Abstract
In order to predict the effect of small-scale interfacial debonding on the energy release rate at a crack tip for mode I fracture of a fibre with a cracked coating layer, an approximate calculation method has been presented. The relation of debonding length, thickness of the coating layer and ratio of elastic modulus of the coating layer to that of the fibre, to the energy release rate of the fibre was calculated for some examples. It was demonstrated that small-scale debonding reduces the energy release rate and, therefore, effectively prevents reduction in fibre strength.
Similar content being viewed by others
References
A. G. Metcalfe and M. J. Klein, in “Interface in Metal Matrix Composites”, edited by A. G. Metcalfe (Academic Press, New York, 1974) pp. 125–68.
J. A. Dicarlo, in “Proceedings, Mechanical Behaviour of Metal/Matrix Composites”, edited by J. E. Hack and M. F. Amateau (AIME, Worrendale, PA, 1983) pp. 1–14.
S. Ochiai, K. Osamura and Y. Murakami, in “Progress in Science and Engineering of Composites”, edited by T. Hayashi, K. Kawata and S. Umekawa, (Japan Society for Composite Materials, Tokyo, 1982) pp. 1331–8.
I. H. Khan, Metall Trans. 7A (1976) 1281.
W. H. Hunt Jr, in “Interfaces in Metal-Matrix Composites”, edited by A. K. Dhingra and S. G. Fishman (Metallurgical Society, Warrendale, PA, 1986) pp. 3–25.
M. Kh. Shoroshorov, L. M. Ustinov, A. M. Zirlin, V. I. Olefilenko and L. V. Vinogradov, J. Mater. Sci. 14 (1979) 1850.
S. Ochiai, S. Urakawa, K. Ameyama and Y. Murakami, Metall. Trans. 11A (1980) 525.
S. Ochiai and K. Osamura, J. Mater. Sci. 23 (1988) 886.
Idem, Metall. Trans. 21A (1990) 971.
H. Tada, P. C. Paris and G. R. Irwin, in “The Stress Analysis Handbook”, edited by H. Tada, P. C. Paris and G. R. Irwin (Del Research Corporation, Hellertown, PA, 1973) pp. 1–31.
J. M. Hedgepeth, NASA TN D-882 (1961).
S. Ochiai and K. Osamura, J. Mater. Sci. 24 (1989) 3865.
C. Zweben, Eng. Frac. Mech. 6 (1974) 1.
E. D. Reedy Jr, Mech. Phys. Solids 28 (1980) 265.
J. G. Goree and R. S. Gross, Eng. Fract. Mech. 13 (1980) 563.
J. A. Narin, J. Compos. Mater. 22 (1988) 561.
H. Fukuda, in “Achievement in Composites in Japan and the United States”, Proceedings of Japan-US CCM-V, edited by A. Kobayashi (Japan Society for Composite Materials, Tokyo, 1990) pp. 529–34.
N. F. Dow, GEC Missile and Space Division, Report R63SD61, quoted by G. S. Holister and C. Thomas, in “Fiber Reinforced Materials” (Elsevier, London, 1966) p. 23.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ochiai, S., Hojo, M. Reduction in energy release rate for mode I fracture of a fibre with a cracked coating layer due to small-scale interfacial debonding. JOURNAL OF MATERIALS SCIENCE 31, 2027–2034 (1996). https://doi.org/10.1007/BF00356622
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF00356622