Abstract
The performance and lifetime of micro electro mechanical systems (MEMS) is strongly affected by friction and wear. We therefore analysed the friction and wear characteristics of microstructures produced by the LIGA-process. The measurements were carried out in a special designed microtribometer, which is capable to work inside a scanning electron microscope (SEM), and hence offering the possibility of a high resolution in-situ observation of the microscopic tribological mechanism during operation of the system.
The material combinations investigated were chosen in order to represent the most important tribological junctions occurring in the ‘micro-motor’ and ‘micro-turbine’ currently produced by the LIGA-technique. We studied the tribological properties of nickel-nickel micro components (LIGA-side-wall/LIGA-sidewall and LIGA-bottom side/LIGA-top side), as well as nickel micro components (bottom side)-Al2O3-ceramic substrates (contact between rotor-base).
The results indicate a strong influence of the relative humidity level (RHL) on the friction and wear properties of the metal/ceramic as well as of the metal/metal contacts appearing in the LIGA-MEMS, showing the lowest level of friction and wear at high RHL-values. We also found out that the friction and wear parameters were highly influenced by the applied surface pressure. Changing the surface pressure results in the formation of different kinds of wear debris accumulating or smearing out in the wear track. The metal oxides produced hereby in the wear track can lower adhesion and thus reduce the friction of the system.
Similar content being viewed by others
References
Mehregany M;Tai Y-C (1991) Surface micromachined mechanisms and micromotors. J. Micromech. Microeng. 1: 73–85
Gabriel KJ;Behi F;Mahadevan R;Mehregany M (1990) In situ Friction and Wear measurements in Integrated Polysilicon Mechanisms. Sensors and Actuators. A21–A23: 184–188
Tai Y-C;Muller RS (1990) Frictional Study of IC-processed Micromotors. Sensors and Actuators. A21–A23: 180–183
Mehregany M;Bart SF;Tavrow LS;Lang JH;Senturia SD;Schlecht MF (1990) A study of Three Microfabricated Variable capitance Motors. Sensors and Actuators. A21–A23: 173–179
Bart SF;Mehregany M;Tavrow LS;Lang JH;Senturia SD (1990) Measurements of Electric Micromotor Dynamics. In: Cho D (ed) Microstructures. Sensors and Actuators, New York
Deng K;Ko WH (1992) A study of static friction between silicon compounds. J. Micromech. Microeng. 2: 14–20
Beerschwinger U;Mathieson D;Reuben RL;Yang SJ (1990) A study of wear on MEMS contact morphologies. J. Micromech. Microeng. 4: 95–105
Beerschwinger U; Mathieson D; Reuben RL; Yang SJ; Dhariwal RS; Ziad H (1994) Tribological Measurements for MEMS Applications. Proceedings of the Micro System Technologies, Berlin. 115–124
Kaneko R (1991) Microtribology Related To MEMS-Concept, Measurements, Applications. Proceedings of the IEEE 4th. Workshop on MEMS, Nara, Japan 1–8
Noguchi K; Fujita H; Suzuki M; Yoshimura N (1991) The Measurements of Friction on Micromechatronics Elements. Proceedings of the IEEE 4th. Workshop on MEMS, Nara, Japan 148–153
Suzuki S; Matsuura T; Uchizawa M; Yura S; Shibata H; Fujita H (1991) Friction and Wear Studies on Lubricants and Materials Applicable to MEMS. Proceedings of the IEEE 4th. Workshop on MEMS, Nara, Japan 143–147
Mehregany M; Senturia SD; Lang JH (1990) Friction and Wear in microfabricated harmonic side-drive motors. IEEE Solid State Sensor and Actuator Workshop, Hilton Head S.C., USA, Technical Digest 17–22
Beerschwinger U;Yang SJ;Reuben RL;Taghizadeh MR;Wallrabe U (1994) Friction Measurements on LIGA-processed microstructures. J. Micromech. Microeng. 4: 14–22
Bhushan B (1990) Tribology and Mechanics of Magnetic Storage Devices. Springer, New York
Hedenquist P;Olsson M;Hogmark S;Bhushan B (1992) Tribological studies of various magnetic heads and thin-film rigid disks. Wear 153: 65–78
Menz W;Bley P (1993) Mikrosystemtechnik für Ingenieure. VCH, Weinheim
Wallrabe U;Bley P;Krevet B;Menz W;Mohr J (1994) Design Rules and test of electrostatic micromotors made by the LIGA process. J. Micromech. Microeng. 4: 40–45
Mohr J;Bley P;Strohrmann M;Wallrabe U (1992) Microactuators fabricated by the LIGA-process. J. Micromech. Microeng. 2: 234–241
Himmelhaus M;Bley P;Mohr J;Wallrabe U (1992) Integrated measuring system for the detection of the revolutions of LIGA microturbines in view of a volumetric flow sensor. J. Micromech. Microeng. 2: 196–198
Czichos H;Habig KH (1992) Tribologiehandbuch, Reibung und Verschlei\. Vieweg, Braunschweig, 34lf
Gates RS;Hsu SM;Klaus EE (1989) Tribochemical mechanism of alumina with water. Tribol. Trans. 32: 357
Takadoum J;Zsiga Z (1993) Effect of water vapour in air on friction and wear of Al2O3, Si3N4 and partially stabilized zirconia sliding on various metals. J. Mat. Sci. Lett. 12: 791–793
Pepper SV (1976) Effect of adsorbed films on friction of Al2O3-metal systems. J. Appl. Phys. 47: (6) 2579–2583
Buckley DH (1981) Surface effects in Adhesion, Friction, Wear and Lubrication. Elsevier, Amsterdam
Akagi T;Rigney DA (1991) Sliding friction and wear of metals in vacuum. Wear 149: 353–374
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bieger, T., Wallrabe, U. Tribological investigations of LIGA-microstructures. Microsystem Technologies 2, 63–70 (1996). https://doi.org/10.1007/BF02447752
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02447752