ALBERT

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. '1pctCo2' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.1 1pctCo2 (6.1 1 percent per year CO2) - Version 1: Idealized 1% per year increase in atmospheric CO2 to quadrupling. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. historicalMisc is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc . Used forcings in individual ensemble runs (see attached addinfo for more information): r[1-5]i1p1 - Ant: anthropogenic forcing (AA anthropogenic aerosols - a mixture of aerosols, not explicitly defined here; Oz - tropospheric and stratospheric ozone; GHG - well-mixed greenhouse gases, a mixture, not explicitly defined here); r[1-5]i1p2 - NoOz: all forcings except tropospheric and stratospheric ozone concentrations fixed; r[1-5]i1p3 - NoAA: all forcings except anthropogenic aerosols (AA) and the indirect effect of AA on snow albedo; r[1-5]i1p4 - AA: anthropogenic aerosols (AA) including the indirect effect of AA on snow albedo; r[1-5]i1p5 - AntNoAA: the same as NoAA (AA is fixed at preindustrial levels), except that AA emissions are allowed to vary in the Asian region [10S to 45N x 65E to 150E]; r[1-5]i1p6 - VI: volcanic forcing only.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'sstClim' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.2a sstClim (6.2a Control SST Climatology) - Version 1: AMIP-style experiment with control run climatological SSTs and sea ice. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'sstClimAerosol' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.4a sstClimAerosol (6.4a all aerosol forcing) - Version 1: AMIP-style experiment with control run climatological SSTs and sea ice (as in expt. 6.2a) but with aerosols consistent with conditions in year 2000 of the historical run (expt. 3.2) Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'abrupt4xco2' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.3 abrupt4xco2 (6.3 Abrupt 4XCO2) - Version 1: Impose an instantaneous quadrupling of CO2, then hold fixed. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'sstClim' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.2a sstClim (6.2a Control SST Climatology) - Version 1: AMIP-style experiment with control run climatological SSTs and sea ice. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. '1pctCo2' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.1 1pctCo2 (6.1 1 percent per year CO2) - Version 1: Idealized 1% per year increase in atmospheric CO2 to quadrupling. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. midHolocene is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. midHolocene (3.4 mid-Holocene) - Version 2: Consistent with PMIP (Paleo Model Intercomparison Project) specifications. Impose Mid-Holocene (6 kyrs ago) conditions including Orbital parameters and Atmospheric concentrations of well-mixed greenhouse gasses. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'amip' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 3.3 amip (3.3 AMIP) - Version 1: AMIP (1979 - at least 2008). Impose SSTs and sea ice from observations but with other conditions as in experiment 3.2 historical. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'historicalNat' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 7.1 historicalNat (7.1 natural-only historical simulation) - Version 1: Historical simulation but with natural forcing only. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'abrupt4xco2' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.3 abrupt4xco2 (6.3 Abrupt 4XCO2) - Version 1: Impose an instantaneous quadrupling of CO2, then hold fixed. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'rcp45' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 4.1 rcp45 (4.1 RCP4.5) - Version 1: Future projection (2006-2100) forced by RCP4.5. RCP4.5 is a representative concentration pathway which approximately results in a radiative forcing of 4.5 W m-2 at year 2100, relative to pre-industrial conditions. RCPs are time-dependent, consistent projections of emissions and concentrations of radiatively active gases and particles. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. historicalExt is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 7.4 historicalExt (7.4 Historical Extension) - Version 1: Extend the CMIP5 historical runs to the near-present (as we have for AMIP), rather than ending them in 2005. Simulations extended to at least the end of 2012 using some estimate of recent and future forcing. Groups are free to use whatever concentrations, solar forcing, SO2 emissions etc. they want to use in extending these runs. It is recommended that if an ensemble of "all-forcings" historical simulations have been run, then *each* member of the ensemble should be carried to the end of 2012. If some other forcing is used or if the run is an RCP run that is truncated after a few years, then the run should be considered a "historical extension" experiment with its output placed in a directory named historicalExt. For these historicalExt experiments, the ensemble member (designated by the "rip" value appearing in the filename and recorded as netCDF global attributes) will be identical to the historical run it extends. List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'amip' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 3.3 amip (3.3 AMIP) - Version 1: AMIP (1979 - at least 2008). Impose SSTs and sea ice from observations but with other conditions as in experiment 3.2 historical. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. piControl is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 3.1 piControl (3.1 Pre-Industrial Control) - Version 1: Pre-Industrial coupled atmosphere/ocean control run. Imposes non-evolving pre-industrial conditions. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. historicalExt is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 7.4 historicalExt (7.4 Historical Extension) - Version 1: Extend the CMIP5 historical runs to the near-present (as we have for AMIP), rather than ending them in 2005. Simulations extended to at least the end of 2012 using some estimate of recent and future forcing. Groups are free to use whatever concentrations, solar forcing, SO2 emissions etc. they want to use in extending these runs. It is recommended that if an ensemble of "all-forcings" historical simulations have been run, then *each* member of the ensemble should be carried to the end of 2012. If some other forcing is used or if the run is an RCP run that is truncated after a few years, then the run should be considered a "historical extension" experiment with its output placed in a directory named historicalExt. For these historicalExt experiments, the ensemble member (designated by the "rip" value appearing in the filename and recorded as netCDF global attributes) will be identical to the historical run it extends. List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'historical' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 3.2 historical (3.2 Historical) - Version 1: Simulation of recent past (1850 to 2005). Impose changing conditions (consistent with observations). Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'historical' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 3.2 historical (3.2 Historical) - Version 1: Simulation of recent past (1850 to 2005). Impose changing conditions (consistent with observations). Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'sstClim4xco2' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.2b sstClim4xco2 (6.2b SST Climatology With 4XCO2 Forcing) - Version 1: AMIP-style experiment with control run climatological SSTs and sea ice (as in 6.2a) but with quadrupled 4XCO2 imposed. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. piControl is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 3.1 piControl (3.1 Pre-Industrial Control) - Version 1: Pre-Industrial coupled atmosphere/ocean control run. Imposes non-evolving pre-industrial conditions. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. '1pctCo2' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.1 1pctCo2 (6.1 1 percent per year CO2) - Version 1: Idealized 1% per year increase in atmospheric CO2 to quadrupling. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'sstClim4xco2' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.2b sstClim4xco2 (6.2b SST Climatology With 4XCO2 Forcing) - Version 1: AMIP-style experiment with control run climatological SSTs and sea ice (as in 6.2a) but with quadrupled 4XCO2 imposed. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. "historicalGHG" is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 7.2 historicalGHG (7.2 GHG-only historical) - Version 1: Historical simulation but with greenhouse gas forcing only. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. piControl is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 3.1 piControl (3.1 Pre-Industrial Control) - Version 1: Pre-Industrial coupled atmosphere/ocean control run. Imposes non-evolving pre-industrial conditions. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'rcp45' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 4.1 rcp45 (4.1 RCP4.5) - Version 1: Future projection (2006-2100) forced by RCP4.5. RCP4.5 is a representative concentration pathway which approximately results in a radiative forcing of 4.5 W m-2 at year 2100, relative to pre-industrial conditions. RCPs are time-dependent, consistent projections of emissions and concentrations of radiatively active gases and particles. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. rcp85 is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 4.2 rcp85 (4.2 RCP8.5) - Version 1: Future projection (2006-2100) forced by RCP8.5. RCP8.5 is a representative concentration pathway which approximately results in a radiative forcing of 8.5 W m-2 at year 2100, relative to pre-industrial conditions. RCPs are time-dependent, consistent projections of emissions and concentrations of radiatively active gases and particles. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. rcp85 is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 4.2 rcp85 (4.2 RCP8.5) - Version 1: Future projection (2006-2100) forced by RCP8.5. RCP8.5 is a representative concentration pathway which approximately results in a radiative forcing of 8.5 W m-2 at year 2100, relative to pre-industrial conditions. RCPs are time-dependent, consistent projections of emissions and concentrations of radiatively active gases and particles. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'rcp45' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 4.1 rcp45 (4.1 RCP4.5) - Version 1: Future projection (2006-2100) forced by RCP4.5. RCP4.5 is a representative concentration pathway which approximately results in a radiative forcing of 4.5 W m-2 at year 2100, relative to pre-industrial conditions. RCPs are time-dependent, consistent projections of emissions and concentrations of radiatively active gases and particles. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'historical' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 3.2 historical (3.2 Historical) - Version 1: Simulation of recent past (1850 to 2005). Impose changing conditions (consistent with observations). Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'historicalNat' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 7.1 historicalNat (7.1 natural-only historical simulation) - Version 1: Historical simulation but with natural forcing only. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'sstClimSulfate' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.4b sstClimSulfate (6.4b sulfate aerosol forcing) - Version 1: AMIP-style experiment with control run climatological SSTs and sea ice (as in expt. 6.2a) but with aerosols consistent with conditions in year 2000 of the historical run (expt. 3.2) Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'abrupt4xco2' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.3 abrupt4xco2 (6.3 Abrupt 4XCO2) - Version 1: Impose an instantaneous quadrupling of CO2, then hold fixed. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. rcp85 is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 4.2 rcp85 (4.2 RCP8.5) - Version 1: Future projection (2006-2100) forced by RCP8.5. RCP8.5 is a representative concentration pathway which approximately results in a radiative forcing of 8.5 W m-2 at year 2100, relative to pre-industrial conditions. RCPs are time-dependent, consistent projections of emissions and concentrations of radiatively active gases and particles. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'sstClimAerosol' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.4a sstClimAerosol (6.4a all aerosol forcing) - Version 1: AMIP-style experiment with control run climatological SSTs and sea ice (as in expt. 6.2a) but with aerosols consistent with conditions in year 2000 of the historical run (expt. 3.2) Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'sstClimSulfate' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.4b sstClimSulfate (6.4b sulfate aerosol forcing) - Version 1: AMIP-style experiment with control run climatological SSTs and sea ice (as in expt. 6.2a) but with aerosols consistent with conditions in year 2000 of the historical run (expt. 3.2) Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'amip' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 3.3 amip (3.3 AMIP) - Version 1: AMIP (1979 - at least 2008). Impose SSTs and sea ice from observations but with other conditions as in experiment 3.2 historical. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. "historicalGHG" is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 7.2 historicalGHG (7.2 GHG-only historical) - Version 1: Historical simulation but with greenhouse gas forcing only. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. rcp26 is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 4.3 rcp26 (4.3 RCP2.6) - Version 1: Future projection (2006-2100) forced by RCP2.6. RCP2.6 is a representative concentration pathway which approximately results in a radiative forcing of 2.6 W m-2 at year 2100, relative to pre-industrial conditions. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'rcp60' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 4.4 rcp60 (4.4 RCP6) - Version 1: Future projection (2006-2100) forced by RCP6. RCP6 is a representative concentration pathway which approximately results in a radiative forcing of 6 W m-2 at year 2100, relative to pre-industrial conditions. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: CHELSA_v1.0 (http://chelsa-climate.org/) is a high resolution (30 arc sec, ~1 km) climate data set for the earth land surface areas. Version 1.0 is a first release. It includes monthly and annual mean temperature and precipitation patterns for the time period 1979-2013. CHELSA_v1 is based on a quasi-mechanistical statistical downscaling of the ERA interim global circulation model (http://www.ecmwf.int/en/research/climate-reanalysis/era-interim) with a GPCC (https://www.dwd.de/EN/ourservices/gpcc/gpcc.html) and GHCN (https://www.ncdc.noaa.gov/ghcnm/) bias correction. Specifications: High resolution (30 arcsec, ~1 km) Precipitation & Temperature Monthly coverage 1979 - 2013 Incorporation of topoclimate (e.g. orographic rainfall & wind fields). Downscaled ERA-interim model. Allows calculation of derived parameters based on monthly values such as length of dry periods etc.

Description: CHELSA_v1.1 (http://chelsa-climate.org/) is a high resolution (30 arc sec, ~1 km) climate data set for the earth land surface areas. It includes monthly and annual mean temperature and precipitation patterns as well as derived bioclimatic and interannual parameters for the time period 1979-2013. CHELSA_v1.1 is based on a quasi-mechanistical statistical downscaling of the ERA interim global circulation model (http://www.ecmwf.int/en/research/climate-reanalysis/era-interim) with a GPCC (https://www.dwd.de/EN/ourservices/gpcc/gpcc.html) and GHCN (https://www.ncdc.noaa.gov/ghcnm/) bias correction.

Description: This is a hydrodynamic hindcast for the Baltic Sea over the period 1958-2011. The simulation has been performed with the hydrodynamic model TRIM-NP V2.1 in barotropic 2D mode. Water level and current component fields are stored hourly. The model is set up on an equidistant Cartesian grid cascade with the center near Helgoland (7.88 E, 54.18 N) for the coarsest grid (12.8km resolution) (http://dx.doi.org/doi:10.1594/WDCC/coastDat-2_TRIM-NP-2d). Further model results from three nested grids (6.4km,3.2km, 1.6km resolution) for the Baltic Sea are hourly available for the period 1958-2011.

Description: Hindcast simulation has been performed for reconstruction of meso-scale weather systems, especially of intense storms by using the global atmospheric model ECHAM6 in its version 6.1.00 (CMIP5), the spectral nudging technique and NCEP reanalysis as forcing data. Horizonatal resolution: (768x384) gridpoints (T255L95), vertical resolution: 95 levels. Time period: 1948 - 2015 april. The output from the model run: /work/gg0301/g260070/ECHAM6/echam-6.1.00/experiments/echam6_t255l95_sn_ncep1/scripts on the HLRE-2 Blizzard and the Original-Outputs of the 8 ECHAM6-streams were named and differed by their suffixes: echam6_t255l95_sn_ncep1_199212.01_co2 echam6_t255l95_sn_ncep1_199212.01_echam echam6_t255l95_sn_ncep1_199212.01_jsbach echam6_t255l95_sn_ncep1_199212.01_land echam6_t255l95_sn_ncep1_199212.01_nudg echam6_t255l95_sn_ncep1_199212.01_surf echam6_t255l95_sn_ncep1_199212.01_veg echam6_t255l95_sn_ncep1_199212.01_vphysc

Description: This is a North Sea wave hindcast for the period 1949-2014. The simulation has been performed with the wave model WAM Version 4.5.4. The model domain covers the area from 51N to 59N and 4.75W to 13E, with a spatial resolution of 0.05 degree latitude x 0.075 degree longitude (approx. 3 by 3 nautical miles). Integrated parameter derived from 2D spectra are available every hour. Atmospheric forcing was obtained from an atmospheric hindcast with COSMO-CLM (doi:10.1594/WDCC/coastDat-2_COSMO-CLM) driven by the NCEP/NCAR Reanalysis 1 data set. Lateral boundary conditions were obtained from corresponding coarse grid hindcast covering most of the Northeast Atlantic driven by the same atmospheric forcing.

Description: Reflectances measured in the visible frequency range at three channels of the Moderate Resolution Imaging Spectroradiometer (MODIS) aboard the Earth Observation Satellite (EOS) TERRA were used to derive the melt pond fraction on Arctic sea ice using an artificial neural network. This analysis was done on reflectances gridded onto a polar-stereographic grid tangent to the Earths' surface at 70 deg N with 500 m grid resolution. The reflectances used originate from the 8-day composite reflectances provided via https://wist.echo.nasa.gov/api/ as product: "MODIS surface Reflectance 8-Day L3 Global 500m SIN Grid V005". After gridding and flagging for clouds and other disturbances the artificial neural network was applied, providing fractions of three surface classes: 1) melt ponds, 2) sea ice and snow, and 3) open water at 500 m grid resolution. This data has been interpolated onto a similar polar-stereographic grid but with 12.5 km grid resolution. The data set offered here comprises several data layers: the melt pond fraction, its standard deviation, the open water fraction, and the number of individual valid grid cells with 500 m grid resolution included in each 12.5 km grid cell. In addition, in three separate data layers melt pond fraction, its standard deviation, and the open water fraction are given with those grid cells (with 12.5 km grid resolution) flagged as invalid where less than 90 % of the native 500 m grid resolution data indicate clear sky conditions. Valid for all these layers is, that grid cells with an open water fraction larger than 85 % have been flagged as invalid as well. The data set offered here is version 02 of the melt pond data set. The main difference to version 01 is a bias correction carried out to remove a positive bias in the melt pond fraction and in the open water fraction.

Description: Simulated 2D residual velocity fields in the inner German Bight were subjected to Principal Component Analysis (PCA). Residual currents were obtained from coastDat2 barotropic 2D simulations with the hydrodynamic model TRIM-NP V2.1.22 in barotropic 2D mode on a Cartesian grid (1.6km spatial resolution) stored on an hourly basis for the years 1948 - 2012 (doi:10.1594/WDCC/coastDat-2_TRIM-NP-2d) and later extended until August 2015. The present analysis refers to the period Jan 1958 - Aug 2015. The spatial domain considered is the region to the east of 6 degrees east and to the south of 55.6 degrees north. All grid nodes with a bathymetry of less than 10m were excluded. Residual velocities were calculated in two different ways: 1.) as 25h means, 2.) as monthly means. Both types of residual current data are available from * RESIDUAL_CURRENTS_195801_201508 The directory contains sub-directories for years and months. Daily residual currents for the 13th of September 1974, for instance, are stored in * RESIDUAL_CURRENTS_195801_201508/YEAR_1974/MONTH_09/TRIM2D_1974_09_13_means.nc while monthly mean residual currents for September 1974 are stored in: * RESIDUAL_CURRENTS_195801_201508/YEAR_1974/TRIM2D_1974_09_means.nc All current fields provided were interpolated from the original Cartesian model grid to a more convenient regular geographical grid (116x76 nodes). Mean residual currents are stored in: * mean_residual_currents.nc This data set contains residual velocities both on original Cartesian grid nodes and interpolated to the geographical grid. An example plot is provided: * mean_residual_currents.png For PCA, two residual velocity components from each of 12133 Cartesian grid nodes were combined into one data vector (length 2x12133), referring to 21061 daily or 692 monthly time levels. Results of two independent PCAs for either daily or monthly mean fields are stored in: * PCA_daily_residual_currents.nc * PCA_monthly_residual_currents.nc Files contain three leading Principal Components (PCs) and corresponding Emipirical Orthogonal Functions (EOFs). Again EOFs were also interpolated to a regular geographical grid. PC time series are also stored in plain ASCII format: * PCs_daily.txt * PCs_monthly.txt For monthly fields the number N of variables (N=2x12133) is much larger than the number T of time levels (T=692). Therefore, to reduce computational demands, the roles of time and space were formally interchanged. Having conducted the PCA the EOFs were then transformed back to the original spatial coordinates (cf. Section 12.2.6 in von Storch and Zwiers (1999), Statistical Analysis in Climate Research, Cambridge University Press). A much larger number of time levels made even this approach prohibitive for the full set of daily data. Therefore, PCAs were performed for six sub-periods (1958-1965, 1966-1975, 1976-1985, 1986-1995, 1996-2005, 2006-2015(Aug)) independently. EOFs obtained from these six sub-periods were then averaged to obtain EOFs representative for the whole period. Corresponding PCs were calculated by projecting daily fields onto these average EOFs. IMPORTANT: In contrast with PCA of monthly data, the PCA of daily data INVOLVES SOME APPROXIMATIONS! EOFs on the original nodes were normalized to have unit lengths. The following figures, * daily_EOF1.png * daily_EOF2.png * daily_EOF3.png show the first three EOFs obtained from daily data, assuming that corresponding PCs have the value of one standard deviation. The following two plots, * monthly_EOF1.png * monthly_EOF2.png show the leading EOFs for monthly mean data. EOF3 is omitted as it represents just a very small percentage of overall variance (1.7%).

Description: This dataset contains ice core-based estimates of volcanic stratospheric sulfur injections covering the years 500 BCE to 1900 CE. Ice core-derived volcanic sulfate deposition composites for Antarctica (Sigl et al., 2014) and Greenland (Sigl et al., 2015) are scaled to volcanic stratospheric sulfur injection based on a method similar to that of Gao et al., (2007). Sigl, M., Winstrup, M., McConnell, J. R., Welten, K. C., Plunkett, G., Ludlow, F., Büntgen, U., Caffee, M., Chellman, N., Dahl-Jensen, D., Fischer, H., Kipfstuhl, S., Kostick, C., Maselli, O. J., Mekhaldi, F., Mulvaney, R., Muscheler, R., Pasteris, D. R., Pilcher, J. R., Salzer, M., Schüpbach, S., Steffensen, J. P., Vinther, B. M. and Woodruff, T. E.: Timing and climate forcing of volcanic eruptions for the past 2,500 years, Nature, 523, 543-549, doi:10.1038/nature14565, 2015. Sigl, M., McConnell, J. R., Toohey, M., Curran, M., Das, S. B., Edwards, R., Isaksson, E., Kawamura, K., Kipfstuhl, S., Krüger, K., Layman, L., Maselli, O. J., Motizuki, Y., Motoyama, H., Pasteris, D. R. and Severi, M.: Insights from Antarctica on volcanic forcing during the Common Era, Nat. Clim. Chang., 4, 693-697, doi:10.1038/nclimate2293, 2014. Gao, C., Oman, L., Robock, A. and Stenchikov, G. L.: Atmospheric volcanic loading derived from bipolar ice cores: Accounting for the spatial distribution of volcanic deposition, J. Geophys. Res., 112(D9), doi:10.1029/2006JD007461, 2007.

Description: The data include daily, monthly, and seasonal variables of CORDEX experiments scaled down onto a ca. 50 km grid over Africa (acronym: AFR-44) based on the CCLM4-8-17 regional climate model. Each file contains a single variable and is formatted according to the CORDEX data protocol - meaning NetCDF-4 compressed, CF-1.4 compliant, with attributes and filenames according to the specified DRS. Data from any CORDEX experiment and with any CMIP5 global model forcing available and transfered from the ESGF to the long term archive WDCC at the time of publication are included. These are the experiments evaluation, historical, rcp85, and rcp45 using forcing data derived from the CMIP5 models MPI-ESM-LR, EC-EARTH, CNRM-CM5 and HadGEM2-ES. The data are provided on the model computational (native) grid.