ALBERT

Description: This paper develops a simplified continuum (continuous with respect to time, stress, etc.) fatigue damage model for use in critical design, Life Extending Control and fault prognosis. The work is based on the local strain cyclic damage modeling method. New nonlinear explicit equation forms of cyclic damage in terms of stress amplitude are derived to facilitate the continuum modelling. Stress based continuum models are derived. Extension to plastic strain-strain rate models is also presented. Progress toward a non-zero mean stress based is presented. Also new nonlinear explicit equation forms in terms of stress amplitude are derived for this case. Application of the various models to design, control, and fault prognosis is considered.

Description: Ground-based solar observational programs are discussed. The Birmingham (U.K.) solar oscillation network (BiSON) program, the Crimean (Ukraine) low degree program, the Stanford (California) low degree program, the Tenerife (Spain) group program, the South Pole program, the Mount Wilson (California) program, the international research on the interior of the sun (IRIS) network program, the high-l helioseismometer instrument, the ground luminosity oscillations imager (LOI) program, and the Taiwanese oscillation network (TON) program, are outlined.

Description: The UBV variability of classical T Tauri stars is investigated using a large data set compiled by Herbst et al. (1994). The analysis is based on the covariance of the UBV colors, which is independent of the obscuration and the temporal sampling, and is a powerful tool for finding trends that otherwise would be hidden in the complex time-dependence of the data. I find that there are two types of UBV variability and introduce the nomenclature 'ortho-' and 'para-UBV' variations, or in short 'type-O' and 'type-P' variations. Objects with a predominance of ortho-UBV variability show strong variability in both the Balmer and Paschen continua, whereas objects dominated by para-UBV changes vary mostly in the Paschen continuum. I show that type-O variations can be explained in terms of rotating spots, variable obscuration, or changes intrinsic to the source that obey the law Delta T(sub S)/T(sub S) varies as Delta n(sub H)/n(sub H), where T(sub S) and n(sub H) are, respectively, the gas temperature and the number density of hydrogen nuclei. Type-P variations can be explained only by changes intrinsic to the source with Delta T(sub S)/T(sub S) varies as - Delta n(sub H)/n(sub H), and I speculate on a possible origin for these changes. The covariance ellipse of the UBV colors is a versatile tool for studying the connection between variability and other spectral signatures of classical T Tauri stars; its use for this purpose is illustrated by studying the correlation between the presence of CO first-overtone bands in emission and the type of variability. I find that objects with CO band emission are also those with type-P variability and propose an observational test to validate this conclusion.

Description: We present the results of a first attempt to employ multiaperture masks to obtain spectrophotometry of H II regions in nearby galaxies. A total of 97 H II regions in six southern spiral galaxies were observed using a combination of multiaperture masks and conventional long-slit spectrophotometry. The oxygen abundances derived from the multiaperture mask observations using the empirical abundance diagnostic R(sub 23) are shown to be consistent with those from long-slit spectra and generally show better reproducibility and object definition. Although the number of objects that can be observed simultaneously with this particular system is still quite limited compared with either imaging spectrophotometry or fiber-fed spectrographs, the spectral resolution offered and high throughput in the blue help make multiaperture spectrophotometry a competitive technique for increasing the sampling of H II regions in both radial distance and luminosity. There is still no clear trend of abundance gradient with either the galaxy's luminosity or its Hubble type, although the extrapolated central abundance does appear to correlate with galaxy luminosity/mass. In order to avoid difficulty in choosing an appropriate normalizing radius, we instead plot the oxygen abundance against the underlying I-band surface brightness at the radial distance of the H II region and confirm the existence of a local metallicity-surface brightness reltaionship within the disks of spiral galaxies. Although the simple closed-boc model of galaxy evolution predicts almost the right form of this relationship, a more realistic multizone model employing expnentially decreasing gas infall provides a more satisfactory fit to the observational data, provided the expected enriched gas return from dying low-mass stars shedding their envelopes at late epochs is properly taken into account. This same model, with a star formation law based upon self-regulating star formation in a three-dimensional disk (Dopita & Ryder 1994), is equally capable of accounting for the observed relationship between recent massive star formation and stellar surface brightness (Ryder & Dopita 1994).

Description: We report new high-resolution near-infrared imaging observations of the planetary nebula J900, in broadband J, H, and K, and narrowband 2.122 micrometers (for H2 1-0 S(1)), Brackett-gamma, and continuum filters. The H2 images reveal a remarkable set of outward-extending features not detected in any previous observations of theis object. In the northwest lobe of the inner bipolar region, the H2 emission, Brackett-gamma emission, and underlying continuum are spatially resolved. The relative positions of the peaks of the line emission suggest an ionization front seen edge-on. The continuum emission, apparently located nearer to the central star, is likely due to transiently heated small dust grains. The extended H2 emission features are probably excited either by oblique shocks caused by material ejected from the nebula, or by radiation leaking from holes in the opacity surrounding the ionized shell.

Description: Recent ROSAT Position Sensitive Proportional Counter (PSPC) observations for the first time unequivocally reveal the presence of a compact source of hard X-ray emission centered on the peculiar star eta Car. These observations also show a dramatic change in the hard-band (E greater than 1.6 keV) counting rate by about a factor of 2 in a 4 month interval. Thus, strong variability, which is a characteristic of eta Car in radio through IR and visible-band wavelengths, is also observed at X-ray energies. The increase in hard X-ray emission could be the result of a tripling of the mass-loss rate in less than 4 months.

Description: Using data extracted from the ROSAT archive we have discovered a recurrent supersoft X-ray transient RX J0045.4+4154 in M31. The first outburst began on 1992 February 2 and continued for at least 4 days, until the end of the observation sequence. A second outburst that lasted more than 6 days was seen to begin on 1993 January 7. The X-ray spectrum on both occasions yields a characteristic blackbody temperature of approximately 90 eV. For a range of plausible continuum models, the hydrogen column density is (0.8-1.5) x 10(exp 21)/sq cm and is consistent with the source being located in M31. This implies an unabsorbed 0.1-2.0 keV peak luminosity of approximately 10(exp 38) ergs/sec. This is the first recurrent X-ray transient to be found in M31 and is particularly notable because it is much softer than the bright X-ray transients seen in our Galaxy. The spectrum is characteristic of the supersoft class of X-ray sources, which are thought to be accreting white dwarfs that have a hydrogen-burning surface layer. A fit to a white dwarf model atmosphere gives a temperature of 10(exp 6)K, the hottest found so far. This high temperature is consistent with a white dwarf mass of 1.3-1.4 solar mass, approaching the Chandrasekhar limit, and burning close to the nuclear stability limit.

Description: The life of 18th century astronomer, craftsman, and partriot David Rittenhouse is detailed. As a craftsman, he distinguished himself as one of the foremost builders of clocks. He also built magnetic compasses and surveying instruments. The finest examples of his craftsmanship are considered two orreries, mechanical solar systems. In terms of astronomical observations, his best-known contribution was his observation of the transit of Venus in 1769. Rittenhouse constructed the first diffraction grating. Working as Treasurer of Pennsylvania throughout the Revolution, he became the first director of the Mint in 1792. Astronomical observations in later life included charting the position of Uranus after its discovery.

Description: Using high-resolution spectroscopic data taken with the Goddard High Resolution Spectrographic (GHRS) aboard the Hubble Space Telescope (HST) and with the International Ultraviolet Expolorer (IUE) satellite, we compare the profiles of the Mg II h and k lines seen in stars with spectral types ranging from early K through mid-M and luminosities from giants to supergiants. For all of these stars the lines are broad emission features with a central absorption. When plotted on a velocity scale the absorption features of the h and k lines agree very well in both shape and position, as do the blue wings of the emission component. The red wings of the emission, however, show a pronounced difference, with the k line wing consistently shifted to the red of the h line wing. At present the reason for this discrepancy is unknown, but we suggest several possibilities, including radiative transfer effects and high-speed stellar winds.

Description: The X-ray observatory Advanced Satellite for Cosmology and Astrophysics (ASCA) (Astro-D) was launched in Feb 1993 and is now providing excellent spectro-imaging observations of objects from virtually every astronomical class. This paper reviews the scientific capabilities of ASCA using some of the first results from X-ray binaries, cataclysmic variables, and stars.

Description: A close examination of the 0.7- to 23-micron infrared data base acquired by Gehrz and Ney (1992), suggests that the nucleus of Comet P/Halley 1986 III emitted a burst of small dust grains during a 3-day period commencing within hours of perihelion passage on 1986 February 9.46 UT. The outburst was characterized by significant increases in the coma's grain color temperature T(sub obs), temperature excess (superheat: S = T(sub obs)/T(sub BB)), infrared luminosity, albedo, and 10-micron silicate emission feature strength. These changes are all consistent with the sudden ejection from the nucleus of a cloud of grains with radii of approximately 0.5 micron. This outburst may have produced the dust that was responsible for some of the tail streamers photographed on 1986 February 22 UT. The peak of the dust outburst occurred about 3 days before a pronounced increase in the water production rate measured by the Pioneer Venus Orbiter Ultraviolet Spectrometer. We suggest that jets that release large quantities of small particles may be largely responsible for some of the variable infrared behavior that has been reported for P/Halley and other comets during the past two decades. Such jets may also account for some of the differences IR Type I and IR Type II comets.

Description: The age relations between 36 impact craters with dark paraboloids and other geologic units and structures at these localities have been studied through photogeologic analysis of Magellan SAR images of the surface of Venus. Geologic settings in all 36 sites, about 1000 x 1000 km each, could be characterized using only 10 different terrain units and six types of structures. Mapping of such units and structures in 36 randomly distributed large regions shows evidence for a distinctive regional and global stratigraphic and geologic sequence. On the basis of this sequence we have developed a model that illustrates several major themes in the history of Venus. Most of the history of Venus (that of its first 80% or so) is not preserved in the surface geomorphological record. The major deformation associated with tessera formation in the period sometime between 0.5-1.0 b.y. ago (Ivanov and Basilevsky, 1993) is the earliest event detected. Our stratigraphic analyses suggest that following tessera formation, extensive volcanic flooding resurfaced at least 85% of the planet in the form of the presently-ridged and fractured plains. Several lines of evidence favor a high flux in the post-tessera period but we have no independent evidence for the absolute duration of ridged plains emplacement. During this time, the net state of stress in the lithosphere apparently changed from extensional to compressional, first in the form of extensive ridge belt development, followed by the formation of extensive wrinkle ridges on the flow units. Subsequently, there occurred local emplacement of smooth and lobate plains units which are presently essentially undeformed. The major events in the latest 10% of the presently preserved history of Venus are continued rifting and some associated volcanism, and the redistribution of eolian material largely derived from impact crater deposits. Detailed geologic mapping and stratigraphic synthesis are necessary to test this sequence and to address many of the outstanding problems raised by this analysis.

Description: We obtained the first high-dispersion IUE spectrum, and an additional low-dispersion spectrum of the very young planetary nebula He 3-1357 and its central star SDAO 244567. In 1988, it showed a very strong C IV lambda-1549 P Cygni profile which diminished and has disappeared by 1994, but C IV absorptions are seen in a high-resolution spectrum. The electron density from the C III F(lambda 1907)/F(lambda 1909) emission ratio is log N(sub e) = 4.1/cc. The older IUE data were reprocessed, and emission-line fluxes vary greatly for the period 1988-1994. The high-dispersion data show a rich Fe V and Fe VI absorption spectrum.

Description: We have observed seven narrow-linedd Seyfert 1 (NLS1) galaxies and one high-ionization Seyfert 2 galaxy with the Very Large Array (VLA). Combining these observations with published data, we summarize the radio properties of the NLS1 galaxies for which spectropolarimetry was reported by Goodrich. Fifteen of these 17 objects now have published radio observations of high sensitivity, and only nine of those have been detected. For a Hubble parameter of 75 km/s/Mpc, the 6 cm radio powers range from 10(exp 20) to 10(exp 23) W/Hz, within the range previously found for other types of Seyfert galaxy. The median radio size of the nine VLA-detected galaxies is no larger than 300 pc, similar to the median size found by Ulvestad & Wilson for a distance-limited sample of Seyfert galaxies. Of the six NLS1 galaxies known to have significant intrinsic optical polarization, three have measurable radio axes. Two of those three galaxies have radio major axes close to 90 deg from their polarization position angles, while the third has an inner radio axis that may be nearly parallel to the polarization position angle. The former relationship is expected for a Seyfert 1 in a unified model of Seyfert galaxies, assuming no intrinsic continuum polarization.

Description: We have performed multiband photopolarimetry toward stars behind the molecular cloud L1457 (MBM 12). This cloud is the nearest known molecular cloud (65 pc) and thought to be contained within the local 'hot bubble.' The polarization shows a regular structure, indicating that the cloud is threaded by an ordered magnetic field. The wavelength dependence of the polarization seems to indicate that the grains in L1457 have higher indices of refraction than normal for interstellar clouds. However, the wavelength of maximum polarization indicates that their size distribution is close to normal.

Description: Using Viking Orbiter images, detailed photoclinometric profiles were obtained across 10 irregular depressions, 32 fretted fractures, 40 troughs and pits, 124 solitary scarps, and 370 simple grabens in the north Tharsis region of Mars. These data allow inferences to be made on the shallow crustal structure of this region. The frequency modes of measured scarp heights correspond with previous general thickness estimates of the heavily cratered and rigded plains units. The depths of the flat-floored irregular depressions (55-175 m), fretted fractures (85-890 m), and troughs and pits (60-1620 m) are also similar to scarp heights (thicknesses) of the geologic units in which these depressions occur, which suggests that the depths of these flat-floored features were controlled by erosional base levels created by lithologic contacts. Although the features have a similar age, both their depths and their observed local structural control increase in the order listed above, which suggests that the more advanced stages of associated fracturing facilitated the development of these depressions by increasing permeability. If a ground-ice zone is a factor in development of these features, as has been suggested, our observation that the depths of these features decrease with increasing latitude suggests that either the thickness of the ground-ice zone does not increase poleward or the depths of the depressions were controlled by the top of the ground-ice zone whose depth may decrease with latitude.

Description: We report the detection of a broad absorption feature near 2166/cm in the spectrum of the Taurus cloud cource Elias 18. This pre-main-sequence source is the second in Taurus, the third in our survey, and the fifth known in the sky to show the broad 2166/cm absorption feature. Of equal importance, this feature is not seen toward several other embedded sources in our survey, nor is it seen toward the source Elias 16, located behind the Taurus cloud. Laboratory experiments with interstellar ice analogs show that such a feature is associated with a complex C triple bonded to N containing compound (called X(C triple bonded to N)) that results from high-energy processing (ultraviolet irradiation or ion bombardment) of simple ice components into more complex, organic components. We find a nonlinear anticorrelation between the abundance of X(C triple bonded to N) and frozen CO components in nonpolar lattices. We find no correlation between the abundance of X(C triple bonded to N) and frozen CO in polar lattices. Because the abundances of frozen CO and H2O are strongly correlated with each other and with visual extinction toward sources embedded in and located behind the Taurus molecular cloud, these ice components usually are associated with intracloud material. Our results indicate that X(C triple bonded to N) molecules result from chemical processing of dust grains dominated by nonpolar icy mantles in the local environments of pre-main-sequence stars. Such processing of icy grains in the early solar system may be an important source of organic compounds observed in minor solar system bodies. The delivery of these organic compounds to the surface of the primitive Earth through comet impacts may have provided the raw materials for prebiotic chemistry.

Description: Theoretical electron density sensitive emission-line ratios, determined using electron impact excitation rates calculated with the R-matrix code, are presented for R = I(2s(sup 2) (1)S-2s2p 3P(sub 2))/I(2s(sup 2) (1)S-2s2p 3P(sub 1) = 1(1483 A)/I(1486 A) in N IV. These are found to be up to an order of magnitude different from those deduced by previous authors, principally due to the inclusion of excitation rates for transitions among the 2s2p (3)p fine-structure levels. The observed values of R for several planetary nebulae, symbiotic stars and the Cygnus Loop supernova remnant, measured from spectra obtained with the International Ultraviolet Explorer (IUE) satellite and the Hopkins Ultraviolet Explorer (HUT), lead to electron densities which are in excellent agreement with those deduced from line ratios in other species. This provides observational support for the accuracy of the atomic data adopted in the present calculations.

Description: The Advanced Satellite for Cosmology and Astrophysics (ASCA) instrument uses identical conical foil X-ray mirrors for its four telescopes. One of the major advantages of ASCA's telescopes is the first time ever use of X-ray imaging over a broad energy band and high throughput for conducting astronomical spectroscopy. Nested thin foil reflectors make possible a large effective area up to 10 keV, even under the tight weight restriction of the ASCA spacecraft. The expected characteristics of the ASCA mirrors are summarized based on ray tracings and pre-flight calibrations. The total effective area of four telescopes at 1 and 7 keV are approximately 1200 and 600 sq cm, respectively. The image size (half power diameter: HPD) is about 3 min. The field of view is 24 min and 16 min full width at half maximum for 1 and 7 keV, respectively. Observations of several X-ray sources from space during the performance verification phase have confirmed those performances as well as the alignment of the optical systems.

Description: Data from the Diffuse Infrared Background Experiment (DIRBE) instrument aboard the Cosmic Background Explorer Satellite (COBE) spacecraft have been used to examine the near and far infrared signatures of the interplanetary dust (IPD) bands. Images of the dust band pairs at ecliptic latitudes of +/- 1.4 deg and +/- 10 deg have been produced at DIRBE wavelengths from 1.25 to 100 micrometers. The observations at the shorter wavelengths provide the first evidence of scattered sunlight from particles responsible for the dust bands. It is found that the grains in the bands and those in the smooth IPD cloud have similar spectral energy distributions, suggesting similar compositions and possibly a common origin. The scattering albedos from 1.25 to 3.5 micrometers for the grains in the dust bands and those in the IPD cloud are 0.22 and 0.29, respectively. The 10 deg band pair is cooler (185 +/- 10 K) than the smooth interplanetary dust cloud (259 +/- 10 K). From both parallactic and thermal analyses, the implied location of the grains responsible for the peak brightness of the 10 deg band pair is 2.1 +/- 0.1 AU the Sun A parallactic distance of 1.4 +/- 0.2 AU is found for the peak of the 1.4 deg band pair.

Description: We report a new component of Jovian radio emission observed by the Ulysses spacecraft when Ulysses was at high Jovigraphic latitudes (greater than or approximately = 30 deg north or south of the Jovian magnetic equator). This bursty high-latitude emission is elliptically polarized in the right-hand sense when observed from northern latitudes and in the left-hand sense when observed from southern latitudes, consistent with extraordinary mode. The orientation of the polarization ellipse is observed to systematically vary with time relative to the observer. It is argued that the elliptically-polarized nature of the emission is intrinsic to the source region.

Description: The high-energy diffuse gamma-ray emission from the interstellar gas in Orion was studied using observations from the Energetic Gamma-Ray Experiment Telescope (EGRET) on the Compton Gamma-Ray Observatory (CGRO) and radio surveys of the H I and CO emission. The good correlation of the gamma-ray emission with the atomic and molecular gas permits determination of the gamma-ray emissivity per nucleon in the interstellar medium and the molecular mass calibrating ratio N(H2)/W(sub co) in Orion. The integral gamma-ray emissivity is (1.7 +/- 0.1) x 10(exp -26)/s/sr for E greater than 100 MeV, in good agreement with expectations from studies of the diffuse emission on larger scales. The N(H2)/W(sub co) ratio is (1.06 +/- 0.14) x 10(exp 20)/sq cm/(K km/s), approximately 40% less than the commonly adopted Galactic average. We find no evidence for variations of the cosmic-ray density or N(H2)/W(sub co) ratio in Orion at the sensitivity and resolution of EGRET.

Description: We compare observations of BL Lac megaparsec-scale clustering environments with those for F-R I radio galaxies V and R image data are used to show that the strengths of the clustering measured via spatial cross-correlation amplitude are similar for the two types of galaxies and are consistent with Abel richness class 0. We discuss the implications this has for the origin of the BL Lac phenomena. We also examine the evolution of clustering environments of F-R I radio galaxies and BL Lac objects with redshift.

Description: We present a grid of stellar classification spectra of moderate resolution (R approximately 1500) in the range lambda lambda 5600-9000 A, compiled from high signal-to noise spectra of 275 stars, most in the open clusters Praesepe and M67. The grid covers dwarfs from types B8 through M5, giants from G8 through M7, and subgiants from F5 through K0. We catalog atomic and molecular absorption features useful for stellar classification, and demonstrate the use of luminosity-sensitive features to distinguish between late-type dwarf and giant stars. The entire database is made available in digital format on anonymous ftp and through the World Wide Web.

Description: In the past two centuries, alert amateur and professional meteor astronomers have documented 35 outbursts of 17 individual meteor streams well enough to allow the construction of a homogeneous set of activity curves. These curves add to similar profiles of the annual streams in a previous paper (Paper 1). This paper attempts to define the type and range of phenomena that classify as meteor outbursts from which the following is concluded: Outbursts are associated with the return of the comet to perihelion (near-comet type outbursts), but occur also when the parent comet is far from perihelion and far from the Earth (far-comet type). All outbursts of a given type only, depending on encounter geometry. The activity curves, expressed in terms of Zenith Hourly Rates (ZHR), have a shape that is generally well described by: ZHR = ZHR(sub max) 10(sup(-B (the absolute value of lambda (sub dot in a circle) - lambda (sup max) (sub dot in a circle))). The steepness of the slopes varies from an exponent of B = 7 to B = 220 per degree of solar longitude, with a typical value of B = 30. In addition, most near-comet type outbursts have a broader component underlying the main peak with B approximately 1 - 7.The duration Delta t is approximately 1/B of the main peak is almost independent of location near the comet, while the background component varies considerably in duration and relative intensity from one return to another. The two components in the activity curve are due to two distinct structures in the dust distribution near the parent comet, where the main component can be due to a sheet of dust that emanates from the IRAS dust trail. This brings the total number of distinct structures in meteor streams to four, including the two structures from the annual stream activity in Paper 1.

Description: On five occasions between 1992 June 29 and 1994 May 3, we have used the Australia Telescope Compact Array (ATCA) to image Eta Carinae at a wavelength of 3 cm and a resolution of 1 arcsec. These observations have revealed remarkable activity. Since 1992 June, the total flux density has increase from 0.8 to 2.2 Jy, and the original single compact source has grown to a complex of sources spread over an area of about 16 sq arcsec. Strong hydrogen recombination-line spectral emission has appeared at the site of the strongest of these new sources. This recombination emission has the largest spectral width ever observed from a star, +/- 250 km/s, and reveals gas with turbulent velocities as great as 250 km/s approaching us at an average velocity of about 200 km/s. We believe that this radio outburst has been caused by a more than threefold increase of ultraviolet luminosity, and consequent ionization of previously neutral gas clouds.

Description: The bright quasar Kaz 102, which lies in the vicinity of the North Ecliptic Pole, was monitored during the ROSAT All Sky Survey for 121.5 days from 1990 July 30 to 1991 January 25. In the course of the survey, optical photometry with various filters was peformed at several epochs, together with UV (IUE) and optical spectrophotometry. The spectral energy distribution in the 3 x 10(exp 14) -3 x 10(exp 17) Hz range is obtained simultaneously among the various frequencies to less than or = 1 day. No clear case of variability can be made in the X-rays, while in the optical and UV variability of 10%-20% is apparent. An analysis of IUE and Einstein archives indicates a doubling timescale of years for the UV and soft X-ray flux. The X-ray photon index, which in 1979 was rather flat (Gamma = 0.8(+0.6 -0.4), in 1990/1991 was found to be Gamma = 2.22 +/- 0.13, a typical value for radio-quiet quasars in this energy range. The overall energy distribution and the variability are discussed.

Description: This paper describes the calibration of the two solid-state Si(Li) X-ray detectors and the X-ray telescopes that flew as part of Goddard Space Flight Center's Broad Band X-Ray Telescope (BBXRT) experiment on board the space shuttle Columbia in 1990 December. During the 9 day shuttle mission, BBXRT performed approximately 150 observations of 82 celestial sources. The content of the archive is summarized here. Although BBXRT had a relatively short life, it stands as a milestone in X-ray astronomy as being the first instrument to offer moderate spectral resolution over a wide bandpass (0.3-12.0 keV). Among other things, this paper discusses the effective area calibration of the instrument, the flux calibration and flux corrections for off-axis observations, the detector background, and optimal background subtraction techniques. The on-axis effective area calibration for the central detector elements was performed using data from the Crab Nebula, while other carefully selected targets were used for calibration of the outer detector elements. The remaining systematic uncertainties in the effective area calibration for point sources observed both on and off axis are generally less than 5%-10%. The energy scale is known to better than 0.5% at 6.0 keV for both detectors. The results presented here have an impact on the calibration of other medium resolution X-ray experiments such as the CCDs on board ASCA (Astro-D) as well as the Advanced X-Ray Astrophysics Facility detectors.

Description: The BL Lacertae object OJ 287 was intensively monitored with the IUE satellite from 1993 March 15 to 20 in the 2000-3000 A wavelength region. The very low emission state of the source hampered the detection during part of the 23 performed exposures. The light curve at 2650 A constructed with the 11 best images exhibits a variable trend with a factor is less than or approximately 2 enhancement of the flux in about 3 hours. Simultaneous ground based observations show an optical flux variability of smaller amplitude, but correlated with the UV light curve without any apparent lag. The radio light curve is nearly constant. The UV emission state is the weakest observed in 15 years for this flaring blazard, being a factor of less than orapproximately 20 lower than the maximum recorded one.

Description: The twin Voyager spacecraft, launched nearly two decades ago, continue to operate and are now searching for the edge of our solar system, the heliopause. Voyager's giant-planet flybys of Jupiter, Saturn, Uranus, and Neptune have provided data that are likely to remain the definitive data set for the foreseeable future and have led to many ongoing discoveries. As the spacecraft move toward the heliopause, they are also providing data on the structure of the heliosphere. This article discusses the discoveries resulting from the flyby and heliosphere data that have been made within the past five years.

Description: Echelle mode spectra obtained with the Goddard High Resolution Spectrograph (GHRS) onboard the Hubble Space Telescope (HST) have been used to determine the abundances of the heavy elements Pt, Au, and Hg in the chemically peculiar HgMn-type stars kappa Cancri and chi Lupi. The abundances were determined by fitting observed line profiles with synthetically generated spectra and are found to be enhanced relative to solar system values by between three and five orders of magnitude in both stars. The Hg isotope mixture in kappa Cancri is found to resemble the terrestrial mixture while that of chi Lupi is dominated by the heaviest isotope. As determined from multiple ionization states, the abundances place constraints upon theories attempting to explain the large superficial abundances of heavy elements.

Description: The Goddard High Resoulution Spectrograph (GHRS) on the Hubble Space Telescope (HST) has been used to obtain medium (R = 20,000) and high (R = 85,000) resoultion UV spectra of chromosphere emission features for the M3.4 III star gamma Cru. Small Science Aperture (SSA) G270M and Echelle-B spectra of selected regions in the 2300-2850 A range were obtained to determine the kinematics of the chromosphere using lines of C2), Fe2, Co2, Si1/2), Ni2, Mn2, and Mg2. Profiles of C2) (UV 0.01) lines and fluorescently excited lines of low optical depth indicate average turbulent velocities (Doppler FWHM) of 30.2 +/- 1.3 and 28.8 +/- 1.3 km/s, respectively. The fluorescent emission lines (mean RV = 21.3 +/- 0.9 km/s) and the wings of the emission components of Fe2 lines (mean RV = 22.8 +/- 0.4 km/s) are approximately at rest relative to the radial velocity of the star (21 km/s), while the C2) lines show a modest inflow (mean RV = 23.1 +/- 0.9 km/s). The more opaque lines of Fe2 and Mg2 exhibit complex profiles resulting from line formation in an optically thick, extended expanding atmosphere. The emission wings of these lines are broadened by multiple scattering, and they are centered near the photospheric radial velocity. Closer to line center, these strong lines show a strong blueshifted self-absorption feature (already seen in IUE data), indicative of formation in an expanding chromosphere, and a previously unseen dip in the profiles on the red side of line center. The absorption components, when extracted using simple Gaussian fits, show strong correlations with the relative optical depths of the lines. The derived absorption flow velocities converge to the photospheric velocity as one examines spectra features formed deeper in the atmosphere. The blueward abosrption velocity increases in magnitude from about 7 to 14 km/s with increasing line optical depth - the strong absorptions directly map the acceleration of the outflowing stellar wind, while the interpretation of the weaker redshifted abosrptions is more ambiguous, indicating either an inflow of material or formation in an extended, spherically expanding outflow. The Mg2 and Fe2 profiles, taken together, imply that the wind speed decreases between the atmospheric layers where the Mg2 and Fe2 self-absorption components are formed. Interstellar absorptions are seen in the resonance lines of Mg2 (UV 1) and Fe2 (UV1) with zero-volt lower levels, at about -3 km/s, consistent with models of the interstellar medium in the direction of gamma Cru. Finally, we have detected the Mg2 'satellite lines' seen in solar spectra obtained above the limb. In gamma Cru these lines are probably fluorescently excited by H Ly beta.

Description: Scientists are still trying to piece together what exactly occurred when comet fragments from Shoemaker-Levy 9 impacted with Jupiter last year. Several theories have been from the data received from Galileo and the Hubble Space Telescope (HST) together with the modeling of the impacts using supercomputers, scientists hope to discover the answers to their questions and perhaps to resolve the differences that have arisen between the different model simulations.

Description: A brief discussion on the characteristics of pulsars is given followed by a review of millisecond pulsar discoveries including the very first, PRS B1937+21, discovered in 1982. Methods of timing millisecond pulsars and the accuracy of millisecond pulsars as clocks are discussed. Possible reasons for the pulse residuals, or differences between the observed and predicted pulse arrival times for millisecond pulsars, are given.

Description: We present data on the galactic X-ray source 1E 1740.7-2942 from the Oriented Scintillation Spectrometer Experiment (OSSE) on board NASA's Compton Gamma Ray Observatory (CGRO). Episodes of increased low-energy gamma radiation have been reported from this source, including 1-day events in 1990 October and 1992 September. These events, of intensity 7 x 10(exp -3) and 4 x 10(exp -3) photons/sq cm/s, respectively, have been interpreted as broadened and redshifted positron annihilation radiation. OSSE conducted observations of the Galactic Center region during a 21-day interval from 1992 September 17 thru 1992 October 8. This includes the time of increased 200-450 keV emission from 1E 1740.7-2942 reported by SIGMA. The OSSE observations do not confirm this event. For the specific outburst recorded by SIGMA, 1992 Sep. 19.42-20.58 (UT), OSSE data provide an upper limit (3 sigma) of 2.4 x 10(exp -3) photons/sq cm/s.

Description: X-ray observations of Abell 548 reveal that the hot gas in this cluster is at least as complex as the galaxy distribution. Our ROSAT Position Sensitive Proportional Counter (PSPC) image is used in conjunction with optical data from the Minnesota plate-scanning project and redshift data in the literature to investigate the degree of substructure in the intracluster medium and the galaxy distribution. A548 has several X-ray components: hot gas associated with clumps of galaxies, individual sources, and a newly discovered diffuse component. This diffuse component may be promordial gas falling into the cluster for the first time. The optical data suggest that this cluster consists of four major components, not three (as indicated when velocity data are ignored). Simple models of the orbital dynamics suggest that the cluster may not yet have reached its turnaround radius.

Description: The Photogrammetric Appendage Structural Dynamics Experiment (PASDE) is a Hitchhiker payload scheduled to fly as part of the International Space Station (ISS) Phase-1 flight program to the Russian Space Station Mir. The objective of the first flight of PASDE on STS-74 is to obtain video images of the Mir Kvant-2 solar array response to various structural dynamic excitation events. This experiment will demonstrate the use of photogrammetric techniques for on-orbit structural dynamics measurements. Photogrammetric measurements will provide a low cost alternative to appendage mounted accelerometers to the ISS program. The PASDE experiment hardware consists of three instruments each containing two video cameras, two video tape recorders, a modified video signal time inserter, and associated avionics boxes. The instruments were designed and built at the NASA Langley Research Center, and are integrated into standard Hitchhiker canisters at the NASA Goddard Space Flight Center. The Hitchhiker canisters are then installed into the Space Shuttle cargo bay in locations selected to achieve good video coverage and photogrammetric geometry. The measurement resolution of the instruments is expected to be on the order of 0.25 cm (0.1 in.).

Description: For the past 20 years, the 91 cm telescope in NASA's Kuiper Airborne Observatory (KAO) has enabled scientists to observe infrared sources which are obscured by the earth's atmosphere at ground-based sites, and to observe transient astronomical events from anywhere in the world. To augment this capability, the United States and German Space Agencies (NASA and DARA) are collaborating in plans to replace the KAO with a 2.5 meter telescope installed in a Boeing 747 aircraft: SOFIA - The Stratospheric Observatory for Infrared Astronomy. SOFIA's large aperture, wide wavelength coverage, mobility, accessibility, and sophisticated instruments will permit a broad range of scientific studies, some of which are described here. Its unique features complement the capabilities of other future space missions. In addition, SOFIA has important potential as a stimulus for development of new technology and as a national resource for education of K-12 teachers. If started in 1996, SOFIA will be flying in the year 2000.

Description: We have obtained images of the Orion Bar region through narrow-band filters at 6.2 and 7.8 mu m to determine whether the emission observed at these wavelengths arises from C-C modes in polycyclic aromatic hydrocarbons (PAH's). Morphologically, the distribution of the emissions are similar, but appear different in detail. Quantitative comparisons of these band intensities with previous data at 8.4 and 11.3 mu m indicates that they are indeed consistent with emission from fluorescently excited PAH molecules.

Description: The Boeing Company, under contract to the Electric Power Research Institute (EPRI), has completed a test program on the Mod-2 wind turbines at Goodnoe Hills, Washington. The objectives were to update fatigue load spectra, discern site and machine differences, measure vortex generator effects, and to evaluate rotational sampling techniques. This paper shows the test setup and loads instrumentation, loads data comparisons and test/analysis correlations. Test data are correlated with DYLOSAT predictions using both the NASA interim turbulence model and rotationally sampled winds as inputs. The latter is demonstrated to have the potential to improve the test/analysis correlations. The paper concludes with an assessment of the importance of vortex generators, site dependence, and machine differences on fatigue loads. The adequacy of prediction techniques used are evaluated and recommendations are made for improvements to the methodology.

Description: Empirical equations are presented with which to model rotationally-sampled (R-S) turbulence for input to structural-dynamic computer codes and the calculation of wind turbine fatigue loads. These equations are derived from R-S turbulence data which were measured at the vertical-plane array in Clayton, New Mexico. For validation, the equations are applied to the calculation of cyclic flapwise blade loads for the NASA/DOE Mod-2 2.5-MW experimental HAWT's (horizontal-axis wind turbines), and the results compared to measured cyclic loads. Good correlation is achieved, indicating that the R-S turbulence model developed in this study contains the characteristics of the wind which produce many of the fatigue loads sustained by wind turbines. Empirical factors are included which permit the prediction of load levels at specified percentiles of occurrence, which is required for the generation of fatigue load spectra and the prediction of the fatigue lifetime of structures.

Description: A computational procedure is presented for evaluating the sensitivity coefficients of the dynamic axisymmetric response of viscoplastic shells of revolution. The analytical formulation is based on Reissner's large deformation shell theory with the effects of transverse shear deformation, rotatory inertia and moments turning around the normal to the middle surface included. The material model is chosen to be isothermal viscoplasticity, and an associated flow rule is used with a von Mises effective stress. A mixed formulation is used with the fundamental unknowns consisting of six stress resultants, three generalized displacements and three velocity components. Spatial discretization is performed using finite elements, with discontinuous stress resultants across element interfaces. The temporal integration is performed by using an explicit central difference scheme (leap-frog method) with an implicit constitutive update. The sensitivity coefficients are evaluated using a direct differentiation approach. Numerical results are presented for a spherical cap subjected to step loading, and a circular plate subjected to impulsive loading. The sensitivity coefficients are generated by evaluating the derivatives of the response quantities with respect to thickness, mass density, Young's modulus, and two of the material parameters characterizing the viscoplastic response. Time histories of the response and sensitivity coefficients are presented, along with spatial distributions of these quantities at selected times.

Description: Hypervelocity impact experiments were performed to further test the survivability of carbonaceous impactors and to determine potential products that may have been synthesized during impact. Diamonds were launched by the Ames two-stage light gas gun into Al plate at velocities of 2.75 and 3.1 km sec(exp -1). FESEM imagery confirms that diamond fragments survived in both experiments. Earlier experiments found that diamonds were destroyed on impact above 4.3 km sec(exp -1). Thus, the upper stability limit for diamond on impact into Al, as determined from our experimental conditions, is between 3.1 and 4.3 km sec(exp -1). Particles of the carbonaceous chondrite Nogoya were also launched into Al at a velocity of 6.2 km sec (exp -1). Laser desorption (L (exp 2) MS) analyses of the impactor residues indicate that the lowest and highest mass polycyclic aromatic hydrocarbons (PAH's) were largely destroyed on impact; those of intermediate mass (202-220 amu) remained at the same level or increased in abundance. In addition, alkyl-substituted homologs of the most abundant pre-impacted PAH's were synthesized during impact. These results suggest that an unknown fraction of some organic compounds can survive low to moderate impact velocities and that synthesized products can be expected to form up to velocities of, at least, 6.5 km sec(exp -1). We also present examples of craters formed by a unique microparticle accelerator that could launch micron-sized particles of almost any coherent material at velocities up to approximately 15 km sec(exp -1). Many of the experiments have a direct bearing on the interpretation of LDEF craters.

Description: Interpretation of the wealth of impact data available from the Long Duration Exposure Facility, in terms of the absolute and relative populations of space debris and natural micrometeoroids, requires three dimensional models of the distribution of impact directions, velocities and masses of such particles, as well as understanding of the impact processes. Although the stabilized orbit of LDEF provides limited directional information, it is possible to determine more accurate impact directions from detailed crater morphology. The applicability of this technique has already been demonstrated but the relationship between crater shape and impactor direction and velocity has not been derived in detail. We present the results of impact experiments and simulations: (1) impacts at micron dimensions using the Unit's 2MV Van de Graaff accelerator; (2) impacts at mm dimensions using a Light Gas Gun; and (3) computer simulations using AUTODYN-3D from which an empirical relationship between crater shape and impactor velocity, direction and particle properties we aim to derive. Such a relationship can be applied to any surface exposed to space debris or micrometeoroid particles for which a detailed pointing history is available.

Description: A 5.2 mm crater in Al-metal represents the largest found on LDEF. We have examined this crater by field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS) and time-of-flight/secondary ion mass spectroscopy (TOF-SIMS) in order to determine if there is any evidence of impactor residue. Droplet and dome-shaped columns, along with flow features, are evidence of melting. EDS from the crater cavity and rim show Mg, C, O and variable amounts of Si, in addition to Al. No evidence for a chondritic impactor was found, and it hypothesized that the crater may be the result of impact with space debris.

Description: The nearby barred spiral galaxy NGC 1672 has been observed with the Position Sensitive Proportional Counter (PSPC) and High Resolution Imager (HRI) instruments on board the ROSAT X-ray satellite. NGC 1672 is thought to have an obscured Seyfert nucleus, and it has strong starburst activity as well. Three bright X-ray sources with luminosities 1-2 x 10(exp 40) erg/s are clearly identified with NGC 1672. The strongest lies at the nucleus, and the other two lie at the ends of NGC 1672's prominent bar, locations that are also bright in H alpha and near-infrared images. The nuclear source is resolved by the HRI on about the scale of the recently identified nuclear ring, and one of the sources at the ends of the bar is also probably resolved. The X-ray spectrum of the nuclear source is quite soft, having a Raymond-Smith plasma temperature of approximately equals 0.7 keV and little evidence for intrinsic absorption. The ROSAT band X-ray flux of the nuclear source appears to be dominated not by X-ray binary emission but rather by diffuse gas emission. The absorption and emission properties of the sources, as well as their spatial extents, lead us to models of superbubbles driven by supernovae. However, the large density and emission measure of the nuclear X-ray source stretch the limits that can be comfortably accommodated by these models. We do not detect direct emission from the putative Seyfert nucleus, although an alternative model for the nuclear source is thermal emission from gas that is photoionized by a hidden Seyfert nucleus. The spectra of the other two X-ray sources are harder than that of the nuclear source, and have similar difficulties with regard to superbubble models.

Description: We report maps of the 158 micron (C II) line, the 63 micron and 146 micron (C I) lines, the 2.2 micron Br gamma line, and the 2.6 mm CO (1-0) line toward the 30 Doradus complex in the Large Magellanic Cloud. The maps of all tracers emphasize the shell-like structure of the 30 Doradus region which is seen edge-on. The fact that the molecular gas as traced by CO (1-0) and the photo dissociated gas as traced by (C II) are co-extensive over tens of parsecs can only be explained by a highly fragmented structure of the interstellar medium which allows UV radiation to penetrate deep into the molecular cloud. Clumpiness is also the key to understanding the extremely high (C II)/CO line intensity ratios.

Description: We present results from a KAO survey of fine-structure lines observed in 23 infrared-luminous galaxies. One or more of the following lines was observed and/or detected in each galaxy: (S III) 19, 33 microns, (Ne V) 24 microns, (O IV) 26 microns, (Fe II) 26 microns, (Si II) 35 microns, (O III) 52, 88 microns, (0 I) 63, 146 microns, (N III) 57 micro ns, (N II) 122, 205 microns, (C II) 158 microns. The galaxies span a wide range of morphologies (irregular to grand design), have varying metallicities, and include mergers, AGN's, and starburst systems. The observations were made beginning in 1988 using the facility Cryogenic Grating Spectrometer onboard the KAO at a typical resolution of approximately 60-140 km/s and with a 30-44 deg beam. We interpret the (C II) and (O I) fluxes, along with previous measurements of the IR continuum fluxes, in the context of photo dissociation region (PDR) models (Tielens & Hollenbach 1985; Wolfire et al. 1990). With these models, we obtain estimates of the typical interstellar UV fields incident on the line emitting regions (102-104 times the local interstellar radiation field) and the total masses (10(exp 7)-10(exp 8) Solar Mass), densities (10(exp 3)-10(exp 4)/cu cm), and temperatures (100-250 K) of the warm atomic gas. The (O III) (52/88) and (S III) (33/19) line flux ratios constrain the range of electron densities and pressures found within the ionized regions. The (O III) and (S III) lines also provide estimates of the effective temperature of the ionizing stars and elemental abundances within the ionized regions of these galactic nuclei. Our measurements imply typical gas pressures of nT approximately 5 x 10(exp 6)/cu cm K and typical upper mass cutoffs of 25-35 Solar Mass. The low-metallicity systems show high (C II)/CO and (O I)/CO flux ratios, 3-5 times the Milky Way value, indicating that they contain a larger fraction of photodissociated gas relative to the molecular material.

Description: The finite deformation field of a plane strain Mode 1 crack in a hyperelastic and incompressible material was examined under the assumptions of small scale nonlinearity. Finite element analyses were performed for two different material laws, a Neo-Hookean material and a third order invariant of a Rivlin material. The numerical results for both materials were compared to the appropriate theoretical asymptotic solution. A local cavitation locus surrounding the crack tip was identified for the Neo-Hookean material. For the third order invariant Rivlin material, maximum values of the dominant stress component were found close to the surface of the crack, above and below the deformed crack tip.

Description: The Infrared Telescope in Space is a cryogenically-cooled NASA/ISAS space survey instrument scheduled for a February, 1995 launch. The telescope optical system is optimized for studies of extended low surface-brightness objects. Four focal-plane instruments cover wavelengths ranging form 1 to 800 microns.

Description: ISO, scheduled to launch in 1995, will carry into orbit the most sophisticated infrared observatory of the decade. Overviews of the mission, instrument payload and scientific program are given, along with a comparison of the strengths of ISO and SOFIA.

Description: The first published paper by a professional, research astronomer which discussed airborne astronomy from airplanes was by Paul W. Merrill. In it he proposed some of the types of observations which might be made, looking up at astronomical objects in the sky. This paper describes Merrill's paper, his education, training and subsequent career, and a few other aspects of the early history of airborne astronomy.

Description: Airborne and ground-based IR telescopes have oscillating secondary mirrors to permit subtraction of background emission from the sky and telescope. These chopping mirrors are synchronized to a clock which may originate in the data acquisition system. For laboratory testing of detecting instruments with such data systems, externally synchronized chopped IR sources are required. We describe a laboratory chopper in which a synchronous motor is driven by 2-phase sinusoidal currents in sync with an external clock at frequencies from 5 to 50 Hz. This design is used with the KAO's facility sources, the Chopped Hotplate and the Portable Chopped Light Source (PCLS).

Description: We discuss proposed observations of the polarization of submillimeter continuum emission from the extended Galactic Center region. The observations will be made from the South Pole, using the VIPER 2-meter telescope.

Description: The Antarctic Plateau provides the preeminent sites on the surface of the Earth for many types of astronomical observation. We have embarked on a site testing program to quantify the ultimate sensitivity levels achievable. The program is now in operation at the South Pole, where an infrared sky brightness monitor and micro-thermal temperature sensors have been deployed. We plan to extend these measurements, first at the Pole, and then to the highest parts of the plateau, Domes Argus and Circe. The latter will involve adapting an 'automated geophysical observatory,' a mobile laboratory designed for autonomous operation on the plateau, for astrophysical purposes.

Description: Existing observations of the Galactic Center at infrared and radio wavelengths challenge our understanding of the detailed morphology and energy balance of the inner few parsec, including the Galactic Center and the infrared torus. The distribution and nature of the sources heating this region are still not well understood; existing determinations of dust temperature and ionization do not provide us with consistent pictures of the relative important of the central source and the embedded stars in this dusty region. The composite IR emission of the Galactic Center can be crudely divided into three categories: (1) hot dust heated directly by an incident UV field along the inner region of the Galactic Center torus; (2) warm dust heated by te non-ionizing radiation of the embedded stars and re-radiated NIR dust emission; (3) cooler absorbing dust located along the galactic line of sight. The apparent inconsistencies between the observations and theoretical expectations may stem from the interplay of various physical process and source-cloud geometries. Observations with increased spatial and spectral resolution are clearly needed to provide the information necessary to address the various problems. Therefore, we made 15-45 micron spectrophotometric observations of the inner 80 min (3 pc) regions surrounding the Galactic Center with the 20 min aperture of Goddard Cryogenic Grating Spectrometer No. 2 in May 1994 from the KAO. We measured nine points, including the 50 and 90 micron peaks of Davidson et al. and points between them and SgrA,. The wavelength coverage of our instrument ensures sensitivity to the hot dust component, silicate emission and/or absorption features, and cooler dust at longer wavelengths. Our observations will be used to set limits on the luminosity of any central sources, or give an independent estimate of central luminosity, and to set limits on the range of acceptable dust parameters for this region.

Description: Two molecular clouds are clearly interacting with the Galactic Center Radio Arc. The HII regions located at both sites of interaction - the 'Arched Filaments' and G0.18-0.04 - are powerful sources of far-infrared radiation, each having a total luminosity of approx. 10(exp 7) solar luminosity. Using the University of Texas far-IR Photometer at 50 and 90 microns, we found that the emission is substantially more extended than the filamentary HII regions, and that, while the intensity peaks at the locations of the filaments, the dust temperature shows only weak variations, implying that the heating is relatively uniform. The Arched Filaments were also observed with the University of Chicago far-IR Array Polarimeter, STOKES, at 100 microns. The greater than 100 independently sampled positions cover most of the 5 ft x 7 ft area of the Arched Filaments. The polarization is relatively strong (up to 9.4%) almost everywhere in this region. Also, the slow and smooth variations of the polarization angles across the region are consistent with the large magnetic field strengths and the highly-ordered geometry deduced from radio measurements. However, it appears that the magnetic field direction inferred from far-IR polarization (parallel to the Arched Filaments and following their curvature) is very different from that implied by the nonthermal radio filaments. The magnetic field, gas motions, and gravitational potential gradient in the arched filament region are all consistent with gravitational shearing of the molecular cloud underlying the Arched Filaments.

Description: A significant fraction of a star's initial mass is lost while it is on the Asymptotic Giant Branch (AGB). Mass loss rates range from 10(exp -7) solar mass/yr for early AGB stars to a few 10(exp -4) solar mass/yr for stars at the tip of the AGB. Dust grains condense from the outflow as the gas expands and form a dust shell around the central star. A superwind (approximately 10(exp -4) to 10(exp -3) solar mass/yr) is thought to terminate the AGB phase. In the post-AGB phase, the star evolves to a higher effective temperature, the mass loss decreases (approximately 10(exp -8) solar mass/yr), but the wind velocity increases (approximately 1000 km/s). During this evolution, dust and gas are exposed to an increasingly harsher radiation field and when T(sub eff) reaches about 30,000 K, the nebula is ionized and becomes a planetary nebula (PN). Photons from the central star can create a photodissociation region (PDR) in the expanding superwind. Gas can be heated through the photoelectric effect working on small grains and polycyclic aromatic hydrocarbons (PAH's). This gas can cool via the atomic fine structure lines of O I (63 microns and 145 microns) and C II (158 microns), as well as the rotational lines of CO. In the post-AGB phase, the fast wind from the central star will interact with the material ejected during the AGB phase. The shock caused by this interaction will dissociate and heat the gas. This warm gas will cool through atomic fine structure lines of O I and the rotational lines of (newly formed) CO.

Description: Explosion calculations of SN1987A generate pictures of Rayleigh-Taylor fingers of radioactive Ni-56 (Ni-56 yields Co-56 yields Fe-56) which are boosted to velocities of several thousand km/s. From the KAO observations of the mid-IR iron lines, a picture of the iron in the ejecta emerges which is consistent with the 'frothy iron fingers' having expanded to fill about 50% of the metal-rich volume of the ejecta (nu(sub m) less than or equal to 2500 km/s). The ratio of the nickel line intensities I(sub (Ni I)7.5 micron)/I(sub (Ni II)6.6 microns) yields a high ionization fraction of x(sub Ni) greater than or equal to 0.9 in the volume associated with the iron-group elements at day 415, before dust condenses in the ejecta. From the KAO observations of the dust's thermal emission (2 microns to 100 microns), it is deduced that when the grains condense, their infrared radiation is trapped, their apparent opacity is gray, and they have a surface area filling factor of about 50%. The dust emission from SN1987A is featureless: no 9.7 micron silicate feature, nor PAH features, nor dust emission features of any kind are seen at any time. The total dust opacity increases with time even though the surface area filling factor and the dust/gas ratio remain constant. This suggests that the dust forms along coherent structures which can maintain their radial line-of-sight opacities, i.e., along fat fingers. The coincidence of the filling factor of the dust and the filling factor of the iron strongly suggests that the dust condenses within the iron, and therefore the dust is iron-rich. It only takes approximately 10(exp -4) solar mass of dust for the ejecta to be optically thick out to approximately 100 microns; a lower limit of 4 x 10(exp -4) solar mass of condensed grains exists in the metal-rich volume, but much more dust could be present. The episode of dust formation started at about 539 days and proceeded rapidly, so that by 600 days 45% of the bolometric luminosity was being emitted in the IR; by 775 days, 86% of the bolometric luminosity was being reradiated by the dust. Measurements of the bolometric luminosity of SN1987A from 1000 to 2300 days are based on 10 micron and 20 micron photometry and rely on the suppositions that the IR emission is a graybody (proven to be true by the KAO observations at 615 and 775 days) and that the dust temperature drops to and remainsat 150 K. The late-time bolometric luminosity is stronger than that expected from the radioactive decay of Co-56, Co-57, Ti-44, and Na-22 and the late-time dust temperatures are consistent with the presence of a compact object.

Description: A strong absorption band at 3590 +/- 20 cm(exp -1) (2.790 +/- 0.015 microns) has been discovered in the spectrum of Io using the Kuiper Airborne Observatory (KAO). The 2 nu(sub 1) + nu(sub 3) combination mode of solid SO2 falls at this position. Since SO2 is abundant on Io it must contribute to the new band. However, a band due to H2O was also predicted near this frequency in Io's spectrum based on laboratory experiments of H2O:SO2 mixed Io ice analogs which were used to assign the two weak, variable features at 3370 and 3170 cm(exp -1) (2.97 and 3.15 microns) to trace amounts of H2O frozen in solid SO2 on Io. The new band probably originates from both SO2 and H2O. Unfortunately, the spectral resolution of the data is insufficient to settle the issue of whether or not there are two resolvable components.

Description: Experiments with Pixon-based image deconvolution demonstrate that this technique can significantly enhance the spatial resolution of two-dimensional images acquired by the UT multichannel far-infrared photometer. A deconvolved 100 micron image of the giant HII region NGC 3603 reveals a bright, asymmetrical central peak some 40 x 55 arcsec in size, possibly surrounded by several secondary peaks. The results using the pixon technique are compared with those obtained using the standard Maximum Entropy and Richardson-Lucy methods.

Description: Our high spatial resolution 50 and 100 micro m observations of the peculiar galaxy NGC 2146 show that the FIR emission arises in a 21 arc-sec x is less than 16 arc-sec (1.5 kpc x is less than 1.1 kpc) region (FWHM) elongated along the major axis. This size limit is similar to that of the radio continuum, the (12)CO (1 - 0), and the H alpha. From an investigation of the energetics in this galaxy, we conclude that young massive stars are largely responsible for powering the FIR luminosity of this galaxy. The FIR and CO (1 - 0) distributions differ from the extinction morphology as seen in optical images and in the Br gamma/H alpha ratio. The starlight and the ionized gas are most highly reddened at the prominent dust lane 15 arc-sec to the west of the nucleus, while the CO and FIR emission peak near the nucleus. This result can be explained by either a high proportion of cold dust and gas at the dust lane, or a geometry in which the dust lane lies in front of the main body of the galaxy.

Description: We have observed C(exp 0) across the nucleus of the starburst galaxy NGC253. C(exp 0) is very bright and we find N(C(exp 0))/N(CO) is between 1.5 and 2.3 across the nucleus. Existing PDR models cannot explain the observed C(exp 0) intensity. The size of the observed region seems to rule out 'simultaneous very early time chemistry' across the nucleus. Chemical models in which C(sup 0)/CO is enhanced deep in molecular clouds by large fluxes of cosmic rays also struggle to explain our observations. The most plausible explanation for the observed C(exp 0) is that the C/O elemental ratio is enhanced in NGC253.

Description: The Kuiper Airborne Observatory has been a powerful instrument for the study of nearby galaxies, and SOFIA could probe still further into the local Universe. However, a comprehensive program of extragalactic exploration in the infrared - and in particular a study of galaxies at cosmological redshifts - requires the high sensitivity and complete wavelength coverage which is achievable only with a cryogenic telescope in space. This program was begun by IRAS and will be continued by the upcoming ISO (Infrared Space Observatory), WIRE (Wide field Infrared Explorer) and SIRTF (Space Infrared Telescope Facility) missions. This paper previews a set of extragalactic investigations which could be carried out by these missions.

Description: We have used a 20-channel bolometer array on NASA's Kuiper Airborne Observatory to obtain photometry and size information for several main sequence stars surrounded by dust shells. The observations were made at 50 and/or 100 micrometers on flights based in Christchurch, New Zealand, in 1992, 1993. The stars include the 'Vega-like' star, Beta Pic, as well as two stars, HD 135344 and HD 139614, suggested by subsequent studies to belong possibly to the same class. The results of our observations are best interpreted as upper limits to the far-infrared sizes of the dust clouds around these stars. In addition to the basic size and flux measurements, we have fit simple, optically thin models to the Beta Pic data to explore the range of shell parameters consistent with our limits and with previous observations.

Description: Theoretical models of the formation of low mass stars by cloud collapse predict that OI(63 micrometers) and IR rotational lines of CO and H2O dominate the cooling in the freefalling region 10-1000 AU from the protostar. The freefalling gas supersonically hits the protoplanetary disk orbiting the protostar, forming an accretion shock with strong IR emission in rotational lines of H2O and OH, and OI(63 microns). The accretion shock spectra and line profiles depend on the mass flux through the shock and the typical distance r-bar at which the freefalling gas strikes the disk. The line widths are of order the Keplerian speed, or approx. 10(r-bar/10AU)(exp -0.5) km/s, for the accretion shock lines, and less for the lines from the infalling gas. Measurements of the IR line fluxes and profiles from the freefalling gas and the accretion shock diagnoses how a protostar and disk are formed and requires high sensitivity and high spectral and spatial resolving power. SOFIA will be the optimum observatory for many of these lines, although ISO will contribute and the KAO may make a few pioneering detections.

Description: Simultaneous dual-wavelength observations by the KAO of a recent Chiron occultation provide a measure of the relative extinction efficiencies of particles near Chiron. This observation and Mie scattering theory allow us to constrain the size of grains causing the extinction of the starlight near Chiron.

Description: Stellar occultation observations probe the atmospheric structure and extinction of outer solar system bodies with a spatial resolution of a few kilometers, and an airborne platform allows the observation of occultations by small bodies that are not visible from fixed telescopes. Results from occultations by Triton, Pluto, and Chiron observed with KAO are discussed, and future directions for this program are presented.

Description: We have carried out 60 micron imaging observations of a sample of nearby, far-infrared bright galaxies, using the Yerkes infrared camera aboard the KAO. A total of eleven galaxies have been observed, most of which are actively star-forming, barred spirals. In this contribution we present our first set of observations on four galaxies: NGC 4102, NGC 4536, NGC 5962, and NGC 6181.

Description: We have searched for rovibrational emission and absorption transitions arising from the 63 cm(exp -1) nu(sub 2) (pi(sub u)) bending vibration of the C3 carbon cluster in the interstellar medium using the Betz/Boreiko heterodyne receiver on board the Kuiper Airborne Observatory. The Q(4) line at 1896.707 GHz was searched for in the IRc2 Orion/M42 and the W3 sources, and the R(2) transition at 1968.594 GHz was searched for in Sgr B2. No emission lines were observed in any source. However, a weak absorption was detected in Sgr B2 with a LSR velocity of 63.7+/-0.6 km s(exp -1) and a FWHM linewidth of 7.9+/-0.8 km s(exp -1). This absorption is tentatively identified as the R(2) transition of the C(sub 3) bending mode.

Description: This issue on gamma ray astronomy presents many results from observations made with the Compton Gamma Ray Observatory (CGRO) and other spaceborne experiments and includes studies of Seyfert galaxies, X-ray binaries, neutron stars, diffuse cosmic background radiation, pulsars, blazars, gamma ray bursts, the galactic center, and the distribution of Aluminum-26 in the galaxy. The issue begins with a survey of Compton Telescope (COMPTEL) results and concludes with future prospects for the field.

Description: Broadband imaging in the far infrared is a vital tool for understanding how young stars form, evolve, and interact with their environment. As the sensitivity and size of detector arrays has increased, a richer and more detailed picture has emerged of the nearest and brightest regions of active star formation. We present data on M 17, M 42, and S 106 taken recently on the Kuiper Airborne Observatory with the Yerkes Observatory 60-channel far infrared camera, which has pixel sizes of 17 in. at 60 microns, 27 in. at 100 microns, and 45 in. at 160 and 200 microns. In addition to providing a clearer view of the complex central cores of the regions, the images reveal new details of the structure and heating of ionization fronts and photodissociation zones where radiation form luminous stars interacts with adjacent molecular clouds.

Description: A 1.5 meter reflector, used for both infrared and optical astronomy, is also being used for infrared speckle interferometry and CCD imaging. The application of these imaging techniques to remote galaxies and active galactic nuclei are discussed. A simple model for the origin of speckle in coherent imaging systems is presented. Very careful photometry of the continuum of the galaxy M31 is underway using CCD images. It involves extremely intensive data reduction because the object itself is very large and has low surface brightness.

Description: Approximately 20 sq m of protective thermal blankets, largely composed of Teflon, were retrieved from the Long Duration Exposure Facility (LDEF) after the spacecraft had spent approximately 5.7 years in space. Examination of these blankets revealed that they contained thousands of hypervelocity impact features ranging from micron-sized craters to penetration holes several millimeters in diameter. We conducted impact experiments in an effort to reproduce such features and to -- hopefully -- understand the relationships between projectile size and the resulting crater or penetration-hole diameter over a wide range of impact velocity. Such relationships are needed to derive the size- and mass-frequency distribution and flux of natural and man-made particles in low-Earth orbit. Powder propellant and light-gas guns were used to launch soda-lime glass spheres of 3.175 mm (1/8 inch) nominal diameter (Dp) into pure Teflon FEP targets at velocities ranging from 1 to 7 km/s. Target thickness (T) was varied over more than three orders of magnitude from infinite halfspace targets (Dp/T less than 0.1) to very thin films (Dp/T greater than 100). Cratering and penetration of massive Teflon targets is dominated by brittle failure and the development of extensive spall zones at the target's front and, if penetrated, the target's rear side. Mass removal by spallation at the back side of Teflon targets may be so severe that the absolute penetration-hole diameter (Dh) can become larger than that of a standard crater (Dc) at relative target thicknesses of Dp/T = 0.6-0.9. The crater diameter is infinite halfspace Teflon targets increases -- at otherwise constant impact conditions -- with encounter velocity by a factor of V0.44. In contrast, the penetration-hole size is very thin foils (Dp/T greater than 50) is essentially unaffected by impact velocity. Penetrations at target thicknesses intermediate to these extremes will scale with variable exponents of V. Our experimental matrix is sufficiently systematic and complete, up to 7 km/s, to make reasonable recommendations for the velocity-scaling of Teflon craters and penetrations. We specifically suggest that cratering behavior and associated equations dominate all impacts in which the shock-pulse duration of the projectile (tp) is shorter than that of the target (tt). We also demonstrate that each penetration hole from space-retrieved surfaces may be assigned a unique projectile size, provided an impact velocity is known or assumed. This calibration seems superior to the traditional ballistic-limit approach.

Description: A computational procedure is presented for evaluating the sensitivity coefficients of the dynamic frictional contact/impact response of axisymmetric composite structures. The structures are assumed to consist of an arbitrary number of perfectly bonded homogeneous anisotropic layers. The material of each layer is assumed to be hyperelastic, and the effect of geometric nonlinearity is included. The sensitivity coefficients measure the sensitivity of the response to variations in different material, lamination and geometric parameters of the structure. A displacement finite element model is used for the discretization. The normal contact conditions are incorporated into the formulation by using a perturbed Lagrangian approach with the fundamental unknowns consisting of the nodal displacements, and the Lagrange multipliers associated with the contact conditions. The Lagrange multipliers are allowed to be discontinuous at interelement boundaries. Tangential contact conditions are incorporated by using a penalty method in conjunction with the classical Coulomb's friction model. Temporal integration is performed by using Newmark method. The Newton-Raphson iterative scheme is used for the solution of the resulting nonlinear algebraic equations, and for the determination of the contact region, contact conditions (sliding or sticking), and the contact pressures. The sensitivity coefficients are evaluated by using a direct differentiation approach. Numerical results are presented from the frictional contact/impact response of a composite spherical cap impacting on a rigid plate.

Description: A computational strategy is presented for postbuckling and nonlinear static analyses of large complex structures on distributed-memory parallel computers. The strategy is designed for message-passing parallel computer systems. The key elements of the proposed strategy are: (1) a multiple-parameter reduced basis technique; (2) a nested dissection (or multilevel substructuring) ordering scheme; (3) parallel assembly of global matrices; and (4) a parallel sparse equation solver. The effectiveness of the strategy is assessed by performing thermomechanical postbuckling analyses of stiffened composite panels with cutouts, and nonlinear large-deflection analyses of High Speed Civil Transport models on three distributed-memory computers. The numerical studies presented demonstrate the advantages of nested dissection-based solvers over traditional skyline-based solvers on distributed-memory machines.

Description: A computational strategy is presented for the nonlinear static and postbuckling analyses of large complex structures on massively parallel computers. The strategy is designed for distributed-memory, message-passing parallel computer systems. The key elements of the proposed strategy are: (1) a multiple-parameter reduced basis technique; (2) a nested dissection (or multilevel substructuring) ordering scheme; (3) parallel assembly of global matrices; and (4) a parallel sparse equation solver. The effectiveness of the strategy is assessed by applying it to thermo-mechanical postbuckling analyses of stiffened composite panels with cutouts, and nonlinear large-deflection analyses of HSCT models on Intel Paragon XP/S computers. The numerical studies presented demonstrate the advantages of nested dissection-based solvers over traditional skyline-based solvers on distributed memory machines.

Description: A reduced basis technique and a computational procedure are presented for generating the nonlinear vibrational response, and evaluating the first-order sensitivity coefficients of thin-walled composite frames. The sensitivity coefficients are the derivatives of the nonlinear frequency with respect to the material and lamination parameters of the frame. A mixed formulation is used with the fundamental unknowns consisting of both the generalized displacements and stress resultants in the frame. The flanges and webs of the frames are modeled by using geometrically nonlinear two-dimensional shell and plate finite elements. The computational procedure can be conveniently divided into three distinct steps. The first step involves the generation of various-order perturbation vectors, and their derivatives with respect to the material and lamination parameters of the frame, using the Linstedt-Poincare perturbation technique. The second step consists of using the perturbation vectors as basis vectors, computing the amplitudes of these vectors and the nonlinear frequency of vibration, via a direct variational procedure. The third step consists of using the perturbation vectors, and their derivatives, as basis vectors and computing the sensitivity coefficients of the nonlinear frequency via a second application of the direct variational procedure. Numerical results are presented for semicircular thin-walled frames with I and J section, showing the convergence of the nonlinear frequency and the sensitivity coefficients obtained by both the reduced-basis and perturbation techniques.

Description: The soft gamma-ray telescope (35-1300 keV) SIGMA aboard the high energy GRANAT space observatory has been monitoring the Galactic Bulge region for more than 2000 h of effective time since March 1990. In the resulting average 35-75 keV image we detected ten sources at a level of greater than 5 standard deviations, 6 of which can be identified with low mass X-ray binaries (LMXB). Among them, one is the 1993 X-ray nova in Ophiuchus (GRS 1726-249), one is an X-ray pulsar (GX 1+4), two are associated with X-ray bursters (GX 354-0 and A 1742-294) and two with bursting X-ray binaries in the globular clusters Terzan 2 and Terzan 1. Their spectral and long term variability behavior as measured by SIGMMA are presented and discussed.

Description: The energetic Gamma Ray Experiment Telescope (EGRET) on the Compton Gamma Ray Observatory (CGRO) has the capability of exploring the high energy plasma gamma ray range from approximately 30 MeV to 30 GeV with a sensitivity considerably greater than earlier gamma-ray satellite telescopes. The dominant radiation from the high energy gamma ray sky is the diffuse radiation along the galactic plane. Thus far, five pulsars have been detected and their properties measured. The high energy gamma rays appear to be an increasing fraction of the total emitted electromagnetic radiation as the age of the pulsar increases up to one million years. Observations of one solar flare event showed that there was strong evidence for long-term trapping of relativistic solar nuclei in the solar vicinity for at least 10 hours. Regarding the gamma ray bursts of unknown origin, high energy gamma rays have been seen following a burst for over an hour, with energies in the GeV range and even higher in the case of two individual gamma rays. The observation of the Small Magellanic Cloud appears to answer finally the long open question of whether the bulk of the cosmic rays are galactic or pervade some much larger volume on the side of their being galactic. Over 30 Active Galactic Nuclei (AGN's) have been seen in high energy gamma rays with high probability thus far including quasars and BL Lac objects, but no Seyfert galaxies. Time variations have been detected in many of these AGN's.

Description: Comets in our solar system appear to have provided a bridge between the cold, volatile-rich outer solar system, and the warm, but volatile-poor inner solar system. Excluding tidal and possible extinct radionuclide heating sources, only in the inner solar system are temperatures high enough for liquid water, and therefore life as we know it, to exist for times comparable to the age of the solar system. Comets may have been crucial for providing biogenic volatiles and perhaps organic molecules to this warm environment. It is therefore interesting from an exobiological point of view to ask if comets exist in other planetary systems. Most attempts to detect comets around other stars or in interstellar space have failed. However, there is growing spectroscopic evidence for comet-like bodies orbiting the star Beta Pictoris.

Description: We have mapped the central 2 min (5 pc) of the Galaxy with 4 sec resolution at 30 microns, using the MSFC bolometer array on the NASA Infrared Telescope Facility at Mauna Kea. Complementary maps at 10 and 20 microns covering the same region were obtained contemporaneously with the same instrumentation. The maps encompass both the central cavity at the very center of the Galaxy and the disk of gas and dust which surrounds it. Our data show thermal emissions from dust particles within the cavity and - for the first time at this resolution - within the disk itself. The emission peaks at the position of IRS1 at all three wavelengths, and the 20/30 micron brightness ratio falls uniformly from this peak toward the outer regions of the source. The 30 micron emission correlates well with the HCN emission in the southwest portion of the circumnuclear disk and with the (O I) emission in the north. No feature is apparent at the position of SgrA at any of the three wavelengths. The circumnuclear disk was discovered from the KAO and has been extensively studied in both continuum and line emission in numerous subsequent flights. The poster will attempt to show how these latest ground-based observations intersect and build upon these airborne investigations.

Description: A computational strategy is presented for calculating sensitivity coefficients for the nonlinear large-deflection and postbuckling responses of laminated composite structures on distributed-memory parallel computers. The strategy is applicable to any message-passing distributed computational environment. The key elements of the proposed strategy are: (1) a multiple-parameter reduced basis technique; (2) a parallel sparse equation solver based on a nested dissection (or multilevel substructuring) node ordering scheme; and (3) a multilevel parallel procedure for evaluating hierarchical sensitivity coefficients. The hierarchical sensitivity coefficients measure the sensitivity of the composite structure response to variations in three sets of interrelated parameters; namely, laminate, layer and micromechanical (fiber, matrix, and interface/interphase) parameters. The effectiveness of the strategy is assessed by performing hierarchical sensitivity analysis for the large-deflection and postbuckling responses of stiffened composite panels with cutouts on three distributed-memory computers. The panels are subjected to combined mechanical and thermal loads. The numerical studies presented demonstrate the advantages of the reduced basis technique for hierarchical sensitivity analysis on distributed-memory machines.

Description: A reduction technique and a computational procedure are presented for predicting the tire contact response and evaluating the sensitivity coefficients of the different response quantities. The sensitivity coefficients measure the sensitivity of the contact response to variations in the geometric and material parameters of the tire. The tire is modeled using a two-dimensional laminated anisotropic shell theory with the effects of variation in geometric and material parameters, transverse shear deformation, and geometric nonlinearities included. The contact conditions are incorporated into the formulation by using a perturbed Lagrangian approach with the fundamental unknowns consisting of the stress resultants, the generalized displacements, and the Lagrange multipliers associated with the contact conditions. The elemental arrays are obtained by using a modified two-field, mixed variational principle. For the application of the reduction technique, the tire finite element model is partitioned into two regions. The first region consists of the nodes that are likely to come in contact with the pavement, and the second region includes all the remaining nodes. The reduction technique is used to significantly reduce the degrees of freedom in the second region. The effectiveness of the computational procedure is demonstrated by a numerical example of the frictionless contact response of the space shuttle nose-gear tire, inflated and pressed against a rigid flat surface.

Description: Analytic three-dimensional solutions are presented for the coupled thermoelectroelastic response of multilayered hybrid composite plates. The plates consist of a combination of fiber-reinforced cross-ply and piezothermoelastic layers. Both the thermoelectroelastic static response and its sensitivity coefficients are computed. The sensitivity coefficients measure the sensitivity of the response to variations in different mechanical, thermal and piezoelectric material properties of the plate. A linear constitutive model is used, and the material properties are assumed to be independent of the temperature and the electric field. The plates are assumed to have rectangular geometry and special material symmetries. A mixed formulation is used with the fundamental unknowns consisting of the three transverse stress components; three displacement components; transverse component of the electric displacement field; electric potential; transverse heat flux component, and temperature change. Each of the fundamental unknowns is expressed in terms of a double Fourier series in the Cartesian surface coordinates. A state space approach is used to generate the static response and to evaluate the sensitivity coefficients. Extensive numerical results are presented showing the effects of variation in the geometric parameters of the plate on the different response quantities and their sensitivity coefficients.

Description: A computational procedure is presented for evaluating the sensitivity coefficients of the static frictional contact response of axisymmetric composite structures. The structures are assumed to consist of an arbitrary number of perfectly bonded homogeneous anisotropic layers. The material of each layer is assumed to be hyperelastic, and the effect of geometric nonlinearity is included. The sensitivity coefficients measure the sensitivity of the response variations in different material, lamination and geometric parameters of the structure. A displacement finite element model is used for the discretization. The normal contact conditions are incorporated into the formulation by using a perturbed Lagrangian approach with the fundamental unknowns consisting of nodal displacements, and Lagrange multipliers associated with the contact conditions. The Lagrange multipliers are allowed to be discontinuous at interelement boundaries. Tangential contact conditions are incorporated by using a penalty method in conjunction with the classical Coulomb's friction model. The Newton-Raphson iterative scheme is used for the solution of the resulting nonlinear algebraic equations, and for the determination of the contact region, contact conditions (sliding or sticking), and the contact pressures. The sensitivity coefficients are evaluated by using a direct differentiation approach. Numerical results are presented for the frictional contact of a composite spherical cap pressed against a rigid plate.

Description: The results of a study of the detailed thermomechanical postbuckling response characteristics of flat unstiffened composite panels with central circular cutouts are presented. The panels are subjected to combined temperature changes and applied edge loading (or edge displacements). The analysis is based on a first-order shear deformation plate theory. A mixed formulation is used with the fundamental unknowns consisting of the generalized displacements and the stress resultants of the plate. The postbuckling displacements, transverse shear stresses, transverse shear strain energy density, and their sensitivity coefficients are evaluated. The sensitivity coefficients measure the sensitivity of the post-buckling response to variations in the different lamination and material parameters of the panel. Numerical results are presented showing the effects of the variations in the hole diameter, laminate stacking sequence, fiber orientation, and aspect ratio of the panel on the thermomechanical postbuckling response and its sensitivity to changes in panel parameters.

Description: A study is made of the effect of mesh distortion on the accuracy of transverse shear stresses and their first-order and second-order sensitivity coefficients in multilayered composite panels subjected to mechanical and thermal loads. The panels are discretized by using a two-field degenerate solid element, with the fundamental unknowns consisting of both displacement and strain components, and the displacement components having a linear variation throughout the thickness of the laminate. A two-step computational procedure is used for evaluating the transverse shear stresses. In the first step, the in-plane stresses in the different layers are calculated at the numerical quadrature points for each element. In the second step, the transverse shear stresses are evaluated by using piecewise integration, in the thickness direction, of the three-dimensional equilibrium equations. The same procedure is used for evaluating the sensitivity coefficients of transverse shear stresses. Numerical results are presented showing no noticeable degradation in the accuracy of the in-plane stresses and their sensitivity coefficients with mesh distortion. However, such degradation is observed for the transverse shear stresses and their sensitivity coefficients. The standard of comparison is taken to be the exact solution of the three-dimensional thermoelasticity equations of the panel.

Description: A study is made of the buckling and postbuckling responses of flat, unstiffened composite panels subjected to various combinations of mechanical and thermal loads. The analysis is based on a first-order shear deformation von Karman-type plate theory. A mixed formulation is used with the fundamental unknowns consisting of the strain components, stress resultants and the generalized displacements of the plate. The stability boundary, postbuckling response and the sensitivity coefficients are evaluated. The sensitivity coefficients measure the sensitivity of the buckling and postbuckling responses to variations in the different lamination and material parameters of the panel. Numerical results are presented for both solid panels and panels with central circular cutouts. The results show the effects of the variations in the fiber orientation angels, aspect ratio of the panel, and the hole diameter (for panels with cutouts) on the stability boundary, postbuckling response and sensitivity coefficients.

Description: A study is made of the accuracy of the steady-state (static) thermoelectroelastic response of multilayered hybrid composite plates predicted by five modeling approaches, based on two-dimensional plate theories. The plates consist of a combination of fiber-reinforced and piezothermoelastic layers. The standard of comparison is taken to be the exact three-dimensional thermoelectroelastic solutions, and the quantities compared include gross response characteristics (e.g., strain energy components, and average through-the-thickness displacements); detailed, through-the-thickness distributions of displacements and stresses; and sensitivity coefficients of the response quantities (derivatives of the response quantities with respect to material parameters of the plate). The modeling approaches considered include first-order theory; third-order theory; discrete-layer theory (with piecewise linear variation of the in-plane displacements, temperature and electric potential, in the thickness direction); and two predictor-corrector procedures.

Description: A computational procedure is presented for evaluating the sensitivity coefficients of the dynamic axisymmetric, fully-coupled, thermoviscoplastic response of shells of revolution. The analytical formulation is based on Reissner's large deformation shell theory with the effects of large-strain, transverse shear deformation, rotatory inertia and moments turning around the normal to the middle surface included. The material model is chosen to be viscoplasticity with strain hardening and thermal hardening, and an associated flow rule is used with a von Mises effective stress. A mixed formulation is used for the shell equations with the fundamental unknowns consisting of six stress resultants, three generalized displacements and three velocity components. The energy-balance equation is solved using a Galerkin procedure, with the temperature as the fundamental unknown. Spatial discretization is performed in one dimension (meridional direction) for the momentum and constitutive equations of the shell, and in two dimensions (meridional and thickness directions) for the energy-balance equation. The temporal integration is performed by using an explicit central difference scheme (leap-frog method) for the momentum equation; a predictor-corrector version of the trapezoidal rule is used for the energy-balance equation; and an explicit scheme consistent with the central difference method is used to integrate the constitutive equations. The sensitivity coefficients are evaluated by using a direct differentiation approach. Numerical results are presented for a spherical cap subjected to step loading.

Description: The results of a detailed study of the buckling and postbuckling responses of composite panels with central circular cutouts are presented. The panels are subjected to combined edge shear and temperature change. The panels are discretized by using a two-field degenerate solid element with each of the displacement components having a linear variation throughout the thickness of the panel. The fundamental unknowns consist of the average mechanical strains through the thickness and the displacement components. The effects of geometric nonlinearities and laminated anisotropic material behavior are included. The stability boundary, postbuckling response and the hierarchical sensitivity coefficients are evaluated. The hierarchical sensitivity coefficients measure the sensitivity of the buckling and postbuckling responses to variations in the panel stiffnesses, and the material properties of both the individual layers and the constituents (fibers and matrix). Numerical results are presented for composite panels with central circular cutouts subjected to combined edge shear and temperature change, showing the effects of variations in the hole diameter, laminate stacking sequence and fiber orientation, on the stability boundary and postbuckling response and their sensitivity to changes in the various panel parameters.

Description: A hybrid neurocomputing/numerical strategy is presented for geometrically nonlinear analysis of structures. The strategy combines model-free data processing capabilities of computational neural networks with a Pade approximants-based perturbation technique to predict partial information about the nonlinear response of structures. In the hybrid strategy, multilayer feedforward neural networks are used to extend the validity of solutions by using training samples produced by Pade approximations to the Taylor series expansion of the response function. The range of validity of the training samples is taken to be the radius of convergence of Pade approximants and is estimated by setting a tolerance on the diverging approximants. The norm of residual vector of unbalanced forces in a given element is used as a measure to assess the quality of network predictions. To further increase the accuracy and the range of network predictions, additional training data are generated by either applying linear regression to weight matrices or expanding the training data by using predicted coefficients in a Taylor series. The effectiveness of the hybrid strategy is assessed by performing large-deflection analysis of a doubly-curved composite panel with a circular cutout, and postbuckling analyses of stiffened composite panels subjected to an in-plane edge shear load. In all the problems considered, the hybrid strategy is used to predict selective information about the structural response, namely the total strain energy and the maximum displacement components only.

Description: Three recent developments in the sensitivity analysis for thermomechanical postbuckling response of composite panels are reviewed. The three developments are: (1) effective computational procedure for evaluating hierarchical sensitivity coefficients of the various response quantities with respect to the different laminate, layer, and micromechanical characteristics; (2) application of reduction methods to the sensitivity analysis of the postbuckling response; and (3) accurate evaluation of the sensitivity coefficients to transverse shear stresses. Sample numerical results are presented to demonstrate the effectiveness of the computational procedures presented. Some of the future directions for research on sensitivity analysis for the thermomechanical postbuckling response of composite and smart structures are outlined.

Description: A computational procedure is presented for evaluating the sensitivity coefficients of the viscoplastic response of structures subjected to dynamic loading. A state of plane stress is assumed to exist in the structure, a velocity strain-Cauchy stress formulation is used, and the geometric non-linearities arising from large strains are incorporated. The Jaumann rate is used as a frame indifferent stress rate. The material model is chosen to be isothermal viscoplasticity, and an associated flow rule is used with a von Mises effective stress. The equations of motion emanating from a finite element semi-discretization are integrated using an explicit central difference scheme with an implicit stress update. The sensitivity coefficients are evaluated using a direct differentiation approach. Since the domain of integration is the current configuration, the sensitivity coefficients of the spatial derivatives of the shape functions must be included. Numerical results are presented for a thin plate with a central cutout subjected to an in-plane compressive loading. The sensitivity coefficients are generated by evaluating the derivatives of the response quantities with respect to Young's modulus, and two of the material parameters characterizing the viscoplastic response. Time histories of the response and sensitivity coefficients, and spatial distributions at selected times are presented.

Description: Analytic three-dimensional thermoelasticity solutions are presented for static problems of simply supported sandwich panels and cylindrical shells subjected to mechanical and thermal loads. The panels and shells have laminated composite face sheets of arbitrary thickness separated by a core. Each of the individual layers of the face sheets and the core is modeled as a three-dimensional continuum. Analytic first-order sensitivity coefficients are evaluated to assess the sensitivity of the responses to variations in material parameters of the face sheets and the core, as well as to variations in the curvatures and thicknesses of the sandwich and face sheets. Also, the strain energy associated with various stress components in the face sheets and core are calculated and compared. The information obtained in the present study can aid the development and assessment of two-dimensional models for sandwich structures and illuminate the role of particular material parameters in an equivalent model for the core.

Description: Three stiffened panel concepts are evaluated to find optimized designs for integral stiffeners in the barrels of Reusable Launch Vehicle fuel tanks. The three panel concepts considered are a T-stiffened panel, a panel with one blade stiffener centered between each pair of T-stiffeners, and a panel with two blade stiffeners equally spaced between each pair of T-stiffeners. The panels are optimized using PASCO for a range of compressive loads, and the computed areal weight for each panel is used to compare the concepts and predict tank weights. The areal weight of the T-stiffened panel with one blade is up to seven-percent lower than the other panel concepts. Two tank construction methods are compared for a representative tank design with three barrels. In the first method, 45-degree circumferential sections of a barrel are each designed to carry the same maximum load in the barrel. In the second method, each barrel section is designed for the maximum load in that section. Representative tanks designed with the first method are over 250 lb heavier than tanks designed using the second method. Optimized panel designs and areal weights are also computed for variation of the nominal panel length and skin thickness.

Description: The results of UV observations taken with the International Ultraviolet Explorer (IUE) satellite and microwave observations obtained with the Australia Telescope during an observing campaign of the rapidly rotating K0 dwarf star HD 197890, nicknamed 'Speedy Mic' are presented. This star was recently recognized as a powerful, transient EUV source by the ROSAT WFC, and subsequent investigation showed it to be a ZAMS or possibly a PMS dwarf which may be a member of the Local Association. Our observations show it to have strong, variable UV emission lines near the 'saturation' levels. The radio observations show a level of 'quiescent' emission consistent with other rapidly rotating stars, but there is no evidence for the large flux variations that normally characterize the time history of such objects.

Description: A parametric study is presented of the buckling behavior of infinitely long symmetrically laminated anisotropic plates subjected to combined loads. The study focuses on the interaction of a subcritical (stable) secondary loading state of constant magnitude and a primary destabilizing load that is increased in magnitude until buckling occurs. The loads, considered in this report are uniform axial compression, pure in-plane bending, transverse tension and compression, and shear. Results are presented that were obtained by using a special purpose nondimensional analysis that is well suited for parametric studies of clamped and simply supported plates. In particular, results are presented for a +/- 45(sub S) graphite-epoxy laminate that is highly anisotropic and representative of a laminate used for spacecraft applications. In addition, generic buckling-design charts are presented for a wide range of nondimensional parameters that are applicable to a broad class of laminate constructions. These results show the general behavioral trends of specially orthotropic plates and the effects of flexural anisotropy on plates subjected to various combined loading conditions. An important finding of the present study is that the effects of flexural anisotropy on the buckling resistance of a plate can be significantly more important for plates subjected to combined loads than for plates subjected to single-component loads.

Description: This document contains presentations and discussions from the joint UVA/NASA Workshop on Computational Modeling of Tires. The workshop attendees represented NASA, the Army and Air force, tire companies, commercial software developers, and academia. The workshop objectives were to assess the state of technology in the computational modeling of tires and to provide guidelines for future research.