Motivated by two definitions of distance, “pre-symmetric w-distance” and “w-cone distance”, we define the concept of a pre-symmetric w-cone distance in a TVS-CMS and introduce its properties and examples. Also, we discuss the TVS-cone version of the recent results obtained by Romaguera and Tirado. Meanwhile, using Minkowski functionals, we show the equivalency between some consequences concerning a pre-symmetric w-distance in a usual metric space and a pre-symmetric w-cone distance in a TVS-CMS. Then, some types of various w-cone-contractions and the relations among them are investigated. Finally, as an application, a characterization of the completeness of TVS-cone metric regarding pre-symmetric concept is performed, which differentiates our results from former characterizations. Full article

The diketopyrrolopyrrole (DPP) unit represents one of the building blocks more widely employed in the field of organic electronics; in most of the reported DPP-based small molecules, this unit represents the electron acceptor core symmetrically coupled to donor moieties, and the solubility is guaranteed by functionalizing lactamic nitrogens with long and branched alkyl tails. In this paper, we explored the possibility of modulating the solubility by realizing asymmetric DPP derivatives, where the molecular structure is extended in just one direction. Four novel derivatives have been prepared, characterized by a common dithyenil-DPP fragment and functionalized on one side by a thiophene unit linked to different auxiliary electron acceptor groups. As compared to previously reported symmetric analogs, the novel dyes showed an increased solubility in chloroform and proved to be soluble in THF as well. The novel dyes underwent a thorough optical and electrochemical characterization. Electronic properties were studied at the DFT levels. All the dyes were used as active layers in organic field effect transistors, showing balanced charge transport properties. Full article

Background: Admission for renal biopsy is considered the gold standard for diagnosing kidney disease. However, prolonged waiting times for admission can lead to delayed diagnosis. Despite this issue, there are currently no studies demonstrating how to improve the efficiency of renal biopsy procedures. Methods: We initiated a quality improvement project to implement pre-admission testing (PAT) for renal biopsy from 2016 to 2024 (until 15 April). Our evaluation focused on waiting times for admission, length of admission periods, hospitalization expenses, percentage of cases with no renal biopsy performed, incidence of severe bleeding due to renal biopsy, and percentage of cases with adequate tissue samples obtained. Additionally, we highlighted the time periods during the outbreak of SARS-CoV-2. Results: The highest annual case number was observed in time period 1 (168.3/year). Following the outbreak of SARS-CoV-2, there was a notable decrease in case numbers during time period 2 (119.8), which then increased to 143.0 in time period 3 (post-SARS-CoV-2 era). The mean waiting time was 13.72 ± 40.30 days for time period 1 and 10.00 ± 47.80 days for time period 2, without statistical significance. Following the implementation of PAT, patients now only need to wait approximately 0.76 days for admission, representing a significant reduction in waiting time. Subsequently, following the implementation of PAT, the waiting time decreased significantly to 2.09 ± 2.65 days. Additionally, hospitalization expenses per patient significantly decreased from approximately USD 69.62 ± 97.09 to USD 41.66 ± 52.82. The percentage of missed biopsy is significantly low (p < 0.001). Severe bleeding events (indicated as embolization and blood transfusion) were consistent across the three time periods (p = 0.617). Conclusions: The implementation of PAT can improve the pre-admission process for renal biopsy, resulting in decreased waiting times, fewer missed appointments, shorter admission durations, and reduced hospitalization expenses. We propose implementing PAT for outpatient individuals awaiting in-hospital renal biopsy procedures to mitigate delayed diagnosis, reduce pre-admission waiting periods, and streamline admission processes, thereby enhancing overall patient care efficiency. Full article

Chickpeas are more sustainable than other food systems and have high a nutritional value, especially regarding their vitamin composition. One of the main vitamins in chickpeas is vitamin B6, which is very important for several human metabolic functions. Since chickpeas are consumed after cooking, our goal was to better understand the role of leaching (diffusion) and thermal degradation of vitamin B6 in chickpeas during hydrothermal processing. Kinetics were conducted at four temperatures, ranging from 25 to 85 °C, carried out for 4 h in an excess of water for the diffusion kinetics, or in hermetic bags for the thermal degradation kinetics. Thermal degradation was modeled according to a first-order reaction, and diffusion was modeled according to a modified version of Fick’s second law. Diffusivity constants varied from 4.76 × 10⁻¹⁴ m²/s at 25 °C to 2.07 × 10⁻¹⁰ m²/s at 85 °C; the temperature had an impact on both the diffusivity constant and the residual vitamin B6. The kinetic constant ranged from 9.35 × 10⁻⁶ at 25 °C to 54.9 × 10⁻⁶ s⁻¹ at 85 °C, with a lower impact of the temperature. In conclusion, vitamin B6 is relatively stable to heat degradation; loss is mainly due to diffusion, especially during shorter treatment times. Full article

The morphological architecture of inflorescence influences seed production. The regulatory mechanisms underlying alfalfa (Medicago sativa) inflorescence elongation remain unclear. Therefore, in this study, we conducted a comparative analysis of the transcriptome, proteome, and metabolome of two extreme materials at three developmental stages to explore the mechanisms underlying inflorescence elongation in alfalfa. We observed the developmental processes of long and short inflorescences and found that the elongation capacity of alfalfa with long inflorescence was stronger than that of alfalfa with short inflorescences. Furthermore, integrative analysis of the transcriptome and proteome indicated that the phenylpropanoid biosynthesis pathway was closely correlated with the structural formation of the inflorescence. Additionally, we identified key genes and proteins associated with lignin biosynthesis based on the differential expressed genes and proteins (DEGs and DEPs) involved in phenylpropanoid biosynthesis. Moreover, targeted hormone metabolome analysis revealed that IAA, GA, and CK play an important role in the peduncle elongation of alfalfa inflorescences. Based on omics analysis, we detected key genes and proteins related to plant hormone biosynthesis and signal transduction. From the WGCNA and WPCNA results, we furthermore screened 28 candidate genes and six key proteins that were correlated with lignin biosynthesis, plant hormone biosynthesis, and signaling pathways. In addition, 19 crucial transcription factors were discovered using correlation analysis that might play a role in regulating candidate genes. This study provides insight into the molecular mechanism of inflorescence elongation in alfalfa and establishes a theoretical foundation for improving alfalfa seed production. Full article

Silver nanoparticles (AgNPs) can be produced safely and greenly using water hyacinth, an invasive aquatic plant, as a reducing agent. This study aimed to optimize the UV-irradiation parameters for the synthesis of AgNPs from water hyacinth leaf extract. The study varied the reaction time and pH levels and added a stabilizing agent to the mixture. The synthesized AgNPs were characterized using UV-visible spectroscopy (UV-vis), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and inductively coupled plasma optical emission spectroscopy (ICP-OES). The findings revealed that the optimal conditions for synthesizing AgNPs were achieved by adjusting the pH level to 8.5, adding starch as a stabilizing agent, and exposing the mixture to UV-A radiation for one hour. These conditions resulted in the smallest size and highest quantity of AgNPs. Furthermore, the synthesized AgNP colloids remained stable for up to six months. This study highlights the potential of utilizing water hyacinth as a sustainable and cost-effective reducing agent for AgNP synthesis, with potential applications in pharmaceuticals, drug development, catalysis, and sensing detection. Full article

This study examined the possibility of using various types of waste paper—used newsprint (NP), used lightweight coated paper (LWC), used office paper (OP), and used corrugated cardboard (CC)—for the removal of anionic dyes, Acid Red 18 (AR18) and Acid Yellow 23 (AY23), and cationic dyes, Basic Violet 10 (BV10) and Basic Red 46 (BR46), from aqueous solutions. The scope of this research included the characterization of sorbents (FTIR, SEM, BET surface area, porosity, pH_PZC, effectiveness of water coloration), determination of pH effect on the effectiveness of dye sorption, sorption kinetics (pseudo-first-order model, second-order model, intraparticular diffusion model), and the maximum sorption capacity (Langmuir models and Freundlich model) of the tested sorbents. The use of waste paper materials as sorbents was found to not pose any severe risk of aquatic environment contamination. AR18, AY23, and BV10 sorption intensities were the highest at pH 2, and that of RB46 at pH 6. The waste paper sorbents proved particularly effective in removing cationic dyes, like in the case of, e.g., NP, which had a sorption capacity that reached 38.87 mg/g and 90.82 mg/g towards BV10 and BR46, respectively, and were comparable with that of selected activated carbons (literature data). Full article

This article describes a transport planning model which applies a simulation to support decision-making in quarry operations. The analysis of the transport system was used as input for creating the model and the subsequent research. There are five loading points in the quarry from which, according to the plan, the quarry stone is transported to the crusher, where it proceeds for further processing. The required daily capacity of the downstream technological line is 3800 t/day. Based on the analysis, it was found that it was impossible to fulfill this requirement from the two loading points which were the furthest from the unloading point. For this reason, two simulation models of the transport system were created. The first simulation model is a transport system (loading, removal and dumping of quarry stone) from one loading point. Simulation experiments were performed on this model for all loading points. The findings from the analysis confirmed the results of the simulation experiments. Subsequently, a model of the combined quarry stone removal from two loading points was proposed. The model was designed for two variants of dividing the work shift into two work sections. In the model, which had a tabular form, the combinations of loading points and values of the minimum number of unloaded cars for stone removal were suitable to ensure its necessary daily capacity. The last part of this research was expanding the original model with an additional loading point. Several experiments were performed on this model. The aim of these experiments was to verify the combinations of loading points presented in the proposed model and the combinations of unsatisfactory loading points. Based on the research results, the transport planning model and simulation models are suitable additional tools for the decision-making process in removing quarry stone. Full article

Selecting the best projects and programs is of paramount importance to the success of organizations in the construction industry for the employer, clients, and developers. The existing selection criteria in the literature are tailored toward traditional construction projects. However, with the current move toward sustainable construction, there is a need to incorporate sustainability-specific criteria in the process portfolio selection. This study aims to identify and evaluate the sustainability-specific project selection criteria for construction organizations from the client’s perspective; this research topic is significant because developers/clients do not always consider sustainability criteria when selecting their portfolio of projects. The research methodology of this study consists of a literature review, identifying the sustainability criteria into an integrated list, and a survey to weight and rank the criteria. Sixteen criteria were identified through an extensive review of the related literature. These criteria were categorized based on three sustainability pillars: environmental, social, and economic. The environmental pillar includes six selection criteria, which are energy use, material use, water use, land use, pollution, and waste management. The social pillar consists of five selection criteria, which include health and safety, employee training and education, improvement in infrastructure, relation with local communities, and alternative transportation. The economic pillar consists of five selection criteria, which include life cycle cost, contribution to GDP, employment creation, innovation and technology, and use of national suppliers. A survey was developed and circulated to specialists in the construction industry in the United Arab Emirates (UAE). The weights for the sustainability selection criteria were assessed by using the Analytic Hierarchy Process (AHP) method. The results show that the environmental group is the most important group among the pillars of sustainability, with a weight of 0.520, compared with the social and the economic pillars, which had weights of 0.214 and 0.266, respectively. Full article

Background: Standard oblique cages cannot cover endplates side-to-side, which is an important biomechanical factor for reducing the risk of cage subsidence and for restoring correct segmental lordosis. The aim of this study is to evaluate the radiological and clinical results of a new oblique lumbar interbody fusion (OLIF) axially expandable cage. Methods: This is a prospective observational case–control study. From March 2018 to June 2020, 28 consecutive patients with lumbar degenerative disease underwent an ATP approach, with the insertion of a new axially expandable cage, which was used as a stand-alone procedure or followed by posterior percutaneous pedicle fixation. Results: Twenty-eight patients in both groups met the inclusion criteria. The mean follow-up time was 31.2 months (range of 13–37). The clinical results were not significantly different, although in the control group, two major intraoperative complications were recorded, and slight improvements in ODI and SF-36 scores were observed in the study group. The radiological results showed a less frequent incidence of subsidence and a higher rate of fusion in the study group compared to controls. Conclusions: The axially expandable oblique cage for lumbar inter body fusion, specifically designed for the ATP approach, represents an innovation and a technical improvement. The insertion and the axial expansion technique are safe and easy. The large footprint could obtain solid and effective arthrodesis, potentially reducing the risk of subsidence. Full article

The arbovirus West Nile virus (WNV) is a danger to global health. Spread primarily by mosquitoes, WNV causes about 2000 cases per year in the United States. The natural mosquito immune response controls viral replication so that the host survives but can still transmit the virus. Using the genetically malleable Drosophila melanogaster model, we previously dissected innate immune pathways used to control WNV infection. Specifically, we showed that insulin/IGF-1 signaling (IIS) activates a JAK/STAT-mediated immune response that reduces WNV. However, how factors that regulate IIS in insects control infection has not been identified. D. melanogaster Limostatin (Lst) encodes a peptide hormone that suppresses insulin secretion. Its mammalian ortholog, Neuromedin U (NMU), is a peptide that regulates the production and secretion of insulin from pancreatic beta cells. In this study, we used D. melanogaster and human cell culture models to investigate the roles of these insulin regulators in immune signaling. We found that D. melanogaster Lst mutants, which have elevated insulin-like peptide expression, are less susceptible to WNV infection. Increased levels of insulin-like peptides in these flies result in upregulated JAK/STAT activity, leading to protection from infection. Treatment of human cells with the insulin regulator NMU results in increased WNV replication. Further investigation of methods to target Lst in mosquitoes or NMU in mammals can improve vector control methods and may lead to improved therapeutics for human and animal infection. Full article

Kinematic calibration plays a pivotal role in enhancing the absolute positioning accuracy of industrial robots, with parameter identification and error compensation constituting its core components. While the conventional parameter identification method, based on linearization, has shown promise, it suffers from the loss of high-order system information. To address this issue, we propose an unscented Kalman filter (UKF) with adaptive process noise covariance for robot kinematic parameter identification. The kinematic model of a typical 6-degree-of-freedom industrial robot is established. The UKF is introduced to identify the unknown constant parameters within this model. To mitigate the reliance of the UKF on the process noise covariance, an adaptive process noise covariance strategy is proposed to adjust and correct this covariance. The effectiveness of the proposed algorithm is then demonstrated through identification and error compensation experiments for the industrial robot. Results indicate its superior stability and accuracy across various initial conditions. Compared to the conventional UKF algorithm, the proposed approach enhances the robot’s accuracy stability by 25% under differing initial conditions. Moreover, compared to alternative methods such as the extended Kalman algorithm, particle swarm optimization algorithm, and grey wolf algorithm, the proposed approach yields average improvements of 4.13%, 26.47%, and 41.59%, respectively. Full article

Blood–brain barrier (BBB) dysfunction is a key feature in neuroimmunological and neurodegenerative diseases. In this study, we developed a microfluidic human BBB-on-a-chip to model barrier dysfunction and immune cell migration using immortalized TY10 brain endothelial cells, pericytes, and astrocytes. It was found that immortalized TY10 brain endothelial cells developed a microvascular structure under flow. Pericytes were localized on the basal side surrounding the TY10 microvascular structure, showing an in vivo-like structure. Barrier integrity increased under co-culture with pericytes. In addition, both ethylenediaminetetraacetic acid (EDTA) and anti-Claudin-5 (CLDN5) neutralizing antibody caused a decrease in the transendothelial electrical resistance (TEER). EDTA caused the leakage of 20 kDa dextran, suggesting different effects on the BBB based on the mechanism of action, whereas anti-CLDN5 antibody did not cause leakage. In the tri-culture model, human T cells migrated through endothelial vessels towards basal C-X-C motif chemokine ligand 12 (CXCL12). The live-imaging analysis confirmed the extravasation of fluorescence-labelled T cells in a CXCL12-concentration- and time-dependent manner. Our BBB model had an in vivo-like structure and successfully represented barrier dysfunction and transendothelial T cell migration. In addition, our study suggests that the inhibition of CLDN5 attenuates the BBB in humans. This platform has various potential uses in relation to the BBB in both drug discovery research and in elucidating the mechanisms of central nervous system diseases. Full article

Fusarium wilt of banana (FWB) is the most limiting disease in this crop. The phytosanitary emergency caused by FWB since 2019 in Colombia has required the development of ecofriendly control methods. The aim of this study was to test the effectiveness of microbial-based biofungicides against FWB caused by Fusarium oxysporum f. sp. cubense race 1 (Foc R1) and correlate such effect with plant physiological parameters. Five Trichoderma (T1 to T4 and T9) and four Bacillus (T5 to T8)-based biofungicides were evaluated in pot experiments. In vitro, dual confrontation tests were also carried out to test whether the in vitro effects on Foc growth were consistent with the in vivo effects. While Trichoderma-based T3, T4, and T9, and Bacillus-based T8, significantly reduced the growth of Foc R1 in vitro, Trichoderma-based T1, T3, T4, and T9 temporarily reduced the Foc population in the soil. However, the incidence progress of FWB was significantly reduced by Bacterial-based T7 (74% efficacy) and Trichoderma-based T2 (50% efficacy). The molecular analysis showed that T7 prevented the inner tissue colonization by Foc R1 in 80% of inoculated plants. The T2, T4, T7, and T9 treatments mitigated the negative effects caused by Foc R1 on plant physiology and growth. Our data allowed us to identify three promising treatments to control FWB, reducing the progress of the disease, delaying the colonization of inner tissue, and mitigating physiological damages. Further studies should be addressed to determine the modes of action of the biocontrol agents against Foc and validate the utilization in the field. Full article

The main goal of this study was to assess the bioactive and polysaccharide compositions, along with the antioxidant and antibacterial potentials, of five seaweeds collected from the northeastern coast of Algeria. Through Fourier transform infrared spectroscopy analysis and X-ray fluorescence spectroscopy, the study investigated the elemental composition of these seaweeds and their chemical structure. In addition, this study compared and identified the biochemical makeup of the collected seaweed by using cutting-edge methods like tandem mass spectrometry and ultra-high-performance liquid chromatography, and it searched for new sources of nutritionally valuable compounds. According to the study’s findings, Sargassum muticum contains the highest levels of extractable bioactive compounds, showing a phenolic compound content of 235.67 ± 1.13 µg GAE·mg⁻¹ and a total sugar content of 46.43 ± 0.12% DW. Both S. muticum and Dictyota dichotoma have high concentrations of good polyphenols, such as vanillin and chrysin. Another characteristic that sets brown algae apart is their composition. It showed that Cladophora laetevirens has an extracted bioactive compound content of 12.07% and a high capacity to scavenge ABTS⁺ radicals with a value of 78.65 ± 0.96 µg·mL⁻¹, indicating high antioxidant activity. In terms of antibacterial activity, S. muticum seaweed showed excellent growth inhibition. In conclusion, all five species of seaweed under investigation exhibited unique strengths, highlighting the variety of advantageous characteristics of these seaweeds, especially S. muticum. Full article

The majority of observations and criteria related to brain injuries predominantly focus on acceleration and forces, leaving the understanding of the brain in the frequency domain relatively limited. The impact of an injury can be more profound when considering the brain’s resonant frequencies in conjunction with external applied loading and motion. This paper employs a finite element method to conduct an analysis of a human brain under impacts from various angles on the human head. A numerical technique, specifically dynamic mode decomposition (DMD), is utilized to extract modal properties for brain tissue in regions proximate to the corpus callosum and brain stem. Three distinct modal frequencies have been identified, spanning the ranges of 44–68 Hz, 68–155 Hz, and 114–299 Hz. The findings underscore the significance of impact angle, displacement direction, and the specific region of the brain in influencing the modal response of brain tissue during an impact event. Full article

The present review highlights the potential of insect-based proteins to address the growing need for sustainable and secure food systems. The key findings suggest that edible insects offer a viable and environmentally friendly alternative to traditional livestock, requiring significantly less land, water, and feed while emitting lower levels of greenhouse gases. Insect farming can also reduce waste and recycle nutrients, supporting circular economy models. Nutritionally, insects provide high-quality protein, essential amino acids, and beneficial fats, making them valuable to human diets. Despite these benefits, this review emphasizes the need for comprehensive regulatory frameworks to ensure food safety, manage potential allergenicity, and mitigate contamination risks from pathogens and environmental toxins. Additionally, developing innovative processing technologies can enhance the palatability and marketability of insect-based products, promoting consumer acceptance. This review concludes that with appropriate regulatory support and technological advancements, insect-based proteins have the potential to significantly contribute to global food security and sustainability efforts. Full article

In this study, our research aim was to assess the influence of pumpkin seed flour addition on the antioxidant properties, consumer acceptability, functional properties, and texture of wafers. The in vitro gastrointestinal digestion process was used to assess the effectiveness of fortification in terms of the potential bioavailability of phenolic compounds and peptides. The antioxidant activity of the obtained hydrolysates and potentially bioavailable fractions (≤3.5 kDa) was tested. The highest antiradical activity and Fe²⁺ chelation ability (IC₅₀) were noted for the fraction obtained from wafers with the greatest addition of pumpkin seed flour—Pf4 (0.49 mg/mL for ABTS⁺*, 3.84 mg/mL for DPPH*, and 2.04 mg/mL for Fe²⁺ chelation). The addition of pumpkin seed flour caused the color of the wafers to change to a darker one (24.46% differences in L* between C and P4), which influenced consumer ratings. This study shows that adding pumpkin seed flour increases the peptide and phenolic contents of wafers (1.13 mg/mL and 1.01 mg/mL of peptides and 0.429 mg/mL and 0.351 mg/mL of phenolics for P4 and C hydrolysates, respectively) and enhances their antioxidant activity, with only minimal effects on taste, aroma, crispness, water and fat adsorption capacity, and foaming ability. Fractions ≤3.5 kDa showed greater antioxidative activity than hydrolysates, and the addition of pumpkin seed flour improved these properties. To sum up, pumpkin seeds are a valuable source of antioxidant compounds (phenolic compounds and peptides) and can be used to enrich various products. Full article

The mining industry generates vast quantities of mine tailings on an annual basis. However, due to their limited economic value, a significant portion of these tailings are deposited close to mining sites, often underwater. The principal environmental apprehensions associated with mine tailings revolve around their elevated levels of heavy metals and sulfidic minerals. The oxidation of these sulfidic minerals can lead to the formation of acid mine drainage, which in turn releases heavy metals into nearby water systems. The effective management of tailing dams requires substantial financial investments for their construction and meticulous control. Consequently, a pressing need exists for stable, sustainable, and economically viable management approaches. One promising method for addressing mine tailings is through alkali activation, a technique that serves as a stabilization process. This approach yields robust, concrete-like structures by utilizing raw materials abundant in aluminum and silicon, which conveniently constitute the primary components of mining residues. This comprehensive review outlines the research on utilizing alkali activation for mine tailings. It delves into the reactivity and chemical attributes of diverse minerals. Numerous mine tailings exhibit an inadequate level of reactivity under alkaline conditions, so various pre-treatment methodologies and their impacts on mineralogy are meticulously explored. Full article

We have designed cell-penetrating peptides that target the leucine zipper transcription factors ATF5, CEBPB and CEBPD and that promote apoptotic death of a wide range of cancer cell types, but not normal cells, in vitro and in vivo. Though such peptides have the potential for clinical application, their mechanisms of action are not fully understood. Here, we show that one such peptide, Dpep, compromises glucose uptake and glycolysis in a cell context-dependent manner (in about two-thirds of cancer lines assessed). These actions are dependent on induction of tumor suppressor TXNIP (thioredoxin-interacting protein) mRNA and protein. Knockdown studies show that TXNIP significantly contributes to apoptotic death in those cancer cells in which it is induced by Dpep. The metabolic actions of Dpep on glycolysis led us to explore combinations of Dpep with clinically approved drugs metformin and atovaquone that inhibit oxidative phosphorylation and that are in trials for cancer treatment. Dpep showed additive to synergistic activities in all lines tested. In summary, we find that Dpep induces TXNIP in a cell context-dependent manner that in turn suppresses glucose uptake and glycolysis and contributes to apoptotic death of a range of cancer cells. Full article

Regenerative endodontics is a developing field involving the restoration of tooth structure and re-vitality of necrotic pulp. One of the most critical clinical considerations for regenerative endodontic procedures is the disinfection of the root canal system, since infection interferes with regeneration, repair, and stem cell activity. In this study, we aimed to provide the synthesis of injectable biopolymeric tissue scaffolds that can be used in routine clinical and regenerative endodontic treatment procedures using Gelatin methacryloyl (GelMA), and to test the antimicrobial efficacy of Gelatin methacryloyl/Silver nanoparticles (GelMA/AgNP), Gelatin methacryloyl/Hyaluronic acid (GelMA/HYA), and Gelatin methacryloyl/hydroxyapatite (GelMA/HA) composite hydrogels against microorganisms that are often encountered in stubborn infections in endodontic microbiology. Injectable biocomposite hydrogels exhibiting effective antimicrobial activity and non-cytotoxic behavior were successfully synthesized. This is also promising for clinical applications of regenerative endodontic procedures with hydrogels, which are proposed based on the collected data. The GelMA hydrogel loaded with hyaluronic acid showed the highest efficacy against Enterococcus faecalis, one of the stubborn bacteria in the root canal. The GelMA hydrogel loaded with hydroxyapatite also showed a significant effect against Candida albicans, which is another bacteria responsible for stubborn infections in the root canal. Full article

The main topics of the presented papers focus on various aspects of maritime operations and security, including anomaly detection in maritime traffic, collision risk assessment, and the use of Automatic Identification System (AIS) data for enhancing maritime safety and surveillance. These papers cover a wide range of subjects within the maritime domain, such as trajectory clustering, kinematic behaviour analysis, Bayesian networks for risk assessment, resilience analysis of shipping networks, and the development of novel methods for detecting abnormal maritime behaviour. The emphasis is on using data-driven approaches, statistical methodologies, and advanced technologies to improve maritime operations and security. Full article