ALBERT

Description: Electronic waste (e-waste) management and recycling are gaining significant attention due to the presence of precious, critical, or strategic metals combined with the associated environmental burden of recovering metals from natural mines. Metal recovery from e-waste is being prioritized in metallurgical extraction owing to the fast depletion of natural mineral ores and the limited geographical availability of critical and/or strategic metals. Following collection, sorting, and physical pre-treatment of e-waste, electrochemical processes-based metal recovery involves leaching metals in an ionic form in a suitable electrolyte. Electrochemical metal recovery from e-waste uses much less solvent (minimal reagent) and shows convenient and precise control, reduced energy consumption, and low environmental impact. This critical review article covers recent progress in such electrochemical metal recovery from e-waste, emphasizing the comparative significance of electrochemical methods over other methods in the context of an industrial perspective.

Description: Based on mass and energy balance calculations, this work investigates the possibility of recovering heat and nutrients (nitrogen and phosphorus) from municipal sewage sludge using pyrolysis or combustion in combination with a gas scrubbing technology. Considering a wastewater treatment plant (WWTP) with 65,000 t/a of mechanically dewatered digestate (29% total solids), 550 t/a nitrogen and 500 t/a phosphorus were recovered from the 4900 t/a total nitrogen and 600 t/a total phosphorus that entered the WWTP. Overall, 3600 t/a (73%) of total nitrogen was lost to the air (as N2) and clean water, while 90 t/a (15%) of total phosphorus was lost to clean water released by the WWTP. Both in combustion and in pyrolysis, the nitrogen (3%) released within thermal drying fumes was recovered through condensate stripping and subsequent gas scrubbing, and together with the recovery of nitrogen from WWTP reject water, a total of 3500 t/a of ammonium sulfate fertilizer can be produced. Furthermore, 120 GWh/a of district heat and 9700 t/a of ash with 500 t/a phosphorus were obtained in the combustion scenario and 12,000 t/a of biochar with 500 t/a phosphorus was obtained in the pyrolysis scenario. The addition of a stripper and a scrubber for nitrogen recovery increases the total electricity consumption in both scenarios. According to an approximate cost estimation, combustion and pyrolysis require annual investment costs of 2–4 M EUR/a and 2–3 M EUR/a, respectively, while 3–5 M EUR/a and 3–3.5 M EUR/a will be generated as revenues from the products.

Description: The recycling target for plastics is expected to increase Europe-wide from 22.5% to 55% by 2025, hence the relevance of incentive schemes and the need to reach conclusions about how to encourage families to recycle more. Following this objective, a pilot project was implemented and a virtual reward token called RECICLOS created to encourage recycling among families, using incentives and awards to improve recycling behaviour and a webapp prototype to register the recycled plastic. By the end of the 6-week pilot project, 1053 families were registered on the scheme, representing 10% of the targeted population in the pilot area of the county of Pla de l’Estany, Catalonia, Spain. The novelties were the introduction of a token, the gamification of incentives through raffles and lotteries, webapp-based direct communication with citizens, and feedback after collecting and registering the recycled material. The multidimensional aspects of recycling activities, their strong relation with human behavioural patterns, and the high demand for communication and interaction mean that mobile technologies find significant application in this field. The results show that people can be influenced and their recycling habits changed by means of varied, effective, and innovative incentive schemes.

Description: The use of residual biomass of forest and/or agricultural origin is an increasingly common issue regarding the incorporation of materials that, until recently, were out of the typical raw material supply chains for the production of biomass pellets, mainly due to the quality constraints that some of these materials present. The need to control the quality of biomass-derived fuels led to the development of standards, such as ENplus®, to define the permitted limits for a set of parameters, such as the ash or alkali metal content. In the present study, samples of vine pruning, and ENplus®-certified pellets were collected and characterized, and the results obtained were compared with the limits presented in the standard. The values presented from vine pruning approximated the values presented by Pinus pinaster wood, the main raw material used in the production of certified pellets in Portugal, except for the values of ash, copper (Cu), and nitrogen (N) contents, with vine pruning being out of the qualifying limits for certification. However, it was found that the incorporation of up to 10% of biomass from vine pruning allowed the fulfillment of the requirements presented in the ENplus® standard, indicating a path for the implementation of circular economy processes in the wine industry.

Description: Considering economics and environmental sustainability, recycling of critical metals from end-of-life devices should be a priority. In this work the hydrometallurgical treatment of a spent automotive catalytic converter (SACC) using HCl with CaCl2 as a leaching medium, and solvent extraction (SX) with a thiodiglycolamide derivative, is reported. The aim was to develop a leaching scheme allowing high Pt recoveries and minimizing Al dissolution, facilitating the application of SX. The replacement of part of HCl by CaCl2 in the leaching step is viable, without compromising Pt recovery (in the range 75–85%), as found for the mixture 2 M CaCl2 + 8 M HCl when compared to 11.6 M HCl. All leaching media showed good potential to recover Ce, particularly for higher reaction times and temperatures. Regarding SX, results achieved with a model solution were promising, but SX for Pt separation from the real SACC solution did not work as expected. For the adopted experimental conditions, the tested thiodiglycolamide derivative in toluene revealed a very good loading performance for both Pt and Fe, but Fe removal and Pt stripping from the organic phases after contact with the SACC solution were not successfully accomplished. Hence, the reutilization of the organic solvent needs improvement.

Description: Laminated glass is ever more frequently used nowadays. This applies to the automobile industry and the construction industry. In cars, this refers mostly to the front and rear windows, whereas in construction, technical safety glass is used for railings and window glass. The task of this type of glass is to provide sufficient resistance against mechanical impact and unpleasant weather conditions. At the same time, if it is damaged, it has to break into the smallest possible pieces, or, wherever possible, the glass should remain intact on the interlayer film to prevent shards from injuring people and animals in the immediate vicinity. The paper deals with the recycling of laminated glass, especially with the effective separation of glass (in the form of cullet) from the polyvinyl butyral (PVB) interlayer film. The experimental research is focused on the mechanical separation of glass from the interlayer film by vibration, and also on the chemical cleaning of PVB film in order to allow subsequent recycling of both materials. The results quantify the efficiency of mechanical separation in the form of weight loss of the sample of laminated glass and define the particle size distribution of glass cullet, which is an important parameter in the possibility of glass recycling. The research leads to a methodology proposal for the separation of glass and PVB film and the design of equipment for this method.

Description: (1) Phosphorus (P) is an essential plant nutrient, and P deficiency negatively affects plant growth and development. Furthermore, P is a finite and nonrenewable resource, and there is an urgent need to recover P from some of the important waste streams in society. Newly engineered calcareous materials (sol–gel coated cat litter (CATSAN®)) can bind P from wastewater in decentralized treatment systems and potentially enable P recycling into agricultural production by direct addition of the P saturated material. (2) The effects of the addition of two P-enriched calcareous materials as fertilizers for maize (Zea mays L.) growth were investigated in a mesocosm experiment. We compared fertilization with the P-enriched materials at rates of 6, 12, 25, 50, 100 kg P ha−1 yr−1 with fertilization with commercial NPK fertilizer. (3) The P fertilization by the P-enriched materials had a significant positive effect on plant height, biomass, maximum light-saturated photosynthetic rate, respiration rate, and total P content in biomass. However, plants fertilized by the commercial NPK fertilizer performed significantly better in the majority of measured parameters at identical fertilization rates. (4) The bioavailability of the P bound to the calcareous material was very low. However, the studied material has the potential to be used as part of a decentralized treatment solution to remove and subsequently recover and recycle P from wastewater.

Description: While the total amount of municipal solid waste (MSW) in Dammam city was about 13 million tons in 2013, it is expected to reach about 18.4 million tons in 2025. Although the main problem in Dammam city is an increase in solid waste production without any formal treatment except landfilling, the lack of waste segregation greatly affects the residents’ handling practices of solid waste due to incorrect disposing practices. The objective of this study explored the possibility of Dammam residents’ participation in sorting and recycling to improve MSW handling and to measure the influence of psychological factors which affecting residents’ willingness to participate in waste handling regarding socioeconomic levels and moderating effects. This study also examined various respondents’ perspectives on sorting and recycling sustainable waste and the handling of waste generation. This study covered most Dammam communities, with a gender distribution of 56% males and 44% females and the monthly income ranging from SR700 to SR12,000. The descriptive analysis showed that of the 450 participants, 170 (37.8%) were in the middle-income levels, 199 (44.2%) were in the high-income levels and 81 (18%) were in the low-income levels. The moderating effect of income was observed between attitude and willingness to sort and recycle waste in the low-income levels and high-income levels groups. Additionally, an association was found between market incentives and willingness to sort and recycle waste in the low-income levels and high-income levels groups. The gender status of the participants had a moderating effect on the relationship between market incentives and willingness to sort and recycle waste in males and females. Additionally, the moderating effect of social influence on households’ willingness to sort and recycle waste was moderated by gender in males and females.

Description: Recycled concrete aggregate (RCA) collected from the demolition of old reinforced concrete structures can be reused to prepare structural and non-structural concrete, thereby protecting the environment by preserving natural resources. This study explores RCA’s use, collected from the crushed concrete of different building projects in Riyadh, to manufacture fresh self-compacting concrete (SCC) and investigate its properties in the fresh and hardened state. Four SCC mixes were prepared by replacing natural aggregate (NA) with RCA at 0%, 25%, 50%, and 75% replacement levels. The water-cement (w/c) ratio was maintained constant at 0.38 for all the mixes. Slump Flow, J-ring, and V-funnel tests were performed on the SCC mixes in the fresh state, and the compressive strength of hardened concrete was determined after seven, 14, and 28 days. Water absorption and split tensile tests were also carried out for all the mixes. The findings revealed that it is possible to reach compressive strengths higher than 40 MPa at 28 days for RCA replacement level of 75% by using a superplasticizer and low w/c ratio. The decrease in compressive strength concerning the SCC-NA mix was 25% for 75% replacement level. The highest split tensile strength at 28 days was around 3.3 MPa for a 50% replacement level. The lowest water absorption was 3.2% for SCC-NA, which was gradually increased and was highest at 5.6% for 75% replacement level.

Description: The volume of discarded solid wastes, especially plastic, which accumulates in large quantities in different environments, has substantially increased. Population growth and the consumption pattern of societies associated with unsustainable production routes have caused the pollution level to increase. Therefore, the development of materials that help mitigate the impacts of plastics is fundamental. However, bioplastics can result in a misunderstanding about their properties and environmental impacts, as well as incorrect management of their final disposition, from misidentifications and classifications. This chapter addresses the aspects and factors surrounding the biodegradation of bioplastics from natural (plant biomass (starch, lignin, cellulose, hemicellulose, and starch) and bacterial polyester polymers. Therefore, the biodegradation of bioplastics is a factor that must be studied, because due to the increase in the production of different bioplastics, they may present differences in the decomposition rates.