ALBERT

Description: This contribution presents the state of the art of economy-wide material flow accounting. Starting from a brief recollection of the intellectual and policy history of this approach, we outline system definition, key methodological assumptions, and derived indicators. The next section makes an effort to establish data reliability and uncertainty for a number of existing multinational (European and global) material flow accounting (MFA) data compilations and discusses sources of inconsistencies and variations for some indicators and trends. The results show that the methodology has reached a certain maturity: Coefficients of variation between databases lie in the range of 10% to 20%, and correlations between databases across countries amount to an average R2 of 0.95. After discussing some of the research frontiers for further methodological development, we conclude that the material flow accounting framework and the data generated have reached a maturity that warrants material flow indicators to complement traditional economic and demographic information in providing a sound basis for discussing national and international policies for sustainable resource use.

Description: Fossil independence and substantial reductions in CO2 emissions seem to be possible with 2nd generation biofuels. New technologies allow a full carbon-to-fuel conversion of non-edible plant parts such as straw or wood, and the cultivation of algae or salt-resistant plants uncouples bioenergy from food production. Nevertheless, impacts on biodiversity, global land and water use are widely unclear and their competitiveness with 1st generation biofuels and electric mobility is an open question. An interdisciplinary team of Empa, University of Zurich and the Wuppertal Institute of Climate, Environment and Energy evaluated the most sustainable production techniques and assessed their potential for our future mobility.

Description: During the last century, the consumption of materials for human needs increased by several orders of magnitude, even for non-renewable materials such as metals. Some data on annual consumption (input) and recycling/waste (output) can often be found in the federal statistics, but a clear picture of the main flows is missing. A dynamic material flow model is developed for the example of copper in Switzerland in order to simulate the relevant copper flows and stocks over the last 150 years. The model is calibrated using data from statistical and published sources as well as from interviews and measurements. A simulation of the current state (2000) is compared with data from other studies. The results show that Swiss consumption and losses are both high, at a level of about 8 and 2 kg/(cap year), respectively, or about three times higher than the world average. The model gives an understanding of the flows and stocks and their interdependencies as a function of time. This is crucial for materials whose consumption dynamics are characterised by long lifetimes and hence for relating the current output to the input of the whole past. The model allows a comprehensive discussion of possible measures to reduce resource use and losses to the environment. While increasing the recycling reduces losses to landfill, only copper substitution can reduce the different losses to the environment, although with a time delay of the order of a lifetime.

Description: Iran as an energy-rich country faces many challenges in optimal utilization of its vast resources. High population and economic growth, generous subsidies program, and poor resource management have contributed to rapidly growing energy consumption and high energy intensity for the past decades. The continuing trend of energy consumption will bring about new challenges as it will shrink oil exports revenues restraining economic activities and lowering standard of living. This study intends to tackle some of the important challenges in the energy sector and to explore alternative scenarios for utilization of energy resources in Iran for the period 2005-2030. We use techo-economic or end-use approach along with econometric methods to model energy demand in Iran for different types (fuel, natural gas, electricity, and renewable energy) in all sectors of the economy (household, industry, transport, power plants, and others) and forecast it under three scenarios: Business As Usual (BAU), Efficiency, and Renewable Energy. This study is the first comprehensive study that models the Iranian energy demand using the data at different aggregation levels and a combination of methods to illuminate the future of energy demand under alternative scenarios. The results of the study have great policy implications as they indicate a huge potential for energy conservation and therefore additional revenues and emission reduction under the efficiency scenario compared with the base scenario. Specifically, the total final energy demand under the BAU scenario will grow on average by 2.6 percent per year reaching twice the level as that in 2005. In contrast, the total final energy demand in the Efficiency scenario will only grow by 0.4 percent on average per year. The average growth of energy demand under the combined Efficiency and Renewable Energy scenarios will be 0.2 percent per year. In the BAU scenario, energy intensity will be reduced by about 30 percent by 2030, but will still be above today's world average. In the Efficiency scenario, however, energy intensity will decline by about 60 percent by 2030 to a level lower than the world average today. The energy savings under the Efficiency and Renewable scenarios will generate significant additional revenues and will lead to 45 percent reduction in CO2-emissions by 2030 as compared to the BAU trends.

Description: Carbon capture and storage (CCS) might be an important climate protection technology for coal-rich countries. This paper presents first results of a systemic and long-term analysis of a future CCS implementation in India. It focuses on potential storage formations in the geological subsurface and the geographic match of these sinks with CO2 emissions of current and future largepoint power plants. The analysis is framed by an overview on India’s position on CCS, ongoing Indian research and development projects as well as its international activities. The geological potential for CO2 sequestration in India is subject to large uncertainty because, so far, only few studies estimated it in a vague manner. A first meta-analysis shows that there is a huge variation between 48 Gt and 572 Gt of CO2. The main differences between the evaluated studies are the assumed capacities for deep saline aquifers and basalt formations. Taking the ongoing discussion and the existing uncertainties into account, the storage potential might be provided only by aquifers (in the range of 44 to 360 Gt of CO2) and hydrocarbon fields (2 to 7 Gt of CO2). The amount of CO2 emissions possibly available for sequestration is assessed by applying three substantially different long-term energy scenarios for India. These scenarios, indicating pathways between a "low carbon" and a "high carbon" development until 2050, result in cumulated CO2 emissions between 30 and 171 Gt if all new large-scaled power plants will be based on CCS from 2020 on. Compared with the sink capacities, only the CO2 emissions of scenario S2 (30 Gt) could theoretically be stored with high certainty. Considering the scenarios S3 and S1, their CO2 emissions (94 Gt and 171 Gt, respectively) could only be sequestered if the aquifer capacity would prove to be usable. Geological storage sites do not appear to be located close to sources in South West, Central, North and North East India. This first rough analysis means that only those CO2 emissions occurring in the Western parts of North and West India, the Eastern part of South India as well as the South part of East India might be suited for sequestration nearby. A more detailed source-sink matching will follow in the next phase of the project, including results of expert meetings in India. Furthermore, this analysis will be complemented by an additional assessment from economic, ecological and resource-strategic points of view, which might further affect the potential for CCS.

Description: Biogas and bio-methane that are based on energy crops are renewable energy carriers and therefore potentially contribute to climate protection. However, significant greenhouse gas emissions resulting from agricultural production processes must be considered, mainly resulting from agricultural production processes, as fertilizer use, pesticide etc. This paper provides an integrated life cycle assessment (LCA) of biogas (i.e. bio-methane that has been upgraded and injected into the natural gas grid), taking into account the processes of fermentation, upgrading and injection to the grid for two different types of biogas plants thus examining the current state of the art as well as new, large-scale plants, operated by industrial players. Not only technical and engineering aspects are taken into account here, but also the choice of feedstock which plays an important role as to the overall ecological evaluation of bio-methane. The substrates evaluated in this paper - aside from maize - are rye, sorghum, whole-crop-silage from triticale and barley, and the innovative options of agricultural grass (Landsberger Gemenge, a mixture of hairy vetch (vicia villosa), crimson clover (trifolium incarnátum) and Italian ryegrass (lolium multiflorum)) as well as a combination of maize and sunflower.

Description: The North African countries Morocco, Algeria, Tunisia, Libya and Egypt have been and are currently experiencing rapid growth in energy demand. This development confronts their political leaders with the question of how to expand or diversify their countries' generation capacities. In this context, renewable energies and nuclear power constitute options that have rarely been exploited so far in the region. This article analyzes the drawbacks and benefits of both alternatives, with a special focus on import and export dynamics. When attempting to make the strategic decision between renewables and atomic power, North African regional specifics and circumstances have to be taken into account. Hence, in a first step, the article characterizes the energy systems of the North African countries and presents scenarios for their future development. In a second step, it scrutinizes the energy challenges these states face in terms of domestic concerns and foreign affairs. Finally, a case study of Algeria is used to demonstrate how renewable energies, but not nuclear power, are able to respond to North African energy challenges.

Description: This brochure summarises key findings on energy solutions for the preparation and processing of food using local and renewable energy resources. More data, examples and information are available on the internet platform: www.wisions.net

Description: The general conditions for local authorities in Germany have changed fundamentally during the last decades. Not only do municipalities compete with each other for employment, prestige and competitive advantages, they also face increasingly higher demands by their citizens, for instance in the area of climate protection. Therefore, every municipality has to consider various economic, social and ecological determinants in its decision-making processes. With respect to public buildings, an economically-oriented cost-benefit-analysis alone is not adequate due to a municipality's role as "consumer and role model". To identify measures with a broader benefit, a multicriteria analysis (MCA) has been used to analyze energy efficiency measures in public buildings for the city of Dortmund. For several years Dortmund has committed itself to implement energy efficiency measures and improve the energy performance of its building stock. Nevertheless, a benchmark analysis still shows a high energy saving potential that cannot be tapped with the existing measures and instruments. Therefore, a package of measures has been developed in close cooperation with the city of Dortmund, ranging broadly from measures of energetic retrofitting and green IT to behavioral change of building occupants. In the MCA these measures have been assessed according to ten different criteria such as innovativeness, cost effectiveness, external costs, CO2 reduction potential, local value or effort of implementation. Three different scenarios ("City as Role Model", "City as Homo Oeconomicus", "City as Climate Protector") show different municipal perspectives. The analysis has shown that the greatest benefit for municipalities, regardless of the municipal perspective, is yielded by measures such as voluntarily enhanced minimum standards for new or for energetic retrofitting of public buildings, the procurement of energy-efficient office equipment, the expansion of heat generation from renewable energies and the usage of private capital in participatory projects like "Solar&Save".

Description: CCS is discussed in a broad sense throughout Europe. In this paper a cautious, conservative estimate of CO2 storage capacity for Germany and its neighbouring countries where CO2 emissions from Germany could possibly be stored (Netherlands, France, Denmark, Norway, UK and Poland) is presented. Such a lower limit calculation is necessary for orientation purposes for potential investors and political decision-makers. Conservative CO2 sequestration capacity in deep saline aquifers for Germany is derived by the volumetric approach where parameters such as efficiency factor, CO2 density, porosity of the geological formation are of interest. It is assumed that every geological system is closed and thus an efficiency factor of 0.1 per cent (based on maximum pressure increase and total compressibility) for saline aquifers is applied. The capacity of German depleted oil and gas fields is based on cumulative recovery data and a sweep efficiency of 75 per cent. The storage capacity in the other considered countries, adjacent to Germany, are based on a critical review and adjustment of the results of the European reports JOULE II, GESTCO and GeoCapacity. The conservative capacities for all countries together amount to 49 Gt CO2, from which Norway and the UK provide 36 Gt, all offshore in the North Sea. Compared to the emissions from large point sources in these countries during 40 years (47.6 Gt of CO2), a virtual balance is achieved. This can only be reached, if a large scale CO2 pipeline system is installed to connect these countries, especially Germany, to the large sinks in the North Sea. If additional restrictions like source-sink matching, acceptance issues and injection rates constraints are taken into account, the available storage space gets increasingly scarce.

Description: This paper analyses drivers for resource use and material productivity acrosscountries. This is not only relevant in light of soaring raw material prices but also because EU policies, such as the "Thematic Strategy on the Sustainable Use of Natural Resources" (COM [2005] 670), the EU Raw Materials Initiative (COM [2008] 699) and various similar policies internationally, seek to better manage materials along their life-cycle and across economies. In order to better understand the system dynamics of material use, our paper applies methodologies of material flow analysis and regression analysis to identify the major drivers for resource use and decoupling from GDP. Drivers are understood as those factors that exert influence on human activities to use resources. A panel data set is taken for the European Union for the years 1980–2000 (EU-15) and 1992–2000 (EU-25). The main drivers of resource use were found to be energy efficiency, new dwellings and roads construction activities. Shortcomings of the methodology are also discussed.

Description: As illustrated by the case studies of end-of-life vehicles and waste electric and electronic equipment, the approach of an extended producer responsibility is undermined by the exports of used and waste products. This fact causes severe deficits regarding circular flows, especially of critical raw materials such as platinum group metals. With regard to global recycling there seems to be a responsibility gap which leads somehow to open ends of waste flows and a loss or down-cycling of potential secondary resources. Existing product-orientated extended producer responsibility (EPR) approaches with mass-based recycling quotas do not create adequate incentives to supply waste materials containing precious metals to a high-quality recycling and should be amended by aspects of a material stewardship. The paper analyses incentive effects on EPR for the mentioned product groups and metals, resulting from existing regulations in Germany. It develops a proposal for an international covenant on metal recycling as a policy instrument for a governance-oriented framework to initiate systemic innovations along the complete value chain taking into account product group- and resource group-specific aspects on different spatial levels. It aims at the effective implementation of a central idea of EPR, the transition of a waste regime still focusing on safe disposal towards a sustainable management of resources for the complete lifecycle of products.

Description: Concentrated solar power (CSP) plants are one of several renewable energy technologies with significant potential to meet a part of future energy demand. An integrated technology assessment shows that CSP plants could play a promising role in Africa and Europe, helping to reach ambitious climate protection goals. Based on the analysis of driving forces and barriers, at first three future envisaged technology scenarios are developed. Depending on the underlying assumptions, an installed capacity of 120 GWel, 405 GWel or even 1,000 GWel could be reached globally in 2050. In the latter case, CSP would then meet 13–15% of global electricity demand. Depending on these scenarios, cost reduction curves for North Africa and Europe are derived. The cost assessment conducted for two virtual sites in Algeria and in Spain shows a long-term reduction of electricity generating costs to figures between 4 and 6 ct/kWhel in 2050. The paper concludes with an ecological analysis based on life cycle assessment. Although the greenhouse gas emissions of current (solar only operated) CSP systems show a good performance (31 g CO2-equivalents/kWhel) compared with advanced fossil-fired systems (130–900 CO2-eq./kWhel), they could further be reduced to 18 g CO2-eq./kWhel in 2050, including transmission from North Africa to Europe.

Description: International consensus is growing that a transition towards a low carbon society (LCS) is needed over the next 40 years. The G8, the Major Economies Forum on Energy and Climate, as well as the Ad Hoc Working Group on Long-term Cooperative Action under the United Nations Framework Convention on Climate Change, have concluded that states should prepare their own Low-emission Plans or Low-emission Development Plans and such plans are in development in an increasing number of countries. An analysis of recent long-term low emission scenarios for Germany shows that all scenarios rely heavily on a massive scale up of energy efficiency improvements based on past trends. However, in spite of the high potential that scenario developers assign to this strategy, huge uncertainty still exists in respect of where the efficiency potentials really lie, how and if they can be achieved and how much their successful implementation depends on more fundamental changes towards a more sustainable society (e.g. behavioural changes). In order to come to a better understanding of this issue we specifically examine the potential for energy efficiency in relation to particular demand sectors. Our comparative analysis shows that despite general agreement about the high importance of energy efficiency (EE), the perception on where and how to achieve it differ between the analysed scenarios. It also shows that the close nexus between energy efficiency and non-technical behavioural aspects is still little understood. This leads us to the conclusion that in order to support energy policy decisions more research should be done on energy efficiency potential. A better understanding of its potential would help energy efficiency to fulfil its role in the transition towards a LCS.

Description: Technical innovations can contribute significantly to increase resource efficiency. A selection of 21 examples for resource efficient technologies, products and strategies from the field shows the brochure Resource Efficiency Atlas, which was created in line with the same titled project. Overall the project team analysed several hundred technical solutions and strategies and assessed its possible contributions to increases in resource efficiency. The project was arranged co-operatively by the Fraunhofer Institute for Industrial Engineering IAO, the Trifolium-Beratungsgesellschaft mbH and the Institut für Arbeitswissenschaften und Technologiemanagement of the University Stuttgart. The examples from the brochure and further 70 examples can be seen on the project website www.ressourceneffizenzatlas.de.