ALBERT

Notes: The paper traces the history of the Wild series of rectifiers, paying particular attention to the mechanical solutions of the Newton and Scheimpflug conditions.

Notes: This paper gives a summary of the methods that have been used for independent model aerial triangulation. A modification of one of the methods is proposed and the paper concludes with a comparison of the independent model with the classical method of triangulation.

Notes: The camera is a further development of an existing type with greatly improved photogrammetric performance so that the photography can be used with first-order plotting machines. A new lens provides minimal distortion, high resolution and greatly improved marginal illumination. An entirely new shutter provides high speeds and efficiency. Laboratory results and preliminary survey trials indicate image quality and location standards of the same order as established existing cameras.

Notes: Book reviews in this article:INTERNATIONAL YEAR BOOK OF CARTOGRAPHY (Vol. IV, 1964). Editor, Eduard Imhof.JUBILEE VOLUME DEDICATED TO WILLEM SCHERMERHORN ON HIS SEVENTIETH ANNIVERSARY: ESSAYS ON THE DEVELOPMENT OF PHOTOGRAMMETRY. Published by I.T.C., Delft.

Notes: This short note sets out a personal experience of the transition from an academic environment to the great wide world of marketing and discusses some of the similarities and differences between the two.

Notes: In order to realise the full potential of photogrammetry for national map revision, photographic acquisition lead times and, where possible, costs must be significantly reduced. In this paper a review of alternative platform and camera configurations is made and tests are undertaken utilising simulated data and medium format data taken from an existing project. The results suggest that the medium format camera and helicopter combination may have much to offer while the small format camera and microlight aircraft systems have yet to be developed into an effective data acquisition and map compilation system.

Notes: The author draws attention to the public nature of an archive compared with the privacy of a collection in the commercial sector. He emphasises the nature of copyright as it affects the products of his own company and explains some of the characteristic features of a commercial operation involved in the acquisition and supply of aerial photography.

Notes: A previous paper (Gugan, 1987) described the geometric model used to find the exterior orientation of dynamic SPOT imagery. The present paper considers the results of measurement and interpretation tests performed on a number of stereomodels. The image quality is assessed in comparison with the original digital data. Level 1A stereomodels with different base height ratios, numbers of control points and with different control point accuracies are compared. Accuracies obtained with level 1P and 1B data are also reported. The information content of the imagery is assessed by feature plotting followed by comparison with the 1:50 000 and 1:100 000 scale maps of the area. The importance of high quality photographic imagery and operator experience are noted.

Notes: Work is reported on the production of terrain elevation data from SPOT imagery. An important step in this process is determination of exterior orientation parameters for the images. Although an initial estimate is available in the SPOT header, refinements are required based on plan and height data. These are generally derived from photogrammetric measurements (or sources such as global positioning satellite systems), but accurate manual determination is time consuming.This paper reports an alternative approach by investigating the use of existing map data (located on the earth's surface and in a known projection) to find corresponding “ground control points” in both map and image. Available maps may be in digital or paper form depending on the state of development of mapping in the part of the world being studied. The last revision date and the cartographic generalisation employed will also effect the fidelity of the final result. Practical semi-automatic techniques for determining the height of ground control points from existing map data are described, including multiple profiles through digitised contour data, a commercial terrain modelling package based on Delaunay triangulation and the use of triangulation points on prominent features.Comparisons between the methods are made and results obtained are compared with Institut Géographique National datasets and photogrammetric measurements. Methods for fully automating not only the height determination but also the location of ground control features within a map database are discussed. Map and image registration is described and illustrated using Laser-Scan's Rover software. Interactive and automated methods of registration are discussed.

Notes: The Overseas Surveys Directorate (OSD) of the Ordnance Survey of Great Britain (OS) has experimented with using SPOT I HRV data for topographic line mapping at 1:100 000 scale in the Yemen Arab Republic (YAR). Results of these tests indicate that sufficient accuracy to support 1:100 000 scale mapping with a 40 m contour interval is possible but that the compilation of detail is incomplete. More emphasis on field completion and verification is required than with traditional techniques to maintain a standard 1:100 000 scale mapping specification. Costs of mapping large areas can be significantly reduced but savings are yet to be made in providing ground control. OSD has acquired expertise and hardware in a new mapping process, not to replace traditional mapping systems but to complement them under appropriate conditions. OSD has developed sufficient confidence in the use of SPOT to commit itself to mapping approximately 25 000 square kilometres of north east Yemen Arab Republic.

Notes: Bundle triangulation is an efficient tool for spatial point determination in architectural photogrammetry. All the information available in image and object space may be introduced in a combined adjustment yielding high precision and reliability. Camera calibration performed simultaneously with the object restitution process enables the application of convenient and flexible imaging systems based on professional photographic technology. Thus the survey of monuments can be carried out rapidly with a minimum of personnel and equipment. The photogrammetric recording of the basilica of San Francesco in Siena is presented as an example of the application of this survey procedure. The field work was accomplished in a few days. The equipment used consisted of a partial metric camera, an engineering theodolite and a tape. The bundle adjustment results gave spatial object co-ordinates with a r.m.s.e. of ± 15 mm for a point.

Notes: Book review in this aticle:INTRODUCTION TO THE PHYSICS AND TECHNIQUES OF REMOTE SENSING. By C. Elachi.COMPUTER PROCESSING OF REMOTELY-SENSED IMAGES. By P. M. Mather.ARCTIC AIRMEN. B E. Schofield and R. C. Nesbit.WARBURTON'S WAR. The life of Wing Commander Adrian Warburton, DSO and Bar, DFC and Two Bars, DFC (USA). By T. Spooner.MAP PROJECTIONS—A WORKING MANUAL. By. J. P. Snyder.WORLD MAPPING TODAY. By R. B. Parry and C. R. Perkins.CONTROL SURVEYS IN CIVIL ENGINEERING. By M. A. R. Cooper.INTRODUCTION TO REMOTE SENSING. By J. B. Campbell.ANALYTICAL PHOTOGRAMMETRY. By S. K. Ghosh.

Notes: The availability of data in digital formats, the rapid evolution of computer systems and the increased demands for cartographic databases are causing photogrammetrists to consider ways of integrating photogrammetric, remote sensing and database technologies. Examples are presented involving the use of aerial photographs and satellite images in combination with geographical information systems and image processing techniques to assess soil erosion, growth of aquatic vegetation and to enhance satellite images for the compilation or revision of map products.

Notes: Following the installation of the Wildmap digital mapping system, B.K.S. Surveys Ltd. has successfully completed a number of digital mapping projects in Europe, the Middle East and the United States. As a result of experience gained through meeting clients’requirements, carrying out market research and making in house developments the company has updated its original conceptual approach to digital mapping to meet current demands for a land information system. At present B.K.S. is involved in creating a database that is composed of utility, cadastral and topographical data designed for both graphical output and digital processing for resource planning.

Notes: The development and operation of a remote control system for a camera rig and for the camera attached to it are described. Now there is the possibility of reducing the crew from three to two for many tasks and to use the extra payload to collect contemporaneous data using a second airborne system.

Notes: In spite of the striking progress in block adjustment techniques, it is widely assumed that their application continues to be out of reach for a large part of the photogrammetric community that cannot afford expensive computer systems. The COBLO program performs rigorous block adjustment with models and can be implemented even on inexpensive microcomputers. The first COBLO versions are in operation in several places in South America and Europe and the latest versions, which are considerably more efficient, are now being introduced. This paper describes the main features of different COBLO versions and presents the experience of some users.

Notes: In this paper, the author discusses some of his experiences of the past 20 years as a lecturer in photogrammetry and surveying. Comment is made upon the relationship between training and education but with some greater emphasis on the educational topic, and on the role of the lecturer. The final section discusses those elements of a course in photogrammetry which have a strong educational content.

Notes: This paper describes briefly the survey and photogrammetric work carried out for the detailed recording of the Minoan Palace of Cnossos, a project undertaken by a group of three private survey firms (N. Perdikaris, Dimopoulos and Associates and Stambouloglou and Associates) for the Archaeological Service of the Hellenic Ministry of Culture and Science.

Notes: Analytical plumbline and serf calibration techniques are applied to the calibration of two underwater cameras: a Rolleifex SLX réseau camera with an Aquamarin WKD-SLX/6006 submarine housing and a Nikonos V underwater camera. The Rolleiflex was fitted with a 50 mm Distagon f/4 lens and the Nikonos with a 28 mm Nikkor-UW f/3.5 lens. Comparisons of the results from the two methods of camera calibration are described. Theoretical differences are predicted for in-air versus in-water values for radial distortion. When these are compared to the actually observed values of distortion, an insight is provided of the precisions claimed for each method of camera calibration.

Notes: A new lightweight vertical camera rig which can be clamped to the front legs of the front seat of a light aircraft is described. In one version, a fixed transparent fairing is attached to the door, whereas in the second version the fairing is attached to the camera rig itself which can then be extended and retracted in flight. This rig has received C.A.A. (Civil Aviation Authority) Approval.

Notes: SPOT-1, launched on 22nd February, 1986, has provided the first opportunity to produce topographic maps from space on an operational basis. The use of SPOT imagery can be justified because of reduced costs and reduced lead times for map production. However SPOT imagery cannot be handled in the same way as conventional photography and it requires new procedures to be adopted, The two main reasons for this are the large area covered by each image and the dynamic form of sensing. The procedures discussed in this paper have been implemented in a working system for map compilation.

Notes: Three authors, representing commercial, educational and governmental photogrammetric organisations, report on their initial uses of analytical plotters.

Notes: Book reviews in this article:PROCEEDINGS OF THE INTERNATIONAL SYMPOSIUM ON SPACE TECHNIQUES FOR GEODYNAMICS. Edited by J. Somogyi. Hungarian Academy of Sciences. Sopron. Hungary.THE SURVEILLANT SCIENCE: REMOTE SENSING OF THE ENVIRONMENT. Edited by R. K. Holz. Second edition. John Wiley and Sons Ltd., New York and Chichester.DISCOVERY FROM THE AIR. By G. W. G. Allen. Edited by J. S. P. Bradford and O. G. S. Crawford with Introduction and Captions by D. N. Riley. Aerial Archaeology.PRINCIPLES OF REMOTE SENSING. By P. J. Curran. Longman, London and New York.SATELLITE OCEANOGRAPHY. By I. S. Robinson. Ellis Horwood Ltd, Chichester.THE RIGHT OF THE LINE. The Royal Air Force in the European War 1939–1945. By J. Terraine. Hodder & Stoughton, London.INDUSTRIAL HISTORY FROM THE AIR. By K. Hudson. Cambridge University Press, Cambridge.INTRODUCTION TO SATELLITE OCEANOGRAPHY. By G. A. Maul. Martinus Nijhoff, Dordrecht.REMOTE SENSING IN CIVIL ENGINEERING. Edited by T. J. M. Kennie and M. C. Matthews. Blackie and Son Ltd. Surrey University Press, Glasgow and London.

Notes: The use of small computers for on line data processing in photogrammetry has developed from the desktop calculators of the early 1970s to the microcomputers of today. The restrictions of machine code programming, small memory and limited display have been overcome. Software has been written for the PI-1A monocomparator using the BBC microcomputer for a calibration test, relative orientation, and strip formation and adjustment in the on line mode. This low cost system is suitable for training inexperienced operators or students in analytical photogrammetry, with the sequence of observation guided by operator prompts and with error checking computations displayed. Re-observations can be made on line and acceptable observations stored for input to the strip adjustment program or subsequent block adjustment.

Notes: Using modern techniques, the analysis of amateur photographs yields results with almost the same accuracy level as with metric photographs. This paper gives a classification of data processing techniques for amateur photographs and presents a well proven method for the treatment of existing amateur photographs, known as Metric Photo Perspective Transformation (MPPT). Data processing is particularly convenient and efficient if on line techniques are used. Operational procedures for the treatment of additional parameters and for the detection of blunders in a time critical on line triangulation system are proposed.

Notes: Users of photogrammetric data have often been puzzled by conflicting advice given by companies regarding achievable height accuracies which could be expected from varying scales of aerial photography. The author chairs the Photogrammetry Group which is convened under the auspices of the Council of the UK Land and Hydrographic Survey Association (TSA). The first aim of this Group was to establish some common ground among TSA member companies with regard to achievable heighting accuracies. A series of tests was carried out on the most commonly used photographic scales and guidelines were published to clients based on these tests. 〈section xml:id="abs1-2"〉〈title type="main"〉Résumé Les utilisateurs des données photogrammétriques ont été souvent déconcertés par les avis contraires émanant des entreprises concernant les précisions altimétriques accessibles à partir de diverses échelles des photographies aériennes. Dans ce contexte, le Conseil de ľ‘Association britannique des levées terrestres et hydrographiques (TSA) a mis sur pied un Groupe “Photogrammétrie” et en a confié la présidence àľauteur. Le premier objectif de ce Groupe a consistéàétablir des bases communes aux entreprises membres de la TSA, en ce qui concerne les précisions altimétriques réalisables. On a effectué un ensemble ď essais sur les échelles des photographies aériennes les plus communément utilisées et ľ on a publicé, à partir de ces essais un opuscule destinéà guider les clients. 〈section xml:id="abs1-3"〉〈title type="main"〉Zusammenfassung Die Nutzer photogrammetrischer Daten werden oft durch widerspriich-liche Ratschläge der Firmen in bezug auf die bei verschiedenen Bildmaβstäben erreichbare Höhengenauigkeit verwirrt. Der Autor leitet den photogrammetrischen Ausschuβ, der unter Aufsicht des Council des UK Land and Hydrographic Survey Association (TSA) einberufen wurde. Erstes Ziel dieses Gremiums war es, eine gemeinsame Grundlage unter den TSA-Mitgliedsgesellschaften im Hinblick auf erreichbare Höhengenauigkeit zu schaffen. Es wurde eine Reihe von Versuchen zu den am meisten verwendeten Bildmaβstäben durchgeführt, undes wurden daraufberuhende Richtlinien für Kunden veröffentlicht.

Notes: Cartography andphotogrammetry have always been strongly linked and this paper emphasises a view of cartography as a process of spatial data representation, rather than as a method of creating a product, a map. Of course, the definition of cartography must change with developments in its practice. An outline of the historical background to the subject is presented, followed by a consideration of the relationship between the cartographer and the user of the product. The basic problems involved in the transfer of information from the complex real world to a generalized cartographic product are analysed and technological aspects of the discipline are described. Contemporary applications of cartography include hazard mapping, links with GIS, tactile products and electronic hydrographic representation, all of which represent customer driven progress. It is concluded that the future of cartography is, overall, dependent on a graphical representation of high quality being supplied to the end user, rather than on the methods used to attain this objective. 〈section xml:id="abs1-2"〉〈title type="main"〉Résumé La cartographie et la photogramétrie ont toujours été liées étroitement ľune àľautre, et ľ‘on souligne dans cet article ľ‘idée que la cartographie est un systéme de représentation des données à trois dimensions, plutôt qu‘un ensemble de procédés de fabrication ďun produit, la carte. II est évident que la définition de la cartographie doit changer au fur et à mesure que des évolutions apparaissent dans sa pratique. Aprés un aperçu du contexte historique de ce thème, on examine les relations qui se développent entre le cartographe et ľutilisateur du produit. On analyse les problèmes fondamentaux du transfert ďinformations du monde réel, complexe, à un produit cartographique géneralisé et ľ‘on décrit la technologie qu'utilise cette discipline. Les applications récentes de la cartographie concernent la cartographie des risques naturels, les relations avec les SIG, les cartes qui se lisent par le toucher, et la représentation electronique de ľ‘hydrographic produits qui tous sont issus de cheminements pilotés en aval, par le client. On en déduit que la cartographie est, àľ'avenir, par dessus tout fonction ďune represséntation graphique de haute qualityé fournie à un utilisateur final, plutôt que de processus utilisé pour parvenir à cet objectif.〈section xml:id="abs1-3"〉〈title type="main"〉Zusammenfassung Kartographie und Photogrammetrie waren immer eng verbunden, und dieser Beitrag betont starker eine Auffassung von der Kartographie als einem Prozeβ der Darstellung von Raumdaten als ein Verfahren zur Herstellung eines Erzeugnisses, der Karte. Natürlich muβ sich die Definition der Kartographie bei Entwicklungen in ihrer Praxis ändern. Es erfolgt eine Skizzierung des historischen Hintergrundes des Gegenstands, gefolgt von Betrachtungen zur Beziehung zwischen Kartographen und dem Nutzer des Erzeugnisses. Die mit der Übertragung von Informationen aus der komplexen realen Welt in ein generalisiertes kartographisches System verbundenen grundlegenden Probleme werden analysiert, und es werden technologische Aspekte der Disziplin beschrieben. Zeitgenössische Anwendungen der Kartographie schlieβen die Kartierung von Katastrophen, Verbindungen zu GPS, gefühlsmäβge Erzeugnisse und elektronische hydrographische Darstellungen ein, die alle den vom Nutzer beeinflufiten Fortschritt darstellen. Es wird geschluffolgert, daft die Zukunft der Kartographie vor allem von der graphischen Darstellung hoher Qualität, die dem Endnutzer geliefert wird, abhängig ist undnicht so sehr von den Methoden, me dieses Ziel erreicht wird.

Notes: Since its foundation in 1982, the Institut Cartogràfic de Catalunya has been dealing with digital images. Though digital images and techniques were initially confined to remote sensing, they have been gradually transferred to and combined with photogrammetry. In addition to the development of remote sensing and digital orthophotography systems, this expertise has facilitated the introduction of commercially available digital photogrammetric systems (scanning and stereocompilation) which are now in full operation. The paper describes the experience in scanning, orthophotography production and stereocompilation, draws some conclusions and gives an insight of the future of digital photogrammetry. 〈section xml:id="abs1-2"〉〈title type="main"〉Résumé L‘Institut Cartographique de Catalogue s‘est intéressé au traitement des images numériques depuis le moment où il a été crée, en 1982. Bien qu'au début les images numériques et leur technologie aient été réservées à la télédétection, elles se sont trouvées peu à peu transférées et intégrées à la photogrammétrie. Ce savoir-faire a permis le développement des systèmes de télédétection et ď orthophotographie numérique et a, de plus, facilité la mise à disposition sur le marché de systèmes de photogrammétrie numérique qui sont maintenant pleinement opérationnels. On présente dans cet article ľ expérience acquise dans le domaine du balayage, de la production des orthophotographies et de la stéréocompilation, on en tire quelques conclusions et ľ on termine par un aperçu sur ľ‘avenir de la photogrammétrie numérique. 〈section xml:id="abs1-3"〉〈title type="main"〉Zusammenfassung Seit seiner Gründung im Jahre 1982 hat sich das Institut Cartogràfic de Catalunya mit digitalen Bildern beschäftigt. Obwohl digitate Bilder und Verfahren ursprünglich auf die Fernerkundung begrenzt waren, wurden sie schrittweise auf die Photogrammetrie übertragen bzw. mit ihr kombiniert. Zusätzlich zur Entwicklung von Fernerkundung und digitaler Orthophoto-Systeme hat diese Erfahrung die Einführung kommerziell verfügbarer digitaler photogrammetrischer Systeme erleichtert, die jetzt überall in der Praxis angewendet werden. Der Beitrag beschreibt die Erfahrung bei der Abtastung, der Herstellung von Orthophotos und bei der Stereoauswertung und gibt einige Schluβfolgerungen und Aussichten in bezug auf die Digitalphotogrammetrie wieder.

Notes: The paper entitled The Photogrammetric Society Analogue Instrument Project was published in The Photogrammetric Record, 14(82): 565–582 (October 1993) and contained, as Appendix A, an extract from the Archive concerned with the history of the Zeiss Stereoplanigraph in Great Britain. In The Photogrammetric Record, 14(83): 769–782 (April 1994), three further Appendices were published which dealt with the Williamson Multiplex equipment and other instruments. In this third extract, the history of five other instruments of the Multiplex type are described. This brings to a close that section of the Archive dealing with instruments using direct optical projection.〈section xml:id="abs1-2"〉〈title type="main"〉Résumé On a publicé dans le numéro 14(82) (pp 565–582) ďoctobre 1993 du“Photogrammetric Record”ľarticle intitulé“le projet de la Société (britannique) de Photogrammétrie sur les instruments analogiques” et inséré dans ľannexe A un extrait des Archives relatif a ľhistorie du Stereoplan-igraphe Zeiss en Grande-Bretagne. On a publicé dans le numéro 14 (83) ďavril 1994 du“Photogrammetric Record”(pp 769–782) trois annexes supplémentaires qui traitaient de ľappareil Multiplex de Williamson et ďautres instruments. Dans ce troisième extrait, on présente ľhistorie de cinq autres appareils du type Multiplex. Cette partie des Archives qui traitait des appareils basés sur ľemploi ďuneprojection optique directe, se trouve ainsi achevee.〈section xml:id="abs1-3"〉〈title type="main"〉Zusammenfassung Der Beitrag mit dem Titel“The Photogrammetric Society Analogue Instrument Project”wurde im Photogrammetric Record, 14(82): 565–582 (Oktober 1993) veröffentlicht und enthielt als Anlage A einen Extrakt vom Archiv, das mit der Geschichte des Zeiss Steroplanigraph in Groβbritannien verbunden war. Im Photogrammetric Record, 14(83); 769–782 (April 1984) wurden 3 weitere Anlagen veröffentlicht, die vom Williamson Multiplex und anderen Geräten handelten. In diesem 3. Auszug wird die Geschichte von 5 anderen Geräten des Multiplex-Typs beschrieben. Das führt zum Abschluβ desjenigen Teils des Archivs, das sich mit Geräten mit direkter optischer Projektion befaβt.

Notes: An analysis is given of the modelling of XY stage errors in an analytical plotter by polynomial functions. This is discussed as an alternative to demanding strict mechanical accuracy in the stage construction. In an era of plentiful computational resources, it is concluded that apportioning more of the responsibility to the mathematical co-ordinate refinement is an effective strategy. A second degree polynomial is used for each of the two stages in an analytical plotter, modelling the systematic stage errors to within the variability of a single observation. A requirement for instrument stability is emphasized. Such techniques have application for other instruments such as image scanners. 〈section xml:id="abs1-2"〉〈title type="main"〉Résumé On étudie la modélisation des erreurs des chariots XY ďun restituteur analytique en utilisant des fonctions polynomials. II s‘agit en fait de trouver une alternative à des exigences de prêcision mêcanique très strictes dans la réalisation de ces chariots. A une époque oùľon dispose ďune abondance de ressources en moyens de calcul, il apparait en effet relever ďune stratégie efficace de s'appuyer davantage sur les traitements mathématiques pour améliorer les valeurs des coordonnées. On utilise, pour chacun des deux chariots, un polynome du second degrè pour modéliser les erreurs systématiques des chariots, et les rendre inférieures aux erreurs propres à une observation unique. On insiste sur la nécessitéďune grande stabilityé instrumental. Ces processus peuvent également s'appliquer àďautres instruments comme les scanneurs ďimages. 〈section xml:id="abs1-3"〉〈title type="main"〉Zusammenfassung Es wird die Modellierung von Fehlern des xy-Wagens bei analytischen Auswertegeräten mit Hilfe von Polynomen analysiert. Des wird als Alternative zur Forderung nach einer strengen mechanischen Genauigkeit bei der Bildwagenkonstruktion diskutiert. Im Zeitalter hervorragender Computer-Ressourcen, so wird geschluβfolgert, ist es eine effektive Strategie, sich mehr der mathematischen Koordinatenverbesserung zuzuwenden. Ein Polynom 2. Grades wird für jeden der 2 Bildträger eines analytischen Auswertegerätes genutzt, um die systematischen Fehler im Bereich der Variation von einzelnen Beobachtungen zu modellieren. Bezüglich der Stabilität des Instruments wird eine Anforderung formuliert. Solche Verfahren kännen auch bei anderen Geräten, wie zum Beispiel Bildscanner angewendet werden.

Notes: Earlier mathematical models that have been developed for use with data acquisition/data reduction systems in close range photogrammetry have not taken into consideration the geometry of video imagery. In this paper, a recently developed multi-application collinearity equation (MACE) model is analysed and assessed. The model is simple to apply and is adaptable to any data acquisition/data reduction system in close range photogrammetry.

Notes: The use of CCD cameras for digital photogrammetry has only slowly been taken up by the photogrammetric community. However, the pace of change is quickening with better understanding and cheaper equipment. Recently a decision was made to start some research into close range three dimensional digital measurement. The overall objective was to develop a low cost system for the automated measurement of small industrial objects. This shorter contribution describes the initial stages of this work.

Notes: This paper presents two mathematical models of the accuracy of digital terrain model (DTM) surfaces which have been linearly constructed from square gridded data, respectively with and without additional feature specific data. In these models, the accuracy of DTM surfaces is expressed as a function of a few parameters, such as slope angle, grid interval or the accuracy of raw data, which are familiar to practitioners in photogrammetry and other mapping related disciplines. These models are in a form similar to the conventional formulae for contour map accuracy and they are compared with experimental test results.

Notes: In 1987, the Scottish Office commissioned vertical aerial photography for the whole of Scotland at 1:24 000 scale. The paper describes the need for this national coverage, the physical and economic constraints and the acquisition of the photographs. The principal use of the photography, as a database for measuring land cover change in Scotland, is summarised and numerous other projects are also described. 〈section xml:id="abs1-2"〉〈title type="main"〉Résumé Le Bureau des Affaires Écossaises a commandé en 1987 une couverture photographique aérienne verticale au 1:24000 sur ľensemble de ľÉcosse. On présente dans cet article les besoins qui ont motivé cette couverture, les contraintes économiques el physiques correspondantes et le déroulement de sa saisie. On donne un aperçu de la principale utilisation de ces photographies, destiniées à constituter une base de données pour la détermination des modifications intervenues en Écosse dans ľoccupation du sol; de nombreux autres projets sont également mentionées. 〈section xml:id="abs1-3"〉〈title type="main"〉Zusammenfassung Im Jahre 1987 gab das Scottish Office Auftrag zur Luftbildaufnahme im Maβstab 1:24000 von ganz Schottland. Im Artikel werden die Notwendigkeit für diese vollständige nationale Bedeckung, für die physikalischen und ökonomischen Zwangsbedingungen und für die Beschaffung der Fotos beschrieben. Die prinzipielle Nutzung der Fotografie als Datenbasis zur Bestimmung der Landnutzungsänderung in Schottland wird hervorgehoben und zahlreiche andere Projekte werden ebenso beschrieben.

Notes: Maintaining the quality of aerial photographic products with time requires a simultaneous retention of both image and dimensional characteristics. These factors are prerequisites for maintaining aesthetic value and ensuring no distortion of information occurs. It is, however, the recent experience of archivists that many negatives and prints are suffering irreversible deterioration. Degradation is typified by image fading, the presence of surface crystalline deposits which obscure any image and significant dimensional distortion. This paper relates those factors which influence stability, principally temperature, relative humidity and oxygen, and correlates them to structural changes in the materials. In addition an overview is given of methods of monitoring and of inhibiting breakdown. 〈section xml:id="abs1-2"〉〈title type="main"〉Résumé Pour maintenir la qualité des produits photographiques aériens dans le temps, il faut satisfaire auxproblèmes de conservation à la fois de ľimage et de ses qualités dimensionnelles. Ce sont des préalables nécessaires au maintien de la qualité esthétique du document et àľabsence de distorsion dans ses données. C'est que ľexpérience récente des archivistes a montré que nombre de négatifs et de tirages subissaient actuellement des détériorations irréversibles. Ces détériorations sont caractérisees par ľaffaiblissement de ľimage, ľapparition de dépôts cristallins en surface qui obscurcissent ľimage et ľexistence de variations dimensionelles importantes. On examine dans cet article les facteurs qui pertubent cette conservation, essentiellement la température, ľhumidité relative et ľoxydation et on les corrèle avec les changements structured des matériaux. On donne de plus un aperçu des méthodes permettant de suivre et de freiner ces altérations. 〈section xml:id="abs1-3"〉〈title type="main"〉Zusammenfassung Das Gewährleisten der Qualität von Luftbilderzeugnissen in Abhängigkeit der Zeit erfordert die gleichzeitige Bewahrung sowohl der Bild- als auch der Dimensionscharakteristika. Diese Faktoren sind die Voraussetzungen zur Erhaltung des ästhetischen Wertes und gewährleisten, daβ keine Verzerrung der Informationen auftritt. Es ist jedoch neuste Erfahrung von Archivaren, daβ viele Negative und Kopien irreversible Wertminderungen erleiden. Das wird sichtbar durch das Verblassen von Bildern, das Auftreten von kristallinen Ablagerungen aufder Oberfläche, die Bilddetails verdecken und durch signifikante Dimensionsänderungen. Der Betrag bezieht sich auf solche Faktoren, die die Stabilitat beeinflussen, vor allem Temperatur, relative Luftfeuchte und Sauerstoff und korreliert diese mit strukturellen Veranderungen des Materials. Zusätzlich wird ein Überblick über Verfahren zur Materialbeobachtung und der Verminderung von dessen Verderb gegeben.

Notes: During both the First and Second World Wars, much effort was put into obtaining and interpreting aerial photographs for military reconnaissance purposes. Initially this material was classified; however, with the passing of time, much has now been declassified and is accessible to the general public. There is a large variety of information which can be of use to a number of disciplines. This material includes photographic prints, interpretation manuals, interpretation reports, plans of targets, and technical details of cameras, lenses and mountings. The use of this material will be demonstrated with examples from the United Kingdom, France and Italy, primarily for civil engineering site studies. The varied sources of this material will be discussed. 〈section xml:id="abs1-2"〉〈title type="main"〉Résumé Au cours de la première et de la seconde Guerre Mondiale, on a déployé beaucoup ď efforts dans le receuil et ľ interprétation de photographies aériennes à des fins de reconnaissance militaire. Au début on classifia ces documents; mais maintenant, le temps ètant écoulé, on en a déclassifié une grande partie pour la rendre accessible au grand public. On peut ainsi y trouver toutes sortes ď informations qui peuvent être utiles à de nombreuses disciplines. Ces documents comprennent des tirages photographiques, des manuels ď interprétation, des rapports ď interprétation, des plans ď objectifs (militaires), et des détails techniques sur les chambres photographiques, leurs objectifs et leurs montures. Ľ intérêt du recours à ces documents est illustré par des examples provenant du Royaume-Uni, de France et ďItalie, essentiellement dans le domaine du génie civil pour des études de sites. On examine également les diverses origines de ces documents. 〈section xml:id="abs1-3"〉〈title type="main"〉Zusammenfassung Während des 1. und 2. Weltkrieges wurde vielAufwand zur Gewinnung und Interpretation von Luftbildern für militärische Erkundungszwecke geleistet. Anfänglich wurde dieses Material unter Verschluβ gehalten, im Laufe der Zeitjedoch wurde vielesfreigegeben und ist nun der Öffentlichkeit zugänglich. Es gibt eine Vielzahl von Informationen, die für eine Anzahl von Disziplinen von Nutzen sein kann. Das Material umfaβt Fotokopien, Interpretationsmanuale, Interpretationsberichte, Pläne von Zielen und technische Details über Kameras, Objektive und Aufhängungen. Die Nutzung dieses Materials wirdan Hand von Beispielen aus dem Vereinigten Königreich, aus Frankreich und aus Italien gezeigt, und zwar vor allem für Analysen von Baustellen. Die vielfältigen Quellen für dieses Material werden diskutiert.

Notes: Low cost analytical plotters for use with 35 mm and 70 mm metric and non-metric photography are increasingly being considered as a means of introducing photogrammetry to non-photogrammetrists. One of these instruments, an Adam Technology MPS-2, recently formed the basis for a research project into the feasibility of such non-specialist use. During the project, an MPS-2 users' group was formed and many of the current users were asked to complete a questionnaire detailing their experiences with the instrument. Almost 40 users responded and their replies are given in this paper, which begins by outlining the project and goes on to discuss the comments received. The paper ends with an appraisal of the MPS-2 as seen through the eyes of its users and concludes that, considering its relatively low cost, it is definitely worthy of consideration by non-specialists. 〈section xml:id="abs1-2"〉〈title type="main"〉Résumé On considère actuellement de plus en plus que les appareils de réstitution analytiques bon marché, permettant ľemploi des photographies 35 mm et 70 mm, métriques et non-métriques, constituent un bon moyen ďinitiation des non-photogrammètres à la photogrammétrie. Ľun de ces instruments, le MPS-2 de la Société Adam Technology, a servi de base à une action de recherche sur lafaisabilitéďun tel emploi par des non-spécialistes. On a formé, dans le cadre de cette action de recherche, un groupe ďutilisateurs du MPS-2, à la plupart desquels on a adressé un questionnaire leur demandant de détailler leur expérience de cet appareil. On a reçu près de 40 réponses ďutilisateurs et ľon reproduit ces réponses dans cet article. Après avoir esquisé les grandes lignes de cette action de recherche, on commente les réponses reçues. On termine sur une appréciation du MPS-2 vu par les utilisateurs et on en conclut que, étant donné son coût relativement faible, cet appareil mérite absolument ďêtre pris en compte par les non-spécialistes. 〈section xml:id="abs1-3"〉〈title type="main"〉Zusammenfassung Preiswerte analytische Auswertegeräte für die Auswertung von 35 mm-und 70 mm-Fotos, die mit Meβkammern und Nichtmeβkammern aufge-nommen wurden, werden zunehmend als Mittel zur Einführung der Phologrammetrie bei Nichtphotogrammetem angesehen. Eines dieser Geräte, ein MPS-2 von Adam Technology, bildete kürzlich die Grundlage für ein Forschungsprojekt zum Nutzen solcher Anwendungen für Nicht-spezialisten. Während des Projektes wurde eine MPS-2-Nutzergruppe gebildet und viele der gegenwärtigen Nutzer wurden gebeten, einen Fragebogen zu vervollständigen und ihre Erfahrungen mit dem Gerät mitzuteilen. Zunächst wird das Projekt skizziert, und dann werden die erhaltenen Kommentare diskutiert. Der Artikel schlieβt mit einer Bewertung des MPS-2, wie er mit den Augen seiner Nutzer gesehen wird und schluβfolgert, daβ er unter Beachtung seiner relativ geringen Kosten deutlich die Aufmerksamkeit der Nichtspezialisten verdient.

Notes: The evolution of quality assurance at the Ordnance Survey of Great Britain (OS) is described. Quality control methods have been adopted to cope with the change from graphical to digital products and processes, but the human inspector remains indispensable. Following an agreement that the OS will archive large volumes of digital data captured by public utility contractors, quality assurance procedures for the acceptance of batches of digital maps have been based on an elaboration of standards BS 6001 (IS02859). A quality assurance certification scheme for land survey organisations based on BS 5750 (ISO9001) is under discussion. However, following recent government initiatives in quality management, the OS is now committed to the philosophy of total quality management and registration schemes for quality assurance could eventually become obsolete. 〈section xml:id="abs1-2"〉〈title type="main"〉Résumé Cet article traite de ľévolution de ľassurance-qualitéàľOrdnance Survey (OS) de Grande-Bretagné. On a adopté a ľOS des méthodes de contrôle-qualité permettant de faire face aux changements résultant du passage de la forme graphique à la forme numérique pour les procédés el les produits, tout en conservant unepart ďintervention humaine indispensable dans les controles. Comme suite à une convention passée avec les services publics selon laquelle ľOS doit archiver ďimportantes quantités des donnees numiriques que ceux-ci auront receuillies, on se conformera à un système de normes BS 6001 (ISO 2859) pour les procédés ďassurance-qualité lors de la recette technique des lots de cartes numériques. La discussion porte actuellement sur un projet de certification ďassurance-qualité et de registre pour les organismes de levé foncier, en se basant sur la norme BS 5750 (ISO 9001). Toutefois, aprés les récentes initiatives gouvernementales en matière de gestion de la qualityé, ľOS se trouve maintenant confrontéà la philosophie ďune gestion de la qualityé-totale, ce qui pourrait finalement rendre périmés les projets ďassurance-qualité actuels. 〈section xml:id="abs1-3"〉〈title type="main"〉Zusammenfassung Es wird die Entwicklung der Qualitätssicherung beim Ordnance Survey (OS) in Groβbritannien beschrieben. Dazu wurden Verfahren zur Qualitätskontrolle entwickelt, die dem Wechsel von graphischen zu digitalen Erzeugnissen und Prozessen genügen, aber der menschliche Faktor bleibt dabei unentbehrlich. Entsprechend einer Vereinbarung, wonach der OS groβe Mengen digitaler Daten archiviert, die durch öffentlich bestellte Vertragspartner erfaβt wurden, beruhen die Verfahren zur Qualitätssicherung für die Annahme von Datensätzen digitaler Karten auf der Ausarbeitung der Standards BS 6001 (ISO 2859). Diskutiert wird gegenwärtig ein auf dem Standard BS 5750 (ISO 9001) basierendes Nachweisschema zur Qualitätssicherung und ein Register für Organisationen, die sich mit Landvermessungen beschüftigen. Folgt man jedoch jüngsten Initiativen der Regierung in bezug auf die Behandlung der Qualität, so ist der OS der Philosophie zur totalen Qualitätsverwaltung und Registratur verpflichtet, denn die Qualitätsgewährleistung könnte möglicherweise unüblich werden.

Notes: Photogrammetric measurements within environmental test chambers which incorporate viewing ports constitute an application of multi-media photogrammetry. Perturbations to the incident bundles of rays due to refraction must therefore be taken into account. In this paper, refraction compensation for the case of antenna measurements within thermal vacuum chambers is discussed. Correction models applicable to the camera invariant refracting surfaces of a glass window and vacuum chamber are reviewed, especially error compensation using the approach of analytical selfcalibration. Results of a sequence of measurements of a satellite antenna are then analysed to illustrate the high measurement accuracies which are afforded by the selfcalibration approach. 〈section xml:id="abs1-2"〉〈title type="main"〉Résumé Les déterminations photogrammétriques dans un environnement de caissons ď essais munis de hublots de visée, constituent une application de la photogrammetrie à trovers des milieux multiples. II y a lieu par conséquent de tenir compte des perturbations que subissent lesfaisceaux de rayons lumineux incidents par suite de la réfraction. On examine dans cet article la compensation de la réfraction dans le cas de mesures sur des antennes placées dans des enceintes thermiques sous vide. On analyse les modèles de correction applicables aux surfaces réfractantes invariantes de la chambre photographique et de ľ enceinte à vide, comprenant des fenêtres en verre, en s'attachant plus particulièrement à une compensation ď erreurs basée sur des méthodes ď auto-étalonnage analytique. On présente ensuite les résultats ď une série de mesures portant sur une antenne de satellite, qui illustrent le haut degré de précision atteint par cette méthode ďauto-étalonnage. 〈section xml:id="abs1-3"〉〈title type="main"〉Zusammenfassung Photogrammetrische Messungen innerhalb von Umwelt-Testkammern, die auch Öffnungen zum Durchblick enthalten, stellen eine Anwendung der Multimedien-Photogrammetrie dar. Demzufolge müssen Störungen wegen Refraktion bei den Aufnahmestrahlenbündeln berücksichtigt werden. Im vorliegenden Beitrag wird die Kompensation der Refraktion für Antennenmessungen in thermalen Vakuum-Kammern diskutiert. Korrekturmodelle, die auf die kamerainvarianten brechenden Oberflächen eines Fensterglases und die Vakuum-Kammer angewandt werden können, werden analysiert, besonders unter dem Gesichtspunkt, daß eine Fehlerkorrektur mittels Selbstkalibrierung erfolgt. Dann werden Ergebnisse einer Folge von Messungen an der Satellitenantenne analysiert, um die hohe Meßgenauigkeit darzustellen, die aus dem Ansatz zur Selbstkalibrierung resultiert.

Notes: This paper describes some experimental investigations into the variation of digital terrain model (DTM) accuracy with sampling interval, based on data acquired using stereophotogrammetric methods. The main factors affecting DTM accuracy are reviewed and various alternative schemes for carrying out experimental tests on DTM accuracy are outlined. Detailed information is given about the test areas, source data sets and check point data sets, followed by a discussion concerning the special design of this experiment. The experimental results are reported and, finally, a critical analysis of the test results is presented.〈section xml:id="abs1-2"〉〈title type="main"〉Résumé On presente dans eel article quelques études expérimentales sur la variation de ľ exactitude ďun modèle numerique du terrain (MNT) en fonction de ľintervalle ďéchantillonnage de données obtenues à partir de méthodes stéréophotogrammétriques. On examine les facteurs principaux qui interviennent sur ľ exactitude ď un MNT et ľ on esquisse divers projets permettant de mener au choix des essais expérimentaux sur ľ exactitude ďun MNT. On fournit des informations détaillées sur les polygones ď essai utilisés, lesjeux de données concernant les points de vérification et ceux de l'altimétrie initiale, suivies ďune présentation de la conception particulière de ces études. On décrit les résultats expérimentaux obtenus et ľ on termine cet article par une analyse critique des résultats de ľ essai. 〈section xml:id="abs1-3"〉〈title type="main"〉Zusammenfassung Im Artikel werden einige experimentelle Untersuchungen zur Variation der Genauigkeit von Digitalen Geländemodellen (DTM) beschrieben, wobei ein Rasterintervall verwendet wurde, das auf stereophotogrammetrischer Datenerfassung basierte. Es werden die Haupteinfluβfaktoren auf die Genauigkeit der DTM betrachtet und verschiedene alternative Wege zur Testung der DTM-Genauigkeit skizziert. Detaillierte Angaben erfolgen zu den Testgebieten, den Quelldaten-Sätzen und den Datensätzen der Kontrollpunkte mit anschlieβenden Ausführungen zur speziellen Gestaltung dieses Versuchs. Die Versuchsergebnisse werden angegeben, und abschlieβend erfolgt ihre kritische Analyse.

Notes: The broad requirements of the geomorphologist for original mapping are reviewed. The extent to which aerial photogrammetry can meet these requirements is exemplified through typical approaches and mapping products in fluvial, coastal and glacial specialisms.

Notes: As part of the measurements of desert terrain characteristics in the United Arab Emirates, made in support of a study of airborne radar, close range vertical stereophotographs of various natural surfaces were taken with a pair of Hasselblad MK70 metric cameras. The technique is described and the constraints imposed by the ground conditions and the need for rapid measurements are explained. Various terrain types are illustrated and the method is described whereby variables summarising surface roughness and surface slope were generated from profiles of the microrelief. From a more general discussion of current equipment and geomorphological applications of close range photogrammetry, it is concluded that this flexible technique is presently under utilised by field scientists.

Notes: The French topographic database is a three dimensional database whose content is very near to that of the IGN 1:25 000 scale maps. It has a metric accuracy and is designed to have three aims (maps at scales of 1:25 000 and 1:50 000 and the topographic part of the cadastral map at 1:5000 scale, providing located structured data). The structure, including topology information, is described. The process of data capture is based on photogrammetry and field completion. Experiments concerned with revision are being made in order to define the methodology precisely.

Notes: A mathematical model for pass processing of SPOT imagery is formulated. It is based on the fact that during one pass, the image data stream from each of the instruments in SPOT forms one single very long image. The geometry of this extended image can thus be rectified with as few control points as for only one scene if orbital constraints and attitude measurements are properly taken into consideration. SPOT imagery is, however, not available as this single long image, but only sectioned into scenes. This creates problems which are accounted for in the solution. The possibility of gaps in the sequence of scenes is also taken into consideration. Extrapolation over gaps is of special interest and, by investigating attitude variability, it is shown that extrapolation is successful over multiple scene gaps which is also verified in a real data test.

Notes: Inner constraints, generalised matrix inverses and S-transformations are described in relation to least squares estimation of spatial positions. A simple example is used to illustrate some of the theory. The various roles and properties of covariance functions and matrices are presented with a discussion of their practical determination and use in least squares interpolation and collocation.

Notes: This review of digital image processing refers to the pioneer work of Helava and Hobrough which has influenced the most recent trends in photogrammetry. The author goes on to discuss aspects of digital image acquisition, storage and display, as well as digital photogrammetric procedures and systems.

Notes: Site procedures, instrumentation, analytical methods and accuracies achieved are described for the measurement of the deformation of a military steel bridge under load in a test gantry. Some remarks concerning the advantages and disadvantages of photogrammetry as a method of industrial measurement are made.

Notes: An account is given of the importance of photogrammetric techniques in industrial three dimensional problems and the way in which obtaining data in this environment differs from the more common applications. Possible system arrangements are discussed. The particular choice at Imperial College and the resulting system speed and accuracy are presented.

Notes: Lasertrace is a high accuracy measurement system for the remote, non-contact determination of position, velocity, or acceleration in two or three dimensions. It uses advanced two axis laser steering technology to locate and measure the angular position, from itself, of an identified point on an object under investigation. If the object subsequently moves, the steerable laser beam actually tracks the point providing updated position coordinates as it does so. An operating window of 40° in both axes guarantees system versatility in a wide range of applications.

Notes: Optical triangulation is used in the human visual system and surveying tacheometers to estimate distance. This method is now used in systems with solid state sensors which enable fast measurement of distance with sufficiently high accuracy for many applications. City University has built on past experience to develop the optical triangulation technique to gather data appertaining to cross sections or profiles of structures in the range 0.2 m to 20 m radius from the measurement axis. Results obtained using three prototypes are given.

Notes: The author, a research and development manager at Ordnance Survey, reviews current developments in photogrammetry including the automatic correlation of image points for aerial triangulation, digital photogrammetric map revision, mapping from SPOT imagery and progress in aerial photography.

Notes: This study of coastal air survey draws together the main characteristics of the coastal zone, scientific sites of interest, statutory spheres of responsibility, existing coastal photography and survey, and evidence of survey practices by many with responsibilities in these environments. In contrast to the surveyor/photogrammetrist steeped in survey techniques and map use, the majority of people who commission and use air photographs and photogrammetric mapping have very different backgrounds and interests and have widely differing objectives. They come largely from the disciplines of economics, planning, engineering, geography, biological sciences and accountancy. They, too, have their own view of the value of air survey and the analysis here of the trends in demand and use for such material suggests that these sources of information play only a minor and occasional part in their everyday work.

Notes: This paper presents all the stages involved in the procedure for the determination of the shape of a fuel assembly, which is an essential part of a nuclear power plant and can only be handled underwater. Phototriangulation is used to obtain orientation elements, taking into account light refracting surfaces. Stereomodels are then set up for analytical restitution and the shape parameters for the object can be obtained. The project is a typical example of high precision underwater photogrammetry.