ALBERT

Description: The Tonga-Kermadec forearc is deforming in response to on-going subduction of the Pacific Plate beneath the Indo-Australian Plate. Previous research has focussed on the structural development of the forearc where large bathymetric features such as the Hikurangi Plateau and Louisville Ridge seamount chain are being subducted. Consequently, knowledge of the ‘background’ forearc in regions of normal plate convergence is limited. We report on an ~250-km-long multichannel seismic reflection profile that was shot perpendicular to the Tonga-Kermadec trench at ~28°S to determine the lateral and temporal variations in the structure, stratigraphy and deformation of the Kermadec forearc resulting solely from Pacific Plate subduction. Interpretation of the seismic profile, in conjunction with regional swath bathymetry data, shows that the Pacific Plate exhibits horst and graben structures that accommodate bending-induced extensional stresses, generated as the trenchward dip of the crust increases. Trench infill is also much thicker than expected at 1 km which, we propose, results from increased sediment flux into and along the trench. Pervasive normal faulting of the mid-trench slope most likely accommodates the majority of the observed forearc extension in response to basal subduction erosion, and a structural high is located between the mid- and upper-trench slopes. We interpret this high as representing a dense and most likely structurally robust region of crust lying beneath this region. Sediment of the upper-trench slope documents depositional hiatuses and on-going uplift of the arc. Strong along-arc currents appear to erode the Kermadec volcanic arc and distribute this sediment to the surrounding basins, while currents over the forearc redistribute deposits as sediment waves. Minor uplift of the transitional Kermadec forearc, observed just to the north of the profile, appears to relate to an underlying structural trend as well as subduction of the Louisville Ridge seamount chain 250 km to the north. Relative uplift of the Kermadec arc is observed from changes in the tilt of upper-trench slope deposits and extensional faulting of the basement immediately surrounding the Louisville Ridge.

Description: SUMMARY The Swan Islands Transform Fault (SITF) marks the southern boundary of the Cayman Trough and the ocean–continent transition of the North American–Caribbean Plate boundary offshore Honduras. The CAYSEIS experiment acquired a 180-km-long seismic refraction and gravity profile across this transform margin, ∼70 km to the west of the Mid-Cayman Spreading Centre (MCSC). This profile shows the crustal structure across a transform fault system that juxtaposes Mesozoic-age continental crust to the south against the ∼10-Myr-old ultraslow spread oceanic crust to the north. Ocean-bottom seismographs were deployed along-profile, and inverse and forward traveltime modelling, supported by gravity analysis, reveals ∼23-km-thick continental crust that has been thinned over a distance of ∼70 km to ∼10 km-thick at the SITF, juxtaposed against ∼4-km-thick oceanic crust. This thinning is primarily accommodated within the lower crust. Since Moho reflections are not widely observed, the 7.0 km s−1 velocity contour is used to define the Moho along-profile. The apparent lack of reflections to the north of the SITF suggests that the Moho is more likely a transition zone between crust and mantle. Where the profile traverses bathymetric highs in the off-axis oceanic crust, higher P-wave velocity is observed at shallow crustal depths. S-wave arrival modelling also reveals elevated velocities at shallow depths, except for crust adjacent to the SITF that would have occupied the inside corner high of the ridge-transform intersection when on axis. We use a Vp/Vs ratio of 1.9 to mark where lithologies of the lower crust and uppermost mantle may be exhumed, and also to locate the upper-to-lower crustal transition, identify relict oceanic core complexes and regions of magmatically formed crust. An elevated Vp/Vs ratio suggests not only that serpentinized peridotite may be exposed at the seafloor in places, but also that seawater has been able to flow deep into the crust and upper mantle over 20–30-km-wide regions which may explain the lack of a distinct Moho. The SITF has higher velocities at shallower depths than observed in the oceanic crust to the north and, at the seabed, it is a relatively wide feature. However, the velocity–depth model subseabed suggests a fault zone no wider than ∼5–10 km, that is mirrored by a narrow seabed depression ∼7500 m deep. Gravity modelling shows that the SITF is also underlain, at 〉2 km subseabed, by a ∼20-km-wide region of density 〉3000 kg m−3 that may reflect a broad region of metamorphism. The residual mantle Bouguer anomaly across the survey region, when compared with the bathymetry, suggests that the transform may also have a component of left-lateral trans-tensional displacement that accounts for its apparently broad seabed appearance, and that the focus of magma supply may currently be displaced to the north of the MCSC segment centre. Our results suggest that Swan Islands margin development caused thinning of the adjacent continental crust, and that the adjacent oceanic crust formed in a cool ridge setting, either as a result of reduced mantle upwelling and/or due to fracture enhanced fluid flow.

Description: A region of oceanic core complexes (OCCs) exists at 13°N on the Mid-Atlantic Ridge that is regarded as a type site. This site includes two OCCs at 13°20′N and 13°30′N, thought to be in the active and dying stages of evolution, and two together called the Ashadze Complex (centred at 13°05′N) that are considered to be relict. Here we describe the results of S-wave seismic modelling along an ∼200-km-long 2-D transect traversing, south-to-north, through both the Mercurius and Marathon fracture zones, the southern outside corner of the 13°N segment, the OCCs, the ridge axis deviation in trend centred at 13°35′N, and the youngest oceanic crust of the eastern ridge flank to the north. Our inversion model, and the corresponding Vp/Vs ratio, show that the majority of the crust beneath the 13°30′N OCC comprises metamorphosed lithologies that have been exhumed to the shallowest subseabed level, while basaltic lithologies underlie the 13°20′N OCC. The transition between these contrasting crustal structures occurs over a distance of 〈5 km, and extends to at least ∼2 km depth below seafloor. The northern and southern OCCs of the Ashadze Complex have contrasting structures at shallow depth, with the northern OCC having a faster S-wave velocity in the upper crust. A Vp/Vs ratio of >1.9 (and equivalent Poisson's ratio of >0.3) indicates exhumed and/or metamorphosed lithologies beneath the bathymetric depression between them and within the crust beneath the southern OCC. Between the northern and southern flanks of the Marathon fracture zone and northern flank of Mercurius fracture zone, the lower crust has a relatively low Vp/Vs ratio suggesting that the deformation associated with Marathon fracture zone, which facilitates fluid ingress, extends laterally within the lower crust. Marathon fracture zone itself is underlain by a broad zone of low S-wave velocity (∼2.0 km s−1) up to ∼20 km wide from the seabed to at least the mid-crust, that is mirrored in a high Vp/Vs ratio and lower density, particularly deeper than ∼1 km below seabed within its bathymetric footprint. Volcanic domains are highlighted by a low Vp/Vs ratio of 〈1.6 (and equivalent Poisson's ratio of 〈0.15). Our combined seismic and density models favour the localized model of OCC evolution. They also show a considerable ridge-parallel variability in the amount and distribution of magmatic versus metamorphosed crust. Our results suggest that the current focus of magmatism lies to the north of the 13°20′N OCC, where the magmatic accretion-type seabed morphology observed is mirrored in the pattern of microseismicity, suggesting that its inward-facing median-valley-wall fault may link to the 13°20′N OCC detachment surface. Magmatism and active faulting behind (to the west) the footwall breakaway of the 13°30′N OCC, and the microseismicity concentrated in a band along its southern flank, suggest a readjustment of ridge geometry along axis is underway. As part of this, a transform offset is forming that will ultimately accommodate the 13°30′N OCC in its inside corner on the eastern flank of the ridge axis to the north.

Description: The Mid-Atlantic Ridge at 13°N is regarded as a type locality for oceanic core complexes (OCCs), as it contains, within ∼70 km along the spreading axis, four that are at different stages of their life cycle. The wealth of existing seabed observations and sampling makes this an ideal target to resolve contradictions between the existing models of OCC development. Here we describe the results of P-wave seismic tomographic modelling within a 60 × 60 km footprint, containing several OCCs, the ridge axis and both flanks, which determines OCC crustal structure, detachment geometry and OCC interconnectivity along axis. A grid of wide-angle seismic refraction data was acquired along a series of 17 transects within which a network of 46 ocean-bottom seismographs was deployed. Approximately 130 000 first arrival traveltimes, together with sparse Moho reflections, have been modelled, constraining the crust and uppermost mantle to a depth of ∼10 km below sea level. Depth slices through this 3-D model reveal several independent structures each with a higher P-wave velocity (Vp) than its surrounds. At the seafloor, these features correspond to the OCCs adjacent to the axial valley walls at 13°20′N and 13°30′N, and off axis at 13°25′N. These high-Vp features display dipping trends into the deeper crust, consistent with the surface expression of each OCC's detachment, implying that rocks of the mid-to-lower crust and uppermost mantle within the footwall are juxtaposed against lower Vp material in the hangingwall. The neovolcanic zone of the ridge axis has systematically lower Vp than the surrounding crust at all depths, and is wider between OCCs. On average, throughout the 13°N region, the crust is ∼6 km-thick. However, beneath a deep lava-floored basin between axial OCCs the crust is thinner and is more characteristically oceanic in layering and velocity–depth structure. Thicker crust at the ridge axis suggests a more magmatic phase of current crustal formation, while modelling of the sparse Moho reflections suggests the crust–mantle boundary is a transition zone throughout most of the 13°N segment. Our results support a model in which OCCs are bounded by independent detachment faults whose dip increases with depth and is variable with azimuth around each OCC, suggesting a geometry and mechanism of faulting that is more complicated than previously thought. The steepness of the northern flank of the 13°20′N detachment suggests that it represents a transfer zone between different faulting regimes to the south and north. We propose that individual detachments may not be linked along-axis, and that OCCs act as transfer zones linking areas of normal spreading and detachment faulting. Along ridge variation in magma supply influences the nature of this detachment faulting. Consequently, not only does magma supply control how detachments rotate and migrate off axis before finally becoming inactive, but also how, when and where new OCCs are created.

Description: Summary The seismic velocity of the oceanic crust is a function of its physical properties that include its lithology, degree of alteration, and porosity. Variations in these properties are particularly significant in young crust, but also occur with age as it evolves through hydrothermal circulation and is progressively covered with sediment. While such variation may be investigated through P-wave velocity alone, joint analysis with S-wave velocity allows the determination of Poisson's ratio, which provides a more robust insight into the nature of change in these properties. Here we describe the independent modelling of P- and S-wave seismic datasets, acquired along an ∼330 km-long profile traversing new to ∼8 Myr-old oceanic crust formed at the intermediate-spreading Costa Rica Rift (CRR). Despite S-wave data coverage being almost four-times lower than that of the P-wave dataset, both velocity models demonstrate correlations in local variability and a long-wavelength increase in velocity with distance, and thus age, from the ridge axis of up to 0.8 and 0.6 km s−1, respectively. Using the Vp and Vs models to calculate Poisson's ratio (σ), it reveals a typical structure for young oceanic crust, with generally high values in the uppermost crust that decrease to a minimum of 0.24 by 1.0–1.5 km sub-basement, before increasing again throughout the lower crust. The observed upper crustal decrease in σ most likely results from sealing of fractures, which is supported by observations of a significant decrease in porosity with depth (from ∼15 to 

Description: The Tonga-Kermadec forearc is deforming in response to on-going subduction of the Pacific Plate beneath the Indo-Australian Plate. Previous research has focussed on the structural development of the forearc where large bathymetric features such as the Hikurangi Plateau and Louisville Ridge seamount chain are being subducted. Consequently, knowledge of the ‘background’ forearc in regions of normal plate convergence is limited. We report on an ∼250-km-long multichannel seismic reflection profile that was shot perpendicular to the Tonga-Kermadec trench at ∼28°S to determine the lateral and temporal variations in the structure, stratigraphy and deformation of the Kermadec forearc resulting solely from Pacific Plate subduction. Interpretation of the seismic profile, in conjunction with regional swath bathymetry data, shows that the Pacific Plate exhibits horst and graben structures that accommodate bending-induced extensional stresses, generated as the trenchward dip of the crust increases. Trench infill is also much thicker than expected at 1 km which, we propose, results from increased sediment flux into and along the trench. Pervasive normal faulting of the mid-trench slope most likely accommodates the majority of the observed forearc extension in response to basal subduction erosion, and a structural high is located between the mid- and upper-trench slopes. We interpret this high as representing a dense and most likely structurally robust region of crust lying beneath this region. Sediment of the upper-trench slope documents depositional hiatuses and on-going uplift of the arc. Strong along-arc currents appear to erode the Kermadec volcanic arc and distribute this sediment to the surrounding basins, while currents over the forearc redistribute deposits as sediment waves. Minor uplift of the transitional Kermadec forearc, observed just to the north of the profile, appears to relate to an underlying structural trend as well as subduction of the Louisville Ridge seamount chain 250 km to the north. Relative uplift of the Kermadec arc is observed from changes in the tilt of upper-trench slope deposits and extensional faulting of the basement immediately surrounding the Louisville Ridge.