ALBERT

Description: Five years after the Earth Summit in Rio de Janeiro, the hesitancy of developed countries is turning out to be the main impediment to implementing an effective policy for sustainable development. Alongside the further development of international environmental regimes, setting up national action plans is necessary to close the action-gap in the North. However, this can only succeed if the action plans include binding objectives that can be monitored and evaluated. Current national strategies for sustainable development only meet this criterion in exceptional cases; in most cases only qualitatively and legally nonbinding objectives are included. In the present paper, a suggestion for a cluster of environmental policy targets is put forth, which - using Germany as an example - establishes the sustainability concept at the national level. Particular emphasis is placed on the normative dimension of target setting.

Description: The issue or concept of "sustainable development" entered onto the public and political agenda only relatively recently, and, five years after signing Agenda 21, perceptions of it are still ambiguous. A review of organisational adjustments and of German communications to the United Nations Commission on Sustainable Development shows that the German government's level of commitment to Agenda 21 is still low. This view is supported by an assessment of developments, and the Government's poor performance so far, in three institutional indicators. However, there is evidence that some incremental steps towards a sustainability transition are being taken as in some areas of business and industry and local government attitudes are begining to change. In addition, awareness of sustainable development is being raised by the efforts of non‐governmental organisations and the scientific community. Generally though, the lack of institutional reorganisation is the major obstacle to a German sustainability transition. This is an expression of the generally low priority of environmental and global development issues in the aftermath of German unification and the related economic and social problems. The traditional economic paradigm where economic growth is believed to be the precondition for welfare prevails and is considered by a majority of decision‐makers not to be compatible with the sustainability transition.

Description: This paper takes a look at the development of freight transport and its further perspectives in the light of environmental sustainability. It clearly challenges the traditional view that further growth in freight transport is indispensable whatever stage of economic development an individual economy has achieved. Moreover it suggests measures to be taken into consideration in sectors other than the transport sector which may help to break the trend of continuing freight transport growth. Current developments of freight transport volume and modal split are rather counterproductive as regards curbing the unwanted environmental impacts. As growth in volume is a major contributing factor for most adverse effects caused, a substantial decoupling of economic growth and freight transport would be extremely helpful. While freight transport activity is almost entirely derived demand there can be no sufficient solution for the resulting environmental problems within the sector itself. Therefore, it is necessary to examine potentials for reducing demand for freight transport in all sectors of the economy. Contrasting to the widely held view that freight transport is in general an inevitable prerequisite of economic development, there are potentials for reducing the freight intensity of the economy which could be far more exploited. Such potentials are increasing the share of regional production, slowing down the metabolism of materials in the economy, and substituting transfer of information for transport of physical products. While each of these potentials on its own may appear to offer limited effects, a proper combination might yield substantial results. The presented preliminary ideas suggest that the notion of everlasting freight transport growth is misleading and hint at the necessity for further research.

Description: A local, broadband, seismic network of four observatory-quality stations (KTB-NET) was operated during the drilling of the KTB hole, within the framework of the interdisciplinary German Continental Deep Drilling Program (KTB). The aim was to investigate the seismic activity with regard to the tectonic stress field and to compare it with data from in situ measurements in the 9.1-km deep borehole sections (bottom temperature of 260°C and heat flow of 82–85 mW/m2). From October 1990 to November 1995, over 80 local microearthquakes with magnitudes from 0.2 to 2.8 ML were recorded: eight small events by the KTB-NET only and four earthquake swarms with 73 events by the KTB-NET and stations of the Vogtland/Western Bohemia networks. Six of the small events are located within or close to the KTB-NET. The swarm events occurred at the southwestern extension of the Ohre rift, in an area 20 km north of the drill site, which is revealed to be part of the Vogtland/Western Bohemia seismotectonic unit, characterized by swarm activity. The hypocenters are limited to the upper 13 km of the crust, with a distinct concentration between 10 and 12 km. All types of fault plane solutions are found, but at depths greater than 8 km, reversed faulting mechanisms predominate. P axes are very uniformly oriented in a NNW-SSE direction, corresponding to the well-known regional stress orientation in central Europe and in agreement with the special in situ stress measurements of the KTB program. The focal mechanism of a ML=1.2 event induced by a fluid injection experiment fits into the results obtained from the natural events. Possible indications for the brittle-ductile transition are discussed in view of the observed earthquake depth and focal mechanism distributions.

Description: For almost 10 years the KTB superdeep drilling project has offered an excellent field laboratory for adapting seismic techniques to crystalline environments and for testing new ideas for interpreting seismic reflections in terms of lithological or textural properties of metamorphic rock units. The seismic investigations culminated in a three-dimensional (3-D) reflection survey on a 19 × 19 km area with the drill site at its center. Interpretation of these data resulted in a detailed, structural model of the German Continental Deep Drilling Program (KTB) location with dominant, steep faults in the upper crust. The 3-D reflection survey was part of a suite of seismic experiments, ranging from wide-angle reflection and refraction profiles to standard vertical seismic profiles (VSP) and more sophisticated surface-to-borehole observations. It was predicted that the drill bit would meet the most prominent, steeply dipping, crustal reflector at a depth of about 6500–7000 m, and indeed, the borehole penetrated a major fault zone in the depth interval between 6850 and 7300 m. This reflector offered the rare opportunity to relate logging results, reflective properties, and geology to observed and modeled data. Post-Variscan thrusting caused cataclastic deformation, with partial, strong alterations within a steeply dipping reverse fault zone. This process generated impedance contrasts within the fault zone on a lateral scale large enough to cause seismic reflections. This was confirmed by borehole measurements along the whole 9.1 km deep KTB profile. The strongest, reflected signals originated from fluid-filled fractures and cataclastic fracture zones rather than from lithological boundaries (i.e., first-order discontinuities between different rock types) or from texture- and/or foliation-induced anisotropy. During the interpretation of seismic data at KTB several lessons were learned: Conventional processing of two-dimensional (2-D) reflection data from a presite survey showed predominantly subhorizontal layering in the upper crust with reflectivity striking in the Variscan direction. Drilling, however, revealed that all rock units are steeply dipping. This confirms that surface common depth point (CDP) seismics strongly enhances subhorizontal reflectivity and may thus produce a very misleading crustal image. Although this was shown for synthetic examples earlier, the KTB provides the experimental proof of how crucial this insight can be.

Description: The PUNA (Plateau Untersuchung Nw Argentinien) seismograph network was deployed across the Andes at ∼23.5°S. The array was centered in the backarc, atop the Puna high plateau in NW Argentina and was in operation for approximately 100 days between late August and late November 1997. Most stations were equipped with short-period1-Hz 3-component seismometers and PDAS data loggers recording continuously 100 sps. The deployment was part of the collaborative research center „Deformation processes in the Andes - SFB267”. Waveform data are available from the GEOFON data centre, under network code ZB under CC-BY 4.0 license.

Description: The tremor wave‐field at Mt.Etna was recorded with an array of three 3‐component broadband seismometers. The analysis of its polarisation and dispersion properties leads to the conclusions that (1) the wave‐field consists mainly of surface waves and that (2) two of the observed spectral peaks are caused by a wave guide effect along the propagation path.

Description: The wave-field of volcano-induced seismic signals at Stromboli volcano (Italy) was observed using a network of four broadband seismometers. In addition to the standard spectral analysis of the recorded signals, new spectral techniques such as wavelet transform and wavelet coherence analysis were also used in order to discriminate between signals related to volcanic tremor and volcanic explosions. The common features of these two types of signals are characterised by the maximum of the power spectral density values located in the frequency band > 2.0 Hz, and the main orientation of the principal axes of the particle motion ellipsoids in the frequency bands analysed. The seismic signals of the volcanic explosions at Stromboli cover the total frequency band, whereas the spectral content of the volcanic tremor is restricted to narrow frequency bands ranging from 0.3–5.0 Hz. In order to localize both types of signals, a modified inversion technique was used. The result of this beam-forming on diffraction hyperboloids of both types of signals reveal a surprisingly shallow source location ranging from 0.2 km–0.7 km above sea level, suggesting that the sources of the volcanic explosions, as well as of the volcanic tremor, are restricted to the uppermost parts of the volcano. This is in agreement with several nonseismological observations of this volcano. The combination of spectral analysis of volcanic tremor and volcanic explosions with the analysis of ground displacement implies a mechanism which can be described by an ascending bubble of volcanic gas in a nearly closed volcanic system, and finally the forced ejection of the material through a narrow channel at the top of the magma column.

Description: A fluid injection-induced seismicity experiment was conducted in the German Continental Deep Drilling Program (KTB) main borehole at 9.1 km depth (in situ temperature of 260°C) to extend knowledge about stress magnitudes and brittle faulting to depths and temperatures approaching the brittle-ductile transition. Almost 400 microearthquakes were induced at an average depth of 8.8 km by injection of KBr/KCl brine into a ∼70 m open hole section near the bottom of the borehole. Although most focal plane mechanisms were poorly constrained due to the very small size of the induced earthquakes, several different clusters of microearthquakes with distinct mechanisms were defined. Most of the microearthquakes for which focal plane mechanisms were determined were strike-slip events with a NNW trending P axis, essentially parallel to the direction of maximum horizontal compression observed in the borehole. The largest induced earthquake, M 1.2, occurred 18 hours after injection was started. This event was a strike-slip/reverse faulting event which also had a NNW trending P axis. Utilization of a precise relative location technique indicates that many of microearthquakes occurred relatively far (50–100 m) from the well bore. Modeling of the pore pressure disturbance caused by injection suggests that many of the earthquakes were induced by extremely small pore pressure perturbations (〈1 MPa) less than 1% greater than the ambient, approximately hydrostatic pore pressure at depth. Thus it is apparent that there are critically stressed, permeable fault zones in the crust, even at great depth and temperature. A frictional analysis of the focal plane mechanisms of the induced microearthquakes indicates that fault slip is consistent with the stress magnitudes and orientations determined in situ at depths to 7.7 km in the borehole and relatively high coefficients of friction (∼0.6–0.7) reported by Brudy et al. [this issue]. This and the observation that very small pore pressure perturbations were able to trigger seismicity appear to confirm the hypothesis that “Byerlee's law” (i.e., that differential stresses in situ are limited by the frictional strength of well-oriented, preexisting faults) is valid to great crustal depth and that the crust is in brittle failure equilibrium at depths and temperatures approaching the brittle-ductile transition, even in this relatively stable intraplate area.

Description: For many years, in situ stress in the brittle crust has been measured at relatively shallow depth and related to the mechanical behavior of the crust as inferred from laboratory studies and faulting theory. A continuous profile of the magnitudes and orientations of the three principal stresses has been estimated to depths of 7.7 km and 8.6 km in the German Continental Deep Drilling Program (KTB). This was achieved by hydraulic fracturing tests at relatively shallow depth (1–3 km), estimates of the magnitude of the least horizontal principal stress provided by modified hydraulic fracturing experiments at 6 km and 9 km depths, and analysis of compressional (breakouts) and tensile (drilling-induced tensile wall fractures) failures of the borehole wall over nearly the entire depth of the KTB borehole. The orientation of the maximum horizontal principal stress was found to be uniform with depth with an orientation of N160°±10°E, which is consistent with the average orientation found throughout western Europe. The only significant change in stress orientation was observed directly below a major fault zone crosscutting the borehole. The profile of stress magnitudes we have obtained demonstrates that to a depth of 8 km, the state of stress in the brittle crust in southern Germany is in frictional equilibrium. That is, the ratio of shear to normal stress as resolved on preexisting faults which are well-oriented to the in situ stress field is comparable to their frictional strength based on predictions of Coulomb faulting theory for a coefficient of friction of about 0.7 and near-hydrostatic pore pressure.