Abstract
X-ray diffraction, derivatographic analysis, and the BET method are used to study the processes of synthesis of sialons by carbothermal reduction and simultaneous nitriding of kaolin of the Kyshtymskoe deposit. The synthesis is performed by roasting a mixture of kaolin with colloidal graphite S-1 poured freely or pressed into specimens in a discontinuous-flow furnace with a graphite heater. The influence of the synthesis conditions on the phase composition, the specific surface of the powders, the gas permeability, and the pore size in sialon specimens is established. It is shown that when pressings fabricated from kaolin mixed with graphite S-1 are roasted in nitrogen, the resulting material can have a porosity of 60% with pores < 1 μm in size and a gas permeability of 0.02 – 0.08 μm2, which can become a basis for developing a technology of membrane materials.
Similar content being viewed by others
REFERENCES
I. Ya. Guzman and M. F. Lisov, “Sialons: ceramic materials based on new four-component phases in the Si – Al – O – N system,” Zh. VKhO Im. D. I. Mendeleeva, No. 5, 73–77 (1982).
I. L. Boyarin, A. B. Puchkov, A. M. Gavrish, et al., “Sialon: A new refractory material,” Ogneupory, No. 12, 24–28 (1981).
V. P. Paranosenkov, O. P. Podvigina, I. L. Shkarupa, et al., “Ceramics based on α-sialon,” Ogneup. Tekh. Keram., No. 6, 11–13 (1998).
V. A. Gunchenko, M. S. Koval'chenko, and G. V. Trunov, “Structure and some physicomechanical properties of sintered ß-sialons,” Poroshk. Metall., No. 5, 30–33 (1988).
V. A. Izhevskii and M. S. Koval'chenko, “Additional heat treatment of sintered ceramics based on ß-sialons,” Poroshk. Metall., No. 6, 69–74 (1993).
K. J. D. Mackenzie, R. H. Meinkold, G. V. White, and C. M. Sheppard, “Carbothermal formation of α-sialon from kaolinite and halloysite,”J. Mater. Sci., 29(10), 2611–2619 (1994).
G. P. Shveikin and V. A. Perelyaev, “Treatment of mineral and technogenic raw materials by carbothermal reduction,” Izv. Ross. Akad. Nauk, Ser. Khim., No. 2, 223–245 (1997).
E. V. Degtyarev, I. L. Boyarina, A. B. Puchkov, Z. D. Zhukova, and A. M. Gavrish, “A method for fabricating sialon,” USSR Inventor's Certificate No. 1054333, Otkr. Izobr., No. 42 (1983).
Qui Kehui Cao Aihong and V. Gabis, “Research on synthesis of high purity ß-sialon powder from kaolin,” Mater. Sci. Eng., 14(3), 34–36 (1996).
S. B. Hanna and N. M. Ghoneim, “Formation of ß-sialon from kaolin and rice hulls,” Interceram., No. 5, 42–45 (1986).
S. Wild, “A novel route for the production of-ß'sialon powders,” J. Mater. Sci., No. 11, 1972–1974 (1976).
S. S. Ordan'yan, K. P. Andreev, and E. K. Stepanenko, “Effect of mechanical activation upon vibromilling on the sintering and the properties of mullite ceramics,” Zh. Prikl. Khim., Issue 12, 1978–1982 (1998).
N. Puscasu and M. Hagiopol, “Ceramic products for hydrogen sintering kilns,” Ceram. Ind. Int., 102(1093), C19, 22–23 (1992).
P. P. Pikuza, I. E. Kir'yakova, E. S. Lugovskaya, and D. V. Shchur, “High-temperature interaction of kaolin with carbon in a nitrogen medium,” Khim. Tekhnol., No. 1, 50–53 (1989).
T. Brock, Membrane Filtration. A User's Guide and Reference Manual, Science Technical Incorporation, Madison (U.S.) (1983).
V. N. Antsiferov and V. G. Gilev, “Ceramic membranes from reaction-sintered silicon nitride on nitride and oxide substrates,” Ogneup. Tekh. Keram., No. 12, 9–12 (1998).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Antsiferov, V.N., Gilev, V.G., Bekker, V.Y. et al. A Study of Sialon Synthesis from Kaolin by Carbothermal Reduction and Simultaneous Nitriding. Refractories and Industrial Ceramics 41, 338–344 (2000). https://doi.org/10.1023/A:1011372820939
Issue Date:
DOI: https://doi.org/10.1023/A:1011372820939