ALBERT

Description: Flooding is a vast problem in many parts of the world, including Europe. It occurs mainly due to extreme weather conditions (e.g. heavy rainfall and snowmelt) and the consequences of flood events can be devastating. Flood risk is mainly defined as a combination of the probability of an event and its potential adverse impacts. Therefore, it covers three major dynamic components: hazard (physical characteristics of a flood event), exposure (people and their physical environment that being exposed to flood), and vulnerability (the elements at risk). Floods are natural phenomena and cannot be fully prevented. However, their risk can be managed and mitigated. For a sound flood risk management and mitigation, a proper risk assessment is needed. First of all, this is attained by a clear understanding of the flood risk dynamics. For instance, human activity may contribute to an increase in flood risk. Anthropogenic climate change causes higher intensity of rainfall and sea level rise and therefore an increase in scale and frequency of the flood events. On the other hand, inappropriate management of risk and structural protection measures may not be very effective for risk reduction. Additionally, due to the growth of number of assets and people within the flood-prone areas, risk increases. To address these issues, the first objective of this thesis is to perform a sensitivity analysis to understand the impacts of changes in each flood risk component on overall risk and further their mutual interactions. A multitude of changes along the risk chain are simulated by regional flood model (RFM) where all processes from atmosphere through catchment and river system to damage mechanisms are taken into consideration. The impacts of changes in risk components are explored by plausible change scenarios for the mesoscale Mulde catchment (sub-basin of the Elbe) in Germany. A proper risk assessment is ensured by the reasonable representation of the real-world flood event. Traditionally, flood risk is assessed by assuming homogeneous return periods of flood peaks throughout the considered catchment. However, in reality, flood events are spatially heterogeneous and therefore traditional assumption misestimates flood risk especially for large regions. In this thesis, two different studies investigate the importance of spatial dependence in large scale flood risk assessment for different spatial scales. In the first one, the “real” spatial dependence of return period of flood damages is represented by continuous risk modelling approach where spatially coherent patterns of hydrological and meteorological controls (i.e. soil moisture and weather patterns) are included. Further the risk estimations under this modelled dependence assumption are compared with two other assumptions on the spatial dependence of return periods of flood damages: complete dependence (homogeneous return periods) and independence (randomly generated heterogeneous return periods) for the Elbe catchment in Germany. The second study represents the “real” spatial dependence by multivariate dependence models. Similar to the first study, the three different assumptions on the spatial dependence of return periods of flood damages are compared, but at national (United Kingdom and Germany) and continental (Europe) scales. Furthermore, the impacts of the different models, tail dependence, and the structural flood protection level on the flood risk under different spatial dependence assumptions are investigated. The outcomes of the sensitivity analysis framework suggest that flood risk can vary dramatically as a result of possible change scenarios. The risk components that have not received much attention (e.g. changes in dike systems and in vulnerability) may mask the influence of climate change that is often investigated component. The results of the spatial dependence research in this thesis further show that the damage under the false assumption of complete dependence is 100 % larger than the damage under the modelled dependence assumption, for the events with return periods greater than approximately 200 years in the Elbe catchment. The complete dependence assumption overestimates the 200-year flood damage, a benchmark indicator for the insurance industry, by 139 %, 188 % and 246 % for the UK, Germany and Europe, respectively. The misestimation of risk under different assumptions can vary from upstream to downstream of the catchment. Besides, tail dependence in the model and flood protection level in the catchments can affect the risk estimation and the differences between different spatial dependence assumptions. In conclusion, the broader consideration of the risk components, which possibly affect the flood risk in a comprehensive way, and the consideration of the spatial dependence of flood return periods are strongly recommended for a better understanding of flood risk and consequently for a sound flood risk management and mitigation.

Description: Hochwasser sind ein großes Problem und treten hauptsächlich aufgrund extremer Wetterbedingungen (z. B. starker Regen und Schneeschmelze) auf. Die Folgen von Hochwasserereignissen können verheerend sein. Das Konzept des Hochwasserrisikos beinhaltet die drei Komponenten: Gefahr, Exposition und Vulnerabilität. Hochwasser sind natürliche Phänomene und können nicht sicher verhindert werden. Das Risiko kann jedoch gesteuert und gemindert werden. Für ein solides Hochwasserrisikomanagement und die Minderung des Risikos ist eine ordnungsgemäße Risikobewertung und ein klares Verständnis der Hochwasserrisikodynamik erforderlich. Beispielsweise verursacht der anthropogene Klimawandel eine höhere Intensität der Niederschläge und einen Anstieg des Meeresspiegels und damit eine Zunahme des Ausmaßes und der Häufigkeit von Hochwasserereignissen. Andererseits können unangemessene strukturelle Schutzmaßnahmen, das Anwachsen von Vermögenswerten und eine steigende Anzahl betroffener Personen in den hochwassergefährdeten Gebieten das Risiko erhöhen. Um diese Probleme zu adressieren, besteht ein Ziel dieser Arbeit aus der Durchführung einer Sensitivitätsanalyse, um die Auswirkungen von Änderungen in jeder Hochwasserrisikokomponente auf das Gesamtrisiko und deren Wechselwirkungen untereinander zu verstehen. Eine angemessene Risikobewertung wird auch durch die korrekte k Darstellung des realen Hochwasserereignisses erreicht. Traditionell wird das Hochwasserrisiko bewertet, indem homogene Wiederkehrintervalle von Hochwasserspitzen im gesamten Einzugsgebiet angenommen werden. In der Realität sind Hochwasserereignisse jedoch räumlich heterogen, weshalb die traditionelle Annahme von Homogenität das Hochwasserrisiko insbesondere für große Einzugsgebiete falsch einschätzt. In dieser Arbeit wird die Bedeutung der räumlichen Abhängigkeit bei der Bewertung des Hochwasserrisikos in großem Maßstab in zwei Studien für verschiedene räumliche Skalen untersucht. In der ersten Untersuchung wird die „reale“ räumliche Abhängigkeit durch einen kontinuierlichen Risikomodellierungsansatz dargestellt. Zusätzlich werden die Risikoabschätzungen unter dieser modellierten Abhängigkeitsannahme mit zwei weiteren Annahmen zur räumlichen Abhängigkeit der Wiederkehrintervalle von Hochwasser verglichen: vollständige Abhängigkeit und Unabhängigkeit für das Elbeeinzugsgebiet in Deutschland. Die zweite Studie repräsentiert die „reale“ räumliche Abhängigkeit durch ein copula-basiertes Abhängigkeitsmodell. In ähnlicher Weise werden die drei verschiedenen Annahmen zur räumlichen Abhängigkeit der Wiederkehrintervalle von Hochwasser auf nationaler und kontinentaler Ebene verglichen. Außerdem wird der Einfluss von „Tail-dependences“ im Modell sowie von Hochwasserschutzmaßnahmen auf die räumliche Abhängigkeit untersucht. Die Ergebnisse dieser Arbeit unter Anwendung des Sensitivitätsanalyse-Frameworks zeigen, dass das Hochwasserrisiko aufgrund möglicher Änderungsszenarien dramatisch variieren kann. Der Einfluss des Klimawandels kann durch Änderungen anderer Risikokomponenten (z. B. Änderungen der Deichsysteme und der Vulnerabilität) überdeckt werden. Die Untersuchung zur räumlichen Abhängigkeit zeigen, dass der Schaden unter der Annahme vollständiger Abhängigkeit für Ereignisse mit Wiederkehrintervalle von mehr als ungefähr 200 Jahren im Elbeeinzugsgebiet 100 % größer als der Schaden unter modellierter Abhängigkeit. Die Annahme vollständiger Abhängigkeit überschätzt den 200-jährigen Hochwasserschaden, einen Referenzindikator für die Versicherungsbranche, um 139 %, 188 % und 246 % für Vereinigte Königreich, Deutschland und Europa. Die Fehleinschätzung des Hochwasserrisikos kann unter verschiedenen Annahmen von Abhängigkeit zwischen Oberlauf und Unterlauf eines Einzugsgebietes stark variieren. Zudem können „Tail-dependences“ im Modell sowie der Hochwasserschutz im Einzugsgebiet die Ergebnisse der Risikoabschätzung, unter verschiedenen Annahmen der räumlichen Abhängigkeit, beeinflussen. Abschließend wird eine umfangreiche Berücksichtigung der Risikokomponenten und insbesondere der räumlichen Abhängigkeit von Wiederkehrintervallen stark empfohlen, um das Hochwasserrisiko und damit dessen Management und Minderung besser verstehen zu können.

Description: The 2014 LoNNe (Loss of the Night Network) intercomparison campaign is the third of four campaigns planned during EU COST Action ES1204. This report provides a brief synopsis of the campaign and its preliminary outcomes. Section 2 describes the measurement locations, the activities of the participants, the instruments used, and the environmental conditions. Section 3 describes a public outreach event held during the campaign. Section 4 provides some preliminary results, outlines the ongoing analyses, and presents research questions for the next campaign to address. Section 5 provides recommendations for the final LoNNe intercomparison campaign in 2016. Section 6 concludes the report.

Description: In March 2010, the project CoCoCo (incipient COntinent-COntinent COllision) recorded a 650 km long amphibian N-S wide-angle seismic profile, extending from the Eratosthenes Seamount (ESM) across Cyprus and southern Turkey to the Anatolian plateau. The aim of the project is to reveal the impact of the transition from subduction to continent-continent collision of the African plate with the Cyprus-Anatolian plate. A visual quality check, frequency analysis and filtering were applied to the seismic data and reveal a good data quality. Subsequent first break picking, finite-differences ray tracing and inversion of the offshore wide-angle data leads to a first-arrival tomographic model. This model reveals (1) P-wave velocities lower than 6.5 km/s in the crust, (2) a variable crustal thickness of about 28 - 37 km and (3) an upper crustal reflection at 5 km depth beneath the ESM. Two land shots on Turkey, also recorded on Cyprus, airgun shots south of Cyprus and geological and previous seismic investigations provide the information to derive a layered velocity model beneath the Anatolian plateau and for the ophiolite complex on Cyprus. The analysis of the reflections provides evidence for a north-dipping plate subducting beneath Cyprus. The main features of this layered velocity model are (1) an upper and lower crust with large lateral changes of the velocity structure and thickness, (2) a Moho depth of about 38 - 45 km beneath the Anatolian plateau, (3) a shallow north-dipping subducting plate below Cyprus with an increasing dip and (4) a typical ophiolite sequence on Cyprus with a total thickness of about 12 km. The offshore-onshore seismic data complete and improve the information about the velocity structure beneath Cyprus and the deeper part of the offshore tomographic model. Thus, the wide-angle seismic data provide detailed insights into the 2-D geometry and velocity structures of the uplifted and overriding Cyprus-Anatolian plate. Subsequent gravity modelling confirms and extends the crustal P-wave velocity model. The deeper part of the subducting plate is constrained by the gravity data and has a dip angle of ~ 28°. Finally, an integrated analysis of the geophysical and geological information allows a comprehensive interpretation of the crustal structure related to the collision process.

Description: The ability of any satellite gravity mission concept to monitor mass transport processes in the Earth system is typically tested well ahead of its implementation by means of various simulation studies. Those studies often extend from the simulation of realistic orbits and instrumental data all the way down to the retrieval of global gravity field solution time-series. Basic requirement for all these simulations are realistic representations of the spatio-temporal mass variability in the different sub-systems of the Earth, as a source model for the orbit computations. For such simulations, a suitable source model is required to represent (i) high-frequency (i.e., sub-daily to weekly) mass variability in the atmosphere and oceans, in order to realistically include the effects of temporal aliasing due to non-tidal high-frequency mass variability into the retrieved gravity fields. In parallel, (ii) low-frequency (i.e., monthly to interannual) variability needs to be modelled with realistic amplitudes, particularly at small spatial scales, in order to assess to what extent a new mission concept might provide further insight into physical processes currently not observable. The new source model documented here attempts to fulfil both requirements: Based on ECMWF’s recent atmospheric reanalysis ERA-Interim and corresponding simulations from numerical models of the other Earth system components, it offers spherical harmonic coefficients of the time-variable global gravity field due to mass variability in atmosphere, oceans, the terrestrial hydrosphere including the ice-sheets and glaciers, as well as the solid Earth. Simulated features range from sub-daily to multiyear periods with a spatial resolution of spherical harmonics degree and order 180 over a period of 12 years. In addition to the source model, a de-aliasing model for atmospheric and oceanic high-frequency variability with augmented systematic and random noise is required for a realistic simulation of the gravity field retrieval process, whose necessary error characteristics are discussed. The documentation is organized as follows: The characteristics of the updated ESM along with some basic validation are presented in Volume 1 of this report (Dobslaw et al., 2014). A detailed comparison to the original ESA ESM (Gruber et al., 2011) is provided in Volume 2 (Bergmann-Wolf et al., 2014), while Volume 3 (Forootan et al., 2014) contains a description of the strategy to derive a realistically noisy de-aliasing model for the high-frequency mass variability in atmosphere and oceans. The files of the updated ESA Earth System Model for gravity mission simulation studies are accessible at DOI:10.5880/GFZ.1.3.2014.001.

Description: SEGY and supplementary data of the seismic reflection experiment in the Baza Basin (Southern Spain). Presented are unstacked and unmigrated data of three 2D vibroseis profiles which were carried out in October 2013 and all corresponding raw data.

Description: This publication is a result of the 13th TRACE conference (Tree Rings in Archaeology, Climatology and Ecology) organized by the Department of Earth and Environmental Sciences at the University of St Andrews on May 6th – 10th, 2014 in Aviemore, Scotland, UK. [...]After review, 18 short papers are published in this volume, giving an overview of the wide spectrum of different fields covered at TRACE.

Description: This dissertation was carried out as part of the international and interdisciplinary graduate school StRATEGy. This group has set itself the goal of investigating geological processes that take place on different temporal and spatial scales and have shaped the southern central Andes. This study focuses on claystones and carbonates of the Yacoraite Fm. that were deposited between Maastricht and Dan in the Cretaceous Salta Rift Basin. The former rift basin is located in northwest Argentina and is divided into the sub-basins Tres Cruces, Metán-Alemanía and Lomas de Olmedo. The overall motivation for this study was to gain new knowledge about the evolution of marine and lacustrine conditions during the Yacoraite Fm. Deposit in the Tres Cruces and Metán-Alemanía sub-basins. Other important aspects that were examined within the scope of this dissertation are the conversion of organic matter from Yacoraite Fm. into oil and its genetic relationship to selected oils produced and natural oil spills. The results of my study show that the Yacoraite Fm. began to be deposited under marine conditions and that a lacustrine environment developed by the end of the deposition in the Tres Cruces and Metán-Alemanía Basins. In general, the kerogen of Yacoraite Fm. consists mainly of the kerogen types II, III and II / III mixtures. Kerogen type III is mainly found in samples from the Yacoraite Fm., whose TOC values are low. Due to the adsorption of hydrocarbons on the mineral surfaces (mineral matrix effect), the content of type III kerogen with Rock-Eval pyrolysis in these samples could be overestimated. Investigations using organic petrography show that the organic particles of Yacoraite Fm. mainly consist of alginites and some vitrinite-like particles. The pyrolysis GC of the rock samples showed that the Yacoraite Fm. generates low-sulfur oils with a predominantly low-wax, paraffinic-naphthenic-aromatic composition and paraffinic wax-rich oils. Small proportions of paraffinic, low-wax oils and a gas condensate-generating facies are also predicted. Here, too, mineral matrix effects were taken into account, which can lead to a quantitative overestimation of the gas-forming character. The results of an additional 1D tank modeling carried out show that the beginning (10% TR) of the oil genesis took place between ≈10 Ma and ≈4 Ma. Most of the oil (from ≈50% to 65%) was generated prior to the development of structural traps formed during the Plio-Pleistocene Diaguita deformation phase. Only ≈10% of the total oil generated was formed and potentially trapped after the formation of structural traps. Important factors in the risk assessment of this petroleum system, which can determine the small amounts of generated and migrated oil, are the generally low TOC contents and the variable thickness of the Yacoraite Fm. Additional risks are associated with a low density of information about potentially existing reservoir structures and the quality of the overburden.

Description: Diese Dissertation wurde im Rahmen des internationalen und interdisziplinären Graduiertenkollegs StRATEGy durchgeführt. Diese Gruppe hat sich zum Ziel gesetzt, geologische Prozesse zu untersuchen, die auf unterschiedlichen zeitlichen und räumlichen Skalen ablaufen und die südlichen Zentralanden geprägt haben. Diese Studie konzentriert sich auf die Tonsteine und Karbonate der Yacoraite Fm., die zwischen Maastricht und Dan im kreidezeitlichen Salta-Grabenbecken abgelagert wurden. Das ehemalige Riftbecken liegt im Nordwesten Argentiniens und gliedert sich in die Teilbecken Tres Cruces, Metán-Alemanía und Lomas de Olmedo. Die übergreifende Motivation für diese Studie war es, neue Erkenntnisse über die Entwicklung der marinen und lakustrinen Bedingungen während der Ablagerung der Yacoraite Fm. in den Tres Cruces und Metán-Alemanía Sub-Becken zu gewinnen. Weitere wichtige Aspekte, die im Rahmen dieser Dissertation untersucht wurden, sind die Umwandlung von organischer Materie der Yacoraite Fm. in Öl sowie deren genetische Beziehung zu ausgewählten produzierten Ölen und natürlichen Ölaustritten. Die Ergebnisse meiner Studie zeigen, dass die Ablagerung der Yacoraite Fm. unter marinen Bedingungen begann und sich bis zum Ende der Ablagerung in den Tres Cruces- und Metán-Alemanía-Becken ein lakustrines Milieu entwickelte. Im Allgemeinen besteht das Kerogen der Yacoraite Fm. überwiegend aus den Kerogentypen II, III und II/III-Mischungen. Der Kerogentyp III findet sich vor allem in Proben aus der Yacoraite Fm., deren TOC-Werte niedrig sind. Aufgrund der Adsorption von Kohlenwasserstoffen an den Mineraloberflächen (Mineralmatrixeffekt) könnte der Gehalt an Typ-III-Kerogen mit der Rock-Eval-Pyrolyse in diesen Proben überschätzt werden. Untersuchungen mittels organischer Petrographie zeigen, dass die organischen Partikel der Yacoraite Fm. hauptsächlich aus Alginiten und einigen Vitrinit-artigen Partikeln bestehen. Die Pyrolyse-GC der Gesteinsproben zeigte, dass die Yacoraite Fm. schwefelarme Öle mit einer überwiegend Wachs-armen paraffinisch-naphthenisch-aromatischen Zusammensetzung und paraffinische Wachs-reiche Öle generiert. Geringe Anteile paraffinischer, Wachs-armer Öle und einer Gaskondensat-generierenden Fazies werden ebenfalls vorausgesagt. Auch hier wurden Mineralmatrixeffekte berücksichtigt, die zu einer quantitativen Überschätzung des gasbildenden Charakters führen können. Die Ergebnisse einer zusätzlich durchgeführten 1D-Beckenmodellierung zeigen, dass der Beginn (10 %TR) der Ölgenese zwischen ≈10 Ma und ≈4 Ma stattfand. Der größte Teil des Öls (von ≈50 % bis 65 %) wurde vor der Entwicklung struktureller Fallen gebildet, die während der plio-pleistozänen Diaguita Deformatiosphase gebildet wurden. Nur ≈10 % des insgesamt generierten Öls wurde nach der Entstehung struktureller Fallen gebildet und potentiell darin gefangen. Wichtige Faktoren in der Risikobewertung dieses Erdölsystems, welche die geringen Mengen an generiertem und migriertem Öl bestimmen können, stellen die allgemein niedrigen TOC-Gehalte und die variable Mächtigkeit der Yacoraite Fm. dar. Weitere Risiken sind mit einer niedrigen Informationsdichte über potentiell vorhandene Reservoirstrukturen und die Qualität der Deckgesteine verbunden.

Description: Rheology describes the flow of matter under the influence of stress, and - related to solids- it investigates how solids subjected to stresses deform. As the deformation of the Earth’s outer layers, the lithosphere and the crust, is a major focus of rheological studies, rheology in the geosciences describes how strain evolves in rocks of variable composition and temperature under tectonic stresses. It is here where deformation processes shape the form of ocean basins and mountain belts that ultimately result from the complex interplay between lithospheric plate motion and the susceptibility of rocks to the influence of plate-tectonic forces. A rigorous study of the strength of the lithosphere and deformation phenomena thus requires in-depth studies of the rheological characteristics of the involved materials and the temporal framework of deformation processes. This dissertation aims at analyzing the influence of the physical configuration of the lithosphere on the present-day thermal field and the overall rheological characteristics of the lithosphere to better understand variable expressions in the formation of passive continental margins and the behavior of strike-slip fault zones. The main methodological approach chosen is to estimate the present-day thermal field and the strength of the lithosphere by 3-D numerical modeling. The distribution of rock properties is provided by 3-D structural models, which are used as the basis for the thermal and rheological modeling. The structural models are based on geophysical and geological data integration, additionally constrained by 3-D density modeling. More specifically, to decipher the thermal and rheological characteristics of the lithosphere in both oceanic and continental domains, sedimentary basins in the Sea of Marmara (continental transform setting), the SW African passive margin (old oceanic crust), and the Norwegian passive margin (young oceanic crust) were selected for this study. The Sea of Marmara, in northwestern Turkey, is located where the dextral North Anatolian Fault zone (NAFZ) accommodates the westward escape of the Anatolian Plate toward the Aegean. Geophysical observations indicate that the crust is heterogeneous beneath the Marmara basin, but a detailed characterization of the lateral crustal heterogeneities is presented for the first time in this study. Here, I use different gravity datasets and the general non-uniqueness in potential field modeling, to propose three possible end-member scenarios of crustal configuration. The models suggest that pronounced gravitational anomalies in the basin originate from significant density heterogeneities within the crust. The rheological modeling reveals that associated variations in lithospheric strength control the mechanical segmentation of the NAFZ. Importantly, a strong crust that is mechanically coupled to the upper mantle spatially correlates with aseismic patches where the fault bends and changes its strike in response to the presence of high-density lower crustal bodies. Between the bends, mechanically weaker crustal domains that are decoupled from the mantle are characterized by creep. For the passive margins of SW Africa and Norway, two previously published 3-D conductive and lithospheric-scale thermal models were analyzed. These 3-D models differentiate various sedimentary, crustal, and mantle units and integrate different geophysical data, such as seismic observations and the gravity field. Here, the rheological modeling suggests that the present-day lithospheric strength across the oceanic domain is ultimately affected by the age and past thermal and tectonic processes as well as the depth of the thermal lithosphere-asthenosphere boundary, while the configuration of the crystalline crust dominantly controls the rheological behavior of the lithosphere beneath the continental domains of both passive margins. The thermal and rheological models show that the variations of lithospheric strength are fundamentally influenced by the temperature distribution within the lithosphere. Moreover, as the composition of the lithosphere significantly influences the present-day thermal field, it therefore also affects the rheological characteristics of the lithosphere. Overall my studies add to our understanding of regional tectonic deformation processes and the long-term behavior of sedimentary basins; they confirm other analyses that have pointed out that crustal heterogeneities in the continents result in diverse lithospheric thermal characteristics, which in turn results in higher complexity and variations of rheological behavior compared to oceanic domains with a thinner, more homogeneous crust.

Description: Die Rheologie ist die Wissenschaft, die sich mit dem Fließ- und Verformungsverhalten von Materie beschäftigt. Hierzu gehören neben Gasen und Flüssigkeiten vor allem auch Feststoffe, die einer Spannung ausgesetzt sind und einem daraus resultierenden Verformungsprozess unterliegen - entweder unter bruchhaften oder plastischen Bedingungen. In den Geowissenschaften umfasst die Rheologie die kombinierte Analyse tektonischer Spannungen und resultierender Deformationsphänomene in Gesteinen unter unterschiedlichen Temperatur- und Druckbedingungen sowie im Zusammenhang mit physikalischen Eigenschaften der Krusten- und Mantelgesteine. Die Verformung des lithosphärischen Mantels und der Kruste ist ein Schwerpunkt rheologischer Untersuchungen, denn in diesem Zusammenhang bilden sich Ozeanbecken und Gebirgsgürtel, die letztendlich aus dem komplexen Zusammenspiel der Bewegungen lithosphärischer Platten und der unterschiedlichen Deformierbarkeit von Krusten- und Mantelgesteinen unter dem Einfluss plattentektonischer Kräfte resultieren. Eine genaue Untersuchung der Festigkeit der Lithosphäre und der Deformationssphänomene erfordert daher eingehende Studien der rheologischen Eigenschaften der beteiligten Materialien. Vor diesem Hintergrund ist es das Ziel dieser Dissertation, die allgemeinen rheologischen Charakteristika der Lithosphäre in drei verschiedenen geodynamischen Bereichen zu analysieren, um unterschiedlich geprägte passive Kontinentalränder sowie das Verhalten von Transformstörungen innerhalb der Kontinente besser zu verstehen. Der wichtigste methodische Ansatz, der hierfür gewählt wurde, ist die numerische 3D-Modellierung, um eine Abschätzung des gegenwärtigen thermischen Feldes und der Festigkeit der Lithosphäre zu ermöglichen. Die räumliche Verteilung der Gesteinseigenschaften in Kruste und Mantel wird dabei durch 3-D-Strukturmodelle bereitgestellt, die als Grundlage für die thermische und rheologische Modellierung verwendet werden. Die Strukturmodelle basieren auf der Integration geophysikalischer und geologischer Daten, die zusätzlich durch eine 3D-Dichtemodellierung validiert werden. Um die thermischen und rheologischen Eigenschaften der Lithosphäre sowohl im ozeanischen als auch im kontinentalen Bereich zu entschlüsseln, wurden für diese Studie Sedimentbecken im Marmarameer im Bereich der kontinentalen Nordanatolischen Transformstörung sowie im Bereich der passiven Plattenränder von SW-Afrika (alte ozeanische Kruste) und vor Norwegen (junge ozeanische Kruste) ausgewählt. Das Marmarameer im Nordwesten der Türkei befindet sich in einer Region, wo die dextrale Nordanatolische Störung (NAFZ) die westwärts gerichtete Ausweichbewegung der Anatolischen Platte in Richtung Ägäis ermöglicht. Geophysikalische Beobachtungen deuten darauf hin, dass die kontinentale Kruste unter dem Marmara-Becken heterogen ist, allerdings stellt diese Arbeit zum ersten Mal eine detaillierte Charakterisierung dieser lateralen Krustenheterogenitäten vor. Hierzu verwende ich verschiedene Schweredaten und die Potenzialfeldmodellierung, um drei mögliche Szenarien zur Erklärung der Unterschiede im Charakter der Kruste vorzuschlagen. Die Modelle legen nahe, dass ausgeprägte Schwereanomalien im Becken von signifikanten Dichte-Heterogenitäten innerhalb der Kruste hervorgerufen werden. Die rheologische Modellierung zeigt, dass damit verbundene Unterschiede in der Festigkeit der Lithosphäre die mechanische Segmentierung der NAFZ steuern und sich auf seismogene Prozesse auswirken. Demnach korrelieren Krustenbereiche hoher Festigkeit, die mechanisch an den oberen Mantel gekoppelt sind, räumlich mit aseismischen Sektoren in der Region um die Störungszone, in denen sich das Streichen der NAFZ ändert. Zwischen den Bereichen mit den veränderten Streichrichtungen der Störung existieren dagegen mechanisch schwächere Krustenbereiche, die vom Mantel entkoppelt und durch Kriechbewegungen gekennzeichnet sind. Für die passiven Kontinentalränder von SW-Afrika und Norwegen wurden zwei veröffentlichte thermische 3-D-Modelle hinsichtlich des Einflusses der Temperaturverteilung auf die Festigkeit der Lithosphäre analysiert. Diese 3-D-Modelle differenzieren verschiedene Sediment-, Krusten- und Mantelbereiche und integrieren unterschiedliche geophysikalische Daten, wie zum Beispiel seismische Beobachtungen und Schwerefeldmessungen. Hier legt die rheologische Modellierung nahe, dass die derzeitige Lithosphärenfestigkeit im ozeanischen Bereich letztlich durch das Alter und vergangene thermische und tektonische Prozesse sowie die Tiefe der thermischen Grenze zwischen Lithosphäre und Asthenosphäre beeinflusst wird, während die Konfiguration der kristallinen Kruste das rheologische Verhalten der Lithosphäre in den kontinentalen Bereichen der beiden passiven Ränder dominiert. Die thermischen und rheologischen Modelle zeigen, dass die Variationen in der Festigkeit der Lithosphäre grundlegend von der Temperaturverteilung innerhalb der Lithosphäre selbst beeinflusst werden. Dabei steuert die Zusammensetzung der Lithosphäre das heutige thermische Feld entscheidend mit und darüber auch die rheologischen Eigenschaften der Lithosphäre. Diese Ergebnisse tragen somit zu einem besseren Verständnis regionaler tektonischer Deformationsprozesse und der dynamischen Langzeitentwicklung von Sedimentbecken bei; sie bestätigen außerdem frühere Analysen, die bereits darauf hingewiesen haben, dass die Heterogenität der Kruste in den Kontinenten mit unterschiedlichen thermischen Eigenschaften der Lithosphäre einhergeht, welches wiederum zu einer höheren Komplexität und Variabilität des rheologischen Verhaltens im Vergleich zu ozeanischen Gebieten mit einer geringer mächtigen, homogeneren Kruste führt.

Description: The Global Navigation Satellite System (GNSS) plays a significant role in the fields of airborne gravimetry. The objective of this thesis is to develop reliable GNSS algorithms and software for kinematic highly precise GNSS data analysis in airborne gravimetry.

Description: Raw-, SEG-Y and other supplementary data of the amphibious wide-angle seismic experiment carried out in South Turkey, Cyprus and south of Cyprus are presented. The aim of this project was to reveal the crustal structure of the Anatolian plateau, Cyprus and the Eratosthenes Seamount (ESM), south of Cyprus. Simultaneous data acquisition offshore with ocean bottom seismometers and airguns and onshore with seismic land stations and two land shots in South Turkey lead to a 650 km long amphibian seismic profile.

Description: This report as well as the associated data is a supplement to the publication Blöcher et al. (2015) accessible via DOI: 10.1016/j.geothermics.2015.07.008. From 2011-06-01 until 2013-12-31, the measurement and control system at the Groß Schönebeck research platform acquired data from several circulation experiments. Different data values were recorded at a sampling interval of 1 s. Relevant data for understanding and analyzing the hydraulic situation of the system were resampled to a 1 minute interval. From the resampled dataset, additional parameters were derived. Furthermore, if parameters were considered to be essential, but the measurement of these parameters was erroneous, some data were reprocessed. All relevant data and processing steps performed on the data are described within this report. Data described within this report can be accessed via DOI:10.5880/GFZ.b103-15021.1. The presented data was acquired during different research projects by the staff of the International Centre for Geothermal Research as well as Section 4.1 Reservoirtechnologies at the Helmholtz Centre Potsdam GFZ German Research Centre for Geosciences.

Description: We study segregation of the subducted oceanic crust (OC) at the core mantle boundary and its ability to accumulate and form large thermochemical piles (such as the seismically observed Large Low Shear Velocity Provinces - LLSVPs). Our high-resolution numerical simulations suggest that the longevity of LLSVPs for up to three billion years, and possibly longer, can be ensured by a balance in the rate of segregation of high-density OC-material to the CMB, and the rate of its entrainment away from the CMB by mantle upwellings. For a range of parameters tested in this study, a large-scale compositional anomaly forms at the CMB, similar in shape and size to the LLSVPs. Neutrally buoyant thermochemical piles formed by mechanical stirring - where thermally induced negative density anomaly is balanced by the presence of a fraction of dense anomalous material - best resemble the geometry of LLSVPs. Such neutrally buoyant piles tend to emerge and survive for at least 3Gyr in simulations with quite different parameters. We conclude that for a plausible range of values of density anomaly of OC material in the lower mantle - it is likely that it segregates to the CMB, gets mechanically mixed with the ambient material, and forms neutrally buoyant large scale compositional anomalies similar in shape to the LLSVPs. We have developed an efficient FEM code with dynamically adaptive time and space resolution, and marker-in-cell methodology. This enabled us to model thermochemical mantle convection at realistically high convective vigor, strong thermally induced viscosity variations, and long term evolution of compositional fields.

Description: Dieser Leitfaden entstand im dreijährigen Projekt „Konzeption und Erprobung von Modellen für forschungsnahe Transferstrukturen in der außeruniversitären Forschung“ – kurz TMod – auf Initiative von zwei Leibniz-Instituten und drei Helmholtz-Zentren unter Projektkoordination durch das Helmholtz-Zentrum Potsdam - Deutsches Geoforschungszentrum GFZ und unter Förderung durch das BMBF, wobei sich der Kreis der Projektpartner im Projektverlauf auf insgesamt neun Einrichtungen erweiterte. Die Beteiligten waren auf der Suche nach zeitgemäßen Instrumenten, mit denen die Ergebnisse und Leistungen ihrer Wissenschaftler effektiver zu echten Innovationen werden. Die unterschiedlichen Erfahrungen, die es bis dahin mit Ausgründungen zur Professionalisierung des Wissens- und Technologietransfers gab, waren sehr unterschiedlich und vorwiegend quantitativ abstrakt aufgearbeitet. Es gab daher gerade bei mittleren und kleinen außeruniversitären Forschungseinrichtungen einen Bedarf nach fundiertem und strukturiertem Anwendungswissen, um eine entsprechende Umstrukturierung zu erleichtern. Das Projekt TMod kam diesem Bedarf mit einer Analyse von Best Practices, der Klärung offener Fragestellungen und einer darauf aufbauenden individuellen Konzeptentwicklungs- und Umsetzungsunterstützung entgegen. Der so entstandene Leitfaden soll wissenschaftliche Einrichtungen, die Ihren Technologietransfer professionalisieren wollen, praktisch unterstützen und sie vom gewonnenen Wissen im Projekt TMod profitieren lassen.

Description: Assumed comparable environmental conditions of early Mars and early Earth in 3.7 Ga ago – at a time when first fossil records of life on Earth could be found – suggest the possibility of life emerging on both planets in parallel. As conditions changed, the hypothetical life on Mars either became extinct or was able to adapt and might still exist in biological niches. The controversial discussed detection of methane on Mars led to the assumption, that it must have a recent origin – either abiotic through active volcanism or chemical processes, or through biogenic production. Spatial and seasonal variations in the detected methane concentrations and correlations between the presence of water vapor and geological features such as subsurface hydrogen, which are occurring together with locally increased detected concentrations of methane, gave fuel to the hypothesis of a possible biological source of the methane on Mars. Therefore the phylogenetically old methanogenic archaea, which have evolved under early Earth conditions, are often used as model-organisms in astrobiological studies to investigate the potential of life to exist in possible extraterrestrial habitats on our neighboring planet. In this thesis methanogenic archaea originating from two extreme environments on Earth were investigated to test their ability to be active under simulated Mars analog conditions. These extreme environments – the Siberian permafrost-affected soil and the chemoautotrophically based terrestrial ecosystem of Movile cave, Romania – are regarded as analogs for possible Martian (subsurface) habitats. Two novel species of methanogenic archaea isolated from these environments were described within the frame of this thesis. It could be shown that concentrations up to 1 wt% of Mars regolith analogs added to the growth media had a positive influence on the methane production rates of the tested methanogenic archaea, whereas higher concentrations resulted in decreasing rates. Nevertheless it was possible for the organisms to metabolize when incubated on water-saturated soil matrixes made of Mars regolith analogs without any additional nutrients. Long-term desiccation resistance of more than 400 days was proven with reincubation and indirect counting of viable cells through a combined treatment with propidium monoazide (to inactivate DNA of destroyed cells) and quantitative PCR. Phyllosilicate rich regolith analogs seem to be the best soil mixtures for the tested methanogenic archaea to be active under Mars analog conditions. Furthermore, in a simulation chamber experiment the activity of the permafrost methanogen strain Methanosarcina soligelidi SMA-21 under Mars subsurface analog conditions could be proven. Through real-time wavelength modulation spectroscopy measurements the increase in the methane concentration at temperatures down to -5 °C could be detected. The results presented in this thesis contribute to the understanding of the activity potential of methanogenic archaea under Mars analog conditions and therefore provide insights to the possible habitability of present-day Mars (near) subsurface environments. Thus, it contributes also to the data interpretation of future life detection missions on that planet. For example the ExoMars mission of the European Space Agency (ESA) and Roscosmos which is planned to be launched in 2018 and is aiming to drill in the Martian subsurface.

Description: The acronym EMERALD was supposed to stand for ElectroMagnetic Equipment, Raw data And Locations Database. What survived over the years was the EMERALD processing, a set of computer programs to analyse MT time series data, and the EMERALD file format for storing MT data. This document describes the EMERALD file format and how to use it with the C++, C and FORTRAN programming languages. Interface functions also exist for Matlab and Powershell but they are not described here. EMERALD data files typically come in pairs of two files with the same name but differing file name extensions, sometimes called RAW and XTR files. XTR (extract) files are plain ASCII files, which can be read and modified with text editors. RAW files or more generally, EMERALD ‐type data files are in most cases binary and used to store all kind of magnetotelluric (MT) data such as time series, cross‐ and auto spectra and calibration data. The EMERALD ‐type data files store any number of channels of data in matrix form, but do not contain any description of the data. This information is stored in the according XTR file. In 2015 the original XTR files were replaced by a modernized version based on the Extensible Markup Language (XML). The new files have the extension .XTRX.

Description: An important contribution of geosciences to the renewable energy production portfolio is the exploration and utilization of geothermal resources. For the development of a geothermal project at great depths a detailed geological and geophysical exploration program is required in the first phase. With the help of active seismic methods high-resolution images of the geothermal reservoir can be delivered. This allows potential transport routes for fluids to be identified as well as regions with high potential of heat extraction to be mapped, which indicates favorable conditions for geothermal exploitation. The presented work investigates the extent to which an improved characterization of geothermal reservoirs can be achieved with the new methods of seismic data processing. The summations of traces (stacking) is a crucial step in the processing of seismic reflection data. The common-reflection-surface (CRS) stacking method can be applied as an alternative for the conventional normal moveout (NMO) or the dip moveout (DMO) stack. The advantages of the CRS stack beside an automatic determination of stacking operator parameters include an adequate imaging of arbitrarily curved geological boundaries, and a significant increase in signal-to-noise (S/N) ratio by stacking far more traces than used in a conventional stack. A major innovation I have shown in this work is that the quality of signal attributes that characterize the seismic images can be significantly improved by this modified type of stacking in particular. Imporoved attribute analysis facilitates the interpretation of seismic images and plays a significant role in the characterization of reservoirs. Variations of lithological and petro-physical properties are reflected by fluctuations of specific signal attributes (eg. frequency or amplitude characteristics). Its further interpretation can provide quality assessment of the geothermal reservoir with respect to the capacity of fluids within a hydrological system that can be extracted and utilized. The proposed methodological approach is demonstrated on the basis on two case studies. In the first example, I analyzed a series of 2D seismic profile sections through the Alberta sedimentary basin on the eastern edge of the Canadian Rocky Mountains. In the second application, a 3D seismic volume is characterized in the surroundings of a geothermal borehole, located in the central part of the Polish basin. Both sites were investigated with the modified and improved stacking attribute analyses. The results provide recommendations for the planning of future geothermal plants in both study areas.

Description: The sources for the magnetotelluric method are naturally occurring electromagnetic field variations. Electromagnetic currents are excited over a wide frequency range in the earth’s ionosphere by solar activity and global lighting discharges. While these source are available everywhere on earth and at all times, their signal strength varies considerably. The so-called remote-reference technique is an effective way to improve magnetotelluric data quality by referencing the electromagnetic fields recorded at a local site to simultaneously recorded, undisturbed fields at a remote site. The remote reference approach has become standard for magnetotelluric field work, particularly in areas with high levels of man-made electromagnetic noise; i.e. almost everywhere in central Europe. Identifying a suitable location for a clean remote site is difficult and time-consuming. Maintaining such a site in addition to normal field operations is expensive and logistically challenging. A permanently installed reference station simplifies MT measurements considerably. The radius for which source fields are coherent depends mostly on the frequency content of the signals and the latitude of observations. According to our own tests, signals are coherent at frequencies of up to 10 kHz over distances of 1000 km. After a reconnaissance operation during which several locations all over Germany were tested, we could eventually identify an urban forest near the town of Wittstock in northern Germany as a suitable location for a reference station. A preliminary installation of the reference station was accomplished by mid-2010. The permanent installation in a wooden hut and operating with a range of sensors and sampling rates is available since November 2010. Meanwhile the data of the Wittstock site have been used very successfully to re-process a number of magnetotelluric stations in Germany. This report describes the installation, the type of sensors and the recorded data sets, which are freely available on request. For updated material, please refer to our webpages (http://www.gfz-potsdam.de/en/section/geophysical-deep-sounding/servicesinfrastructure/geophysical-instrument-pool-potsdam-gipp/archive/mt-reference-site/)

Description: Abstract

Description: In August and September 2013, 17 shallow ocean bottom seismograph (S-OBS) stations and 8 land stations had been deployed on and around Muostakh Island (Laptev Sea, Russia) for a time period of 24 days. The specifically designed underwater recording equipment consists of a low-power digital recorder, a standard 4.5Hz 3-component geophone, and a battery pack. These components are enclosed in a watertight cylindrical container safe for operation down to 100m water depth. Land stations were also equipped with 4.5 Hz 1C-geophones as well as with batteries. All instruments recorded continuously with 200 samples per second (sps). The stations were deployed along two profiles covering a region of 8km x 8 km. The tilt of the geophone inside the S-OBS influences the sensor characteristics. Since the orientation and tilt at the ocean bottom was unknown, approximately every 24 hours a calibration signal (a sequence of step-functions) was applied to the sensors of the ocean stations. This might be used to recover the actual sensor characteristics (eigenfrequency and damping). The dataset contains 1) a info-folder with a) a README file; b) a file containing the times when calibration signals occurred (format: recorder_ID - date - time); c) the station table (ASCII; recorder_ID - latitude - longitude - (water)depth); d) a map of the region with the locations of the stations; 2) raw CUBE-formatted data; 3) converted mini-seed-formatted data (hourly files).