ALBERT

Description: Heat integration and industrial symbiosis have been identified as key strategies to foster energy efficient and low carbon manufacturing industries (see e.g. contribution of Working Group III in IPCC's 5th assessment report). As energy efficiency potentials through horizontal and vertical integration are highly specific by site and technology they are often not explicitly reflected in national energy strategies and GHG emission scenarios. One of the reasons is that the energy models used to formulate such macro-level scenarios lack either the necessary high technical or the spatial micro-level resolution or both. Due to this lack of adequate tools the assumed huge existing potentials for energy efficiency in the energy intensive industry cannot be appropriately appreciated by national or EU level policies. Due to this background our paper describes a recent approach for a combined micro-macro energy model for selected manufacturing industries. It combines national level technical scenario modelling with a micro-modelling approach analogous to total site analysis (TSA), a methodology used by companies to analyse energy integration potentials on the level of production sites. Current spatial structures are reproduced with capacity, technical and energy efficiency data on the level of single facilities (e.g. blast furnaces) using ETS data and other sources. Based on this, both, the investments in specific technologies and in production sites are modelled and the evolvement of future structures of (interconnected) industry sites are explored in scenarios under different conditions and with different objectives (microeconomic vs. energy efficiency optimization). We further present a preliminary scenario that explores the relevance of these potentials and developments for the German steel industry.

Description: The German federal state of North Rhine-Westphalia (NRW) is home to important clusters of energy-intensive basic materials industries. 15% of the EU's primary steel as well as 15% of high-value base chemicals are produced here. Together with refinery fuels, cement, lime and paper production (also overrepresented in NRW) these are the most carbon-intensive production processes of the industrial metabolism. To achieve the ambitious regional and national climate goals without relocating these clusters, carbon-neutral production will have to become standard by mid-century. We develop and evaluate three conceptual long-term scenarios towards carbon-neutral industry systems for NRW for 2050 and beyond: * a first scenario depending on carbon capture and storage or use for heavy industries (iCCS), * a second scenario sketching the direct electrification of industrial processes (and transport) and * a third scenario relying on the import of low carbon energies (e.g. biomass, and synthetic fuels (like methanol) for the use in industries and transport. All scenarios share the assumption that electricity generation will be CO2-neutral by 2050. For all three scenarios energy efficiency, primary energy demand for energy services and feedstock as well as the carbon balance are quantified. We apply a spatial-explicit analysis of production sites to allow for discussion of infrastructure re-use and net investment needs. Possible symbiotic relations between sectors are also included. The robustness of the three conceptualised future carbon-neutral industry systems is then analysed using a multi-criteria approach, including e.g. energy security issues and lock-ins on the way to 2050.

Description: There is an increasing pressure that enhanced and novel energy technologies are swiftly adopted by the market to ensure meeting the energy and climate targets. An important issue with such novel developments is their risk to be stuck in the "valley of death", i.e. that their transition to the market is delayed or unsuccessful. Publicly supported demonstration projects could help to bridge the valley of death by reducing barriers to the adoption caused by missing information and perceived risks. A challenge for technology demonstrations in the industrial context is their often high investments that are required to prove their real-world benefits. Given the magnitude of such investments, it becomes crucial that public funding focuses on the most promising demonstration proposals. Structured evaluation processes can help to facilitate the identification of promising proposals and to improve the quality and transparency of decisions. This paper deals with a corresponding multi-staged multi-criteria decision support system (DSS) suggested to the German Federal Ministry for Economic Affairs and Energy. It deals with the evaluation of demonstration proposals across three stages: The first stage represents a filtering stage to identify those proposals relevant for further considerations. The second stage comprises a multi-criteria scoring method drawing on an evaluation against nineteen criteria. The final third stage serves to critically review the need for public funding of well-scored proposals. This contribution outlines the development of the DSS and its design and thus provides insights on proposal evaluating in energy research.

Description: Contemporary combined heat and power (CHP) systems are often based on fossil fuels, such as natural gas or heating oil. Thereby, small-scale cogeneration systems are intended to replace or complement traditional heating equipment in residential buildings. In addition to space heating or domestic hot water supply, electricity is generated for the own consumption of the building or to be sold to the electric power grid. The adaptation of CHP-systems to renewable energy sources, such as solid biomass applications is challenging, because of feedstock composition and heat integration. Nevertheless, in particular smallscale CHP technologies based on biomass gasification and solid oxide fuel cells (SOFCs) offer significant potentials, also regarding important co-benefits, such as security of energy supply as well as emission reductions in terms of greenhouse gases or air pollutants. Besides emission or air quality regulations, the development of CHP technologies for clean on-site small-scale power generation is also strongly incentivised by energy efficiency policies for residential appliances, such as e.g. Ecodesign and Energy Labelling in the European Union (EU). Furthermore, solid residual biomass as renewable local energy source is best suited for decentralised operations such as micro-grids, also to reduce long-haul fuel transports. By this means such distributed energy resource technology can become an essential part of a forward-looking strategy for net zero energy or even smart plus energy buildings. In this context, this paper presents preliminary impact assessment results and most recent environmental considerations from the EU Horizon 2020 project "FlexiFuel-SOFC" (Grant Agreement no. 641229), which aims at the development of a novel CHP system, consisting of a fuel flexible smallscale fixed-bed updraft gasifier technology, a compact gas cleaning concept and an SOFC for electricity generation. Besides sole system efficiencies, in particular resource and emission aspects of solid fuel combustion and net electricity effects need to be considered. The latter means that vastly less emission intensive gasifier-fuel cell CHP technologies cause significant less fuel related emissions than traditional heating systems, an effect which is further strengthened by avoided emissions from more emission intensive traditional grid electricity generation. As promising result, operation "net" emissions of such on-site generation installations may be virtually zero or even negative. Additionally, this paper scopes central regulatory instruments for small-scale CHP systems in the EU to discuss ways to improve the framework for system deployment.

Description: In addition to the expansion of renewable energies, the efficient use of energy is crucial in order to ensure energy transition successful. The Federal Government of Germany has therefore set itself clear objectives with the National Energy Efficiency Action Plan (NAPE), which aims to reduce the primary energy consumption in Germany - compared to 2008 levels - by 20 per cent until 2020, and by 50 per cent until 2050. In addition, greenhouse gas emissions should fall by 40 per cent compared to 1990. To reach this goal, the German Federal Ministry of Economic Affairs and Energy (BMWi) inter alia launched the "National Top Runner Initiative (NTRI)" in January 2016. It is an important component and concerns private homes, as well as industry, retail and services. The NTRI is intended to bring energy efficient and high-quality appliances (so called Top Runners) onto the market more quickly, thus accelerate market replacement. For this purpose, motivation, knowledge and competence in product-related energy efficiency is to be strengthened and expanded along the whole value chain - from the appliance manufacturer to the retailer and the consumer. Manufacturers are pushed to develop more efficient products and consumers get valuable information about Top-Runner products and how they can benefit. In this context, retailers are especially relevant as they act as "gatekeeper" between manufacturers and consumers. They play a key role in advancing an energy efficient production and consumption. They do not only select the products but they also have a direct contact to consumers and influence the purchase decision. In this paper, special emphasis will be put on the role of retailers and the efforts of the National Top Runner Initiative will be illustrated. Barriers and incentives to motivate this target group will be elaborated.

Description: Renewable energy plays a key role in the sustainable pathway towards a low carbon future and, despite new supply capacities, the transformation of the energy system also requires the adoption of a method which allows for the integration of increasing amounts of renewable energy. This requires a transition to more flexible processes at an industrial level and demand side management (DSM) is one possible way of achieving this transition. Currently, increased shares of variable renewable energy can cause the electricity supply to become more volatile and result in changes to the electricity market. In order to develop a new dynamic equilibrium to balance supply and demand, sufficient flexibility in demand is required. As adequate storage systems are not available in the short to medium term, the potential for large electricity consumers to operate flexibly is an attractive, pragmatic and feasible option. Recent studies in Germany suggest that there is significant potential for DSM in so-called "energy-intensive industries". However, the figures (which fall in the approximate range of 1,250-2,750 MW positive and 400-1,300 MW negative shiftable load) should be interpreted with caution. The range of industrial processes considered are diverse and vary from plant to plant, with the result that it is difficult to provide accurate calculations of the accumulated potential for Germany or the EU as a whole. Based on extensive surveys and panel discussions with representatives from energy-intensive industries (aluminum, cement, chemicals, iron & steel, pulp & paper), which together account for approximately one third of the industrial electricity demand in Germany, our paper provides an overview of both the opportunities and the barriers faced by DSM. One of the key findings is the possible loss in energy efficiency due to DSM: in order to decrease or increase production depending on the stability needs of the electricity system, plants and processes may no longer operate at their optimum levels. The effects on downstream production must also be taken into account in order to gain a more complete understanding of the overall effects of industrial DSM.

Description: The Port of Rotterdam is an important industrial cluster mainly comprising of oil refining, chemical manufacturing and power and steam generation. In 2015, the area accounted for 18 % of the Netherlands' total CO2 emissions. The Port of Rotterdam Authority is aware that the port's economy is heavily exposed to future global and EU decarbonization policies, as the bulk of its activities focuses on trading, handling, converting and using fossil fuels. Based on a study for the Port Authority, our paper explores possible pathways of how the industrial cluster can keep its strong market position in Europe and still reduce its CO2 emissions by 98 % by 2050. The "Biomass and CCS" scenario assumes that large amounts of biomass can be supplied sustainably and will be used in the port for power generation as well as for feedstock for refineries and the chemical industry. Fischer-Tropsch fuel generation plays an important role in this scenario, allowing the port to become a key cluster for the production of synthetic fuels and feedstocks in Western Europe. The "Closed Carbon Cycle" scenario assumes that renewables-based electricity will be used at the port to supply heat and hydrogen for the synthetic generation of feedstock for the chemical industry. The carbon required for the chemicals will stem from recycled waste. Technologies particularly needed in this scenario are water electrolysis and gasification or pyrolysis to capture carbon from waste, as well as technologies for the production of base chemicals from syngas. The paper compares both scenarios with regard to their respective technological choices and infrastructural changes. The scenarios’ particular opportunities and challenges are also discussed. Using possible future pathways of a major European petrochemical cluster as an example, the paper illustrates options for deep decarbonisation of energy intensive industries in the EU and beyond.

Description: Converting electricity into heat offers the opportunity to make of use large scales of renewable (surplus) energy in the long run in order to reduce shut-downs of renewable power plants and to substitute fossil fuels. Electrification seems to be also very promising for industrial heat applications, as it enables high process temperatures to be achieved in a tailor-made and efficient way and enables the utilisation of other energy sources like waste heat, geothermal or ambient heat (via heat pumps). This article analyses theoretical and technical electrification potentials of Steam Generation and Other Process Heat Generation in the following energy-intensive branches: iron & steel, non-ferrous metal, iron foundries, refineries, base chemicals, glass, cement clinker and paper industry in Germany. Literature research, expert interviews as well as own modelling were conducted to determine potentials and their implementation barriers. Based on these methods, market potential to electrify industrial steam generation was estimated. On the basis of two climate protection scenarios, the effects of both a monovalent and a hybrid industrial power-to-heat strategy were quantified with regard to greenhouse gas reduction and energy efficiency (primary energy saving). The pathway towards electrification will be reflected by criteria such as path dependency, dependency of infrastructure and system compatibility. Recommendations for research and development as well as policies are derived from the overall analysis. The article shows that electrification can be an important option to achieving high CO2-savings in the industrial heating sector in a long-term perspective. However, the scenario calculations show that electrification does not in itself guarantee reduction of greenhouse gases or savings of primary energy. To reach these goals, it is essential to further develop industrial heat pumps and to map electrification and further development of renewable energy (including infrastructure such as power networks and storage facilities) in a concerted strategy.

Description: The study "Towards a Single and Innovative European Transport System" is developing action plans for the establishment of an integrated transport system in Europe. This report was created in a joint effort between VDI/VDE Innovation + Technik GmbH (Germany), Wuppertal Institute for Climate, Environment and Energy (Germany) and the Centre of Research and Technology Hellas, CERTH (Greece) on behalf of the European Commission's DG MOVE. Focus of the report is the international assessment of six different countries - Brazil, China, India, Japan, South Korea, USA - in five focus areas across all transportation modes. It provides actions plans on how to overcome existing European barriers towards a single and innovative European Transport System based on best practices and lessons learned in the countries under study. In addition to the actions plans, the study also provides recommendations for international collaboration.

Description: Following the decisions of the Paris climate conference at the end of 2015 as well as similar announcements e.g. from the G7 in Elmau (Germany) in the summer of 2015, long-term strategies aiming at (almost) full decarbonisation of the energy systems increasingly move into the focus of climate and energy policy. Deep decarbonisation obviously requires a complete switch of energy supply towards zero GHG emission sources, such as renewable energy. A large number of both global as well as national climate change mitigation scenarios emphasize that energy efficiency will likewise play a key role in achieving deep decarbonization. However, the interdependencies between a transformation of energy supply on the one hand and the role of and prospects for energy efficiency on the other hand are rarely explored in detail. This article explores these interdependencies based on a scenario for Germany that describes a future energy system relying entirely on renewable energy sources. Our analysis emphasizes that generally, considerable energy efficiency improvements on the demand side are required in order to have a realistic chance of transforming the German energy system towards 100 % renewables. Efficiency improvements are especially important if energy demand sectors will continue to require large amounts of liquid and gaseous fuels, as the production of these fuels are associated with considerable energy losses in a 100 % renewables future. Energy efficiency on the supply side will therefore differ considerably depending on how strongly the use of liquid and gaseous fuels in the various demand sectors can be substituted through the direct use of electricity. Apart from a general discussion of the role of energy efficiency in a 100 % renewable future, we also look at the role of and prospects for energy efficiency in each individual demand sector.

Description: The core objective of Energy Efficiency Watch 3 (EEW3) is to establish a constant feedback loop on the implementation of European and national energy efficiency policies and thus enable both compliance monitoring and mutual learning on effective policy making across the EU. The project team applied a mixed-method approach to assess energy efficiency policy developments in EU Member States. It analysed progress of national policies by screening official documents, sought experts' knowledge via an EU-wide survey and has been creating new consultation platforms with a wide spectrum of stakeholders including parliamentarians, regions, cities and business stakeholders. Analysis of the National Energy Efficiency Action Plans (NEEAPs), the expert survey with input from over 1,100 experts on policy ambition and progress in each Member State, as well as 28 Country Reports have been central elements in EEW3. This paper will present the main conclusions and policy recommendations of EEW3. In doing so, it will first summarise the findings of the document analysis based on the 28 Country Reports, showing developments of energy efficiency policies since the second NEEAP in 2011 in a cross-country overview for six sectors. These findings are then contrasted with the experts' perspective on progress in energy efficiency policies in their countries as collected in the EEW survey. Moreover, ten case studies of good practice energy efficiency policies are shown, three of them will be presented in more detail. The paper ends with key policy conclusions for improving the effectiveness of European energy efficiency policies. A key finding is that policy implementation has improved a lot since 2011 but more is needed to achieve the EED Art. 7 and other targets.

Description: One of the most pressing issues of climate policy is how to get building owners to invest in the energy efficiency of their homes. The German federal government has set the goal of decreasing the energy demand of buildings by 80 to 95 percent until 2050. One pillar of the strategy to support building owners in this task is the provision of targeted energy advice, to both motivate owners to implement an energy efficiency refurbishment and help them to choose the most efficient measures. In this paper we analysed the demand for energy advice in three German cities of the Ruhr area finding the number of energy consulting provided to be extremely low compared to the stated goals. Based on the approach of joint knowledge production we invited stakeholders from the three cities to participate in a series of workshops in order to develop ideas how to more effectively bring homeowners and energy advisors together. As a result, different energy advice experiments were co-operatively developed for each city targeting different groups by using tailored channels for outreach. The evaluation of both the process as well as the outcome of the experiments indicates that while joint knowledge production is a suitable approach to enable knowledge transfer and formation of new networks between different stakeholders in science and practice, it does not necessarily lead to superior approaches with regard to effectively addressing a policy issue at hand. Apart from the experiment in which the window of opportunity change of building ownership was taken advantage of, participation of target groups in the experiments has been soberingly low, underlining the value of so-called trigger points when designing effective outreach strategies to building owners.

Description: Energy efficiency improvements have numerous benefits/impacts additional to energy and greenhouse gas savings, as has been shown and analysed e.g. in the 2014 IEA Report on "Multiple Benefits of Energy Efficiency". This paper presents the Horizon 2020-project COMBI ("Calculating and Operationalising the Multiple Benefits of Energy Efficiency in Europe"), aiming at calculating the energy and non-energy impacts that a realisation of the EU energy efficiency potential would have in 2030. The project covers the most relevant technical energy efficiency improvement actions and estimates impacts of reduced air pollution (and its effects on human health, eco-systems/crops, buildings), improved social welfare (incl. disposable income, comfort, health, productivity), saved biotic and abiotic resources, and energy system, energy security, and the macroeconomy (employment, economic growth and public budget). This paper explains how the COMBI energy savings potential in the EU 2030 is being modelled and how multiple impacts are assessed. We outline main challenges with the quantification (choice of baseline scenario, additionality of savings and impacts, context dependency and distributional issues) as well as with the aggregation of impacts (e.g. interactions and overlaps) and how the project deals with them. As research is still ongoing, this paper only gives a first impression of the order of magnitude for additional multiple impacts of energy efficiency improvements may have in Europe, where this is available to date. The paper is intended to stimulate discussion and receive feedback from the academic community on quantification approaches followed by the project.

Description: A case study in the rural area of South Westphalia, Germany, showed the importance of independent intermediaries to support the development and implementation of sustainable energy and efficiency projects. The idea behind the project "Dorf ist Energie(klug)" (Village is Energy(smart)) was to foster, accompany, and support energy and efficiency projects in villages from the first idea to final implementation. Therefore, the South Westphalia Agency as independent intermediary initiated an application process in which villages could apply with their innovative energy and efficiency project ideas. During the following process the chosen "coaching villages" benefitted from the consultation of teams of thematic experts. Villages with less developed projects were supported through idea workshops with experts and study visits. The accompanying scientific study evaluated the overall process focussing on the transferability, the sustainability and the quality of the process. Furthermore, a self evaluation tool for (energy) projects in villages was developed and tested in two of the participating coaching villages. The paper gives a short insight into the project "Dorf ist Energie(klug)". It presents the methodology of the accompanying study and the results with a special focus on the role of the South Westphalia Agency as independent intermediary. Finally, it discusses the transferability and sustainability of the project.

Description: Energy sufficiency has recently gained increasing attention as a way to limit and reduce total energy consumption of households and overall. This paper presents selected results of a research project funded by the German Federal Ministry of Education and Research that examined the potentials and barriers for energy sufficiency with a focus on electricity in households, how household members perceive sufficiency practices, and how policymakers could support and encourage these. Bottom-up calculations for an average 2-person household in Germany yielded a total electricity savings potential from energy efficiency and sufficiency combined of theoretically up to 75 %. The continuous growth of per capita living space was identified as one important driver for additional energy consumption both for heat and electricity. The paper will present findings of a representative survey of 600 persons responsible for the housework. It revealed that a part of the households is already practicing sufficiency options or are open towards these. Up to 30 % of these households can imagine, given the right conditions and policy support, to move to a smaller dwelling or to share an apartment with others when they are older. Results of a first comprehensive analysis of an energy sufficiency policy to encourage and support households to sufficiency practices form the second part of the paper, with a focus on the feasibility and potential effectiveness of instruments for limiting the growth in average living space per person. This includes a case study on fostering communal housing projects as a measure to reduce living space. Further, the feasibility of a cap scheme for the total electricity sales of a supplier to its customers was examined. Instruments supporting energy-efficient and sufficient purchase and use of equipment complete the integrated energy sufficiency and efficiency policy package. The paper will finally present the project's conclusions on an integrated energy sufficiency policy package resulting from this analysis.

Description: Energy efficiency activities are high on the current EU energy policy agenda. Key policy instruments like the Energy Efficiency Directive (EED), the Energy Performance of Buildings Directive (EPBD) and the Energy Labelling Directive are under revision. In a project for the German government, we therefore analysed the effectiveness and consistency of existing sectoral policy packages anew, to open the discussion on which policy changes to the EU's energy efficiency policy packages are crucial to reach the targets. This comprehensive review addressed the industrial, buildings, and transport sectors plus the overarching governance framework (targets and roadmaps, EED, energy taxation and EU ETS). For each of these, the first step was a gap analysis of the main deficits in the sectoral policy packages, against effective model packages. At first glance, the combination of energy efficiency policies at EU level seems already quite comprehensive. However, their design and implementation often lack a consistent and ambitious approach to leverage their full potential. To give some examples of the many shortcomings identified, the governance framework suffers from exceptions and the transport sector being only marginally considered in the EED; an outdated Energy Tax Directive has very low minimum rates and several exception clauses; there is a lack of commitment to implement energy management systems and investment projects in large companies; a clear EU-wide definition of nearly zero energy buildings (nZEB) is missing; and the labelling of energy-using products is still confusing for consumers. Subsequently, we elaborated comprehensive policy recommendations to increase the effectiveness of all these policies, and to bridge some gaps with new policies. A list of priorities was established to sort them by their relevance.

Description: Energy intensive industries are one of the fields in which strong increases of energy efficiency and deep decarbonisation strategies are particularly challenging. Although European energy intensive industries have already achieved significant energy and greenhouse gas reductions in the past, much remains to be done to make a significant contribution to achieving European as well as national climate mitigation targets of greenhouse gas emission reductions by -80% or more (compared to the baseline of 1990). North Rhine-Westphalia (NRW) is a European hotspot for coping with this challenge, accommodating more than 10% of the energy intensive industries of the EU28. It is also the first German state to have adopted its own Climate Law, enacting state-wide CO2 emission reductions by 80% until 2050 compared to 1990. The state government initiated the project "Platform Climate Protection and Industry North-Rhine Westphalia" to identify and develop the necessary far-reaching low carbon innovation strategies for energy intensive industries. Heart of the project was a dialogue process, which involved a broad spectrum of stakeholders from steel, chemical, aluminium, cement, glass and paper producing industries. Besides enhancing and broadening the knowledge on high efficiency and low-carbon technologies within industries, the aim was to explore possible pathways and preconditions for the application of these technologies in energy intensive industries as well as to strengthen the motivation of companies for initiatives and investments in technologies with lower CO2 emissions. The results of the dialogue shall provide a basis for a possible low-carbon industry roadmap NRW and may also serve as an example for other industrialized regions in the EU and globally. The paper sketches the structured dialogue process with the stakeholders from companies as well as industrial associations and presents the learnings regarding the engagement of energy intensive industries into ambitious climate policies on a regional level. These include existing limitations as well as chances in the respective sectors on the state level, regarding their economic and technical structures as well as their innovation systems. The findings are based on more than a dozen stakeholder workshops with industry companies and more than 150 individual representatives of NRW's energy intensive industries as well as on background research in the initial phase of the project.

Description: Energy efficiency of a range of domestic appliances covered by the labelling and ecodesign directives has improved significantly over the last 15 years. However, the power consumption of the German residential sector has remained relatively constant over this period. Besides other factors, such as decreasing average household size, the main reasons for this development were the increases of the types, features, size, equipment stock and usage times of appliances and devices in private households. The project "Energy Sufficiency - strategies and instruments for a technical, systemic and cultural transformation towards sustainable restriction of energy demand in the field of construction and everyday life" investigates how the complementation of energy efficiency with energy sufficiency could lead to more user adequate domestic products and product-service systems and thereby result in an absolute reduction of power consumption. In this project, energy sufficiency is defined as a strategy to reduce energy consumption by three approaches: 1. Quantitative reduction of sizes, features, usage times of devices etc. 2. Substitution of technical equipment in households by e.g.urban services. 3. Adjustment of technical services delivered by appliances toutility needed and desired by users. The energy saving effects of an application of these approaches were modelled for different types of households and the energy saving potentials of energy sufficiency quantified. Innovative approaches for user adequate products and services were developed in open innovation workshops by the Design Thinking method. The paper summarizes some of the intermediate results of theoretical and transdisciplinary investigations of the project that runs until May 31, 2016. Furthermore, a first set of design criteria for user adequate appliances enabling energy sufficiency are developed based on these results. The paper concludes with suggestions for the future development of energy labelling and ecodesign derived from the design criteria and supplemented by examples of existing requirements according to the voluntary environmental label "Blauer Engel".

Description: In the last four decades, energy efficiency increased significantly in OECD countries. However, only during the most recent years, total energy consumption started to decrease a little, and much more slowly than energy efficiency potentials would suggest. Energy sufficiency has therefore gained new attention as a way to limit and reduce total energy consumption of a household or a country overall. The project "Energiesuffizienz" funded by the German ministry for research has examined what energy sufficiency actually is, and what householders, household members but also manufacturers and local authorities could do to make electricity use in the home more sufficient. The focus of this paper is the policy part of the project - the first comprehensive analysis of an energy sufficiency policy. The objective is to find out how policy can support market actors in using the energy sufficiency options identified. As for energy efficiency policy, it starts with the gathering of potential sufficiency actions and the analysis of the relevant barriers all market actors face, to derive recommendations for which policy instruments need to be combined to an effective policy package, and which other pre-conditions have to be met. Energy efficiency and energy sufficiency should not be seen as opposed to each other but work in the same direction - saving energy. Therefore, some instruments of the energy sufficiency policy package may be the same as for energy efficiency - such as energy taxation, and linear or progressive energy prices. Some may simply adapt technology-specific energy efficiency policy instruments. Examples are progressive appliance efficiency standards, standards based on absolute consumption, or providing energy advice. However, sufficiency may also require radical new approaches particularly to mitigate the drivers of non-sufficiency. They may range from promotion of completely different services for food and clothes cleaning, to instruments for limiting average dwelling floor area per person, or to a cap-and-trade system for the total electricity sales of a supplier to its customers, instead of an energy efficiency obligation. The paper presents these and other elements of an integrated energy sufficiency policy package resulting from this analysis.

Description: The overall objective of the web-based consumer information tool Euro-Topten is to promote the market transformation towards energy efficient products. Euro-Topten informs consumers about the most energy efficient products in various categories and thereby aims to directly influence the purchasing decisions of individuals or professional buyers. Providers of internet-based information tools are confronted with the problem, that there is no bidirectional interaction with the users. Hence, it is difficult to evaluate if the specific needs of users are addressed, if and how the user processes this information and to what extent the information influences the user's decision making process. To study these questions, a web-based survey was conducted in two consecutive rounds. In the first round the survey focused on the assessment of the information tool itself and the motivation for using the Euro-Topten websites. This survey was online on all active Euro-Topten partner websites from October to December 2012. In total, 1791 users completed the survey. In the second round, a subset of the survey population was queried again. 1,043 participants agreed to take part in a more comprehensive follow up survey, 383 completed the second survey between May and July 2013. The second survey concentrated on the question how Euro-Topten has influenced the purchasing behaviour of the survey participants. This gave significant insights on how the information on the Euro-Topten websites has affected purchasing decisions of the surveyed users. Based on a comparison of performance indicators of the most efficient products recommended on the Euro-Topten websites with performance indicators of a base case product available on the market, avoided energy demand could be estimated for those users, who bought products from the Euro-Topten list. Based on these results, two impacts of Euro-Topten could be estimated: The influence of Euro-Topten on purchasing decision of users and the associated reductions in energy demand and CO2-emissions.

Description: The electric utility sector in Australia, Germany and the U.S. are all going through major changes driven by declining sales, increasing use of distributed energy sources and policy responses to global climate change. This paper discusses efforts in each of these countries to reform their electric industries, address climate change and promote energy efficiency. Going forward, we see a role for government, utilities and private market energy efficiency efforts in all three countries, although the emphasis will vary by country and will evolve over time. Where all three parties can work together with a common vision, reform efforts are likely to be more successful and more sustained. In all three countries the future is uncertain. In the face of this uncertainty, energy efficiency supporters need to keep abreast of these changes, and find more flexible and nimble policy strategies for energy efficiency to prosper, as the future is likely to unfold in unexpected ways.

Description: Small-scale residential biomass combustion for space heating and warm water production already holds a considerable share on overall energy production from biomass in Europe. In the existing regulative framework of EU air quality and climate protection targets, an extended usage of renewable biomass heating without an increase of harmful emissions is urgently needed. In this context, the FP7 project "EU-UltraLowDust" (ULD) aimed at the demonstration of highly efficient and ultra-low emission small-scale biomass combustion technologies and the development of supporting policy recommendations. New combustion technology operating at almost zero particulate matter (PM) emissions has been demonstrated, rivalling even the performance of state-of-the-art natural gas fuelled systems. In this context, the authors analysed EU policy options for a faster diffusion of these new innovative technologies. The analysis presented in this paper is based on results from an original impact assessment with special focus on energy efficiency and emission scenarios, including the potential effects of a broad deployment of the new ULD technologies as well as the early replacement of poor performing existing installations. As the derived results show that major shares of energy consumption and emissions from residential biomass combustion in the EU are caused by old heating systems, specific policy measures for new and existing installations have been analysed. Following this, a recommended and harmonized policy package for new Small Combustion Installations (SCI) to be put on the market as well as for existing SCI in the stock has been developed, which will be presented in this paper. The basic policy package addresses new installations and consists of a two-step approach, aiming at enhancing the current and forthcoming policies addressing the SCI market in Europe. A complementary second policy package for existing installations aims specifically at the early replacement of SCI already installed in the stock, which are characterized by low efficiency and high emissions.

Description: After a wave of privatizations in the end of the 1990s, the electrical power supply of many municipalities in Germany has been returned into public hands. Many municipalities discover chances and possibilities for local action, which arise with remunicipalisation. The local policy-makers realize that remunicipalisation offers the opportunity of implementing an independent energy policy at local level which is critical in creating a transformation to a sustainable energy system based on energy efficiency and renewable energies. The municipal ownership allows a strong governance towards more political influence in the local energy market. In addition, there is a clear opinion of the population: 81 % of citizens surveyed say they trust their local municipal utility, compared to only 26 % who say they trust corporations (VKU-Survey, 2010). In summary, there are many good reasons for local politicians to establish their own municipal utilities. The payback for municipalities is tangible when the local utility focuses on reliably providing affordable energy rather than on increasing its returns. The new municipal power utilities stimulate competition and contribute to the renewal / restructuring of the traditional energy market. The founding of 72 municipal utilities since 2005 leads us to ask for the reasons. The study reviews the German trend towards municipal ownership of local utilities, assessing their performance based on 10 targets related to the energy transition, climate protection, and the local economic impact: 1. Achieving environmental objectives and organization of the local "Energiewende". 2. Higher local added value. 3. Harnessing tax regulations for improving municipal services. 4. Improving the income situation of the city. 5. Democratization of supply and stronger orientation towards the common good (public value). 6. Creating and protecting good jobs. 7. Acting in social responsibility in energy supply. 8. Expansion of eco-efficient energy services. 9. Harnessing customer relations and public image. 10. Materialising synergies with other sectors. Based on expert opinions, the study finds out that the likelihood of these targets being reached is "high to very high". The aim of this article is to provide a compact and basic understanding of the possible reasons for the phenomenon of remunicipalisation.

Description: The efficiency strategy to exploit the potential for energy savings in buildings still is applied rather slowly in most countries. In addition, there are indications that energy savings are partly compensated particularly by wealth but also rebound effects, the "empty nest" (persistence of elderly people and couples in family homes), and cohort effects (e.g. vintages of people or buildings). In Germany, as in other European countries, the existing trend in housing is a continuously growing floor space per capita. Over the last decades it expanded from about 20 m2 in 1960 to currently 45 m2 per person. Forecasts expect a further increase to more than 50 m2 per person. Obviously, more floor space needs more energy for space heating and cooling, ventilation, and lighting, but it also allows the household to operate more and or bigger appliances, all of which increase energy consumption. On the other hand, housing projects emerge offering relatively small private living spaces in combination with various shared spaces to use. Many of them are based on private initiatives. But what is the motivation behind it? And is there a higher need for new living concepts in the future? The proposed paper presents main drivers of increasing floor space per capita in Germany and discusses the question if more space is necessary for higher comfort. It presents different examples of housing concepts that strive to achieve good living with less space and suggests a "building typology of sufficiency". Finally, the paper discusses qualitatively to which extent these housing concepts can lead to less energy use and emissions. In this way sufficiency could be best friend with efficiency and tackle wealth, rebound, and other effects that counter-act efficiency progress. But therefore, as the paper concludes, politics and policies should recognise sufficiency as a field of action instead of referring to individual decisions and lifestyles.

Description: The Chinese national government has put energy efficiency and pollution control at the heart of its 11th five-year plan (2005-2010). However, implementation of national policies at the local level is notoriously poor in China. In order to tackle this problem, voluntary agreements were signed between local Environmental Protection Bureaus and 14 mostly state-owned companies from different energy-intensive sectors in Nanjing, Xi'an and Kelamayi in the context of an ongoing EU-funded pilot project. In Nanjing, for instance, agreed targets are in the range of a 3-5% reduction in energy intensity by 2009 over a 2007 baseline. The pilot agreements are informed by Dutch experiences with long-term agreements on energy efficiency (LTA/1989-1999) as European best practice, but have been significantly adjusted to Chinese circumstances. Much emphasis was put on process management applying a cooperative approach throughout. Each enterprise put together a so-called Energy Action Team for voluntary agreement development and implementation. This helped to create a sense of ownership in the companies and assigned clear responsibilities. Energy Action Teams conducted Energy Potential Scans in cooperation with a Dutch expert to identify energy saving potentials and possible measures to realize them. On this basis, achievable targets were agreed and a detailed action plan was developed. A first evaluation is scheduled for April 2009. By lifting industry on a more equal power level with government authorities, voluntary agreements showed to be an effective policy instrument to overcome traditional institutional constraints to environmental policy implementation at the local level in China.

Description: The EU Directive on Energy End-use Efficiency and Energy Services (ESD) set an indicative target for EU Member States to achieve a 9% annual energy saving by 2016 from new energy efficiency improvement (EEI) measures. Until now there has been no common methodology on how to measure and evaluate such savings. An international consortium funded by the Intelligent Energy Europe programme and co-ordinated by the Wuppertal Institute has developed harmonised methods for the evaluation of end-use EEI measures. The European Commission encourages Member States to prove energy savings with the help of these methods. From the evaluation point of view, the transport sector is a special case. In the transport sector, data collection appears to be difficult. A number of values can be derived from existing national statistics, but sources have to be analysed in order to be operational. In passenger transportation, measures prevalently aim at changing mobility behaviour. Mobility behaviour depends on specific socio-economic and local conditions and might therefore vary considerably from measure to measure. Often, only surveys that are well-defined for certain conditions can generate appropriate data. The paper discusses availability and certainty of data sources to be derived to evaluate EEI measures in passenger transportation. It first introduces two transport-related bottom-up evaluation methods for the transport sector. One aims at evaluating measures fostering vehicle energy efficiency. The other one aims at evaluating modal shifts. The paper then points to sources of corresponding data and the way the data have to be analysed. Thereby it demonstrates the trade-off between evaluation costs and the level of certainty. In so doing, it gives recommendations how to conduct the evaluation of transport-related EEI measures with keeping both efforts low and certainty high.

Description: Bad Hersfeld is a small city with about 30.000 inhabitants situated in the middle of Germany. Climate Protection has been on the political agenda in Bad Hersfeld since quite a while. In 1997 the Wuppertal Institute elaborated a first energy and CO2 balance for the city, which was updated in 2007. With the compilation of the CO2 balance it was shown that the emissions in Bad Hersfeld almost stayed at a constant level between 1997 and 2006. The result was sobering for the local authority. Although some single measures had been implemented, there was no improvement of the CO2-balance. It was concluded that a successful climate protection strategy needs a comprehensive concept comprising all sectors and a periodic monitoring. Bad Hersfeld commissioned the Wuppertal Institute to develop feasible measures to reduce the CO2 emissions drastically and instruments to overcome existing barriers. In a close cooperation with the City Council and the local municipal utility a climate protection concept was compiled that is rather ambitious for a city of this size. In consideration of the regional peculiarities12 concrete measures and 7 accompanying measures build the core of the concept with a main focus on energy efficiency (final energy), combined heat and power (CHP) and renewable energies. Another important part of the concept is a municipal support programme to develop the endogenous efficiency potentials and renewable energies in the region. Further to these planning instruments, information and networking activities are compiled as well as a variety of suggestions for a climate protection marketing (Wagner 2008). Some of these measures that were developed in an iterative and cooperative process between the responsible actors in Bad Hersfeld and the Wuppertal Institute are transferable to other cities and towns. The impeding factors in Bad Hersfeld like the user-investor dilemma, the low capital of small housing associations or the large stock of listed historical buildings, are typical for cities of this size.

Description: Iran is one of the largest oil producers and natural gas owners globally. However, it has to struggle with domestic energy shortages, economic losses through energy subsidisation and inefficient energy infrastructures. Furthermore, GHG and other energy related emissions are rapidly increasing and posing a growing threat to local environment as well as global climate. With current trends prevailing, Iran may even become a net energy importer over the next decades. Resource allocation is therefore a crucial challenge for Iran: domestic consumption stands versus exports of energy. The energy transformation sector clarifies Iran's dilemma: soaring electricity demand leads to blackouts, and power plant new builds are far from using most efficient technologies (e. g. CHP), therefore keeping energy intensive structures. But fossil fuels could be sold on international markets if spared by having more efficient energy infrastructures. As shown by the high energy intensity of its economy, Iran has large potentials for energy saving and efficiency. In order to highlight and better identify this potential the paper contrasts a high efficiency scenario in all sectors of energy transformation and consumption with a possible "business as usual" development. Using a bottom-up approach, the analysis provides a sector-by-sector perspective on energy saving potentials. These can be utilised on the demand side especially in the transport sector (fuels) and in households (electricity for appliances, natural gas for heating). Electricity generation bears efficiency potentials as well. We conclude that Iran, but also the international community, would benefit on various levels from a more energy-efficient Iranian economy: Energy exports could increase, generating more foreign currency and reducing the pressures on international oil and gas prices; energy consumption would decrease, leading to lower needs for nuclear energy and for subsidies to Iranian people, as well as to a reduction of the high external costs entailed by fossil fuels combustion (smog in cities, environmental stress).

Description: Based on a comprehensive scenario analysis of the EU's GHG emissions by 2020, we show that the 20% energy savings target set in the Action Plan "Doing more with less" in 2006 is still the most significant and thus indispensable strategy element within an ambitious EU climate and energy strategy targeting at a 30% reduction of GHG emissions by 2020. The scenario analysis provides a sector by sector projection of potential future energy use and GHG emissions, combined with a detailed policy analysis of the core policies on energy efficiency by the EU and its Member States taken from current research results by the authors and others. Consequently the paper identifies and quantifies the current implementation deficit in the EU and shows that, despite of sufficient targets, implementation is still significantly lacking in almost all fields of energy efficiency. Some, e.g. transport sector and buildings, are still substantially far from receiving the necessary political impetus. The paper also demonstrates co-benefits of a strong energy efficiency strategy, e.g. the achievability of the targets of the RES directive, which crucially depends on a strong efficiency policy. We conclude that the efforts of the energy efficiency policy of the EU and its Member States have to be significantly intensfied. As proposed by the EU in case that other developed and key developing countries take up comparable targets in order to fulfil its role in the climate and energy strategy. To achieve this, we offer an analysis of the current weaknesses of EU energy efficiency policy and derive recommendations on how the EU can still reach its targets for 2020.

Description: Motivated by, inter alia, the increasing energy prices, the security of energy supply and climate change, the new EU "Action Plan for Energy Efficiency: Realising the Potential" (EEAP), sets out the policies and measures required to be implemented over the next six years to achieve the EU's goal of reducing annual primary energy consumption by about 20 % by 2020. By increasing energy efficiency, the security of energy supply and the reduction of carbon emissions are also improved. The paper will analyse the 20 % target of the new EEAP for the energy demand side by comparison with different recent energy scenarios for the EU. It will therefore review the recommended policies and measures and examine, in which energy demand sectors energy efficiency may be increased and to which extend. The main focus is whether the recommended policies and actions will be sufficient and which additional measures may be useful, if additional measures are needed.

Description: About 2 % of the overall electricity consumption of the EU is caused by circulators in single or double family homes and flats. A new technology of pumps with electronically commutated (EC) motor pumps is available now; it is one possible way to achieve a reduction in circulator annual electricity use by 60 % or more. The project's objective is a market transformation towards this new very energy-efficient pump technologies - Energy+ pumps - for circulators in heating systems, both stand alone and integrated in boilers. Only few manufacturers have so far introduced the new pump technology to the market for single or double family homes and flats. To bring more products to the market from all major manufacturers, the project will adapt and apply the technology procurement methodology as it was very successfully tested in the European Energy+ project on energy-efficient cold appliances. Large buyers will be aggregated, to activate the pump and boiler manufacturers. Sales and training materials and a sizing spreadsheet software for installation contractors will be developed and applied. A competition both for energy-efficient products and marketing campaigns will be organised and the information on the Energy+ pumps will be disseminated widely through website, newsletter, media, and fairs. This paper gives a short overview of this project and presents the results of the first project phases: a European wide market study on circulators and heating systems, and the first Energy+ lists for circulators, buyers and supporters.

Description: Although the anticipated "end of cheap oil" has boosted the interest in energy efficiency as a cornerstone of energy and climate strategies, it is usually taken into account on the basis of rather narrowly defined cost-benefit considerations. As a consequence, substantial ancillary benefits are usually barely considered. In a recent study for the European Parliament (EP), the authors assessed two enhanced climate strategies compared to a more conventional strategy. One enhanced climate policy scenario relies, in particular, on raising the annual pace of energy efficiency improvement. The other aims at a radical boost of the market share of renewable energy forms, which, however, presupposes an equally radical improvement of energy efficiency. The present article presents the scenario results and places them in the context of risk characterisation of the considered climate policy scenarios. Risks of international turmoil and energy price hikes could be reduced if dependency rates for fossil fuel imports went down. A more ambitious climate policy can also strengthen the EU position in post-Kyoto global climate agreements and a moderated need for emission trading can, for example, reduce conflicting pressures on clean technology transfer. On the other hand, the implementation of the efficiency strategy will entail increased domestic risks because it will involve a re-prioritisation of resource allocation and will thus affect the current distribution of wealth in both the energy sector and some other closely related sectors. The article outlines the main drivers behind the ambitious energy efficiency scenario and it attaches tentative price tags to the ancillary effects, with special emphasis on the above sketched swapping of risks. It will, therefore, strongly argue for a more holistic view, which underscores the need for political action and the benefits of such proactive policies in favour of energy efficiency.

Description: The German climate change programme (2000) identified the residential sector as one of the main sectors in which to achieve additional GHG reductions. Our case study compiles results of existing evaluations of the key policies and measures that were planned and introduced and carries out some own estimates of achievements. We show, which emission reductions and which instruments where planned and what was delivered until 2004. Legal instruments such as the revised building code were introduced later than planned and their effects will - at least partly - fall behind expectations. Other legal instruments such as minimum energy performance standards for domestic appliances etc. were - in spite of the programme - not implemented yet. On the other hand, substantial financial incentives were introduced. Especially schemes granting low-interest loans for building renovation were introduced. However tax subsidies for low-energy buildings were phased out. In general we can conclude from our case study that Germany was not able to compensate for the slower or restricted implementation of legal instruments through the introduction of financial incentives. Particularly the efficient use of electricity has been left aside as almost no further policy action was taken since 2001. Thus energy efficiency in the residential sector will not deliver the GHG reductions planned for in the German climate change programme until 2005. From our findings we draw conclusions and recommendations towards policy makers: Which lessons are to be learnt and what has to be done in order to fully harness EE potentials in residential sector as planned for 2010?

Description: There is an extensive potential for GHG emission reductions in the new EU member states and the EU accession countries by improving energy efficiency, investing in renewable energy supply and other measures, part of which could be tapped by JI. However, the EU Emissions Trading System (EU ETS) and especially the recently adopted "Linking Directive" is probably going to have a significant impact on this JI potential. Especially two provisions are important: The baseline of a project has to be based on the acquis communautaire, the environmental regulations of which are substantially higher than the Accession Countries' existing ones. Projects, which directly or indirectly reduce emissions from installations falling within the scope of the EU ETS, can only generate certificates if an equal number of EU allowances are cancelled. JI is thus put into direct competition with the EU ETS. In this paper we analyse the impact of these provisions first in theory and then country by country for six Central and East European countries that recently acceded the EU or are candidates for accession. As a result, we give an overview of the potential and the limitations of JI as an instrument for achieving emission reductions in the selected Accession Countries and provide important overview information to policy makers.

Description: As many other countries, Germany misses to exploit most of its large potential for cost-effective energy efficiency improvements. An organisation collecting funds and allocating them to the most (cost-)effective programmes could be a solution. Therefore, political parties and trade unions as well as environmental NGOs have called for the creation of such an Energy Efficiency Fund. A recent study by the Wuppertal Institute together with a number of partners, commissioned by the Hans Böckler Foundation, analysed the feasibility of such an institution. It has been the objective of the project, completed in March 2005, to identify the added value of an Energy Efficiency Fund, develop concrete proposals for the institutional setting and the financing of an Energy Efficiency Fund in Germany, prepare and assess the benefits and costs of a portfolio of innovative but realistic energy efficiency programmes and campaigns, which the Energy Efficiency Fund would implement, identify the effects of the fundraising and the programmes on different industries, particularly on the suppliers of energy-efficient technologies and services, and on their growth and employment perspectives, estimate the net employment effects of such an Energy Efficiency Fund and its activities. This paper presents the results and assesses the usefulness of the project and the participatory elements for increasing the acceptance of such a policy instrument.

Description: Under the framework of the UN framework convention on climate change (UNFCCC) and its Kyoto Protocol the targets and strategies for the second and third commitment period ("post-2012") have to be discussed and set in the near future. Regarding the substantial emission reductions that have to be shouldered by the industrialized nations over the next two decades it is evident that all available potentials to mitigate greenhouse gas (GHG) emissions have to be harnessed and that energy efficiency has to play a key role. To substantiate this we developed a comprehensive scenario analysis of the EU 25s energy system and other greenhouse gas emissions until 2020. Our analysis shows which key potentials to mitigate greenhouse gas emissions are available, by which policies and measures they are attainable and which will be benefits of greenhouse gas mitigation measures. By this analysis we show the mayor role of energy efficiency in all sectors and all member states. We demonstrate that a reduction of EU 25 greenhouse gas emissions by more than 30 % by 2020 is feasible, reasonable and - to a large extent - cost effective. We also develop a comprehensive policy package necessary to achieve ambitious Post-Kyoto targets. The scenario analysis results in a clear identification of the needed strategies, policies and measures and especially the relevance of energy efficiency to achieve the necessary ambitious greenhouse gas reduction targets. It also clearly shows the costs and the benefits of such a policy compared to a business as usual case.