ALBERT

Notes: Abstract Characteristic features of in situ diamonds can be used to retrace diamond formation during ultrahigh pressure (UHP) metamorphism of the Kokchetav Massif, Kazakhstan. These features include the nitrogen aggregation state in diamond, dissolution features observed on diamond surfaces, and the carbon and nitrogen isotopic composition of the diamonds. The minerals in which the diamonds are included provide additional information and support the view that at least some of the Kokchetav microdiamonds are the products of prograde or peak UHP metamorphism. The coexistence of diamond and graphite is evaluated within this framework.

Notes: Geologic mapping and subsurface lithostratigraphic investigations were carried out in the Khao Pun area (4 km2), central Thailand. More than 250 hand specimens, 70 rock slabs, and 70 thin sections were studied in conjunction with geochemical data in order to elucidate paleoenvironments and tectonic setting of the Permian marine sedimentary sequences. This sedimentary succession (2485 m thick) was re-accessed and re-grouped into three lithostratigraphic units, namely, in ascending order, the Phu Phe, Khao Sung and Khao Pun Formations. The Lower to lower Upper Permian sedimentary facies indicated the transgressive/regressive succession of shelf sea/platform environment to pelagic or abyssal environment below the carbonate compensation depth. The sedimentological and paleontological aspects, together with petrochemical and lithological points of view, reveal that the oldest unit might indicate an Early Permian sheltered shallow or lagoonal environment. Then the depositional basin became deeper, as suggested by the prolonged occurrence of bedded chert-limestone intercalation with the local exposure of shallower carbonate build-up. Following this, the depositional environment changed to pelagic deposition, as indicated by laminated radiolarian (e.g. Follicucullus sp.) cherts. This cryptic evidence might indicate the abyssal environment during middle Middle to early Late Permian; whereas, previous studies advocated shelf-facies environments. Following this, the depositional condition might be a major regression on the microcontinent close to Indochina, from the minor transgressive/regressive cycles that developed within a skeletal barrier, and through the lagoon with limited circulational and anaerobic conditions, on to the tidal flat to the sheltered lagoon without effective land-derived sediments.

Notes: The Akan-Shiretoko volcanic chain, situated in the Southwestern Kurile arc, consists mainly of nine subaerial andesitic stratovolcanoes and three calderas. The chain extends in a SW–NE direction for 200 km, situated oblique to the Kurile trench at an angle of 25 degrees. Thirty-seven new K–Ar ages, plus previous data, suggest that volcanic activity along the Akan-Shiretoko volcanic chain began at ca 4 Ma at Akan, at the southwestern end of the chain, and systematically progressed northeastward, resulting in the southwest-northeast-trending volcanic chain. This spatial and temporal distribution of volcanoes can be explained by anticline development advancing northeastward from the Akan area, accompanied by magma rising through northeast-trending fractures that developed along the anticlinal axis. The northeastward development of the anticline caused uplifting of the Akan-Shiretoko area and changed the area from submarine to subaerial conditions. Anticline formation was likely due to deformation of the southwestern Kurile arc, with southwestward migration of the Kurile forearc sliver caused by oblique subduction of the Pacific plate. The echelon topographic arrangement of the Shiretoko, Kunashiri, Etorofu and Urup was formed at ca 1 Ma.

Notes: The Cretaceous accretionary complexes of the Idonnappu Zone in the Urakawa area are divided into five lithological units, four of which contain greenstone bodies. The Lower Cretaceous Naizawa Complex consists of two lithologic units. The Basaltic Unit (B-Unit) is a large-scale tectonic slab of greenstone, consisting of depleted tholeiite similar to that of the Lower Sorachi Ophiolite (basal forearc basin ophiolite) in the Sorachi-Yezo Belt. The Mixed Unit of Naizawa Complex (MN-Unit) contains oceanic island-type alkaline greenstones which occur as slab-like bodies and faulted blocks with tectonically dismembered trench-fill sediments. Repeated alternations of the two units in the Naizawa Complex may have been formed by the collision of seamounts with forearc ophiolitic body (Lower Sorachi Ophiolite) in the trench. The Upper Cretaceous Horobetsugawa Complex structurally underlies the Naizawa Complex in its original configuration, and it also contains greenstone bodies. Greenstones in the MH-Unit occur as blocks and sedimentary clasts in a clastic matrix, and exhibit depleted tholeiite and oceanic-island alkaline basalt/tholeiite chemistry. This unit is interpreted as submarine slide and debris flow deposits. Greenstones in the PT-Unit occur at the base of several chert-clastic successions. Most of the greenstones are severely sheared and show normal-type mid-ocean ridge basalt composition. The PT-Unit greenstones are considered to have been derived from abyssal basement peeled off during accretion. The different accretion mechanism of the greenstones in the Naizawa and Horobetsugawa complexes reflects temporal changes in subduction zone conditions. Seamount accretion and tectonic erosion were dominant in the Early Cretaceous, due to highly oblique subduction of the old oceanic crust and minimal sediment supply. Whereas, thick sediments with minor mid-ocean ridge basalt and olistostrome accreted in the Late Cretaceous, due to near-orthogonal subduction of young oceanic crust with voluminous sediment supply.

Notes: Abstract Rb–Sr and Sm–Nd isochron ages were determined for whole rocks and mineral separates of hornblende-gabbros and related metadiabases and quartz-diorite from Shodoshima, Awashima and Kajishima islands in the Ryoke plutono-metamorphic belt of the Setouchi area, Southwest Japan. The Rb–Sr and Sm–Nd whole-rock-mineral isochron ages for six samples range from 75 to 110 Ma and 200–220 Ma, respectively. The former ages are comparable with the Rb–Sr whole-rock isochron ages reported from neighboring Ryoke granitic rocks and are thus due to thermal metamorphism caused by the granitic intrusions. On the contrary, the older ages suggest the time of formation of the gabbroic and related rocks. The initial 87Sr/86Sr and 143Nd/144Nd ratios of the gabbroic rocks (0.7070–0.7078 and 0.51217–0.51231 at 210 Ma, respectively) are comparable with those of neighboring late Cretaceous granites and lower crustal granulite xenoliths from Cenozoic andesites in this region. Because the gabbroic rocks are considered to be fragments of the lower crustal materials interlayered in the granulitic lower crust, their isotopic signature has been inherited from an enriched mantle source or, less likely, acquired through interaction with the lower crustal materials. The Sr and Nd isotopic and petrologic evidence leads to a plausible conclusion that the gabbroic rocks have formed as cumulates from hydrous mafic magmas of light rare earth element-rich (Sm/Nd 〈 0.233) and enriched isotopic (ɛSr 〉 0 and ɛNd 〈 0) signature, which possibly generated around 220–200 Ma by partial melting of an upper mantle. We further conclude that they are fragments of refractory material from the lower crust caught up as xenoblocks by granitic magmas, the latter having been generated by partial melting of granulitic lower crustal material around 100 Ma.

Notes: Abstract Greenstones, representing remnants of paleo-oceanic crust, occur in Permian and Jurassic accretionary complexes of the Inner Zone in the Southwestern Japan arc. The formation age of most of the greenstones is early Carboniferous, based on fossil ages for overlying limestones and Sm-Nd isotope ages of the greenstones themselves. The geochemistry of such greenstones is similar to those of present-day oceanic islands. Greenstones of the Permian accretionary complex (Akiyoshi belt) are alkalic and tholeiitic in composition. Some alkali basalts show peculiar features from an EM-1 mantle source, such as the Gough Island and Tristan da Chunha basalts in the South Atlantic. Greenstones of the Jurassic accretionary complex (Tamba belt) are also alkali and tholeiitic basalts with both basalt types in the northern part of the Tamba belt coming from strongly depleted characters similar to a mid-ocean ridge basalt source mantle. The variable geochemistry of the oceanic basalts is explained by hypothesis on existence of a Carboniferous mantle plume below the spreading ridge which divides the Farallon and Izanagi plates. The Akiyoshi belt seamounts and/or oceanic islands of the Farallon plate and Tamba belt seamounts and/or oceanic islands of the Izanagi plate formed simultaneously by the upwelling of the thermal plume. Some part of the Akiyoshi belt basalts originated locally from an EM-1 mantle source, while basalts from the northern parts of the Tamba belt have a normal-type mid-ocean ridge basalt (N-MORB) source component. Existence of an N-MORB signature is consistent with the presence of a spreading center in a Carboniferous ‘Pacific Ocean’ that caused separation of the Farallon and Izanagi plates. Disparity in accretion ages of the basaltic rocks in the Permian and Jurassic may have been caused by differences in the relative motion of the two plates.

Notes: Abstract The Wakino Subgroup is a lower stratigraphic unit of the Lower Cretaceous Kanmon Group. Previous studies on provenance of Wakino sediments have mainly concentrated on either petrography of major framework grains or bulk rock geochemistry of shales. This study addresses the provenance of the Wakino sandstones by integrating the petrographic, bulk rock geochemistry, and mineral chemistry approaches. The proportions of framework grains of the Wakino sandstones suggest derivation from either a single geologically heterogeneous source terrane or multiple source areas. Major source lithologies are granitic rocks and high-grade metamorphic rocks but notable amounts of detritus were also derived from felsic, intermediate and mafic volcanic rocks, older sedimentary rocks, and ophiolitic rocks. The heavy mineral assemblage include, in order of decreasing abundance: opaque minerals (ilmenite and magnetite with minor rutile), zircon, garnet, chromian spinel, aluminum silicate mineral (probably andalusite), rutile, epidote, tourmaline and pyroxene. Zircon morphology suggests its derivation from granitic rocks. Chemistry of chromian spinel indicates that the chromian spinel grains were derived from the ultramafic cumulate member of an ophiolite suite. Garnet and ilmenite chemistry suggests their derivation from metamorphic rocks of the epidote-amphibolite to upper amphibolite facies though other source rocks cannot be discounted entirely. Major and trace element data for the Wakino sediments suggest their derivation from igneous and/or metamorphic rocks of felsic composition. The major element compositions suggest that the type of tectonic environment was of an active continental margin. The trace element data indicate that the sediments were derived from crustal rocks with a minor contribution from mantle-derived rocks. The trace element data further suggest that recycled sedimentary rocks are not major contributors of detritus. It appears that the granitic and metamorphic rocks of the Precambrian Ryongnam Massif in South Korea were the major contributors of detritus to the Wakino basin. A minor but significant amount of detritus was derived from the basement rocks of the Akiyoshi and Sangun Terrane. The chromian spinel appears to have been derived from a missing terrane though the ultramafic rocks in the Ogcheon Belt cannot be discounted.

Notes: Abstract  On the island of Mustique, fresh and propylitized olivine–plagioclase–clinopyroxene basalt, plagioclase–clinopyroxene–orthopyroxene and plagioclase–clinopyroxene–amphibole andesite lavas and minor intrusions are interbedded with Oligocene pyroclastic and epiclastic rocks. Chemical data show that two isotopically identical, but chemically different, suites of lava are present: (i) the OPXS (87Sr/86Sr 0.70403–0.70454; 143Nd/144Nd 0.512952–0.512986; δ18Ocpx 5.49 and 5.61), comprising basalts and orthopyroxene-bearing andesites; and (ii) the AMPHS (87Sr/86Sr 0.70401–0.70457; 143Nd/144Nd 0.512981–0.513037; δ18Ocpx 5.54), made up of basalts and amphibole-bearing andesites. The OPXS has higher contents of TiO2, P2O5, light rare earth elements, Sm, Pb, Th, U, Zr, Y and Nb, and higher La/Yb ratios than the AMPHS. The isotopic data suggest that both suites formed from melts derived from the same subduction-modified depleted mantle source as the volcanic rocks of nearby St Vincent and Bequia, and the northern islands of the Lesser Antilles Arc. The immobile trace element contents, and La/Yb ratios, of the OPXS are indicative of ∼10% partial melting of the source, whereas those of the AMPHS are indicative of ∼25% partial melting. The within-suite chemical variation of the OPXS is consistent with ∼45% fractional crystallization of its intratelluric mineral assemblages, and that of the AMPHS is consistent with the removal of ∼65% of its intratelluric assemblages. Experimental evidence suggests that both suites of basalt crystallized at pressures 〈8 kbar from melts containing 1–2 wt% water. After extensive fractional crystallization, the andesites crystallized at pressures between approximately 5 and 2 kbar. The OPXS magmas appear to have lost more of their water content than the AMPHS magmas. Thus, the OPXS andesites formed from melts with an estimated water content of 2–3 wt%, whereas the AMPHS andesites formed from melts containing at least 4.5 wt% water.

Notes: Abstract  Ground penetrating radar (GPR) and high-resolution shallow reflection seismic surveying were carried out to investigate the subsurface geology in and around the Uemachi Fault zone in the Yamato River area, Osaka, Japan. Shallow drilling in the area showed a major displacement event during the middle Pleistocene. The main Uemachi Fault plane could be clearly imaged on the seismic section, except for the most shallow 200 m. Several shallow normal fault planes with less displacement could be detected on both sides of the fault plane. GPR profiles confirmed the presence of several shallow normal faults within the area near the fault zone. These shallow faults could be followed in all of the GPR profiles crossing the fault zone. The integration of seismic section, GPR profiles and drilling data led to a conceptual model that explains the evolution of the Uemachi Fault system. The proposed model suggests the occurrence of several cycles of small vertical displacement along the deep part of the fault plane caused by the regional east–west compressional stress. The ductile nature of the shallow sedimentary cover and the absence of confining pressure in the shallow part allow for a considerable amount of plastic bending before failing in the shallow sedimentary layers. This bending generates stretching force within the shallow sedimentary cover, which in time, along with gravitational force, gives rise to the formation of the swarm of normal faults within the shallow layers near the fault zone. Some of the detected faults extend to a depth of less than 3 m below the ground surface, suggesting that the last tectonic activity along the fault plane may have occurred recently.