Polysaccharide-based systems have very good emulsifying and stabilizing properties, and starch plays a leading role. Their modifications should add new quality features to the product to such an extent that preserves the structure-forming properties of native starch. The aim of this manuscript was to examine the physicochemical characteristics of the combinations of starch with phospholipids or lysozymes and determine the effect of starch modification (surface hydrophobization or biological additives) and preparation temperature (before and after gelatinization). Changes in electrokinetic potential (zeta), effective diameter, and size distribution as a function of time were analyzed using the dynamic light scattering and microelectrophoresis techniques. The wettability of starch-coated glass plates before and after modification was checked by the advancing and receding contact angle measurements, as well as the angle hysteresis, using the settle drop method as a complement to profilometry and FTIR. It can be generalized that starch dispersions are more stable than analogous n-alkane/starch emulsions at room and physiological temperatures. On the other hand, the contact angle hysteresis values usually decrease with temperature increase, pointing to a more homogeneous surface, and the hydrophobization effect decreases vs. the thickness of the substrate. Surface hydrophobization of starch carried out using an n-alkane film does not change its bulk properties and leads to improvement of its mechanical and functional properties. The obtained specific starch-based hybrid systems, characterized in detail by switchable wettability, give the possibility to determine the energetic state of the starch surface and understand the strength and specificity of interactions with substances of different polarities in biological processes and their applicability for multidirectional use. Full article

Modelling the volatility of commodity prices and creating more reliable models for estimating and forecasting commodity price returns are crucial. The body of research on statistical models that can fully reflect the empirical characteristics of commodity price returns is lacking. The main aim of this research was to develop a modelling framework that could be used to accurately estimate and forecast commodity price returns by combining long memory models with heavy-tailed distributions. This study employed dual hybrid long-memory generalised autoregressive conditionally heteroscedasticity (GARCH) models with heavy-tailed innovations, namely, the Student-t distribution (StD), skewed-Student-t distribution (SStD), and the generalised error distribution (GED). Based on the smallest forecasting metrics values for mean absolute error (MAE) and mean squared error (MSE) values, the best performing LM-GARCH-type model for lithium is the ARFIMA (1, $\mathcal{o}$, 1)-FIAPARCH (1, $\xi$, 1) with normal innovations. For tobacco, the best model is ARFIMA (1, $\mathcal{o}$, 1)-FIGARCH (1, $\xi$, 1) with SStD innovations. The robust performing model for gold is the ARFIMA (1, $\mathcal{o}$, 1)-FIGARCH (1, $\xi$, 1)-GED model. The best performing forecasting model for crude oil and cotton returns are the $FIAPARCH \left(1,\xi , 1\right)-SStD$ model and $HYGARCH \left(1,\xi , 1\right)-StD$ model, respectively. The results obtained from this study would be beneficial to those concerned with financial market modelling techniques, such as derivative pricing, risk management, asset allocation, and valuation. Full article

Multimetric indices play a pivotal role in assessing river ecological quality, aligning with the European Water Framework Directive (EU WFD) requirements. However, indices developed specifically for large rivers are uncommon. Our objective was to develop a fish-based tool specifically tailored to assess the ecological quality in Portuguese large rivers. Data were collected from seven sites in each of three Portuguese large rivers (Minho, Guadiana, and Tagus). Each site was classified using an environmental disturbance score, combining different pressure types, such as water chemistry, land use, and hydromorphological alterations. The Fish-based Multimetric Index for Portuguese Large Rivers (F-MMIP-LR) comprises four metrics: % native lithophilic individuals; % alien individuals; % migrant individuals; and % freshwater native individuals, representing compositional, reproductive, and migratory guilds. The index showed good performance in separating least- and most-disturbed sites. Least-disturbed sites were rated ‘high’ or ‘good’ by F-MMIP-LR, contrasting with no such classification for most-disturbed sites, highlighting index robustness. The three rivers presented a wide range of F-MMIP-LR values across the gradient of ‘bad’ to ‘high’, indicating that, on a large spatial extent, the biological condition was substantially altered. The F-MMIP-LR provides vital information for managers and decision-makers, guiding restoration efforts and strengthening conservation initiatives in line with the WFD. Full article

This study, conducted in the Republic of North Ossetia-Alania (RNOA), aimed to explore the genetic landscape of hyperphenylalaninemia (HPA) and phenylketonuria (PKU) in the Ossetian population using data from newborn screening (NBS). Through comprehensive molecular genetic analysis of 29 patients with HPA from diverse ethnic backgrounds, two major genetic variants in the PAH gene, P281L and P211T, were identified, constituting 50% of all detected pathogenic alleles in Ossetian patients. Remarkably, these variants exhibited an exceptionally high frequency in the Ossetian population, surpassing global prevalence rates. This study unveiled a notable prevalence of mild forms of HPA (78%), underscoring the importance of genetic counseling for carriers of pathogenic variants in the PAH gene. Moreover, the findings emphasized the necessity for ongoing monitoring of patients with mild forms, as they may lack significant symptoms for diagnosis, potentially impacting offspring. Overall, this research offers valuable insights into the genetic landscape of HPA and PKU in the Ossetian population. Full article

In recent years, with the development of building technology, the Chinese construction industry has begun to gradually promote the prefabricated buildings to save on construction costs. Among them, composite slabs, as essential components of prefabricated buildings, have been widely used by designers mainly in favor of their low cost. However, is it possible to further reduce the cost without affecting the quality? Researchers think so if the operation cycle of support from the bottom of composite slabs can accelerate and the mechanical properties of their bottom plate can be optimized. To prove this hypothesis, researchers proposed a new type of prestressed concrete composite slab with removable rectangular steel-tube lattice girders (referred to as CDB composite slabs), whose bottom plate consists of a temporary structure composed of a prestressed concrete prefabricated plate and removable rectangular steel-tube lattice girders. Through static bending performance tests on three prefabricated bottom plates and one composite slab, researchers measured corresponding load-displacement curves, load-strain curves, crack development, and distribution, etc. The test results show that the top chord rectangular steel tubes connected to the bottom plate concrete through web reinforcement bars significantly improve the rigidity, crack resistance, and load-bearing capacity of the bottom plate and possess better ductility and out-of-plane stability. The number of supports at the bottom of the bottom plate is effectively reduced, with the maximum unsupported span reaching 4.8 m. Beyond 4.8 m, only one additional support is needed, and the maximum support span can be up to 9.0 m, which provides space for cost reduction. The cooperative load-bearing performance of the prefabricated bottom plate and the post-cast composite layer concrete is good. The top chord rectangular steel tubes are easy to dismantle and can be reused, which reduces the steel consumption by about 24% compared to that used for the same size of ordinary steel-tube lattice-girder concrete composite slabs. It can greatly decrease the cost. In conclusion, the results have shown that the new method researchers proposed here is practically applicable and also provides great space to save on financial costs. Full article

The mining industry is the leading supplier of raw materials in modern society. This sector of human activity has experienced a severe crisis due to the energy transition and has been revived in recent years due to the need for critical metals that are essential in the post-coal era. In underground and open pit mining, processes such as extraction, transportation, safety, underground ventilation, waste management, and rehabilitation are of major importance, and their “design” is critical to the economic survival of the mine. All the above processes required to operate a mine are strongly reminiscent of an example of nature’s workman: the ant. The sympatric insect uses the same processes as the ones aforementioned during the creation of its nest. The ants dig to “extract material from the ground”, and they transport this material from the nest‘s site to the waste deposition location. The ants ensure the safety of the underground opening and the proper ventilation needed for them to live there for a long time. This article attempts to identify the relations between all the above processes and sub-processes, and how human mining and ant colony development correlate with each other. Furthermore, we examine how an ant colony has aided in the development of mining technology, and what more humans can learn and adopt from a “miner” that is 66 million years old, in order to improve their processes. Full article

A labor companion of choice during childbirth is crucial for improving women’s birth experience and confidence to give birth. Labor companions provide various benefits, including enhanced communication, emotional support, non-pharmacological pain relief, and better healthcare. However, little is known about the supportive actions of labor companions with respect to women’s needs during labor and birth, as well as healthcare providers’ perceptions of labor companions. Therefore, this study was conducted to explore the perceptions of healthcare providers and women regarding labor companions. The study utilized an interpretative phenomenology research design. Data collection involved conducting semi-structured interviews with 14 participants. The sample consisted of mothers, physicians, and nurses, ensuring a diverse range of perspectives. An interpretative phenomenological analysis was conducted for data analysis. Five themes were identified: (a) impact of companionship, (b) benefits for healthcare providers, (c) companion roles, (d) loneliness and alienation of mothers, and (e) challenges of implementation. The findings indicated that the presence of a companion reduces the need for unnecessary medical interventions and eases the workload of healthcare providers. Without a companion, mothers often feel lonely and disconnected during the birthing process. The presence of companions is often hindered by space limitations in delivery rooms, the absence of clear policies, and lack of childbirth education programs for companions. Clear policies, education programs, and adequate space are essential for implementing and promoting labor companionship during childbirth. Full article

Orb-weaver spiders produce upwards of seven different types of silk, each with unique material properties. We focus on the adhesive within orb-weaving spider webs, aggregate glue silk. These droplets are composed of three main components: water, glycoproteins, and a wide range of low molecular mass compounds (LMMCs). These LMMCs are known to play a crucial role in maintaining the material properties of the glycoproteins, aid in water absorption from the environment, and increase surface adhesion. Orb-weavers within the Cyrtarachninae subfamily are moth specialists and have evolved glue droplets with novel material properties. This study investigated the biochemical composition and diversity of the LMMCs present in the aggregate glue of eight moth-specialist species and compared them with five generalist orb-weavers using nuclear magnetic resonance (NMR) spectroscopy. We hypothesized that the novel drying ability of moth-specialist glue was accompanied by novel LMMCs and lower overall percentages by silk weight of LMMCs. We measured no difference in LMMC weight by the type of prey specialization, but observed novel compositions in the glue of all eight moth-catching species. Further, we quantified the presence of a previously reported but unidentified compound that appears in the glue of all moth specialists. These silks can provide insight into the functions of bioadhesives and inform our own synthetic adhesives. Full article

Objective and objectives: Patients with cognitive disorders such as Alzheimer’s disease (AD) and mild cognitive impairment (MCI) frequently exhibit depressive symptoms. Depressive symptoms can be evaluated with various measures and questionnaires. The geriatric depression scale (GDS) is a scale that can be used to measure symptoms in geriatric age. Many questionnaires sum up symptom scales. However, core symptoms of depression in these patients and connections between these symptoms have not been fully explored yet. Thus, the objectives of this study were (1) to determine core symptoms of two cognitive disorders, Alzheimer’s disease and mild cognitive impairment, and (2) to investigate the network structure of depressive symptomatology in individuals with cognitive impairment in comparison with those with Alzheimer’s disease. Materials and Methods: This study encompassed 5354 patients with cognitive impairments such as Alzheimer’s disease (n = 1889) and mild cognitive impairment (n = 3464). The geriatric depression scale, a self-administered questionnaire, was employed to assess depressive symptomatology. Using exploratory graph analysis (EGA), a network analysis was conducted, and the network structure was evaluated through regularized partial correlation models. To determine the centrality of depressive symptoms within each cohort, network parameters such as strength, betweenness, and closeness were examined. Additionally, to explore differences in the network structure between Alzheimer’s disease and mild cognitive impairment groups, a network comparison test was performed. Results: In the analysis of centrality indices, “worthlessness” was identified as the most central symptom in the geriatric depression scale among patients with Alzheimer’s disease, whereas “emptiness” was found to be the most central symptom in patients with mild cognitive impairment. Despite these differences in central symptoms, the comparative analysis showed no statistical difference in the overall network structure between Alzheimer’s disease and mild cognitive impairment groups. Conclusions: Findings of this study could contribute to a better understanding of the manifestation of depressive symptoms in patients with cognitive impairment. These results are expected to aid in identifying and prioritizing core symptoms in these patients. Further research should be conducted to explore potential interventions tailored to these core symptoms in patients with Alzheimer’s disease and mild cognitive impairment. Establishing core symptoms in those groups might have clinical importance in that appropriate treatment for neuropsychiatric symptoms in patients with cognitive impairment could help preclude progression to further impairment. Full article

The use of whole-cell biocatalysts in microbial cell factories is of great interest to produce added-value compounds. Through large-scale fermentative processes, which use secondary raw materials as substrates, it is possible to recycle and upgrade agro-industrial by-products. This review addresses the main fermentative processes and bioreactors currently used for the valorization of orange peel, a by-product of the Citrus processing industry. Among the main added-value products, bioethanol, organic acids, enzymes, single cell proteins (SCPs), dyes and aromatic compounds have been industrially produced using orange peel via solid state fermentation and submerged fermentation. This approach fits within the circular economy goals in terms of clean technology and renewable energy, valorization and recycling, upgrade of industrial by-products and sustainability. Full article

Cadmium ion (Cd²⁺) stress is a major abiotic stressor affecting plant photosynthesis. However, the impact of sustained high-concentration Cd stress on the photosynthetic electron transport chain of aquatic plants is currently unclear. Here, prompt fluorescence (PF), delayed fluorescence (DF), and P700 signals were simultaneously measured to investigate the effect of Cd stress on photosynthesis in water dropwort [Oenanthe javanica (Blume) DC.]. We aimed to elucidate how Cd stress continuously affects the electron transport chain in this species. The PF analysis showed that with prolonged Cd stress, the F_J, F_I and F_P steadily decreased, accompanied by a positive shift in the K-band and L-band. Moreover, JIP-test parameters, including TR_O/ABS, ABS/CS_O, TR_O/CS_O and PI_ABS, were significantly reduced. The P700 signals showed that exposure to Cd stress hindered both the fast decrease and slow increase phases of the MR transient, ultimately resulting in a gradual reduction in both V_PSI and V_{PSII − PSI}. The DF analysis showed a gradual decrease in the I₁ and I₂ values as the duration of stress from Cd increased. The above results suggested that Cd stress affected the photosynthetic electron transport in water dropwort by influencing the amount of active PSII and PSI, primarily affecting PSII RCs in the early to mid-stages and PSI reductive activity in the later stage. Full article

A high consumption of solid fats is linked to increased inflammation and a risk of cardiovascular diseases. Hence, in recent years, there has been increasing interest in the development of oleogels as a fat substitute in food products. Oleogels are edible gels that contain a large amount of liquid oils entrapped in a 3D network and that can potentially be applied to spreads, bakery goods, meat, and dairy products in order to lower their saturated fat content while maintaining a desirable food texture and mouthfeel. In this work, alginate cryogels were studied as templates for three different edible oils in the process of oleogel formation. Two different freezing regimes to obtain cryogels were employed in order to evaluate better the textural and morphological capabilities of cryogels to adsorb and retain edible oils. It was shown that rapid freezing in liquid nitrogen produces alginate cryogels with a lower density, higher porosity, and a greater ability to adsorb the tested oils. The highest uptake and holding oil capacity was achieved for olive oil, which reached a value of 792%,and 82%, respectively. The best chewiness was found for an oleogel containing olive oil, whereas oleogels with the other two tested oils showed better springiness. Hence, the results presented in this work demonstrated that alginate-based cryogels can be effectively used as templates for oleogels and potentially find applications in the food industry. Full article

An appropriate drying method is crucial for producing high-quality dried apricots. In this study, the effects of four drying methods, hot air drying (HAD), infrared drying (IRD), pulse vacuum drying (PVD), and vacuum freeze-drying (VFD), on the drying kinetics and physical and nutritional characteristics of apricot slices were evaluated. PVD required the shortest time (16.25 h), followed by IRD (17.54 h), HAD (21.39 h), and VFD (34.64 h). VFD resulted in the best quality of apricot slices, with the smallest color difference (ΔE = 13.64), lowest water activity (0.312 ± 0.015) and browning degree (0.35), highest color saturation (62.84), lowest hardness (8.35 ± 0.47 N) and shrinkage (9.13 ± 0.65%), strongest rehydration ability (3.58 ± 0.11 g/g), a good microstructure, and high nutrient-retention rates (ascorbic acid content: 53.31 ± 0.58 mg/100 g, total phenolic content: 12.64 ± 0.50 mg GAE/g, and carotenoid content: 24.23 ± 0.58 mg/100 g) and antioxidant activity (DPPH: 21.10 ± 0.99 mmol Trolox/g and FRAP: 34.10 ± 0.81 mmol Trolox/g). The quality of PVD-treated apricot slices was second-best, and the quality of HAD-treated apricot slices was the worst. However, the energy consumption required for VFD was relatively high, while that required for PVD was lower. The results of this study provide a scientific basis for the large-scale industrial production of dried apricots. Full article

3-Methylthio-1-propanol (3-Met) is an important flavor compound in various alcoholic beverages such as Baijiu and Huangjiu. To maintain the content of 3-Met in these alcoholic beverages, it is necessary to screen a micro-organism with high yield of 3-Met from the brewing environment. In this study, the ability of yeast strains from the Baijiu brewing to produce 3-Met was analyzed, aiming to obtain yeast with high-yield 3-Met, and its fermentation conditions were optimized. Firstly, 39 yeast strains were screened using 3-Met conversion medium. The results showed that the majority of the strains from Baijiu brewing sources could produce 3-Met, and nearly half of the strains produced more than 0.5 g/L of 3-Met. Among these, yeast F10404, Y03401, and Y8#01, produced more than 1.0 g/L of 3-Met, with yeast Y03401 producing the highest amount at 1.30 g/L. Through morphological observation, physiological and biochemical analysis, and molecular biological identification, it was confirmed that yeast Y03401 was a Saccharomyces cerevisiae. Subsequently, the optimal fermentation conditions for 3-Met production by this yeast were obtained through single-factor designs, Plackett–Burman test, steepest ascent path design and response surface methodology. When the glucose concentration was 60 g/L, yeast extract concentration was 0.8 g/L, L-methionine concentration was 3.8 g/L, initial pH was 4, incubation time was 63 h, inoculum size was 1.6%, shaking speed was 150 rpm, loading volume was 50 mL/250 mL, and temperature was 26 °C, the content of 3-Met produced by S. cerevisiae Y03401 reached a high level of 3.66 g/L. It was also noteworthy that, in contrast to other study findings, this yeast was able to create substantial amounts of 3-Met even in the absence of L-methionine precursor. Based on the clear genome of S. cerevisiae and its characteristics in 3-Met production, S. cerevisiae Y03401 had broad prospects for application in alcoholic beverages such as Baijiu. Full article

The valorization of greenhouse gases, especially when focused on carbon dioxide, currently belongs to the main challenges of pro-environmental chemical processes. One of the important technologies in this field is dry methane reforming (DMR), leading to the so-called synthesis gas (CO + H₂). However, to be efficient and economically viable, an active and stable catalyst is required. Ni-based systems can be recommended in this regard. This research aimed to investigate how nickel content can influence the activity of model NiO_x/CeO₂ catalysts in DMR. A series of NiO_x/CeO₂ samples of various nickel loadings (0–10 wt.%) were prepared through dry impregnation. The obtained samples were characterized through XRD, RS, N₂-BET, DRIFT, SEM, UV/Vis-DR, and XPS. Nonlinear changes in surface properties of the investigated samples with increasing nickel concentration were found. The observed changes are mirrored both in the determined nickel speciation and in the corresponding catalytic activity. The highest activity was found for the catalyst containing 3 wt.%. of nickel. Full article

Achilles tendon (AT) pathologies are common musculoskeletal conditions that can significantly impair function. Despite various traditional treatments, recovery is often slow and may not restore full functionality. The use of extracellular vesicles (EVs) has emerged as a promising therapeutic option due to their role in cell signaling and tissue regeneration. This systematic review aims to consolidate current in vivo animal study findings on the therapeutic effects of EVs on AT injuries. An extensive literature search was conducted using the PubMed, Scopus, and Embase databases for in vivo animal studies examining the effects of EVs on AT pathologies. The extracted variables included but were not limited to the study design, type of EVs used, administration methods, efficacy of treatment, and proposed therapeutic mechanisms. After screening, 18 studies comprising 800 subjects were included. All but one study reported that EVs augmented wound healing processes in the AT. The most proposed mechanisms through which this occurred were gene regulation of the extracellular matrix (ECM), the enhancement of macrophage polarization, and the delivery of therapeutic microRNAs to the injury site. Further research is warranted to not only explore the therapeutic potential of EVs in the context of AT pathologies, but also to establish protocols for their clinical application. Full article

Infants presenting with unexpected pneumoperitoneum upon abdominal X-ray, indicating a gastrointestinal perforation (GIP), have a surgical emergency with potential morbidity and mortality. Preoperative determination of the location of perforation is challenging but will aid the surgeon in optimizing the surgical strategy, as colon perforations are more challenging than small bowel perforations. Therefore, the aim of this study is to provide an overview of preoperative patient characteristics, determine the differences between the small bowel and colon, and determine underlying causes in a cohort of infants with unexpected GIP. Methods: All infants (age ≤ 6 months) who presented at our center with unexpected pneumoperitoneum (no signs of pneumatosis before) undergoing surgery between 1996 and 2024 were retrospectively included. The differences between the location of perforation were analyzed using chi-squared and t-tests. Bonferroni correction was used to adjust for multiple tests. Results: In total, 51 infants presented with unexpected pneumoperitoneum at our center, predominantly male (N = 36/51) and premature (N = 40/51). Among them, twenty-six had small bowel, twenty-two colon, and three stomach perforations. Prematurity (p = 0.001), birthweight < 1000 g (p = 0.001), respiratory support (p = 0.001), and lower median arterial pH levels (p = 0.001) were more present in patients with small bowel perforation compared with colon perforations. Pneumatosis intestinalis was more present in patients with colon perforation (p = 0.004). All patients with Hirschsprung disease and cystic fibrosis had colon perforation. The final diagnoses were mainly focal intestinal perforations (N = 27/51) and necrotizing enterocolitis (N = 9/51). Conclusion: Infants with unexpected GIP, birthweight <1000 g, and prematurity have more risk for small bowel perforation. In case of colon perforation, additional screening (for Hirschsprung and cystic fibrosis) should be considered. Full article

Dementia poses a substantial global health challenge, warranting an exploration of its intricate pathophysiological mechanisms and potential intervention targets. Leveraging multi-omic technology, this study utilizes data from 2251 participants to construct classification models using lipidomic, gut metabolomic, and cerebrospinal fluid (CSF) proteomic markers to distinguish between the states of cognitive decline, namely, the cognitively unimpaired state, mild cognitive impairment, and dementia. The analysis identifies three CSF proteins (apolipoprotein E, neuronal pentraxin-2, and fatty-acid-binding protein), four lipids (DEDE.18.2, DEDE.20.4, LPC.O.20.1, and LPC.P.18.1), and five serum gut metabolites (Hyodeoxycholic acid, Glycohyodeoxycholic acid, Hippuric acid, Glyceric acid, and Glycodeoxycholic acid) capable of predicting dementia prevalence from cognitively unimpaired participants, achieving Area Under the Curve (AUC) values of 0.879 (95% CI: 0.802–0.956), 0.766 (95% CI: 0.700–0.835), and 0.717 (95% CI: 0.657–0.777), respectively. Furthermore, exclusively three CSF proteins exhibit the potential to predict mild cognitive impairment prevalence from cognitively unimpaired subjects, with an AUC of 0.760 (95% CI: 0.691–0.828). In conclusion, we present novel combinations of lipids, gut metabolites, and CSF proteins that showed discriminative abilities between the states of cognitive decline and underscore the potential of these molecules in elucidating the mechanisms of cognitive decline. Full article

Currently, various light-emitting diode (LED) lighting systems are being developed because LEDs are one of the most used lighting sources for work environments, buildings, homes, and public roads in terms of some of their applications. Similarly, they have low energy consumption, quick responses, and excellent optimal performance in their operation. However, these systems still need to precisely regulate lighting, maintain stable voltage and current in the presence of faults and disturbances, and have a wide range of operations in the event of trajectory changes or monitoring tasks regarding the desired voltage and current. This work presents the design and application of two types of robust controllers (structure-at-infinity control and geometric control) applied to an LED driver using a buck converter. The controllers aim to follow the desired trajectories, attenuate disturbances at the power supply input, and compensate for faults in the actuator (MOSFET) to keep the capacitor voltage and inductor current stable. When comparing the results obtained with the two controllers, it was observed that both present excellent performance in the presence of constant disturbances. However, in scenarios in which variable faults and path changes are implemented, the structure-at-infinity control method shows an overimpulse of output voltage and current ranging from 39 to 42 volts and from 0.3 to 0.45 A, with a margin of error of 1%, and it can generate a failure in the LED driver using a buck converter. On the other hand, when using geometric control, the results are satisfactory, achieving attenuating constant disturbances and variable faults, reaching the desired voltage (40 v to 35 v) and current (0.3 to 0.25 A) with a margin of error of 0.05%, guaranteeing a system without overvoltages or the accelerated degradation of the components due to magnetic conductivity. Full article

The conventional approach of the local convergence analysis of an iterative method on ${\mathbb{R}}^m$, with m a natural number, depends on Taylor series expansion. This technique often requires the calculation of high-order derivatives. However, those derivatives may not be part of the proposed method(s). In this way, the method(s) can face several limitations, particularly the use of higher-order derivatives and a lack of information about a priori computable error bounds on the solution distance or uniqueness. In this paper, we address these drawbacks by conducting the local convergence analysis within the broader framework of a Banach space. We have selected an important family of high convergence order methods to demonstrate our technique as an example. However, due to its generality, our technique can be used on any other iterative method using inverses of linear operators along the same line. Our analysis not only extends in ${\mathbb{R}}^m$ spaces but also provides convergence conditions based on the operators used in the method, which offer the applicability of the method in a broader area. Additionally, we introduce a novel semilocal convergence analysis not presented before in such studies. Both forms of convergence analysis depend on the concept of generalized continuity and provide a deeper understanding of convergence properties. Our methodology not only enhances the applicability of the suggested method(s) but also provides suitability for applied science problems. The computational results also support the theoretical aspects. Full article

Parkinson’s disease (PD) is a debilitating neurodegenerative disease with a relentlessly progressive course of illness. This study aimed to assess the dyadic dynamics of benefit finding (BF), demoralization, and stigma on the depression severity of PD patients and their caregivers. This study used a cross-sectional design with purposive sampling. In total, 120 PD patients and 120 caregivers were recruited from the neurological ward or neurological outpatient clinic of a medical center in Taiwan from October 2021 to September 2022. PD patients and their caregivers were enrolled and assessed using the Mini International Neuropsychiatric Interview, the Benefit Finding scale, Demoralization Scale, Stigma Subscale of the Explanatory Model Interview Catalogue, and Taiwanese Depression Questionnaire. Among the 120 patients and 120 caregivers that successfully completed the study, 41.7% (N = 50) and 60% (N = 72) were female, respectively. The most common psychiatric diagnoses of both the PD patients (17.5%) and their caregivers (13.3%) were depressive disorders. Using structural equation modeling, we found that the stigma, BF, and demoralization of PD patients might contribute to their depression severity. Demoralization and stigma of PD patients’ caregivers might also contribute to the depression severity of PD patients. Caregivers’ BF and demoralization were significantly linked with their depression severity. PD patients’ BF degree and their caregivers’ BF degree had significant interactive effects. Both patients’ and their caregivers’ stigma levels had significant interactive effects. Clinicians should be aware of and manage these contributing factors between PD patients and their caregivers in order to prevent them from exacerbating each other’s depression. Full article

Aircraft propellers produce relatively large in-plane loads, called propeller 1P loads, during maneuvers such as turning, diving, and lifting, and these loads can negatively affect the flight and control of the aircraft. In order to study the change rule of 1P aerodynamic loads, in this paper, a mathematical model of the propeller 1P aerodynamic loads has been developed based on the blade element momentum theory. This mathematical model was then corrected using the Pitt–Peters incoming flow correction method, the Prandtl tip correction method, and the propeller root flow correction method. Based on this mathematical model, a calculation procedure for the propeller 1P aerodynamic loads was developed using MATLAB software, and the accuracy of the procedure was verified by comparing the results with CFD simulation results. Numerical simulations show that the results calculated based on the proposed mathematical model for the coefficients of thrust, power, bending moment, and the tangential force of the propeller have an error of less than ±6.00% compared to the CFD simulation results. For a small inflow angle, the coefficients of bending moment and tangential force of the whole propeller fluctuate in a small range. But, as the inflow angle increases, the fluctuation range of the aerodynamic characteristic parameters of the propeller increases and the fluctuation becomes more complicated. Through numerical calculations, it has been shown that the mathematical model presented herein is reliable and accurate. In addition, it greatly shortens the calculation time and improves the calculation efficiency. It is expected that the proposed model can provide a certain help for the strength design of the propeller structure and the study of the aerodynamic performance of the whole aircraft. Full article