This paper comprehensively reviews sensors and sensing devices developed or/and proposed so far utilizing two smart materials: electrorheological fluids (ERFs) and magnetorheological materials (MRMs) whose rheological characteristics such as stiffness and damping can be controlled by external stimuli; an electrical voltage for ERFs and a magnetic field for MRMs, respectively. In this review article, the MRMs are classified into magnetorheological fluids (MRF), magnetorheological elastomers (MRE) and magnetorheological plastomers (MRP). To easily understand the history of sensing research using these two smart materials, the order of this review article is organized in a chronological manner of ERF sensors, MRF sensors, MRE sensors and MRP sensors. Among many sensors fabricated from each smart material, one or two sensors or sensing devices are adopted to discuss the sensing configuration, working principle and specifications such as accuracy and sensitivity. Some sensors adopted in this article include force sensors, tactile devices, strain sensors, wearable bending sensors, magnetometers, display devices and flux measurement sensors. After briefly describing what has been reviewed in a conclusion, several challenging future works, which should be undertaken for the practical applications of sensors or/and sensing devices, are discussed in terms of response time and new technologies integrating with artificial intelligence neural networks in which several parameters affecting the sensor signals can be precisely and optimally tuned. It is sure that this review article is very helpful to potential readers who are interested in creative sensors using not only the proposed smart materials but also different types of smart materials such as shape memory alloys and active polymers. Full article

An amplitude modulator plays an essential role in the implementation of continuous-variable quantum key distribution (CVQKD), whereas it may bring about a potential security loophole in the practical system. The high-frequency modulation of the actual transmitter usually results in the high rate of the system. However, an imperfect amplitude modulator (AM) can give birth to a potential information leakage from the modulation of the transmitter. To reveal a potential security loophole from the high-frequency AM embedded in the transmitter, we demonstrate an influence on the practical security of the system in terms of the secret key rate and maximal transmission distance. The results indicate the risk of this security loophole in the imperfect AM-embedded transmitter. Fortunately, the legal participants can trace back the potential information leakage that has been produced from the imperfect transmitter at high frequencies, which can be used for defeating the leakage attack in CVQKD. We find the limitations of the imperfect AM-embedded transmitter of the high-frequency quantum system, and hence, we have to trade off the practical security and the modulation frequency of the AM-embedded transmitter while considering its implementation in a practical environment. Full article

This study begins by conducting side milling experiments on SKD11 using tungsten carbide TiAlN-coated end mills to compare the surface roughness performance between two combinations of milling process parameters (feed rate and radial depth of cut), along with three ultrasonic-assisted methods (rotary, dual-axis, and rotary combined with dual-axis). The results suggest that the rotary (z-axis oscillation) ultrasonic-assisted method may provide better performance. Subsequently, this superior ultrasonic-assisted method was applied both with and without laser locally preheating assistance, respectively. Using a Taguchi orthogonal array, milling process parameters (spindle speed, feed rate, and radial depth of cut) were planned for experiments with the same cutting tool and the workpiece just mentioned above. The surface roughness serves as the objective function while being constrained by cutting-tool life. The characteristics of the smaller-the-better in the Taguchi method were applied to determine the optimal combination of process parameters. Based on the optimal milling process parameters obtained and the superior hybrid-assisted method adopted, milling experiments were repeatedly performed to collect the data on cutting force and cutting-tool wear. Feature engineering was performed on the cutting force signals, and different domain characteristics from both the time and frequency domains were extracted. Hereafter, feature selection by random forest and data standardization were further applied to feature extractions, and the data processing was thus completed. For the processed data, a cutting-tool wear prediction model was constructed by ensemble learning. This method leverages various machine learning regression models, including decision tree, random forest, extremely randomized tree, light gradient boosting machine, extreme gradient boosting, AdaBoost, stochastic gradient descent, support vector regression, linear support vector regression, and multilayer perceptron. After hyper-parameter tuning, the ensemble voting regression prediction was performed based on these ten mentioned models. The experimental results demonstrate that the ensemble voting regression model surpasses the performance of each individual machine learning regression model. In addition, this regression model achieves a coefficient of determination (R²) of 0.94576, a root mean square error (RMSE) of 0.24348, a mean squared error (MSE) of 0.05928, and a mean absolute error (MAE) of 0.18182. Therefore, the ensemble learning approach has been proven to be a feasible and effective method for monitoring cutting-tool wear. Full article

The development of efficient catalysts with longevity to remove chlorobenzene is challenging due to Cl poisoning. Herein, a series of Mn-Cr/ZrO_x catalysts supported by Zr-based metal-organic framework (UiO-66)-derived ZrO_x was prepared and investigated for chlorobenzene (CB) catalytic oxidation. MnCr/ZrO_x-M prepared via a wet impregnation method presented an amorphous structure, indicating the homogeneous dispersion of Cr and Mn, which improved acid and redox properties. 40Mn7Cr3/ZrO_x-M exhibited the best catalytic activity for chlorobenzene oxidation with T₉₀ of 293 ℃, which is mainly due to the strong interaction between manganese and chromium promoted by the large specific surface area of the ZrO_x support. Furthermore, 40Mn7Cr3/ZrO_x-M presented excellent stability for chlorobenzene oxidation. Full article

In quasispecies diversity studies, the comparison of two samples of varying sizes is a common necessity. However, the sensitivity of certain diversity indices to sample size variations poses a challenge. To address this issue, rarefaction emerges as a crucial tool, serving to normalize and create fairly comparable samples. This study emphasizes the imperative nature of sample size normalization in quasispecies diversity studies using next-generation sequencing (NGS) data. We present a thorough examination of resampling schemes using various simple hypothetical cases of quasispecies showing different quasispecies structures in the sense of haplotype genomic composition, offering a comprehensive understanding of their implications in general cases. Despite the big numbers implied in this sort of study, often involving coverages exceeding 100,000 reads per sample and amplicon, the rarefaction process for normalization should be performed with repeated resampling without replacement, especially when rare haplotypes constitute a significant fraction of interest. However, it is noteworthy that different diversity indices exhibit distinct sensitivities to sample size. Consequently, some diversity indicators may be compared directly without normalization, or instead may be resampled safely with replacement. Full article

A properly functioning peritoneal catheter is an essential element of effective peritoneal dialysis (PD). Currently, there are three techniques available for PD catheter placement, which include open surgery, laparoscopic surgery, and percutaneous catheter placement (PCP). Currently, no particular catheter placement approach has been proven with certainty to provide superior outcomes. We present a new modified PCP method with the use of the Veress needle covered with an intravascular catheter (IC) and preliminary clinical results of PD catheter placements with this new technique. The endpoints used in the study were 1-year technical survival of the catheter, and the incidence of early (1 month) mechanical as well as infection complications. The catheter was implanted in 24 patients. The catheter survival rate was 100%; however, in two cases, the catheters were removed due to complications not associated with PD treatment. No early mechanical complications such as bleeding, hematoma, perforations, internal organ damage, exit site leaks, or hernia in the place of insertion were observed. Similarly, no early infectious complications were observed. During the 1-year follow-up, no catheter migration occurred. Our results showed that the new PCP technique is a safe and easy procedure that minimizes the occurrence of both mechanical and infectious complications and ensures good catheter survival. Full article

Due to the previously limited intra-articular diagnostic possibilities of the canine temporomandibular joint, an examination protocol for the canine temporomandibular joint (TMJ) was developed and tested in this study using a needle arthroscope. In total, the discotemporal (DTJ) and discomandibular (DMJ) joint compartments of 32 animals (64 TMJs) were examined arthroscopically. During the examinations, 15 anatomical landmarks per joint side were evaluated in regard to their visibility and accessibility. All arthroscopies were performed by the same examiner and the same assistant to ensure standard methods were applied. The examination procedure which was developed here proved to be a reliable tool for examining this joint. The 15 anatomical landmarks that were to be examined could be reliably visualised and assessed in all TMJs with a certainty of 86% to 100% by both observers. This tool provides clinicians with a reliable examination aid for everyday practice and ensures the comparability of results. In the future, this could provide an opportunity to better diagnose and treat TMJ pathologies. Full article

We present Synesth, the most comprehensive and flexible tool for tree reconciliation that allows for events on syntenies (i.e., on sets of multiple genes), including duplications, transfers, fissions, and transient events going through unsampled species. This model allows for building histories that explicate the inconsistencies between a synteny tree and its associated species tree. We examine the combinatorial properties of this extended reconciliation model and study various associated parsimony problems. First, the infinite set of explicatory histories is reduced to a finite but exponential set of Pareto-optimal histories (in terms of counts of each event type), then to a polynomial set of Pareto-optimal event count vectors, and this eventually ends with minimum event cost histories given an event cost function. An inductive characterization of the solution space using different algebras for each granularity leads to efficient dynamic programming algorithms, ultimately ending with an $O\left(mn\right)$ time complexity algorithm for computing the cost of a minimum-cost history (m and n: number of nodes in the input synteny and species trees). This time complexity matches that of the fastest known algorithms for classical gene reconciliation with transfers. We show how Synesth can be applied to infer Pareto-optimal evolutionary scenarios for CRISPR-Cas systems in a set of bacterial genomes. Full article

In recent years, pseudorabies virus (PRV) variants have resulted in an epidemic in swine herds and huge economic losses in China. Therefore, it is essential to develop an efficacious vaccine against the spread of PRV variants. Here, the triple-gene-deletion virus and the triple-gene-deletion plus gC virus were constructed by homologous recombination (HR). And then, their growth capacity, proliferation ability, and immune efficacy were evaluated. The results showed that the growth kinetics of the recombinant viruses were similar to those of the parental strain PRV-AH. Compared with the triple-gene-deletion virus group, the more dominant level of neutralizing antibody (NA) can be induced in the triple-gene-deletion plus gC virus group with the same 10^6.0 TCID₅₀ dose after 4 and 6 weeks post-initial immunization (PII) (p < 0.0001). In addition, the antibody titers in mice immunized with the triple-gene-deletion plus gC virus were significantly higher than those immunized with triple-gene deletion virus with the same 10^5.0 TCID₅₀ dose after 6 weeks PII (p < 0.001). More importantly, in the triple-gene-deletion plus gC virus group with 10^5.0 TCID₅₀, the level of NA was close to that in the triple-gene deletion virus group with 10^6.0 TCID₅₀ at 6 weeks PII. Meanwhile, the cytokines IL-4 and IFN-γ in sera were tested by enzyme-linked immunosorbent assay (ELISA) in each group. The highest level of IL-4 or IFN-γ was also elicited in the triple-gene deletion plus gC virus group at a dose of 10^6.0 TCID₅₀. After challenge with PRV-AH, the survival rates of the triple-gene deletion plus gC virus immunized groups were higher than those of other groups. In immunized groups with 10^5.0 TCID₅₀, the survival rate shows a significant difference between the triple-gene deletion plus gC virus group (75%, 6/8) and the triple-gene deletion virus group (12.5%, 1/8). In general, the immune efficacy of the PRV TK/gI/gE-deleted virus can be increased with additional gC insertion in mice, which has potential for developing an attenuated vaccine candidate for PRV control. Full article

Wolbachia, a group of Gram-negative symbiotic bacteria, infects nematodes and a wide range of arthropods. Diaphorina citri Kuwayama, the vector of Candidatus Liberibacter asiaticus (CLas) that causes citrus greening disease, is naturally infected with Wolbachia (wDi). However, the interaction between wDi and D. citri remains poorly understood. In this study, we performed a pan-genome analysis using 65 wDi genomes to gain a comprehensive understanding of wDi. Based on average nucleotide identity (ANI) analysis, we classified the wDi strains into Asia and North America strains. The ANI analysis, principal coordinates analysis (PCoA), and phylogenetic tree analysis supported that the D. citri in Florida did not originate from China. Furthermore, we found that a significant number of core genes were associated with metabolic pathways. Pathways such as thiamine metabolism, type I secretion system, biotin transport, and phospholipid transport were highly conserved across all analyzed wDi genomes. The variation analysis between Asia and North America wDi showed that there were 39,625 single-nucleotide polymorphisms (SNPs), 2153 indels, 10 inversions, 29 translocations, 65 duplications, 10 SV-based insertions, and 4 SV-based deletions. The SV-based insertions and deletions involved genes encoding transposase, phage tail tube protein, ankyrin repeat (ANK) protein, and group II intron-encoded protein. Pan-genome analysis of wDi contributes to our understanding of the geographical population of wDi, the origin of hosts of D. citri, and the interaction between wDi and its host, thus facilitating the development of strategies to control the insects and huanglongbing (HLB). Full article

This study investigates polyethylene glycol (PEG) homopolymer thin film adsorption on gold surfaces of controlled surface chemistry. The conformational states of physisorbed PEG are analyzed through polarization modulation infrared reflection–absorption spectrometry (PM-IRRAS). The PM-IRRAS principle is based on specific optical selection rules allowing the detection of surface-specific FTIR response of thin polymer films on the basis of differential reflectivity at the polymer/substrate interface for p- and s-polarized light. The intensification of the electric field generated at the PEG/substrate interface for p-polarized IR light in comparison with s-polarized light permits the analysis of PEG chain anisotropy and conformational changes induced by the adsorption. Results showed that PEG adsorbs on model substrates having a rather hydrophilic character in a way that the PEG chains spread parallel to the surface. In the case of a very hydrophilic substrate, the adsorbed PEG chains are in a stable thermodynamic state which allows them to arrange and crystallize as stacked crystalline lamellae after adsorption. The surface topography and morphology of the PEG thin films were also investigated by atomic force microscopy (AFM). While in the bulk state, PEG crystallizes in the form of large spherulites; on substrates whose adsorption is favored by surface chemistry, PEG crystallizes in the form of stacked lamellae with a thickness equal to 20 nm. Conversely, on a hydrophobic substrate, the PEG chains do not crystallize and adsorption occurs in the statistical coil state. Full article

Rice straw presents challenges as livestock feed due to its low digestibility and the presence of chemical residues. One potential solution is to focus on breeding brittle varieties that possess disease-resistance traits. In this study, AZ1803, a brittle mutant line isolated from the IR64 mutant pool, was chosen for gene identification and breeding. The AZ1803 mutant was crossed to the TNG67 variety to generate a mapping population and to the CS11 variety for fine mapping and breeding. The gene was mapped on chr. 10 between RM467 and RM171 SSR markers and was narrowed down to RM271 and RM5392 with 600 kb proximately interval. The AZ1803 and IR64 sequencing results revealed a substitution mutant in the Exon 9th of the OsCesA7 gene, resulting in an amino acid mutation at the end of the transmembrane domain 5th of the CESA7, responsible for cellulose synthesis for the secondary cell wall. The cellulose content of AZ1803 was reduced by 25% compared with the IR64. A new brittle and disease-resistant variety was bred by using developed markers in marker-assisted selection. In addition, bending tests and bacterial blight inoculation were applied. The bacterial lesion length of the bred variety is 64% lower than that of AZ1803. The rice straw of the new variety can be used for livestock feeding, which increases farmer income and reduces pesticide residues and air pollution from straw burning. Full article

The jet dynamics during cavitation bubble collapsing between unequal-sized dual particles are investigated utilizing a numerical model that combines the finite volume approach alongside the volume of fluid approach. The model incorporates the compressibility of the two-phase fluid and accounts for mass and heat transfer between two phases. The computational model utilizes an axisymmetric model, where the axis of symmetry is defined as the line that connects the centers of the particles and the bubble. A comprehensive analysis is presented on the influence of the particle radius and bubble–particle distance on the jet behavior. Furthermore, the variations of surface pressure on the particles induced by jet impingement are quantitatively analyzed. Four distinct jet behaviors are categorized, depending on the formation mechanism, as well as the number and the direction of the jets. For case 1, the bubble produces a single jet directed toward a small particle; for case 2, the bubble fragments produces double jets receding from each other; for case 3, the bubble produces double jets approaching each other; and for case 4, the bubble produces a single jet directed toward a large particle. The pressure perturbations induced by jet impingement upon the particles exceed those caused by shock wave impacts. The larger the bubble volume at the moment of jet formation, the longer the duration of the pressure variation caused by the jet impinging on the particles. Full article

Designs for remanufacturing (DfRem) consider the remanufacturability of the product in the early stages of product design, which can greatly increase the reusability of the products. However, product design schemes lack reasonable evaluation indicators for remanufacturability, and the decision-makers of the design scheme have subjective preferences and vague hesitation. These result in inaccurate decision making on DfRem schemes that will affect the successful implementation of product remanufacturing. In order to improve the accuracy of the DfRem scheme decision, a fuzzy decision-making method for green design for remanufacturability is proposed. Firstly, an evaluation indicator system for green design schemes was established that takes into account remanufacturability, reliability, cost, and the environment, and the entropy weighting method is used to quantify and weigh the design scheme evaluation indicators. Then, the hesitation fuzzy set is applied to construct the set of evaluations and the optimal design scheme is selected by applying the comprehensive evaluation method. Finally, the feasibility of the above method is verified by using the green design of an injection mold as an example, and the results show that the above method is able to make accurate and effective design scheme decisions. This method has been implemented in a prototype system using Visual Studio 2022 and Microsoft SQL Server2022. The results show that the fuzzy decision-making system is accurate and effective for rapidly generating a rational green design scheme for remanufacturability. Full article

Membrane contactors are among the available technologies that allow a reduction in the amount of ammoniacal nitrogen released into the environment through a process called transmembrane chemical absorption (TMCA). This process can be operated with different substances acting as trapping solutions; however, strong inorganic acids have been studied the most. The purpose of this study was to demonstrate, at laboratory scale, the performance of citric acid as a capturing solution in TMCA processes for recovering ammonia as an organic fertilizer from anaerobic digestor reject water using membrane contactors in a liquid–liquid configuration and to compare it with the most studied solution, sulfuric acid. The experiments were carried out at 22 °C and 40 °C and with a feed water pH of 10 and 10.5. When the system was operated at pH 10, the rates of recovered ammonia from the feed solution obtained with citric acid were 10.7–16.5 percentage points (pp) lower compared to sulfuric acid, and at pH 10.5, the difference decreased to 5–10 pp. Under all tested conditions, the water vapor transport in the system was lower when using citric acid as the trapping solution, and at pH 10 and 40 °C, it was 5.7 times lower. When estimating the operational costs for scaling up the system, citric acid appears to be a better option than sulfuric acid as a trapping solution, but in both cases, the process was not profitable under the studied conditions. Full article

Global climate change has exacerbated alterations in urban thermal environments, significantly impacting the daily lives and health of city residents. Measuring and understanding urban land surface temperatures (LST) and their influencing factors is important in addressing global climate change and enhancing the well-being of residents. However, due to limitations in data precision and analytical methods, existing studies often overlook the microscale examination closely related to residents' daily lives, and lack a deep exploration of the spatial heterogeneity of the influencing factors. This leads to these results being ineffective in guiding the planning and construction of cities. Taking Shenzhen as a case study, our study investigates the effects of various microscale build environment characteristics of LST using street view images and machine learning. A convolutional neural network model adopting the SegNet architecture is used to perform semantic segmentation on street view images, extracting features of the microscale urban-built environment. The LST is inverted through the Google Earth Engine (GEE) platform. By using Multiscale Geographically Weighted Regression (MGWR) models, our study reveals the comprehensive impact of the urban-built environment on LST and its significant spatial heterogeneity. The findings indicate that the proportions of sky, roads, and buildings are positively correlated with LST, while trees have a significant cooling effect. Although earth and water can reduce LST, their overall contribution is minimal due to limitations in their area and distribution patterns. This study not only reveals the key factors affecting urban LST at the microscale but also emphasizes the necessity of considering the spatial heterogeneity of these factors' impacts. This suggests the need for targeted strategies for different areas to effectively improve the urban thermal environment and achieve sustainable urban development. Full article

Simulated (sim) racing is an emerging esport that has garnered much interest in recent years and has been a relatively under-researched field in terms of expertise and performance. When examining expertise, visual attention has been of particular interest to researchers, with eye tracking technology commonly used to assess visual attention. In this study, we examined the overt visual attention allocation of high- and low-skilled sim racers during a time trial task using Tobii 3 glasses. In the study, 104 participants were tested on one occasion, with 88 included in the analysis after exclusions. Participants were allocated to either group according to their fastest lap times. Independent t-tests were carried out with sidak corrections to test our hypotheses. Our results indicate that when eye tracking metrics were normalised to the lap time and corner sector time, there was a difference in the relative length of overt attention allocation (fixation behaviour) as lower-skilled racers had significantly greater total fixation durations in laps overall and across corner sectors when normalised (p = 0.013; p = 0.018). Interestingly, high- and low-skilled sim racers differed in where they allocated their attention during the task, with high-skilled sim racers allocating significantly less overt attention to the track relative to other areas of the display (p = 0.003). This would allow for higher-skilled racers to obtain relatively more information from heads-up display elements in-game, all whilst driving at faster speeds. This study provides evidence that high-skilled sim racers appear to need significantly less overt attention throughout a fast lap, and that high- and low-skilled sim racers differ in where they allocate their attention while racing. Full article

Bacteriophages are currently considered one of the most promising alternatives to antibiotics under the ‘One Health’ approach due to their ability to effectively combat bacterial infections. This study aimed to characterize Vibrio species in hatchery water samples collected from an aquaculture farm and investigate the biocontrol potential of their bacteriophages. Vibrio spp. (n = 32) isolates confirmed by LNA probe-based qPCR were used as hosts. Three Vibrio phages were isolated. IKEM_vK exhibited a broad host range, infecting V. harveyi (n = 8), V. alginolyticus (n = 2), V. azureus (n = 1), and V. ordalii (n = 1). IKEM_v5 showed lytic activity against V. anguillarum (n = 4) and V. ordalii (n = 1), while IKEM_v14 was specific to V. scophtalmi (n = 4). The morphological appearance of phages and their lytic effects on the host were visualized using scanning electron microscopy (SEM). All three phages remained relatively stable within the pH range of 6–11 and up to 60 °C. The lytic activities and biofilm inhibition capabilities of these phages against planktonic Vibrio cells support their potential applications in controlling vibriosis in aquaculture systems. Full article

Due to immunosuppression, transplant recipients are at higher risk of infections with SARS-CoV-2 and worse clinical outcomes than immunocompetent hosts. Furthermore, lung transplant patients represent a special group among solid organ recipients, since pneumonia is the main manifestation of COVID-19. However, data on the course of disease and the changes in morbidity and mortality during the course of the pandemic are limited. In our pulmonary rehabilitation clinic, we treat patients shortly after lung transplant as well as long-term transplant patients. Over the last almost 4 years of pandemic, we witnessed several COVID-19 infections in lung transplant patients in our clinic as well as patients who acquired an infection beforehand. In this paper, we aim at retrospectively describing a series of recent COVID-19 cases in our clinic, looking at the clinical course of disease and outcomes in lung transplant patients. Full article

The only currently active industrial-scale plant that uses coal mine brines, located in Czerwionka-Leszczyny, uses ZOD (Zakład Odsalania Dębieńsko, the name of the plant’s former owner) technology, based on mechanical vapor compression evaporators. The plant produces evaporated salt that meets the specifications for edible salt; however, the technology is highly energy-consuming. The presented work focuses on the modeling of ZOD technology if applied to the water treatment of the ‘Ziemowit-650’ coal mine. Using the results of bench-scale investigation of brine nanofiltration and a mathematical model of ZOD technology based on Czerwionka-Leszczyny performance, the energy consumption per ton of produced salt was estimated for two cases: (1) ZOD technology treating the ‘Ziemowit-650’ brine and (2) ZOD technology treating the permeate of nanofiltration (NF) working on the ‘Ziemowit-650’ brine. The sensitivity of the system was investigated in the range of −10% to + 10% of Cl⁻, SO₄²⁻, Mg²⁺, and Ca²⁺ concentration, assuming that the sodium concentration also changes to meet the electroneutrality requirement. The results show that nanofiltration pretreatment not only decreases energy consumption but it also makes salt production less sensitive to fluctuations in feed water composition. Full article

This research study focused on the effect of adding boric acid to epoxy resin in order to obtain a composite material with improved properties and performance. To this end, a fine powder of boric acid (H₃BO₃) was introduced into epoxy resin in different amounts, i.e., 0.5 g, 1.0 g, and 1.5 g. As the matrix of the epoxy composites, styrene-modified epoxy resin based on bisphenol A (BPA) (Epidian 53) was used. It was cross-linked with two types of curing agents, i.e., an amine (ET) and a polyamide (PAC). The mechanical properties of the obtained epoxy composites (in terms of compressive strength, compressive modulus, and compressive strain) were determined at room temperature in order to assess the effect of the addition of boron acid and of the type of curing agent employed to cure the epoxy on these characteristics. Calorimetric measurements were made to highlight any changes in the glass transition temperature (Tg) as a result of the addition of boric acid to epoxy resin. Finally, flammability tests were performed on both Epidian 53/PAC and Epidian 53/ET epoxy composites to analyze their fire behavior and consequently establish the effectiveness of the selected additive as a flame retardant. Full article

This study investigates the association between epigenetic age acceleration (EAA) derived from DNA methylation and the risk of incident colorectal cancer (CRC). We utilized data from a random population sample of 9,360 individuals (men and women, aged 45-69) from the HAPIEE Study who had been followed up for 16 years. A nested case–control design yielded 35 incident CRC cases and 354 matched controls. Six baseline epigenetic age (EA) measures (Horvath, Hannum, PhenoAge, Skin and Blood (SB), BLUP, and Elastic Net (EN)) were calculated along with their respective EAAs. After adjustment, the odds ratios (ORs) for CRC risk per decile increase in EAA ranged from 1.20 (95% CI: 1.04-1.39) to 1.44 (95% CI: 1.21-1.76) for the Horvath, Hannum, PhenoAge, and BLUP measures. Conversely, the SB and EN EAA measures showed borderline inverse associations with ORs of 0.86-0.87 (95% CI: 0.76-0.99). Tertile analysis reinforced a positive association between CRC risk and four EAA measures (Horvath, Hannum, PhenoAge, and BLUP) and a modest inverse relationship with EN EAA. Our findings from a prospective population-based-case-control study indicate a direct association between incident CRC and four markers of accelerated baseline epigenetic age. In contrast, two markers showed a negative association or no association. These results warrant further exploration in larger cohorts and may have implications for CRC risk assessment and prevention. Full article