Abstract
The rise of biomass-derived nanocellulose addresses the sustainability criteria now demanded of new materials, which have been widely overlooked in the plastics era—renewability, abundance, biodegradability, and recyclability. Cellulose nanofibers have conventionally been extracted from wood products, supported by an established forestry infrastructure, but the drive for biomass sustainability has encouraged researchers to explore non-wood sources over the past 15 years. Non-wood sources, including agricultural residues and industrial wastes, offer an attractive alternative due to their abundance, fast generation, and low starting value. Moreover, agricultural residues can improve the sustainability of cellulose nanofiber processing from multiple angles. The biochemical composition of the typical agricultural residue, which is lower in lignin and higher in hemicellulose than wood stems, improves the fibrillation efficiency of cellulose bundles into nano-scale fibers. In addition, agricultural residues yield high biomass volume from short growth cycles with improved land utilisation, whilst offsetting environmental issues associated with their current uses. In this work, we performed a comprehensive literature evaluation of the biomass sources used to produce cellulose nanofibers. Of the 3358 cellulose nanofiber publications from 2004 to 2018 with an identifiable source material, 57% were derived from wood-based biomass and 30% from non-wood biomass, with 100 unique biomass sources identified. Furthermore, the top research fields associated with non-wood publications included general characterisation (36%), plastic nanocomposites (19%), bionanocomposites (9%), biomedical products (8%), and electronic devices (6%). As social, political and economic drivers reinforce sustainability as a key focus in nanocellulose production, this bibliometric resource provides a timely snapshot of the sustainability trends in cellulose nanofiber research.
Similar content being viewed by others
References
Abdul Khalil HPS, Bhat AH, Abu Bakar A et al (2015) Cellulosic nanocomposites from natural fibers for medical applications: a review. In: Pandey JK, Takagi H, Nakagaito AN, Kim H-J (eds) Handbook of polymer nanocomposites. processing, performance and application: volume c: polymer nanocomposites of cellulose nanoparticles, processing, performance and application. Springer, Berlin, pp 475–511
Abdul Khalil HPS, Davoudpour Y, Saurabh CK et al (2016) A review on nanocellulosic fibres as new material for sustainable packaging: process and applications. Renew Sustain Energy Rev 64:823–836. https://doi.org/10.1016/j.rser.2016.06.072
Adel AM, El-Gendy AA, Diab MA et al (2016) Microfibrillated cellulose from agricultural residues. Part I: papermaking application. Ind Crops Prod 93:161–174. https://doi.org/10.1016/j.indcrop.2016.04.043
Alila S, Besbes I, Vilar MR et al (2013) Non-woody plants as raw materials for production of microfibrillated cellulose (MFC): a comparative study. Ind Crops Prod 41:250–259. https://doi.org/10.1016/j.indcrop.2012.04.028
Anagnost SE, Mark RE, Hanna RB (2002) Variation of microfibril angle within individual tracheids. Wood Fiber Sci 34:337–349
Asper M, Hanrieder T, Quellmalz A, Mihranyan A (2015) Removal of xenotropic murine leukemia virus by nanocellulose based filter paper. Biologicals 43:452–456. https://doi.org/10.1016/j.biologicals.2015.08.001
Balea A, Merayo N, De La Fuente E et al (2017) Assessing the influence of refining, bleaching and TEMPO-mediated oxidation on the production of more sustainable cellulose nanofibers and their application as paper additives. Ind Crops Prod 97:374–387. https://doi.org/10.1016/j.indcrop.2016.12.050
Benítez AJ, Walther A (2017) Cellulose nanofibril nanopapers and bioinspired nanocomposites: a review to understand the mechanical property space. J Mater Chem A 5:16003–16024. https://doi.org/10.1039/c7ta02006f
Boufi S (2017) Agricultural crop residue as a source for the production of cellulose nanofibrils. Cellul Nanofibre Compos. https://doi.org/10.1016/B978-0-08-100957-4.00006-1
Chaker A, Alila S, Mutje P et al (2013) Key role of the hemicellulose content and the cell morphology on the nanofibrillation effectiveness of cellulose pulps. Cellulose 20:2863–2875. https://doi.org/10.1007/s10570-013-0036-y
Chaker A, Mutjé P, Vilar MR, Boufi S (2014) Agriculture crop residues as a source for the production of nanofibrillated cellulose with low energy demand. Cellulose 21:4247–4259. https://doi.org/10.1007/s10570-014-0454-5
Chen C, Hu L (2018) Nanocellulose toward advanced energy storage devices: structure and electrochemistry. Acc Chem Res 51:3154–3165. https://doi.org/10.1021/acs.accounts.8b00391
Chen YW, Lee HV (2018) Revalorization of selected municipal solid wastes as new precursors of “green” nanocellulose via a novel one-pot isolation system: a source perspective. Int J Biol Macromol 107:78–92. https://doi.org/10.1016/j.ijbiomac.2017.08.143
Chen Y, Geng B, Ru J et al (2017) Comparative characteristics of TEMPO-oxidized cellulose nanofibers and resulting nanopapers from bamboo, softwood, and hardwood pulps. Cellulose 24:4831–4844. https://doi.org/10.1007/s10570-017-1478-4
Courchene CE, Peter GF, Litvay J (2005) Cellulose microfibril angle as a determinant of paper strength and hygroexpansivity in Pinus taeda L. Wood Fiber Sci 38:112–120
Das IK, Rakshit S (2016) Millets, their importance, and production constraints. In: Padmaja PG, Das IK (eds) Biotic stress resistance in millets. Academic Press, New York, pp 3–19
Davis CS, Grolman DL, Karim A, Gilman JW (2015) What do we still need to understand to commercialize cellulose nanomaterials? Green Mater 3:53–58. https://doi.org/10.1680/jgrma.15.00013
Delgado-Aguilar M, González I, Tarrés Q et al (2016) The key role of lignin in the production of low-cost lignocellulosic nanofibres for papermaking applications. Ind Crops Prod 86:295–300. https://doi.org/10.1016/j.indcrop.2016.04.010
Fahma F, Iwamoto S, Hori N et al (2010) Isolation, preparation, and characterization of nanofibers from oil palm empty-fruit-bunch (OPEFB). Cellulose 17:977–985. https://doi.org/10.1007/s10570-010-9436-4
FAOSTAT (2019) FAOSTAT statistical database
Farahbakhsh N, Roodposhti PS, Ayoub A et al (2015) Melt extrusion of polyethylene nanocomposites reinforced with nanofibrillated cellulose from cotton and wood sources. J Appl Polym Sci. https://doi.org/10.1002/app.41857
Favier V, Canova GR, Cavaille JY et al (1995a) Nanocomposite materials from latex and cellulose whiskers. Polym Adv Technol 6:351–355
Favier V, Chanzy H, Cavaillé JY (1995b) Polymer nanocomposites reinforced by cellulose whiskers. Macromolecules 28:6365–6367. https://doi.org/10.1021/ma00122a053
Ferraz N, Carlsson DO, Hong J et al (2012a) Haemocompatibility and ion exchange capability of nanocellulose polypyrrole membranes intended for blood purification. J R Soc Interface 9:1943–1955. https://doi.org/10.1098/rsif.2012.0019
Ferraz N, Straømme M, Fellström B et al (2012b) In vitro and in vivo toxicity of rinsed and aged nanocellulose-polypyrrole composites. J Biomed Mater Res Part A 100A:2128–2138. https://doi.org/10.1002/jbm.a.34070
Ferrer A, Filpponen I, Rodríguez A et al (2012a) Valorization of residual Empty Palm Fruit Bunch Fibers (EPFBF) by microfluidization: production of nanofibrillated cellulose and EPFBF nanopaper. Bioresour Technol 125:249–255. https://doi.org/10.1016/j.biortech.2012.08.108
Ferrer A, Quintana E, Filpponen E et al (2012b) Effect of residual lignin and heteropolysaccharides in nanofibrillar cellulose and nanopaper from wood fibers. Cellulose 19:2179–2193. https://doi.org/10.1007/s10570-012-9788-z
FitzPatrick M, Champagne P, Cunningham MF, Whitney RA (2010) A biorefinery processing perspective: treatment of lignocellulosic materials for the production of value-added products. Bioresour Technol 101:8915–8922. https://doi.org/10.1016/j.biortech.2010.06.125
García A, Gandini A, Labidi J et al (2016) Industrial and crop wastes: a new source for nanocellulose biorefinery. Ind Crops Prod 93:26–38. https://doi.org/10.1016/j.indcrop.2016.06.004
Gardner KH, Blackwell J (1974) The structure of native cellulose. Biopolymers 13:1975–2001. https://doi.org/10.1002/bip.1974.360131005
Gassan J, Chate A, Bledzki AK (2001) Calculation of elastic properties of natural fibers. J Mater Sci 36:3715–3720. https://doi.org/10.1023/A:1017969615925
Gupta A, Verma JP (2015) Sustainable bio-ethanol production from agro-residues: a review. Renew Sustain Energy Rev 41:550–567. https://doi.org/10.1016/j.rser.2014.08.032
Habibi Y (2014) Key advances in the chemical modification of nanocelluloses. Chem Soc Rev 43:1519–1542. https://doi.org/10.1039/c3cs60204d
Hassan ML, Mathew AP, Hassan EA et al (2012) Nanofibers from bagasse and rice straw: process optimization and properties. Wood Sci Technol 46:193–205. https://doi.org/10.1007/s00226-010-0373-z
Hayes MHB, Mylotte R, Swift RS (2017) Humin: its composition and importance in soil organic matter, 1st edn. Elsevier Inc, New York
Hessler LE, Merola GV, Berkley EE (1948) Degree of polymerization of cellulose in cotton fibers. Text Res J 18:628–634
Hosseinmardi A, Annamalai PK, Wang L et al (2017) Reinforcement of natural rubber latex using lignocellulosic nanofibers isolated from spinifex grass. Nanoscale 9:9510–9519. https://doi.org/10.1039/C7NR02632C
Huang HJ, Ramaswamy S, Tschirner UW, Ramarao BV (2008) A review of separation technologies in current and future biorefineries. Sep Purif Technol 62:1–21. https://doi.org/10.1016/j.seppur.2007.12.011
Jiang Y, Liu X, Yang Q et al (2018) Effects of residual lignin on mechanical defibrillation process of cellulosic fiber for producing lignocellulose nanofibrils. Cellulose 25:6479–6494. https://doi.org/10.1007/s10570-018-2042-6
Jiang Y, Liu X, Yang Q et al (2019) Effects of residual lignin on composition, structure and properties of mechanically defibrillated cellulose fibrils and films. Cellulose 26:1577–1593. https://doi.org/10.1007/s10570-018-02229-4
Jonoobi M, Oladi R, Davoudpour Y et al (2015) Different preparation methods and properties of nanostructured cellulose from various natural resources and residues: a review. Cellulose 22:935–969. https://doi.org/10.1007/s10570-015-0551-0
Jorfi M, Foster EJ (2015) Recent advances in nanocellulose for biomedical applications. J Appl Polym Sci 132:1–19. https://doi.org/10.1002/app.41719
Kalia S, Dufresne A, Cherian BM et al (2011) Cellulose-based bio- and nanocomposites: a review. Int J Polym Sci 2011:35. https://doi.org/10.1155/2011/837875
Kampeerapappun P (2012) Preparation characterization and antimicrobial activity of electrospun nanofibers from cotton waste fibers. Chiang Mai J Sci 39:712–722
Kargarzadeh H, Mariano M, Huang J et al (2017) Recent developments on nanocellulose reinforced polymer nanocomposites: a review. Polymer (Guildf) 132:368–393. https://doi.org/10.1016/J.POLYMER.2017.09.043
Kargarzadeh H, Mariano M, Gopakumar D et al (2018) Advances in cellulose nanomaterials. Springer, Netherlands
Kenney KL, Smith WA, Gresham GL, Westover TL (2013) Understanding biomass feedstock variability. Biofuels 4:111–127. https://doi.org/10.4155/bfs.12.83
Konandreas P, Schmidhuber J (2007) Global biofuel production trends and possible implications for Swaziland
Kumar P, Barrett DM, Delwiche MJ, Stroeve P (2009) Methods for pretreatment of lignocellulosic biomass for efficient hydrolysis. Ind Eng Chem Res 48:3713–3729
Kumar A, Singh SP, Singh AK (2016) Comparative study of cellulose nanofiber blending effect on properties of paper made from bleached bagasse, hardwood and softwood pulps. Cellulose 23:2663–2675. https://doi.org/10.1007/s10570-016-0954-6
Laftah WA, Wan Abdul Rahman WA (2016) Pulping process and the potential of using non-wood pineapple leaves fiber for pulp and paper production: a review. J Nat Fibers 13:85–102. https://doi.org/10.1080/15440478.2014.984060
Lavoine N, Desloges I, Dufresne A, Bras J (2012) Microfibrillated cellulose—its barrier properties and applications in cellulosic materials: a review. Carbohydr Polym 90:735–764. https://doi.org/10.1016/j.carbpol.2012.05.026
Lee SH, Chang F, Inoue S, Endo T (2010) Increase in enzyme accessibility by generation of nanospace in cell wall supramolecular structure. Bioresour Technol 101:7218–7223. https://doi.org/10.1016/j.biortech.2010.04.069
Lessard G, Chouinard A (1980) In: Bamboo research in Asia: proceedings of a workshop held in Singapore, 28–30 May 1980. IDRC, Ottawa, ON, CA
Li S, Bashline L, Lei L (2014) Cellulose synthesis and its regulation. The Arabidopsis Book/American Society of Plant Biologists. https://doi.org/10.1199/tab.0169
Liu X, Jiang Y, Qin C et al (2018) Enzyme-assisted mechanical grinding for cellulose nanofibers from bagasse: energy consumption and nanofiber characteristics. Cellulose 25:7065–7078. https://doi.org/10.1007/s10570-018-2071-1
Madsen B, Gamstedt EK (2013) Wood versus plant fibers: similarities and differences in composite applications. Adv Mater Sci Eng 2013:1–14. https://doi.org/10.1155/2013/564346
Makavana JM, Agravat VV, Balas PR et al (2018) Engineering properties of various agricultural residue. Int J Curr Microbiol Appl Sci 7:2362–2367. https://doi.org/10.20546/ijcmas.2018.706.282
Malucelli LC, Matos M, Jordão C et al (2018) Grinding severity influences the viscosity of cellulose nanofiber (CNF) suspensions and mechanical properties of nanopaper. Cellulose 25:6581–6589. https://doi.org/10.1007/s10570-018-2031-9
Mayer-Laigle C, Blanc N, Rajaonarivony R, Rouau X (2018) Comminution of dry lignocellulosic biomass, a review: part I. From fundamental mechanisms to milling behaviour. Bioengineering 5:41. https://doi.org/10.3390/bioengineering5020041
Metreveli G, Wågberg L, Emmoth E et al (2014) A size-exclusion nanocellulose filter paper for virus removal. Adv Healthc Mater 3:1546–1550. https://doi.org/10.1002/adhm.201300641
Miao Z, Grift TE, Hansen AC, Ting KC (2011) Energy requirement for comminution of biomass in relation to particle physical properties. Ind Crops Prod 33:504–513. https://doi.org/10.1016/j.indcrop.2010.12.016
Milanez DH, Noyons E, de Faria LIL (2016) A delineating procedure to retrieve relevant publication data in research areas: the case of nanocellulose. Scientometrics 107:627–643. https://doi.org/10.1007/s11192-016-1922-5
Miller J (2015) Nanocellulose State of the industry. TAPPI Nano. http://www.tappinano.org/media/1114/cellulose-nanomaterials-production-state-of-the-industry-dec-2015.pdf
Missoum K, Belgacem MN, Bras J (2013) Nanofibrillated cellulose surface modification: a review. Materials (Basel) 6:1745–1766. https://doi.org/10.3390/ma6051745
Naimi LJ, Sokhansanj S, Bi X, Lim CJ (2016) Development of a size reduction equation for woody biomass: the influence of branch wood properties on Rittinger’s constant. Trans ASABE 59:1475–1484. https://doi.org/10.13031/trans.59.11347
Nair SS, Yan N (2015) Effect of high residual lignin on the thermal stability of nanofibrils and its enhanced mechanical performance in aqueous environments. Cellulose 22:3137–3150. https://doi.org/10.1007/s10570-015-0737-5
Nechyporchuk O, Belgacem MN, Bras J (2016) Production of cellulose nanofibrils: a review of recent advances. Ind Crops Prod 93:2–25. https://doi.org/10.1016/j.indcrop.2016.02.016
Niimura H, Yokoyama T, Kimura S et al (2010) AFM observation of ultrathin microfibrils in fruit tissues. Cellulose 17:13–18
Novaes E, Kirst M, Chiang V et al (2010) Lignin and biomass: a negative correlation for wood formation and lignin content in trees. Plant Physiol 154:555–561. https://doi.org/10.1104/pp.110.161281
Okahisa Y, Abe K, Nogi M et al (2011) Effects of delignification in the production of plant-based cellulose nanofibers for optically transparent nanocomposites. Compos Sci Technol 71:1342–1347. https://doi.org/10.1016/j.compscitech.2011.05.006
Okahisa Y, Furukawa Y, Ishimoto K et al (2018) Comparison of cellulose nanofiber properties produced from different parts of the oil palm tree. Carbohydr Polym 198:313–319. https://doi.org/10.1016/j.carbpol.2018.06.089
Oksman K, Aitomäki Y, Mathew AP et al (2016) Review of the recent developments in cellulose nanocomposite processing. Compos Part A Appl Sci Manuf 83:2–18. https://doi.org/10.1016/j.compositesa.2015.10.041
Osong SH, Norgren S, Engstrand P (2016) Processing of wood-based microfibrillated cellulose and nanofibrillated cellulose, and applications relating to papermaking: a review. Cellulose 23:93–123. https://doi.org/10.1007/s10570-015-0798-5
Parajuli R, Dalgaard T, Jørgensen U et al (2015) Biorefi ning in the prevailing energy and materials crisis: a review of sustainable pathways for biorefinery value chains and sustainability assessment methodologies. Renew Sustain Energy Rev 43:244–263. https://doi.org/10.1016/j.rser.2014.11.041
Park C-W, Han S-Y, Namgung H-W et al (2017) Preparation and characterization of cellulose nanofibrils with varying chemical compositions. BioResources 12:5031–5044. https://doi.org/10.15376/biores.12.3.5031-5044
Pennells J, Yu Lin T, Schmidt S et al (2018) Effects of the growth environment on the yield and material properties of nanocellulose derived from the Australian desert grass Triodia. Ind Crops Prod 126:238–249. https://doi.org/10.1016/j.indcrop.2018.09.057
Phitsuwan P, Sakka K, Ratanakhanokchai K (2013) Improvement of lignocellulosic biomass in planta: a review of feedstocks, biomass recalcitrance, and strategic manipulation of ideal plants designed for ethanol production and processability. Biomass Bioenerg 58:390–405. https://doi.org/10.1016/j.biombioe.2013.08.027
Postek MT, Vladár A, Dagata J et al (2011) Development of the metrology and imaging of cellulose nanocrystals. Meas Sci Technol. https://doi.org/10.1088/0957-0233/22/2/024005
Prakasham RS, Nagaiah D, Vinutha KS et al (2014) Sorghum biomass: a novel renewable carbon source for industrial bioproducts. Biofuels 5:159–174. https://doi.org/10.4155/bfs.13.74
Puangsin B, Yang Q, Saito T, Isogai A (2013) Comparative characterization of TEMPO-oxidized cellulose nanofibril films prepared from non-wood resources. Int J Biol Macromol 59:208–213. https://doi.org/10.1016/j.ijbiomac.2013.04.016
Rajinipriya M, Nagalakshmaiah M, Robert M, Elkoun S (2018) Importance of agricultural and industrial waste in the field of nanocellulose and recent industrial developments of wood based nanocellulose: a review. ACS Sustain Chem Eng 6:2807–2828. https://doi.org/10.1021/acssuschemeng.7b03437
Rocha I, Ferraz N, Mihranyan A et al (2018) Sulfonated nanocellulose beads as potential immunosorbents. Cellulose 25:1899–1910. https://doi.org/10.1007/s10570-018-1661-2
Rojo E, Peresin MS, Sampson WW et al (2015) Comprehensive elucidation of the effect of residual lignin on the physical, barrier, mechanical and surface properties of nanocellulose films. Green Chem 17:1853–1866. https://doi.org/10.1039/C4GC02398F
Rol F, Belgacem MN, Gandini A, Bras J (2019) Recent advances in surface-modified cellulose nanofibrils. Prog Polym Sci 88:241–264. https://doi.org/10.1016/j.progpolymsci.2018.09.002
Sampaio S, Bishop D, Shen J (2005) Physical and chemical properties of flax fibres from stand-retted crops desiccated at different stages of maturity. Ind Crops Prod 21:275–284. https://doi.org/10.1016/j.indcrop.2004.04.001
Shahid-Ul-Islam, Shahid M, Mohammad F (2013) Perspectives for natural product based agents derived from industrial plants in textile applications—a review. J Clean Prod 57:2–18. https://doi.org/10.1016/j.jclepro.2013.06.004
Sharma R, Kumar V, Kumar R (2019) Distribution of phytoliths in plants: a review. Geol Ecol Landsc 3:123–148. https://doi.org/10.1080/24749508.2018.1522838
Solala I, Vuorinen T, Volperts A et al (2012) Mechanoradical formation and its effects on birch kraft pulp during the preparation of nanofibrillated cellulose with Masuko refining. Holzforschung 66:477–483. https://doi.org/10.1515/hf.2011.183
Tao G, Lestander TA, Geladi P, Xiong S (2012) Biomass properties in association with plant species and assortments I: a synthesis based on literature data of energy properties. Renew Sustain Energy Rev 16:3481–3506. https://doi.org/10.1016/j.rser.2012.02.039
TAPPI (2013) Proposed new TAPPI standard: standard terms and their definition for cellulose nanomaterial
Thakur VK (2014) Nanocellulose polymer nanocomposites: fundamentals and applications. Wiley, New York
Thygesen A, Thomsen AB, Daniel G, Lilholt H (2007) Comparison of composites made from fungal defibrated hemp with composites of traditional hemp yarn. Ind Crops Prod 25:147–159. https://doi.org/10.1016/j.indcrop.2006.08.002
Tsuboi K, Yokota S, Kondo T (2014) Difference between bamboo- and wood-derived cellulose nanofibers prepared by the aqueous counter collision method. Nord Pulp Pap Res J 29:69–76. https://doi.org/10.3183/npprj-2014-29-01-p069-076
Tumuluru JS, Tabil LG, Song Y et al (2014) Grinding energy and physical properties of chopped and hammer-milled barley, wheat, oat, and canola straws. Biomass Bioenerg 60:58–67. https://doi.org/10.1016/j.biombioe.2013.10.011
Turbak AF, Snyder FW, Sandberg KR (1983) Microfibrillated cellulose
Väisänen T, Haapala A, Lappalainen R, Tomppo L (2016) Utilization of agricultural and forest industry waste and residues in natural fiber-polymer composites: a review. Waste Manag 54:62–73. https://doi.org/10.1016/j.wasman.2016.04.037
Vassilev SV, Baxter D, Andersen LK et al (2012) An overview of the organic and inorganic phase composition of biomass. Fuel 94:1–33. https://doi.org/10.1016/j.fuel.2011.09.030
Vogel J (2008) Unique aspects of the grass cell wall. Curr Opin Plant Biol 11:301–307. https://doi.org/10.1016/j.pbi.2008.03.002
Voloshin RA, Rodionova MV, Zharmukhamedov SK et al (2016) Review: biofuel production from plant and algal biomass. Int J Hydrog Energy 41:17257–17273. https://doi.org/10.1016/j.ijhydene.2016.07.084
Wang Y, Wei X, Li J et al (2015) Study on nanocellulose by high pressure homogenization in homogeneous isolation. Fibers Polym 16:572–578. https://doi.org/10.1007/s12221-015-0572-1
Wang Z, Pan R, Sun R et al (2018) Nanocellulose structured paper-based lithium metal batteries. ACS Appl Energy Mater 1:4341–4350. https://doi.org/10.1021/acsaem.8b00961
Watanabe Y, Schneider R, Barkwill S et al (2018) Cellulose synthase complexes display distinct dynamic behaviors during xylem transdifferentiation. Proc Natl Acad Sci 115:E6366–E6374. https://doi.org/10.1073/pnas.1802113115
Williams CL, Westover TL, Emerson RM et al (2016) Sources of biomass feedstock variability and the potential impact on biofuels production. Bioenergy Res 9:1–14. https://doi.org/10.1007/s12155-015-9694-y
Xu C, Carlsson DO, Mihranyan A (2016) Feasibility of using DNA-immobilized nanocellulose-based immunoadsorbent for systemic lupus erythematosus plasmapheresis. Colloids Surf B Biointerfaces 143:1–6. https://doi.org/10.1016/j.colsurfb.2016.03.014
Xu C, Kong X, Zhou S et al (2018) Interweaving metal-organic framework-templated Co-Ni layered double hydroxide nanocages with nanocellulose and carbon nanotubes to make flexible and foldable electrodes for energy storage devices. J Mater Chem A 6:24050–24057. https://doi.org/10.1039/c8ta10133g
Yahya M, Chen YW, Lee HV, Hassan WHW (2018) Reuse of selected lignocellulosic and processed biomasses as sustainable sources for the fabrication of nanocellulose via Ni(II)-catalyzed hydrolysis approach: a comparative study. J Polym Environ 26:2825–2844. https://doi.org/10.1007/s10924-017-1167-2
Yu Y, Wang H, Lu F et al (2014) Bamboo fibers for composite applications: a mechanical and morphological investigation. J Mater Sci 49:2559–2566. https://doi.org/10.1007/s10853-013-7951-z
Yue D, Qian X (2018) Isolation and rheological characterization of cellulose nanofibrils (CNFs) from coir fibers in comparison to wood and cotton. Polymers 10(3):320
Ziemińska K, Butler DW, Gleason SM et al (2013) Fibre wall and lumen fractions drive wood density variation across 24 Australian angiosperms. AoB Plants 5:1–14. https://doi.org/10.1093/aobpla/plt046
Zimmermann T, Pöhler E, Geiger T (2004) Cellulose fibrils for polymer reinforcement. Adv Eng Mater 6:754–761. https://doi.org/10.1002/adem.200400097
Acknowlegemets
Funding was provided by Grains Research and Development Corporation (Grant No. 9176987).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Pennells, J., Godwin, I.D., Amiralian, N. et al. Trends in the production of cellulose nanofibers from non-wood sources. Cellulose 27, 575–593 (2020). https://doi.org/10.1007/s10570-019-02828-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10570-019-02828-9