Abstract
Changes occurring in the chemical composition, microstructure, mechanical properties, and carburization behavior of type 316LN stainless steel and modified 9Cr-1Mo steel on exposure to flowing sodium at 798 K (525 °C) for 16,000 hours in a bimetallic loop are discussed in this article. Type 316LN stainless steel revealed a degraded layer of approximately 5 μm depth. No significant microstructural changes were observed in the case of modified 9Cr-1Mo steel exposed to sodium. The carburization depth in type 316LN stainless steel was approximately 100 μm and the surface carbon concentration was 0.374 wt pct. In the case of modified 9Cr-1Mo steel, the carbon concentration at the surface was approximately 3.50 wt pct and the depth of carburization was nearly 75 μm. The concentration of nickel and chromium decreased from the bulk to the surface of type 316LN stainless steel, leading to the formation of a ferrite layer. The concentration of these two elements reached the original matrix concentration at around 30 μm. Sodium-exposed material indicated an increase in yield strength by 10 pct and reduction in ductility by 34 pct vis-à-vis annealed material. No such changes in strength and ductility were observed in the case of modified 9Cr-1Mo steel. A decrease in impact energy was noticed for sodium-exposed type 316LN stainless steel and modified 9Cr-1Mo steel vis-à-vis as-received material.
Similar content being viewed by others
References
H.U. Borgstedt and C.K. Mathews: Applied Chemistry of Alkali Metals, Plenum Press, New York, NY, 1987.
S.P. Awasti and H.U. Borgstedt: J. Nucl. Mater., 1983, vol. 116, pp. 103-11.
A.W. Thorley, A. Blundell, and J.A. Bardsley: Material Behaviour and Physical Chemistry in Liquid Metal Systems, H.U. Borgstedt, ed., Plenum Press, New York, NY, 1981, pp. 5–18.
S. Rajendran Pillai, H.S. Khatak, and J.B. Gnanamoorthy: J. Nucl. Mater., 1995, vol. 224, pp. 17-24.
A.M. Azad, O.M. Sreedharan, and J.B. Gnanamoorthy: J. Nucl. Mater., 1987, vol. 144, pp. 94-104.
A.M. Azad, O.M. Sreedharan, and J.B. Gnanamoorthy: J. Nucl. Mater., 1987, vol. 151, pp. 293-300.
S. Rajendran Pillai and H.S. Khatak: Corrosion of Austenitic Stainless Steels: Mechanisms, Mitigation and Monitoring, H.S. Khatak and Baldev Raj, eds., Narosa Publishing, New Delhi, India, 2002, pp. 241–64.
N. Sivai Bharasi, K. Thyagarajan, H. Shaikh, A.K. Balamurugan, Santanu Bera, S. Kalavathy, K. Gurumurthy, R.K. Dayal, K.K. Rajan, and H.S. Khatak: J . Nucl. Mater., 2008, vol. 377, pp. 378–84.
T. Gnanasekaran and C.K. Mathews: J. Nucl. Mater., 1986, vol. 140, pp. 202-13.
S. Rajendran Pillai, H.S. Khatak, and J.B. Gnanamoorthy: Mater. Trans., 1998, vol. 39, pp. 370-77.
K. Natesan, M. Li, O.K. Chopra, and S. Majumdar: J. Nucl. Mater., 2009, vol. 392, pp. 243-48.
T. Suzuki, I. Mutoh, T. Yagi, and Y. Ikenaga: J. Nucl. Mater., 1986, vol. 139, pp. 97-105.
H. Huthman, G. Menken, H.U. Borgstedt, and T. Tass: Proc. Second Int. Conf. on Liquid Metal Technology in Energy Production, J.M. Dahlke, ed., Richland, Washington, DC, 1980.
C.K. Mathews, T. Gnanasekaran, and S. Rajendran Pillai: Trans. Indian Inst. Met., 1987, vol. 40, pp. 89-103.
H.S. Khatak, H. Shaikh, and J.B. Gnanamoorthy: Proc. 4th Int. Conf. on ‘Liquid Metal Engineering and Technology, Avignon, France, 1988.
K. Natesan, T.F. Kassner, and C.Y. Li: Reactor Technol., 1972, vol. 15, pp. 244-76.
K. Natesan, O.K. Chopra, and T.F. Kassner: J. Nucl. Mater., 1991, vol. 73, pp.137-50.
G.J. Lloyd: Atom. Energ. Rev., 1978, vol. 16, pp.155-208.
J.L. Krankota: Eng. Mater. Tech., 1976, vol. 98, pp. 9–16.
Y. Wada, T. Asagama, and R. Komine: International Working Group on Fast Reactors, KFK-4935, H.U. Borgstedt, ed., Karlsruhe, Germany, 1991, pp. 149–59.
H.U. Borgstedt and H. Huthmann: J. Nucl. Mater., 1991, vol. 183, pp. 127-36.
M.P. Mishra, H.U. Borgstedt, G. Frees, B. Seith, S.L. Mannan, P. Rodriguez, and J.B. Gnanamoorthy: J. Nucl. Mater., 1993, vol. 200, pp. 244-55.
S.R. Pillai, H.S. Khatak, N. Sivai Bharasi, A.K. Tyagi, and R.D. Kale: Trans. Indian Inst. Met., 1997, vol. 50, pp. 103-10.
V.T. Paul, S. Saroja, and M.Vijayalakshmi: J. Nucl. Mater, 2008, vol. 378, pp. 273-81.
W.B. Jones, C.R. Hills, and D.H. Polonis: Metall. Trans. A, 1991, vol. 22A, pp. 1049-58.
T.D. Claar: Reactor Technol., 1970, vol. 3, pp. 124-46.
B.H. Kolster: J . Nucl. Mater., 1975, vol. 55, pp. 155-68.
S. Saroja, P. Parameswaran, M. Vijayalakshmi, and V.S. Raghunathan: Acta Metall. Mater., 1995, vol. 3, no. 8, pp. 2985-3000.
H.S. Khatak: Proc. Int. Conf. on Emerging Trends in Corrosion Control, New Delhi, India, 1999, pp. 693-701.
S.R. Pillai, H.S. Khatak, J.B. Gnanamoorthy, S. Velmurugan, A.K. Tyagi, R.D. Kale, K. Swaminathan, M. Rajan, and K.K. Rajan: Mater. Sci. Technol., 1997, vol. 13, pp. 937-43.
C. Sudha, N. Sivai Bharasi, R. Anand, H. Shaikh, R.K. Dayal, and M. Vijayalakshmi: J. Nucl. Mater., 2010, vol. 402, pp. 186-95.
K. Natesan and T.F. Kassner: J. Nucl. Mater., 1970, vol. 37, pp. 223-25.
http://www.msm.cam.ac.uk/phastrans/2005/Stainless_steels/stainless.html.
A.W. Thorley, A. Blundell, and J. A. Bardsley: Material Behaviour and Physical Chemistry in Liquid Metal Systems, Plenum Press, New York, NY, 1981, pp. 5-17.
T. Kataoka and K. Matsumoto: 2nd Int. Conf. Liquid Metal Technology in Energy Production Proceedings, Richland, Washington, DC, 1988.
H. Mimura, T. Ito, and E. Yoshida: Proc. 4th Int. Conf. Liquid Metal Engineering and Technology, Avignon, France, 1988.
R. Ainsley, P. Linda, M. Hartlib, P.M. Holroyd, and G. Long: J. Nucl. Mater., 1974, vol. 52, pp. 255-76.
T. Ito, S. Kato, M. Aoki, E. Yoshida, T. Kobayachi, and Y. Wada: J. Nucl. Sci. Tech., 1992, vol. 29, pp. 367-77.
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted January 28, 2011.
Rights and permissions
About this article
Cite this article
Sivai Bharasi, N., Thyagarajan, K., Shaikh, H. et al. Evaluation of Microstructural, Mechanical Properties and Corrosion Behavior of AISI Type 316LN Stainless Steel and Modified 9Cr-1Mo Steel Exposed in a Dynamic Bimetallic Sodium Loop at 798 K (525 °C) for 16,000 Hours. Metall Mater Trans A 43, 561–571 (2012). https://doi.org/10.1007/s11661-011-0884-8
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-011-0884-8