ALBERT

Description: Food is needed to maintain our physical integrity and therefore meets a most basic human need. The food sector got in the focus of environmental policy, because of its environmental implications and its inefficiency in terms of the amount of food lost along the value chain. The European Commission (EC) flagged the food waste issue a few years ago and adopted since then a series of policies that partially address the problem. Among these, the Resource Efficiency Roadmap set the aspirational goal of reducing the resource inputs in the food chain by 20% and halving the disposal of edible food waste by 2020. Focusing on consumer food waste, we tested what a reduction following the Roadmap's food waste target would imply for four environmental categories in EU28 (European Union 28 Member States): greenhouse gas emissions, land use, blue water consumption, and material use. Compared to the 2011 levels, reaching the target would lead to 2% to 7% reductions of the total footprint depending on the environmental category. This equals a 10% to 11% decrease in inputs in the food value chain (i.e., around half of the resource use reductions targeted). The vast majority of potential gains are related to households, rather than the food-related services. Most likely, the 2020 target will not be met, since there is insufficient action both at Member State and European levels. The Sustainable Development Goals provide a new milestone for reducing edible food waste, but Europe needs to rise up to the challenge of decreasing its per capita food waste generation by 50% by 2030.

Description: Reliably reducing the emissions in the building sector plays a crucial role if the 1.5°C climate target from the Paris Agreement is to be met. The observed trends show a significant increase in building energy use, especially in emerging economies. Counteracting these trends is absolutely essential, especially in the light of urbanisation, population growth and changing lifestyles. In terms of mitigating the climate impact of buildings, ensuring high levels of efficiency (i.e. very low energy needs, especially for heating and cooling) has the greatest potential for saving energy and emissions, and is at the same time the prerequisite for effective use of energy from renewable sources. Clearly defined targets and suitable metrics are essential to enable appropriate design decisions. Implemented projects clearly indicate that quality assured design and construction lead to reliable in-use energy performance. Effective policy packages to address opportunities and challenges are important drivers to support the uptake of state-of-the-art efficiency measures in the urban building sector.

Description: Sustainable Development Goal 12 (SDG 12) requires sustainable production and consumption. One indicator named in the SDG for resource use is the (national) material footprint. A method and disaggregated data basis that differentiates the material footprint for production and consumption according to, e.g., sectors, fields of consumption as well as socioeconomic criteria does not yet exist. We present two methods and its results for analyzing resource the consumption of private households based on microdata: (1) an indicator based on representative expenditure data in Germany and (2) an indicator based on survey data from a web tool. By these means, we aim to contribute to monitoring the Sustainable Development Goals, especially the sustainable management and efficient use of natural resources. Indicators based on microdata ensure that indicators can be disaggregated by socioeconomic characteristics like age, sex, income, or geographic location. Results from both methods show a right-skewed distribution of the Material Footprint in Germany and, for instance, an increasing Material Footprint with increasing household income. The methods enable researchers and policymakers to evaluate trends in resource use and to differentiate between lifestyles and along socioeconomic characteristics. This, in turn, would allow us to tailor sustainable consumption policies to household needs and restrictions.

Description: For many years, carbon capture and storage (CCS) has been discussed as a technology that may make a significant contribution to achieving major reductions in greenhouse gas emissions. At present, however, only two large-scale power plants capture a total of 2.4 Mt CO2/a. Several reasons are identified for this mismatch between expectations and realised deployment. Applying bibliographic coupling, the research front of CCS, understood to be published peer-reviewed papers, is explored to scrutinise whether the current research is sufficient to meet these problems. The analysis reveals that research is dominated by technical research (69%). Only 31% of papers address non-technical issues, particularly exploring public perception, policy, and regulation, providing a broader view on CCS implementation on the regional or national level, or using assessment frameworks. This shows that the research is advancing and attempting to meet the outlined problems, which are mainly non-technology related. In addition to strengthening this research, the proportion of papers that adopt a holistic approach may be increased in a bid to meet the challenges involved in transforming a complex energy system. It may also be useful to include a broad variety of stakeholders in research so as to provide a more resilient development of CCS deployment strategies.

Description: Green Information Systems in general, and footprint calculators in particular, are promising feedback tools to assist people in adopting sustainable behaviour. Therefore, a Material Footprint model for use in an online footprint calculator was developed by identifying the most important predictors of the Material Footprint of the calculator's users. By means of statistical learning, the analysis revealed that 22 of the 95 predictors identified accounted for 74% of the variance in Material Footprints. Ten predictors out of the 95, mainly from the mobility domain, were capable of showing a prediction accuracy of 61%. The authors conclude that 22 predictors from the areas of mobility, housing and nutrition, as well as sociodemographic information, accurately predict a person's Material Footprint. The short and concise Material Footprint model may help developers and researchers to enhance their information systems with additional items while ensuring the data quality of such applications.

Description: Urban energy systems have been commonly considered to be socio-technical systems within the boundaries of an urban area. However, recent literature challenges this notion in that it urges researchers to look at the wider interactions and influences of urban energy systems wherein the socio-technical sphere is expanded to political, environmental and economic realms as well. In addition to the inter-sectoral linkages, the diverse agents and multilevel governance trends of energy sustainability in the dynamic environment of cities make the urban energy landscape a complex one. There is a strong case then for establishing a new conceptualisation of urban energy systems that builds upon these contemporary understandings of such systems. We argue that the complex systems approach can be suitable for this. In this paper, we propose a pilot framework for understanding urban energy systems using complex systems theory as an integrating plane. We review the multiple streams of urban energy literature to identify the contemporary discussions and construct this framework that can serve as a common ontological understanding for the different scholarships studying urban energy systems. We conclude the paper by highlighting the ways in which the framework can serve some of the relevant communities.

Description: Digitalization is a transformation process which has already affected many parts of industry and society and is expected to yet increase its transformative speed and impact. In the energy sector, many digital applications have already been implemented. However, a more drastic change is expected during the next decades. Good understanding of which digital applications are possible and what are the associated benefits as well as risks from the different perspectives of the impacted stakeholders is of high importance. On the one hand, it is the basis for a broad societal and political discussion about general targets and guidelines of digitalization. On the other hand, it is an important piece of information for companies in order to develop and sustainably implement digital applications. This article provides a structured overview of potential digital applications in the German energy (electricity) sector, including the associated benefits and the impacted stakeholders on the basis of a literature review. Furthermore, as an outlook, a methodology to holistically analyze digital applications is suggested. The intended purpose of the suggested methodology is to provide a complexity-reduced fact base as input for societal and political discussions and for the development of new digital products, services, or business models. While the methodology is outlined in this article, in a follow-up article the application of the methodology will be presented and the use of the approach reflected.

Description: Nigeria is Africa's largest economy and home to approximately 10% of the un-electrified population of Sub-Saharan Africa. In 2017, 77 million Nigerians or 40% of the population had no access to affordable, reliable and sustainable electricity. In practice, diesel- and petrol-fuelled back-up generators supply the vast majority of electricity in the country. In Nigeria's nationally-determined contribution (NDC) under the Paris Agreement, over 60% of the greenhouse gas emissions (GHG) reductions are foreseen in the power sector. The goal of this study is to identify and critically examine the pathways available to Nigeria to meet its 2030 electricity access, renewables and decarbonization goals in the power sector. Using published data and stakeholder interviews, we build three potential scenarios for electrification and growth in demand, generation and transmission capacity. The demand assumptions incorporate existing knowledge on pathways for electrification via grid extension, mini-grids and solar home systems (SHS). The supply assumptions are built upon an evaluation of the investment pipeline for generation and transmission capacity, and possible scale-up rates up to 2030. The results reveal that, in the most ambitious Green Transition scenario, Nigeria meets its electricity access goals, whereby those connected to the grid achieve a Tier 3 level of access, and those served by sustainable off-grid solutions (mini-grids and SHS) achieve Tier 2. Decarbonization pledges would be surpassed in all three scenarios but renewable energy goals would only be partly met. Fossil fuel-based back-up generation continues to play a substantial role in all scenarios. The implications and critical uncertainties of these findings are extensively discussed.

Description: The amount of land directly disturbed by mining is a key generic environmental pressure indicator. A novel method based on the measurement of the cumulative net area disturbances using Landsat satellite images and its correlation with the cumulative ore production at the mine site was applied. Weighted disturbance rates (WDRs) were calculated indicating the annual quantity of hectares newly disturbed per million metric tons of ore extracted. Results show that open pit (OP) have a smaller average WDR (5.05 ha/Mt) than underground (UG) mines (11.85 ha/Mt). This is explained by the relation between the annual amounts of new net area disturbed and of ore extracted which is larger for UG than for OP mines due to the annual extraction volume (lower for UG). Overall findings demonstrate that bauxite mining has the highest WDR (7.98 ha/Mt), followed by gold (6.70 ha/Mt), silver (5.53 ha/Mt), copper (4.5 ha/Mt) and iron (4.25 ha/Mt).

Description: Renewable energy targets in the European Union (EU) have raised the demand for timber and are expected to increase dependence on imports. However, EU timber consumption levels are already disproportionally high compared to the rest of the world. The question is, how much timber is available for the EU to sustainably harvest and import, in particular considering sustainable forest management practices, a safe operating space for land-system change, and the global distribution of "common good" resources. This article approaches this question from a supply angle to develop a reference value range for the current as well as future sustainable supply of timber at the EU-27 and global levels. For current supply estimates, national-level data on forest area available for wood supply, productivity in that area, as well as the rate available for harvest were collected and aggregated into three potential supply scenarios. For future supply estimates, a safe operating space scenario halting land use change, a sensitivity analysis, and a literature review were performed. To provide both a comparison of global versus EU sustainable supply capacities and to develop a benchmark toward evaluating and comparing levels of consumption to sustainable supply capacities, per capita calculations were made. Results revealed that the per capita sustainable supply potential of EU forests is estimated to be around three times higher than the global average in 2050. Whether a global or EU reference value is more appropriate for EU policy orientation, considering both strengthened economic and cultural ties to the forest in forest-rich countries as well as the need to prevent problem shifting associated with exporting land demands abroad, is discussed. Further research is needed to strengthen and harmonize data, improve methods for modeling future scenarios and incorporate interdisciplinary and multi-stakeholder perspectives toward the development of robust and politically relevant reference values for sustainable consumption levels.

Description: Energy-intensive processing industries (EPIs) produce iron and steel, aluminum, chemicals, cement, glass, and paper and pulp and are responsible for a large share of global greenhouse gas emissions. To meet 2050 emission targets, an accelerated transition towards deep decarbonization is required in these industries. Insights from sociotechnical and innovation systems perspectives are needed to better understand how to steer and facilitate this transition process. The transitions literature has so far, however, not featured EPIs. This paper positions EPIs within the transitions literature by characterizing their sociotechnical and innovation systems in terms of industry structure, innovation strategies, networks, markets and governmental interventions. We subsequently explore how these characteristics may influence the transition to deep decarbonization and identify gaps in the literature from which we formulate an agenda for further transitions research on EPIs and consider policy implications. Furthering this research field would not only enrich discussions on policy for achieving deep decarbonization, but would also develop transitions theory since the distinctive EPI characteristics are likely to yield new patterns in transition dynamics.

Description: Background: Global targets for reducing resource use have been set by organizations such as the International Resource Panel and the European Commission. However, these targets exist only at the macro level, e.g., for individual countries. When conducting an environmental analysis at the micro level, resource use is often neglected as an indicator. No sum parameter indicating all abiotic and biotic raw materials has been considered for life cycle assessment, as yet. In fact, life cycle assessment databases even lack some of the specific input flows required to calculate all abiotic and biotic raw materials. In contrast, the cumulative energy demand, an input-based indicator assessing the use of energy resources, is commonly used, particularly when analyzing energy-intensive product systems. Methods: In view of this, we analyze the environmental relevance of the sum parameter abiotic and biotic raw material demand, which we call the material footprint. First, we show how abiotic and biotic raw material demand can be implemented in the Ecoinvent life cycle assessment database. Employing the adapted database, the material footprint is calculated for 12 individual datasets of chosen materials and crops. The results are compared to those of the cumulated energy demand and four selected impact categories: climate change, ozone depletion, acidification, and terrestrial eutrophication. Results: The material footprint is generally high in the case of extracted metals and other materials where extraction is associated with a large amount of overburden. This fact can lead to different conclusions being drawn compared to common impact categories or the cumulative energy demand. However, the results show that both the range between the impacts of the different materials and the trends can be similar. Conclusions: The material footprint is very easy to apply and calculate. It can be implemented in life cycle assessment databases with a few adaptions. Furthermore, an initial comparison with common impact indicators suggests that the material footprint can be used as an input-based indicator to evaluate the environmental burden, without the uncertainty associated with the assessment of emission-based impacts.

Description: Modelling studies which project pathways for the future of energy in India currently have several implicit assumptions with regards to the social, institutional, and political changes necessary for energy transitions. This paper focuses on the specific question of land use change required for realising ambitious clean energy targets. Demand for land is likely to be a critical question in India's energy future given the challenges with land acquisition in the country as a result of high population density and significant rights enjoyed by landowners. Yet, there is a lack of literature relevant to India which makes a quantitative assessment of the land use impacts of different types of low carbon technologies. I calculate and compare the land requirements in India of ground based solar photovoltaic (PV) power, nuclear power, and wind energy. All three types of technologies are expected to grow substantially as a share of India's electricity mix in the coming years. The analysis suggests that land demands of ground based solar PV are likely to be substantial compared to wind energy and nuclear power, and some policy suggestions are provided which may help mitigate that challenge.

Description: We present an approach to simulate climate and energy policy for the EU, using a flexible and modular agent-based modelling approach and a toolbox, called the Energy Modelling Laboratory (EMLab). The paper shortly reviews core challenges and approaches for modelling climate and energy policy in light of the energy transition. Afterwards, we present an agent-based model of investment in power generation that has addressed a variety of European energy policy questions. We describe the development of a flexible model core as well as modules on carbon and renewables policies, capacity mechanisms, investment behaviour and representation of intermittent renewables. We present an overview of modelling results, ongoing projects, a case study on current reforms of the EU ETS, and we show their relevance in the EU context.

Description: Sustainable out-of-home nutrition can help achieve overarching sustainability goals through a transformation in demands of consumers in this growing market. Studies indicate that individual food choice behaviours in out-of-home settings relate to a wide set of personal, social and situational factors. These factors can be influenced by various intervention strategies. In an expert meeting and a focus group we invited caterers and consumers to generate, discuss and evaluate various practical intervention ideas. Both parties largely perceive the explored ideas as useful and agree on key intervention ideas. Overall caterers and consumers state to prefer nudging strategies over information and participation interventions.

Description: The article gives insights into the implementation process of sustainable management strategies in the food service sector. Furthermore, the normative requirements for sustainability in form of a mission statement, called "sustainable food services" are presented. The authors perceive this mission statement as a means to transfer current political demands (as in the SDG of the UN) into the sector. It could serve as a model for the entire food service sector to support and facilitate implementing aspects of sustainability into business practices with the help of sustainable management tools.

Description: There is a strong trend towards research in society-based laboratories, especially in relation to sustainability. Semantic analysis reveals related discourses and emerging lines of inquiry, namely transformative potential, transdisciplinarity and learning. Real-world laboratories are a dynamic example of this research. Contributions of how to deepen and broaden their analysis are presented.

Description: Real-world laboratories (RwLs, German Reallabore) belong to a family of increasingly popular experimental and transdisciplinary research approaches at the science-society interface. As these approaches in general, and RwLs in particular, often lack clear definitions of key characteristics and their operationalization, we make two contributions in this article. First, we identify five core characteristics of RwLs: contribution to transformation, experimental methods, transdisciplinary research mode, scalability and transferability of results, as well as scientific and societal learning and reflexivity. Second, we compare RwLs to similar research approaches according to the five characteristics. In this way, we provide an orientation on experimental and transdisciplinary research for societal transformations, and reveal the contributions of this type of research in supporting societal change. Our findings enable learning across the different approaches and highlight their complementarities, with a particular focus on RwLs.

Description: This paper offers a comparative analysis of small wind electrification programmes targeted at remote sheep farming households in two of the windiest regions of the world, Argentine Patagonia and the Falkland Islands/Islas Malvinas. Despite comparable environmental conditions and local livelihoods, their impact was vastly different. Insights from socio-technical systems and strategic niche management approaches offered a deeper understanding of the local context and development dynamics, facilitating the identification of the critical success factors that contributed to these two distinct outcomes and finally highlighting those that can inform the design of future such initiatives. The research is based upon a series of semi-structured interviews with key stakeholders, observational field visits and review of archival sources. The critical factors identified by this case study research include strong and consistent institutional support, investment in robust equipment creation of effective feedback loops from the field and hybridisation. Additionally, a user centred approach that assesses whether small wind is really the right option for each individual household and if so, matches an appropriate energy system to their unique and evolving needs. Finally, empowering users to take on as much responsibility for maintenance as possible by integrating maintenance practices with local culture and ensuring the support of an effective decentralised maintenance network.

Description: A significant reduction in greenhouse gas emissions will be necessary in the coming decades to enable the global community to avoid the most dangerous consequences of man-made global warming. This fact is reflected in Germany's 7th Federal Energy Research Program (EFP), which was adopted in 2018. Direct Air Capture (DAC) technologies used to absorb carbon dioxide (CO2) from the atmosphere comprise one way to achieve these reductions in greenhouse gases. DAC has been identified as a technology (group) for which there are still major technology gaps. The intention of this article is to explore the potential role of DAC for the EFP by using a multi-dimensional analysis showing the technology's possible contributions to the German government's energy and climate policy goals and to German industry's global reputation in the field of modern energy technologies, as well as the possibilities of integrating DAC into the existing energy system. The results show that the future role of DAC is affected by a variety of uncertainty factors. The technology is still in an early stage of development and has yet to prove its large-scale technical feasibility, as well as its economic viability. The results of the multi-dimensional evaluation, as well as the need for further technological development, integrated assessment, and systems-level analyses, justify the inclusion of DAC technology in national energy research programs like the EFP.

Description: Footprint calculators are efficient tools to monitor the environmental impact of private consumption. We present the results of an analysis of data entered into an online Material Footprint calculator undertaken to identify the socioeconomic drivers of the Material Footprint in different areas of consumption, from housing to holidaymaking. We developed regression models to reveal (1) the impact of socioeconomic characteristics on Material Footprints of private households and (2) correlations between the components of Material Footprints for different arrays of consumption. Our results show that an increasing Material Footprint in one array of consumption comes with an increasing Material Footprint in all other arrays, with the exception of housing and holidaymaking. The socioeconomic characteristics of users have a significant impact on their Material Footprints. However, this impact varies by the array of consumption. Households only exhibit generally bigger Material Footprints as a result of higher incomes and larger dwellings. We conclude that indicators which strive to monitor resource efficiency should survey disaggregated data in order to classify the resource use to different population groups and arrays of consumption.

Description: Nowadays, the main impetus to apply additive manufacturing (AM) of metals is the high geometric flexibility of the processes and its ability to produce pilot or small batch series. In contrast, resource and energy intensities are often not considered as constraints, even though the turnout of additive manufacturing is high, at least compared to chip removing processes. The study at hand analyses the material characteristics and environmental impacts of a hose nozzle as an example of a commercial product of simple geometry. The production routes turning (conventional manufacturing) and laser beam melting (additive manufacturing) are compared to each other in terms of natural resource use, climate change potential and primary energy demand. It is found, that the product shows a lower demand for natural resources when produced via AM, but higher carbon emissions and energy demand when using a steel, that is mainly (80%) produced from high-alloyed steel scrap. However, different case studies during the sensitivity analyses showed that a number of factors highly influence the results: the steel source as well as the source of electricity play a major role in determining the environmental performance of the production routes. The authors also found that other production processes (here cold forging of tubes) might be an eco-friendly alternative to both routes, if feasible from an economic point of view. In regard to the material characteristics, experimental testing revealed that the material advantages of AM produced hose nozzles (in particular higher yield strength) are reduced after a solution heat treatment is applied to the as-produced material, in order to increase corrosion resistance. However, products that do not require this production step might benefit from the higher yield strength, as a lower wall thickness could be realised.

Description: Responsible consumption and production is one of the Sustainable Development Goals of the United Nations. To achieve this goal the currently high extraction rates of natural resources, that our economy is based on, needs a transformation of the consumption and production system considering technological as well as social change. One of the promising transition approaches is seen in collaborative consumption with its many facets of socio-cultural innovations and fast growing number of participants and businesses. With a decreasing production of goods, due to a utilisation of underutilised assets, these offers might support an absolute reduction of the global resource use. However, a positive environmental effect depends on the setting and the social practices of such sharing offers and is not sustainable or resource efficient generally. Also, resource efficient practices with a low diffusion potential that stick in a niche offer no leverage to achieve sustainable consumption patterns. Thus, this paper describes a mixed method approach to analyse the resource efficiency and diffusion potential of 20 sharing offers in the area of mobility, housing & travel and everyday objects in Germany. Results show that the overall positive environmental connotation of sharing offers cannot be confirmed. We identified five clusters of offers that are all treated to be differently when it comes to deploying the positive potential and avoid unnecessary societal effort to achieve the mentioned Sustainable Development Goal.

Description: In recent years, most countries in the Middle East and North Africa (MENA), including Jordan, Morocco and Tunisia, have rolled out national policies with the goal of decarbonising their economies. Energy policy goals in these countries have been characterised by expanding the deployment of renewable energy technologies in the electricity mix in the medium term (i.e., until 2030). This tacitly signals a transformation of socio-technical systems by 2030 and beyond. Nevertheless, how these policy objectives actually translate into future scenarios that can also take into account a long-term perspective up to 2050 and correspond to local preferences remains largely understudied. This paper aims to fill this gap by identifying the most widely preferred long-term electricity scenarios for Jordan, Morocco and Tunisia. During a series of two-day workshops (one in each country), the research team, along with local stakeholders, adopted a participatory approach to develop multiple 2050 electricity scenarios, which enabled electricity pathways to be modelled using Renewable Energy Pathway Simulation System GIS (renpassG!S). We subsequently used the Analytical Hierarchy Process (AHP) within a Multi-Criteria Analysis (MCA) to capture local preferences. The empirical findings show that local stakeholders in all three countries preferred electricity scenarios mainly or even exclusively based on renewables. The findings demonstrate a clear preference for renewable energies and show that useful insights can be generated using participatory approaches to energy planning.

Description: Feedback devices can be used to inform households about their energy-consumption behavior. This may persuade them to practice energy conservation. The use of feedback devices can also - via word of mouth - spread among households and thereby support the spread of the incentivized behavior, e.g. energy-efficient heating behavior. This study investigates how to manage the impact of these environmental innovations via marketing. Marketing activities can support the diffusion of devices. This study aims to identify the most effective strategies of marketing feedback devices. We did this by adapting an agent-based model to simulate the roll-out of a novel feedback technology and heating behavior within households in a virtual city. The most promising marketing strategies were simulated and their impacts were analyzed. We found it particularly effective to lend out feedback devices to consumers, followed by leveraging the social influence of well-connected individuals, and giving away the first few feedback devices for free. Making households aware of the possibility of purchasing feedback devices was found to be least effective. However, making households aware proved to be most cost-efficient. This study shows that actively managing the roll-out of feedback devices can increase their impacts on energy-conservation both effectively and cost-efficiently.

Description: Following the decisions of the Paris climate conference at the end of 2015 as well as similar announcements e.g. from the G7 in Elmau (Germany) in the summer of 2015, long-term strategies aiming at (almost) full decarbonisation of the energy systems increasingly move into the focus of climate and energy policy. Deep decarbonisation obviously requires a complete switch of energy supply towards zero GHG emission sources, such as renewable energy. A large number of both global as well as national climate change mitigation scenarios emphasize that energy efficiency will likewise play a key role in achieving deep decarbonization. However, the interdependencies between a transformation of energy supply on the one hand and the role of and prospects for energy efficiency on the other hand are rarely explored in detail. This article explores these interdependencies based on a scenario for Germany that describes a future energy system relying entirely on renewable energy sources. Our analysis emphasizes that generally, considerable energy efficiency improvements on the demand side are required in order to have a realistic chance of transforming the German energy system towards 100 % renewables. Efficiency improvements are especially important if energy demand sectors will continue to require large amounts of liquid and gaseous fuels, as the production of these fuels are associated with considerable energy losses in a 100 % renewables future. Energy efficiency on the supply side will therefore differ considerably depending on how strongly the use of liquid and gaseous fuels in the various demand sectors can be substituted through the direct use of electricity. Apart from a general discussion of the role of energy efficiency in a 100 % renewable future, we also look at the role of and prospects for energy efficiency in each individual demand sector.

Description: India is currently at a crucial juncture where it is aiming for economic growth to meet the basic needs of its 1.2 billion people. However, so far this growth has resulted in energy shortages and the increasing use of limited resources. This policy brief series is about decoupling, i.e. improving efficiency to reduce the resources and energy needed for this growth and meet the country's increasing development needs. The construction sector is highly resource and energy intensive; it is therefore imperative that it moves towards a path of environmental sustainability. This transition is likely to be achieved by decoupling both resource and energy use from the sector's growth. Decision-makers in the sector will play a crucial role in achieving this. The aim of this policy brief series is to inform decision-makers in India at central government and state level about the current status of research, policy and institutions in the Indian construction sector and to identify key drivers and barriers. Finally, practical recommendations will be made for decision-makers about how to promote decoupling of resource and energy use from growth in the construction sector. Policy brief 1 focuses on the baseline for decoupling in the Indian construction sector. The study draws attention to the existing scenario in terms of key policies, research and institutions linked to resources and energy in the sector.

Description: Over the years Shell has produced a number of scenario studies on key energy issues. These have included studies on important energy consumption sectors such as passenger cars and commercial vehicles (lorries and buses) and the supply of energy and heat to private households, as well as studies on the state of and prospects for individual energy sources and fuels, including biofuels, natural gas and liquefied petroleum gas. Shell has been involved in hydrogen production as well as in research, development and application for decades, with a dedicated business unit, Shell Hydrogen. Now, in cooperation with the Wuppertal Institute in Germany, Shell has conducted a study on hydrogen as a future energy source. The study looks at the current state of hydrogen supply path- ways and hydrogen application technologies and explores the potential and prospects for hydrogen as an energy source in the global energy system of tomorrow. The study focuses on the use of hydrogen in road transport and specifically in fuel cell electric vehicles (FCEVs), but it also examines non-automotive resp. stationary applications.

Description: To minimize the impact of end-of life vehicles on the environment they have to be managed in accordance with the legal requirements. Against this background it is important to comprehend the whereabouts of permanently decommissioned passenger cars. From the available statistical sources it was only possible to account for the whereabouts in parts for the last years. The subject-matter of the research project was the closure of this "statistical gap" to the maximum extent possible. The objectives of the project were the identification of the possible reasons underlying the "statistical gap", the determination, itemisation and, to the maximum extent possible, quantification of information on the actual whereabouts of permanently decommissioned vehicles and the development of measures and instruments that can be used to permanently improve the data situation.

Description: Energy intensive industries are one of the fields in which strong increases of energy efficiency and deep decarbonisation strategies are particularly challenging. Although European energy intensive industries have already achieved significant energy and greenhouse gas reductions in the past, much remains to be done to make a significant contribution to achieving European as well as national climate mitigation targets of greenhouse gas emission reductions by -80% or more (compared to the baseline of 1990). North Rhine-Westphalia (NRW) is a European hotspot for coping with this challenge, accommodating more than 10% of the energy intensive industries of the EU28. It is also the first German state to have adopted its own Climate Law, enacting state-wide CO2 emission reductions by 80% until 2050 compared to 1990. The state government initiated the project "Platform Climate Protection and Industry North-Rhine Westphalia" to identify and develop the necessary far-reaching low carbon innovation strategies for energy intensive industries. Heart of the project was a dialogue process, which involved a broad spectrum of stakeholders from steel, chemical, aluminium, cement, glass and paper producing industries. Besides enhancing and broadening the knowledge on high efficiency and low-carbon technologies within industries, the aim was to explore possible pathways and preconditions for the application of these technologies in energy intensive industries as well as to strengthen the motivation of companies for initiatives and investments in technologies with lower CO2 emissions. The results of the dialogue shall provide a basis for a possible low-carbon industry roadmap NRW and may also serve as an example for other industrialized regions in the EU and globally. The paper sketches the structured dialogue process with the stakeholders from companies as well as industrial associations and presents the learnings regarding the engagement of energy intensive industries into ambitious climate policies on a regional level. These include existing limitations as well as chances in the respective sectors on the state level, regarding their economic and technical structures as well as their innovation systems. The findings are based on more than a dozen stakeholder workshops with industry companies and more than 150 individual representatives of NRW's energy intensive industries as well as on background research in the initial phase of the project.

Description: Washing laundry is one of the most widespread housework tasks in the world. Washing machines, performing this task already in many private households, are now responsible for about 2% of the global electricity consumption. Worldwide, more than 840 million domestic washing machines are in use, with an annual consumption exceeding 92 TWh of electricity and 19 billion m3 of water as well as causing emissions of more than 62 megatons CO2eq. In North America, Western Europe and Pacific OECD countries, most households own a washing machine. In these economies standard and label policy programs already addressed and reduced the specific electricity and water consumption of washing machines per wash cycle. Nevertheless, in other world regions, the level of ownership for washing machines is still well below saturation and high growth rates can be observed in developing and newly industrialising countries. As washing machines use water, electricity, chemical substances and process time as resources, also the absolute worldwide resource consumption and emissions of these appliances are still on the rise. Due to different washing habits and practices as well as types of washing machines in different world regions, the specific consumption of resources for doing the laundry is varying to a large extent. On that score, this paper presents an overview of the current situation worldwide as well as respective saving potentials. Bottom-up scenario calculations, carried out for the 11 world regions according to the Intergovernmental Panel on Climate Change classification, show that large energy, water and greenhouse gas savings are possible with the "Best Available Technologies" today, and even higher savings will be possible with next generation "Best Not yet Available Technologies". According to model results, these savings are usually also very cost-effective. Following these calculations, it is highly advisable for policymakers world-wide to pay even more attention to improvement options in order to implement ambitious and product-specific policy packages, including minimum performance standards and labelling schemes.

Description: One of the most pressing issues of climate policy is how to get building owners to invest in the energy efficiency of their homes. The German federal government has set the goal of decreasing the energy demand of buildings by 80 to 95 percent until 2050. One pillar of the strategy to support building owners in this task is the provision of targeted energy advice, to both motivate owners to implement an energy efficiency refurbishment and help them to choose the most efficient measures. In this paper we analysed the demand for energy advice in three German cities of the Ruhr area finding the number of energy consulting provided to be extremely low compared to the stated goals. Based on the approach of joint knowledge production we invited stakeholders from the three cities to participate in a series of workshops in order to develop ideas how to more effectively bring homeowners and energy advisors together. As a result, different energy advice experiments were co-operatively developed for each city targeting different groups by using tailored channels for outreach. The evaluation of both the process as well as the outcome of the experiments indicates that while joint knowledge production is a suitable approach to enable knowledge transfer and formation of new networks between different stakeholders in science and practice, it does not necessarily lead to superior approaches with regard to effectively addressing a policy issue at hand. Apart from the experiment in which the window of opportunity change of building ownership was taken advantage of, participation of target groups in the experiments has been soberingly low, underlining the value of so-called trigger points when designing effective outreach strategies to building owners.

Description: Energy efficiency improvements have numerous benefits/impacts additional to energy and greenhouse gas savings, as has been shown and analysed e.g. in the 2014 IEA Report on "Multiple Benefits of Energy Efficiency". This paper presents the Horizon 2020-project COMBI ("Calculating and Operationalising the Multiple Benefits of Energy Efficiency in Europe"), aiming at calculating the energy and non-energy impacts that a realisation of the EU energy efficiency potential would have in 2030. The project covers the most relevant technical energy efficiency improvement actions and estimates impacts of reduced air pollution (and its effects on human health, eco-systems/crops, buildings), improved social welfare (incl. disposable income, comfort, health, productivity), saved biotic and abiotic resources, and energy system, energy security, and the macroeconomy (employment, economic growth and public budget). This paper explains how the COMBI energy savings potential in the EU 2030 is being modelled and how multiple impacts are assessed. We outline main challenges with the quantification (choice of baseline scenario, additionality of savings and impacts, context dependency and distributional issues) as well as with the aggregation of impacts (e.g. interactions and overlaps) and how the project deals with them. As research is still ongoing, this paper only gives a first impression of the order of magnitude for additional multiple impacts of energy efficiency improvements may have in Europe, where this is available to date. The paper is intended to stimulate discussion and receive feedback from the academic community on quantification approaches followed by the project.

Description: India is currently at a crucial juncture where it is aiming for economic growth to meet the basic needs of its 1.2 billion people. However, so far this growth has resulted in energy shortages and the increasing use of limited resources. This policy brief series is about decoupling, i.e. improving efficiency to reduce the resources and energy needed for this growth and meet the country's increasing development needs. The construction sector is highly resource and energy intensive; it is therefore imperative that it moves towards a path of environmental sustainability. This transition is likely to be achieved by decoupling both resource and energy use from the sector's growth. Decision-makers in the sector will play a crucial role in achieving this. The aim of this policy brief series is to inform decision-makers in India at central government and state level about the current status of research, policy and institutions in the Indian construction sector and to identify key drivers and barriers. Finally, practical recommendations will be made for decision-makers about how to promote decoupling of resource and energy use from growth in the construction sector. Policy brief 3 focuses on recommendations both at national and state level on the possible interventions that could result in resource and energy use being decoupled from growth in the Indian construction sector. Lack of a comprehensive policy on resource efficiency and the possibility of using secondary raw materials to obtain resource and impact decoupling continue to be the key issues that India will have to grapple with in the years to come.

Description: One of the main objectives of impact assessments is to identify potentially significant impacts. However, determining this significance has received very limited attention as a procedural step in social impact assessments. Consequently, only limited research and documentation exists on approaches, survey tools and evaluation methods, especially with regard to participatory approaches and combined participatory-technical approaches. This study aims to address this research gap by developing and applying a joined participatory and technical impact significance evaluation. The approach is applied in a case study which analysed the livelihood impacts of the large-scale concentrated solar power plant NOORO I in Ouarzazate, Morocco. The analysis shows that although different approaches and significance criteria must be applied when involving both local stakeholders and experts, the linked analysis offers more robust results and an improved basis for decision-making. Furthermore, it was observed in the case study that impacts affecting the social, cultural and political spheres were more often considered significant than impacts affecting the physical and material livelihood dimensions. Regarding sustainability assessments of large-scale renewable energy plants, these findings underline the importance (as for other large-scale infrastructure developments) of placing greater emphasis on the inclusion of social aspects in impact assessments.

Description: The brochure summarises the project's objectives and methodological approach, its key findings as well as conclusions. Both case studies have shown that technological solutions for low carbon development should be embedded in a well-developed institutional framework to foster their deployment and implementation. Therefore, recommendations for Wuxi include examples of innovative and integrated technical projects for increasing energy and resource efficiency, combining them with recommendations for the development of institutional frameworks. One element of such a framework could be a local energy agency in Wuxi, which would offer support and expertise to potential investors in low carbon technologies. Also for the German pilot region, the brochure offers concrete recommendations how to facilitate low carbon planning within the region.

Description: There is significant potential for family farming to contribute to several dimensions of the Sustainable Development Goals adopted by the United Nations General Assembly in 2015. Our research aims to provide insights to help strengthen sustainable family farming. We focus on initiatives that have advanced sustainable family farming innovations in Colombia and analyse the factors and dynamics that have led to the limited penetration of those innovations across the country. To that aim, a transformative methodology is applied involving representatives of farmers' associations, supporting organisations and researchers from various disciplinary fields. We analyse the network of initiatives against the conceptual background of sociotechnical niches and identify a stable niche where generic lessons are being systematically identified and used to establish replication projects. However, this niche is still limited in its breadth, which results in a low capacity for expansion and a strong dependency on international donors for reproducing experiences. Specific recommendations are outlined for broadening the type of actors involved in the interpretation and dissemination of lessons from the niche. Moreover, we outline suggestions for further research and conceptualisation in two directions: for exploring effective ways of broadening the niche and translating niche lessons to state policies and for deepening the understanding of interactions between the niche and other levels.

Description: The paper describes patterns of resource use related to German households' equipment. Using cluster analysis and material flow accounting, data on socio-demographic characteristics, and expenditures on fuel, electricity and household equipment allow for a differentiation of seven different household types. The corresponding resource use, expressed in Material Footprint per person and year, is calculated based on cradle-to-gate material flows of average household goods and the related household energy use. Our results show that patterns of resource use are mainly driven by the use of fuel and electricity and the ownership of cars. The quantified Material Footprints correlate to social status and are also linked to city size, age and household size. Affluent, established and/or younger families living in rural areas typically show the highest amounts of durables and expenditures on non-durables, thus exhibiting the highest use of natural resources.

Description: This report is a deliverable of the project "Bridging the raw materials knowledge gap for reuse and remanufacturing professionals" (ReUK) and of the second work package "Identification of knowledge gaps and industry needs". Funded by the Knowledge and Innovation Community for Raw Materials, ReUK will develop life-long education services tailor-made for the needs of the reuse- and remanufacturing sector in Europe. The present "Report on ten knowledge gaps" represents a further key step in delivering these services.

Description: Heat integration and industrial symbiosis have been identified as key strategies to foster energy efficient and low carbon manufacturing industries (see e.g. contribution of Working Group III in IPCC's 5th assessment report). As energy efficiency potentials through horizontal and vertical integration are highly specific by site and technology they are often not explicitly reflected in national energy strategies and GHG emission scenarios. One of the reasons is that the energy models used to formulate such macro-level scenarios lack either the necessary high technical or the spatial micro-level resolution or both. Due to this lack of adequate tools the assumed huge existing potentials for energy efficiency in the energy intensive industry cannot be appropriately appreciated by national or EU level policies. Due to this background our paper describes a recent approach for a combined micro-macro energy model for selected manufacturing industries. It combines national level technical scenario modelling with a micro-modelling approach analogous to total site analysis (TSA), a methodology used by companies to analyse energy integration potentials on the level of production sites. Current spatial structures are reproduced with capacity, technical and energy efficiency data on the level of single facilities (e.g. blast furnaces) using ETS data and other sources. Based on this, both, the investments in specific technologies and in production sites are modelled and the evolvement of future structures of (interconnected) industry sites are explored in scenarios under different conditions and with different objectives (microeconomic vs. energy efficiency optimization). We further present a preliminary scenario that explores the relevance of these potentials and developments for the German steel industry.

Description: The German federal state of North Rhine-Westphalia (NRW) is home to important clusters of energy-intensive basic materials industries. 15% of the EU's primary steel as well as 15% of high-value base chemicals are produced here. Together with refinery fuels, cement, lime and paper production (also overrepresented in NRW) these are the most carbon-intensive production processes of the industrial metabolism. To achieve the ambitious regional and national climate goals without relocating these clusters, carbon-neutral production will have to become standard by mid-century. We develop and evaluate three conceptual long-term scenarios towards carbon-neutral industry systems for NRW for 2050 and beyond: * a first scenario depending on carbon capture and storage or use for heavy industries (iCCS), * a second scenario sketching the direct electrification of industrial processes (and transport) and * a third scenario relying on the import of low carbon energies (e.g. biomass, and synthetic fuels (like methanol) for the use in industries and transport. All scenarios share the assumption that electricity generation will be CO2-neutral by 2050. For all three scenarios energy efficiency, primary energy demand for energy services and feedstock as well as the carbon balance are quantified. We apply a spatial-explicit analysis of production sites to allow for discussion of infrastructure re-use and net investment needs. Possible symbiotic relations between sectors are also included. The robustness of the three conceptualised future carbon-neutral industry systems is then analysed using a multi-criteria approach, including e.g. energy security issues and lock-ins on the way to 2050.

Description: Accelerating the diffusion of domestic biogas is considered to be a promising option for reaching the goal of universal access to energy by 2030, particularly for the provision of cooking energy for rural populations in developing countries. The aim of this study is to develop a systematic account of the factors that influence the diffusion of domestic biogas technologies. To achieve this objective, a three step analysis approach is applied. In the first step, a conceptual model is built based on insights from scholars that have been studying the diffusion of energy innovations in rural contexts. In the next step, a qualitative content analysis of scientific literature is undertaken to test and refine the categories proposed by the conceptual model and to systematically organise the empirical evidence of the factors that influence the diffusion of domestic biogas in developing and emerging countries. The systemised evidence is used to identify the components and interactions between the household configurations and socio-economic context that determine both the adoption process at household level and the overall technology diffusion. Finally, in the last step, we reflect on the implications of the resultant systematic conceptualisation regarding the purpose and design of programmes promoting the dissemination of domestic biogas technologies.

Description: India's present development trajectory is at a crucial juncture with a requirement to meet the demands of a population of over 1.2 billion while ensuring environmental sustainability. The resulting economic growth over the past two decades has over-exploited finite natural resources and led to tremendous environmental degradation. Therefore, decoupling economic growth from resource consumption is crucial in the transformation towards a green economy. Building construction is one of the most resource-intensive sectors, as well as creating a high impact on the environment. This study analyzes existing mechanisms in India's building construction sector that attempt to decouple economic growth from resource use and environmental impacts. The key contributors for decoupling are analyzed. Recommendations for regulations, market incentives, transparency, data monitoring and capacity-building are provided for an array of policy initiatives targeted at political and financial decision-makers at the national, state and local levels for different buildings.

Description: Germany and Japan have both gained substantial experience with hydrogen production and applications, albeit with focus on different sectors. They also share similar drivers for hydrogen development and, of course, similar technical and economic opportunities and challenges. However, there also are relevant differences in the policy priorities and approaches. Notwithstanding differing emphases and patterns, the two countries share three main drivers for hydrogen development and deployment: climate mitigation and other environmental goals, energy supply diversification, and technological leadership. In this context, hydrogen has been identified by the German and the Japanese governments during the Energy Policy Dialogue as having potential for closer cooperation. The authors of this study provide an overview of demand-side deployment by sector (residential, transport, industry, power generation and power-to-x) for both countries, as well as of their hydrogen policy debates, key institutions, R&D programs and demonstration projects. They also present a short survey on relevant international platforms and initiatives in which Japan and Germany participate. On the basis of a meta-analysis of the role of hydrogen in 18 long-term energy system scenarios for Germany and 12 scenarios for Japan, this study draws conclusions on the possible role of hydrogen in the long term energy policy debates of both countries. Subsequently, the authors discuss sustainability criteria and certification schemes for clean hydrogen, compare the greenhouse gas intensity of different hydrogen supply chains and provide a data-based analysis to identify countries which could become important suppliers of clean hydrogen.

Description: Many countries are increasingly investing in renewable energy technologies to meet growing energy demands and increase the security of their energy supply. This development is also evident in the Middle East and North Africa (MENA) region, where renewable energy targets and policies have evolved rapidly in recent years. There is a steady increase in both the number of planned and implemented solar photovoltaic (PV) but also of solar thermal projects in form of Concentrating Solar Power (CSP) plants. Many of these installations are designed as large utility-scale systems. Despite the fact that these types of large-scale projects can have significant effects on local communities and their livelihoods, the existing research into the social impacts of such large-scale renewable energy infrastructures at local level is limited. However, assessing and managing these impacts is becoming increasingly important to reduce risks to both the affected communities and to the project and businesses activities. In order to provide more robust evidence on the local effects, this research study reviews the social impacts of large-scale renewable energy infrastructure in the MENA region based on a case study of the NOORo I CSP plant in Ouarzazate, Morocco. Data collected during two empirical field studies, in combination with expert interviews and secondary data analysis, provides detailed evidence on the type and significance of livelihood impacts of the NOORo I CSP plant. The analysis results in a consolidated list of 30 impacts and their significance levels for different stakeholder groups including farmers, young people, women, community representatives and owners of small and medium enterprises. The results show that, overall, the infrastructure development was received positively. The review also indicates that factors identified as having effects on the sustainability of local livelihoods are mainly related to information management and benefit distribution, rather than physical or material aspects.

Description: In the context of the German-Korean Energy Policy Dialogue, integration of renewable power sources and smart grids have been identified as topics with high relevance. This study aims to support mutual learning and exploration of new fields for collaboration by identifying similarities and differences in the respective status quos, strategies and policies in both countries. After a short introduction to the South Korean energy situation, Chapter 2 provides an overview of the South Korean power market, its situation regarding renewable power sources and the Korean definition of smart grids. Chapter 3 of this study highlights the major South Korean energy strategies and regulatory frameworks relevant to integration of renewable energies and smart grids. In Chapter 4, the status and perspectives of renewable energy sources integration and smart grids in South Korea are discussed, presenting various demonstrative examples, new business models and the current situation of technology deployment. Chapter 5 puts South Korea in the global context and compares it to Germany. Finally, Chapter 6 draws conclusions and presents recommendations on suitable areas for mutual learning.

Description: Sustainable supply chain management can drive sustainability. The interpretation of Sustainable supply chain management as an upstreamoriented strategy has an important, but limited potential. Addressing consumer needs and lifestyles downstream can increase the sustainability potentials of Sustainable supply chain management.

Description: This paper is the first of its kind, providing an identification of the problems encountered in all documented global experiences of cultivating the Jatropha curcas plant, covering 22 case studies. Influential components of the biodiesel production (stakeholders like government, farmers and enterprises as well as resources such as land and water) and how they are interconnected are pinpointed. In addition, the article gives recommendations to the main actors under ecological and socio-economic criteria to ensure a sustainable production of J. curcas oil in regions with appropriate climatic conditions for the plant's viability. Hence, this analysis of experiences discusses the following questions: What are the reasons and factors for the previous unsuccessful and unsustainable cultivation of J. curcas for producing biodiesel? Can it be lucrative and simultaneously achieve poverty alleviation/job creation under the constraints of efficient use of resources (land and water)?

Description: Objective: The aim of the present article is to conduct an integrated assessment in order to explore whether CCS could be a viable technological option for significantly reducing future CO2 emissions in China. Methods: In this paper, an integrated approach covering five assessment dimensions is chosen. Each dimension is investigated using specific methods (graphical abstract). Results: The most crucial precondition that must be met is a reliable storage capacity assessment based on site-specific geological data. Our projection of different trends of coal-based power plant capacities up to 2050 ranges between 34 and 221 Gt of CO2 that may be captured from coal-fired power plants to be built by 2050. If very optimistic assumptions about the country’s CO2 storage potential are applied, 192 Gt of CO2 could theoretically be stored as a result of matching these sources with suitable sinks. If a cautious approach is taken, this figure falls to 29 Gt of CO2. In practice, this potential will decrease further with the impact of technical, legal, economic and social acceptance factors. Further constraints may be the delayed commercial availability of CCS in China; a significant barrier to achieving the economic viability of CCS due to a currently non-existing nation-wide CO2 pricing scheme that generates a sufficiently strong price signal; an expected life-cycle reduction rate of the power plant's greenhouse gas emissions of 59-60%; and an increase in most other negative environmental and social impacts. Conclusion and practice implications: Most experts expect a striking dominance of coal-fired power generation in the country's electricity sector, even if the recent trend towards a flattened deployment of coal capacity and reduced annual growth rates of coal-fired generation proves to be true in the future. In order to reduce fossil fuel-related CO2 emissions to a level that would be consistent with the long-term climate protection target of the international community to which China is increasingly committing itself, this option may require the introduction of CCS. However, a precondition for opting for CCS would be finding robust solutions to the constraints highlighted in this article. Furthermore, a comparison with other low-carbon technology options may be useful in drawing completely valid conclusions on the economic, ecological and social viability of CCS in a low-carbon policy environment. The assessment dimensions should be integrated into macro-economic optimisation models by combining qualitative with quantitative modelling, and the flexible operation of CCS power plants should be analysed in view of a possible role of CCS for balancing fluctuating renewable energies.

Description: Jordan's electricity system has and continues to experience considerable pressures for reform due to continuous increase of electricity demand combined with high dependency on imported fossil fuels and a partially subsidised electricity market. In this paper we use the transitions pathways to examine and analyse pressures on the regime in relation to plausible future developments of particular niches such as renewable energy technologies. Our analysis is methodologically distinct in that we explicitly identify mechanisms operating in the system and relate those to existing scenarios to assess future developments. Currently, we see future developments being sensitive to the actions of key regime actors.

Description: The Deep Decarbonization Pathways Project (DDPP) is a collaborative global initiative led by IDDRI and SDSN that aims to demonstrate how individual countries can transition to a low-carbon economy preferably consistent with the internationally agreed target of limiting the increase in global temperature to less than 2°C. Achieving this target will require a profound transformation of energy systems by mid-century, a "deep decarbonization". The project comprises 16 research teams composed of leading institutions from the world's largest GHG emitting countries: Australia, Brazil, Canada, China, France, Germany India, Indonesia, Italy, Japan, Mexico, Russia, South Africa, South Korea, United Kingdom, and United States. Each team is exploring what is required to achieve this transformation in their own country's economy while taking into account socio-economic conditions, development aspirations, infrastructure stocks, natural resource endowments, and other relevant factors. The DDPP country study for Germany explores what is required to achieve deep decarbonization in Germany. It has been conducted by the Wuppertal Institute for Climate, Environment and Energy, with the support of Stiftung Mercator. The study discusses how the German government's target of reducing domestic GHG emissions by 80 to 95% by 2050 (versus 1990) can be reached.

Description: This article analyses drivers and barriers to returning and recycling mobile phones and their consideration in existing communication and collection campaigns. This is an important issue based on the fact that the mobile phone market is growing rapidly. In 2015 there are nearly 7 billion global mobile cellular subscriptions. This means that, at least theoretically, everyone in the world has access to mobile communication services (ITU 2015). However, the production of mobile phones is linked to an increasing use of natural resources: the "ecological rucksack" of a mobile phone is equal to about 75 kg of resources (Nordmann et al. 2015); while the global recycling rate of mobile phones is under 10 per cent (Nokia 2008, Tanskanen 2012). In order to adress this issue, the main factors that influence return and recycling behaviour (focussing on mobile phones) will be discussed in chapter 2 of this article. The theoretical analysis is based on the norm activation model by Ellen Matthies (2005). This analysis will be complemented by empirical data and findings generated in the research project "Return and use of old mobile phones", funded by the German Ministry of Education and Research (Wuppertal Institute for Climate, Environment, Energy/Institute for Advanced Sustainability Studies, 2012-2014). To conclude, we will identify and operationalise essential components of mobile phone communication and collection campaigns, based on the theoretical approach of Matthies, literature and empirical studies, in order to develop a set of criteria for analysing and rating such communication and collection campaigns. The results show that economic incentives as well as education and communication play a very important role in initiating more sustainable behavioural patterns in the ICT sector. The role of emotional factors is often underestimated in the development of communication activities. In summary, successful mobile phone communication and collection campaigns require a combination of several institutional, economic, social and emotional factors.

Description: Distributed cogeneration units are flexible and suited to providing balancing power, thereby contributing to the integration of renewable electricity. Against this background, we analysed the technical potential and ecological impact of CHP (combined heat and power) systems on the German minutes reserve market for 2010, 2020 and 2030. Typical CHP plants (from 1 to 2800 kWel) were evaluated in relation to typical buildings or supply cases in different sectors. The minutes reserve potential was determined by an optimisation model with a temporal resolution of 15 min. The results were scaled up to national level using a scenario analysis for the future development of CHP. Additionally, the extent to which three different flexibility measures (double plant size/fourfold storage volume/emergency cooler) increase the potential provision of balancing power was examined. Key findings demonstrate that distributed CHP could contribute significantly to the provision of minutes reserve in future decades. Flexibility options would further enhance the theoretical potential. The grid-orientated operating mode slightly increases CO2 emissions compared to the heat-orientated mode, but it is still preferable to the separate generation of heat and power. However, the impacts of a flexible mode depend greatly on the application and power-to-heat ratio of the individual CHP system.

Description: In this paper a new method for the evaluation and comparison of potential future electricity systems is presented. The German electricity system in the year 2050 is used as an example. Based on a comprehensive scenario analysis defining a corridor for possible shares of fluctuating renewable energy sources (FRES) residual loads are calculated in a unified manner. The share of electricity from PV and wind power plants in Germany in the year 2050 is in a range of 42-122% and the load demand has a bandwidth of around 460-750 TWh. The residual loads are input for an algorithm that defines a supplementary mix of technologies providing flexibility to the system. The overall system layout guarantees the balance of generation and demand at all times. Due to the fact that the same method for residual load calculation and mixture of technologies is applied for all scenarios, a good comparability is guaranteed and we are able to identify key characteristics for future developments. The unique feature of the new algorithms presented here is the very fast calculation for a year-long simulation with hourly or shorter time steps taking into account the state of charge or availability of all storage and flexibility technologies. This allows an analysis of many different scenarios on a macro-economic level, variation of input parameters can easily be done, and extensive sensitivity analysis is possible. Furthermore different shares of FRES, CO2-emission targets, interest rates or social acceptance of certain technologies can be included. The capabilities of the method are demonstrated by an analysis of potential German power system layouts with a base scenario of 90% CO2-reduction target compared to 1990 and by the identification of different options for a power sector with a high degree of decarbonisation. The approach also aims at a very high level of transparency both regarding the algorithms and regarding the input parameters of the different technologies taken into account. Therefore this paper also gives a comprehensive and complete overview on the technology parameters used. The forecast on all technologies for the year 2050 regarding technical and economic parameters was made in a comprehensive consultation process with more than 100 experts representing academia and industry working on all different technologies. An extensive analysis of options for the design of potential German energy supply systems in 2050 based on the presented methodology will be published in a follow-up paper.

Description: China is very active in the research and development of CO2 capture and storage technologies (CCS). However, existing estimates for CO2 storage capacity are very uncertain. This uncertainty is due to limited geological knowledge, a lack of large-scale research on CO2 injection, and different assessment approaches and parameter settings. Hence storage scenarios represent a method that can be used by policy makers to demonstrate the range of possible storage capacity developments, to help interpret uncertain results and to identify the limitations of existing assessments. In this paper, three storage scenarios are developed for China by evaluating China-wide studies supplemented with more detailed site- and basin-specific assessments. It is estimated that the greatest storage potential can be found in deep saline aquifers. Oil and gas fields may also be used. Coal seams are only included in the highest storage scenario. In total, the scenarios presented demonstrate that China has an effective storage capacity of between 65 and 1551 Gt of CO2. Furthermore, the authors emphasise a need for action to harmonise storage capacity assessment approaches due to the uncertainties involved in the capacity assessments analysed in this study.

Description: A key factor to energy-efficiency of heating in buildings is the behavior of households, in particular how they ventilate rooms. Energy demand can be reduced by behavioral change; devices can support this by giving feedback to consumers on their behavior. One such feedback device, called the "CO2 meter", shows indoor air-quality in the colors of a traffic light to motivate so called "shock ventilation", which is energy-efficient ventilation behavior. The following effects of the "CO2 meter" are analyzed: (1) the effect of the device on ventilation behavior within households, (2) the diffusion of "CO2 meter" to other households, and (3) the diffusion of changed behavior to households that do not adopt a "CO2 meter". An agent-based model of these processes for the city of Bottrop (Germany) was developed using a variety of data sources. The model shows that the "CO2 meter" would increase adoption of energy-efficient ventilation by c. 12% and reduce heating demand by c. 1% within 15 years. Technology diffusion was found to explain at least c. 54% of the estimated energy savings; behavior diffusion explains up to 46%. These findings indicate that the "CO2 meter" is an interesting low-cost solution to increase the energy-efficiency in residential heating.

Description: In October 2014, the European Council agreed on a target of improving overall energy efficiency by at least 27 per cent by 2030. According to the European Council's conclusions, this target should not be translated into nationally binding targets. Nevertheless individual Member States are free to set higher national objectives if desired. However, it is difficult to assess the degree of ambition of a national target because so far not much light has been shed upon the exact size of the untapped efficiency potentials. This paper provides an in-depth analysis and comparison of existing studies on energy efficiency potentials in the European Union's (EU) Member States by 2030. It includes a structured overview of the results, information on the quality of the available data and suggestions for improvement. The review shows that comprehensive studies on national energy efficiency potentials are rare and hardly comparable. The existing studies agree on the existence of significant potentials for energy efficiency. Their outcomes, however, vary significantly in terms of national levels. Assuming low policy intensity, energy savings between 10 and 28 per cent could be realised by 2030 compared to a baseline development, in the case of high policy intensity 7-44 per cent. Technical energy efficiency potentials in the different EU Member States are estimated at 14-52 per cent. On average, energy savings of 27 per cent by 2030 appear to be feasible with significant policy effort. We conclude that the deviation in Member States' energy efficiency potentials resulting from different studies represents an indication of the so far poor quality of underlying data. In order to allow for a concretisation of efficiency potential estimates, the comparability and detail of information sources should be improved.

Description: The economic assessment of low-carbon energy options is the primary step towards the design of policy portfolios to foster the green energy economy. However, today these assessments often fall short of including important determinants of the overall cost-benefit balance of such options by not including indirect costs and benefits, even though these can be game-changing. This is often due to the lack of adequate methodologies. The purpose of this paper is to provide a comprehensive account of the key methodological challenges to the assessment of the multiple impacts of energy options, and an initial menu of potential solutions to address these challenges. The paper first provides evidence for the importance of the multiple impacts of energy actions in the assessment of low-carbon options. The paper identifies a few key challenges to the evaluation of the co-impacts of low-carbon options and demonstrates that these are more complex for co-impacts than for the direct ones. Such challenges include several layers of additionality, high context dependency, and accounting for distributional effects. The paper continues by identifying the key challenges to the aggregation of multiple impacts including the risks of overcounting while taking into account the multitude of interactions among the various co-impacts. The paper proposes an analytical framework that can help address these and frame a systematic assessment of the multiple impacts.

Description: Rather than examining aggregate emissions trends, this study delves deep into the dynamics affecting each sector of the EU energy system. It examines the structural changes taking place in power production, transport, buildings and industry, and benchmarks these with the changes required to reach the 2030 and 2050 targets. In so doing it aims to influence both the ambition and direction of future policy decisions, both at Member State and EU level. In order to assess the adequacy of the EU and its Member States policies with the 2030 and 2050 decarbonisation objectives, this study goes beyond the aggregate GHG emissions or energy use figures and analyse the underlying drivers of emission changes, following a sectoral approach (power generation, buildings, industry, and transport). Historical trends of emission drivers are compared with the required long-term deep decarbonisation pathways, which provide sectoral "benchmarks" or "corridors" against which to analyse the rate and direction of historical change for each Member State and the EU in aggregate. This approach allows the identification of the necessary structural changes in the energy system and policy interventions to reach deep decarbonisation, and therefore the comparison with the current policy programs at European and Member State level.

Description: This study conducted by Wuppertal Institute and Germanwatch explores how the social pillar of sustainability at the local level could be met in Concentrated Solar Power (CSP) projects. For this purpose, the authors evaluate the livelihood dimension of CSP technology based on a case study conducted on the 160 MW pilot CSP plant Nooro I in Ouarzazate, Morocco.

Description: The climate impact of the iron and steel industry can be mitigated through increased energy efficiency, emission efficiency, material efficiency, and product use efficiency resulting in reduced product demand. For achieving ambitious greenhouse gas (GHG) mitigation targets in this sector all measures could become necessary. The current paper focuses on one of those four key measures: emission efficiency via innovative primary steelmaking technologies. After analysing their techno-economical potential until 2100 in part A of this publication, the current research broadens the evaluation scope for the crucial year 2050, based on a Multicriteria-Analysis (MCA). 12 criteria from five different categories ("technology", "society and politics", "economy", "safety and vulnerability" and "ecology") are used to assess the same four future steelmaking technologies in a systematic and holistic way in Germany, as one possible location. The technologies in focus are the blast furnace route (BF-BOF), blast furnace with carbon capture and storage (BF-CCS), hydrogen direct reduction (H-DR), and iron ore electrolysis (EW). These four technologies have been selected, as explained in part A of this paper, because they are the most commonly discussed technological options under discussion by policymakers and the iron and steel industry. The results of the current work should provide decision makers in industry and government with a long-term guidance on technological choices. In 2050 the MCA shows significantly higher preference scores for the two innovative routes H-DR and EW compared to the blast furnace based routes. The main reasons being higher scores in the economical and environmental criteria. BF-CCS shows its greatest weakness in the social acceptance and the safety and vulnerability criteria. BF-BOF has the lowest economy and ecology score of all assessed routes, which is due to the projected high cost for carbon dioxide emission and increasing prices for fossil fuels. A first indicative trend assessment from today towards 2050 shows that H-DR is the preferred MCA option from today on. Three exemplary weighting distributions (representing the perspectives of the steel industry, environmental organisations and the government), used to simulate different stakeholder angle of view, don't have a strong influence on the overall evaluation of the steelmaking routes. The results remain very similar, with the highest scores for the innovative routes (H-DR and EW). This leads to the conclusion that EW and in particular H-DR can be identified as the preferred future steelmaking technology across different perspectives. Specific innovation efforts and dedicated programs are necessary to minimize the time until marketability and to share the development burden. The similarity of the MCA results from different perspectives indicates a great opportunity to reach a political consensus and to work together towards a common future goal. Regarding the pressing time horizon a concentrated engagement for one (or few) technological choices would be highly recommended.

Description: Energy systems with high shares of renewable electricity are feasible, but require balancing measures such as storage, grid exchange or demand-side management to maintain system stability. The demand for these balancing options cannot be assessed separately since they influence each other. Therefore, a model was developed to analyze these mutual dependencies by optimizing a concerted use of balancing technologies. This model is presented here. It covers the European electricity system in hourly resolution. Since this leads to a large optimization problem, several options for reducing system complexity are presented. The application of the model is illustrated with a case study outlining the effects of pumped hydro storage and controlled charging of electric vehicles in central Europe.

Description: There is an increasing pressure that enhanced and novel energy technologies are swiftly adopted by the market to ensure meeting the energy and climate targets. An important issue with such novel developments is their risk to be stuck in the "valley of death", i.e. that their transition to the market is delayed or unsuccessful. Publicly supported demonstration projects could help to bridge the valley of death by reducing barriers to the adoption caused by missing information and perceived risks. A challenge for technology demonstrations in the industrial context is their often high investments that are required to prove their real-world benefits. Given the magnitude of such investments, it becomes crucial that public funding focuses on the most promising demonstration proposals. Structured evaluation processes can help to facilitate the identification of promising proposals and to improve the quality and transparency of decisions. This paper deals with a corresponding multi-staged multi-criteria decision support system (DSS) suggested to the German Federal Ministry for Economic Affairs and Energy. It deals with the evaluation of demonstration proposals across three stages: The first stage represents a filtering stage to identify those proposals relevant for further considerations. The second stage comprises a multi-criteria scoring method drawing on an evaluation against nineteen criteria. The final third stage serves to critically review the need for public funding of well-scored proposals. This contribution outlines the development of the DSS and its design and thus provides insights on proposal evaluating in energy research.

Description: It is widely recognised that access to sustainable and affordable energy services is a crucial factor in reducing poverty and enhancing development. Accordingly, various positive effects beyond simple access to energy are associated with the implementation of sustainable energy projects. One of these assumed positive outcomes is the productive use of energy, which is expected to create value - for example in the form of increased local availability of goods or higher incomes - thereby having a positive impact on local livelihoods. Many projects and programmes are based on such expectations regarding the productive use of energy but systematic evidence of these outcomes and impacts is still limited. This study analyses the results of an impact evaluation of 30 small-scale energy development projects to better understand whether and how the supply of sustainable energy services supports productive use activities and whether these activities have the expected positive impacts on local livelihoods. A contribution analysis is applied to systematically evaluate the impact pathways for the productive use of energy. The results show that access to sustainable energy does not automatically result in productive activities and that energy is only one of the input factors required to foster socio-economic development. Furthermore, the results demonstrate that activities, materials and information to support the productive use of energy - such as training, equipment or market research - need to be an integrated part of the energy project itself to allow for productive activities to develop on a wider scale.

Description: The Port of Rotterdam is one of the pioneers in the reduction of greenhouse gas emissions. It is the largest port in Europe and extends over 40 kilometres to the North Sea coast. Its ambitious goal: the port wants to reduce greenhouse gas emissions from its industrial cluster as well as from freight traffic to a large extent. For the study "Deep Decarbonisation Pathways for Transport and Logistics Related to the Port of Rotterdam" the Wuppertal Institute analysed available options for the maritime as well was hinterland transports on behalf of the Rotterdam Port Authority. The 2050 scenarios by the Wuppertal Institute show that decarbonisation will significantly change both, volume and structure of the transported goods - which add to the on-going trend from bulk to container transport. This will have considerable structural effects on port operations and in particular on hinterland traffic. A comprehensive decarbonisation (〉95 per cent) will require significant efficiency improvements through operational and technical measures and the switch to non-fossil fuels, as well as a strong shift of container transport from road transport to rail and inland navigation. For maritime shipping to and from Rotterdam two feasible pathways towards full decarbonisation by 2050 are presented. Both include a stepwise shift towards renewable electricity based energy carriers for ships (liquids and gaseous for long distances and hydrogen and electricity for shorter distances). Finally the report derives a set of recommendations for the Port Authority as well as the Dutch, German and European policymakers to support the transition towards a drastic reduction of greenhouse gase (GHG) emissions from in the transport sector and for using this as a strategy for a sustainable economic development.

Description: This study focuses on smart grids and integration of renewable energy sources in Japan. It first elaborates on the current status of the Japanese power market, its electricity grid, and the trends taking place which result in the need for smart grids. It proceeds with strategic and legislative framework setting relevant for smart grids and renewables, and with current status of smart grids and renewables. Further, it focuses on relevant stakeholders, new business models, and public acceptance relevant for smart grids and renewables. It then puts the Japanese developments in international context and, where possible, compares it to Germany. Lastly, it derives recommendations and identifies where Japanese and German policymakers, regulators and private sector stakeholders might profit from closer collaboration.

Description: The EU has set itself ambitious targets with regards to a significant reduction of its greenhouse gas emissions and has presented roadmaps depicting an overall decarbonisation of its economy by the middle of the century. In this context European policymakers and stakeholders are currently discussing the targets and the level of ambition of the 2030 climate and energy policy framework. The Commission is expected to present its own vision for the further development of the energy and climate policy framework in its White Paper "For a 2030 climate and energy policy framework". At this decisive point in the political debate the Wuppertal Institute presents a brief working paper that analyses some of the analytical work - particularly the underlying energy and GHG emission scenarios - behind the Commission's proposals to be presented in the forthcoming White Paper.

Description: The main objective of AIRP-SD was to address the urgent need to stimulate innovation in Research, Technological development and Demonstration (RTD) processes in order to enhance the prospects of RTD contributing positively to processes and strategies leading to radical improvements in the sustainability of production-consumption systems. This Milestone One Report was the first of three status reports, summarising the interim findings of the first three work packages since the start of the project in January 2002.

Description: The bioeconomy is gaining growing attention as a perceived win-win strategy for environment and economy in the EU. However, the EU already has a disproportionately high global cropland footprint compared to the world average, and uses more cropland than domestically available to supply its demand for agricultural products. There is a risk that uncontrolled growth of the bioeconomy will increase land use pressures abroad. For that reason, a monitoring system is needed to account for the global land use of European consumption. The aim of this paper is to take a closer look at the tools needed to monitor global cropland footprints, as well as the targets needed to benchmark development. This paper reviews recent developments in land footprint accounting approaches and applies the method of global land use accounting to calculate the global cropland footprint of the EU-27 for the years between 2000 and 2011. It finds a slight decrease in per capita cropland footprints over the past decade (of around 1% annually, reaching 0.29 ha/cap in 2011) and advocates promoting a further decrease in per capita cropland requirements (of around 2% annually) to reach global land use targets for keeping consumption within the safe operating space of planetary boundaries by 2030. It argues that strategic land reduction targets may still go hand in hand with the growth of a smart, innovative and sustainable bioeconomy by reinforcing the need for policies that support greater efficiency across the life-cycle and reduce wasteful and excessive consumption practices. Recommendations for further improving land footprint accounting are given.

Description: The paper reflects the hypothesis that those technological and institutional innovations survive which extend the safe operating range (SOR) of the Humans-Technologies-Institutions (HTI) system (e.g. companies, cities, regions and countries). The multidimensional SOR of a country comprises in particular safe livelihood, quality of life, security, monetary stability, supply security and quality of the environment. A "mechanism of progress" is described involving the search for higher safety and independence of constraints. With innovation and learning in a key role, the mechanism leads to a relative decoupling of resource use and economic value added and a growing share of knowledge generation in the economy. Competition of HTI systems for scarce resources may lead to independence strategies such as enhanced resource efficiency. It may also lead to cooperation of competing HTI systems facilitated by new institutions thus forming an HTI system at higher level of complexity. While the consortium could coordinate their resource consumption within the boundaries of safe operating space, the partner HTI systems would further expand their SOR. Data is provided that net resource importing countries have developed higher material productivity thus increasing their independence from resource supply, and countries with such capability have gained higher innovation capacity.

Description: This paper sums up the recent developments in concepts and methods being used to measure the impacts of cities on environmental sustainability. It differentiates between a dominant trend in research literature that concentrates on the accounting and allocation of greenhouse gas (GHG) emissions and energy use to cities, and a re-emergence of studies focusing on the direct and indirect urban material and resource flows. The availability of reliable data and standard protocols is greater in the GHG accounting field and continues to grow rapidly.

Description: Small-scale residential biomass combustion for space heating and warm water production already holds a considerable share on overall energy production from biomass in Europe. In the existing regulative framework of EU air quality and climate protection targets, an extended usage of renewable biomass heating without an increase of harmful emissions is urgently needed. In this context, the FP7 project "EU-UltraLowDust" (ULD) aimed at the demonstration of highly efficient and ultra-low emission small-scale biomass combustion technologies and the development of supporting policy recommendations. New combustion technology operating at almost zero particulate matter (PM) emissions has been demonstrated, rivalling even the performance of state-of-the-art natural gas fuelled systems. In this context, the authors analysed EU policy options for a faster diffusion of these new innovative technologies. The analysis presented in this paper is based on results from an original impact assessment with special focus on energy efficiency and emission scenarios, including the potential effects of a broad deployment of the new ULD technologies as well as the early replacement of poor performing existing installations. As the derived results show that major shares of energy consumption and emissions from residential biomass combustion in the EU are caused by old heating systems, specific policy measures for new and existing installations have been analysed. Following this, a recommended and harmonized policy package for new Small Combustion Installations (SCI) to be put on the market as well as for existing SCI in the stock has been developed, which will be presented in this paper. The basic policy package addresses new installations and consists of a two-step approach, aiming at enhancing the current and forthcoming policies addressing the SCI market in Europe. A complementary second policy package for existing installations aims specifically at the early replacement of SCI already installed in the stock, which are characterized by low efficiency and high emissions.