well with the reference solutions, and show a clear trend of convergence as the horizontal resolution increases. First results from two aqua-planet simulations are also presented, in which the equatorial wave spectra derived from tropical precipitation agree well with those simulated by a spectral transform model. The new dynamical core thus provides a good basis for further model development. Certain aspects of the model formulation that need further investigation and improvement are also pointed out.

Description: A synthesis of the Antarctic surface mass balance during the last 800 yr The Cryosphere, 7, 303-319, 2013 Author(s): M. Frezzotti, C. Scarchilli, S. Becagli, M. Proposito, and S. Urbini Global climate models suggest that Antarctic snowfall should increase in a warming climate and mitigate rises in the sea level. Several processes affect surface mass balance (SMB), introducing large uncertainties in past, present and future ice sheet mass balance. To provide an extended perspective on the past SMB of Antarctica, we used 67 firn/ice core records to reconstruct the temporal variability in the SMB over the past 800 yr and, in greater detail, over the last 200 yr. Our SMB reconstructions indicate that the SMB changes over most of Antarctica are statistically negligible and that the current SMB is not exceptionally high compared to the last 800 yr. High-accumulation periods have occurred in the past, specifically during the 1370s and 1610s. However, a clear increase in accumulation of more than 10% has occurred in high SMB coastal regions and over the highest part of the East Antarctic ice divide since the 1960s. To explain the differences in behaviour between the coastal/ice divide sites and the rest of Antarctica, we suggest that a higher frequency of blocking anticyclones increases the precipitation at coastal sites, leading to the advection of moist air in the highest areas, whereas blowing snow and/or erosion have significant negative impacts on the SMB at windy sites. Eight hundred years of stacked records of the SMB mimic the total solar irradiance during the 13th and 18th centuries. The link between those two variables is probably indirect and linked to a teleconnection in atmospheric circulation that forces complex feedback between the tropical Pacific and Antarctica via the generation and propagation of a large-scale atmospheric wave train.

Description: The GREENROOF module (v7.3) for modelling green roof hydrological and energetic performances within TEB Geoscientific Model Development Discussions, 6, 1127-1172, 2013 Author(s): C. S. de Munck, A. Lemonsu, R. Bouzouidja, V. Masson, and R. Claverie The need to prepare cities for climate change adaptation requests the urban modeller community to implement within their models sustainable adaptation strategies to be tested against specific city morphologies and scenarios. Greening city roofs is part of these strategies. In this context, a GREENROOF module for TEB (Town Energy Balance) has been developed to model the interactions between buildings and green roof systems at the scale of the city. This module allows one to describe an extensive green roof composed of four functional layers (vegetation – grasses or sedums, substrate, retention/drainage layers and artificial roof layers) and to model vegetation-atmosphere fluxes of heat, water and momentum, as well as the hydrological and thermal fluxes throughout the substrate and the drainage layers, and the thermal coupling with the structural building envelope. TEB-GREENROOF (v7.3) is therefore able to represent the impact of climate forcings on the functioning of the green roof vegetation and, conversely, the influence of the green roof on the local climate. A calibration exercise to adjust the model to the peculiar hydrological characteristics of the substrates and drainage layers commonly found on green roofs is performed for a case study located in Nancy (France) which consists of an extensive green roof with sedums. Model results for the optimum hydrological calibration show a good dynamics for the substrate water content which is nevertheless under-estimated but without impacting too much the green roof temperatures since they present a good agreement with observations. These results are encouraging with regard to modelling the impact of green roofs on thermal indoor comfort and energy consumption at the scale of cities, for which GREENROOF will be running with the building energy version of TEB, TEB-BEM. Moreover, the green roof studied for GREENROOF evaluation being a city-widespread type of extensive green roof, the hydrological characteristics derived through the evaluation exercise will be used as the standard configuration to model extensive green roofs at the scale of cities.

Description: A survey of strong high-frequency sea level oscillations along the US East Coast between 2006 and 2011 Natural Hazards and Earth System Science, 13, 473-482, 2013 Author(s): S. Pasquet, I. Vilibić, and J. Šepić A systematic survey of high-frequency sea level oscillations (

Description: A fuzzy decision making system for building damage map creation using high resolution satellite imagery Natural Hazards and Earth System Science, 13, 455-472, 2013 Author(s): H. Rastiveis, F. Samadzadegan, and P. Reinartz Recent studies have shown high resolution satellite imagery to be a powerful data source for post-earthquake damage assessment of buildings. Manual interpretation of these images, while being a reliable method for finding damaged buildings, is a subjective and time-consuming endeavor, rendering it unviable at times of emergency. The present research, proposes a new state-of-the-art method for automatic damage assessment of buildings using high resolution satellite imagery. In this method, at the first step a set of pre-processing algorithms are performed on the images. Then, extracting a candidate building from both pre- and post-event images, the intact roof part after an earthquake is found. Afterwards, by considering the shape and other structural properties of this roof part with its pre-event condition in a fuzzy inference system, the rate of damage for each candidate building is estimated. The results obtained from evaluation of this algorithm using QuickBird images of the December 2003 Bam, Iran, earthquake prove the ability of this method for post-earthquake damage assessment of buildings.

Description: The chemistry CATT–BRAMS model (CCATT–BRAMS 4.5): a regional atmospheric model system for integrated air quality and weather forecasting and research Geoscientific Model Development Discussions, 6, 1173-1222, 2013 Author(s): K. M. Longo, S. R. Freitas, M. Pirre, V. Marécal, L. F. Rodrigues, J. Panetta, M. F. Alonso, N. E. Rosário, D. S. Moreira, M. S. Gácita, J. Arteta, R. Fonseca, R. Stockler, D. M. Katsurayama, A. Fazenda, and M. Bela The Coupled Chemistry Aerosol-Tracer Transport model to the Brazilian developments on the Regional Atmospheric Modeling System (CCATT–BRAMS, version 4.5) is an online regional chemical transport model designed for local and regional studies of atmospheric chemistry from surface to the lower stratosphere suitable both for operational and research purposes. It includes gaseous/aqueous chemistry, photochemistry, scavenging and dry deposition. The CCATT–BRAMS model takes advantages of the BRAMS specific development for the tropics/subtropics and of the recent availability of preprocessing tools for chemical mechanisms and of fast codes for photolysis rates. BRAMS includes state-of-the-art physical parameterizations and dynamic formulations to simulate atmospheric circulations of scales down to meters. The online coupling between meteorology and chemistry allows the system to be used for simultaneous atmospheric weather and chemical composition forecasts as well as potential feedbacks between them. The entire system comprises three preprocessing software tools for chemical mechanism (which are user defined), aerosol and trace gases emission fields and atmospheric and chemistry fields for initial and boundary conditions. In this paper, the model description is provided along evaluations performed using observational data obtained from ground-based stations, instruments aboard of aircrafts and retrieval from space remote sensing. The evaluation takes into account model application on different scales from megacities and Amazon Basin up to intercontinental region of the Southern Hemisphere.

Description: Parallel algorithms for planar and spherical Delaunay construction with an application to centroidal Voronoi tessellations Geoscientific Model Development Discussions, 6, 1427-1466, 2013 Author(s): D. W. Jacobsen, M. Gunzburger, T. Ringler, J. Burkardt, and J. Peterson A new algorithm, featuring overlapping domain decompositions, for the parallel construction of Delaunay and Voronoi tessellations is developed. Overlapping allows for the seamless stitching of the partial Delaunay tessellations constructed by individual processors. The algorithm is then modified, by the addition of stereographic projections, to handle the parallel construction of spherical Delaunay and Voronoi tessellations. The algorithms are then embedded into algorithms for the parallel construction of planar and spherical centroidal Voronoi tessellations that require multiple constructions of Delaunay tessellations. Computational tests are used to demonstrate the efficiency and scalability of the algorithms for spherical Delaunay and centroidal Voronoi tessellations. Compared to serial versions of the algorithm and to the STRIPACK-based approaches, the new parallel algorithm results in significant speedups for the construction of spherical centroidal Voronoi tessellations.

Description: 19 May 2011 Kütahya – Simav earthquake and evaluation of existing sample RC buildings according to the TEC-2007 criteria Natural Hazards and Earth System Science, 13, 505-522, 2013 Author(s): M. H. Arslan, M. Olgun, M. A. Köroğlu, I. H. Erkan, A. Köken, and O. Tan This study examines the damage caused to reinforced concrete structures by the 2011 earthquake that occurred in Simav, Turkey. The study briefly reports on post-earthquake field observations, tectonic characteristics of the earthquake area, geotechnical characteristics of the field, and seismic characteristics of the earthquake. The main part of the study comprises a field study, material experiments, and performance analyses of two reinforced concrete buildings that survived the earthquake with medium level damage. The building performance was calculated and assessed according to the Turkish Earthquake Code requirements for existing building stock, and recommendations were made based on the findings.

Description: Tsunami damping by mangrove forest: a laboratory study using parameterized trees Natural Hazards and Earth System Science, 13, 483-503, 2013 Author(s): A. Strusińska-Correia, S. Husrin, and H. Oumeraci Tsunami attenuation by coastal vegetation was examined under laboratory conditions for mature mangroves Rhizophora sp. The developed novel tree parameterization concept, accounting for both bio-mechanical and structural tree properties, allowed to substitute the complex tree structure by a simplified tree model of identical hydraulic resistance. The most representative parameterized mangrove model was selected among the tested models with different frontal area and root density, based on hydraulic test results. The selected parameterized tree models were arranged in a forest model of different width and further tested systematically under varying incident tsunami conditions (solitary waves and tsunami bores). The damping performance of the forest models under these two flow regimes was compared in terms of wave height and force envelopes, wave transmission coefficient as well as drag and inertia coefficients. Unlike the previous studies, the results indicate a significant contribution of the foreshore topography to solitary wave energy reduction through wave breaking in comparison to that attributed to the forest itself. A similar rate of tsunami transmission (ca. 20%) was achieved for both flow conditions (solitary waves and tsunami bores) and the widest forest (75 m in prototype) investigated. Drag coefficient C D attributed to the solitary waves tends to be constant ( C D = 1.5) over the investigated range of the Reynolds number.

Description: Future Arctic marine access: analysis and evaluation of observations, models, and projections of sea ice The Cryosphere, 7, 321-332, 2013 Author(s): T. S. Rogers, J. E. Walsh, T. S. Rupp, L. W. Brigham, and M. Sfraga There is an emerging need for regional applications of sea ice projections to provide more accuracy and greater detail to scientists, national, state and local planners, and other stakeholders. The present study offers a prototype for a comprehensive, interdisciplinary study to bridge observational data, climate model simulations, and user needs. The study's first component is an observationally based evaluation of Arctic sea ice trends during 1980–2008, with an emphasis on seasonal and regional differences relative to the overall pan-Arctic trend. Regional sea ice loss has varied, with a significantly larger decline of winter maximum (January–March) extent in the Atlantic region than in other sectors. A lead–lag regression analysis of Atlantic sea ice extent and ocean temperatures indicates that reduced sea ice extent is associated with increased Atlantic Ocean temperatures. Correlations between the two variables are greater when ocean temperatures lag rather than lead sea ice. The performance of 13 global climate models is evaluated using three metrics to compare sea ice simulations with the observed record. We rank models over the pan-Arctic domain and regional quadrants and synthesize model performance across several different studies. The best performing models project reduced ice cover across key access routes in the Arctic through 2100, with a lengthening of seasons for marine operations by 1–3 months. This assessment suggests that the Northwest and Northeast Passages hold potential for enhanced marine access to the Arctic in the future, including shipping and resource development opportunities.

Description: Bedmap2: improved ice bed, surface and thickness datasets for Antarctica The Cryosphere, 7, 375-393, 2013 Author(s): P. Fretwell, H. D. Pritchard, D. G. Vaughan, J. L. Bamber, N. E. Barrand, R. Bell, C. Bianchi, R. G. Bingham, D. D. Blankenship, G. Casassa, G. Catania, D. Callens, H. Conway, A. J. Cook, H. F. J. Corr, D. Damaske, V. Damm, F. Ferraccioli, R. Forsberg, S. Fujita, Y. Gim, P. Gogineni, J. A. Griggs, R. C. A. Hindmarsh, P. Holmlund, J. W. Holt, R. W. Jacobel, A. Jenkins, W. Jokat, T. Jordan, E. C. King, J. Kohler, W. Krabill, M. Riger-Kusk, K. A. Langley, G. Leitchenkov, C. Leuschen, B. P. Luyendyk, K. Matsuoka, J. Mouginot, F. O. Nitsche, Y. Nogi, O. A. Nost, S. V. Popov, E. Rignot, D. M. Rippin, A. Rivera, J. Roberts, N. Ross, M. J. Siegert, A. M. Smith, D. Steinhage, M. Studinger, B. Sun, B. K. Tinto, B. C. Welch, D. Wilson, D. A. Young, C. Xiangbin, and A. Zirizzotti We present Bedmap2, a new suite of gridded products describing surface elevation, ice-thickness and the seafloor and subglacial bed elevation of the Antarctic south of 60° S. We derived these products using data from a variety of sources, including many substantial surveys completed since the original Bedmap compilation (Bedmap1) in 2001. In particular, the Bedmap2 ice thickness grid is made from 25 million measurements, over two orders of magnitude more than were used in Bedmap1. In most parts of Antarctica the subglacial landscape is visible in much greater detail than was previously available and the improved data-coverage has in many areas revealed the full scale of mountain ranges, valleys, basins and troughs, only fragments of which were previously indicated in local surveys. The derived statistics for Bedmap2 show that the volume of ice contained in the Antarctic ice sheet (27 million km 3 ) and its potential contribution to sea-level rise (58 m) are similar to those of Bedmap1, but the mean thickness of the ice sheet is 4.6% greater, the mean depth of the bed beneath the grounded ice sheet is 72 m lower and the area of ice sheet grounded on bed below sea level is increased by 10%. The Bedmap2 compilation highlights several areas beneath the ice sheet where the bed elevation is substantially lower than the deepest bed indicated by Bedmap1. These products, along with grids of data coverage and uncertainty, provide new opportunities for detailed modelling of the past and future evolution of the Antarctic ice sheets.

Description: Variability and trends in Laptev Sea ice outflow between 1992–2011 The Cryosphere, 7, 349-363, 2013 Author(s): T. Krumpen, M. Janout, K. I. Hodges, R. Gerdes, F. Girard-Ardhuin, J. A. Hölemann, and S. Willmes Variability and trends in seasonal and interannual ice area export out of the Laptev Sea between 1992 and 2011 are investigated using satellite-based sea ice drift and concentration data. We found an average total winter (October to May) ice area transport across the northern and eastern Laptev Sea boundaries (NB and EB) of 3.48 × 10 5 km 2 . The average transport across the NB (2.87 × 10 5 km 2 ) is thereby higher than across the EB (0.61 × 10 5 km 2 ), with a less pronounced seasonal cycle. The total Laptev Sea ice area flux significantly increased over the last decades (0.85 × 10 5 km 2 decade −1 , p 〉 0.95), dominated by increasing export through the EB (0.55 × 10 5 km 2 decade −1 , p 〉 0.90), while the increase in export across the NB is smaller (0.3 × 10 5 km 2 decade −1 ) and statistically not significant. The strong coupling between across-boundary SLP gradient and ice drift velocity indicates that monthly variations in ice area flux are primarily controlled by changes in geostrophic wind velocities, although the Laptev Sea ice circulation shows no clear relationship with large-scale atmospheric indices. Also there is no evidence of increasing wind velocities that could explain the overall positive trends in ice export. The increased transport rates are rather the consequence of a changing ice cover such as thinning and/or a decrease in concentration. The use of a back-propagation method revealed that most of the ice that is incorporated into the Transpolar Drift is formed during freeze-up and originates from the central and western part of the Laptev Sea, while the exchange with the East Siberian Sea is dominated by ice coming from the central and southeastern Laptev Sea. Furthermore, our results imply that years of high ice export in late winter (February to May) have a thinning effect on the ice cover, which in turn preconditions the occurence of negative sea ice extent anomalies in summer.

Description: Retention and radiative forcing of black carbon in eastern Sierra Nevada snow The Cryosphere, 7, 365-374, 2013 Author(s): K. M. Sterle, J. R. McConnell, J. Dozier, R. Edwards, and M. G. Flanner When contaminated by absorbing particles, such as refractory black carbon (rBC) and continental dust, snow's albedo decreases and thus its absorption of solar radiation increases, thereby hastening snowmelt. For this reason, an understanding of rBC's affect on snow albedo, melt processes, and radiation balance is critical for water management, especially in a changing climate. Measurements of rBC in a sequence of snow pits and surface snow samples in the eastern Sierra Nevada of California during the snow accumulation and ablation seasons of 2009 show that concentrations of rBC were enhanced sevenfold in surface snow (~25 ng g –1 ) compared to bulk values in the snowpack (~3 ng g –1 ). Unlike major ions, which were preferentially released during the initial melt, rBC and continental dust were retained in the snow, enhancing concentrations well into late spring, until a final flush occurred during the ablation period. We estimate a combined rBC and continental dust surface radiative forcing of 20 to 40 W m −2 during April and May, with dust likely contributing a greater share of the forcing.

Description: Surface undulations of Antarctic ice streams tightly controlled by bedrock topography The Cryosphere, 7, 407-417, 2013 Author(s): J. De Rydt, G. H. Gudmundsson, H. F. J. Corr, and P. Christoffersen Full Stokes flow-line models predict that fast-flowing ice streams transmit information about their bedrock topography most efficiently to the surface for basal undulations with length scales between 1 and 20 times the mean ice thickness. This typical behaviour is independent of the precise values of the flow law and sliding law exponents, and should be universally observable. However, no experimental evidence for this important theoretical prediction has been obtained so far, hence ignoring an important test for the physical validity of current-day ice flow models. In our work we use recently acquired airborne radar data for the Rutford Ice Stream and Evans Ice Stream, and we show that the surface response of fast-flowing ice is highly sensitive to bedrock irregularities with wavelengths of several ice thicknesses. The sensitivity depends on the slip ratio, i.e. the ratio between mean basal sliding velocity and mean deformational velocity. We find that higher values of the slip ratio generally lead to a more efficient transfer, whereas the transfer is significantly dampened for ice that attains most of its surface velocity by creep. Our findings underline the importance of bedrock topography for ice stream dynamics on spatial scales up to 20 times the mean ice thickness. Our results also suggest that local variations in the flow regime and surface topography at this spatial scale cannot be explained by variations in basal slipperiness.

Description: Grounding line transient response in marine ice sheet models The Cryosphere, 7, 395-406, 2013 Author(s): A. S. Drouet, D. Docquier, G. Durand, R. Hindmarsh, F. Pattyn, O. Gagliardini, and T. Zwinger Marine ice-sheet stability is mostly controlled by the dynamics of the grounding line, i.e. the junction between the grounded ice sheet and the floating ice shelf. Grounding line migration has been investigated within the framework of MISMIP (Marine Ice Sheet Model Intercomparison Project), which mainly aimed at investigating steady state solutions. Here we focus on transient behaviour, executing short-term simulations (200 yr) of a steady ice sheet perturbed by the release of the buttressing restraint exerted by the ice shelf on the grounded ice upstream. The transient grounding line behaviour of four different flowline ice-sheet models has been compared. The models differ in the physics implemented (full Stokes and shallow shelf approximation), the numerical approach, as well as the grounding line treatment. Their overall response to the loss of buttressing is found to be broadly consistent in terms of grounding line position, rate of surface elevation change and surface velocity. However, still small differences appear for these latter variables, and they can lead to large discrepancies (〉 100%) observed in terms of ice sheet contribution to sea level when cumulated over time. Despite the recent important improvements of marine ice-sheet models in their ability to compute steady state configurations, our results question the capacity of these models to compute short-term reliable sea-level rise projections.

Description: PEATBOG: a biogeochemical model for analyzing coupled carbon and nitrogen dynamics in northern peatlands Geoscientific Model Development Discussions, 6, 1599-1688, 2013 Author(s): Y. Wu and C. Blodau Elevated nitrogen deposition and climate change alter the vegetation communities and carbon (C) and nitrogen (N) cycling in peatlands. To address this issue we developed a new process-oriented biogeochemical model (PEATBOG) for analyzing coupled carbon and nitrogen dynamics in northern peatlands. The model consists of four submodels, which simulate: (1) daily water table depth and depth profiles of soil moisture, temperature and oxygen levels; (2) competition among three plants functional types (PFTs), production and litter production of plants; (3) decomposition of peat; and (4) production, consumption, diffusion and export of dissolved C and N species in soil water. The model is novel in the integration of the C and N cycles, the explicit spatial resolution belowground, the consistent conceptualization of movement of water and solutes, the incorporation of stoichiometric controls on elemental fluxes and a consistent conceptualization of C and N reactivity in vegetation and soil organic matter. The model was evaluated for the Mer Bleue Bog, near Ottawa, Ontario, with regards to simulation of soil moisture and temperature and the most important processes in the C and N cycles. Model sensitivity was tested for nitrogen input, precipitation, and temperature, and the choices of the most uncertain parameters were justified. A simulation of nitrogen deposition over 40 yr demonstrates the advantages of the PEATBOG model in tracking biogeochemical effects and vegetation change in the ecosystem.

Description: δ 18 O water isotope in the i LOVECLIM model (version 1.0) – Part 3: A paleoperspective based on present-day data-model comparison for oxygen stable isotopes in carbonates Geoscientific Model Development Discussions, 6, 1527-1558, 2013 Author(s): T. Caley and D. M. Roche Oxygen stable isotopes ( 18 O) are among the most usual tools in paleoclimatology/paleoceanography. Simulation of oxygen stable isotopes allows testing how the past variability of these isotopes in water can be interpreted. By modelling the proxy directly in the model, the results can also be directly compared with the data. Water isotopes have been implemented in the global three-dimensional model of intermediate complexity i LOVECLIM allowing fully coupled atmosphere-ocean simulations. In this study, we present the validation of the model results for present day climate against global database for oxygen stable isotopes in carbonates. The limitation of the model together with the processes operating in the natural environment reveal the complexity of use the continental calcite 18 O signal of speleothems for a data-model comparison exercise. On the contrary, the reconstructed surface ocean calcite δ 18 O signal in i LOVECLIM does show a very good agreement with late Holocene database (foraminifers) at the global and regional scales. Our results indicate that temperature and the isotopic composition of the seawater are the main control on the fossil δ 18 O signal recorded in foraminifer shells and that depth habitat and seasonality play a role but have secondary importance. We argue that a data-model comparison for surface ocean calcite δ 18 O in past climate, such as the last glacial maximum (≈21 000 yr), could constitute an interesting tool for mapping the potential shifts of the frontal systems and circulation changes throughout time. Similarly, the potential changes in intermediate oceanic circulation systems in the past could be documented by a data (benthic foraminifers)-model comparison exercise whereas future investigations are necessary in order to quantitatively compare the results with data for the deep ocean.

Description: δ 18 O water isotope in the i LOVECLIM model (version 1.0) – Part 2: Evaluation of model results against observed δ 18 O in water samples Geoscientific Model Development Discussions, 6, 1495-1525, 2013 Author(s): D. M. Roche and T. Caley The H 2 18 O stable isotope was previously introduced in the three coupled components of the Earth System Model i LOVECLIM: atmosphere, ocean and vegetation. The results of a long (5000 yr) pre-industrial equilibrium simulation are presented and evaluated against measurement of H 2 18 O abundance in present-day water for the atmospheric and oceanic components. For the atmosphere, it is found that the model reproduces the observed spatial distribution and relationships to climate variables with some merit, though limitations following our approach are highlighted. Indeed, we obtain the main gradients with a robust representation of the Rayleigh distillation but caveats appear in Antarctica and around the Mediterranean region due to model limitation. For the oceanic component, the agreement between the modelled and observed distribution of water δ 18 O is found to be very good. Mean ocean surface latitudinal gradients are faithfully reproduced as well as the mark of the main intermediate and deep water masses. This opens large prospects for the applications in paleoclimatic context.

Description: δ 18 O water isotope in the i LOVECLIM model (version 1.0) – Part 1: Implementation and verification Geoscientific Model Development Discussions, 6, 1467-1494, 2013 Author(s): D. M. Roche A new 18 O stable water isotope scheme is developed for three components of the i LOVECLIM coupled climate model: atmospheric, oceanic and land surface. The equations required to reproduce the fractionation of stable water isotopes in the simplified atmospheric model ECBilt are developed consistently with the moisture scheme. Simplifications in the processes are made to account for the simplified vertical structure including only one moist layer. Implementation of these equations together with a passive tracer scheme for the ocean and a equilibrium fractionation scheme for the land surface leads to the closure of the (isotopic-)water budget in our climate system. Following the implementation, verification of the existence of usual δ 18 O to climatic relationships are performed for the Rayleigh distillation, the Dansgaard relationship and the δ 18 O–salinity relationship. Advantages and caveats of the approach taken are outlined.

Description: Capabilities and performance of Elmer/Ice, a new generation ice-sheet model Geoscientific Model Development Discussions, 6, 1689-1741, 2013 Author(s): O. Gagliardini, T. Zwinger, F. Gillet-Chaulet, G. Durand, L. Favier, B. de Fleurian, R. Greve, M. Malinen, C. Martín, P. Råback, J. Ruokolainen, M. Sacchettini, M. Schäfer, H. Seddik, and J. Thies The Fourth IPCC Assessment Report concluded that ice-sheet flow models are unable to forecast the current increase of polar ice sheet discharge and the associated contribution to sea-level rise. Since then, the glaciological community has undertaken a huge effort to develop and improve a new generation of ice-flow models, and as a result, a significant number of new ice-sheet models have emerged. Among them is the parallel finite-element model Elmer/Ice, based on the open-source multi-physics code Elmer. It was one of the first full-Stokes models used to make projections for the evolution of the whole Greenland ice sheet for the coming two centuries. Originally developed to solve local ice flow problems of high mechanical and physical complexity, Elmer/Ice has today reached the maturity to solve larger scale problems, earning the status of an ice-sheet model. Here, we summarise almost 10 yr of development performed by different groups. We present the components already included in Elmer/Ice, its numerical performance, selected applications, as well as developments planned for the future.

Description: WRFv3.2-SPAv2: development and validation of a coupled ecosystem-atmosphere model, scaling from surface fluxes of CO 2 and energy to atmospheric profiles Geoscientific Model Development Discussions, 6, 1559-1598, 2013 Author(s): T. L. Smallman, J. B. Moncrieff, and M. Williams The Weather Research & Forecasting meteorological (WRF) model has been coupled to the Soil Plant Atmosphere (SPA) terrestrial ecosystem model, to produce WRF-SPA. SPA generates realistic land-atmosphere exchanges through fully coupled hydrological, carbon and energy cycles. The addition of a land surface model (SPA) capable of modelling biospheric CO 2 exchange allows WRF-SPA to be used for investigating the feedbacks between biosphere carbon balance, meteorology and land management/land use change. We have extensively validated WRF-SPA using multi-annual observations of air temperature, turbulent fluxes, net radiation and net ecosystem exchange of CO 2 at three sites, representing the dominant vegetation types in Scotland (forest, managed grassland and arable agriculture). WRF-SPA generates more realistic seasonal behaviour at the site level compared to an unmodified version of WRF, and produces realistic CO 2 exchanges. WRF-SPA is also able to realistically model atmospheric profiles of CO 2 over Scotland, spanning a 3 yr period (2004–2006), capturing both profile structure, indicating realistic transport, and magnitude indicating appropriate source sink distribution and CO 2 exchange. WRF-SPA makes use of CO 2 tracer pools and can therefore identify and quantify land surface contributions to the modelled atmospheric CO 2 signal at a specified location.

Description: Comparison between different approaches to modeling shallow landslide susceptibility: a case history in Oltrepo Pavese, Northern Italy Natural Hazards and Earth System Science, 13, 559-573, 2013 Author(s): D. Zizioli, C. Meisina, R. Valentino, and L. Montrasio On the 27 and 28 April 2009, the area of Oltrepo Pavese in northern Italy was affected by a very intense rainfall event that caused a great number of shallow landslides. These instabilities occurred on slopes covered by vineyards or recently formed woodlands and caused damage to many roads and one human loss. Based on aerial photographs taken immediately after the event and field surveys, more than 1600 landslides were detected. After acquiring topographical data, geotechnical properties of the soils and land use, susceptibility analysis on a territorial scale was carried out. In particular, different physically based models were applied to two contiguous sites with the same geological context but different typologies and sizes of shallow landslides. This paper presents the comparison between the ex-post results obtained from the different approaches. On the basis of the observed landslide localizations, the accuracy of the different models was evaluated, and the significant results are highlighted.

Description: Bayesian hierarchical modelling of North Atlantic windiness Natural Hazards and Earth System Science, 13, 545-557, 2013 Author(s): E. Vanem and O. N. Breivik Extreme weather conditions represent serious natural hazards to ship operations and may be the direct cause or contributing factor to maritime accidents. Such severe environmental conditions can be taken into account in ship design and operational windows can be defined that limits hazardous operations to less extreme conditions. Nevertheless, possible changes in the statistics of extreme weather conditions, possibly due to anthropogenic climate change, represent an additional hazard to ship operations that is less straightforward to account for in a consistent way. Obviously, there are large uncertainties as to how future climate change will affect the extreme weather conditions at sea and there is a need for stochastic models that can describe the variability in both space and time at various scales of the environmental conditions. Previously, Bayesian hierarchical space-time models have been developed to describe the variability and complex dependence structures of significant wave height in space and time. These models were found to perform reasonably well and provided some interesting results, in particular, pertaining to long-term trends in the wave climate. In this paper, a similar framework is applied to oceanic windiness and the spatial and temporal variability of the 10-m wind speed over an area in the North Atlantic ocean is investigated. When the results from the model for North Atlantic windiness is compared to the results for significant wave height over the same area, it is interesting to observe that whereas an increasing trend in significant wave height was identified, no statistically significant long-term trend was estimated in windiness. This may indicate that the increase in significant wave height is not due to an increase in locally generated wind waves, but rather to increased swell. This observation is also consistent with studies that have suggested a poleward shift of the main storm tracks.

Description: Sensitivities and uncertainties of modeled ground temperatures in mountain environments Geoscientific Model Development Discussions, 6, 791-840, 2013 Author(s): S. Gubler, S. Endrizzi, S. Gruber, and R. S. Purves Before operational use or for decision making, models must be validated, and the degree of trust in model outputs should be quantified. Often, model validation is performed at single locations due to the lack of spatially-distributed data. Since the analysis of parametric model uncertainties can be performed independently of observations, it is a suitable method to test the influence of environmental variability on model evaluation. In this study, the sensitivities and uncertainty of a physically-based mountain permafrost model are quantified within an artificial topography consisting of different elevations and exposures combined with six ground types characterized by their hydraulic properties. The analyses performed for all combinations of topographic factors and ground types allowed to quantify the variability of model sensitivity and uncertainty within mountain regions. We found that modeled snow duration considerably influences the mean annual ground temperature (MAGT). The melt-out day of snow (MD) is determined by processes determining snow accumulation and melting. Parameters such as the temperature and precipitation lapse rate and the snow correction factor have therefore a great impact on modeled MAGT. Ground albedo changes MAGT from 0.5 to 4°C in dependence of the elevation, the aspect and the ground type. South-exposed inclined locations are more sensitive to changes in ground albedo than north-exposed slopes since they receive more solar radiation. The sensitivity to ground albedo increases with decreasing elevation due to shorter snow cover. Snow albedo and other parameters determining the amount of reflected solar radiation are important, changing MAGT at different depths by more than 1°C. Parameters influencing the turbulent fluxes as the roughness length or the dew temperature are more sensitive at low elevation sites due to higher air temperatures and decreased solar radiation. Modeling the individual terms of the energy balance correctly is hence crucial in any physically-based permafrost model, and a separate evaluation of the energy fluxes could substantially improve the results of permafrost models. The sensitivity in the hydraulic properties change considerably for different ground types: rock or clay for instance are not sensitive while gravel or peat, accurate measurements of the hydraulic properties could significantly improve modeled ground temperatures. Further, the discretization of ground, snow and time have an impact on modeled MAGT that cannot be neglected (more than 1°C for several discretization parameters). We show that the temporal resolution should be at least one hour to ensure errors less than 0.2°C in modeled MAGT, and the uppermost ground layer should at most be 20 mm thick. Within the topographic setting, the total parametric output uncertainties expressed as the standard deviation of the Monte Carlo model simulations range from 0.1 to 0.5°C for clay, silt and rock, and from 0.1 to 0.8°C for peat, sand and gravel. These uncertainties are comparable to the variability of ground surface temperatures measured within 10 m × 10 m grids in Switzerland. The increased uncertainties for sand, peat and gravel is largely due to the high hydraulic conductivity.

Description: One-dimensional simulation of fire injection heights in contrasted meteorological scenarios with PRM and Meso-NH models Geoscientific Model Development Discussions, 6, 721-790, 2013 Author(s): S. Strada, S. R. Freitas, C. Mari, K. M. Longo, and R. Paugam Wild-fires release huge amounts of aerosol and hazardous trace gases in the atmosphere. The residence time and the dispersion of fire pollutants in the atmosphere can range from hours to days and from local to continental scales. These various scenarios highly depend on the injection height of smoke plumes. The altitude at which fire products are injected in the atmosphere is controlled by fire characteristics and meteorological conditions. Injection height however is still poorly accounted in chemistry transport models for which fires are sub-grid scale processes which need to be parametrised. Only recently, physically-based approaches for estimating the fire injection heights have been developed which consider both the convective updrafts induced by the release of fire sensible heat and the impact of background meteorological environment on the fire convection dynamics. In this work, two different models are used to simulate fire injection heights in contrasted meteorological scenarios: a Mediterranean arson fire and two Amazonian deforestation fires. A Eddy-Diffusivity/Mass-Flux approach, formerly developed to reproduce convective boundary layer in the non-hydrostatic meteorological model Meso-NH, is compared to the 1-D Plume Rise Model. For both models, radiosonde data and re-analyses from the European Center for Medium-Range Weather Forecasts (ECMWF) have been used as initial conditions to explore the sensitivity of the models responses to different meteorological forcings. The two models predict injection heights for the Mediterranean fire between 1.7 and 3.3 km with the Meso-NH/EDMF model systematically higher than the 1-D PRM model. Both models show a limited sensitivity to the meteorological forcings with a 20–30% difference in the injection height between radiosondes and ECMWF data for this case. Injection heights calculated for the two Amazonian fires ranges from 5 to 6.5 km for the 1-D PRM model and from 2 to 4 km for the Meso-NH/EDMF model. The difference of smoke plume heights between the two models can reach 3–4 km. A large difference is obtained for the windy-wet Amazonian fire by the 1-D PRM model with a injection height 1.5 km higher when ECMWF re-analyses are used compared to the run with the radiosonde forcing. For the Mediterranean case, both models forecast a plume injection height above the boundary layer, although there are evidences that this particular fire propagated near the surface, highlighting the current limitations of the two approaches.

Description: Real-time flood forecasting coupling different postprocessing techniques of precipitation forecast ensembles with a distributed hydrological model. The case study of may 2008 flood in western Piemonte, Italy Natural Hazards and Earth System Science, 13, 211-220, 2013 Author(s): D. Cane, S. Ghigo, D. Rabuffetti, and M. Milelli In this work, we compare the performance of an hydrological model when driven by probabilistic rain forecast derived from two different post-processing techniques. The region of interest is Piemonte, northwestern Italy, a complex orography area close to the Mediterranean Sea where the forecast are often a challenge for weather models. The May 2008 flood is here used as a case study, and the very dense weather station network allows us for a very good description of the event and initialization of the hydrological model. The ensemble probabilistic forecasts of the rainfall fields are obtained with the Bayesian model averaging, with the classical poor man ensemble approach and with a new technique, the Multimodel SuperEnsemble Dressing. In this case study, the meteo-hydrological chain initialized with the Multimodel SuperEnsemble Dressing is able to provide more valuable discharge ranges with respect to the one initialized with Bayesian model averaging multi-model.

Description: Thermal conductivity of snow measured by three independent methods and anisotropy considerations The Cryosphere, 7, 217-227, 2013 Author(s): F. Riche and M. Schneebeli The thermal conductivity of snow determines the temperature gradient, and by this, it has a direct effect on the rate of snow metamorphism. It is therefore a key property of snow. However, thermal conductivities measured with the transient needle probe and the steady-state, heat flux plate differ. In addition, the anisotropy of thermal conductivity plays an important role in the accuracy of thermal conductivity measurements. In this study, we investigated three independent methods to measure snow thermal conductivity and its anisotropy: a needle probe with a long heating time, a guarded heat flux plate, and direct numerical simulation at the microstructural level of the pore and ice structure. The three methods were applied to identical snow samples. We analyzed the consistency and the difference between these methods. As already shown in former studies, we observed a distinct difference between the anisotropy of thermal conductivity in small rounded grains and in depth hoar. Indeed, the anisotropy between vertical and horizontal thermal conductivity components ranges between 0.5–2. This can cause a difference in thermal conductivity measurements carried out with needle probes of up to –25 % to +25 % if the thermal conductivity is calculated only from a horizontally inserted needle probe. Based on our measurements and the comparison of the three methods studied here, the direct numerical simulation is the most reliable method, as the tensorial components of the thermal conductivity can be calculated and the corresponding microstructure is precisely known.

Description: Brief communication "Important role of the mid-tropospheric atmospheric circulation in the recent surface melt increase over the Greenland ice sheet" The Cryosphere, 7, 241-248, 2013 Author(s): X. Fettweis, E. Hanna, C. Lang, A. Belleflamme, M. Erpicum, and H. Gallée Since 2007, there has been a series of surface melt records over the Greenland ice sheet (GrIS), continuing the trend towards increased melt observed since the end of the 1990's. The last two decades are characterized by an increase of negative phases of the North Atlantic Oscillation (NAO) favouring warmer and drier summers than normal over GrIS. In this context, we use a circulation type classification based on daily 500 hPa geopotential height to evaluate the role of atmospheric dynamics in this surface melt acceleration for the last two decades. Due to the lack of direct observations, the interannual melt variability is gauged here by the summer (June–July–August) mean temperature from reanalyses at 700 hPa over Greenland; analogous atmospheric circulations in the past show that ~70% of the 1993–2012 warming at 700 hPa over Greenland has been driven by changes in the atmospheric flow frequencies. Indeed, the occurrence of anticyclones centred over the GrIS at the surface and at 500 hPa has doubled since the end of 1990's, which induces more frequent southerly warm air advection along the western Greenland coast and over the neighbouring Canadian Arctic Archipelago (CAA). These changes in the NAO modes explain also why no significant warming has been observed these last summers over Svalbard, where northerly atmospheric flows are twice as frequent as before. Therefore, the recent warmer summers over GrIS and CAA cannot be considered as a long-term climate warming but are more a consequence of NAO variability affecting atmospheric heat transport. Although no global model from the CMIP5 database projects subsequent significant changes in NAO through this century, we cannot exclude the possibility that the observed NAO changes are due to global warming.

Description: Restoring mass conservation to shallow ice flow models over complex terrain The Cryosphere, 7, 229-240, 2013 Author(s): A. H. Jarosch, C. G. Schoof, and F. S. Anslow Numerical simulation of glacier dynamics in mountainous regions using zero-order, shallow ice models is desirable for computational efficiency so as to allow broad coverage. However, these models present several difficulties when applied to complex terrain. One such problem arises where steep terrain can spuriously lead to large ice fluxes that remove more mass from a grid cell than it originally contains, leading to mass conservation being violated. This paper describes a vertically integrated, shallow ice model using a second-order flux-limiting spatial discretization scheme that enforces mass conservation. An exact solution to ice flow over a bedrock step is derived for a given mass balance forcing as a benchmark to evaluate the model performance in such a difficult setting. This benchmark should serve as a useful test for modellers interested in simulating glaciers over complex terrain.

Description: Representation of nucleation mode microphysics in global aerosol microphysics models Geoscientific Model Development Discussions, 6, 893-924, 2013 Author(s): Y. H. Lee, J. R. Pierce, and P. J. Adams In models, nucleation mode (1 nm 〈 D p 〈 10 nm) particle microphysics can be represented explicitly with aerosol microphysical processes or can be parameterized to obtain the growth and survival of nuclei to the model's lower size boundary. This study investigates how the representation of nucleation mode microphysics impacts aerosol number predictions in the TwO-Moment Aerosol Sectional (TOMAS) aerosol microphysics model running with the GISS GCM II-prime by varying its lowest diameter boundary: 1 nm, 3 nm, and 10 nm. The model with the 1 nm boundary simulates the nucleation mode particles with fully resolved microphysical processes, while the model with the 10 nm and 3 nm boundaries uses a nucleation mode dynamics parameterization to account for the growth of nucleated particles to 10 nm and 3 nm, respectively. We also investigate the impact of the time step for aerosol microphysical processes (a 10-min versus a 1-h time step) to aerosol number predictions in the TOMAS models with explicit dynamics for the nucleation mode particles (i.e. 3 nm and 1 nm boundary). The model with the explicit microphysics (i.e. 1 nm boundary) with the 10-min time step is used as a numerical benchmark simulation to estimate biases caused by varying the lower size cutoff and the time step. Different representations of the nucleation mode have a significant effect on the formation rate of particles larger than 10 nm from nucleated particles ( J 10 ) and the burdens and lifetimes of ultrafine mode (10 nm 〈 D p 〈 70 nm) particles but have less impact on the burdens and lifetimes of CCN-sized particles. The models using parameterized microphysics (i.e. 10 nm and 3 nm boundaries) result in higher J 10 and shorter coagulation lifetimes of ultrafine mode particles than the model with explicit dynamics (i.e. 1 nm boundary). The spatial distributions of CN10 ( D p 〉 10 nm) and CCN(0.2%) (i.e. CCN concentrations at 0.2% supersaturation) are moderately affected, especially CN10 predictions above ~ 700 hPa where nucleation contributes most strongly to CN10 concentrations. The lowermost layer CN10 is substantially improved with the 3 nm boundary (compared to 10 nm) in most areas. The overprediction in CN10 with the 3 nm and 10 nm boundaries can be explained by the overprediction of J 10 or J 3 with the parameterized microphysics possibly due to the instantaneous growth rate assumption in the survival and growth parameterization. The errors in CN10 predictions are sensitive to the choice of the lower size boundary but not to the choice of the time step applied to the microphysical processes. The spatial distribution of CCN(0.2%) with the 3 nm boundary is almost identical to that with the 1 nm boundary, but that with the 10 nm boundary can differ more than 10–40% in some areas. We found that the deviation in the 10 nm simulations is partly due to the longer time step (i.e. 1-h time step used in the 10 nm simulations compared to 10-min time step used in the benchmark simulations) but, even with the same time step, the 10 nm cutoff showed noticeably higher errors than the 3 nm cutoff. In conclusion, we generally recommend using a lower diameter boundary of 3 nm for studies focused on aerosol indirect effects but down to 1 nm boundary for studies focused on CN10 predictions or nucleation.

Description: Technical Note: Use of remote sensing for landslide studies in Europe Natural Hazards and Earth System Science, 13, 299-309, 2013 Author(s): V. Tofani, S. Segoni, A. Agostini, F. Catani, and N. Casagli Within the framework of FP7, an EU-funded SafeLand project, a questionnaire was prepared to collect information about the use of remote sensing for landslide study and to evaluate its actual application in landslide detection, mapping and monitoring. The questionnaire was designed using a Google form and was disseminated among end-users and researchers involved in landslide studies in Europe. In total, 49 answers from 17 different European countries were collected. The outcomes showed that landslide detection and mapping is mainly performed with aerial photos, often associated with optical and radar imagery. Concerning landslide monitoring, satellite radars prevail over the other types of data. Remote sensing is mainly used for detection/mapping and monitoring of slides, flows and lateral spreads with a preferably large scale of analysis (1:5000–1:25 000). All the compilers integrate remote sensing data with other thematic data, mainly geological maps, landslide inventory maps and DTMs and derived maps. According to the research and working experience of the compilers, remote sensing is generally considered to have a medium effectiveness/reliability for landslide studies. The results of the questionnaire can contribute to an overall sketch of the use of remote sensing in current landslide studies and show that remote sensing can be considered a powerful and well-established instrument for landslide mapping, monitoring and hazard analysis.

Description: Seismic risk assessment of architectural heritages in Gyeongju considering local site effects Natural Hazards and Earth System Science, 13, 251-262, 2013 Author(s): H.-J. Park, D.-S. Kim, and D.-M. Kim A seismic risk assessment is conducted for cultural heritage sites in Gyeongju, the capital of Korea's ancient Silla Kingdom. Gyeongju, home to UNESCO World Heritage sites, contains remarkable artifacts of Korean Buddhist art. An extensive geotechnical survey including a series of in situ tests is presented, providing pertinent soil profiles for site response analyses on thirty cultural heritage sites. After the shear wave velocity profiles and dynamic material properties were obtained, site response analyses were carried out at each historical site and the amplification characteristics, site period, and response spectrum of the site were determined for the earthquake levels of 2400 yr and 1000 yr return periods based on the Korean seismic hazard map. Response spectrum and corresponding site coefficients obtained from site response analyses considering geologic conditions differ significantly from the current Korean seismic code. This study confirms the importance of site-specific ground response analyses considering local geological conditions. Results are given in the form of the spatial distribution of bedrock depth, site period, and site amplification coefficients, which are particularly valuable in the context of a seismic vulnerability study. This study presents the potential amplification of hazard maps and provides primary data on the seismic risk assessment of each cultural heritage.

Description: Simulating future precipitation extremes in a complex Alpine catchment Natural Hazards and Earth System Science, 13, 263-277, 2013 Author(s): C. Dobler, G. Bürger, and J. Stötter The objectives of the present investigation are (i) to study the effects of climate change on precipitation extremes and (ii) to assess the uncertainty in the climate projections. The investigation is performed on the Lech catchment, located in the Northern Limestone Alps. In order to estimate the uncertainty in the climate projections, two statistical downscaling models as well as a number of global and regional climate models were considered. The downscaling models applied are the Expanded Downscaling (XDS) technique and the Long Ashton Research Station Weather Generator (LARS-WG). The XDS model, which is driven by analyzed or simulated large-scale synoptic fields, has been calibrated using ECMWF-interim reanalysis data and local station data. LARS-WG is controlled through stochastic parameters representing local precipitation variability, which are calibrated from station data only. Changes in precipitation mean and variability as simulated by climate models were then used to perturb the parameters of LARS-WG in order to generate climate change scenarios. In our study we use climate simulations based on the A1B emission scenario. The results show that both downscaling models perform well in reproducing observed precipitation extremes. In general, the results demonstrate that the projections are highly variable. The choice of both the GCM and the downscaling method are found to be essential sources of uncertainty. For spring and autumn, a slight tendency toward an increase in the intensity of future precipitation extremes is obtained, as a number of simulations show statistically significant increases in the intensity of 90th and 99th percentiles of precipitation on wet days as well as the 5- and 20-yr return values.

Description: Fuzzy approach to analysis of flood risk based on variable fuzzy sets and improved information diffusion methods Natural Hazards and Earth System Science, 13, 239-249, 2013 Author(s): Q. Li The predictive analysis of natural disasters and their consequences is challenging because of uncertainties and incomplete data. The present article studies the use of variable fuzzy sets (VFS) and improved information diffusion method (IIDM) to construct a composite method. The proposed method aims to integrate multiple factors and quantification of uncertainties within a consistent system for catastrophic risk assessment. The fuzzy methodology is proposed in the area of flood disaster risk assessment to improve probability estimation. The purpose of the current study is to establish a fuzzy model to evaluate flood risk with incomplete data sets. The results of the example indicate that the methodology is effective and practical; thus, it has the potential to forecast the flood risk in flood risk management.

Description: Review of unprecedented ULF electromagnetic anomalous emissions possibly related to the Wenchuan M S = 8.0 earthquake, on 12 May 2008 Natural Hazards and Earth System Science, 13, 279-286, 2013 Author(s): M. Li, J. Lu, M. Parrot, H. Tan, Y. Chang, X. Zhang, and Y. Wang This work presents ground based ultra low frequency (ULF) electromagnetic field measurements in the frequency range 0.1–10 Hz from January 2007 to December 2008. In this time period a strong earthquake series hits the Wenchuan region with a main shock of magnitude M S = 8.0 on 12 May 2008. The Hebei ULF electromagnetic observation network includes eight observation stations in north China and the observation system named E-EM is employed to record the electric potential difference between two electrodes with an analog automatic real-time continuous pen recorder. First, weak electric signals appeared on 11 October 2007 at Ningjin station, most of which are with relative long periods ~0.4–3 s and unequal amplitudes ~0.5–20 mm. Then, similar signals appeared at Gaobeidian station at the end of October. Abnormal behavior with various time intervals appeared randomly and not every day. At the beginning of April 2008, one and a half months before the Wenchuan M S = 8.0 earthquake, the anomalies were gradually subject to an intensive increase mainly in Gaobeidian SN direction and Ningjin EW direction. The abnormal behavior appeared almost every day and the amplitudes of electric signals, with short periods of ~0.1–0.3 s, enhanced to ~3–30 mm. Qingxian station started to record marginally high frequency signals in SN and EW components in the middle of April. On 9 May, 3 days before the main shock, the amplitude of high frequency information increased sharply at the same time in two components at Gaobeidian station and the maximum amplitude was up to 70 mm, i.e. 1.3 mV m −1 for the electric field. This situation did not stop until 17 May, 5 days after the main event. However, this kind of climax phenomena did not happen at Ningjin station and Qingxian station. Then weak anomalous information lasted about four months again, and strong signals appeared again for a short time before several powerful aftershocks. It is the first time that an abnormity with so large an amplitude and so long a duration time in the observation history of this network though several strong earthquakes were recorded. Furthermore, no obvious interferences have been found during this period. So this event is possibly related to this shock although all these three stations are more than 1300 km away from the Wenchuan earthquake epicenter.

Description: An optimally tuned ensemble of the "eb_go_gs" configuration of GENIE: parameter sensitivity and bifurcations in the Atlantic overturning circulation Geoscientific Model Development Discussions, 6, 925-956, 2013 Author(s): R. Marsh, A. Sóbester, E. E. Hart, K. I. C. Oliver, N. R. Edwards, and S. J. Cox The key physical parameters of the "eb_go_gs" configuration of GENIE, an Earth system Model of Intermediate Complexity (EMIC), are tuned using a multi-objective genetic algorithm. An ensemble of 90 parameter sets is tuned using two ocean and two atmospheric state variables as targets. These are "Pareto-optimal", representing a range of trade-offs between the four tuning targets. For the leading five parameter sets, simulations are further evaluated alongside a simulation with untuned "default" parameters, comparing selected variables and diagnostics that describe the state of the atmosphere, ocean and sea ice. One of these parameter sets is selected for further analysis of the objective function (error) landscape in the vicinity of its tuned values. "Cliffs" along some dimensions motivate closer inspection of corresponding variations in the Atlantic meridional overturning circulation (AMOC). This reveals that bifurcations in the AMOC are highly sensitive to parameters that are not commonly associated with MOC stability. Specifically, the state of the AMOC is sensitive to parameters governing the wind-driven circulation and atmospheric heat transport. Five optimal parameter sets are recommended for future use of GENIE in the configuration presented here.