ALBERT

Description: The two energy balance station run by Meteo-France/CNRM measured high-frequency (20 Hz) eddy-covariance raw data with a Solent-HS (Gill Instruments Ltd.) sonic anemometer and a LI-7500 (LI-COR Biosciences) hygrometer above the target land use type corn. The measuring set-up was continuously running during July 2007 in order to provide turbulent flux data of momentum, sensible and latent heat as well as carbon dioxide. Post-processing was performed using the software package TK2 (developed by the Department of Micrometeorology, University of Bayreuth) which produces quality assured turbulent flux data with an averaging interval of 30 min. The documentation and instruction manual of TK2 (see entry cops_nebt_ubt_info_1) and additional references about the applied flux corrections and post-field data quality control (see entry cops_nebt_ubt_info_2) as well as a document about the general handling of the flux data can be found in supplementary pdf-files within the energy balance and turbulence network (NEBT) experiment of the data base. The turbulent flux data in this data set are flagged according to their quality and checked for an impact of possible internal boundary layers. Additionally, the flux contribution from the target land use type intended to be observed to the total flux measured was calculated applying footprint modeling. Information and references about the internal boundary layer evaluation procedure and the footprint analysis are also given in additional info pdf-files. Pictures of the footprint climatology of the station as related to the land use and to the spatial distribution of the quality flags are included in the additional info pdf-file corresponding to the individual station.

Description: The energy balance stations run by University of Bayreuth continuously measured radiation and soil parameters over different land types with a sampling frequency of 1 Hz averaged to 1 min values within the data logger. After a check for plausibility the 1 min values have been averaged to 30 min intervals, which are provided in this data set. The instrumentation was different on each location. The following was measured depending on the station: - soil heat flux - soil temperature - volumetric soil water content - longwave radiation components - shortwave radiation components - tipping bucket rain gauge measurements The ground heat flux including the heat storage in the upper soil layer was determined from the measured soil heat flux, soil temperatures and volumetric soil water contents according to the 'simple measurement' (SM) method according to Liebethal and Foken (2007).

Description: The hydrological model DIMOSOP was run by University of Brescia with three different atmospheric forcings and different runoff forecast times. For more information on the model please contact the originator. Basins: Brenta at Bassano, Avisio at Stramentizzo, Noce at S.Giustina, Sarca at Maso Gobbo, Chiese at Lago Idro, Mella at Stocchetta, Oglio at Sarnico, Chiese at Malga Bissina, Lago d Arno, Lago d Avio, Cismon at Corlo, Toce at Candoglia, Rio del Sabbione at Sabbione, Gries at Morasco, T.Roni at Toggia, Rio d Arbola at Codelago, Melezzo at Masera, Bogna at Pontecaddo, Toce at Pontemaglio, Anza at Piedimulera, Isorno at Pontetto, Diveria at Crevoladossola, Ovesca at Villadossola, Anza at Ceppo Morelli, Diga Antrona, Ciampere at Avino, Ovesca at Alpe Cavalli, Devero at Agaro, Lago Busin, Lago Vannino, Taro at Pontetaro, Taro at S.Secondo, Cismon at Corlo

Description: Hydrological forecasts with hydrological model LARSIM (LARSIM=LArge Area Runoof Simulation Model, BY=Bavaria, Conceptual RR-model. Forecast depth: 72 hours.) for rivers Iller and Lech (DE) driven by numerical weather prediction models LME, GME, GFS. The runs were performed by "Wasserwirtschaftsamt Kempten" (WWA-KE).

Description: The goal of the experiment is to drive FEST, a rainfall-runoff distributed model with continuous soil moisture account, with ensemble forecasts from COSMO-LEPS (CLEPS) and with forecasts from ISACMOL2. The application domain is the Toce-Ticino and Maggia watershed. Hydrograph simulations and alerts are provided for Candoglia (Toce), Solduno (Maggia) and Bellinzona (Ticino). The runs were provided by Politecnico di Milano (PoliMi), Italy.