ALBERT

Description: Review Article: On the relation between the seismic activity and the Hurst exponent of the geomagnetic field at the time of the 2000 Izu swarm Natural Hazards and Earth System Science, 13, 2189-2194, 2013 Author(s): F. Masci and J. N. Thomas Many papers document the observation of earthquake-related precursory signatures in geomagnetic field data. However, the significance of these findings is ambiguous because the authors did not adequately take into account that these signals could have been generated by other sources, and the seismogenic origin of these signals have not been validated by comparison with independent datasets. Thus, they are not reliable examples of magnetic disturbances induced by the seismic activity. Hayakawa et al. (2004) claim that at the time of the 2000 Izu swarm the Hurst exponent of the Ultra-Low-Frequency (ULF: 0.001–10 Hz) band of the geomagnetic field varied in accord with the energy released by the seismicity. The present paper demonstrates that the behaviour of the Hurst exponent was insufficiently investigated and also misinterpreted by the authors. We clearly show that during the Izu swarm the changes of the Hurst exponent were strongly related to the level of global geomagnetic activity and not to the increase of the local seismic activity.

Description: Forest fire danger rating in complex topography – results from a case study in the Bavarian Alps in autumn 2011 Natural Hazards and Earth System Science, 13, 2157-2167, 2013 Author(s): C. Schunk, C. Wastl, M. Leuchner, C. Schuster, and A. Menzel Forest fire danger rating based on sparse meteorological stations is known to be potentially misleading when assigned to larger areas of complex topography. This case study examines several fire danger indices based on data from two meteorological stations at different elevations during a major drought period. This drought was caused by a persistent high pressure system, inducing a pronounced temperature inversion and its associated thermal belt with much warmer, dryer conditions in intermediate elevations. Thus, a massive drying of fuels, leading to higher fire danger levels, and multiple fire occurrences at mid-slope positions were contrasted by moderate fire danger especially in the valleys. The ability of fire danger indices to resolve this situation was studied based on a comparison with the actual fire danger as determined from expert observations, fire occurrences and fuel moisture measurements. The results revealed that, during temperature inversion, differences in daily cycles of meteorological parameters influence fire danger and that these are not resolved by standard meteorological stations and fire danger indices (calculated on a once-a-day basis). Additional stations in higher locations or high-resolution meteorological models combined with fire danger indices accepting at least hourly input data may allow reasonable fire danger calculations under these circumstances.

Description: Preface "Landslide hazard and risk assessment at different scales" Natural Hazards and Earth System Science, 13, 2169-2171, 2013 Author(s): P. Reichenbach, A. Günther, and T. Glade

Description: Influence of microphysical schemes on atmospheric water in the Weather Research and Forecasting model Geoscientific Model Development Discussions, 6, 4563-4601, 2013 Author(s): F. Cossu and K. Hocke This study examines how different microphysical parameterization schemes influence orographically-induced precipitation and the distributions of hydrometeors and water vapour for mid-latitude summer conditions in the Weather Research and Forecasting (WRF) model. A high-resolution two-dimensional idealized simulation is used to assess the differences between the schemes in which a moist air flow is interacting with a bell-shaped 2 km high mountain. Periodic lateral boundary conditions are chosen to recirculate atmospheric water in the domain. It is found that the 13 selected microphysical schemes conserve the water in the model domain. The gain or loss of water is less than 0.81% over a simulation time interval of 61 days. The differences of the microphysical schemes in terms of the distributions of water vapour, hydrometeors and accumulated precipitation are presented and discussed. The Kessler scheme, the only scheme without ice-phase processes, shows final values of cloud liquid water 14 times greater than the other schemes. The differences among the other schemes are not as extreme, but still they differ up to 79% in water vapour, up to 10 times in hydrometeors and up to 64% in accumulated precipitation at the end of the simulation. The microphysical schemes also differ in the surface evaporation rate. The WRF single-moment 3-class scheme has the highest surface evaporation rate compensated by the highest precipitation rate. The different distributions of hydrometeors and water vapour of the microphysical schemes induce differences up to 49 W m −2 in the downwelling shortwave radiation and up to 33 W m −2 in the downwelling longwave radiation.

Description: Linking ICT and society in early warning and adaptation to hydrological extremes in mountains Natural Hazards and Earth System Science, 13, 2253-2270, 2013 Author(s): C. de Jong The assessment of the societal impact of hydrological extremes is particularly important in mountain regions, since mountains can be considered both as the generators and victims of extreme events. ICT can provide a powerful tool for transmitting hydro-meteorological information to predict, prepare and adapt to such events. However, in remote regions, such as mountains, the poles, deserts and islands, preventive and adaptive measures are often restricted by data availability and lack and/or incoherence of data networks. This paper distinguishes between early warning of floods and droughts, emphasising the latter in particular in mountains and explores the possibilities of enhancing the role of society in data collection, the identification, activation and application of stakeholder knowledge and transferral of data from gauged to ungauged catchments.

Description: The environmental impact of the Puyehue–Cordon Caulle 2011 volcanic eruption on Buenos Aires Natural Hazards and Earth System Science, 13, 2319-2330, 2013 Author(s): G. B. Raga, D. Baumgardner, A. G. Ulke, M. Torres Brizuela, and B. Kucienska On 4 June 2011, the volcanic complex Puyehue–Cordon Caulle located in the Chilean Andes erupted, producing a plume of gases and particles that eventually circled the Southern Hemisphere, disrupting air travel and depositing ash in large quantities. On eight occasions, the plume passed over the city of Buenos Aires, Argentina, leading local authorities to close the two international airports. The eruption occurred during an on-going field campaign when measurements of the properties of atmospheric aerosol particles were being made in Buenos Aires as part of a year-long study of the concentration and optical properties of aerosol at one site in the city. The suite of instruments deployed in Buenos Aires were not tailored to measurements of volcanic ash, but were designed to characterize urban conditions. Nevertheless, these measurements were analysed for periods when vertical profiles of aerosol backscatter, made with a ceilometer, clearly showed the presence of the volcano plume over the research site and resulted in airport closure. Aerosol optical thickness derived from AERONET, MODIS and a ceilometer at our research site, all show enhanced values clearly indicating that the three platforms identified the volcanic plume simultaneously. However, a quantitative comparison of the different estimates proves difficult, suggesting large spatial and temporal variability of the plume. Our results indicate that the number concentration of condensation nuclei (CN), the mass concentration of particle-bound polycyclic aromatic hydrocarbons (PPAH) and the light absorption coefficient exceeded the average background values by more than one standard deviation during the events of volcanic plume. The anomalous concentrations of CN suggest new particle formation, presumably from the conversion of SO 2 , while the anomalous concentrations of PPAH may come from the uptake of PAHs on the plume particles or from chemical reactions on the surface of plume particles. The anomalous absorption coefficients indicate that plume particles may contain certain compounds that can absorb radiation at 550 nm. Another possible explanation consistent with the observations is the scavenging of black carbon from urban sources as the plume descends through the boundary layer to the surface. In addition, the volcanic plume influenced the local meteorology resulting in a decrease of the temperature when compared to the average temperature during days with no plume present.

Description: Contribution of land use changes to future flood damage along the river Meuse in the Walloon region Natural Hazards and Earth System Science, 13, 2301-2318, 2013 Author(s): A. Beckers, B. Dewals, S. Erpicum, S. Dujardin, S. Detrembleur, J. Teller, M. Pirotton, and P. Archambeau Managing flood risk in Europe is a critical issue because climate change is expected to increase flood hazard in many european countries. Beside climate change, land use evolution is also a key factor influencing future flood risk. The core contribution of this paper is a new methodology to model residential land use evolution. Based on two climate scenarios ("dry" and "wet"), the method is applied to study the evolution of flood damage by 2100 along the river Meuse. Nine urbanization scenarios were developed: three of them assume a "current trend" land use evolution, leading to a significant urban sprawl, while six others assume a dense urban development, characterized by a higher density and a higher diversity of urban functions in the urbanized areas. Using damage curves, the damage estimation was performed by combining inundation maps for the present and future 100 yr flood with present and future land use maps and specific prices. According to the dry scenario, the flood discharge is expected not to increase. In this case, land use changes increase flood damages by 1–40%, to €334–462 million in 2100. In the wet scenario, the relative increase in flood damage is 540–630%, corresponding to total damages of €2.1–2.4 billion. In this extreme scenario, the influence of climate on the overall damage is 3–8 times higher than the effect of land use change. However, for seven municipalities along the river Meuse, these two factors have a comparable influence. Consequently, in the "wet" scenario and at the level of the whole Meuse valley in the Walloon region, careful spatial planning would reduce the increase in flood damage by no more than 11–23%; but, at the level of several municipalities, more sustainable spatial planning would reduce future flood damage to a much greater degree.

Description: Estimating soil suction from electrical resistivity Natural Hazards and Earth System Science, 13, 2369-2379, 2013 Author(s): E. Piegari and R. Di Maio Soil suction and resistivity strongly depend on the degree of soil saturation and, therefore, both are used for estimating water content variations. The main difference between them is that soil suction is measured using tensiometers, which give point information, while resistivity is obtained by tomography surveys, which provide distributions of resistivity values in large volumes, although with less accuracy. In this paper, we have related soil suction to electrical resistivity with the aim of obtaining information about soil suction changes in large volumes, and not only for small areas around soil suction probes. We derived analytical relationships between soil matric suction and electrical resistivity by combining the empirical laws of van Genuchten and Archie. The obtained relationships were used to evaluate maps of soil suction values in different ashy layers originating in the explosive activity of the Mt Somma-Vesuvius volcano (southern Italy). Our findings provided a further example of the high potential of geophysical methods in contributing to more effective monitoring of soil stress conditions; this is of primary importance in areas where rainfall-induced landslides occur periodically.

Description: Sulfur dioxide emissions from Papandayan and Bromo, two Indonesian volcanoes Natural Hazards and Earth System Science, 13, 2399-2407, 2013 Author(s): P. Bani, Surono, M. Hendrasto, H. Gunawan, and S. Primulyana Indonesia hosts 79 active volcanoes, representing 14% of all active volcanoes worldwide. However, little is known about their SO 2 contribution into the atmosphere, due to isolation and access difficulties. Existing SO 2 emission budgets for the Indonesian archipelago are based on extrapolations and inferences as there is a considerable lack of field assessments of degassing. Here, we present the first SO 2 flux measurements using differential optical absorption spectroscopy (DOAS) for Papandayan and Bromo, two of the most active volcanoes in Indonesia. Results indicate mean SO 2 emission rates of 1.4 t d −1 from the fumarolic activity of Papandayan and more than 22–32 t d −1 of SO 2 released by Bromo during a declining eruptive phase. These DOAS results are very encouraging and pave the way for a better evaluation of Indonesian volcanic emissions.

Description: Interviewing insights regarding the fatalities inflicted by the 2011 Great East Japan Earthquake Natural Hazards and Earth System Science, 13, 2173-2187, 2013 Author(s): M. Ando, M. Ishida, Y. Hayashi, C. Mizuki, Y. Nishikawa, and Y. Tu One hundred fifty survivors of the 11 March 2011 Great East Japan Earthquake (Tohoku-oki earthquake) ( M w = 9.0) were interviewed to study the causes of deaths from the associated tsunami in coastal areas of Tohoku. The first official tsunami warning underestimated the height of the tsunami and 40% of the interviewees did not obtain this warning due to immediate blackouts and a lack of communication after the earthquake. Many chose to remain in dangerous locations based on the underestimated warning and their experiences with previous smaller tsunamis and/or due to misunderstanding the mitigating effects of nearby breakwaters in blocking incoming tsunamis. Some delayed their evacuation to perform family safety checks, and in many situations, the people affected misunderstood the risks involved in tsunamis. In this area, three large tsunamis have struck in the 115 yr preceding the 2011 tsunami. These tsunamis remained in the collective memory of communities, and numerous measures against future tsunami damage, such as breakwaters and tsunami evacuation drills, had been implemented. Despite these preparedness efforts, approximately 18 500 deaths and cases of missing persons occurred. The death rate with the age of 65 and above was particularly high, four times higher than that with other age groups. These interviews indicate that deaths resulted from a variety of reasons, but if residents had taken immediate action after the major ground motion stopped, most residents might have been saved. Education about the science behind earthquakes and tsunamis could help save more lives in the future.

Description: AnaWEGE: a weather generator based on analogues of atmospheric circulation Geoscientific Model Development Discussions, 6, 4745-4774, 2013 Author(s): P. Yiou This paper presents a stochastic weather generator based on analogues of circulation (AnaWEGE). Analogues of circulation have been a promising paradigm to analyse climate variability and its extremes. The weather generator uses precomputed analogues of sea-level pressure over the North Atlantic. The stochastic rules of the generator constrain the continuity in time of the simulations. The generator then simulates spatially coherent time series of a climate variable, drawn from meteorological observations. The weather generator is tested for European temperatures, and for winter and summer seasons. The biases in temperature quantiles and autocorrelation are rather small compared to observed variability. The ability of simulating extremely hot summers and cold winters is also assessed.

Description: Methodological aspects of a pattern-scaling approach to produce global fields of monthly means of daily maximum and minimum temperature Geoscientific Model Development Discussions, 6, 4833-4882, 2013 Author(s): S. Kremser, G. E. Bodeker, and J. Lewis A Climate Pattern-Scaling Model (CPSM) that simulates global patterns of climate change, for a prescribed emissions scenario, is described. A CPSM works by quantitatively establishing the statistical relationship between a climate variable at a specific location (e.g. daily maximum surface temperature, T max ) and one or more predictor time series (e.g. global mean surface temperature, T global ) – referred to as the "training" of the CPSM. This training uses a regression model to derive fit-coefficients that describe the statistical relationship between the predictor time series and the target climate variable time series. Once that relationship has been determined, and given the predictor time series for any greenhouse gas (GHG) emissions scenario, the change in the climate variable of interest can be reconstructed – referred to as the "application" of the CPSM. The advantage of using a CPSM rather than a typical atmosphere-ocean global climate model (AOGCM) is that the predictor time series required by the CPSM can usually be generated quickly using a simple climate model (SCM) for any prescribed GHG emissions scenario and then applied to generate global fields of the climate variable of interest. The training can be performed either on historical measurements or on output from an AOGCM. Using model output from 21st century simulations has the advantage that the climate change signal is more pronounced than in historical data and therefore a more robust statistical relationship is obtained. The disadvantage of using AOGCM output is that the CPSM training might be compromised by any AOGCM inadequacies. For the purposes of exploring the various methodological aspects of the CPSM approach, AOGCM output was used in this study to train the CPSM. These investigations of the CPSM methodology focus on monthly mean fields of daily temperature extremes ( T max and T min ). Key conclusions are: (1) overall, the CPSM trained on simulations based on the Representative Concentration Pathway (RCP) 8.5 emissions scenario is able to reproduce AOGCM simulations of T max and T min based on predictor time series from an RCP 4.5 emissions scenario; (2) access to hemisphere average land and ocean temperatures as predictors improves the variance that can be explained, particularly over the oceans; (3) regression model fit-coefficients derived from individual simulations based on the RCP 2.6, 4.5 and 8.5 emissions scenarios agree well over most regions of the globe (the Arctic is the exception); (4) training the CPSM on concatenated time series from an ensemble of simulations does not result in fit-coefficients that explain significantly more of the variance than an approach that weights results based on single simulation fits; and (5) the inclusion of a linear time dependence in the regression model fit-coefficients improves the variance explained, primarily over the oceans.

Description: Modeling different freeze/thaw processes in heterogeneous landscapes of the Arctic polygonal tundra using an ecosystem model Geoscientific Model Development Discussions, 6, 4883-4932, 2013 Author(s): given_name prefix surname suffix, S. Yi, K. Wischnewski, M. Langer, S. Muster, and J. Boike Freeze/thaw (F/T) processes can be quite different under the various land surface types found in the heterogeneous polygonal tundra of the Arctic. Proper simulation of these different processes is essential for accurate prediction of the release of greenhouse gases under a warming climate scenario. In this study we have modified the dynamic organic soil version of the Terrestrial Ecosystem Model (DOS-TEM) to simulate F/T processes beneath the polygon rims, polygon centers (with and without water), and lakes that are common features in Arctic lowland regions. We first verified the F/T algorithm in the DOS-TEM against analytical solutions, and then compared the results with in situ measurements from Samoylov Island, Siberia. In the final stage, we examined the different responses of the F/T processes for different water levels at the various land surface types. The simulations revealed that (1) the DOS-TEM was very efficient and its results compared very well with analytical solutions for idealized cases, (2) the simulations compared reasonably well with in situ measurements although there were a number of model limitations and uncertainties, (3) the DOS-TEM was able to successfully simulate the differences in F/T dynamics under different land surface types, and (4) permafrost beneath water bodies was found to respond highly sensitive to changes in water depths between 1 and 2 m. Our results indicate that water is very important in the thermal processes simulated by the DOS-TEM; the heterogeneous nature of the landscape and different water depths therefore need to be taken into account when simulating methane emission responses to a warming climate.

Description: Review Article: Potential geomorphic consequences of a future great ( M w = 8.0+) Alpine Fault earthquake, South Island, New Zealand Natural Hazards and Earth System Science, 13, 2279-2299, 2013 Author(s): T. R. Robinson and T. R. H. Davies The Alpine Fault in New Zealand's South Island has not sustained a large magnitude earthquake since ca. AD 1717. The time since this rupture is close to the average inferred recurrence interval of the fault (~300 yr). The Alpine Fault is therefore expected to generate a large magnitude earthquake in the near future. Previous ruptures of this fault are inferred to have generated M w = 8.0 or greater earthquakes and to have resulted in, amongst other geomorphic hazards, large-scale landslides and landslide dams throughout the Southern Alps. There is currently 85% probability that the Alpine Fault will cause a M w = 8.0+ earthquake within the next 100 yr. While the seismic hazard is fairly well understood, that of the consequential geomorphic activity is less well studied, and these consequences are explored herein. They are expected to include landsliding, landslide damming, dam-break flooding, debris flows, river aggradation, liquefaction, and landslide-generated lake/fiord tsunami. Using evidence from previous events within New Zealand as well as analogous international examples, we develop first-order estimates of the likely magnitude and possible locations of the geomorphic effects associated with earthquakes. Landsliding is expected to affect an area 〉 30 000 km 2 and involve 〉 1billion m 3 of material. Some tens of landslide dams are expected to occur in narrow, steep-sided gorges in the affected region. Debris flows will be generated in the first long-duration rainfall after the earthquake and will continue to occur for several years as rainfall (re)mobilises landslide material. In total more than 1000 debris flows are likely to be generated at some time after the earthquake. Aggradation of up to 3 m will cover an area 〉 125 km 2 and is likely to occur on many West Coast alluvial fans and floodplains. The impact of these effects will be felt across the entire South Island and is likely to continue for several decades.

Description: A standard test case suite for two-dimensional linear transport on the sphere: results from a collection of state-of-the-art schemes Geoscientific Model Development Discussions, 6, 4983-5076, 2013 Author(s): P. H. Lauritzen, P. A. Ullrich, C. Jablonowski, P. A. Bosler, D. Calhoun, A. J. Conley, T. Enomoto, L. Dong, S. Dubey, O. Guba, A. B. Hansen, E. Kaas, J. Kent, J.-F. Lamarque, M. J. Prather, D. Reinert, V. V. Shashkin, W. C. Skamarock, B. Sørensen, M. A. Taylor, and M. A. Tolstykh Recently, a standard test case suite for 2-D linear transport on the sphere was proposed to assess important aspects of accuracy in geophysical fluid dynamics with a "minimal" set of idealized model configurations/runs/diagnostics. Here we present results from 19 state-of-the-art transport scheme formulations based on finite-difference/finite-volume methods as well as emerging (in the context of atmospheric/oceanographic sciences) Galerkin methods. Discretization grids range from traditional regular latitude-longitude grids to more isotropic domain discretizations such as icosahedral and cubed-sphere tessellations of the sphere. The schemes are evaluated using a wide range of diagnostics in idealized flow environments. Accuracy is assessed in single- and two-tracer configurations using conventional error norms as well as novel diagnostics designed for climate and climate-chemistry applications. In addition, algorithmic considerations that may be important for computational efficiency are reported on. The latter is inevitably computing platform dependent, The ensemble of results from a wide variety of schemes presented here helps shed light on the ability of the test case suite diagnostics and flow settings to discriminate between algorithms and provide insights into accuracy in the context of global atmospheric/ocean modeling. A library of benchmark results is provided to facilitate scheme intercomparison and model development. Simple software and data-sets are made available to facilitate the process of model evaluation and scheme intercomparison.

Description: On the analytic approximation of bulk collision rates of non-spherical hydrometeors Geoscientific Model Development Discussions, 6, 5077-5116, 2013 Author(s): A. Seifert, U. Blahak, and R. Buhr Analytic approximations of the binary collision rates of hydrometeors are derived for use in bulk microphysical parameterizations. Special attention is given to non-spherical hydrometeors like raindrops and snowflakes. The terminal fall velocity of these particles cannot be sufficiently well approximated by power law relations which are used in most microphysical parameterizations and therefore an improved formulation is needed. The analytic approximations of the bulk collision rates given in this paper are an alternative to look-up tables and can replace the Wisner approximation which is used in many atmospheric models.

Description: Integrating spatial, temporal, and size probabilities for the annual landslide hazard maps in the Shihmen watershed, Taiwan Natural Hazards and Earth System Science, 13, 2353-2367, 2013 Author(s): C. Y. Wu and S. C. Chen Landslide spatial, temporal, and size probabilities were used to perform a landslide hazard assessment in this study. Eleven intrinsic geomorphological, and two extrinsic rainfall factors were evaluated as landslide susceptibility related factors as they related to the success rate curves, landslide ratio plots, frequency distributions of landslide and non-landslide groups, as well as probability–probability plots. Data on landslides caused by Typhoon Aere in the Shihmen watershed were selected to train the susceptibility model. The landslide area probability, based on the power law relationship between the landslide area and a noncumulative number, was analyzed using the Pearson type 5 probability density function. The exceedance probabilities of rainfall with various recurrence intervals, including 2, 5, 10, 20, 50, 100 and 200 yr, were used to determine the temporal probabilities of the events. The study was conducted in the Shihmen watershed, which has an area of 760 km 2 and is one of the main water sources for northern Taiwan. The validation result of Typhoon Krosa demonstrated that this landslide hazard model could be used to predict the landslide probabilities. The results suggested that integration of spatial, area, and exceedance probabilities to estimate the annual probability of each slope unit is feasible. The advantage of this annual landslide probability model lies in its ability to estimate the annual landslide risk, instead of a scenario-based risk.

Description: On the puzzling feature of the silence of precursory electromagnetic emissions Natural Hazards and Earth System Science, 13, 2381-2397, 2013 Author(s): K. Eftaxias, S. M. Potirakis, and T. Chelidze It has been suggested that fracture-induced MHz–kHz electromagnetic emissions (EME), which emerge from a few days up to a few hours before the main seismic shock occurrence permit a real-time monitoring of the damage process during the last stages of earthquake preparation, as it happens at the laboratory scale. Despite fairly abundant evidence, electromagnetic (EM) precursors have not been adequately accepted as credible physical phenomena. These negative views are enhanced by the fact that certain "puzzling features" are repetitively observed in candidate fracture-induced pre-seismic EME. More precisely, EM silence in all frequency bands appears before the main seismic shock occurrence, as well as during the aftershock period. Actually, the view that "acceptance of "precursive" EM signals without convincing co-seismic signals should not be expected" seems to be reasonable. In this work we focus on this point. We examine whether the aforementioned features of EM silence are really puzzling ones or, instead, reflect well-documented characteristic features of the fracture process, in terms of universal structural patterns of the fracture process, recent laboratory experiments, numerical and theoretical studies of fracture dynamics, critical phenomena, percolation theory, and micromechanics of granular materials. Our analysis shows that these features should not be considered puzzling.

Description: Ensemble initialization of the oceanic component of a coupled model through bred vectors at seasonal-to-interannual time scales Geoscientific Model Development Discussions, 6, 5189-5214, 2013 Author(s): J. Baehr and R. Piontek We evaluate the ensemble spread at seasonal-to-interannual time scales for two perturbation techniques implemented into the ocean component of a coupled model: (1) lagged initial conditions as commonly used for decadal predictions, (2) bred vectors as commonly used for weather and seasonal forecasting. We show that relative to an uninitialized reference simulation the implementation for bred vectors can improve the ensemble spread compared to lagged initialization at time scales from one months up to three years. As bred vectors have so far mostly been used at short time scales, we initially focus on the implementation of the bred vectors into the ocean component. We introduce a depth-dependent vertical rescaling norm, accounting for the vertical dependence of the variability, and extending the commonly used upper-ocean rescaling norm to the full water column. We further show that it is sufficient for the (sub-surface) ocean to breed temperature and salinity (i.e., scalar quantities), and rely on the governing physics to carry the temperature and salinity perturbations to the flow field. Using these bred vectors with a rescaling interval of 12 months, we initialize hindcast simulations and compare them to hindcast simulations initialized with lagged initial conditions. We quantify the ensemble spread by analyzing Talagrand diagrams and spread-error ratios. For both temperature and salinity, the lagged initialized ensemble is particularly under-dispersive for the first few months of predictable lead time. The ensemble initialized with bred vectors improves the spread for temperature and salinity for the 0–700 m and 1000–3500 m means, compared to the lagged ensemble at lead times of several months to one year. As the lead time increases to years, the differences between the two ensemble initialization techniques becomes more difficult to discern. While the results need to be confirmed in an initialized framework, the present analysis represents a first step towards an improved ensemble generation at the transition from seasonal-to-interannual time scales, in particular at lead times up to one year.

Description: Understanding the performance of the FLake model over the African Great Lakes Geoscientific Model Development Discussions, 6, 5141-5187, 2013 Author(s): W. Thiery, A. Martynov, F. Darchambeau, J.-P. Descy, P.-D. Plisnier, L. Sushama, and N. P. M. van Lipzig The ability of the one-dimensional lake model FLake to represent the mixolimnion temperatures for tropical conditions was tested for three locations in East Africa: Lake Kivu, Lake Tanganyika's northern and southern basins. Meteorological observations from surrounding Automatic Weather Stations were corrected and used to drive FLake, whereas a comprehensive set of water temperature profiles served to evaluate the model at each site. Careful forcing data correction and model configuration allowed to reproduce the observed mixed layer seasonality at Lake Kivu and Lake Tanganyika (northern and southern basins), with correct representation of both the mixed layer depth and temperature structure. At Lake Kivu, mixolimnion temperatures predicted by FLake were found sensitive both to minimal variations in the external parameters (lake depth and water transparency) as to small changes in the meteorological driving data, in particular wind velocity. In each case, small modifications may already lead to a regime switch from the correctly represented seasonal mixed layer deepening to either completely mixed (down to the model lake bottom) or permanently stratified (from ~10 m downwards) conditions. In contrast, model temperatures are found robust close to the surface, with acceptable predictions of near-surface water temperatures even when the seasonal mixing regime is not reproduced. FLake can thus be a suitable tool to parameterize tropical lake water surface temperatures within atmospheric prediction models, but may be less appropriate, in its current form, to study complex limnological processes within tropical lakes. Furthermore, a study of different initial conditions showed that for tropical lakes lacking reliable initial data, a fully mixed, artificially warm initialisation is to be preferred, but only if the model is allowed to spin up until convergence is reached. Finally, FLake was used to attribute the seasonal mixing cycle at Lake Kivu to variations in the near-surface meteorological conditions. It was found that the annual mixing down to 60 m during the main dry season is primarily due to enhanced lake evaporation and secondarily due to the decreased incoming long wave radiation, both causing a significant heat loss from the lake surface and associated mixolimnion cooling.

Description: Early warning of snow-caused disasters in pastoral areas on the Tibetan Plateau Natural Hazards and Earth System Science, 13, 1411-1425, 2013 Author(s): W. Wang, T. Liang, X. Huang, Q. Feng, H. Xie, X. Liu, M. Chen, and X. Wang This study develops a model for early warning of snow-caused livestock disasters on a county basis and proposes a method of qualitative risk assessment of snow disasters at 500 m resolution for pastoral areas on the Tibetan Plateau (TP). Data used for the model development include remote sensing data, statistical data of weather, livestock, and social economy, and 45 typical snow disaster cases from 2000 to 2010. The principal component analysis (PCA) approach is used to choose 7 crucial factors that contribute over 85% of information for early warning snow disasters on the TP. They are mean annual probability of snow disaster, number of snow-covered days, livestock stocking rate, continual days of mean daily temperature below −10 °C, grassland burial index, rate of snow-covered grassland, and per livestock gross domestic product. The chosen 411 cases from 2008 to 2010 are used to validate the prediction results from the developed early warning model, with an overall accuracy of 85.64% in predicting snow disasters and no disasters. This suggests that the early warning approach developed in the study has operational potential for predicting snow disasters on the TP.

Description: How much does participatory flood management contribute to stakeholders' social capacity building? Empirical findings based on a triangulation of three evaluation approaches Natural Hazards and Earth System Science, 13, 1427-1444, 2013 Author(s): M. Buchecker, S. Menzel, and R. Home Recent literature suggests that dialogic forms of risk communication are more effective to build stakeholders' hazard-related social capacities. In spite of the high theoretical expectations, there is a lack of univocal empirical evidence on the relevance of these effects. This is mainly due to the methodological limitations of the existing evaluation approaches. In our paper we aim at eliciting the contribution of participatory river revitalisation projects on stakeholders' social capacity building by triangulating the findings of three evaluation studies that were based on different approaches: a field-experimental, a qualitative long-term ex-post and a cross-sectional household survey approach. The results revealed that social learning and avoiding the loss of trust were more relevant benefits of participatory flood management than acceptance building. The results suggest that stakeholder involvements should be more explicitly designed as tools for long-term social learning.

Description: Stakeholders' issues for action during the warning process and the interpretation of forecasts' uncertainties Natural Hazards and Earth System Science, 13, 1469-1479, 2013 Author(s): L. Créton-Cazanave and C. Lutoff This article considers the socio-geographical approach carried out as part of the MedUp program. It presents a study of the ways that the French "actors" manage forecast uncertainties during a flash flood warning process. In order to better understand the role of forecasts' uncertainties in decision making, we focused on the actions people took and how what they say explains their actions. The practices of actors involved in warnings for the Vidourle watershed (Gard, France), in particular, are analyzed using a practice-based approach. A set of categories of the "actors" was developed based on their descriptions of the problems they faced during the flash flood warning, independent of their socio-professional status and position in the warning chain. Five actor profiles result from this: Translators, Managers, Committed, Navigators and Vulnerable. For each profile, specific action contexts are defined, determining how each deals with uncertainty.

Description: Augmenting Austrian flood management practices through geospatial predictive analytics: a study in Carinthia Natural Hazards and Earth System Science, 13, 1445-1455, 2013 Author(s): S. M. Ward and G. Paulus The Danube River basin has long been the location of significant flooding problems across central Europe. The last decade has seen a sharp increase in the frequency, duration and intensity of these flood events, unveiling a dire need for enhanced flood management policy and tools in the region. Located in the southern portion of Austria, the state of Carinthia has experienced a significant volume of intense flood impacts over the last decade. Although the Austrian government has acknowledged these issues, their remedial actions have been primarily structural to date. Continued focus on controlling the natural environment through infrastructure while disregarding the need to consider alternative forms of assessing flood exposure will only act as a provisional solution to this inescapable risk. In an attempt to remedy this flaw, this paper highlights the application of geospatial predictive analytics and spatial recovery index as a proxy for community resilience, as well as the cultural challenges associated with the application of foreign models within an Austrian environment.

Description: CDRD and PNPR satellite passive microwave precipitation retrieval algorithms: EuroTRMM/EURAINSAT origins and H-SAF operations Natural Hazards and Earth System Science, 13, 887-912, 2013 Author(s): A. Mugnai, E. A. Smith, G. J. Tripoli, B. Bizzarri, D. Casella, S. Dietrich, F. Di Paola, G. Panegrossi, and P. Sanò Satellite Application Facility on Support to Operational Hydrology and Water Management (H-SAF) is a EUMETSAT (European Organisation for the Exploitation of Meteorological Satellites) program, designed to deliver satellite products of hydrological interest (precipitation, soil moisture and snow parameters) over the European and Mediterranean region to research and operations users worldwide. Six satellite precipitation algorithms and concomitant precipitation products are the responsibility of various agencies in Italy. Two of these algorithms have been designed for maximum accuracy by restricting their inputs to measurements from conical and cross-track scanning passive microwave (PMW) radiometers mounted on various low Earth orbiting satellites. They have been developed at the Italian National Research Council/Institute of Atmospheric Sciences and Climate in Rome (CNR/ISAC-Rome), and are providing operational retrievals of surface rain rate and its phase properties. Each of these algorithms is physically based, however, the first of these, referred to as the Cloud Dynamics and Radiation Database (CDRD) algorithm, uses a Bayesian-based solution solver, while the second, referred to as the PMW Neural-net Precipitation Retrieval (PNPR) algorithm, uses a neural network-based solution solver. Herein we first provide an overview of the two initial EU research and applications programs that motivated their initial development, EuroTRMM and EURAINSAT (European Satellite Rainfall Analysis and Monitoring at the Geostationary Scale), and the current H-SAF program that provides the framework for their operational use and continued development. We stress the relevance of the CDRD and PNPR algorithms and their precipitation products in helping secure the goals of H-SAF's scientific and operations agenda, the former helpful as a secondary calibration reference to other algorithms in H-SAF's complete mix of algorithms. Descriptions of the algorithms' designs are provided including a few examples of their performance. This aspect of the development of the two algorithms is placed in the context of what we refer to as the TRMM era, which is the era denoting the active and ongoing period of the Tropical Rainfall Measuring Mission (TRMM) that helped inspire their original development. In 2015, the ISAC-Rome precipitation algorithms will undergo a transformation beginning with the upcoming Global Precipitation Measurement (GPM) mission, particularly the GPM Core Satellite technologies. A few years afterward, the first pair of imaging and sounding Meteosat Third Generation (MTG) satellites will be launched, providing additional technological advances. Various of the opportunities presented by the GPM Core and MTG satellites for improving the current CDRD and PNPR precipitation retrieval algorithms, as well as extending their product capability, are discussed.

Description: The mid-Pliocene climate simulated by FGOALS-g2 Geoscientific Model Development Discussions, 6, 2403-2428, 2013 Author(s): W. Zheng, Z. Zhang, L. Chen, and Y. Yu Within the framework of Pliocene Model Intercomparison Project (PlioMIP), the mid-Pliocene (3.264–3.025 Ma) climate simulated by the Flexible Global Ocean-Atmosphere-Land System model grid-point version 2 (FGOALS-g2) are analyzed in this study. Results show that the model reproduces the large-scale features of the global warming over the land and ocean. The simulated mid-Pliocene global annual mean surface air temperature (TAS) and sea surface temperature (SST) are 4.17 and 2.62°C warmer than the pre-Industrial simulation, respectively. In particular, the feature of larger warming over mid-high latitudes is well captured. In the simulated warm mid-Pliocene climate, the Atlantic Meridional Overturning Circulation (AMOC) and El Niño-Southern Oscillation (ENSO) become weaker.

Description: The potential of an observational data set for calibration of a computationally expensive computer model Geoscientific Model Development Discussions, 6, 2369-2401, 2013 Author(s): D. J. McNeall, P. G. Challenor, J. R. Gattiker, and E. J. Stone We measure the potential of an observational data set to constrain a set of inputs to a complex and computationally expensive computer model. We use each member in turn of an ensemble of output from a computationally expensive model, corresponding to some observable part of a modelled system, as a proxy for an observational data set. We argue that our ability to constrain uncertain parameter inputs to a model using its own output as data, provides a maximum bound for our ability to constrain the model inputs using observations of the real system. The ensemble provides a set of known parameter input and model output pairs, which we use to build a computationally efficient statistical proxy for the full computer model, termed an emulator. We use the emulator to find and rule out ''implausible" values for the inputs of held-out ensemble members, given the computer model output. As we know the true values of the inputs for the ensemble, we can compare our constraint of the model inputs with the true value of the input for any ensemble member. Measures of the quality of constraint have the potential to inform strategy for data collection campaigns, before any real-world data is collected, as well as acting as an effective sensitivity analysis. We use an ensemble of the ice sheet model Glimmer to demonstrate our measures of quality of constraint. The ensemble has 250 model runs with 5 uncertain input parameters, and an output variable representing the pattern of the thickness of ice over Greenland. We have an observation of historical ice sheet thickness that directly matches the output variable, and offers an opportunity to constrain the model. We show that different ways of summarising our output variable (ice volume, ice surface area and maximum ice thickness) offer different potential constraints on individual input parameters. We show that combining the observational data gives increased power to constrain the model. We investigate the impact of uncertainty in observations or in model biases on our measures, showing that even a modest uncertainty can seriously degrade the potential of the observational data to constrain the model.

Description: On searching for optimized set of physical parameterization schemes in a multi-physics land surface process model Geoscientific Model Development Discussions, 6, 4511-4530, 2013 Author(s): S. Hong, X. Yu, S. K. Park, Y.-S. Choi, and B. Myoung Optimization of land surface models has been very challenging due to the increasing complexity of such models. Typical parameter calibration techniques often limit the solution of the spatiotemporal discrepancy in the modeling performance levels especially for regional applications. Thus, in this study, an attempt was made to perform scheme-based model optimization by designing a framework for coupling a micro-genetic algorithm (micro-GA) with the Noah land surface model that has multiple physics options (Noah-MP). Micro-GA controls the scheme selections in 10 different land surface parameterization fields in Noah-MP in order to extract the optimal scheme combination for a certain region. This coupling framework was successfully applied to the optimization of the surface water partitioning in the Korean Peninsula, promising not only the effectiveness of the scheme-based optimization but also model diagnosis capability by exploring the scheme sensitivity during the micro-GA evolution process. Then, the method was applied to four different regions in East Asia that have different climatic characteristics. The results indicate that (1) the optimal scheme combinations vary with the regions, (2) schemes related to the surface water partitioning are important for the modeling accuracy, and (3) specialized post-parameter optimization for each region may be required.

Description: Atmospheric inverse modeling with known physical bounds: an example from trace gas emissions Geoscientific Model Development Discussions, 6, 4531-4562, 2013 Author(s): S. M. Miller, A. M. Michalak, and P. J. Levi Many inverse problems in the atmospheric sciences involve parameters with known physical constraints. Examples include non-negativity (e.g., emissions of some urban air pollutants) or upward limits implied by reaction or solubility constants. However, probabilistic inverse modeling approaches based on Gaussian assumptions cannot incorporate such bounds and thus often produce unrealistic results. The atmospheric literature lacks consensus on the best means to overcome this problem, and existing atmospheric studies rely on a limited number of the possible methods with little examination of the relative merits of each. This paper investigates the applicability of several approaches to bounded inverse problems and is also the first application of Markov chain Monte Carlo (MCMC) to estimation of atmospheric trace gas fluxes. The approaches discussed here are broadly applicable. A common method of data transformations is found to unrealistically skew estimates for the examined example application. The method of Lagrange multipliers and two MCMC methods yield more realistic and accurate results. In general, the examined MCMC approaches produce the most realistic result but can require substantial computational time. Lagrange multipliers offer an appealing alternative for large, computationally intensive problems when exact uncertainty bounds are less central to the analysis. A synthetic data inversion of US anthropogenic methane emissions illustrates the strengths and weaknesses of each approach.

Description: A database and tool for boundary conditions for regional air quality modeling: description and evaluation Geoscientific Model Development Discussions, 6, 4665-4704, 2013 Author(s): B. H. Henderson, F. Akhtar, H. O. T. Pye, S. L. Napelenok, and W. T. Hutzell Transported air pollutants receive increasing attention as regulations tighten and global concentrations increase. The need to represent international transport in regional air quality assessments requires improved representation of boundary concentrations. Currently available observations are too sparse vertically to provide boundary information, particularly for ozone precursors, but global simulations can be used to generate spatially and temporally varying Lateral Boundary Conditions (LBC). This study presents a public database of global simulations designed and evaluated for use as LBC for air quality models (AQMs). The database covers the contiguous United States (CONUS) for the years 2000–2010 and contains hourly varying concentrations of ozone, aerosols, and their precursors. The database is complimented by a tool for configuring the global results as inputs to regional scale models (e.g., Community Multiscale Air Quality or Comprehensive Air quality Model with extensions). This study also presents an example application based on the CONUS domain, which is evaluated against satellite retrieved ozone vertical profiles. The results show performance is largely within uncertainty estimates for the Tropospheric Emission Spectrometer (TES) with some exceptions. The major difference shows a high bias in the upper troposphere along the southern boundary in January. This publication documents the global simulation database, the tool for conversion to LBC, and the fidelity of concentrations on the boundaries. This documentation is intended to support applications that require representation of long-range transport of air pollutants.

Description: Effects of vegetation structure on biomass accumulation in a Balanced Optimality Structure Vegetation Model (BOSVM v1.0) Geoscientific Model Development Discussions, 6, 4603-4663, 2013 Author(s): Z. Yin, S. C. Dekker, B. J. J. M. van den Hurk, and H. A. Dijkstra A myriad of interactions exist between vegetation and local climate for arid and semi-arid regions. Vegetation function, structure and individual behavior have large impacts on carbon-water-energy balances, which consequently influence local climate variability that, in turn, feeds back to the vegetation. In this study, a conceptual vegetation structure scheme is formulated and tested in a new carbon-water-energy coupled model to explore the importance of vegetation structure and vegetation adaptation to water stress on equilibrium biomass states. Surface energy, water and carbon fluxes are simulated for a range of vegetation structures across a precipitation gradient in West Africa and optimal vegetation structures that maximizes biomass for each precipitation regime are determined. Two different strategies of vegetation adaptation to water stress are included. Under dry conditions vegetation tries to maximize the Water Use Efficiency and Leaf Area Index as it tries to maximize carbon gain. However, an important negative feedback mechanism is found as the vegetation also tries to minimize its cover to optimize the surrounding bare ground area from which water can be extracted, thereby forming patches of vertical vegetation. Under larger precipitation, a positive feedback mechanism is found in which vegetation tries to maximize its cover as it then can reduce water loss from bare soil while having maximum carbon gain due to a large Leaf Area Index. The competition between vegetation and bare soil determines a transition between a "survival" state to a "growing" state.

Description: Influence of management of variables, sampling zones and land units on LR analysis for landslide spatial prevision Natural Hazards and Earth System Science, 13, 2209-2221, 2013 Author(s): R. Greco and M. Sorriso-Valvo Several authors, according to different methodological approaches, have employed logistic Regression (LR), a multivariate statistical analysis adopted to assess the spatial probability of landslide, even though its fundamental principles have remained unaltered. This study aims at assessing the influence of some of these methodological approaches on the performance of LR, through a series of sensitivity analyses developed over a test area of about 300 km 2 in Calabria (southern Italy). In particular, four types of sampling (1 – the whole study area; 2 – transects running parallel to the general slope direction of the study area with a total surface of about 1/3 of the whole study area; 3 – buffers surrounding the phenomena with a 1/1 ratio between the stable and the unstable area; 4 – buffers surrounding the phenomena with a 1/2 ratio between the stable and the unstable area), two variable coding modes (1 – grouped variables; 2 – binary variables), and two types of elementary land (1 – cells units; 2 – slope units) units have been tested. The obtained results must be considered as statistically relevant in all cases (Aroc values 〉 70%), thus confirming the soundness of the LR analysis which maintains high predictive capacities notwithstanding the features of input data. As for the area under investigation, the best performing methodological choices are the following: (i) transects produced the best results (0 〈 P(y) ≤ 93.4%; Aroc = 79.5%); (ii) as for sampling modalities, binary variables (0 〈 P(y) ≤ 98.3%; Aroc = 80.7%) provide better performance than ordinated variables; (iii) as for the choice of elementary land units, slope units (0 〈 P(y) ≤ 100%; Aroc = 84.2%) have obtained better results than cells matrix.

Description: Risk evolution: how can changes in the built environment influence the potential loss of natural hazards? Natural Hazards and Earth System Science, 13, 2195-2207, 2013 Author(s): B. Schwendtner, M. Papathoma-Köhle, and T. Glade Alpine areas often suffer significant loss and damage due to a range of natural processes such as landslides, debris flows, snow avalanches or floods. Sealing of the soil surface, settling in endangered areas and enhanced human intervention in the natural settings, as well as socio-economic changes, increase the risk and susceptibility of built environments to natural hazards and the costs of the consequences in a spatio-temporal context. The present study examines the loss estimation of a particular debris flow event for different points in time. The event occurred in August 1987, affected the municipality Martell in South Tyrol, Italy, and resulted in a total cost of € 25 million. The approach presented in this paper focuses on the changes of the land use and settlement expansion in the area since 1954 and attempts to assess the monetary impact of a similar event, which could have happened before (1954, 1985) or following the actual event (1992, 1999, 2006). The method applied is based on the use of a vulnerability curve which was developed for the specific area, based on the documentation of the damage of the 1987 event. Based on this curve, a loss estimation was carried out in order to visualise the risk evolution in a period of 52 yr (1954 to 2006). The results show a significant increase in the extent of the built environment (number, size and value of buildings) which consequently reflect an increase of the potential overall loss through the years. The method can be used in order to assess the potential loss for future scenarios based on different spatial patterns of the built environment.

Description: Wind shear over the Nice Côte d'Azur airport: case studies Natural Hazards and Earth System Science, 13, 2223-2238, 2013 Author(s): A. Boilley and J.-F. Mahfouf The Nice Côte d'Azur international airport is subject to horizontal low-level wind shears. Detecting and predicting these hazards is a major concern for aircraft security. A measurement campaign took place over the Nice airport in 2009 including 4 anemometers, 1 wind lidar and 1 wind profiler. Two wind shear events were observed during this measurement campaign. Numerical simulations were carried out with Meso-NH in a configuration compatible with near-real time applications to determine the ability of the numerical model to predict these events and to study the meteorological situations generating an horizontal wind shear. A comparison between numerical simulation and the observation dataset is conducted in this paper.

Description: A distributed computing approach to improve the performance of the Parallel Ocean Program (v2.1) Geoscientific Model Development Discussions, 6, 4705-4744, 2013 Author(s): B. van Werkhoven, J. Maassen, M. Kliphuis, H. A. Dijkstra, S. E. Brunnabend, M. van Meersbergen, F. J. Seinstra, and H. E. Bal The Parallel Ocean Program (POP) is used in many strongly eddying ocean circulation simulations. Ideally one would like to do thousand-year long simulations, but the current performance of POP prohibits this type of simulations. In this work, using a new distributed computing approach, two innovations to improve the performance of POP are presented. The first is a new block partitioning scheme for the optimization of the load balancing of POP such that it can be run efficiently in a multi-platform setting. The second is an implementation of part of the POP model code on Graphics Processing Units. We show that the combination of both innovations leads to a substantial performance increase also when running POP simultaneously over multiple computational platforms.

Description: Explosive development of winter storm Xynthia over the subtropical North Atlantic Ocean Natural Hazards and Earth System Science, 13, 2239-2251, 2013 Author(s): M. L. R. Liberato, J. G. Pinto, R. M. Trigo, P. Ludwig, P. Ordóñez, D. Yuen, and I. F. Trigo In winter of 2009–2010 south-western Europe was hit by several destructive windstorms. The most important was Xynthia (26–28 February 2010), which caused 64 reported casualties and was classified as the 2nd most expensive natural hazard event for 2010 in terms of economic losses. In this work we assess the synoptic evolution, dynamical characteristics and the main impacts of storm Xynthia, whose genesis, development and path were very uncommon. Wind speed gusts observed at more than 500 stations across Europe are evaluated as well as the wind gust field obtained with a regional climate model simulation for the entire North Atlantic and European area. Storm Xynthia was first identified on 25 February around 30° N, 50° W over the subtropical North Atlantic Ocean. Its genesis occurred on a region characterized by warm and moist air under the influence of a strong upper level wave embedded in the westerlies. Xynthia followed an unusual SW–NE path towards Iberia, France and central Europe. The role of moist air masses on the explosive development of Xynthia is analysed by considering the evaporative sources. A lagrangian model is used to identify the moisture sources, sinks and moisture transport associated with the cyclone during its development phase. The main supply of moisture is located over an elongated region of the subtropical North Atlantic Ocean with anomalously high SST, confirming that the explosive development of storm Xynthia had a significant contribution from the subtropics.

Description: Inherently mass-conservative version of the semi-Lagrangian Absolute Vorticity (SL-AV) atmospheric model dynamical core Geoscientific Model Development Discussions, 6, 4809-4832, 2013 Author(s): V. V. Shashkin and M. A. Tolstykh The semi-Lagrangian Absolute Vorticity (SL-AV) atmospheric model is the global semi-Lagrangian hydrostatic model used for operational medium-range and seasonal forecasts at Hydrometeorological centre of Russia. The distinct feature of SL-AV dynamical core is the semi-implicit semi-Lagrangian vorticity-divergence formulation on the unstaggered grid. Semi-implicit semi-Lagrangian approach allows for long time steps while violates the global and local mass-conservation. In particular, the total mass in simulations with semi-Lagrangian models can drift significantly if no aposteriori mass-fixing algorithms are applied. However, the global mass-fixing algorithms degrade the local mass conservation. The inherently mass-conservative version of SL-AV model dynamical core presented in the article ensures global and local mass conservation without mass-fixing algorithms. The mass conservation is achieved with the introduction of the finite-volume semi-Lagrangian discretization for continuity equation based on the 3-D extension of the conservative cascade semi-Lagrangian transport scheme (CCS). The numerical experiments show that the presented new version of SL-AV dynamical core combines the accuracy and stability of the standard SL-AV dynamical core with the mass-conservation properties. The results of the mountain induced Rossby wave test and baroclinic instability test for mass-conservative dynamical core are found to be in agreement with the results available in literature.

Description: A fast input/output library for high resolution climate models Geoscientific Model Development Discussions, 6, 4775-4807, 2013 Author(s): X. Huang, W. Wang, H. Fu, G. Yang, B. Wang, and C. Zhang We describe the design and implementation of Climate Fast Input/Output (CFIO), a fast input/output (I/O) library for high resolution climate models. CFIO provides a simple method for modelers to overlap the I/O phase with the computing phase automatically, so as to shorten the running time of numerical simulations. To minimize the code modifications required for porting, CFIO provides similar interfaces and features to Parallel network Common Data Form (PnetCDF), which is one of the most widely used I/O libraries in climate models. We deployed CFIO in three high resolution climate models, including two ocean models (POP and LICOM) and one sea ice model (CICE). The experimental results show that CFIO improves the performance of climate models significantly versus the original serial I/O approach. When running with CFIO at 0.1° resolution with about 1000 CPU cores, we managed to reduce the running time by factors of 7.9, 4.6 and 2.0 for POP, CICE, and LICOM respectively. We also compared the performance of CFIO against PnetCDF in different scenarios. For scenarios with both data output operations and computations, CFIO decreases the I/O overhead by a factor of 5.1 compared to PnetCDF.

Description: Seismic behavior of buried pipelines constructed by design criteria and construction specifications of both Korea and the US Natural Hazards and Earth System Science, 13, 2271-2278, 2013 Author(s): S.-S. Jeon Earthquake loss estimation systems in the US, for example HAZUS (Hazard in US), have been established based on sufficient damage records for the purpose of prevention and efficient response to earthquake hazards; however, in Korea, insufficient data sets of earthquakes and damage records are currently available. In this study, the earthquake damages to pipelines in Korea using the pipeline repair rate (RR) recommended in HAZUS was reevaluated with the degree of confidence when RR is used without modification for the damage estimation of pipelines in Korea. The numerical analyses using a commercial finite element model, ABAQUS, were carried out to compare stresses and strains mobilized in both brittle and ductile pipelines constructed by the design criteria and construction specifications of both Korea and the US. These pipelines were embedded in dense sand overlying three different in situ soils (clay, sand, and gravel) subjected to earthquake excitations with peak ground accelerations (PGAs) of 0.2 to 1.2 g and 1994 Northridge and 1999 Chi-Chi earthquake loadings. The numerical results show that differences in the stress and strain rates are less than 10%. This implies that RR in HAZUS can be used for earthquake damage estimation of pipelines with a 90% confidence level in Korea.

Description: Application and evaluation of McICA scheme with new radiation code in BCC_AGCM2.0.1 Geoscientific Model Development Discussions, 6, 4933-4982, 2013 Author(s): given_name prefix surname suffix, H. Zhang, X. Jing, and J. Li This research incorporates the Monte Carlo Independent Column Approximation (McICA) scheme with the correlated k-distribution BCC-RAD radiation model into the climate model BCC_AGCM2.0.1 and examines the impacts on modeled climate through several simulations with variations in cloud structures. Results from experiments with consistent sub-grid cloud structures show that both clear-sky radiation fluxes and cloud radiative forcings (CRFs) calculated by the new scheme are mostly improved relative to those calculated from the original one. The modeled atmospheric temperature and specific humidity are also improved due to changes in the radiative heating rates. The vertical overlap of fractional clouds and horizontal distribution of cloud condensation are important for computing CRFs. The maximum changes in seasonal CRF using the general overlap assumption (GenO) with different decorrelation depths ( L cf ) are larger than 10 and 20 Wm 2 for longwave (LW) CRF and shortwave (SW) CRF, respectively, mostly located in the Tropics and mid-latitude storm tracks. Larger (smaller) L cf in the Tropics (mid-latitude storm tracks) yield better cloud fraction and CRF compared with observations. The inclusion of an observation-based horizontal inhomogeneity of cloud condensation has a distinct impact on LW CRF and SW CRF, with global means of ∼1.2 Wm −2 and ∼3.7 Wm −2 at the top of atmosphere, respectively, making these much closer to observations. These results prove the reliability of the new model configuration to be used in BCC_AGCM2.0.1 for climate simulations, and also indicate that more detailed real-world information on cloud structures should be obtained to constrain cloud settings in McICA in the future.

Description: Seismic zones for Azores based on statistical criteria Natural Hazards and Earth System Science, 13, 2337-2351, 2013 Author(s): M. C. M. Rodrigues and C. S. Oliveira The objective of this paper is to define seismic zones in the Azores based on statistical criteria. These seismic zones will likely be used in seismic simulations of occurrences in the Azores Archipelago. The data used in this work cover the time period from 1915 to 2011. The Azores region was divided into 1° × 1° area units, for which the seismicity and the maximum magnitudes of events were calculated. The seismicity, the largest earthquakes recorded and the geological characteristics of the region were used to group these area units because similar seismic zones must delineate areas with homogeneous seismic characteristics. We have identified seven seismic zones. To verify that the defined areas differ statistically, we considered the following dissimilarity measures (variables): time, size and seismic conditions – the number of seismic events with specific characteristics. Statistical tests, particularly goodness-of-fit tests, allowed us to conclude that, considering these three variables, the seven earthquake zones defined here are statistically distinct.

Description: Sub-ionospheric very low frequency perturbations associated with the 12 May 2008 M = 7.9 Wenchuan earthquake Natural Hazards and Earth System Science, 13, 2331-2336, 2013 Author(s): A. K. Maurya, R. Singh, B. Veenadhari, S. Kumar, and A. K. Singh The present study reports the VLF (very low frequency) sub-ionospheric perturbations observed on transmitter JJI (22.1 kHz), Japan, received at the Indian low-latitude station, Allahabad ( geographic lat. 25.41° N, long 81.93° E), due to Wenchuan earthquake (EQ) that occurred on 12 May 2008 with the magnitude 7.9 and at the depth of 19 km in Sichuan province of Southwest China, located at 31.0° N, 103.4° E. The nighttime amplitude fluctuation analysis gives a significant increase in fluctuation and dispersion two days before EQ, when it crosses 2σ criterion. However, there was no significant change observed in the amplitude trend. The diurnal amplitude variation shows a significant increase in the amplitude of JJI signal on 11 and 12 May 2008. The gravity wave channel and changes in the electric field associated with this EQ seem to be the potential factors of the observed nighttime amplitude fluctuation, dispersion, and significant increase in the signal strength.

Description: Extreme extension across Seram and Ambon, eastern Indonesia: evidence for Banda slab rollback Solid Earth, 4, 277-314, 2013 Author(s): J. M. Pownall, R. Hall, and I. M. Watkinson The island of Seram, which lies in the northern part of the 180°-curved Banda Arc, has previously been interpreted as a fold-and-thrust belt formed during arc-continent collision, which incorporates ophiolites intruded by granites thought to have been produced by anatexis within a metamorphic sole. However, new geological mapping and a re-examination of the field relations cause us to question this model. We instead propose that there is evidence for recent and rapid N–S extension that has caused the high-temperature exhumation of lherzolites beneath low-angle lithospheric detachment faults that induced high-temperature metamorphism and melting in overlying crustal rocks. These "Kobipoto Complex" migmatites include highly residual Al–Mg-rich garnet + cordierite + sillimanite + spinel + corundum granulites (exposed in the Kobipoto Mountains) which contain coexisting spinel + quartz, indicating that peak metamorphic temperatures likely approached 900 °C. Associated with these residual granulites are voluminous Mio-Pliocene granitic diatexites, or "cordierite granites", which crop out on Ambon, western Seram, and in the Kobipoto Mountains and incorporate abundant schlieren of spinel- and sillimanite-bearing residuum. Quaternary "ambonites" (cordierite + garnet dacites) emplaced on Ambon were also evidently sourced from the Kobipoto Complex migmatites as demonstrated by granulite-inherited xenoliths. Exhumation of the hot peridotites and granulite-facies Kobipoto Complex migmatites to shallower structural levels caused greenschist- to lower-amphibolite facies metapelites and amphibolites of the Tehoru Formation to be overprinted by sillimanite-grade metamorphism, migmatisation, and limited localised anatexis to form the Taunusa Complex. The extreme extension required to have driven Kobipoto Complex exhumation evidently occurred throughout Seram and along much of the northern Banda Arc. The lherzolites must have been juxtaposed against the crust at typical lithospheric mantle temperatures in order to account for such high-temperature metamorphism and therefore could not have been part of a cooled ophiolite. In central Seram, lenses of peridotites are incorporated with a major left-lateral strike-slip shear zone (the "Kawa Shear Zone"), demonstrating that strike-slip motions likely initiated shortly after the mantle had been partly exhumed by detachment faulting and that the main strike-slip faults may themselves be reactivated and steepened low-angle detachments. The geodynamic driver for mantle exhumation along the detachment faults and strike-slip faulting in central Seram is very likely the same; we interpret the extreme extension to be the result of eastward slab rollback into the Banda Embayment as outlined by the latest plate reconstructions for Banda Arc evolution.

Description: A regional climate modelling projection ensemble experiment – NARCliM Geoscientific Model Development Discussions, 6, 5117-5139, 2013 Author(s): J. P. Evans, F. Ji, C. Lee, P. Smith, D. Argüeso, and L. Fita Including the impacts of climate change in decision making and planning processes is a challenge facing many regional governments including the New South Wales (NSW) and Australian Capital Territory (ACT) governments in Australia. NARCliM (NSW/ACT Regional Climate Modelling project) is a regional climate modelling project that aims to provide a comprehensive and consistent set of climate projections that can be used by all relevant government departments when considering climate change. To maximise end user engagement and ensure outputs are relevant to the planning process, a series of stakeholder workshops were run to define key aspects of the model experiment including spatial resolution, time slices, and output variables. As with all such experiments, practical considerations limit the number of ensembles members that can be simulated such that choices must be made concerning which Global Climate Models (GCMs) to downscale from, and which Regional Climate Models (RCMs) to downscale with. Here a methodology for making these choices is proposed that aims to sample the uncertainty in both GCMs and RCMs, as well as spanning the range of future climate projections present in the full GCM ensemble. The created ensemble provides a more robust view of future regional climate changes.

Description: Efficient performance of the Met Office Unified Model v8.2 on Intel Xeon partially used nodes Geoscientific Model Development Discussions, 7, 7395-7425, 2014 Author(s): I. Bermous The atmospheric Unified Model (UM) developed at the UK Met Office is used for weather and climate prediction by forecast teams at a number of international meteorological centres and research institutes on a wide variety of hardware and software environments. Over its 25 year history the UM sources have been optimised for a better application performance on a number of HPC systems including NEC SX vector architecture systems and recently the IBM Power6/Power7 platforms. Understanding the influence of the compiler flags, MPI libraries and run configurations is crucial to achieving the shortest elapsed times for a UM application on any particular HPC system. These aspects are very important for applications that must run within operational time frames. Driving the current study is the HPC industry trend since 1980 for processor arithmetic performance to increase at a faster rate than memory bandwidth. This gap has been growing especially fast for multicore processors in the past 10 years and it can have significant implication for the performance and performance scaling of memory bandwidth intensive applications, such as the UM. Analysis of partially used nodes on Intel Xeon clusters is provided in this paper for short and medium range weather forecasting systems using global and limited-area configurations. It is shown that on the Intel Xeon based clusters the fastest elapsed times and the most efficient system usage can be achieved using partially committed nodes.

Description: Changes in soil organic carbon and nitrogen capacities of Salix cheilophila Schneid along a revegetation chronosequence in semi-arid degraded sandy land of the Gonghe Basin, Tibet Plateau Solid Earth, 5, 1045-1054, 2014 Author(s): Y. Yu and Z. Q. Jia The Gonghe Basin is a sandified and desertified region of China, but the distribution of soil organic carbon (SOC) and total nitrogen (TN) along the cultivation chronosequence across this ecologically fragile region is not well understood. This study was carried out to understand the effects of restoration with Salix cheilophila for different periods of time (6, 11, 16, 21 years) to test whether it enhanced C and N storage. Soil samples, in four replications from seven depth increments (0–10, 10–20, 20–30, 30–50, 50–100, 100–150 and 150–200 cm), were collected in each stand. Soil bulk density, SOC, TN, aboveground biomass and root biomass were measured. Results indicated that changes occurred in both the upper and deeper soil layers with an increase in revegetation time. The 0–200 cm soil showed that the 6-year stand gained 3.89 Mg C ha −1 and 1.00 Mg N ha −1 , which accounted for 40.82% of the original SOC and 11.06% of the TN of the 0-year stand. The 11-year stand gained 7.82 Mg C ha −1 and 1.98 Mg N ha −1 in the 0–200 cm soil layers, accounting for 58.06% of the SOC and 19.80% of the TN of the 0-year stand. The 16-year stand gained 11.32 Mg C ha −1 and 3.30 Mg N ha −1 in the 0–200 cm soil layers, accounting for 66.71% of the SOC and 21.98% of the TN of the 0-year stand. The 21-year stand gained 13.05 Mg C ha −1 and 5.45 Mg N ha −1 from the same soil depth, accounting for 69.79% of the SOC and 40.47% of the TN compared with the 0-year stand. The extent of these changes depended on soil depth and plantation age. The results demonstrated that, as stand age increased, the storage of SOC and TN increased. These results further indicated that restoration with S. cheilophila has positive impacts on the Gonghe Basin and has increased the capacity of SOC sequestration and N storage. The shrub's role as carbon sink is compatible with system management and persistence. The findings are significant for assessing C and N sequestration accurately in semi-arid degraded high, cold sandy regions in the future.

Description: Simulation of groundwater and surface water over the continental US using a hyperresolution, integrated hydrologic model Geoscientific Model Development Discussions, 7, 7317-7349, 2014 Author(s): R. M. Maxwell, L. E. Condon, and S. J. Kollet Interactions between surface and groundwater systems are well-established theoretically and observationally. While numerical models that solve both surface and subsurface flow equations in a single framework (matrix) are increasingly being applied, computational limitations have restricted their use to local and regional studies. Regional or watershed, scale simulations have been effective tools in understanding hydrologic processes, however there are still many questions, such as the adaptation of water resources to anthropogenic stressors and climate variability, that need to be answered across large spatial extents at high resolution. In response to this "grand challenge" in hydrology, we present the results of a parallel, integrated hydrologic model simulating surface and subsurface flow at high spatial resolution (1 km) over much of continental North America (~ 6 300 000 or 6.3 million km 2 ). These simulations provide predictions of hydrologic states and fluxes, namely water table depth and streamflow, at unprecedented scale and resolution. The physically-based modeling approach used here requires limited parameterizations and relies only on more fundamental inputs, such as topography, hydrogeologic properties and climate forcing. Results are compared to observations and provide mechanistic insight into hydrologic process interaction. This study demonstrates both the feasibility of continental scale integrated models and their utility for improving our understanding of large-scale hydrologic systems; the combination of high resolution and large spatial extent facilitates novel analysis of scaling relationships using model outputs.

Description: EDDA: integrated simulation of debris flow erosion, deposition and property changes Geoscientific Model Development Discussions, 7, 7267-7316, 2014 Author(s): H. X. Chen and L. M. Zhang Debris flow material properties change during the initiation, transportation and deposition processes, which influences the runout characteristics of the debris flow. A quasi-three-dimensional depth-integrated numerical model, EDDA, is presented in this paper to simulate debris flow erosion, deposition and induced material property changes. The model considers changes in debris flow density, yield stress and dynamic viscosity during the flow process. The yield stress of debris flow mixture is determined at limit equilibrium using the Mohr–Coulomb equation, which is applicable to clear water flow, hyper-concentrated flow and fully developed debris flow. To assure numerical stability and computational efficiency at the same time, a variable time stepping algorithm is developed to solve the governing differential equations. Four numerical tests are conducted to validate the model. The first two tests involve a one-dimensional dam-break water flow and a one-dimensional debris flow with constant properties. The last two tests involve erosion and deposition, and the movement of multi-directional debris flows. The changes in debris flow mass and properties due to either erosion or deposition are shown to affect the runout characteristics significantly. The model is also applied to simulate a large-scale debris flow in Xiaojiagou Ravine to test the performance of the model in catchment-scale simulations. The results suggest that the model estimates well the volume, inundated area, and runout distance of the debris flow. The model is intended for use as a module in a real-time debris flow warning system.

Description: A catalog of high-impact windstorms in Switzerland since 1859 Natural Hazards and Earth System Science, 14, 2867-2882, 2014 Author(s): P. Stucki, S. Brönnimann, O. Martius, C. Welker, M. Imhof, N. von Wattenwyl, and N. Philipp In recent decades, extremely hazardous windstorms have caused enormous losses to buildings, infrastructure and forests in Switzerland. This has increased societal and scientific interest in the intensity and frequency of historical high-impact storms. However, high-resolution wind data and damage statistics mostly span recent decades only. For this study, we collected quantitative (e.g., volumes of windfall timber, losses relating to buildings) and descriptive (e.g., forestry or insurance reports) information on the impact of historical windstorms. To define windstorm severity, normalized and declustered quantitative data were processed by extreme value statistics. Descriptive information was classified using a conceptual guideline. Validation with independent damage information, as well as comparison with wind measurements and a reanalysis, indicates that the most hazardous winter storms are captured, while too few moderate windstorms are detected. Strong storms in the wind measurements and reanalysis are thus added to the catalog. The final catalog encompasses approximately 240 high-impact windstorms in Switzerland since 1859. It features three robust severity classes and contains eight extreme windstorms. Evidence of high winter storm activity in the early and late 20th century compared to the mid-20th century in both damage and wind data indicates a co-variability of hazard and related damage on decadal timescales.

Description: A GIS-based model to estimate flood consequences and the degree of accessibility and operability of strategic emergency response structures in urban areas Natural Hazards and Earth System Science, 14, 2847-2865, 2014 Author(s): R. Albano, A. Sole, J. Adamowski, and L. Mancusi Efficient decision-making regarding flood risk reduction has become a priority for authorities and stakeholders in many European countries. Risk analysis methods and techniques are a useful tool for evaluating costs and benefits of possible interventions. Within this context, a methodology to estimate flood consequences was developed in this paper that is based on GIS, and integrated with a model that estimates the degree of accessibility and operability of strategic emergency response structures in an urban area. The majority of the currently available approaches do not properly analyse road network connections and dependencies within systems, and as such a loss of roads could cause significant damages and problems to emergency services in cases of flooding. The proposed model is unique in that it provides a maximum-impact estimation of flood consequences on the basis of the operability of the strategic emergency structures in an urban area, their accessibility, and connection within the urban system of a city (i.e. connection between aid centres and buildings at risk), in the emergency phase. The results of a case study in the Puglia region in southern Italy are described to illustrate the practical applications of this newly proposed approach. The main advantage of the proposed approach is that it allows for defining a hierarchy between different infrastructure in the urban area through the identification of particular components whose operation and efficiency are critical for emergency management. This information can be used by decision-makers to prioritize risk reduction interventions in flood emergencies in urban areas, given limited financial resources.

Description: Wind waves in the Black Sea: results of a hindcast study Natural Hazards and Earth System Science, 14, 2883-2897, 2014 Author(s): V. S. Arkhipkin, F. N. Gippius, K. P. Koltermann, and G. V. Surkova In this study we describe the wind wave fields in the Black Sea. The general aims of the work were the estimation of statistical wave parameters and the assessment of interannual and seasonal wave parameter variability. The domain of this study was the entire Black Sea. Wave parameters were calculated by means of the SWAN wave model on a 5 × 5 km rectangular grid. Initial conditions (wind speed and direction) for the period between 1949 and 2010 were derived from the NCEP/NCAR reanalysis. According to our calculations the average significant wave height on the Black Sea does not exceed 0.7 m. Areas of most significant heavy sea are the southwestern and the northeastern parts of the sea as expressed in the spatial distribution of significant wave heights, wave lengths and periods. Besides, long-term annual variations of wave parameters were estimated. Thus, linear trends of the annual total duration of storms and of their quantity are nearly stable over the hindcast period. However, an intensification of storm activity is observed in the 1960s–1970s.

Description: Northern Hemisphere storminess in the Norwegian Earth System Model (NorESM1-M) Geoscientific Model Development Discussions, 7, 8975-9015, 2014 Author(s): E. M. Knudsen and J. E. Walsh Metrics of storm activity in Northern Hemisphere high- and midlatitudes are evaluated from historical output and future projections by the Norwegian Earth System Model (NorESM1-M) coupled global climate model. The European Re-Analysis Interim (ERA-Interim) and the Community Climate System Model (CCSM4), a global climate model of the same vintage as NorESM1-M, provide benchmarks for comparison. The focus is on the autumn and early winter (September through December), the period when the ongoing and projected Arctic sea ice retreat is greatest. Storm tracks derived from a vorticity-based algorithm for storm identification are reproduced well by NorESM1-M, although the tracks are somewhat better resolved in the higher-resolution ERA-Interim and CCSM4. The tracks are projected to shift polewards in the future as climate changes under the Representative Concentration Pathway (RCP) forcing scenarios. Cyclones are projected to become generally more intense in the high-latitudes, especially over the Alaskan region, although in some other areas the intensity is projected to decrease. While projected changes in track density are less coherent, there is a general tendency towards less frequent storms in midlatitudes and more frequent storms in high-latitudes, especially the Baffin Bay/Davis Strait region. Autumn precipitation is projected to increase significantly across the entire high-latitudes. Together with the projected increases in storm intensity and sea level and the loss of sea ice, this increase in precipitation implies a greater vulnerability to coastal flooding and erosion, especially in the Alaskan region. The projected changes in storm intensity and precipitation (as well as sea ice and sea level pressure) scale generally linearly with the RCP value of the forcing and with time through the 21st century.

Description: Preface: Environmental benefits of biochar Solid Earth, 5, 1301-1303, 2014 Author(s): J. Paz-Ferreiro, A. Méndez, A. M. Tarquis, A. Cerdà, and G. Gascó

Description: Factors affecting flood insurance purchase in residential properties in Johor, Malaysia Natural Hazards and Earth System Science, 14, 3297-3310, 2014 Author(s): U. G. Aliagha, T. E. Jin, W. W. Choong, M. Nadzri Jaafar, and H. M. Ali High-impact floods have become a virtually annual experience in Malaysia, yet flood insurance has remained a grossly neglected part of comprehensive integrated flood risk management. Using discriminant analysis, this study seeks to identify the demand-side variables that best predict flood insurance purchase and risk aversion between two groups of residential homeowners in three districts of Johor State, Malaysia: those who purchased flood insurance and those who did not. Our results revealed an overall 34% purchase rate, with Kota Tinggi district having the highest (44%) and thus the highest degree of flood risk aversion. The Wilks' lambda F test for equality of group means, standardised discriminant function coefficients, structure correlation, and canonical correlation has clearly shown that there are strong significant attribute differences between the two groups of homeowners, based on the measures of objective flood risk exposure, subjective risk perception, and socio-economic cum demographic variables. However, the measures of subjective risk perception were found to be more predictive of flood insurance purchase and flood risk aversion.

Description: Kinematics of a mass movement constrained by sparse and inhomogeneous data Natural Hazards and Earth System Science, 11, 1609-1618, 2011 Author(s): M. Karbon, E. Brückl, E. Hegedüs, and A. Preh On 12 February 2008, a landslide occurred along a 50 m high bank of the Danube river near Dunaszekcsö, Hungary. The initial state is only incompletely documented and the geodetic data acquired after the mass movement are sparse. A generalized 3-D topographic model of the landslide and its surrounding area was assembled and a representative longitudinal profile extracted. The reconstruction of the original surface is based on an orthophoto as well as on morphological considerations. Recorded observations include the locations of the outcrops of basal sliding surfaces, displacements at the main scarp and in the lower part of the slide, and a value to describe the total mass transport. Such sparse and inhomogeneous data were insufficient to derive a comprehensive documentation of the landslide or obtain adequate constraints for an accurate numerical analysis. Therefore, slider block models were fitted to the field data, which have only a small number of free parameters. A general view on the morphology of the mass movement justifies its classification as a rotational slide. A double slider block model fits all observational parameters within their error margin and supplies valuable information on the geometry of the slide. Estimates of the residual friction angles were derived and the question of reactivation was addressed. Finite Difference (FD) modelling and the application of conventional stability analysis support the geometry of the slider blocks and the computed average residual friction angles. Generally, the results are assumed to represent preliminary information, which could only be attained by the combination of the thinly distributed geodetic data with qualitative morphological observations and the implementation of a model. This type of information can be gained quickly and may be valuable for preliminary hazard mitigation measures or the planning of a comprehensive exploration and monitoring program.

Description: Looking for evidence of climate change impacts in the eastern Irish Sea Natural Hazards and Earth System Science, 11, 1641-1656, 2011 Author(s): L. S. Esteves, J. J. Williams, and J. M. Brown Although storminess is often cited as a driver of long-term coastal erosion, a lack of suitable datasets has only allowed objective assessment of this claim in a handful of case studies. This reduces our ability to understand and predict how the coastline may respond to an increase in "storminess" as suggested by global and regional climate models. With focus on 16 km of the Sefton coastline bordering the eastern Irish Sea (UK), this paper analyses available measured datasets of water level, surge level, wave height, wind speed and barometric pressure with the objective of finding trends in metocean climate that are consistent with predictions. The paper then examines rates of change in shoreline position over the period 1894 to 2005 with the aim of establishing relationships with climatic variability using a range of measured and modelled metocean parameters (with time spans varying from two to eight decades). With the exception of the mean monthly wind speed, available metocean data do not indicate any statistically significant changes outside seasonal and decadal cycles. No clear relationship was found between changes in metocean conditions and rates of shoreline change along the Sefton coast. High interannual variability and the lack of long-term measurements make unambiguous correlations between climate change and shoreline evolution problematic. However, comparison between the North Atlantic Oscillation winter index (NAOw) and coastline changes suggest increased erosion at times of decreasing NAOw values and reduced erosion at times of increasing NAOw values. Erosion tends to be more pronounced when decreasing NAOw values lead to a strong negative NAO phase. At present, anthropogenic changes in the local sediment budget and the short-term impact of extreme events are still the largest threat likely to affect coastal flooding and erosion risk in the short- and medium-term. Nevertheless, the potential impacts of climate change in the long-term should not be ignored.

Description: Comparing historical-hydrogeomorphological reconstitution and hydrological-hydraulic modelling in the estimation of flood-prone areas – a case study in Central Portugal Natural Hazards and Earth System Science, 11, 1669-1681, 2011 Author(s): P. P. Santos, A. O. Tavares, and A. I. A. S. S. Andrade The Arunca River basin in Central Portugal has a historical record of hazardous events related to floods, causing widespread disturbance. This article describes the application of two approaches based on well-known methods for the estimation of flood-prone areas: (i) historical-hydrogeomorphological reconstitution, applied to the entire Arunca River basin, and (ii) hydrological-hydraulic modelling, applied to four sections selected from different (upper, middle and lower) sectors of the basin and including urban and rural areas along the Arunca River. The mapping of the flood-prone areas obtained by these two methods was compared in order to identify the main differences and similarities. Human interventions (river channel and floodplain morphological changes) were found to be the main factor explaining the differences and similarities between the results obtained by both methods. The application of hydrological-hydraulic modelling proved important in reinforcing the results of the historical-hydrogeomorphological method; it also helped in complementing the results produced by the latter method in urban areas and in areas with insufficient historical records. The application of the historical-hydrogeomorphological method, in turn, allowed for the size of the flood-prone areas to be determined where the primary data (e.g. geometry, roughness and flow) was not accurate enough for hydrological-hydraulic modelling. The methodological approach adopted demonstrates the strong complementary relationship between the different existing methods for estimating flood-prone areas, and may be reproduced for other drainage basins.

Description: The contribution of engineering surveys by means of GPS to the determination of crustal movements in Istanbul Natural Hazards and Earth System Science, 11, 1705-1713, 2011 Author(s): M. Özyaşar and M. T. Özlüdemir Global Navigation Satellite Systems (GNSS) are space based positioning techniques and widely used in geodetic applications. Geodetic networking accomplished by engineering surveys constitutes one of these tasks. Geodetic networks are used as the base of all kinds of geodetic implementations, Co from the cadastral plans to the relevant surveying processes during the realization of engineering applications. Geodetic networks consist of control points positioned in a defined reference frame. In fact, such positional information could be useful for other studies as well. One of such fields is geodynamic studies that use the changes of positions of control stations within a network in a certain time period to understand the characteristics of tectonic movements. In Turkey, which is located in tectonically active zones and struck by major earthquakes quite frequently, the positional information obtained in engineering surveys could be very useful for earthquake related studies. For this purpose, a GPS (Global Positioning System) network of 650 stations distributed over Istanbul (Istanbul GPS Triangulation Network; abbreviated IGNA) covering the northern part of the North Anatolian Fault Zone (NAFZ) was established in 1997 and measured in 1999. From 1998 to 2004, the IGNA network was extended to 1888 stations covering an area of about 6000 km 2 , the whole administration area of Istanbul. All 1888 stations within the IGNA network were remeasured in 2005. In these two campaigns there existed 452 common points, and between these two campaigns two major earthquakes took place, on 17 August and 12 November 1999 with a Richter scale magnitude of 7.4 and 7.2, respectively. Several studies conducted for estimating the horizontal and vertical displacements as a result of these earthquakes on NAFZ are discussed in this paper. In geodynamic projects carried out before the earthquakes in 1999, an annual average velocity of 2–2.5 cm for the stations along the NAFZ were estimated. Studies carried out using GPS observations in the same area after these earthquakes indicated that point displacements vary depending on their distance to the epicentres of the earthquakes. But the directions of point displacements are similar. The results obtained through the analysis of the IGNA network also show that there is a common trend in the directions of point displacements in the study area. In this paper, the past studies about the tectonics of Marmara region are summarised and the results of the displacement analysis on the IGNA network are discussed.

Description: Quantitative estimation of landslide risk from rapid debris slides on natural slopes in the Nilgiri hills, India Natural Hazards and Earth System Science, 11, 1723-1743, 2011 Author(s): P. Jaiswal, C. J. van Westen, and V. Jetten A quantitative procedure for estimating landslide risk to life and property is presented and applied in a mountainous area in the Nilgiri hills of southern India. Risk is estimated for elements at risk located in both initiation zones and run-out paths of potential landslides. Loss of life is expressed as individual risk and as societal risk using F-N curves, whereas the direct loss of properties is expressed in monetary terms. An inventory of 1084 landslides was prepared from historical records available for the period between 1987 and 2009. A substantially complete inventory was obtained for landslides on cut slopes (1042 landslides), while for natural slopes information on only 42 landslides was available. Most landslides were shallow translational debris slides and debris flowslides triggered by rainfall. On natural slopes most landslides occurred as first-time failures. For landslide hazard assessment the following information was derived: (1) landslides on natural slopes grouped into three landslide magnitude classes, based on landslide volumes, (2) the number of future landslides on natural slopes, obtained by establishing a relationship between the number of landslides on natural slopes and cut slopes for different return periods using a Gumbel distribution model, (3) landslide susceptible zones, obtained using a logistic regression model, and (4) distribution of landslides in the susceptible zones, obtained from the model fitting performance (success rate curve). The run-out distance of landslides was assessed empirically using landslide volumes, and the vulnerability of elements at risk was subjectively assessed based on limited historic incidents. Direct specific risk was estimated individually for tea/coffee and horticulture plantations, transport infrastructures, buildings, and people both in initiation and run-out areas. Risks were calculated by considering the minimum, average, and maximum landslide volumes in each magnitude class and the corresponding minimum, average, and maximum run-out distances and vulnerability values, thus obtaining a range of risk values per return period. The results indicate that the total annual minimum, average, and maximum losses are about US$ 44 000, US$ 136 000 and US$ 268 000, respectively. The maximum risk to population varies from 2.1 × 10 −1 for one or more lives lost to 6.0 × 10 −2 yr −1 for 100 or more lives lost. The obtained results will provide a basis for planning risk reduction strategies in the Nilgiri area.

Description: Exploring the potentials and limitations of the time-reversal imaging of finite seismic sources Solid Earth, 2, 95-105, 2011 Author(s): S. Kremers, A. Fichtner, G. B. Brietzke, H. Igel, C. Larmat, L. Huang, and M. Käser The characterisation of seismic sources with time-reversed wave fields is developing into a standard technique that has already been successful in numerous applications. While the time-reversal imaging of effective point sources is now well-understood, little work has been done to extend this technique to the study of finite rupture processes. This is despite the pronounced non-uniqueness in classic finite source inversions. The need to better constrain the details of finite rupture processes motivates the series of synthetic and real-data time reversal experiments described in this paper. We address questions concerning the quality of focussing in the source area, the localisation of the fault plane, the estimation of the slip distribution and the source complexity up to which time-reversal imaging can be applied successfully. The frequency band for the synthetic experiments is chosen such that it is comparable to the band usually employed for finite source inversion. Contrary to our expectations, we find that time-reversal imaging is useful only for effective point sources, where it yields good estimates of both the source location and the origin time. In the case of finite sources, however, the time-reversed field does not provide meaningful characterisations of the fault location and the rupture process. This result cannot be improved sufficiently with the help of different imaging fields, realistic modifications of the receiver geometry or weights applied to the time-reversed sources. The reasons for this failure are manifold. They include the choice of the frequency band, the incomplete recording of wave field information at the surface, the excitation of large-amplitude surface waves that deteriorate the depth resolution, the absence of a sink that should absorb energy radiated during the later stages of the rupture process, the invisibility of small slip and the neglect of prior information concerning the fault geometry and the inherent smoothness of seismologically inferred Earth models that prevents the beneficial occurrence of strong multiple-scattering. The condensed conclusion of our study is that the limitations of time-reversal imaging – at least in the frequency band considered here – start where the seismic source stops being effectively point-localised.

Description: Trends in climatic variables and future reference evapotranspiration in Duero Valley (Spain) Natural Hazards and Earth System Science, 11, 1795-1805, 2011 Author(s): R. Moratiel, R. L. Snyder, J. M. Durán, and A. M. Tarquis The impact of climate change and its relation with evapotranspiration was evaluated in the Duero River Basin (Spain). The study shows possible future situations 50 yr from now from the reference evapotranspiration (ET o ). The maximum temperature ( T max ), minimum temperature ( T min ), dew point ( T d ), wind speed ( U ) and net radiation ( R n ) trends during the 1980–2009 period were obtained and extrapolated with the FAO-56 Penman-Montheith equation to estimate ET o . Changes in stomatal resistance in response to increases in CO 2 were also considered. Four scenarios were done, taking the concentration of CO 2 and the period analyzed (annual or monthly) into consideration. The scenarios studied showed the changes in ET o as a consequence of the annual and monthly trends in the variables T max , T min , T d , U and R n with current and future CO 2 concentrations (372 ppm and 550 ppm). The future ET o showed increases between 118 mm (11 %) and 55 mm (5 %) with respect to the current situation of the river basin at 1042 mm. The months most affected by climate change are May, June, July, August and September, which also coincide with the maximum water needs of the basin's crops.

Description: Possible interrelation between the lead time of precursory seismic electric signals (SES) and geodynamics in Aegean Sea Natural Hazards and Earth System Science, 11, 1599-1603, 2011 Author(s): E. Dologlou The seismicity of the last 15 years in the Aegean Sea revealed that earthquakes ( M w 〉 5) with epicentres falling within the Sporades basin and the confined area north of Samos island were preceded by electric seismic signals (SES) with a remarkably long lead time. A possible explanation of this behaviour by means of specific tectonics and geodynamics which characterise these two regions, such as a significant small crustal thickness and a high heat flow rate, has been attempted. New data seem to strengthen the above hypothesis.

Description: Native American lithic procurement along the international border in the boot heel region of southwestern New Mexico Solid Earth, 2, 75-93, 2011 Author(s): K. E. Zeigler, P. Hogan, C. Hughes, and A. Kurota Multidisciplinary field projects can be very useful to a more fundamental understanding of the world around us, though these projects are not as common as they should be. In particular, the combination of archeology and geology combines our understanding of human behavior and human use of the landscape with an intimate knowledge of geologic processes and the materials available for human use in order to gain a broader understanding of human-Earth interaction. Here we present data from a cross-disciplinary project that uses a common dataset, archeological artifacts, to explore the anthropological and geologic implications of useage patterns. Archeological excavations and surveys conducted by the Office of Contract Archeology in 2007 along the route of the proposed international border fence reveal patterns of use of geologic materials by Archaic, Formative and Protohistoric Native Americans in the Boot Heel of southwestern New Mexico. Thousands of artifacts were recorded in multiple sites from Guadalupe Pass in the southern Peloncillo Mountains to the Carrizalillo Hills west of Columbus. We identified the lithologies of artifacts, ranging from projectile points to groundstones, and then constructed material movement maps based on either known procurement sites ("quarries") or outcrops identified as the closest source to a given site for each lithology. Not unexpectedly, the majority of the rock types utilized by native peoples are local siliceous volcanic materials. However, several artifacts constructed from obsidian were transported into the region from northern Mexico and eastern Arizona, indicating long-distance travel and/or trade routes. We also examine useage pattern difference between Archaic, Formative and Protohistoric sites. Additionally, a dramatic change in distribution of sources for geologic materials occurs between one pre-Spanish site and one post-Spanish site that are adjacent to one another.

Description: The 1-way on-line coupled atmospheric chemistry model system MECO(n) – Part 1: The limited-area atmospheric chemistry model COSMO/MESSy Geoscientific Model Development Discussions, 4, 1305-1358, 2011 Author(s): A. Kerkweg and P. Jöckel The numerical weather prediction model of the Consortium for Small Scale Modelling (COSMO), maintained by the German weather service (DWD), is connected with the Modular Earth Submodel System (MESSy). This effort is undertaken in preparation of a~new, limited-area atmospheric chemistry model. This model is as consistent as possible, with respect to atmospheric chemistry and related processes, with a previously developed global atmospheric chemistry general circulation model: the ECHAM/MESSy Atmospheric Chemistry (EMAC) model. The combined system constitutes a new research tool, bridging the global to the meso-γ scale for atmospheric chemistry research. MESSy provides the infrastructure and includes, among others, the process and diagnostic submodels for atmospheric chemistry simulations. Furthermore, MESSy is highly flexible allowing model setups with tailor made complexity, depending on the scientific question. Here, the connection of the MESSy infrastructure to the COSMO model is documented. Previously published prototype submodels for simplified tracer studies are generalised to be plugged-in and used in the global and the limited-area model. They are used to evaluate the tracer transport characteristics of the new COSMO/MESSy model system, an important prerequisite for future atmospheric chemistry applications. A supplementary document with further details on the technical implementation of the MESSy interface into COSMO with a complete list of modifications to the COSMO code is provided.

Description: Daytime variations of foE connected to earthquakes Natural Hazards and Earth System Science, 11, 1807-1812, 2011 Author(s): E. V. Liperovskaya, V. V. Bogdanov, P.-F. Biagi, C.-V. Meister, and V. A. Liperovsky In the present work it is shown that, in accordance with the observations of the vertical sounding station "Tashkent", the critical foE-frequency of the daytime E-layer increases about one day before winter-earthquakes with magnitudes M 〉 5 and depths of the epicentre of h 〈 60 km, which appeared at distances of R 〈 2000 km from the station. The reliability of the result is larger than 99 %. The phenomenon is not observed for summer-earthquakes. It seems to be determined by the atmospheric wind system. Further, the variations of the foE-frequency are compared with possible simultaneous variations of the critical frequency foF2 of the F2-layer. First results show that only very large changes of the ionisation density in the E-layer influence the ionisation density in the F-region. Therefore, no synchronous growth of the foE- and foF2-frequencies 1–2 days before seismic shocks could be observed.

Description: A re-evaluation of the Italian historical geomagnetic catalogue: implications for paleomagnetic dating at active Italian volcanoes Solid Earth, 2, 65-74, 2011 Author(s): F. D'Ajello Caracciolo, A. Pignatelli, F. Speranza, and A. Meloni Paleomagnetism is proving to represent one of the most powerful dating tools of volcanics emplaced in Italy during the last few centuries/millennia. This method requires that valuable proxies of the local geomagnetic field (paleo)secular variation ((P)SV) are available. To this end, we re-evaluate the whole Italian geomagnetic directional dataset, consisting of 833 and 696 declination and inclination measurements, respectively, carried out since 1640 AD at several localities. All directions were relocated via the virtual geomagnetic pole method to Stromboli (38.8° N, 15.2° E), the rough centre of the active Italian volcanoes. For declination-only measurements, missing inclinations were derived (always by pole method) by French data (for period 1670–1789), and by nearby Italian sites/years (for periods 1640–1657 and 1790–1962). Using post-1825 declination values, we obtain a 0.46 ± 0.19° yr −1 westward drift of the geomagnetic field for Italy. The original observation years were modified, considering such drift value, to derive at a drift-corrected relocated dataset. Both datasets were found to be in substantial agreement with directions derived from the field models by Jackson et al. (2000) and Pavon-Carrasco et al. (2009). However, the drift-corrected dataset minimizes the differences between the Italian data and both field models, and eliminates a persistent 1.6° shift of 1933–1962 declination values from Castellaccio with respect to other nearly coeval Italian data. The relocated datasets were used to calculate two post-1640 Italian SV curves, with mean directions calculated every 30 and 10 years before and after 1790, respectively. The curve comparison suggests that both available field models yield the best available SV curve to perform paleomagnetic dating of 1600–1800 AD Italian volcanics, while the Italian drift-corrected curve is probably preferable for the 19th century. For the 20th century, the global model by Jackson et al. (2000) yields more accurate inclination values, while the declinations from our drift-corrected curve seem to better represent the local field evolution, at least for the first half of the century.

Description: Carbon monoxide as a tracer for tropical troposphere to stratosphere transport in the Chemical Lagrangian Model of the Stratosphere (CLaMS) Geoscientific Model Development Discussions, 4, 1185-1211, 2011 Author(s): R. Pommrich, R. Müller, J.-U. Grooß, P. Konopka, G. Günther, H.-C. Pumphrey, S. Viciani, F. D'Amato, and M. Riese Variations in the mixing ratio of trace gases of tropospheric origin entering the stratosphere in the tropics are of interest for assessing both troposphere to stratosphere transport fluxes in the tropics and the impact on the composition of the tropical lower stratosphere of quasi-horizontal in-mixing into the tropical tropopause layer from the mid-latitude stratosphere. Here, we present a simplified chemistry scheme for the Chemical Lagrangian Model of the Stratosphere (CLaMS) for the simulation, at comparatively low numerical cost, of CO, ozone, and long-lived trace substances (CH 4 , N 2 O, CCl 3 F, and CO 2 ) in the lower tropical stratosphere. The boundary conditions at the ground are represented for the long-lived trace substances CH 4 , N 2 O, CCl 3 F, and CO 2 based on ground-based measurements. The boundary condition for CO in the free troposphere is deduced from MOPITT measurements. We find that the zonally averaged tropical CO anomaly patterns simulated by this model version of CLaMS are in good agreement with observations. The introduction of a new scheme in the ECMWF integrated forecast system (Tompkins et al., 2007) for the ice supersaturation after September 2006, results in a somewhat less good agreement between observed and simulated CO patterns in the tropical lower stratosphere after this date.

Description: Shallow circulation groundwater – the main type of water containing hazardous radon concentration Natural Hazards and Earth System Science, 11, 1695-1703, 2011 Author(s): T. A. Przylibski The main factors affecting the value of 222 Rn activity concentration in groundwater are the emanation coefficient of reservoir rocks ( K em ), the content of parent 226 Ra in these rocks ( q ), changes in the volume and flow velocity as well as the mixing of various groundwater components in the circulation system. The highest values of 222 Rn activity concentration are recorded in groundwaters flowing towards an intake through strongly cracked reservoir rocks undergoing weathering processes. Because of these facts, waters with hazardous radon concentration levels, i.e. containing more than 100 Bq dm −3 222 Rn, could be characterised in the way that follows. They are classified as radon waters, high-radon waters and extreme-radon waters. They belong to shallow circulation systems (at less than a few dozen metres below ground level) and are contemporary infiltration waters, i.e. their underground flow time ranges from several fortnights to a few decades. Because of this, these are usually poorly mineralised waters (often below 0.2–0.5 g dm −3 ). Their resources are renewable, but also vulnerable to contamination. Waters of this type are usually drawn from private intakes, supplying water to one or at most a few households. Due to an increased risk of developing lung tumours, radon should be removed from such waters when still in the intake. To achieve this aim, appropriate legislation should be introduced in many countries.

Description: Precipitation change in Southern Italy linked to global scale oscillation indexes Natural Hazards and Earth System Science, 11, 1683-1694, 2011 Author(s): T. Caloiero, R. Coscarelli, E. Ferrari, and M. Mancini This study investigates precipitation variability in five regions of Southern Italy (Campania, Apulia, Basilicata, Calabria and Sicily) using a homogeneous database of about 70 rain gauges with more than 50 years of observation. First, a statistical analysis was performed through the Mann-Kendall non-parametric test in order to determine rainfall the trend on both yearly and seasonal scales. Then, the relationship between the rainfall and some teleconnection pattern indexes was investigated using Spearman's test. The results show remarkable statistically significant negative trends for annual and winter aggregations in most part of the series. Moreover, a strong correlation has emerged between the teleconnection patterns and precipitation in Southern Italy, particularly in winter and on the Tyrrhenian side of the study area.

Description: The Met Office Unified Model Global Atmosphere 3.0/3.1 and JULES Global Land 3.0/3.1 configurations Geoscientific Model Development Discussions, 4, 1213-1271, 2011 Author(s): D. N. Walters, M. J. Best, A. C. Bushell, D. Copsey, J. M. Edwards, P. D. Falloon, C. M. Harris, A. P. Lock, J. C. Manners, C. J. Morcrette, M. J. Roberts, R. A. Stratton, S. Webster, J. M. Wilkinson, M. R. Willett, I. A. Boutle, P. D. Earnshaw, P. G. Hill, C. MacLachlan, G. M. Martin, W. Moufouma-Okia, M. D. Palmer, J. C. Petch, G. G. Rooney, A. A. Scaife, and K. D. Williams We describe Global Atmosphere 3.0 (GA3.0): a configuration of the Met Office Unified Model (MetUM) developed for use across climate research and weather prediction activities. GA3.0 has been formulated by converging the development paths of the Met Office's weather and climate global atmospheric model components such that wherever possible, atmospheric processes are modelled or parametrized seamlessly across spatial resolutions and timescales. This unified development process will provide the Met Office and its collaborators with regular releases of a configuration that has been evaluated, and can hence be applied, over a variety of modelling régimes. We also describe Global Land 3.0 (GL3.0): a configuration of the JULES community land surface model developed for use with GA3.0. This paper provides a comprehensive technical and scientific description of the GA3.0 and GL3.0 (and related GA3.1 and GL3.1) configurations and presents the results of some initial evaluations of their performance in various applications. It is to be the first in a series of papers describing each subsequent Global Atmosphere release; this will provide a single source of reference for established users and developers as well as researchers requiring access to a current, but trusted, global MetUM setup.

Description: FAMOUS, faster: using parallel computing techniques to accelerate the FAMOUS/HadCM3 climate model with a focus on the radiative transfer algorithm Geoscientific Model Development Discussions, 4, 1273-1303, 2011 Author(s): P. Hanappe, A. Beurivé, F. Laguzet, L. Steels, N. Bellouin, O. Boucher, Y. H. Yamazaki, T. Aina, and M. Allen We have optimised the atmospheric radiation algorithm of the FAMOUS climate model on several hardware platforms. The optimisation involved translating the Fortran code to C and restructuring the algorithm around the computation of a single air column. A task queue and a thread pool are used to distribute the computation to several processors. Finally, four air columns are packed together in a single data structure and computed simultaneously using Single Instruction Multiple Data operations. The modified algorithm runs more than 50 times faster on the CELL's Synergistic Processing Elements than on its main PowerPC processing element. On Intel-compatible processors, the new radiation code runs 4 times faster and on graphics processors, using OpenCL, more than 2.5 times faster, as compared to the original code. Because the radiation code takes more than 60 % of the total CPU time, FAMOUS executes more than twice as fast. Our version of the algorithm returns bit-wise identical results, which demonstrates the robustness of our approach.

Description: Reconstruction of Atlantic historical winter coastal storms in the Spanish coasts of the Gulf of Cadiz, 1929–2005 Natural Hazards and Earth System Science, 11, 1715-1722, 2011 Author(s): P. Ribera, D. Gallego, C. Pena-Ortiz, L. Del Rio, T. A. Plomaritis, and J. Benavente This paper presents the reconstruction of a climatological series of winter coastal storms on the northern coasts of the Gulf of Cadiz. This series has been put together using information extracted from regional and local Spanish newspapers. It includes all the storms coming from the Atlantic sector that have been detected during the winter season, from October to March, between 1929 and 2005. In order to validate this historical storm series, it has been compared with storms series identified from quasi-observational data and using different wave heights as thresholds to decide what is to be considered as a coastal storm. Nearly 2.6 reports per year about coastal storms are published in the press which correspond to waves of 3.6 m high or more and to prevailing winds from a direction ranging between SSW and WNW. A long- term positive trend has been detected for the complete storm series. If only the instrumental period is analysed, no significant trend is detected. It is suggested that this difference might be associated with the impact of the North Atlantic Oscillation over the occurrence of storms in this area.

Description: The neutral temperature in the ionospheric dynamo region and the ionospheric F region density during Wenchuan and Pingtung Doublet earthquakes Natural Hazards and Earth System Science, 11, 1759-1768, 2011 Author(s): Y. Y. Sun, K.-I. Oyama, J. Y. Liu, H. K. Jhuang, and C. Z. Cheng One of the possible candidates which modifies the ionosphere before large earthquake is electric field. We presume that the electric field associated with large earthquakes is generated in the ionosphere dynamo region (100–120 km). This paper tries to identify the evidence of the contribution of the neutral atmosphere in the dynamo region. The relationship between the critical frequency at the F2 peak (foF2) and the height profile of the neutral atmosphere temperature was studied for two large earthquakes: Wenchuan, 2008 and Pingtung Doublet, 2006. It is found that the wave amplitude of the vertical wavelength 20–30 km which is usually superposed on the height profile of the neutral atmosphere temperature enhances when the foF2 increases. The correlation between the wave amplitude and foF2 is found better along a longitudinal direction than along latitude direction.

Description: The relationship between the performance of soil conditions and damage following an earthquake: a case study in Istanbul, Turkey Natural Hazards and Earth System Science, 11, 1745-1758, 2011 Author(s): G. Ç. İnce Istanbul city has experienced many strong earthquakes throughout its history and suffered extensive damage. The old Istanbul (Fatih and Eminonu districts), one of the most densely populated locations of Istanbul city, is a commercial centre and has many significant historical buildings. In this study, the data pertaining to the damage sustained by historical artifacts and structures from past earthquakes, are examined along with the soil amplification of the region, the liquefaction and slope stability risk in relation to the seismic microzonation maps which were prepared using geographic information system techniques. The relationship between soil behaviour and the damage resulting from previous earthquakes. The structural damage observed in the region was in accordance with the microzonation maps. Since the area does not have a high risk in terms of slope stability, this does not have much impact on the level of damage. However, it was found that soil amplification and partial liquefaction contributed to the damage to historical artifacts and structures.

Description: Evaluation of future hydrological cycle under climate change scenarios in a mesoscale Alpine watershed of Italy Natural Hazards and Earth System Science, 11, 1769-1785, 2011 Author(s): B. Groppelli, A. Soncini, D. Bocchiola, and R. Rosso We investigate future (2045–2054) hydrological cycle of the snow fed Oglio (≈1800 km 2 ) Alpine watershed in Northern Italy. A Stochastic Space Random Cascade (SSRC) approach is used to downscale future precipitation from three general circulation models, GCMs (PCM, CCSM3, and HadCM3) available within the IPCC's data base and chosen for this purpose based upon previous studies. We then downscale temperature output from the GCMs to obtain temperature fields for the area. We also consider a projected scenario based upon trends locally observed in former studies, LOC scenario. Then, we feed the downscaled fields to a minimal hydrological model to build future hydrological scenarios. We provide projected flow duration curves and selected flow descriptors, giving indication of expected modified (against control run for 1990–1999) regime of low flows and droughts and flood hazard, and thus evaluate modified peak floods regime through indexed flood. We then assess the degree of uncertainty, or spread, of the projected water resources scenarios by feeding the hydrological model with ensembles projections consistent with our deterministic (GCMs + LOC) scenarios, and we evaluate the significance of the projected flow variables against those observed in the control run. The climate scenarios from the adopted GCMs differ greatly from one another with respect to projected precipitation amount and temperature regimes, and so do the projected hydrological scenarios. A relatively good agreement is found upon prospective shrinkage and shorter duration of the seasonal snow cover due to increased temperature patterns, and upon prospective increase of hydrological losses, i.e. evapotranspiration, for the same reason. However, precipitation patterns are less consistent, because HadCM3 and PCM models project noticeably increased precipitation for 2045–2054, whereas CCSM3 provides decreased precipitation patterns therein. The LOC scenario instead displays unchanged precipitation. The ensemble simulations indicate that several projected flow variables under the considered scenarios are significantly different from their control run counterparts, and also that snow cover seems to significantly decrease in duration and depth. The proposed hydrological scenarios eventually provide a what-if analysis, giving a broad view of the possible expected impacts of climate change within the Italian Alps, necessary to trigger the discussion about future adaptation strategies.

Description: A tool for assessing the quality of the Mediterranean cyclone forecast: a numerical index Natural Hazards and Earth System Science, 11, 1787-1794, 2011 Author(s): M. A. Picornell, A. Jansà, and A. Genovés Cyclones affecting the Mediterranean region, sometimes related to severe weather events, are often not well represented enough in numerical model predictions. Assessing the quality of the forecast of these cyclonic structures would be a significant advance in better knowing the goodness of the weather forecast in this region, and particularly the quality of predictions of high impact phenomena. In order to estimate the cyclone forecast uncertainty in operational models, in this work we compare two cyclone databases for the period 2006–2007: one from the operational analyses of the T799 ECMWF deterministic model; and the other from the forecasts provided by the same model in three ranges, H+12, H+24, and H+48. The skill of the model to detect cyclones and its accuracy in describing their features are assessed. An index is presented as an indicator of the quality of the prediction, derived from the frequency distribution of errors in the prediction of four characteristics of the cyclone: position, central pressure value, geostrophic circulation, and domain. Some sub-indexes are derived to verify each of the variables separately in order to analyse the most frequent sources of error. Other sub-indexes are also defined to indicate possible biases in the numerical prediction model.

Description: Analyzing numerics of bulk microphysics schemes in Community models: warm rain processes Geoscientific Model Development Discussions, 4, 1403-1434, 2011 Author(s): I. Sednev and S. Menon In the last decade there has been only one study that discussed time integration scheme (TIS) applied to advance governing differential equations in bulk microphysics (BLK) schemes. Recently, Morrison and Gettelman (2008) examine numerical aspects of double-moment BLK scheme with diagnostic treatment of precipitating hydrometeors implemented into Community Atmosphere Model, version 3 (CAM) to find an acceptable level of accuracy and numerical stability. However, stability condition for their explicit non-positive definite TIS was not defined. It is conventionally thought that the Weather Research and Forecasting (WRF) model can be applied for a broad range of spatial scales from large eddy up to global scale simulations if time steps used for model integration satisfy to a certain limit imposed mainly by dynamics. However, numerics used in WRF BLK schemes has never been analyzed in detail. To improve creditability of BLK schemes we derive a general analytical stability and positive definiteness criteria for explicit Eulerian time integration scheme used to advanced finite-difference equations that govern warm rain formation processes in microphysics packages in Community models (CAM and WRF) and define well-behaved, conditionally well-behaved, and non-well-behaved Explicit Eulerian Bulk Microphysics Code (EEBMPC) classes. We highlight that source codes of BLK schemes, originally developed for use in cloud-resolving models, implemented in Community models belong to conditionally well-behaved EEBMPC class and exhibit better performance for finer spatial resolutions when time steps do not exceed seconds or tenths of seconds. For coarser spatial resolutions used in regional and global scale simulations time steps are usually increased from hundredths up to thousands of seconds. This might lead to a degradation of conditionally well-behaved EEBMPCs ability to calculate the amount of precipitation as well as its spatial and temporal distribution since both stability and positive definiteness conditions are not met in the TIS. The correction through the so called “mass conservation” technique commonly used in many models with bulk microphysics is a main characteristic of non-well-behaved EEBMPC, whose utilization leads to erroneous conclusions regarding relative importance of different microphysical processes. Moreover, surface boundary conditions for ocean, land, lake, and sea ice models are dependent on the precipitation and its spatial and temporal distribution. Uncertainties in calculations of temporal and spatial patterns of accumulated precipitation influence the global water cycle. In fact, numerics in non-well-behaved EEBMPCs, which are used in Community Earth System Model, act as a hidden climate forcing agent, if relatively long time steps are used for the host model integration. By analyzing numerics of warm rain processes in EEBMPCs implemented in Community models we provide general guidelines regarding appropriate choice of integration time steps for use in these models.

Description: Occurrence analysis of daily rainfalls through non-homogeneous Poissonian processes Natural Hazards and Earth System Science, 11, 1657-1668, 2011 Author(s): B. Sirangelo, E. Ferrari, and D. L. De Luca A stochastic model based on a non-homogeneous Poisson process, characterised by a time-dependent intensity of rainfall occurrence, is employed to explain seasonal effects of daily rainfalls exceeding prefixed threshold values. The data modelling has been performed with a partition of observed daily rainfall data into a calibration period for parameter estimation and a validation period for checking on occurrence process changes. The model has been applied to a set of rain gauges located in different geographical areas of Southern Italy. The results show a good fit for time-varying intensity of rainfall occurrence process by 2-harmonic Fourier law and no statistically significant evidence of changes in the validation period for different threshold values.

Description: Regional frequency analysis of extreme storm surges along the French coast Natural Hazards and Earth System Science, 11, 1627-1639, 2011 Author(s): L. Bardet, C.-M. Duluc, V. Rebour, and J. L'Her A good knowledge of extreme storm surges is necessary to ensure protection against flood. In this paper we introduce a methodology to determine time series of skew surges in France as well as a statistical approach for estimating extreme storm surges. With the aim to cope with the outlier issue in surge series, a regional frequency analysis has been carried out for the surges along the Atlantic coast and the Channel coast. This methodology is not the current approach used to estimate extreme surges in France. First results showed that the extreme events identified as outliers in at-site analyses do not appear to be outliers any more in the regional empirical distribution. Indeed the regional distribution presents a curve to the top with these extreme events that a mixed exponential distribution seems to recreate. Thus, the regional approach appears to be more reliable for some sites than at-site analyses. A fast comparison at a given site showed surge estimates with the regional approach and a mixed exponential distribution are higher than surge estimates with an at-site fitting. In the case of Brest, the 1000-yr return surge is 167 cm in height with the regional approach instead of 126 cm with an at-site analysis.

Description: The 1-way on-line coupled atmospheric chemistry model system MECO(n) – Part 2: On-line coupling Geoscientific Model Development Discussions, 4, 1359-1402, 2011 Author(s): A. Kerkweg and P. Jöckel A new, highly flexible model system for the seamless dynamical down-scaling of meteorological and chemical processes from the global to the meso-γ scale is presented. A global model and a cascade of an arbitrary number of limited-area model instances run concurrently in the same parallel environment, in which the coarser grained instances provide the boundary data for the finer grained instances. Thus, disk-space intensive and time consuming intermediate and pre-processing steps are entirely avoided and the time interpolation errors of common off-line nesting approaches are minimised. More specifically, the regional model COSMO of the German Weather Service (DWD) is nested on-line into the atmospheric general circulation model ECHAM5 within the Modular Earth Submodel System (MESSy) framework. ECHAM5 and COSMO have previously been equipped with the MESSy infrastructure, implying that the same process formulations (MESSy submodels) are available for both models. This guarantees the highest degree of achievable consistency, between both, the meteorological and chemical conditions at the domain boundaries of the nested limited-area model, and between the process formulations on all scales. The on-line nesting of the different models is established by a client-server approach with the newly developed Multi-Model-Driver (MMD), an additional component of the MESSy infrastructure. With MMD an arbitrary number of model instances can be run concurrently within the same message passing interface (MPI) environment, the respective coarser model (either global or regional) is the server for the nested finer (regional) client model, i.e., it provides the data required to calculate the initial and boundary fields to the client model. On-line nesting means that the coupled (client-server) models exchange their data via the computer memory, in contrast to the data exchange via files on disk in common off-line nesting approaches. MMD consists of a library (Fortran95 and some parts in C) which is based on the MPI standard and two new MESSy submodels, MMDSERV and MMDCLNT (both Fortran95) for the server and client models, respectively. MMDCLNT contains a further sub-submodel, INT2COSMO, for the interpolation of the coarse grid data provided by the server models (either ECHAM5/MESSy or COSMO/MESSy) to the grid of the respective client model (COSMO/MESSy). INT2COSMO is based on the off-line pre-processing tool INT2LM provided by the DWD. The new achievements allow the setup of model cascades for zooming (down-scaling) from the global scale to the lower edge of the meso-γ scale (≈1 km) with a very high degree of consistency between the different models and between the chemical and meteorological boundary conditions.

Description: Probabilistic assessments of climate change impacts on durum wheat in the Mediterranean region Natural Hazards and Earth System Science, 11, 1293-1302, 2011 Author(s): R. Ferrise, M. Moriondo, and M. Bindi Recently, the availability of multi-model ensemble prediction methods has permitted a shift from a scenario-based approach to a risk-based approach in assessing the effects of climate change. This provides more useful information to decision-makers who need probability estimates to assess the seriousness of the projected impacts. In this study, a probabilistic framework for evaluating the risk of durum wheat yield shortfall over the Mediterranean Basin has been exploited. An artificial neural network, trained to emulate the outputs of a process-based crop growth model, has been adopted to create yield response surfaces which are then overlaid with probabilistic projections of future temperature and precipitation changes in order to estimate probabilistic projections of future yields. The risk is calculated as the relative frequency of projected yields below a selected threshold. In contrast to previous studies, which suggest that the beneficial effects of elevated atmospheric CO 2 concentration over the next few decades would outweigh the detrimental effects of the early stages of climatic warming and drying, the results of this study are of greater concern.

Description: Debris-flow activity in abandoned channels of the Manival torrent reconstructed with LiDAR and tree-ring data Natural Hazards and Earth System Science, 11, 1247-1257, 2011 Author(s): J. Lopez Saez, C. Corona, M. Stoffel, A. Gotteland, F. Berger, and F. Liébault Hydrogeomorphic processes are a major threat in many parts of the Alps, where they periodically damage infrastructure, disrupt transportation corridors or even cause loss of life. Nonetheless, past torrential activity and the analysis of areas affected during particular events remain often imprecise. It was therefore the purpose of this study to reconstruct spatio-temporal patterns of past debris-flow activity in abandoned channels on the forested cone of the Manival torrent (Massif de la Chartreuse, French Prealps). A Light Detecting and Ranging (LiDAR) generated Digital Elevation Model (DEM) was used to identify five abandoned channels and related depositional forms (lobes, lateral levees) in the proximal alluvial fan of the torrent. A total of 156 Scots pine trees ( Pinus sylvestris L.) with clear signs of debris flow events was analyzed and growth disturbances (GD) assessed, such as callus tissue, the onset of compression wood or abrupt growth suppression. In total, 375 GD were identified in the tree-ring samples, pointing to 13 debris-flow events for the period 1931–2008. While debris flows appear to be very common at Manival, they have only rarely propagated outside the main channel over the past 80 years. Furthermore, analysis of the spatial distribution of disturbed trees contributed to the identification of four patterns of debris-flow routing and led to the determination of three preferential breakout locations. Finally, the results of this study demonstrate that the temporal distribution of debris flows did not exhibit significant variations since the beginning of the 20th century.

Description: Development and evaluation of an Earth-system model – HadGEM2 Geoscientific Model Development Discussions, 4, 997-1062, 2011 Author(s): W. J. Collins, N. Bellouin, M. Doutriaux-Boucher, N. Gedney, P. Halloran, T. Hinton, J. Hughes, C. D. Jones, M. Joshi, S. Liddicoat, G. Martin, F. O'Connor, J. Rae, C. Senior, S. Sitch, I. Totterdell, A. Wiltshire, and S. Woodward We describe here the development and evaluation of an Earth system model suitable for centennial-scale climate prediction. The principal new components added to the physical climate model are the terrestrial and ocean ecosystems and gas-phase tropospheric chemistry, along with their coupled interactions. The individual Earth system components are described briefly and the relevant interactions between the components are explained. Because the multiple interactions could lead to unstable feedbacks, we go through a careful process of model spin up to ensure that all components are stable and the interactions balanced. This spun-up configuration is evaluated against observed data for the Earth system components and is generally found to perform very satisfactorily. The reason for the evaluation phase is that the model is to be used for the core climate simulations carried out by the Met Office Hadley Centre for the Coupled Model Intercomparison Project (CMIP5), so it is essential that addition of the extra complexity does not detract substantially from its climate performance. Localised changes in some specific meteorological variables can be identified, but the impacts on the overall simulation of present day climate are slight. This model is proving valuable both for climate predictions, and for investigating the strengths of biogeochemical feedbacks.

Description: Assessment of possible damaged areas due to landslide-induced waves at a constructed reservoir using empirical approaches: Kurtun (North Turkey) Dam reservoir area Natural Hazards and Earth System Science, 11, 1341-1350, 2011 Author(s): A. Akgün Landslide-induced wave in lakes or offshore is a natural hazard of significant concern throughout the world. In Turkey, several dam reservoir areas suffer from this problem, motivating for the exploration of this phenomenon. In this study, the potential for landslide-induced wave generation and the possible adverse effects of such an event were investigated for the Kurtun Dam reservoir area. This area is prone to translational debris-type landslides, and such slides represent a threat with respect to wave generation. To investigate this problem, a potential landslide was initially inspected with respect to key geometrical and index parameters, such as the internal friction angle and unit weight of the landslide material. After obtaining these data, the potential of sub-aerial landslide-induced wave characteristics such as wave height, wave run-up on the opposite slope and wave velocity were calculated using existing empirical relationships. Based on the obtained wave properties, a potential damage assessment was performed for vulnerable areas in recognition of the fact that the Kurtun Dam and Kurtun district are threatened by potential wave occurrence. According to the findings obtained from the potential damage assessment, it was determined that the Kurtun district and the Kurtun portion of the Kurtun-Gumushane highway are located within the run-up impact area. However, the Kurtun Dam was determined to be relatively safe due to the distance between the landslide area and the dam.

Description: The sensitivity of warm period precipitation forecasts to various modifications of the Kain-Fritsch Convective Parameterization scheme Natural Hazards and Earth System Science, 11, 1327-1339, 2011 Author(s): N. Mazarakis, V. Kotroni, K. Lagouvardos, A. A. Argiriou, and C. J. Anderson The sensitivity of quantitative precipitation forecasts to various modifications of the Kain-Fritsch (KF) convective parameterization scheme (CPS) is examined for twenty selected cases characterized by intense convective activity and widespread precipitation over Greece, during the warm period of 2005–2007. The study is conducted using the MM5 model with a two nested domains strategy, with horizontal grid increments of 24 and 8 km, respectively. Five modifications to the KF CPS, each designed to test the sensitivity of the model to the convective scheme formulation, are discussed. The modifications include: (i) the maximization of the convective scheme precipitation efficiency, (ii) the change of the convective time step, (iii) the forcing of the convective scheme to produce more/less cloud material, (iv) changes to the trigger function and (v) the alteration of the vertical profile of updraft mass flux detrainment. The simulated precipitation from the 8-km grid is verified against raingauge measurements. Although skill scores vary widely among the cases and the precipitation thresholds, model results using the modifications of the convective scheme show improvements in 6-h precipitation totals compared to simulations generated using the unmodified convective scheme. In general, forcing the model to produce less cloud material improves the precipitation forecast for the moderate and high precipitation amounts, while the same modification and the change of the convective time step to 1 min has the same result for the high precipitation thresholds. The increase of convective time step to 15 min, the maximization of precipitation efficiency and the changes to the trigger function give similar results for medium and high precipitation. On the other hand, the forecast for the light precipitation is improved by forcing the model to produce more cloud material as well as by the alteration of the vertical profile of updraft mass flux detrainment.

Description: Future changes in European winter storm losses and extreme wind speeds inferred from GCM and RCM multi-model simulations Natural Hazards and Earth System Science, 11, 1351-1370, 2011 Author(s): M. G. Donat, G. C. Leckebusch, S. Wild, and U. Ulbrich Extreme wind speeds and related storm loss potential in Europe have been investigated using multi-model simulations from global (GCM) and regional (RCM) climate models. Potential future changes due to anthropogenic climate change have been analysed from these simulations following the IPCC SRES A1B scenario. The large number of available simulations allows an estimation of the robustness of detected future changes. All the climate models reproduced the observed spatial patterns of wind speeds, although some models displayed systematic biases. A storm loss model was applied to the GCM and RCM simulated wind speeds, resulting in realistic mean loss amounts calculated from 20th century climate simulations, although the inter-annual variability of losses is generally underestimated. In future climate simulations, enhanced extreme wind speeds were found over northern parts of Central and Western Europe in most simulations and in the ensemble mean (up to 5%). As a consequence, the loss potential is also higher in these regions, particularly in Central Europe. Conversely, a decrease in extreme wind speeds was found in Southern Europe, as was an associated reduction in loss potential. There was considerable spread in the projected changes of individual ensemble members, with some indicating an opposite signature to the ensemble mean. Downscaling of the large-scale simulations with RCMs has been shown to be an important source of uncertainty. Even RCMs with identical boundary forcings can show a wide range of potential changes. The robustness of the projected changes was estimated using two different measures. First, the inter-model standard deviation was calculated; however, it is sensitive to outliers and thus displayed large uncertainty ranges. Second, a multi-model combinatorics approach considered all possible sub-ensembles from GCMs and RCMs, hence taking into account the arbitrariness of model selection for multi-model studies. Based on all available GCM and RCM simulations, for example, a 25% mean increase in risk of loss for Germany has been estimated for the end of the 21st century, with a 90% confidence range of +15 to +35%.

Description: Evidence of a previously unrecorded local tsunami, 13 April 2010, Cook Islands: implications for Pacific Island countries Natural Hazards and Earth System Science, 11, 1371-1379, 2011 Author(s): J. Goff Tsunami hazard assessments for Pacific Islands Countries (PICs) tend to focus on subduction zone sources. It is generally recognised that while volcanic-related tsunamigenic sources exist, they are probably only of minor relevance to the overall hazardscape of the Pacific. This paper outlines the evidence for a previously unrecorded local tsunami that struck the uninhabited south coast of Mangaia, Cook Islands, on 13 April 2010. The tsunami had a maximum inundation of 100 m inland and a runup of 12 m a.s.l. This event was most probably caused by a small submarine slope failure, the most recent of an unknown number of previous inundations. Since most PICs have a volcanic origin, it is suggested that current perceptions about the local and regional significance of such events is inaccurate. A review of volcanic-related tsunamigenic sources throughout the Pacific reveals a wealth of data concerning submarine slope failures in particular and a more general background of active volcanism. These sources are as relevant to PICs close to or far away from subduction zones. As populations grow and the coastlines of many PICs and those on the edge of the Pacific Ocean become increasing occupied, the likelihood for loss of life from these events increases.

Description: Active faults crossing trunk pipeline routes: some important steps to avoid disaster Natural Hazards and Earth System Science, 11, 1433-1436, 2011 Author(s): V. M. Besstrashnov and A. L. Strom Assessment of seismic strong motion hazard produced by earthquakes originating within causative fault zones allows rather low accuracy of localisation of these structures that can be provided by indirect evidence of fault activity. In contrast, the relevant accuracy of localisation and characterisation of active faults, capable of surface rupturing, can be achieved solely by the use of direct evidence of fault activity. This differentiation requires strict definition of what can be classified as "active fault" and the normalisation of methods used for identification and localisation of active faults crossing oil and natural gas trunk pipelines.

Description: Regional-scale analysis of lake outburst hazards in the southwestern Pamir, Tajikistan, based on remote sensing and GIS Natural Hazards and Earth System Science, 11, 1447-1462, 2011 Author(s): M. Mergili and J. F. Schneider This paper presents an analysis of the hazards emanating from the sudden drainage of alpine lakes in South-Western Tajik Pamir. In the last 40 yr, several new lakes have formed in the front of retreating glacier tongues, and existing lakes have grown. Other lakes are dammed by landslide deposits or older moraines. In 2002, sudden drainage of a glacial lake in the area triggered a catastrophic debris flow. Building on existing approaches, a rating scheme was devised allowing quick, regional-scale identification of potentially hazardous lakes and possible impact areas. This approach relies on GIS, remote sensing and empirical modelling, largely based on medium-resolution international datasets. Out of the 428 lakes mapped in the area, 6 were rated very hazardous and 34 hazardous. This classification was used for the selection of lakes requiring in-depth investigation. Selected cases are presented and discussed in order to understand the potentials and limitations of the approach used. Such an understanding is essential for the appropriate application of the methodology for risk mitigation purposes.

Description: Perturbation of convection-permitting NWP forecasts for flash-flood ensemble forecasting Natural Hazards and Earth System Science, 11, 1529-1544, 2011 Author(s): B. Vincendon, V. Ducrocq, O. Nuissier, and B. Vié Mediterranean intense weather events often lead to devastating flash-floods. Extending the forecasting lead times further than the watershed response times, implies the use of numerical weather prediction (NWP) to drive hydrological models. However, the nature of the precipitating events and the temporal and spatial scales of the watershed response make them difficult to forecast, even using a high-resolution convection-permitting NWP deterministic forecasting. This study proposes a new method to sample the uncertainties of high-resolution NWP precipitation forecasts in order to quantify the predictability of the streamflow forecasts. We have developed a perturbation method based on convection-permitting NWP-model error statistics. It produces short-term precipitation ensemble forecasts from single-value meteorological forecasts. These rainfall ensemble forecasts are then fed into a hydrological model dedicated to flash-flood forecasting to produce ensemble streamflow forecasts. The verification on two flash-flood events shows that this forecasting ensemble performs better than the deterministic forecast. The performance of the precipitation perturbation method has also been found to be broadly as good as that obtained using a state-of-the-art research convection-permitting NWP ensemble, while requiring less computing time.

Description: Geomorphological and geochemical characterization of the 11 August 2008 mud volcano eruption at S. Barbara village (Sicily, Italy) and its possible relationship with seismic activity Natural Hazards and Earth System Science, 11, 1545-1557, 2011 Author(s): P. Madonia, F. Grassa, M. Cangemi, and C. Musumeci On 11 August 2008 a paroxysmal eruption occurred at Santa Barbara mud volcano (MV), located close to Caltanissetta, one of the most densely populated cities of Sicily (Italy). An associated minor event took place on August 2009. Both the events caused severe damage to civil infrastructures located within a range of about 2 km from the eruptive vent. Geomorphological, geochemical, and seismological investigations were carried out for framing the events in the appropriate geodynamic context. Geomorphological surveys recognized, in the immediate surrounding of the main emission point, two different families of processes and landforms: (i) ground deformations and (ii) changes in morphology and number of the fluid emitting vents. These processes were associated to a wider network of fractures, seemingly generated by the shock wave produced by the gas blast that occurred at the main paroxysm. Geochemical characterization allowed an estimation of the source of the fluids, or at least their last standing, at about 3 km depth. Finally, the close time relationships observed between anomalous increments of seismic activity and the two main paroxysmal events accounted for a possible common trigger for both the phenomena, even with different timing due to the very different initial conditions and characteristics of the two processes, i.e. seismogenesis and gas overloading.

Description: Open Plot Project: an open-source toolkit for 3-D structural data analysis Solid Earth, 2, 53-63, 2011 Author(s): S. Tavani, P. Arbues, M. Snidero, N. Carrera, and J. A. Muñoz In this work we present the Open Plot Project, an open-source software for structural data analysis, including a 3-D environment. The software includes many classical functionalities of structural data analysis tools, like stereoplot, contouring, tensorial regression, scatterplots, histograms and transect analysis. In addition, efficient filtering tools are present allowing the selection of data according to their attributes, including spatial distribution and orientation. This first alpha release represents a stand-alone toolkit for structural data analysis. The presence of a 3-D environment with digitalising tools allows the integration of structural data with information extracted from georeferenced images to produce structurally validated dip domains. This, coupled with many import/export facilities, allows easy incorporation of structural analyses in workflows for 3-D geological modelling. Accordingly, Open Plot Project also candidates as a structural add-on for 3-D geological modelling software. The software (for both Windows and Linux O.S.), the User Manual, a set of example movies (complementary to the User Manual), and the source code are provided as Supplement. We intend the publication of the source code to set the foundation for free, public software that, hopefully, the structural geologists' community will use, modify, and implement. The creation of additional public controls/tools is strongly encouraged.

Description: Moraine-dammed lake failures in Patagonia and assessment of outburst susceptibility in the Baker Basin Natural Hazards and Earth System Science, 14, 3243-3259, 2014 Author(s): P. Iribarren Anacona, K.P. Norton, and A. Mackintosh Glacier retreat since the Little Ice Age has resulted in the development or expansion of hundreds of glacial lakes in Patagonia. Some of these lakes have produced large (≥ 10 6 m 3 ) Glacial Lake Outburst Floods (GLOFs) damaging inhabited areas. GLOF hazard studies in Patagonia have been mainly based on the analysis of short-term series (≤ 50 years) of flood data and until now no attempt has been made to identify the relative susceptibility of lakes to failure. Power schemes and associated infrastructure are planned for Patagonian basins that have historically been affected by GLOFs, and we now require a thorough understanding of the characteristics of dangerous lakes in order to assist with hazard assessment and planning. In this paper, the conditioning factors of 16 outbursts from moraine-dammed lakes in Patagonia were analysed. These data were used to develop a classification scheme designed to assess outburst susceptibility, based on image classification techniques, flow routine algorithms and the Analytical Hierarchy Process. This scheme was applied to the Baker Basin, Chile, where at least seven moraine-dammed lakes have failed in historic time. We identified 386 moraine-dammed lakes in the Baker Basin of which 28 were classified with high or very high outburst susceptibility. Commonly, lakes with high outburst susceptibility are in contact with glaciers and have moderate (〉 8°) to steep (〉 15°) dam outlet slopes, akin to failed lakes in Patagonia. The proposed classification scheme is suitable for first-order GLOF hazard assessments in this region. However, rapidly changing glaciers in Patagonia make detailed analysis and monitoring of hazardous lakes and glaciated areas upstream from inhabited areas or critical infrastructure necessary, in order to better prepare for hazards emerging from an evolving cryosphere.

Description: A multi-layer land surface energy budget model for implicit coupling with global atmospheric simulations Geoscientific Model Development Discussions, 7, 8649-8701, 2014 Author(s): J. Ryder, J. Polcher, P. Peylin, C. Ottlé, Y. Chen, E. van Gorsel, V. Haverd, M. J. McGrath, K. Naudts, J. Otto, A. Valade, and S. Luyssaert In Earth system modelling, a description of the energy budget of the vegetated surface layer is fundamental as it determines the meteorological conditions in the planetary boundary layer and as such contributes to the atmospheric conditions and its circulation. The energy budget in most Earth system models has long been based on a "big-leaf approach", with averaging schemes that represent in-canopy processes. Such models have difficulties in reproducing consistently the energy balance in field observations. We here outline a newly developed numerical model for energy budget simulation, as a component of the land surface model ORCHIDEE-CAN (Organising Carbon and Hydrology In Dynamic Ecosystems – CANopy). This new model implements techniques from single-site canopy models in a practical way. It includes representation of in-canopy transport, a multilayer longwave radiation budget, height-specific calculation of aerodynamic and stomatal conductance, and interaction with the bare soil flux within the canopy space. Significantly, it avoids iterations over the height of tha canopy and so maintains implicit coupling to the atmospheric model LMDz. As a first test, the model is evaluated against data from both an intensive measurement campaign and longer term eddy covariance measurements for the intensively studied Eucalyptus stand at Tumbarumba, Australia. The model performs well in replicating both diurnal and annual cycles of fluxes, as well as the gradients of sensible heat fluxes. However, the model overestimates sensible heat flux against an underestimate of the radiation budget. Improved performance is expected through the implementation of a more detailed calculation of stand albedo and a more up-to-date stomatal conductance calculation.

Description: Epic landslide erosion from mountain roads in Yunnan, China – challenges for sustainable development Natural Hazards and Earth System Science, 14, 3093-3104, 2014 Author(s): R. C. Sidle, M. Ghestem, and A. Stokes Expanding systems of mountain roads in developing countries have significantly increased the risk of landslides and sedimentation, and have created vulnerabilities for residents and aquatic resources. We measured landslide erosion along seven road segments in steep terrain in the upper Salween River basin, Yunnan, China and estimated sediment delivery to channels. Landslide erosion rates along the roads ranged from 2780 to 48 235 Mg ha −1 yr −1 , the upper end of this range being the highest rate ever reported along mountain roads. The two roads with the highest landslide erosion (FG1 = 12 966 Mg ha −1 yr −1 ; DXD = 48 235 Mg ha −1 yr −1 ) had some of the highest sediment delivery rates to channels (about 80 and 86%, respectively). Overall, 3 times more landslides occurred along cut slopes compared to fill slopes, but fill slope failures had a combined mass 〉 1.3 times that of cut slope failures. Many small landslides occurred along road cuts, but these were often trapped on the road surface. Given the magnitude of the landslide problem and the lack of attention to this issue, a more sustainable approach for mountain road development is outlined based on an analysis of landslide susceptibility and how thresholds for landslide trigger mechanisms would be modified by road location and different construction techniques.

Description: Evaluation of forest fire models on a large observation database Natural Hazards and Earth System Science, 14, 3077-3091, 2014 Author(s): J. B. Filippi, V. Mallet, and B. Nader This paper presents the evaluation of several fire propagation models using a large set of observed fires. The observation base is composed of 80 Mediterranean fire cases of different sizes, which come with the limited information available in an operational context (burned surface and approximative ignition point). Simulations for all cases are carried out with four different front velocity models. The results are compared with several error scoring methods applied to each of the 320 simulations. All tasks are performed in a fully automated manner, with simulations run as first guesses with no tuning for any of the models or cases. This approach leads to a wide range of simulation performance, including some of the bad simulation results to be expected in an operational context. Disregarding the quality of the input data, it is found that the models can be ranked based on their performance and that the most complex models outperform the more empirical ones. Data and source codes used for this paper are freely available to the community.

Description: Interpretative modelling of a geological cross section from boreholes: sources of uncertainty and their quantification Solid Earth, 5, 1189-1203, 2014 Author(s): R. M. Lark, S. Thorpe, H. Kessler, and S. J. Mathers We conducted a designed experiment to quantify sources of uncertainty in geologists' interpretations of a geological cross section. A group of 28 geologists participated in the experiment. Each interpreted borehole record included up to three Palaeogene bedrock units, including the target unit for the experiment: the London Clay. The set of boreholes was divided into batches from which validation boreholes had been withheld; as a result, we obtained 129 point comparisons between the interpreted elevation of the base of the London Clay and its observed elevation in a borehole not used for that particular interpretation. Analysis of the results showed good general agreement between the observed and interpreted elevations, with no evidence of systematic bias. Between-site variation of the interpretation error was spatially correlated, and the variance appeared to be stationary. The between-geologist component of variance was smaller overall, and depended on the distance to the nearest borehole. There was also evidence that the between-geologist variance depends on the degree of experience of the individual. We used the statistical model of interpretation error to compute confidence intervals for any one interpretation of the base of the London Clay on the cross section, and to provide uncertainty measures for decision support in a hypothetical route-planning process. The statistical model could also be used to quantify error propagation in a full 3-D geological model produced from interpreted cross sections.

Description: Tunable diode laser measurements of hydrothermal/volcanic CO 2 and implications for the global CO 2 budget Solid Earth, 5, 1209-1221, 2014 Author(s): M. Pedone, A. Aiuppa, G. Giudice, F. Grassa, V. Francofonte, B. Bergsson, and E. Ilyinskaya Quantifying the CO 2 flux sustained by low-temperature fumarolic fields in hydrothermal/volcanic environments has remained a challenge, to date. Here, we explored the potential of a commercial infrared tunable laser unit for quantifying such fumarolic volcanic/hydrothermal CO 2 fluxes. Our field tests were conducted between April 2013 and March 2014 at Nea Kameni (Santorini, Greece), Hekla and Krýsuvík (Iceland) and Vulcano (Aeolian Islands, Italy). At these sites, the tunable laser was used to measure the path-integrated CO 2 mixing ratios along cross sections of the fumaroles' atmospheric plumes. By using a tomographic post-processing routine, we then obtained, for each manifestation, the contour maps of CO 2 mixing ratios in the plumes and, from their integration, the CO 2 fluxes. The calculated CO 2 fluxes range from low (5.7 ± 0.9 t d −1 ; Krýsuvík) to moderate (524 ± 108 t d −1 ; La Fossa crater, Vulcano). Overall, we suggest that the cumulative CO 2 contribution from weakly degassing volcanoes in the hydrothermal stage of activity may be significant at the global scale.

Description: Ionospheric variations before some large earthquakes over Sumatra Natural Hazards and Earth System Science, 11, 597-611, 2011 Author(s): A. M. Hasbi, M. A. Mohd Ali, and N. Misran The paper investigates the ionospheric variations before some large earthquakes that occurred during 2004–2007 in Sumatra using GPS and CHAMP data. The TEC shows the occurrence of positive and negative anomalies detected within a few hours to 6 days before the earthquakes. These anomalies mostly occur during the daytime hours between 4 and 17 LT. The TEC anomalies are mostly consistent with the CHAMP satellite electron density data. The electron density analysis over the 28 March 2005 earthquake epicenter shows that an equatorial anomaly modification took place a few days before the event. The modification took shape in the form of crest amplification during the daytime. The comparison between the TEC and electron density measurements during very quiet geomagnetic conditions is shown to be a useful indicator of a forthcoming earthquake.

Description: Critical analysis of the electrostatic turbulence enhancements observed by DEMETER over the Sichuan region during the earthquake preparation Natural Hazards and Earth System Science, 11, 561-570, 2011 Author(s): T. Onishi, J.-J. Berthelier, and M. Kamogawa In this paper, we report initial results from a detailed statistical study of the plasma waves observed by the DEMETER satellite over the Sichuan region during a period of 20 days encompassing the large earthquake of magnitude M =7.9 that occurred on 12 May 2008. The main objective of this paper is to present a statistical method to process and analyze plasma wave data and assist in detecting possible earthquake precursors among larger irregular disturbances arising from the natural variability of the ionized environment of the Earth. This method, presently used for dayside observations, involves two stages. First, VLF wave spectra are processed to recognize the various types of plasma waves usually observed at mid and low latitudes and derive a reduced number of parameters that fully characterize these emissions and may be conveniently used for a detailed statistical study. In a second stage, we perform a statistical analysis of the results by taking into account two "reference zones" displaced respectively 30 ° eastward and westward from the "epicentre zone". Plasma and wave disturbances possibly induced by earthquakes in preparation are likely to maximize close to the "epicentre zone", while natural disturbances associated, in particular, with the varying magnetic activity are rather uniform over a wider longitude sector, thus enabling the use of observations over the reference zones as a base line. The initial results of this study show a deviation of the power spectrum of electrostatic turbulence in the epicentre zone about 6 days prior to the earthquake but no significant anomalous variations can be observed on other characteristics of plasma waves. From the analysis of the data over the two reference~zones and using recently produced sector magnetic activity indices, we conclude that the enhancement of electrostatic turbulence is associated with magnetospheric processes rather than with pre-seismic activity.