Mathews, Mark A; von Huene, Roland (1985): (Table 5) Methane hydrate content from clls normalized resistivity at DSDP Site 84-570 [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.804446, In supplement to: Mathews, MA; von Huene, R (1985): Site 570 methane hydrate zone. In: von Heune, R; Aubouin, J; et al. (eds.), Initial Reports of the Deep Sea Drilling Project, Washington (U.S. Govt. Printing Office), 84, 773-790, https://doi.org/10.2973/dsdp.proc.84.134.1985
Always quote citation above when using data! You can download the citation in several formats below.
Project(s):
Deep Sea Drilling Project (DSDP)
Coverage:
Latitude: 13.285300 * Longitude: -91.392800
Date/Time Start: 1982-02-17T00:00:00 * Date/Time End: 1982-02-17T00:00:00
Minimum DEPTH, sediment/rock: 264.32 m * Maximum DEPTH, sediment/rock: 273.82 m
Event(s):
84-570_Site * Latitude: 13.285300 * Longitude: -91.392800 * Date/Time: 1982-02-17T00:00:00 * Elevation: -1698.0 m * Penetration: 4.019 m * Recovery: 1.645 m * Location: North Pacific/SLOPE * Campaign: Leg84 * Basis: Glomar Challenger * Method/Device: Composite Core (COMPCORE) * Comment: 40 cores; 382.6 m cored; 19.3 m drilled; 43% recovery
Parameter(s):
# | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
---|---|---|---|---|---|---|
1 | Interval Cored | Cored | m | Mathews, Mark A | Minimum; total depth from the drill floor = water depth + sediment depth | |
2 | Interval Cored | Cored | m | Mathews, Mark A | Maximum; total depth from the drill floor = water depth + sediment depth | |
3 | Depth, top/min | Depth top | m | Mathews, Mark A | ||
4 | Depth, bottom/max | Depth bot | m | Mathews, Mark A | ||
5 | DEPTH, sediment/rock | Depth sed | m | Geocode – mbsf | ||
6 | Thickness | Thick | m | Mathews, Mark A | ||
7 | Methane | CH4 | % | Mathews, Mark A | As Methane hydrate |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
48 data points