ALBERT

Description: This investigation analyzes the effect of vortex wakes on the Lagrangian displacement of particles induced by the passage of an obstacle in a two-dimensional incompressible and inviscid fluid. In addition to the trajectories of individual particles, we also study their drift and the corresponding total drift areas in the Föppl and Kirchhoff potential flow models. Our findings, which are obtained numerically and in some regimes are also supported by asymptotic analysis, are compared to the wakeless potential flow which serves as a reference. We show that in the presence of the Föppl vortex wake, some of the particles follow more complicated trajectories featuring a second loop. The appearance of an additional stagnation point in the Föppl flow is identified as a source of this effect. It is also demonstrated that, while the total drift area increases with the size of the wake for large vortex strengths, it is actually decreased for small circulation values. On the other hand, the Kirchhoff flow model is shown to have an unbounded total drift area. By providing a systematic account of the wake effects on the drift, the results of this study will allow for more accurate modeling of hydrodynamic stirring.

Description: The slow motion of a circular cylinder in a plane Poiseuille flow in a microchannel is analyzed for a wide range of cylinder radii and positions across the channel. The cylinder translates parallel to the channel walls and rotates about its axis. The Stokes approximation is used and the problem is solved analytically using the Papkovich-Fadle eigenfunction expansion and the least-squares method. The stream function and the pressure distribution of the flow field are obtained as results. The force and moment exerted on the cylinder, and the pressure change far from the cylinder, are calculated and shown as functions of the size and location of the cylinder. The results confirm some reciprocal relations exactly. In particular, the translational and rotational velocities of the drifting cylinder in the existing Poiseuille flow are determined. The induced pressure change, when the cylinder drifts in the Poiseuille flow, is also calculated. Some typical streamline patterns, depending on the size and location of the cylinder, are shown and discussed. When the cylinder translates and/or rotates in the channel blocked at infinity, a series of Moffatt eddies appears far from the cylinder in the channel, as expected.

Description: Interactions between capillary and elastic effects are relevant to a variety of applications from micro- and nano-scale manufacturing to biological systems. In this work, we investigate capillary flows in flexible, millimeter-scale cylindrical elastic tubes. We demonstrate that surface tension can cause sufficiently flexible tubes to collapse and coalesce spontaneously through non-axisymmetric buckling, and develop criteria for the initial deformation and complete collapse of a circular tube. Experimental results for capillary rise and evaporation of a liquid in a flexible tube are presented, and several regimes are seen for the equilibrium state of a flexible tube deforming under capillary pressure. Deformations of the tube walls are measured in different regimes and compared with a shell theory model. Analysis and experimental results show that despite the complex and non-axisymmetric deformed shapes of cylindrical structures, the elastocapillary length used in previous literature for flat plates and sheets can be used to predict the behavior of flexible tubes.

Description: We present laboratory experimental results demonstrating that librational forcing of an ellipsoidal container of water can produce intense motions through the mechanism of a libration driven elliptical instability (LDEI). These libration studies are conducted using an ellipsoidal acrylic container filled with water. A particle image velocimetry method is used to measure the 2D velocity field in the equatorial plane over hundreds libration cycles for a fixed Ekman number, E = 2 × 10 −5 . In doing so, we recover the libration induced base flow and a time averaged zonal flow. Further, we show that LDEI in non-axisymmetric container geometries is capable of driving both intermittent and saturated turbulent motions in the bulk fluid. Additionally, we measure the growth rate and amplitude of the LDEI induced excited flow in a fully ellipsoidal container at more extreme parameters than previously studied [Noir et al. , “Experimental study of libration-driven flows in nonaxisymmetric containers,” Phys. Earth Planet. Inter. 204-205 , 1 (2012); Cébron et al. , Phys. Fluids 24 , 061703, “Libration driven elliptical instability,” (2012)]. Excitation of bulk filling turbulence by librational forcing provides a mechanism for transferring rotational energy into turbulent fluid motion and thus can play an important role in the thermal evolution, interior dynamics, and magneto-hydrodynamics of librating bodies, as appear to be common in solar system settings [e.g., Comstock and Bills, “A solar system survey of forced librations in longitude,” J. Geophys. Res. Planets 108 , 1 (2003)].

Description: We numerically study the displacement flow of two iso-viscous Newtonian fluids in an inclined two-dimensional channel, formed by two parallel plates. The results are complementary to our previous studies on displacement flows in pipes and channels. The heavier displacing fluid moves the lighter displaced fluid in the downward direction. Three dimensionless groups largely describe these flows: the densimetric Froude number ( Fr ), the Reynolds number ( Re ), and the duct inclination (β). As a first order approximation, we are able to classify different flow regimes phenomenologically in a two-dimensional ( Fr ; Re cosβ/ Fr )-plane and provide leading order expressions for the transitions between different regimes. The stabilizing and/or de-stabilizing effects of the imposed mean flow on buoyant exchange flows (zero imposed velocity) are described for a broad range of dimensionless parameters.

Description: Compressible granular materials are involved in many applications, some of them being related to energetic porous media. Gas permeation effects are important during their compaction stage, as well as their eventual chemical decomposition. Also, many situations involve porous media separated from pure fluids through two-phase interfaces. It is thus important to develop theoretical and numerical formulations to deal with granular materials in the presence of both two-phase interfaces and gas permeation effects. Similar topic was addressed for fluid mixtures and interfaces with the Discrete Equations Method (DEM) [R. Abgrall and R. Saurel, “Discrete equations for physical and numerical compressible multiphase mixtures,” J. Comput. Phys. 186 (2), 361-396 (2003)] but it seemed impossible to extend this approach to granular media as intergranular stress [K. K. Kuo, V. Yang, and B. B. Moore, “Intragranular stress, particle-wall friction and speed of sound in granular propellant beds,” J. Ballist. 4 (1), 697-730 (1980)] and associated configuration energy [J. B. Bdzil, R. Menikoff, S. F. Son, A. K. Kapila, and D. S. Stewart, “Two-phase modeling of deflagration-to-detonation transition in granular materials: A critical examination of modeling issues,” Phys. Fluids 11 , 378 (1999)] were present with significant effects. An approach to deal with fluid-porous media interfaces was derived in Saurel et al. [“Modelling dynamic and irreversible powder compaction,” J. Fluid Mech. 664 , 348-396 (2010)] but its validity was restricted to weak velocity disequilibrium only. Thanks to a deeper analysis, the DEM is successfully extended to granular media modelling in the present paper. It results in an enhanced version of the Baer and Nunziato [“A two-phase mixture theory for the deflagration-to-detonation transition (DDT) in reactive granular materials,” Int. J. Multiphase Flow 12 (6), 861-889 (1986)] model as symmetry of the formulation is now preserved. Several computational examples are shown to validate and illustrate method’s capabilities.

Description: We perform a theoretical and numerical study of the Coulomb-driven electroconvection flow of a dielectric liquid between two coaxial cylinders. The specific case, where the inner to outer diameter ratio is 0.5, is analyzed. A strong unipolar injection of ions either from the inner or outer cylinder is considered to introduce free charge carriers into the system. A finite volume method is used to solve all governing equations including Navier-Stokes equations and a simplified set of Maxwell’s equations. The flow is characterized by a subcritical bifurcation in the finite amplitude regime. A linear stability criterion and a nonlinear one that correspond to the onset and stop of the flow motion, respectively, are linked with a hysteresis loop. In addition, we also explore the behavior of the system for higher values of the stability parameter. For inner injection, we observe a transition between the patterns made of 7 and 8 cells, before an oscillatory regime is attained. Such a transition leads to a second finite amplitude stability criterion. A simple modal analysis reveals that the competition of different modes is at the origin of this behavior. The charge density, as well as velocity field distributions is provided to help understand the bifurcation behavior.

Description: From a holistic view, this paper addresses a perspective of coordinated development of economy, society, and environment for regional sustainability assessment. Firstly, a comprehensive indicator system for co-evaluating the level of economic, social, and environmental subsystems is presented based on a holistic understanding of regional sustainability. Then, a coordinated development index model focusing on the level of coordination among the subsystems as well as their comprehensive development level is established. Furthermore, an empirical study of all the provinces and municipalities is conducted by collecting the panel data from 2004 to 2010. The result shows that: (1) the coordinated developments of the most developed and the most underdeveloped regions stay stable while the regions with medium development level possess more fluctuant trends during the study years; (2) regional disparities are indicated according to the grading of CDI (the coordinated development index), which are further analyzed to be related to the local economic development patterns; (3) the conditions and causes of economic, social, and environmental development in real situations under different grades of CDI are discussed through detailed case studies of typical regions, which indicate specific suggestions of sustainable development for regions in the same pattern.

Description: As the largest solid waste (SW) generator in the world, China is facing serious pollution issues induced by increasing quantities of SW. The sustainability assessment of SW management is very important for designing relevant policy for further improving the overall efficiency of solid waste management (SWM). By focusing on industrial solid waste (ISW) and municipal solid waste (MSW), the paper investigated the sustainability performance of SWM by applying decoupling analysis, and further identified the main drivers of SW change in China by adopting Logarithmic Mean Divisia Index (LMDI) model. The results indicate that China has made a great achievement in SWM which was specifically expressed as the increase of ISW utilized amount and harmless disposal ratio of MSW, decrease of industrial solid waste discharged (ISWD), and absolute decoupling of ISWD from economic growth as well. However, China has a long way to go to achieve the goal of sustainable management of SW. The weak decoupling, even expansive negative decoupling of ISW generation and MSW disposal suggests that China needs timely technology innovation and rational institutional arrangement to reduce SW intensity from the source and promote classification and recycling. The factors of investment efficiency and technology are the main determinants of the decrease in SW, inversely, economic growth has increased SW discharge. The effects of investment intensity showed a volatile trend over time but eventually decreased SW discharged. Moreover, the factors of population and industrial structure slightly increased SW.

Description: Terra Preta Sanitation (TPS) plays a key role in sustainable sanitation (SuSan) and in the sustainable management of resources such as water, energy, soil (agriculture), liquid and solid organic waste streams as well as in the development of sustainable urban environment and infrastructure systems. This paper discusses the advantages of, and requirements for, SuSan systems, focusing on TPS. Case studies showing the stepwise extension and re-development of conventional sanitation systems (CSS) using TPS technologies and system approaches are presented and discussed. Decentralized TPS systems integrated in sustainable urban resource management were implemented in the German cities of Hamburg and Berlin. The compilation of best practice examples and findings using the newest TPS systems illustrates the immense potential of this approach for the transformation from conventional to SuSan systems. For this purpose, the potential savings of drinking water resources and the recycling potential of nutrient components are quantified. The results strongly suggest the need to encourage the development and application of innovative decentralized sanitation technologies, urban infrastructures, and resource management systems that have TP as a key component.

Description: Native chilies (Capsicum spp.) are currently underutilized in Bolivia, one of this crop’s centers of diversity. Fewer local farmers cultivate native chilies annually due to low market demand. Increasing its private use value can lead to the in-situ conservation of this crop. The objective of the paper is to evaluate the market acceptability of three native chili products: (a) chili marmalade; (b) chili cooking paste; and (c) pickled chilies. Multi-product Becker-DeGroot-Marschak experimental auctions and hedonic tests were conducted with 337 participants in La Paz and Santa Cruz. Data were analyzed using seemingly unrelated regressions. Results suggest that consumers are willing to pay price premiums of about 25–50 percent. Biodiversity conservation and improvements in farmers’ quality of life statements would not have influence on first purchase decisions but rather on repurchase decisions and therefore on consumers’ product loyalty. This in turn could lead to sustainable agro-biodiversity conservation, centered on consumers’ purchase of these products over time.

Description: This study proposes a new concept, green organisational ambidexterity, that integrates green exploration learning and green exploitation learning simultaneously. Besides, this study argues that the antecedents of green organisational ambidexterity are green shared vision and green absorptive capacity and its consequents are green radical innovation performance and green incremental innovation performance. The results demonstrate that green exploration learning partially mediates the positive relationships between green radical innovation performance and its two antecedents—green shared vision and green absorptive capacity. In addition, this study indicates that green exploitation learning partially mediates the positive relationships between green incremental innovation performance and its two antecedents—green shared vision and green absorptive capacity. Hence, firms have to increase their green shared vision, green absorptive capacity, and green organisational ambidexterity to raise their green radical innovation performance and green incremental innovation performance.

Description: The South Korean government has long been attempting to reduce the nation’s heavy reliance on fossil fuels and increase environmental safety by developing and installing renewable power generation infrastructures and implementing policies for promoting the green growth of Korea’s energy industry. This study focuses on the use of independent renewable power generation systems in the more than 3000 officially affirmed islands off Korea’s coast and proposes a simulated solution to the electricity load demand on Ulleungdo Island that incorporates several energy sources (including solar, batteries, and wind) as well as one hydro-electric and two diesel generators. Recommendations based on the simulation results and the limitations of the study are discussed.

Description: Evaluation of the sustainability of biomass pyrolysis requires a thorough assessment of the product yields and energy densities. With this purpose, a laboratory scale fixed bed reactor (FBR) was adapted from the standard Gray-King (GK) assay test on coal to conduct fixed bed pyrolysis experiments on agricultural and agro-industrial by-products. The present study provides results on the pyrolysis of two types of biomass: chipped olive tree trimmings (OT) and olive pomace (OP). Solid (char) and liquid (tar) product yields are reported. Mass yields are determined and compared with values obtained in similar works. Results indicate that char yield decreases from 49% (OT-db) and 50% (OP-db) at 325 °C to 26% (OT db) and 30% (OP-db) at 650 °C. Tar yield is almost constant (42%) at different reaction temperatures for OT, while it decreases slightly from 42% to 35% for OP. Energy density of the products at different peak temperatures is almost constant for OT (1.2), but slightly increases for OP (from a value of 1.3 to a value of 1.4).

Description: Efficient delivery and precision provision of urban public services concern quality of urban life and urban sustainability. Amid much debate regarding citizen assessments as a policy tool of public services, this study examines the validity of citizen assessments through user assessments of urban green spaces (UGSs) in Guangzhou, China. Users can distinguish the qualities of UGS across the dimensions and types, the assessment of individual UGSs matches the overall assessment of all UGSs in the city as a whole, and the overall assessment is only slightly influenced by personal backgrounds. Findings consistently support user assessments as a policy tool of UGSs and offer empirical evidence on the validity of citizen assessments. This positive evidence will encourage city managers to seriously consider citizen assessments and even institutionalize them as a standard management practice of (specific) urban public services, including UGSs, in China and abroad.

Description: The aim of this study is to analyze the environmental performance of countries and the variables that can influence it. At the same time, we performed a multivariate analysis using the HJ-biplot, an exploratory method that looks for hidden patterns in the data, obtained from the usual singular value decomposition (SVD) of the data matrix, to contextualize the countries grouped by geographical areas and the variables relating to environmental indicators included in the environmental performance index. The sample used comprises 149 countries of different geographic areas. The findings obtained from the empirical analysis emphasize that socioeconomic factors, such as economic wealth and education, as well as institutional factors represented by the style of public administration, in particular control of corruption, are determinant factors of environmental performance in the countries analyzed. In contrast, no effect on environmental performance was found for factors relating to the internal characteristics of a country or political factors.

Description: The relationship between economic growth, expansion of urban land area and the broader issue of cultivated land conversion in China has been closely examined for the late 1980s and 1990s. Much less is known about recent urban expansion and if the effects of economic growth on this expansion have changed over time. This paper updates estimates of urban expansion for China and examines the relationship with city economic growth for 1993–2012. To see if patterns are robust to different types of evidence, administrative data on the area of 225 urban cores are compared to estimates of brightly lit areas from remotely sensed night lights. The trend annual expansion rate in lit area is 8% and was significantly faster in the decade to 2002 than in the most recent decade. Expansion is slower according to administrative data, at just 5% per annum, with no change in unconditional expansion rates between decades, while conditional expansion rates have declined. The elasticity of area with respect to city economic output is about 0.3. Over time, expansion of urban land area is becoming less responsive to the growth of the local non-agricultural population.

Description: Phytoplankton patchiness, namely the heterogeneous distribution of microalgae over multiple spatial scales, dramatically impacts marine ecology. A spectacular example of such heterogeneity occurs in thin phytoplankton layers (TPLs), where large numbers of photosynthetic microorganisms are found within a small depth interval. Some species of motile phytoplankton can form TPLs by gyrotactic trapping due to the interplay of their particular swimming style (directed motion biased against gravity) and the transport by a flow with shear along the direction of gravity. Here we consider gyrotactic swimmers in numerical simulations of the Kolmogorov shear flow, both in laminar and turbulent regimes. In the laminar case, we show that the swimmer motion is integrable and the formation of TPLs can be fully characterized by means of dynamical systems tools. We then study the effects of rotational Brownian motion or turbulent fluctuations (appearing when the Reynolds number is large enough) on TPLs. In both cases, we show that TPLs become transient, and we characterize their persistence.

Description: The model of gas bubble growth in high-viscous gas-saturated magmatic melt, subjected to rapid decompression, is presented in the current study. It is shown that consideration of unsteady character of the process is extremely important in a wide range of supersaturation. The analytical solution is found for the profile of dissolved gas concentration and the rate of bubble growth. The model of kinetics of overall degassing is developed. This model is based on distinguishing the so-called “forbidden” zone in the melt volume with suppressed formation of the new nucleation sites. The simple analytical dependences of the number of nucleating bubbles and typical nucleation time on the value of initial decompression were derived together with time dependence of volumetric concentration of the gas phase. Our results match the available experimental data.

Description: We investigate the effect of viscosity contrast on the stability of gravitationally unstable, diffusive layers in porous media. Our analysis helps evaluate experimental observations of various diffusive (boundary) layer models that are commonly used to study the sequestration of CO 2 in brine aquifers. We evaluate the effect of viscosity contrast for two basic models that are characterized with respect to whether or not the interface between CO 2 and brine is allowed to move. We find that diffusive layers are in general more unstable when viscosity decreases with depth within the layer compared to when viscosity increases with depth. This behavior is in contrast to the one associated with the classical displacement problem of gravitationally unstable diffusive layers that are subject to mean flow. For the classical problem, a greater instability is associated with the displacement of a more viscous, lighter fluid along the direction of gravity by a less viscous, heavier fluid. We show that the contrasting behavior highlighted in this study is a special case of the classical displacement problem that depends on the relative strength of the displacement and buoyancy velocities. We demonstrate the existence of a critical viscosity ratio that determines whether the flow is buoyancy dominated or displacement dominated. We explain the new behaviors in terms of the interaction of vorticity components related to gravitational and viscous effects.

Description: In this study a microclimate analysis on a particular urban configuration: the—street canyon—has been carried out. The analysis, conducted by performing numerical simulations using the finite volumes commercial code ANSYS-Fluent, shows the flow field in an urban environment, taking into account three different aspect ratios (H/W). This analysis can be helpful in the study on urban microclimate and on the heat exchanges with the buildings. Fluid-dynamic fields on vertical planes within the canyon, have been evaluated. The results show the importance of the geometrical configuration, in relation to the ratio between the height (H) of the buildings and the width (W) of the road. This is a very important subject from the point of view of “Smart Cities”, considering the urban canyon as a subsystem of a larger one (the city), which is affected by climate changes.

Description: This paper analyzes the differences in the amount and the structure of residential energy consumption at the provincial level in China and identifies the hidden factors behind such differences. The econometrical analysis reveals that population, economic development level, energy resource endowment and climatic conditions are the main factors driving residential energy consumption; while the regional differences in energy consumption per capita and the consumption structure can be mainly illustrated by various economic development levels, energy resource endowments and climatic conditions. Economic development level has a significant positive impact on the proportion of gasoline consumption, whereas its impact on the proportion of electricity consumption is not notable; energy resource endowment and climatic condition indirectly affect both the proportion of electricity consumption and that of gasoline consumption, primarily through their impacts on the proportions of coal consumption and heat consumption.

Description: Urbanization transforms urban-rural landscape and profoundly affects ecological processes. To maintain a sustainable urbanization, two important issues of land-use need to be quantified: the comprehensive variation of urban-rural construction land and the specific models for consolidating these lands. The purpose of this study is to develop a framework to assess the change of urban-rural construction land and build a decision-support system for consolidating these lands. Four sub-layers were first built in the assessment framework, including the characteristic layer, the coordination layer, the potential layer and the urgency layer. Each layer encompassed specific indices for evaluating the change of urban-rural construction land in different aspects. The entropy method was then applied to the data resources from Landsat TM (Thematic Mapper) images, statistical data and overall land-use and land consolidation planning of Nantong city in coastal China to allocate weightings to the indices in each sub-layer. Finally, the decision-support system was built based on the assessment results and the degree of importance for consolidating urban and rural construction land, respectively. The results of our study show an overall investigation and quantitative description of the change of urban-rural construction land and provide an effective framework for land consolidation and land use management.

Description: The identification and characterization of particulate matter (PM) concentrations from construction site activities pose major challenges due to the diverse characteristics related to different aspects, such as concentration, particle size and particle composition. Moreover, the characterization of particulate matter is influenced by meteorological conditions, including temperature, humidity, rainfall and wind speed. This paper is part of a broader investigation that aims to develop a methodology for assessing the environmental impacts caused by the PM emissions that arise from construction activities. The objective of this paper is to identify and characterize the PM emissions on a construction site with different aerodynamic diameters (PM2.5, PM10, total suspended particulates (TSP)), based on an exploratory study. Initially, a protocol was developed to standardize the construction site selection criteria, laboratory procedures, field sample collection and laboratory analysis. This protocol was applied on a multifamily residential building construction site during three different construction phases (earthworks, superstructure and finishings) aimed at measuring and monitoring PM concentrations arising from construction activities. The particulate matter was characterized in different particle sizes. Results showed that the higher TSP emissions arising from construction activities provoked environmental impacts. Some limitations to the results were identified, especially with regards the need for a detailed investigation about the influence of different construction phases on PM emissions. The findings provided significant knowledge about various situations, serving as a basis for improving the existing methodology for particulate material collection on construction sites and the development of future studies on the specific construction site phases.

Description: With a unique cultural background and fast economic development, China’s adoption of corporate social responsibility (CSR) has become the center of discussion worldwide, and its successful implementation will have great significance for global sustainability. This paper aims to explore how CSR has given way to economic growth in China since the start of economic transition and its cultural, historical and political background, and how this has affected or been affected by the economic performance of firms. Thus, the recent calls for China to adopt CSR in its industries follow a period where the country arguably had one of the strongest implementations of CSR approaches in the world. This transition is considered in the context of a case study of a Chinese state-owned enterprise (SOE) and a group of small private firms in the same industrial sector in Zhengzhou City, Henan Province over a time span of eight years. While the CSR of the SOE has been steadily decreasing along with the change of ownership structure, its economic performance did not improve as expected. On the other hand, with a steady improvement in economic performance, the small private firms are showing a great reluctance to engage in CSR. The results indicate that implementation of CSR in China needs both the manager’s ethical awareness and the change of institutional framework. The results also raise the question as to whether CSR is a universal concept with a desired means of implementation across the developed and developing world.

Description: The development of a round liquid jet under the influence of a confined coaxial flow of an immiscible liquid of comparable density (central to annular flow density ratio of 8:10) was investigated in the vicinity of the nozzle exit. Two flow regimes were considered; one where the annular flow is faster than the central jet, so the central liquid jet is accelerated and one where the annular flow is slower, so the central liquid jet is decelerated. The central jet was visualised by high speed photography. Three modes of jet development were identified and classified in terms of the Reynolds number, Re, of the central jet which was in the range of 525 〈 Re 〈 2725, a modified definition of the Weber number, We, which allows the distinction between accelerating and deceleration flows and was in the range of −22 〈 We 〈 67 and the annular to central Momentum Ratio, MR, of the two streams which was in the range of 3.6 〈 MR 〈 91. By processing the time resolved jet images using Proper Orthogonal Decomposition (POD), it was possible to reduce the description of jet morphology to a small number of spatial modes, which isolated the most significant morphologies of the jet development. In this way, the temporal and spatial characteristics of the instabilities on the interface were clearly identified which highlights the advantages of POD over direct observation of the images. Relationships between the flow parameters and the interfacial waves were established. The wavelength of the interfacial instability was found to depend on the velocity of the fastest moving stream, which is contrary to findings for fluids with large density differences.

Description: Interaction of a vortex ring impinging on multiple permeable screens orthogonal to the ring axis was studied to experimentally investigate the persistence and decay of vortical structures inside the screen array using digital particle image velocimetry in a refractive index matched environment. The permeable screens had porosities (open area ratios) of 83.8%, 69.0%, and 55.7% and were held by a transparent frame that allowed the screen spacing to be changed. Vortex rings were generated using a piston-cylinder mechanism at nominal jet Reynolds numbers of 1000, 2000, and 3000 with piston stroke length-to-diameter ratios of 2 and 3. The interaction of vortex rings with the porous medium showed a strong dependence of the overall flow evolution on the screen porosity, with a central flow being preserved and vortex ring-like structures (with smaller diameter than the primary vortex ring) being generated near the centerline. Due to the large rod size used in the screens, immediate reformation of the transmitted vortex ring with size comparable to the primary ring (as has been observed with thin screens) was not observed in most cases. Since the screens have lower complexity and high open area ratios, centerline vortex ring-like flow structures formed with comparable size to the screen pore size and penetrated through the screens. In the case of low porosity screens (55.7%) with large screen spacing, re-emergence of large scale (large separation), weak vortical structures/pairs (analogous to a transmitted vortex ring) was observed downstream of the first screen. Additional smaller scale vortical structures were generated by the interaction of the vortex ring with subsequent screens. The size distribution of the generated vortical structures were shown to be strongly affected by porosity, with smaller vortical structures playing a stronger role as porosity decreased. Finally, porosity significantly affected the decay of total energy, but the effect of screen spacing decreased as porosity decreased.

Description: Interdisciplinary sustainability science teamwork skills are essential for addressing the world’s most pressing and complex sustainability problems, which inherently have social, natural, and engineering science dimensions. Further, because sustainability science problems exist at global scales, interdisciplinary science teams will need to consist of international members who communicate and work together effectively. Students trained in international interdisciplinary science skills will be able to hit the ground running when they obtain jobs requiring them to tackle sustainability problems. While many universities now have sustainability science programs, few offer courses that are interdisciplinary and international in scope. In the fall semester of 2013, we piloted a course for graduate students entitled “Principles of Interdisciplinary Sustainability Research” at Michigan Technological University. This course was part of our United States National Science Foundation Partnerships in International Research and Education project on bioenergy development impacts across the Americas. In this case study, we describe the course development and implementation, share critical insights from our experience teaching the course and student learning outcomes, and give recommendations for future similar courses.

Description: Vortex cavitation forming in the leading-edge vortices of a delta wing was examined to determine how the individual cavitation bubbles incepted, grew, interacted with the underlying vortical flow and produced acoustic tones. The non-cavitating vortical flow over the delta wing was chosen to be similar to those previously reported in the literature. It was found that vortex breakdown was unaffected by the presence of incipient and developed vortex cavitation bubbles in the vortex core. While some cavitation bubbles incepted, grew, and collapsed relatively quickly, others reached an equilibrium position wherein the bubble tip was stationary in the laboratory frame at a particular location along the vortex axis. For a given attack angle, the equilibrium location moved upstream with a reduction in free stream cavitation number. It is shown that the existence of these stationary vortex bubbles is possible when there is a balance between the axial growth of the bubble along the vortex axis and the opposite motion of the axial jetting flow in the vortex core, and only a single equilibrium position is possible along the axially evolving vortex for a given free stream cavitation number. These transient and stationary vortex bubbles emit significant cavitation noise upon inception, growth, and collapse. The spectral content of the noise produced was expected to be related to the interaction of the bubble with the surrounding vortical flow in a manner similar to that reported in previous studies, where sustained tones were similar to the underlying vortex frequency. However, in the present study, the dominant frequency and higher harmonics of the tones occur at a higher frequency than that of the underlying vortex. Hence, it is likely that the highly elongated stationary bubbles have higher-order volume oscillations compared to the two-dimensional radial mode of the vortex cores of vortex cavitation bubbles with much smaller diameter-to-length ratios.

Description: In most emerging economies, there has been many incentives and high availability of funding for low-cost housing projects. This has encouraged product standardization and the application of mass production ideas, based on the assumption that this is the most effective strategy for reducing costs. However, the delivery of highly standardized housing units to customers with different needs, without considering their lifestyle and perception of value, often results in inadequate products. Mass customization has been pointed out as an effective strategy to improve value generation in low-cost housing projects, and to avoid waste caused by renovations done in dwellings soon after occupancy. However, one of the main challenges for the implementation of mass customization is the definition of a set of relevant options based on users’ perceived value. The aim of this paper is to propose a method for defining value adding attributes in customized housing projects, which can support decision-making in product development. The means-end chain theory was used as theoretical framework to connect product attributes and costumers’ values, through the application of the laddering technique. The method was tested in two house-building projects delivered by a company from Brazil. The main contribution of this method is to indicate the customization units that are most important for users along with the explanation of why those units are the most relevant ones.

Description: A fiber optic daylighting system is an evolving technology for transporting illumination from sunlight into building interiors. This system is a solution developed by daylighting designers to reduce operational costs and enhance comfort. As an innovative technology, fiber optic daylighting systems can illuminate building interiors efficiently compared with other daylighting strategies. However, as a transmission medium in daylighting systems, optical fibers require uniform light distribution in sunlight concentration, which could generate heat. Therefore, this study aims to investigate the effect of heat buildup produced by end-emitting fiber optic daylighting systems in tropical buildings. The applied method adopts a new fiber optic daylighting system technology from Sweden called Parans SP3, with a 10 m cable to be tested in an actual room size under the Malaysian climatic environment, particularly within the vicinity of the main campus of the Universiti Sains Malaysia. Results show that the system generated a temperature of 1.3 °C under average conditions through fiber optic diffusers and increases indoor temperature by 0.8 °C in a 60 m3 room. According to the results, applying fiber optic daylighting systems, as renewable energy sources, generates extra heat gain in building interiors in the tropics.

Description: Coastal fisheries contribute to global food security, since fish are an important source of protein for many coastal communities in the world. However, they are constrained by problems, such as weak management of fisheries and overfishing. Local communities perceive that they are fishing less, as in other fisheries in the world. The aim of this study was to evaluate the fisheries sustainability in the Jalisco coast through the fishing footprint, or fishprint (FP), based on the primary productivity required (PPR) and the appropriated surface by the activity (biocapacity). The total catch was 20,448.2 metric tons from 2002–2012, and the average footprint was calculated to be 65,458 gha/year, a figure that quadrupled in a period of 10 years; the biocapacity decreased, and the average trophic level of catches was 3.1, which implies that it has remained at average levels, resulting in a positive balance between biocapacity and ecological footprint. Therefore, under this approach, the fishing activity is sustainable along the coast of Jalisco.

Description: Laminar flow over a periodic array of cylindrical surface roughness elements is simulated with an immersed boundary spectral method both to validate the method for subsequent studies and to examine how persistent streamwise vortices are introduced by a low Reynolds number roughness element. Direct comparisons are made with prior studies at a roughness-based Reynolds number Re k (= U ( k ) k / ν ) of 205 and a diameter to spanwise spacing ratio d / λ of 1/3. Downstream velocity contours match present and past experiments very well. The shear layer developed over the top of the roughness element produces the downstream velocity deficit. Upstream of the roughness element, the vortex topology is found to be consistent with juncture flow experiments, creating three cores along the recirculation line. Streamtraces stemming from these upstream cores, however, have unexpectedly little effect on the downstream flowfield as lateral divergence of the boundary layer quickly dissipates their vorticity. Long physical relaxation time of the recirculating wake behind the roughness remains a prominent issue for simulating this type of flowfield.

Description: This paper analyzed the characteristic of the tourism destination ecosystem from perspective of entropy in Dunhuang City. Given these circumstances, an evaluation index system that considers the potential of sustainable development was formed based on dissipative structure and entropy change for the tourism destination ecosystem. The sustainable development potential evaluation model for tourism destination ecosystem was built up based on information entropy. Then, we analyzed each indicator impact for the sustainable development potential and proposed some measures for the tourism destination ecosystem. The conclusions include: (a) the requirements of Dunhuang tourism destination ecosystem on the natural ecosystem continuously grew between 2000 and 2012; (b) The sustainable development potential of the Dunhuang tourism destination ecosystem was on an oscillation upward trend during the study period, which is dependent on government attention, and pollution problems were improved.

Description: Exploring the relationship between different services has become the focus of ecosystem services research in recent years. The agro-ecosystem, which accounts for one-third of the global land area, provides lots of services but also disservices, depending on resources provided by other systems. In this paper, we explored the agro-ecosystem from four aspects: a summary of different indicators in the agro-ecosystem, input and output changes with time, relationships between different ecosystem services and disservices, and resource contribution to major services, using Luancheng County of North China as the study area. We then used emergy analysis to unify all the indicators. The conclusions were that the agro-ecosystem maintained provisioning and regulating services but with increasing volatility under continued growth in production inputs and disservice outputs. There was a positive correlation between most of the different services and disservices. Rainfall and groundwater resources were the most used input resources in the agro-ecosystem and all other major ecosystem services depended directly on them.

Description: Integrated analysis on socio-economic metabolism could provide a basis for understanding and optimizing regional sustainability. The paper conducted socio-economic metabolism analysis by means of the emergy accounting method coupled with data envelopment analysis and decomposition analysis techniques to assess the sustainability of Qingyang city and its eight sub-region system, as well as to identify the major driving factors of performance change during 2000–2007, to serve as the basis for future policy scenarios. The results indicate that Qingyang greatly depended on non-renewable emergy flows and feedback (purchased) emergy flows, except the two sub-regions, named Huanxian and Huachi, which highly depended on renewable emergy flow. Zhenyuan, Huanxian and Qingcheng were identified as being relatively emergy efficient, and the other five sub-regions have potential to reduce natural resource inputs and waste output to achieve the goal of efficiency. The results of decomposition analysis show that the economic growth, as well as the increased emergy yield ratio and population not accompanied by a sufficient increase of resource utilization efficiency are the main drivers of the unsustainable economic model in Qingyang and call for polices to promote the efficiency of resource utilization and to optimize natural resource use.

Description: In recent years, there has been an increase in the types of marine weapons used in response to diverse hostile threats. However, because marine weapons are only tested under a single set of environmental conditions, failures due to different environmental stresses have been difficult to detect. Hence, this study proposes an environmental test sequence for multi-environment testing. The environmental test sequences for electrical units described in the international standard IEC 60068-1, and for military supply described in the United States national standard MIL-STD-810G were investigated to propose guidelines for the appropriate test sequences. This study demonstrated the need for tests in multiple environments by investigating marine weapon accidents, and evaluated which environmental stresses and test items have the largest impacts on marine weapons using a two-phase quality function deployment (QFD) analysis of operational scenarios, environmental stresses, and environmental test items. Integer programming was used to determine the most influential test items and the shortest environmental test time, allowing us to propose optimal test procedures. Based on our analysis, we developed optimal environmental test sequences that could be selected by a test designer.

Description: A widespread dissemination of improved cooking stoves in the developing world can lead to considerable improvement of health, to reduced pressure on natural woody resources and to substantial reductions of emissions contributing to global warming. A number of programs have aimed to achieve such dissemination, while few of the programs have had any large-scale success. It has been suggested that a more commercial approach, as opposed to subsidized or freely distributed stoves, would achieve a higher level of success. However, a majority of the households that would benefit from an improved stove are poor and cannot afford the cost of the stove, especially if no monetary savings are possible from a more efficient fuel use, i.e., if the fuel used is collected biomass. The aim of this paper is to propose and evaluate a model that might overcome some of the barriers previous programs have experienced. The proposed model involves commercialization of collected fuels. The methods for evaluation include a qualitative assessment of the proposed model aided by the literature on improved cooking stove programs, fuel wood collection and fuel switching together with a quantitative simplistic model calculation of a hypothetical application of the proposed model principles, in order to assess its financial feasibility. The assessment indicates that the model would increase both households’ incentives and means to purchase and use improved cooking stoves. Furthermore, the model could possibly be partly financed based on carbon credits achieved from the reduction of greenhouse gas emissions.

Description: From rovers on the surface of Mars to Voyager 1 near the edge of the solar system, spacecraft regularly call home to Earth. For five decades, the Deep Space Network has been at the other end of the line.

Description: The newly named Nobelists kept alive work on gallium nitride until their successful innovations paved the way to practical devices.

Description: The discomforts of noise in working and living can be reduced only by a rational approach to acoustics problems when building houses and factories, writes the technical director of the Acoustics Laboratory at the Massachusetts Institute of Technology.

Description: Integrated circuits with nanomaterial components can revolutionize technology, but only if they can be economically fabricated in large numbers.

Description: The belt emerges as a fundamental climatic feature of atmospheric circulation patterns on a rotating and differentially heated planet. But locating its edges and discerning anthropogenic influences remain difficult research problems.

Description: By manipulating fluorescence, the three prizewinners brought the hidden machinery of living cells into view.

Description: Researchers maintain that excellence in science requires a long-term strategy, money, and closer interactions with the commercial sector.

Description: Nonnuclear states’ patience with weapons states’ inaction on disarmament is wearing thin.

Description: The expansion of the Department of Energy’s high-bandwidth linkage is a step toward a global network for the transfer of scientific information.

Description: A highly deformable elastic sphere may bounce poorly on land, but it will skip spectacularly on water.

Description: Solutal Marangoni instability (SMI) is investigated both in 2D and 3D using a combined Cahn-Hilliard and Navier-Stokes model in a finite system. Fe-Sn is chosen as a representative alloy system since the phase diagram reveals a region with a miscibility gap, where two liquid phases, namely, the Fe-rich phase L 1 and the Sn-rich phase L 2 , are in chemical equilibrium. In 3D, considering a perturbed liquid cylinder ( L 2 phase) with a length of λ and a radius of R 0 embedded in the middle of a simulation box of λ × H × H (length × width × height) surrounded by the phase L 1 , we find that the perturbation induced Marangoni flow is either clockwise or anti-clockwise depending on the mean curvature difference between the convex and concave regions which is affected by the ratio of λ/ R 0 . The critical ratio of λ/ R 0 for SMI is shown to be invariant for different Marangoni numbers as well as independent of the geometrical properties of the L 1 phase. In 2D, a perturbed liquid pipe with a length of λ and a radius of R 0 embedded in the middle of a simulation box of λ × H (length × height) is taken into account. Due to different curvature constitution, the critical ratio of λ/ R 0 for SMI depends on the height of the L 1 phase.

Description: For several years, a promising Plasma Synthetic Jet actuator for high-speed flow control has been under development at ONERA. So far, its confined geometry and small space-time scales at play have prevented its full experimental characterization. Complementary accurate numerical simulations are then considered in this study in order to provide a complete aerothermodynamic description of the actuator. Two major obstacles have to be overcome with this approach: the modeling of the energy deposited by the electric arc and the accurate computation of the transient response of the cavity generating the pulsed jet. To solve the first problem, an Euler solver coupled with an electric circuit model was used to evaluate the energy deposition in the cavity. Such a coupling is performed by considering the electric field between the two electrodes. The second issue was then addressed by injecting these source terms in large Eddy simulations of the entire actuator. Aerodynamic results were finally compared with Schlieren visualizations. Using the proposed methodology, the temporal evolution of the jet front is remarkably well predicted.

Description: This paper investigates the state of food security in Romania and its place in the world. We analysed the level of food security indicators for 1990–2012, in Romania, and their average levels worldwide. References are also made to developed and developing countries. The research seeks to answer the questions: Is food security achieved in Romania and, if so, what kind of structural changes can be made towards improving food quality and people’s living standards? As indicators show, the findings indicate that food security is ensured, on average, in Romania. Dietary energy supply is above dietary energy requirements, the ratio of cereals import dependency is below its average level worldwide, and the daily diet is balanced between vegetal and animal origin food. Having solved the quantitative aspect of food security, Romania can look towards improving the qualitative aspects of it. In this regard, organic food may be considered as a direction of developing sustainable agricultural economy.

Description: To achieve agricultural sustainability, basic land planning would allocate more areas for specific land uses with high ecosystem service values. However, this has always failed because of its low economic interest. Paying farmers would be effective for its implementation. To overcome previous studies’ limitation in spatial display, we developed a novel approach with a spatially explicit land use plan under payment policy. It integrates the tradeoff analysis into a traditional land use optimal allocation system. The land allocation system generates an origin land use scenario. Our method analyzes farmers’ tradeoffs in changing crops by adopting payment policy. Finally, the origin land use map is reallocated. The newly reclaimed region of Yili, China is studied as a representative area. Our tool established a tradeoff curve indicating the adoption proportion of farmers changing other land use types to clover, which is a specific crop with high ecosystem service values, at different payment prices. Areas adopting the payment policy were identified, and corresponding spatial distribution maps of land use re-allocation were generated for the tradeoff curve. Sensitivity analysis validated the robustness of our model. Results demonstrated that our method can provide more spatial and economic information for sustainable land use planning.

Description: Snapshot and classical proper orthogonal decomposition (POD) are used to examine the large-scale, energetic motions in fully developed turbulent pipe flow at Re D = 47,000 and 93,000. The snapshot POD modes come in pairs, representing the same azimuthal mode number but with a simple phase shift. The first 10 snapshot POD modes, associated with the very large scale motions (VLSMs), contribute 43% of the average Reynolds shear stress, and for first 80 modes u ′ and v ′ are anti-correlated so that they all contribute to positive shear stress events. The attached motions are contained in the lower order modes, and detached motions do not appear until snapshot POD mode numbers ≥15. We find that snapshot POD can introduce mode mixing, which is avoided in classical POD. Classical POD also gives frequency information, confirming that the low order modes capture well the behavior of the very large scale motions.

Description: We explore the instabilities developed in a fluid in which viscosity depends on temperature. In particular, we consider a dependency that models a very viscous (and thus rather rigid) lithosphere over a convecting mantle. To this end, we study a 2D convection problem in which viscosity depends on temperature by abruptly changing its value by a factor of 400 within a narrow temperature gap. We conduct a study which combines bifurcation analysis and time-dependent simulations. Solutions such as limit cycles are found that are fundamentally related to the presence of symmetry. Spontaneous plate-like behaviors that rapidly evolve towards a stagnant lid regime emerge sporadically through abrupt bursts during these cycles. The plate-like evolution alternates motions towards either the right or the left, thereby introducing temporary asymmetries on the convecting styles. Further time-dependent regimes with stagnant and plate-like lids are found and described.

Description: We study the shock wave structure in a rarefied polyatomic gas based on a simplified model of extended thermodynamics in which the dissipation is due only to the dynamic pressure. In this case the differential system is very simple because it is a variant of Euler system with a new scalar equation for the dynamic pressure [T. Arima, S. Taniguchi, T. Ruggeri, and M. Sugiyama, Phys. Lett. A376, 2799–2803 (2012)]. It is shown that this theory is able to describe the three types of the shock wave structure observed in experiments: the nearly symmetric shock wave structure (Type A, small Mach number), the asymmetric structure (Type B, moderate Mach number), and the structure composed of thin and thick layers (Type C, large Mach number).

Description: In this paper, the scaling property of the inverse energy cascade and forward enstrophy cascade of the vorticity filed ω( x , y ) in two-dimensional (2D) turbulence is analyzed. This is accomplished by applying a Hilbert-based technique, namely Hilbert-Huang transform, to a vorticity field obtained from a 8192 2 grid-points direct numerical simulation of the 2D turbulence with a forcing scale k f = 100 and an Ekman friction. The measured joint probability density function p ( C , k ) of mode C i ( x ) of the vorticity ω and instantaneous wavenumber k ( x ) is separated by the forcing scale k f into two parts, which correspond to the inverse energy cascade and the forward enstrophy cascade. It is found that all conditional probability density function p ( C | k ) at given wavenumber k has an exponential tail. In the inverse energy cascade, the shape of p ( C | k ) does collapse with each other, indicating a nonintermittent cascade. The measured scaling exponent ζ ω I ( q ) is linear with the statistical order q , i.e., ζ ω I ( q ) = − q / 3 , confirming the nonintermittent cascade process. In the forward enstrophy cascade, the core part of p ( C | k ) is changing with wavenumber k , indicating an intermittent forward cascade. The measured scaling exponent ζ ω F ( q ) is nonlinear with q and can be described very well by a log-Poisson fitting: ζ ω F ( q ) = 1 3 q + 0.45 1 − 0 . 43 q . However, the extracted vorticity scaling exponents ζ ω ( q ) for both inverse energy cascade and forward enstrophy cascade are not consistent with Kraichnan's theory prediction. New theory for the vorticity field in 2D turbulence is required to interpret the observed scaling behavior.

Description: Most previous studies on corporate sustainability (corporate social responsibility) practices tend to focus on external stakeholders and outcomes. However, the influence of CSR practices on employees remains largely unexplored. In this study, we examine the influence of CSR practices on employees’ attitudes and behaviors. We investigate the mediation effect of employees’ attitudes and behaviors on the relationship between CSR practices and organizational performance. The empirical results indicate that employees’ perceptions of CSR practices have a positive impact on their organizational commitment and organizational citizenship behavior. The organizational citizenship behavior partially mediates the relationship between CSR practices and organizational performance, whereas organizational commitment indirectly mediates the relationship only through organizational citizenship behavior. This study also raises some important implications based on the empirical results.

Description: We report experimental observations of the controlled deformation of a dielectric liquid jet subjected to a local high-voltage electrostatic field in the direction normal to the jet. The jet deforms to the shape of an elliptic cylinder upon application of a normal electrostatic field. As the applied electric field strength is increased, the elliptic cylindrical jet deforms permanently into a flat sheet, and eventually breaks-up into droplets. We interpret this observation—the stretch of the jet is in the normal direction to the applied electric field—qualitatively using the Taylor-Melcher leaky dielectric theory, and develop a simple scaling model that predicts the critical electric field strength for the jet-to-sheet transition. Our model shows a good agreement with experimental results, and has a form that is consistent with the classical drop deformation criterion in the Taylor-Melcher theory. Finally, we statistically analyze the resultant droplets from sheet breakup, and find that increasing the applied electric field strength improves droplet uniformity and reduces droplet size.

Description: Normal impingement of a single droplet on a thin liquid film is investigated numerically solving the axisymmetric Navier-Stokes equations. Gravity and viscosity are taken into account whereas compressibility effects are neglected. Two phases are tracked by means of volume of fluid method and adaptive mesh refinement is used to increase accuracy of the interface. Numerical results are validated both qualitatively and quantitatively using experimental measurements. Effects of gas density, gas viscosity, and film thickness on the crown behavior are studied. Influence of droplet deviation from spherical shape on the crown behavior is investigated. It is shown that increasing the gas density leads to reduction of crown radius evolution rate, while gas viscosity does not affect the rate of crown radius evolution. Development rate of crown height decreases by increasing the gas density. Reynolds number and splashing regime can change the effect of gas viscosity on the crown height evolution. Deviation of droplet from sphere can change behavior of crown completely as result of change in droplet mass center position. Difference between numerical results and experimental ones is justified using different droplet shapes.

Description: We present an analytical study of peak mode isotachophoresis (ITP), and provide closed form solutions for sample distribution and electric field, as well as for leading-, trailing-, and counter-ion concentration profiles. Importantly, the solution we present is valid not only for the case of fully ionized species, but also for systems of weak electrolytes which better represent real buffer systems and for multivalent analytes such as proteins and DNA. The model reveals two major scales which govern the electric field and buffer distributions, and an additional length scale governing analyte distribution. Using well-controlled experiments, and numerical simulations, we verify and validate the model and highlight its key merits as well as its limitations. We demonstrate the use of the model for determining the peak concentration of focused sample based on known buffer and analyte properties, and show it differs significantly from commonly used approximations based on the interface width alone. We further apply our model for studying reactions between multiple species having different effective mobilities yet co-focused at a single ITP interface. We find a closed form expression for an effective-on rate which depends on reactants distributions, and derive the conditions for optimizing such reactions. Interestingly, the model reveals that maximum reaction rate is not necessarily obtained when the concentration profiles of the reacting species perfectly overlap. In addition to the exact solutions, we derive throughout several closed form engineering approximations which are based on elementary functions and are simple to implement, yet maintain the interplay between the important scales. Both the exact and approximate solutions provide insight into sample focusing and can be used to design and optimize ITP-based assays.

Description: A novel waveform modified from the standard-sinusoidal function is adopted to enhance the virtual aeroshaping effect of the synthetic jets positioned at the front stagnation point of a circular cylinder. The waveform is characterized by a control parameter, namely, the suction duty cycle factor k , which is the ratio of the time duration of the suction cycle to that of the blowing cycle. The strength of the synthetic jet vortex pair is enhanced by increasing the suction duty cycle factor. The periodic closed envelope forms upstream of the circular cylinder for k ≤ 1.00, while the quasi-steady open envelope forms for k ≥ 2.00, acting the virtual aeroshaping effect. As a result, both the statistical characteristics and the vortex dynamics of the near-wake flow field change with the suction duty cycle factor. The recirculation region downstream of the circular cylinder becomes smaller or even disappears, and thus, the drag coefficient over the circular cylinder is reduced by increasing the suction duty cycle factor to k ≥ 1.00. The statistical mean and fluctuating velocities show corresponding changes in the near wake with the different wake patterns. For k ≤ 0.50, the wake vortex shows the antisymmetric shedding mode which is similar with the natural case. For 1.00 ≤ k ≤ 2.00, the wake vortex shows the bistable state mode, where vortex sheds with symmetric or antisymmetric mode; the antisymmetric shedding mode dominates the global flow field for k = 1.00, while it is the symmetric shedding mode that dominates the flow field for k = 2.00. For k = 4.00, it shows the antisymmetric shedding mode with a shorter vortex formation length than the natural case. The above findings indicate that the virtual aeroshaping effect of the synthetic jets can be enhanced by increasing the suction duty cycle factor so as to increase the momentum coefficient while keeping other control parameters unchanged, providing us another way for effective flow control.

Description: The dynamics of vapor-liquid interface are important because interfacial instability determines bubble growth, detachment frequency, waiting time, shape of bubbles, and the interrelationship between bubble formation sites. In this study, a detailed numerical simulation has been performed to understand the transition in bubble release pattern and multimode bubble formation in saturated pool boiling. The interfaces drop down alternatively at the nodes and antinodes of the wavelengths dictated by Rayleigh-Taylor instability and Taylor-Helmholtz instability. Due to higher degrees of superheat, vapor jets emanate from nodes and antinodes. An attempt has been made to predict the maximum and minimum heat fluxes during saturated pool boiling.

Description: We present a combination of experiment, theory, and modelling on laminar mixing at large Péclet number. The flow is produced by oscillating electromagnetic forces in a thin electrolytic fluid layer, leading to oscillating dipoles, quadrupoles, octopoles, and disordered flows. The numerical simulations are based on the Diffusive Strip Method (DSM) which was recently introduced (P. Meunier and E. Villermaux, “The diffusive strip method for scalar mixing in two-dimensions,” J. Fluid Mech.662, 134–172 (2010)) to solve the advection-diffusion problem by combining Lagrangian techniques and theoretical modelling of the diffusion. Numerical simulations obtained with the DSM are in reasonable agreement with quantitative dye visualization experiments of the scalar fields. A theoretical model based on log-normal Probability Density Functions (PDFs) of stretching factors, characteristic of homogeneous turbulence in the Batchelor regime, allows to predict the PDFs of scalar in agreement with numerical and experimental results. This model also indicates that the PDFs of scalar are asymptotically close to log-normal at late stages, except for the large concentration levels which correspond to low stretching factors.

Description: Janus droplets are compound droplets that consist of two adhering drops of different fluids that are suspended in a third fluid. We use the Shan-Chen lattice Boltzmann method for multicomponent mixtures to simulate Janus droplets at rest and in shear. In this simulation model, interfacial tensions are not known a priori from the model parameters and must be determined using numerical experiments. We show that interfacial tensions obtained with the Young-Laplace law are consistent with those measured from the equilibrium geometry. The regimes of adhering, separated, and engulfing droplets were explored. Two different adhesion geometries were considered for two-dimensional simulations of Janus droplets in shear. The first geometry resembles two adhering circles with small overlap. In the second geometry, the two halves are semicircular. For both geometries, the rotation rate of the droplet depends on its orientation. The width of the periodic simulation domain also affects the rotation rate of both droplet types up to an aspect ratio of 6:1 (width:height). While the droplets with the first geometry oscillated about the middle of the domain, the droplets of the second geometry did not translate while rotating. A four-pole vortex structure inside droplets of the second geometry was found. These simulations of single Janus droplets reveal complex behaviour that implies a rich range of possibilities for the rheology of Janus emulsions.

Description: Understanding the physics of water evaporation from saline porous media is important in many natural and engineering applications such as durability of building materials and preservation of monuments, water quality, and mineral-fluid interactions. We applied synchrotron x-ray micro-tomography to investigate the pore-scale dynamics of dissolved salt distribution in a three dimensional drying saline porous media using a cylindrical plastic column (15 mm in height and 8 mm in diameter) packed with sand particles saturated with CaI 2 solution (5% concentration by mass) with a spatial and temporal resolution of 12 μ m and 30 min, respectively. Every time the drying sand column was set to be imaged, two different images were recorded using distinct synchrotron x-rays energies immediately above and below the K-edge value of Iodine. Taking the difference between pixel gray values enabled us to delineate the spatial and temporal distribution of CaI 2 concentration at pore scale. Results indicate that during early stages of evaporation, air preferentially invades large pores at the surface while finer pores remain saturated and connected to the wet zone at bottom via capillary-induced liquid flow acting as evaporating spots. Consequently, the salt concentration increases preferentially in finer pores where evaporation occurs. Higher salt concentration was observed close to the evaporating surface indicating a convection-driven process. The obtained salt profiles were used to evaluate the numerical solution of the convection-diffusion equation (CDE). Results show that the macro-scale CDE could capture the overall trend of the measured salt profiles but fail to produce the exact slope of the profiles. Our results shed new insight on the physics of salt transport and its complex dynamics in drying porous media and establish synchrotron x-ray tomography as an effective tool to investigate the dynamics of salt transport in porous media at high spatial and temporal resolution.

Description: The behaviour of low Reynolds number, non-Boussinesq fountains from four different nozzle geometries (one circular and three rectangular nozzles) are studied. High speed laser schlieren imaging is used to study the fountain behaviour (frequency and penetration height). Bi-orthogonal decomposition and dynamic mode decomposition (DMD) are used to understand the unsteady characteristics of fountains. The flow regimes of fountains are classified as steady, flapping, and flapping-bobbing type. The DMD technique successfully separates the bobbing oscillation from the combined flapping-bobbing oscillation of the fountain. The frequency of the flapping oscillation, and the frequency of the bobbing oscillation in the flapping-bobbing regime scales as St h Fr h = C 1 and S t h F r h 2 = C 2 , respectively, where the characteristic length scale is the smallest dimension ( h ) of the nozzle. The mean steady state penetration heights ( Z s / h ) of “forced” low Reynolds number non-Boussinesq fountains are independent of nozzle shape (circular and rectangular), and scales linearly with the Froude number.

Description: The large-scale properties of self-similar unstably stratified homogeneous (USH) turbulence are investigated using an eddy-damped quasi-normal markovianized approximation of the nonlinear term. This analysis shows that a special role is played by the wave vectors contained in the equatorial plane, i.e., the plane perpendicular to gravity. It is indeed in this plane that turbulent spectra reach their maxima and evolve linearly from their initial condition when their initial infrared exponent is smaller than 4. At other angles, this property is not satisfied and turbulent spectra eventually undergo an evolution dominated by nonlinear backscattering processes. The self-similar evolution of USH turbulence is also shown to be related to the properties of large scales. In particular, the asymptotic growth rate of the mixing length depends on the initial infrared exponent in the equatorial plane. Besides, the self-similar asymptotic values of the concentration and velocity correlations also depend on the properties of large scales. This allows to derive relations between the correlations and the growth rate parameter.

Description: A consensus is forming among experts that the best way to achieve emissions’ reduction in the near and mid-term is increasing the demand-side energy efficiency—this is especially true in developing countries where the potential for demand reduction is significant and achievable at relatively lower cost. Enhanced energy efficiency also reduces energy costs and can result in a financial benefit to end-users, if the life-cycle value of energy savings offsets the upfront cost of implementing the measure. At the same time, reducing energy demand translates into lower pull for fossil fuel import and supply/distribution capacity expansion. An ideal candidate for the implementation of demand-side energy efficiency measures is the building sector, since it contributes to a large extent to the total amount of greenhouse gases (GHGs) emitted worldwide. In most developing countries, the contribution of the building sector to the total national GHG emissions is significantly higher than the worldwide average. This is in part due to the lower level of industrial activity. Other drivers of the high emissions of the building sector are the inefficiency of the envelope and technical systems of the existing buildings, as well as harsh climatic conditions requiring the use of energy intensive air-conditioning equipment. The United Arab Emirates (UAE) currently have the highest ecological footprint per capita in the world. The Emirate of Abu Dhabi, the focus of this study, can be expected to have a footprint that is even higher, being the largest economy and the major oil producer among the seven Emirates. In addition to the environmental consequences of unrestrained energy consumption, the fact that energy prices are heavily subsidized in Abu Dhabi results in a significant financial burden for the government. In the UAE and the Emirate of Abu Dhabi, the air-conditioning load in buildings is the ideal target for demand-side management because it constitutes more than 60% of the total energy consumption. However, many sources of uncertainty still remain. How should we assess the life-cycle cost/benefit of candidate demand-side interventions? Which ones to choose in order to maximize national utility? This study will start to answer those questions by using a detailed engineering model of a typical Abu Dhabi building as specified by the Emirate’s Urban Planning Council. Using the model building as a baseline, we then proceed to evaluate the energy impact of different retrofits through numerical simulation. We present a novel Marginal Abatement Cost Curve (MACC) for the Emirate of Abu Dhabi focusing exclusively on demand-side measures having an impact on the air-conditioning load. A surprising number of the abatement levers analyzed in this study exhibit a positive net present value (NPV), if the cost-reflective price of electricity is used for the life-cycle assessment.

Description: Secondary flow cells are commonly observed in straight laboratory channels, where they are often associated with duct corners. Here, we present velocity measurements acquired with an acoustic Doppler current profiler in a straight reach of the Seine river (France). We show that a remarkably regular series of stationary flow cells spans across the entire channel. They are arranged in pairs of counter-rotating vortices aligned with the primary flow. Their existence away from the river banks contradicts the usual interpretation of these secondary flow structures, which invokes the influence of boundaries. Based on these measurements, we use a depth-averaged model to evaluate the momentum transfer by these structures, and find that it is comparable with the classical turbulent transfer.

Description: Analysis of fluxes across the turbulent/non-turbulent interface (TNTI) of turbulent boundary layers is performed using data from two-dimensional particle image velocimetry (PIV) obtained at high Reynolds numbers. The interface is identified with an iso-surface of kinetic energy, and the rate of change of total kinetic energy ( K ) inside a control volume with the TNTI as a bounding surface is investigated. Features of the growth of the turbulent region into the non-turbulent region by molecular diffusion of K , viscous nibbling, are examined in detail, focussing on correlations between interface orientation, viscous stress tensor elements, and local fluid velocity. At the level of the ensemble (Reynolds) averaged Navier-Stokes equations (RANS), the total kinetic energy K is shown to evolve predominantly due to the turbulent advective fluxes occurring through an average surface which differs considerably from the local, corrugated, sharp interface. The analysis is generalized to a hierarchy of length-scales by spatial filtering of the data as used commonly in Large-Eddy-Simulation (LES) analysis. For the same overall entrainment rate of total kinetic energy, the theoretical analysis shows that the sum of resolved viscous and subgrid-scale advective flux must be independent of scale. Within the experimental limitations of the PIV data, the results agree with these trends, namely that as the filter scale increases, the viscous resolved fluxes decrease while the subgrid-scale advective fluxes increase and tend towards the RANS values at large filter sizes. However, a definitive conclusion can only be made with fully resolved three-dimensional data, over and beyond the large dynamic spatial range presented here. The qualitative trends from the measurement results provide evidence that large-scale transport due to the energy-containing eddies determines the overall rate of entrainment, while viscous effects at the smallest scales provide the physical mechanism ultimately responsible for entrainment. Data spanning over a decade in Reynolds number suggest that the fluxes (or the entrainment velocity) scale with the friction velocity (or equivalently the local turbulent fluctuating velocity), whereas Taylor microscale and boundary-layer thickness are the appropriate length scales at small and large filter sizes, respectively.

Description: In a recent direct numerical simulation (DNS) study [P. K. Yeung and K. R. Sreenivasan, “ Spectrum of passive scalars of high molecular diffusivity in turbulent mixing,” J. Fluid Mech.716, R14 (2013)] with Schmidt number as low as 1/2048, we verified the essential physical content of the theory of Batchelor, Howells, and Townsend [“Small-scale variation of convected quantities like temperature in turbulent fluid. 2. The case of large conductivity,” J. Fluid Mech.5, 134 (1959)] for turbulent passive scalar fields with very strong diffusivity, decaying in the absence of any production mechanism. In particular, we confirmed the existence of the −17/3 power of the scalar spectral density in the so-called inertial-diffusive range. In the present paper, we consider the DNS of the same problem, but in the presence of a uniform mean gradient, which leads to the production of scalar fluctuations at (primarily) the large scales. For the parameters of the simulations, the presence of the mean gradient alters the physics of mixing fundamentally at low Peclet numbers. While the spectrum still follows a −17/3 power law in the inertial-diffusive range, the pre-factor is non-universal and depends on the magnitude of the mean scalar gradient. Spectral transfer is greatly reduced in comparison with those for moderately and weakly diffusive scalars, leading to several distinctive features such as the absence of dissipative anomaly and a new balance of terms in the spectral transfer equation for the scalar variance, differing from the case of zero gradient. We use the DNS results to present an alternative explanation for the observed scaling behavior, and discuss a few spectral characteristics in detail.

Description: “Make cities more sustainable” is an omnipresent slogan in architecture and urban planning. This article is a discussion on theoretical and practical boundaries of using the expression “sustainability” with respect to the scientific community, therefore avoiding sustainability becoming a euphemism for “doing good”. By definition, it can be concluded, cities developed as counterparts to the hinterland and, therefore, they axiomatically should be and are as a matter of fact unsustainable. Furthermore, sustainability is a binary, not a gradual concept. Something is either sustainable or not. Aiming to increase the sustainability is consequently a sham battle. It would be necessary to change our perception to acknowledge that cities should be unsustainable in order to become efficient, seen from a global perspective including the hinterland.

Description: The impacts of environmental change and degradation on human populations, including the possibility of sharp increases in the number of people considered “environmental migrants” have gained considerable attention. Migrating communities may try to distribute their members along particular lines of kinship, gender, marriage and/or services linked to land exploitation and agriculture. This paper explores archives and narratives of African migrants in northwestern Benin and northeastern Ghana. These regions have been marked by severe ecological change and resource deterioration over the years, as well as changes in marital patterns, family relations and customary practices. In the case of Benin, the paper looks at different ethnic groups that migrated from neighboring countries to the study region. It then focuses on the Biali, who undertake marriage journeys after practicing rituals, which are often related to agricultural activities. The Frafra (Ghana), who, in their bid to out-migrate as a livelihood/coping strategy in the advent of environmental deterioration and rainfall variability, are confronted with high bride prices, changing family relations and customary practices. The paper concludes by highlighting socio-cultural changes that ensue in the face of outmigration among different ethnic groups, especially the Biali and Frafra, and the relationship between non-environmental and environmental factors, and mobility strategies.

Description: A non-equilibrium wall-model based on unsteady 3D Reynolds-averaged Navier-Stokes (RANS) equations has been implemented in an unstructured mesh environment. The method is similar to that of the wall-model for structured mesh described by Wang and Moin [Phys. Fluids14, 2043–2051 (2002)], but is supplemented by a new dynamic eddy viscosity/conductivity model that corrects the effect of the resolved Reynolds stress (resolved turbulent heat flux) on the skin friction (wall heat flux). This correction is crucial in predicting the correct level of the skin friction. Unlike earlier models, this eddy viscosity/conductivity model does not have a stress-matching procedure or a tunable free parameter, and it shows consistent performance over a wide range of Reynolds numbers. The wall-model is validated against canonical (attached) transitional and fully turbulent flows at moderate to very high Reynolds numbers: a turbulent channel flow at Re τ = 2000, an H-type transitional boundary layer up to Re θ = 3300, and a high Reynolds number boundary layer at Re θ = 31 000. Application to a separated flow over a NACA4412 airfoil operating close to maximum lift is also considered to test the performance of the wall-model in complex non-equilibrium flows.

Description: Conventional shallow water theory successfully reproduces many key features of the Jovian atmosphere: a mixture of coherent vortices and stable, large-scale, zonal jets whose amplitude decreases with distance from the equator. However, both freely decaying and forced-dissipative simulations of the shallow water equations in Jovian parameter regimes invariably yield retrograde equatorial jets, while Jupiter itself has a strong prograde equatorial jet. Simulations by Scott and Polvani [“Equatorial superrotation in shallow atmospheres,” Geophys. Res. Lett.35, L24202 (2008)] have produced prograde equatorial jets through the addition of a model for radiative relaxation in the shallow water height equation. However, their model does not conserve mass or momentum in the active layer, and produces mid-latitude jets much weaker than the equatorial jet. We present the thermal shallow water equations as an alternative model for Jovian atmospheres. These equations permit horizontal variations in the thermodynamic properties of the fluid within the active layer. We incorporate a radiative relaxation term in the separate temperature equation, leaving the mass and momentum conservation equations untouched. Simulations of this model in the Jovian regime yield a strong prograde equatorial jet, and larger amplitude mid-latitude jets than the Scott and Polvani model. For both models, the slope of the non-zonal energy spectra is consistent with the classic Kolmogorov scaling, and the slope of the zonal energy spectra is consistent with the much steeper spectrum observed for Jupiter. We also perform simulations of the thermal shallow water equations for Neptunian parameter values, with a radiative relaxation time scale calculated for the same 25 mbar pressure level we used for Jupiter. These Neptunian simulations reproduce the broad, retrograde equatorial jet and prograde mid-latitude jets seen in observations. The much longer radiative time scale for the colder planet Neptune explains the transition from a prograde to a retrograde equatorial jet, while the broader jets are due to the deformation radius being a larger fraction of the planetary radius.

Description: The hydrodynamic interaction of two deformable vesicles in shear flow induces a net displacement, in most cases an increase of their distance in the transverse direction. The statistical average of these interactions leads to shear-induced diffusion in the suspension, both at the level of individual particles which experience a random walk made of successive interactions, and at the level of suspension where a nonlinear down-gradient diffusion takes place, an important ingredient in the structuring of suspension flows. We make an experimental and computational study of the interaction of a pair of lipid vesicles in shear flow by varying physical parameters, and investigate the decay of the net lateral displacement with the distance between the streamlines on which the vesicles are initially located. This decay and its dependency upon vesicle properties can be accounted for by a simple model based on the well established law for the lateral drift of a vesicle in the vicinity of a wall. In the semi-dilute regime, a determination of self-diffusion coefficients is presented.