Abstract
Fabrication and properties of continuum carbon fibre-reinforced copper materials by controlled three-step electrodeposition are described. The effects of processing parameters, i.e. hot-pressing temperature, pressure and duration, and reinforcement content, on the properties of composites are discussed. An alloying element, nickel, was introduced into the C/Cu interface to enhance the composite strength. Finally, the relatively optimum production parameters (i.e. 30 wt% fibre, 700°C, 40 min and 10 MPa) are suggested.
Similar content being viewed by others
References
C. T. LYNCH and J. P. KERSHAW, “Metal Matrix Composites” (CRC Press, Ohio, 1972).
P. W. JACKSON, A. A. BAKER, D. CRATCHLEY and P. J. WALKER, Powder Metall. 2(21) (1968) 1.
D. A. MORTMER and M. NICHOLAS, J. Mater. Sci. 5 (1970) 149.
Z. ZHU, in “Proceedings of the 1994 International Conference and Exhibition on Powder Metallurgy and Particulate Materials”, 8–11 May 1994, Toronto, Canada.
J. P. GUTROW, Wear 12 (1968) 91.
J. C. WITHER and E. F. ABRAMS, Plating 1 (1968) 605.
A. A. BAKER, J. T. HARRIS and E. HOLMS, Metals Mater. 2 (1967) 211.
W. H. SCHAEFER and I. L. CHRISTIAN, AFML-TR-69-36, Vol. 3 (1969) p. 1.
R. R. IRVING, Iron Age 1 (1983) 35.
R. WARREN et al., J. Mater. Sci. 13 (1978) 178.
P. W. HEITMAN et al., J. Mech. Phys. Solids 21 (1973) 75.
S. OCHIAI et al., in “Proceedings of the ICCM-IV, Progress in Science and Engineering of Composites”, Tokyo (1982) p. 1331.
H. KOBAYASHI, Carbon 60 (1970) 21 (in Japanese).
G. BLANKENBURGS, J. Austr. Inst. Metal. 14 (1969) 23.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
ZHU, Z., KUANG, X., CAROTENUTO, G. et al. Fabrication and properties of carbon fibre-reinforced copper composite by controlled three-step electrodeposition. Journal of Materials Science 32, 1061–1067 (1997). https://doi.org/10.1023/A:1018542809294
Published:
Issue Date:
DOI: https://doi.org/10.1023/A:1018542809294