Abstract
The effect of preliminary injection (pre-injection) of a gas (heated air, methane, or ethylene) ahead of the entrance of a three-dimensional inlet in a supersonic flow with Mach numbers M∞ = 2–4, stagnation temperature T * = 300 K, and flow rates of the injected gas corresponding to 0–6% of the flow rate of air through the inlet is numerically studied. The gas is injected through orifices located behind the base surfaces of pylons mounted upstream of the inlet entrance. The computations are performed by the ESI-FASTRAN software package, which allows one to calculate three-dimensional viscous turbulent gas flows by a time-dependent method with the use of the Reynolds-averaged Navier–Stokes equations. Experimental investigations of pre-injection are performed with the use of small-scale and large-scale inlet models at M∞ = 3–4 and 6. A positive effect of pre-injection on stable (without stalling) deceleration of the incident flow in the case of mass supply and on initiation of ignition and stable combustion in the combustion chamber is confirmed.
Similar content being viewed by others
References
J. Schetz, “Injection and Mixing in Turbulent Flow,” Prog. Astronaut. Aeronaut. 68 (1980).
J. M. Seiner, S. M. Dash, and D. C. Kenzakovich, “Historical Survey on Enhanced Mixing in Scramjet Engines,” AIAA Paper No. 99-4869 (1999).
S. Gallimore, L. Jabobsen, W. O’Brien, and J. Schetz, “Operational Sensitivities of an Integrated Scramjet Ignition/Fuel Injection System,” J. Propul. Power 19 (2), 183–189 (2003).
B. Parent and J. Sislian, “Effect of Geometrical Parameters on the Mixing Performance of Cantilevered Ramp Injectors,” AIAA J. 41 (3), 448–456 (2003).
E. J. Gutmark, K. S. Schadow, and K. H. Yu, “Mixing Enhancement in Supersonic Free Shear Layer Flows,” J. Annu. Rev. Fluid Mech. 27, 375–417 (1995).
V. A. Vinogradov, “Review of Russian Hydrocarbon Fueled Scramjet Technology,” in Workshop on Russian Hypersonic Technologies, APL-JHU, 1997.
V. A. Vinogradov and A. G. Prudnikov, “Injection of Liquid into the Strut Shadow at Supersonic Velocities,” SAE Paper No. 931455 (1993).
O. V. Guoskov, V. I. Kopchenov, K. E. Lomkov, V. A. Vinogradov, and P. J. Waltrup, “Numerical Researches of Gaseous Fuel Pre-Injection in Hypersonic 3-D Inlet,” J. Propul. Power 17 (6), 1162–1169 (2001).
V. A. Vinogradov, Yu. M. Shikhman, R. V. Albegov, and G. K. Vedeshkin, “Experimental Research of Pre-Injected Methane Combustion in High Speed Airflow,” AIAA Paper No. 2003-6940 (2003).
T. Livingston, C. Segal, M. Schindler, and V. A. Vinogradov, “Penetration and Spreading of Liquid Jets in an External-Internal Compression Inlet,” AIAA J. 38 (6), 989–994 (2000).
M. Owens, S. Mullargili, C. Segal, and V. A. Vinogradov, “Effect of Kerosene Pre-Injection on Combustion Flameholding in a Mach 1.6 Airflow,” J. Propul. Power 17 (3), 605–611 (2001).
V. A. Vinogradov, Yu. M. Shikhman, and S. Corin, “Fuel Pre-Injection in a Dual Mode Scramjet: an Overview,” AIAA Paper No. 1030-2006 (2006).
V. A. Vinogradov, Yu. M. Shikhman, and C. Segal, “A Review of Fuel Pre-Injection in Supersonic, Chemically Reacting Flows,” Appl. Mech. Rev. 60 (4), 139–148 (2007).
A. B. Freeborn, P. King, and M. R. Gruber, “Swept-Leading Edge Pylon Effects on a Scramjet Pylon-Cavity Flameholder Flowfield,” J. Propul. Power 25 (3), 571–582 (2009).
C. Aguilera, B. Pang, A. Ghosh, et al., “Supersonic Mixing Enhancement and Optimization Using Fin-Guided Fuel Injection,” AIAA Paper No. 2010-1526 (2010).
H. Tahakasha, Q. Tu, and C. Segal, “Effect of Pylon-Aided Fuel Injection on Mixing in a Supersonic Flowfield,” J. Propul. Power 26 (5), 1092–1101 (2010).
J. B. Star, J. Edwards, Jr, M. K. Smart, and R. A. Baurle, “Numerical Simulation of Scramjet Combustion in a Shock Tunnel,” AIAA Paper No. 2005-0428 (2005).
J. C. Turner and M. K. Smart, “Application of Inlet Injection to a Three-Dimensional Scramjet at Mach 8,” AIAA J. 48 (4), 829–838 (2010).
V. A. Vinogradov and V. A. Stepanov, “Numerical and Experimental Study of Inlet Flow Field with Gas Jet Injection,” in Asian Joint Conf. on Engine and Propulsion, AJCEP-22202, 2006.
ESI Group CFD—ACE, CFD—FASTRAN (2010); https://www.esi-group.com/.
V. E. Kozlov, A. N. Sekundov, and I. P. Smirnova, “Turbulence Models for the Description of a Compressible Gas Jet Flow,” Izv. Ross. Akad. Nauk, Mekh. Zhidk. Gaza, No. 6, 38–44 (1986).
M. B. Colcet III and L. J. Spadaccini, “Scramjet Fuels Autoignition Study,” J. Propul. Power 17 (2), 315–323 (2001).
V. A. Vinogradov, A. N. Prokhorov, and V. A. Skibin, “Year in Review,” J. Aerospace Amer., No. 12, 49 (2011).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.A. Vinogradov, A.Yu. Makarov, I.V. Potekhina, V.V. Stepanov.
Published in Fizika Goreniya i Vzryva, Vol. 53, No. 5, pp. 40–52, September–October, 2017.
Rights and permissions
About this article
Cite this article
Vinogradov, V.A., Makarov, A.Y., Potekhina, I.V. et al. Numerical and experimental study of fuel pre-injection in the inlet of a high-velocity air-breathing engine. Combust Explos Shock Waves 53, 526–537 (2017). https://doi.org/10.1134/S0010508217050057
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0010508217050057