ALBERT

Description: This contribution presents the state of the art of economy-wide material flow accounting. Starting from a brief recollection of the intellectual and policy history of this approach, we outline system definition, key methodological assumptions, and derived indicators. The next section makes an effort to establish data reliability and uncertainty for a number of existing multinational (European and global) material flow accounting (MFA) data compilations and discusses sources of inconsistencies and variations for some indicators and trends. The results show that the methodology has reached a certain maturity: Coefficients of variation between databases lie in the range of 10% to 20%, and correlations between databases across countries amount to an average R2 of 0.95. After discussing some of the research frontiers for further methodological development, we conclude that the material flow accounting framework and the data generated have reached a maturity that warrants material flow indicators to complement traditional economic and demographic information in providing a sound basis for discussing national and international policies for sustainable resource use.

Description: This study provides insight into the feasibility of a CO2 trunkline from the Netherlands to the Utsira formation in the Norwegian part of the North Sea, which is a large geological storage reservoir for CO2. The feasibility is investigated in competition with CO2 storage in onshore and near-offshore sinks in the Netherlands. Least-cost modelling with a MARKAL model in combination with ArcGIS was used to assess the cost-effectiveness of the trunkline as part of aDutch greenhouse gas emission reduction strategy for the Dutch electricity sector and CO2 intensive industry. The results show that under the condition that a CO2 permit price increases from €25 per tCO2 in 2010 to €60 per tCO2 in 2030, and remains at this level up to 2050, CO2 emissions in the Netherlands could reduce with 67% in 2050 compared to 1990, and investment in the Utsira trunkline may be cost-effective from 2020–2030 provided that Belgian and German CO2 is transported and stored via the Netherlands as well. In this case, by 2050 more than 2.1 GtCO2 would have been transported from the Netherlands to the Utsira formation. However, if the Utsira trunkline is not used for transportation of CO2 from Belgium and Germany, it may become cost-effective 10 years later, and less than 1.3 GtCO2 from the Netherlands would have been stored in the Utsiraformation by 2050. On the short term, CO2 storage in Dutch fields appears more cost-effective than in the Utsira formation, but as yet there are major uncertainties related to the timing and effective exploitation of the Dutch offshore storage opportunities.

Description: Life Cycle Assessment (LCA) has matured over the past decades and become part of the broader field of sustainability assessment. To strengthen LCA as a tool and eventually increase its usefulness for sustainability decision-making, it is argued that there is a need to expand the ISO LCA framework by integration and connection with other concepts and methods. This paper explores the potential options for deepening and broadening the LCA methodologies beyond the current ISO framework for improved sustainability analysis. By investigating several environmental, economic and social assessment methods, the paper suggests some options for incorporating (parts of) other methods or combining with other methods for broadening and deepening the LCA.

Description: This study aims to stimulate the discussion on how to optimize a sustainable energy mix from an environmental perspective and how to apply existing renewable energy sources in the most efficient way. Ground-mounted photovoltaics (PV) and the maize-biogas-electricity route are compared with regard to their potential to mitigate environmental pressure, assuming that a given agricultural area is available for energy production. Existing life cycle assessment (LCA) studies are taken as abasis to analyse environmental impacts of those technologies in relation to conventional technology for power and heat generation. The life-cycle-wide mitigation potential per area used is calculated for the impact categories non-renewable energy input, green house gas (GHG) emissions, acidification and eutrophication. The environmental performance of each system depends on the scenario that is assumed for end energy use (electricity and heat supply have been contemplated). In all scenarios under consideration, PV turns out to be superior to biogas in almost all studied impact categories. Even when maize is used for electricity production in connection with very efficient heat usage, and reduced PV performance is assumed to account for intermittence, PV can still mitigate about four times the amount of green house gas emissions and non-renewable energy input compared to maize-biogas. Soil erosion, which can be entirely avoided with PV, exceeds soil renewal rates roughly 20-fold on maize fields. Regarding the overall Eco-indicator 99 (H) score under most favourable assumptions for the maize–biogas route, PV has still a more than 100% higher potential to mitigate environmental burden. At present, the key advantages of biogas are its price and its availability without intermittence. In the long run, and with respect to more efficient land use, biogas might preferably be produced from organic waste or manure, whereas PV should be integrated into buildings and infrastructures.

Description: For parabolic trough power plants using synthetic oil as the heat transfer medium, the application of solid media sensible heat storage is an attractive option in terms of investment and maintenance costs. One important aspect in storage development is the storage integration into the power plant. A modular operation concept for thermal storage systems was previously suggested by DLR, showing an increase in storage capacity of more than 100 %. However, in these investigations, the additional costs needed to implement this storage concept into the power plant, like for extra piping, valves, pumps and control had not been considered. These aspects are discussed in this paper, showing a decrease of levelized energy costs with modular storage integration of 2 to 3 %. In a Life Cycle Assessment (LCA) a comparison of an AndaSol-I type solar thermal power plant [1] with the original two-tank molten salt storage and with a "hypothetical" concrete storage shows an advantage of the concrete storage technology concerning environmental impacts. The environmental impacts of the “hypothetical” concrete based AndaSol-I decrease by 7 %, considering 1 kWh of solar electricity delivered to the grid. Regarding only the production of the power plant, the emissions decrease by 9.5 %.

Description: Fossil independence and substantial reductions in CO2 emissions seem to be possible with 2nd generation biofuels. New technologies allow a full carbon-to-fuel conversion of non-edible plant parts such as straw or wood, and the cultivation of algae or salt-resistant plants uncouples bioenergy from food production. Nevertheless, impacts on biodiversity, global land and water use are widely unclear and their competitiveness with 1st generation biofuels and electric mobility is an open question. An interdisciplinary team of Empa, University of Zurich and the Wuppertal Institute of Climate, Environment and Energy evaluated the most sustainable production techniques and assessed their potential for our future mobility.

Description: New technologies can be the basis for resource-efficient products and services and thus create eco-innovations, either by creating new functionalities in existing or new application fields or by substituting existing technologies in existing or new application fields. In this paper, an overview over different technology fields, products and strategies with resource efficiency potential, such as nanotechnolo- gies, material science, manufacturing technologies, process technologies and cross-cutting issues, is presented. There is a special focus on applications from nanotechnology issuing, e.g. functional surfaces or new "smart" materials with special functionalities. Furthermore, it is shown how companies can use the method Resource Efficiency Technology Radar to identify and evaluate technolo- gies with resource efficiency in order to incorporate them into their development activities.

Description: During the last century, the consumption of materials for human needs increased by several orders of magnitude, even for non-renewable materials such as metals. Some data on annual consumption (input) and recycling/waste (output) can often be found in the federal statistics, but a clear picture of the main flows is missing. A dynamic material flow model is developed for the example of copper in Switzerland in order to simulate the relevant copper flows and stocks over the last 150 years. The model is calibrated using data from statistical and published sources as well as from interviews and measurements. A simulation of the current state (2000) is compared with data from other studies. The results show that Swiss consumption and losses are both high, at a level of about 8 and 2 kg/(cap year), respectively, or about three times higher than the world average. The model gives an understanding of the flows and stocks and their interdependencies as a function of time. This is crucial for materials whose consumption dynamics are characterised by long lifetimes and hence for relating the current output to the input of the whole past. The model allows a comprehensive discussion of possible measures to reduce resource use and losses to the environment. While increasing the recycling reduces losses to landfill, only copper substitution can reduce the different losses to the environment, although with a time delay of the order of a lifetime.

Description: Overviewing the European carbon (C), greenhouse gas (GHG), and non-GHG fluxes, gross primary productivity (GPP) is about 9.3 Pg yr-1, and fossil fuel imports are 1.6 Pg yr-1. GPP is about 1.25% of solar radiation, containing about 360 × 1018 J energy - five times the energy content of annual fossil fuel use. Net primary production (NPP) is 50%, terrestrial net biome productivity, NBP, 3%, and the net GHG balance, NGB, 0.3% of GPP. Human harvest uses 20% of NPP or 10% of GPP, or alternatively 1‰ of solar radiation after accounting for the inherent cost of agriculture and forestry, for production of pesticides and fertilizer, the return of organic fertilizer, and for the C equivalent cost of GHG emissions. C equivalents are defined on a global warming potential with a 100-year time horizon. The equivalent of about 2.4% of the mineral fertilizer input is emitted as N2O. Agricultural emissions to the atmosphere are about 40% of total methane, 60% of total NO-N, 70% of total N2O-N, and 95% of total NH3-N emissions of Europe. European soils are a net C sink (114 Tg yr−1), but considering the emissions of GHGs, soils are a source of about 26 Tg CO2 C-equivalent yr-1. Forest, grassland and sediment C sinks are offset by GHG emissions from croplands, peatlands and inland waters. Non-GHGs (NH3, NOx) interact significantly with the GHG and the C cycle through ammonium nitrate aerosols and dry deposition. Wet deposition of nitrogen (N) supports about 50% of forest timber growth. Land use change is regionally important. The absolute flux values total about 50 Tg C yr-1. Nevertheless, for the European trace-gas balance, land-use intensity is more important than land-use change. This study shows that emissions of GHGs and non-GHGs significantly distort the C cycle and eliminate apparent C sinks.

Description: Iran as an energy-rich country faces many challenges in optimal utilization of its vast resources. High population and economic growth, generous subsidies program, and poor resource management have contributed to rapidly growing energy consumption and high energy intensity for the past decades. The continuing trend of energy consumption will bring about new challenges as it will shrink oil exports revenues restraining economic activities and lowering standard of living. This study intends to tackle some of the important challenges in the energy sector and to explore alternative scenarios for utilization of energy resources in Iran for the period 2005-2030. We use techo-economic or end-use approach along with econometric methods to model energy demand in Iran for different types (fuel, natural gas, electricity, and renewable energy) in all sectors of the economy (household, industry, transport, power plants, and others) and forecast it under three scenarios: Business As Usual (BAU), Efficiency, and Renewable Energy. This study is the first comprehensive study that models the Iranian energy demand using the data at different aggregation levels and a combination of methods to illuminate the future of energy demand under alternative scenarios. The results of the study have great policy implications as they indicate a huge potential for energy conservation and therefore additional revenues and emission reduction under the efficiency scenario compared with the base scenario. Specifically, the total final energy demand under the BAU scenario will grow on average by 2.6 percent per year reaching twice the level as that in 2005. In contrast, the total final energy demand in the Efficiency scenario will only grow by 0.4 percent on average per year. The average growth of energy demand under the combined Efficiency and Renewable Energy scenarios will be 0.2 percent per year. In the BAU scenario, energy intensity will be reduced by about 30 percent by 2030, but will still be above today's world average. In the Efficiency scenario, however, energy intensity will decline by about 60 percent by 2030 to a level lower than the world average today. The energy savings under the Efficiency and Renewable scenarios will generate significant additional revenues and will lead to 45 percent reduction in CO2-emissions by 2030 as compared to the BAU trends.

Description: Carbon capture and storage (CCS) might be an important climate protection technology for coal-rich countries. This paper presents first results of a systemic and long-term analysis of a future CCS implementation in India. It focuses on potential storage formations in the geological subsurface and the geographic match of these sinks with CO2 emissions of current and future largepoint power plants. The analysis is framed by an overview on India’s position on CCS, ongoing Indian research and development projects as well as its international activities. The geological potential for CO2 sequestration in India is subject to large uncertainty because, so far, only few studies estimated it in a vague manner. A first meta-analysis shows that there is a huge variation between 48 Gt and 572 Gt of CO2. The main differences between the evaluated studies are the assumed capacities for deep saline aquifers and basalt formations. Taking the ongoing discussion and the existing uncertainties into account, the storage potential might be provided only by aquifers (in the range of 44 to 360 Gt of CO2) and hydrocarbon fields (2 to 7 Gt of CO2). The amount of CO2 emissions possibly available for sequestration is assessed by applying three substantially different long-term energy scenarios for India. These scenarios, indicating pathways between a "low carbon" and a "high carbon" development until 2050, result in cumulated CO2 emissions between 30 and 171 Gt if all new large-scaled power plants will be based on CCS from 2020 on. Compared with the sink capacities, only the CO2 emissions of scenario S2 (30 Gt) could theoretically be stored with high certainty. Considering the scenarios S3 and S1, their CO2 emissions (94 Gt and 171 Gt, respectively) could only be sequestered if the aquifer capacity would prove to be usable. Geological storage sites do not appear to be located close to sources in South West, Central, North and North East India. This first rough analysis means that only those CO2 emissions occurring in the Western parts of North and West India, the Eastern part of South India as well as the South part of East India might be suited for sequestration nearby. A more detailed source-sink matching will follow in the next phase of the project, including results of expert meetings in India. Furthermore, this analysis will be complemented by an additional assessment from economic, ecological and resource-strategic points of view, which might further affect the potential for CCS.

Description: Biogas and bio-methane that are based on energy crops are renewable energy carriers and therefore potentially contribute to climate protection. However, significant greenhouse gas emissions resulting from agricultural production processes must be considered, mainly resulting from agricultural production processes, as fertilizer use, pesticide etc. This paper provides an integrated life cycle assessment (LCA) of biogas (i.e. bio-methane that has been upgraded and injected into the natural gas grid), taking into account the processes of fermentation, upgrading and injection to the grid for two different types of biogas plants thus examining the current state of the art as well as new, large-scale plants, operated by industrial players. Not only technical and engineering aspects are taken into account here, but also the choice of feedstock which plays an important role as to the overall ecological evaluation of bio-methane. The substrates evaluated in this paper - aside from maize - are rye, sorghum, whole-crop-silage from triticale and barley, and the innovative options of agricultural grass (Landsberger Gemenge, a mixture of hairy vetch (vicia villosa), crimson clover (trifolium incarnátum) and Italian ryegrass (lolium multiflorum)) as well as a combination of maize and sunflower.

Description: The North African countries Morocco, Algeria, Tunisia, Libya and Egypt have been and are currently experiencing rapid growth in energy demand. This development confronts their political leaders with the question of how to expand or diversify their countries' generation capacities. In this context, renewable energies and nuclear power constitute options that have rarely been exploited so far in the region. This article analyzes the drawbacks and benefits of both alternatives, with a special focus on import and export dynamics. When attempting to make the strategic decision between renewables and atomic power, North African regional specifics and circumstances have to be taken into account. Hence, in a first step, the article characterizes the energy systems of the North African countries and presents scenarios for their future development. In a second step, it scrutinizes the energy challenges these states face in terms of domestic concerns and foreign affairs. Finally, a case study of Algeria is used to demonstrate how renewable energies, but not nuclear power, are able to respond to North African energy challenges.

Description: The importance of intact ecosystems for human-wellbeing as well as the dependence on functions and services they provide is undoubted. But still neither the costs of ecosystem degradation nor the benefits from ecosystem functions and services appear on socio-economic balance sheets when development takes place. Consequently overuse of natural resources is socio-economically promoted by conventional resource management policies and external effects (externalities), equally positives and negatives, remain unregarded. In this context the potential of payments for hydrological ecosystem services as a political instrument to foster sustainable natural resource use, and rural development shall be investigated. This paper introduces the principle concept of such payments, presents a case study from Nicaragua and highlights preliminary effects of the application of this instrument on natural resource use and development.

Description: This brochure summarises key findings on energy solutions for the preparation and processing of food using local and renewable energy resources. More data, examples and information are available on the internet platform: www.wisions.net

Description: The general conditions for local authorities in Germany have changed fundamentally during the last decades. Not only do municipalities compete with each other for employment, prestige and competitive advantages, they also face increasingly higher demands by their citizens, for instance in the area of climate protection. Therefore, every municipality has to consider various economic, social and ecological determinants in its decision-making processes. With respect to public buildings, an economically-oriented cost-benefit-analysis alone is not adequate due to a municipality's role as "consumer and role model". To identify measures with a broader benefit, a multicriteria analysis (MCA) has been used to analyze energy efficiency measures in public buildings for the city of Dortmund. For several years Dortmund has committed itself to implement energy efficiency measures and improve the energy performance of its building stock. Nevertheless, a benchmark analysis still shows a high energy saving potential that cannot be tapped with the existing measures and instruments. Therefore, a package of measures has been developed in close cooperation with the city of Dortmund, ranging broadly from measures of energetic retrofitting and green IT to behavioral change of building occupants. In the MCA these measures have been assessed according to ten different criteria such as innovativeness, cost effectiveness, external costs, CO2 reduction potential, local value or effort of implementation. Three different scenarios ("City as Role Model", "City as Homo Oeconomicus", "City as Climate Protector") show different municipal perspectives. The analysis has shown that the greatest benefit for municipalities, regardless of the municipal perspective, is yielded by measures such as voluntarily enhanced minimum standards for new or for energetic retrofitting of public buildings, the procurement of energy-efficient office equipment, the expansion of heat generation from renewable energies and the usage of private capital in participatory projects like "Solar&Save".

Description: CCS is discussed in a broad sense throughout Europe. In this paper a cautious, conservative estimate of CO2 storage capacity for Germany and its neighbouring countries where CO2 emissions from Germany could possibly be stored (Netherlands, France, Denmark, Norway, UK and Poland) is presented. Such a lower limit calculation is necessary for orientation purposes for potential investors and political decision-makers. Conservative CO2 sequestration capacity in deep saline aquifers for Germany is derived by the volumetric approach where parameters such as efficiency factor, CO2 density, porosity of the geological formation are of interest. It is assumed that every geological system is closed and thus an efficiency factor of 0.1 per cent (based on maximum pressure increase and total compressibility) for saline aquifers is applied. The capacity of German depleted oil and gas fields is based on cumulative recovery data and a sweep efficiency of 75 per cent. The storage capacity in the other considered countries, adjacent to Germany, are based on a critical review and adjustment of the results of the European reports JOULE II, GESTCO and GeoCapacity. The conservative capacities for all countries together amount to 49 Gt CO2, from which Norway and the UK provide 36 Gt, all offshore in the North Sea. Compared to the emissions from large point sources in these countries during 40 years (47.6 Gt of CO2), a virtual balance is achieved. This can only be reached, if a large scale CO2 pipeline system is installed to connect these countries, especially Germany, to the large sinks in the North Sea. If additional restrictions like source-sink matching, acceptance issues and injection rates constraints are taken into account, the available storage space gets increasingly scarce.

Description: This paper analyses drivers for resource use and material productivity acrosscountries. This is not only relevant in light of soaring raw material prices but also because EU policies, such as the "Thematic Strategy on the Sustainable Use of Natural Resources" (COM [2005] 670), the EU Raw Materials Initiative (COM [2008] 699) and various similar policies internationally, seek to better manage materials along their life-cycle and across economies. In order to better understand the system dynamics of material use, our paper applies methodologies of material flow analysis and regression analysis to identify the major drivers for resource use and decoupling from GDP. Drivers are understood as those factors that exert influence on human activities to use resources. A panel data set is taken for the European Union for the years 1980–2000 (EU-15) and 1992–2000 (EU-25). The main drivers of resource use were found to be energy efficiency, new dwellings and roads construction activities. Shortcomings of the methodology are also discussed.

Description: As illustrated by the case studies of end-of-life vehicles and waste electric and electronic equipment, the approach of an extended producer responsibility is undermined by the exports of used and waste products. This fact causes severe deficits regarding circular flows, especially of critical raw materials such as platinum group metals. With regard to global recycling there seems to be a responsibility gap which leads somehow to open ends of waste flows and a loss or down-cycling of potential secondary resources. Existing product-orientated extended producer responsibility (EPR) approaches with mass-based recycling quotas do not create adequate incentives to supply waste materials containing precious metals to a high-quality recycling and should be amended by aspects of a material stewardship. The paper analyses incentive effects on EPR for the mentioned product groups and metals, resulting from existing regulations in Germany. It develops a proposal for an international covenant on metal recycling as a policy instrument for a governance-oriented framework to initiate systemic innovations along the complete value chain taking into account product group- and resource group-specific aspects on different spatial levels. It aims at the effective implementation of a central idea of EPR, the transition of a waste regime still focusing on safe disposal towards a sustainable management of resources for the complete lifecycle of products.

Description: Several energy scenario studies consider concentrated solar power (CSP) plants as an important technology option to reduce the world's CO2 emissions to a level required for not letting the global average temperature exceed a threshold of 2–2.4 °C. A global ramp up of CSP technologies offers great economic opportunities for technology providers as CSP technologies include highly specialised components. This paper analyses possible value creation effects resulting from a global deployment of CSP until 2050 as projected in scenarios of the International Energy Agency (IEA) and Greenpeace International. The analysis focuses on the economic opportunities of German technology providers since companies such as Schott Solar, Flabeg or Solar Millennium are among the leading suppliers of CSP technologies on the global market.

Description: Concentrated solar power (CSP) plants are one of several renewable energy technologies with significant potential to meet a part of future energy demand. An integrated technology assessment shows that CSP plants could play a promising role in Africa and Europe, helping to reach ambitious climate protection goals. Based on the analysis of driving forces and barriers, at first three future envisaged technology scenarios are developed. Depending on the underlying assumptions, an installed capacity of 120 GWel, 405 GWel or even 1,000 GWel could be reached globally in 2050. In the latter case, CSP would then meet 13–15% of global electricity demand. Depending on these scenarios, cost reduction curves for North Africa and Europe are derived. The cost assessment conducted for two virtual sites in Algeria and in Spain shows a long-term reduction of electricity generating costs to figures between 4 and 6 ct/kWhel in 2050. The paper concludes with an ecological analysis based on life cycle assessment. Although the greenhouse gas emissions of current (solar only operated) CSP systems show a good performance (31 g CO2-equivalents/kWhel) compared with advanced fossil-fired systems (130–900 CO2-eq./kWhel), they could further be reduced to 18 g CO2-eq./kWhel in 2050, including transmission from North Africa to Europe.

Description: The physical dimension of international trade is attaining increased importance. This article describes a method to calculate complete physical trade flows for all countries which report their trade to the UN. The method is based on the UN Comtrade database and it was used to calculate world-wide physical trade flows for all reporting countries in nine selected years between 1962 and 2005. The results show increasing global trade with global direct material trade flows reaching about 10 billion tonnes in 2005, corresponding to a physical trade volume of about 20 billion tonnes (adding both total imports and total exports). The share from European countries is declining, mainly in favour of Asian countries. The dominant traded commodity in physical units was fossil fuels, mainly oil. Physical trade balances were used to identify the dominant resource suppliers and demanders. Australia was the principal resource supplier over the period with a diverse material export structure. It was followed by mainly oil-exporting countries with varying volumes. As regards to regions, Latin America, south-east Asian islands and central Asia were big resource exporters, mostly with increasing absolute amounts of net exports. The largest net importers were Japan, the United States and single European countries. Emerging countries like the "Asian Tigers" with major industrial productive sectors are growing net importers, some of them to an even higher degree than European countries. Altogether, with the major exception of Australia and Canada, industrialized countries are net importers and developing countries and transition countries are net exporters, but there are important differences within these groups.

Description: Securing universal access to electricity by using renewable energy sources is technically feasible. A broad range of technological options, which can meet almost any requirements, are available. Solutions can comprise the connection of users to large distribution networks (on-grid solutions) or the application of power supply systems that can operate autonomously (off-grid and mini-grid solutions). This brochure concentrates on the latter solutions; technologies for large-scale distribution are not covered.

Description: Biogas and bio-methane that are based on energy crops are renewable energy carriers and therefore potentially contribute to climate protection. However, significant greenhouse gas (GHG) emissions resulting from agricultural production processes must be considered. Among those, the production and use of fertilizer, and the resulting leaching of nitrous oxide (N2O), are crucial factors. This article provides an integrated life cycle assessment (LCA) of biogas (i.e. bio-methane that has been upgraded and injected into the natural gas grid), taking into account the processes of fermentation, upgrading and injection to the grid for two different types of biogas plants. The analysis is based on different feedstocks from crop rotation systems for different locations in Germany. A special focus is on the sensitivity of assumptions of nitrous oxide emissions to overall GHG emissions. Much research exists on the measurement or modeling of the actual N2O emissions that result from farming processes. Since there is as yet no precise regional data, most analyses use tier-1 data from the IPCC national GHG inventories as a default. The present article coincides with recent research in indicating that this data varies at the regional level. However, it is not the scope of the article to evaluate the quality of existing data for N2O emissions, but to show the effects of different assumptions on the LCA of GHGs from bio-methane. Thus, a link between the provision of emission data and the practical implementation of biogas technology is provided. The main result is that the supply chain of substrates from agricultural processes appears to contribute the most to the GHG emissions of bio-methane. The "worst case" scenario where 5% of the nitrogen fertilizer used is emitted in form of N2O shows that the GHG mitigation potential of bio-methane versus natural gas is very small, so there is not much margin for error in the plant technology.

Description: International consensus is growing that a transition towards a low carbon society (LCS) is needed over the next 40 years. The G8, the Major Economies Forum on Energy and Climate, as well as the Ad Hoc Working Group on Long-term Cooperative Action under the United Nations Framework Convention on Climate Change, have concluded that states should prepare their own Low-emission Plans or Low-emission Development Plans and such plans are in development in an increasing number of countries. An analysis of recent long-term low emission scenarios for Germany shows that all scenarios rely heavily on a massive scale up of energy efficiency improvements based on past trends. However, in spite of the high potential that scenario developers assign to this strategy, huge uncertainty still exists in respect of where the efficiency potentials really lie, how and if they can be achieved and how much their successful implementation depends on more fundamental changes towards a more sustainable society (e.g. behavioural changes). In order to come to a better understanding of this issue we specifically examine the potential for energy efficiency in relation to particular demand sectors. Our comparative analysis shows that despite general agreement about the high importance of energy efficiency (EE), the perception on where and how to achieve it differ between the analysed scenarios. It also shows that the close nexus between energy efficiency and non-technical behavioural aspects is still little understood. This leads us to the conclusion that in order to support energy policy decisions more research should be done on energy efficiency potential. A better understanding of its potential would help energy efficiency to fulfil its role in the transition towards a LCS.

Description: Technical innovations can contribute significantly to increase resource efficiency. A selection of 21 examples for resource efficient technologies, products and strategies from the field shows the brochure Resource Efficiency Atlas, which was created in line with the same titled project. Overall the project team analysed several hundred technical solutions and strategies and assessed its possible contributions to increases in resource efficiency. The project was arranged co-operatively by the Fraunhofer Institute for Industrial Engineering IAO, the Trifolium-Beratungsgesellschaft mbH and the Institut für Arbeitswissenschaften und Technologiemanagement of the University Stuttgart. The examples from the brochure and further 70 examples can be seen on the project website www.ressourceneffizenzatlas.de.

Description: It is now widely recognized that effective communication and demand-side policies for alternative energy require sound knowledge of preferences and determinants of demand of the public and consumers. To date, public attitudes towards new transport technologies have been studied under very different conceptual frameworks. This paper gives an overview of the various conceptual frameworks and methodologies used, where four main approaches can be distinguished: general attitudinal surveys, risk perception studies, non-market economic valuation studies, and other approaches such as those based on semiotic theory. We then review the findings of the recent literature on acceptance, attitudes and preferences for hydrogen and fuelcell end-use technologies, focusing on vehicles. These studies are then contrasted with related research into alternative fuel vehicles. The paper finally discusses the main trends in research and avenues for further work in this field. We recommend, among other things, the use of approaches that build knowledge and familiarity with the technology prior to the exploration of attitudes, and the set up of studies that take a whole-systems perspective of hydrogen technologies and that look at hydrogen in the context of other competing clean technologies.