ALBERT

Description / Table of Contents: This eBook is the third in a series of books on the critical earthquake response of elastic or elastic-plastic structures under near-fault or long-duration ground motions, and includes four original research papers which were published in the specialty section Earthquake Engineering in ‘Frontiers in Built Environment’. Several extensions of the first eBook and the second eBook are included here. The first article is on the earthquake resilience of residential houses after repeated ground motions with high intensity. The 2016 Kumamoto earthquake brought a significant impact on the earthquake resilience of residential houses under repeated ground motions with high intensity in a few days. The necessary strength upgrade withstanding two repeated high-intensity ground motions was found to be 1.5. The second article is concerned with the smart enhancement of earthquake resilience of building structures under both near-fault and long-duration ground motions. A hybrid system of base-isolation and building connection control was proposed and its earthquake resilience to near-fault and long-duration ground motions was evaluated by a double impulse and a multiple impulse. It was demonstrated that the base-isolation is effective for near-fault ground motions and the building connection system using passive dampers is effective for long-duration ground motions. The third article is related to the robustness evaluation of elastic-plastic base-isolated high-rise buildings under resonant near-fault ground motions. The robustness function was introduced to evaluate quantitatively the robustness of elastic-plastic base-isolated high-rise buildings. The fourth article is an extension of the previously proposed energy balance approach to a bilinear elastic-plastic single-degree-of-freedom system under a long-duration sinusoidal ground motion. A historical difficulty in nonlinear vibration posed by Caughey (1960) and Iwan (1961) has been overcome in a smart manner after half a century. The approach presented in this eBook, together with the previous eBooks, is an epoch-making accomplishment to open the door for simpler and deeper understanding of structural reliability and resilience of built environments in the elastic-plastic and nonlinear range.

Description / Table of Contents: The CleanEra project was initiated with the goal of developing revolutionary ideas for civil aviation. These ideas were to offer solutions which would limit and reduce some of the negative aspects of aviation, namely: emissions and the use of resources. This book presents you with the highlights of this journey in search of new technologies for a revolutionary aircraft; an aircraft that not only offers a future of comfortable air travel for the passenger, but a future of sustainable aviation for the planet as well.

Description / Table of Contents: Chapter 1: General Aspects of the Cobalt Chemistry by Yasemin Yildiz --- Chapter 2: Synthesis, Processing, and Characterization of the Cobalt Alloys with Silicon Addition by Petrica Vizureanu, Mirabela Georgiana Minciuna, Gianina Iovan and Simona Stoleriu --- Chapter 3: Synthesis of Cobalt-Based Nanomaterials from Organic Precursors by Maria Smyrnioti and Theophilos Ioannides --- Chapter 4: Hydrothermally Produced Cobalt Oxide Nanostructures at Different Temperatures and Effect on Phase Transition Temperature and Threshold Voltage of Nematic Liquid Crystal Host by Hasan Eskalen, Süleyman Kerli and Şükrü Özgan --- Chapter 5: Substitution and Redox Properties of Some Organoisocyanide Cobalt(II) Complexes by Olayinka A. Oyetunji, Godiraone Tatolo, Banyaladzi D. Paphane and Clifford A. L. Becker --- Chapter 6: Effect of Cobalt on Morphology of Microhole Formed by Micropunching by Kelvii Wei Guo and Hon Yuen Tam --- Chapter 7: A Review of the Radionuclide, Cobalt-60, as a Fine-Sediment Tracer by Philip Greenwood

Description / Table of Contents: Increasing innovations and applications make microfluidics a versatile choice for researchers in many disciplines. This book consists of multiple review chapters that aim to cover recent advances and new applications of microfluidics in biology, electronics, energy, and materials sciences. It provides comprehensive views of various aspects of microfluidics ranging from fundamentals of fabrication, flow control, and droplet manipulation to the most recent exploration in emerging areas such as material synthesis, imaging and novel spectroscopy, and marriage with electronics. The chapters have many illustrations showcasing exciting results. This book should be useful for those who are eager to learn more about microfluidics as well as researchers who want to pick up new concepts and developments in this fast-growing field.

Description / Table of Contents: SHOCK COMPRESSION OF MATERIALS AND NEW MATERIALS SYNTHESIS / Akira B. Sawaoka / pp. 1-6 --- EXPLOSIVE TECHNIQUE FOR GENERATION OF HIGH DYNAMIC PRESSURE / Shuzo Fujiwara / pp. 7-21 --- TWO-STAGE LIGHT GAS GUN AS A HIGH PRESSURE TOOL FOR MATERIALS SCIENCE STUDY / Akira B. Sawaoka / pp. 23-31 --- A LAUNCH OF A PROJECTILE BY A TWO-STAGE LIGHT GAS GUN AND ITS OPTICAL OBSERVATION / Kunio Soga and Masao Shirouzu / pp. 33-47 --- RAIL GUN DEVELOPNENT AT TOKYO INSTITUTE OF TECHNOLOGY / Shu Usuba, ken-ichi Kondo and Akira B. Sawaoka / pp. 49-66 --- POWER SOURCES AND DIAGNOSTIC SYSTEM FOR RAILGUN / Yozo Kakudate, Shu Usuba, Masatake Yoshida, Katutoshi Aoki, Katsumi Tanaka, and Shyuzo Fujiwara / pp. 67-85 --- DIAMOND AND CUBIC BORON NITRIDE SYNTHESIS BY MEANS OF SHOCK-CONPRESSION / Nobuo Setaka and Tadao Sato / pp. 87-102 --- CHEMICAL EFFECTS OF SHOCK WAVES IN SOLIDS / Yasuhiko Syono / pp. 103-122

Description / Table of Contents: Die Region - mit den markanten Erhebungen des Hohen Meißners und des Thüringer Waldes - stellt geologisch und bergbaugeschichtlich einen Teil der deutschen Mittelgebirge dar, der Fachleute sowie Amateure und Naturfreunde gleichermaßen fasziniert. Die vorliegende Bibliographie versucht erstmals länderübergreifend die umfangreiche Fachliteratur der Dreiländer-Region zu erschließen. Dabei wurden sowohl fachwissenschaftliche als auch heimatkundliche Publikationen und unveröffentlichtes Material berücksichtigt.

Description / Table of Contents: The propulsion system behaviour is a key aspect for the overall dynamics of a ship. However, despite its great importance, numerical methodologies for detailed investigations on marine propulsion dynamics are not yet widely covered in scientific literature. This book presents the main steps for the development of a multi-physic simulation platform, able to represent the motions of a twin screw ship in six degrees of freedom, taking into account the whole propulsion system and automation effects. A number of mathematical sub-models had been developed and calibrated by a set of experimental tests, in model and full scale. Finally, the sea trials campaign of a ship is used to validate and tune the developed simulator. The proposed simulation methodology can be used in the ship preliminary design phase, in order to plan and test the propulsion system and automation. Further applications can include the design optimization and crew training.

Description / Table of Contents: INTRODUCTION --- Shock Compression Chemistry of materials, Y. Horie and A. B. Sawaoka, pp. 3-22 --- 1.1 The Nature of Shock Waves, pp. 3-5 --- 1.2 Compaction of Powders and Shock Activation, pp. 6-9 --- 1.3 First-Order Phase Transitions and Chemical Reactions, pp. 10-12 --- 1.4 Time Scales and Interactions of Basic Mechanisms, p. 12 --- 1.4.1 Shock propagation in a particle assemblage, p. 12 --- 1.4.2 Energy localization, pp. 12-13 --- 1.4.3 Thermal relaxation of hot spots, p. 14 --- 1.4.4 Mass diffusion in solids, p. 14 --- 1.4.5 Kinetic constants, pp. 14-16 --- 1.5 Some Roles of Shock Compression Techniques in Material Sciences Study, p. 16 --- 1.5.1 Shock compression technique as a tool of high pressure production, p. 16 --- 1.5.2 Appearance of diamond anvil-type high-pressure apparatus, pp. 16-18 --- 1.5.3 New roles of shock compression technology as a unique method of very high temperature production, pp. 18-19 --- 1.5.4 Development of conventional hypervelocity impact techniques for precise measurement of materials under shock compression, pp. 19-21 --- FUNDAMENTALS OF SHOCK WAVE PROPAGATION --- Shock Compression Chemistry of materials, Y. Horie and A. B. Sawaoka, pp. 23-78 --- 2.1 Hydrodynamic Jump Conditions and the Hugoniot Curve, pp. 23-32 --- 2.2 Shock Transition in Hydrodynamic Solids, pp. 32-42 --- 2.3 Non-Hydrostatic Deformation of Solids, p. 42 --- 2.3.1 Elastic-ideally-plastic solids, pp. 42-53 --- 2.3.2 Experimental observations of elastic-plastic behavior, pp. 53-56 --- 2.4 Wave-body interactions, pp. 56-57 --- 2.4.1 Preliminaries, pp. 57-60 --- 2.4.2 Planar impact of similar and dissimilar bodies, pp. 60-61 --- 2.4.3 Shock wave interaction with material boundaries, pp. 61-64 --- 2.4.4 Wave-wave interactions, pp. 65-66 --- 2.4.5 Detonation wave and interaction with a solid surface, pp. 66-77 --- SHOCK COMPRESSION TECHNOLOGY --- Shock Compression Chemistry of materials, Y. Horie and A. B. Sawaoka, pp. 79-115 --- 3.1 Gun Techniques, p. 80 --- 3.1.1 Single stage gun, p. 80 --- 3.1.2 Conventional two stage light gas gun, pp. 80-83 --- 3.1.3 Velocity measurement of projectile, p. 83 --- 3.1.4 Magnetoflyer method, pp. 83-84 --- 3.1.5 CW x-ray velocity meter, pp. 84-86 --- 3.1.6 Measurement of interior projectile motion, pp. 86-87 --- 3.1.7 Recovery experiments, pp. 87-89 --- 3.2 Explosive Techniques, p. 89 --- 3.2.1 Plane shock wave generation and recovery fixture, pp. 89-91 --- 3.2.2 Numerical simulaation of shock compression in the recovery capsule, pp. 91-94 --- 3.2.3 Cylindrical recovery fixture, pp. 94-95 --- 3.3 In-situ Measurements, p. 95 --- 3.3.1 Manganin pressure gauge, pp. 95-98 --- 3.3.2 Particle velocity gauge, pp. 99-100 --- 3.3.3 Observations of multiple shock reverberations by using a manganin pressure gauge and particle velocity gauge, pp. 100-106 --- 3.3.4 Shock temperature measurement, pp. 106-111 --- 3.3.5 Copper-Constantan thermocouple as a temperature and pressure gauge, pp. 111-113 --- THERMOMECHANICS OF POWDER COMPACTION AND MASS MIXING --- Shock Compression Chemistry of materials, Y. Horie and A. B. Sawaoka, pp. 117-170 --- 4.1 A One Dimensional Particulate Model, pp. 117-123 --- 4.2 Continuum Models, p. 123 --- 4.2.1 Hydrodynamic models, pp. 124-141 --- 4.2.2 Continuum plasticity theory, pp. 141-148 --- 4.2.3 Application, pp. 148-154 --- 4.3 Particle Bonding and Heterogeneous Processes, pp. 154-160 --- 4.4 Mass Mixing, pp. 160-169 --- THERMOCHEMISTRY OF HETEROGENEOUS MIXTURES --- Shock Compression Chemistry of materials, Y. Horie and A. B. Sawaoka, pp. 171-225 --- 5.1 Thermodynamic Functions of Heterogeneous Mixtures, pp. 172-187 --- 5.2 Analytical Equations of State, pp. 187-191 --- 5.3 Hugoniots of Inert Mixtures, p. 191 --- 5.3.1 Thermodynamically equilibrium models, pp. 191-197 --- 5.3.2 Mechanical models, pp. 197-199 --- 5.4 First-Order Phase Transitions, pp. 199-206 --- 5.5 Chemical Equilibria, pp. 206-212 --- 5.6 Reaction Kinetics, p. 212 --- 5.6.1 Rate equations, pp. 212-214 --- 5.6.2 Nucleation, pp. 214-216 --- 5.6.3 Growth, pp. 216-217 --- 5.6.4 Pressure effects, pp. 217-218 --- 5.7 Shock-Induced Reactions in Powder Mixtures, pp. 218-224 --- HYDRODYNAMICAL CALCULATIONS --- Shock Compression Chemistry of materials, Y. Horie and A. B. Sawaoka, pp. 227-276 --- 6.1 Conservation Equations of Continuum Flow, pp. 227-228 --- 6.1.1 Mass conservation, pp. 228-230 --- 6.1.2 Conservation of linear momentum, pp. 230-231 --- 6.1.3 Enegy conservation, pp. 231-234 --- 6.2 Constitutive Modeling of Inorganic Shock Chemistry, pp. 234-235 --- 6.2.1 VIR model, pp. 235-239 --- 6.2.2 Pore collapse, p. 239 --- 6.2.3 Chemical kinetics, pp. 239-240 --- 6.2.4 Computational constitutive reactions, pp. 240-245 --- 6.3 Applications of the VIR Model, p. 245 --- 6.3.1 Shock wave profiles in Ni/Al powder mixtures, pp. 245-250 --- 6.3.2 Compaction of diamond with Si and graphite, pp. 250-257 --- 6.4 Continuum Mixture Theory and the VIR Model, p. 257 --- 6.4.1 Continuum mixture theory, pp. 257-263 --- 6.4.2 Derivation of the VIR model using the CMT, pp. 263-269 --- 6.4.3 A model of heterogeneous flow, pp. 269-275 --- SHOCK CONDITIONING AND PROCESSING OF CERAMICS --- Shock Compression Chemistry of materials, Y. Horie and A. B. Sawaoka, pp. 277-360 --- 7.1 Shock Conditioning of Powder of Inorganic Materials, p. 227 --- 7.1.1 Brief review of shock conditioning studies, p. 227 --- 7.1.2 Aluminum oxide powder, pp. 277-281 --- 7.2 Shock Synthesis of Inorganic Materials, p. 281 --- 7.2.1 Shock synthesis studies, p. 281 --- 7.2.2 High dense forms of carbon, pp. 281-285 --- 7.2.3 High dense forms of boron nitride, pp. 285-287 --- 7.2.4 Shock treatment of boron nitride powders, pp. 287-301 --- 7.3 Shock Consolidation of Ceramic Powders, p. 301 --- 7.3.1 Why non-oxide ceramics?, pp. 301-302 --- 7.3.2 Dynamic consolidation of SiC powders, pp. 302-304 --- 7.3.3 Approach to the fabrication of crack free compacts, pp. 304-305 --- 7.3.4 Shock consolidation of SiC powder utilizing post shock heating by exothermic reaction, pp. 305-310 --- 7.4 Dynamic Compaction of Zinc Blende Type Boron Nitride and Diamond Powders, p. 310 --- 7.4.1 Background, pp. 310-311 --- 7.4.2 Cubic boron nitride, pp. 311-318 --- 7.4.3 Diamond, pp. 318-326 --- 7.4.4 Diamond composites obtained by utilizzing exothermic chemical reaction, pp. 326-332 --- 7.5 Very High Pressure Sintering of Shock Treated Powders, pp. 332-334 --- 7.5.1 Silicon nitride, pp. 334-336 --- 7.5.2 w-BN, pp. 336-346 --- 7.6 Rapid Condensation of High Temperature Ultrasupersaturated Gas, p. 346 --- 7.6.1 Silicon nitride, pp. 346-352 --- 7.6.2 Carbon, pp. 352-357

Description / Table of Contents: Die Region - mit den markanten Erhebungen des Hohen Meißners und des Thüringer Waldes - stellt geologisch und bergbaugeschichtlich einen Teil der deutschen Mittelgebirge dar, der Fachleute sowie Amateure und Naturfreunde gleichermaßen fasziniert. Die vorliegende Bibliographie versucht erstmals länderübergreifend die umfangreiche Fachliteratur der Dreiländer-Region zu erschließen. Dabei wurden sowohl fachwissenschaftliche als auch heimatkundliche Publikationen und unveröffentlichtes Material berücksichtigt.

Description / Table of Contents: Die Region - mit den markanten Erhebungen des Hohen Meißners und des Thüringer Waldes - stellt geologisch und bergbaugeschichtlich einen Teil der deutschen Mittelgebirge dar, der Fachleute sowie Amateure und Naturfreunde gleichermaßen fasziniert. Die vorliegende Bibliographie versucht erstmals länderübergreifend die umfangreiche Fachliteratur der Dreiländer-Region zu erschließen. Dabei wurden sowohl fachwissenschaftliche als auch heimatkundliche Publikationen und unveröffentlichtes Material berücksichtigt.