ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
Influence of thiourea and its derivatives as pickling inhibitors on hydrogen pickup, degree of inhibition and fatigue load of carbon steel during pickling in acidsThe influence of additions of thiourea (TU), N-methyl-TU, N, N′-tetramethyl-TU, N-phenyl-TU, N, N′-diethyl-TU and N, N′-diphenyl-TU upon the acid pickling of mild steel (1,0 M H2SO4 at 50° C) was investigated. Measured were inhibitor efficiency, uptake of hydrogen and alternating bending strength of the samples as functions of inhibitor type and inhibitor concentration. With all inhibitors a maximum of inhibitor efficiency and alternating bending strength and a minimum of hydrogen uptake was found in the same inhibitor concentration range of about 0,001 M. Compared to pickling in pure sulfuric acid at this optimum concentration the inhibitor efficiency is between 95,2 and 98,4%, the decrease of the hydrogen uptake between 8,6 and 63,3% and the increase of the alternating bending strength between 20,0 and 43,4%, depending upon the kind of inhibitor. The alternating bending strength increases roughly linearly with decreasing hydrogen content of the samples. In the optimum concentration range the inhibitor efficiency and the alternating bending strength increase, the hydrogen uptake decreases roughly linearly with increasing adsorption area or increasíng molecular weight of the inhibitors.
Notes:
Es wurde der Einfluß von Thioharnstoff (TH), N-Methyl-TH, N, N′-Tetramethyl-TH, N-Monophenyl-TH, N, N'-Diäthyl-TH und N, N′-Dipenyl-TH auf die Schwefelsäurebeizung von Weichstahl (1,0 M H2SO4 bei 50° C, Beizdauer 2 h) untersucht. Gemessen wurden die Inhibitorwirksamkeit (prozentuelle Verminderung der Eisenauflösung), die Wasserstoffaufnahme und die Wechselbiegefestigkeit der Proben in Abhängigkeit von Art und Konzentration der Inhibitoren. Bei allen Verbindungen zeigt sich ein Maximum der Inhibitorwirkung bei einer Konzentration von 0,001 M; bei derselben Inhibitorkonzentration wird auch ein Minimum der Wasserstoffaufnahme und ein Maximum der Wechselbiegefestigkeit festgestellt. Bei dieser optimalen Inhibitorkonzentration beträgt je nach Inhibitor die prozentuelle Verminderung der eisenauflösung 95,2 bis 98,4%, die Verminderung der Wasserstoffaufnahme 8,6 bis 63,3% und die Erhöhung der Wechselbiegefestigkeit 20,0 bis 43,4%, verglichen mit der Beizung in nicht inhibierter Säure. Die Biegezahl bis zum Bruch nimmt etwa linear mit dem Wasserstoffgehalt ab. Im optimalen Konzentrationsbereich der Inhibitoren wird eine in erster Näherung lineare Zunahme der Inhibitorwirksamkeit und der Wechselbiegefestigkeit bzw. eine Abnahme des Wasserstoffgehaltes mit zunehmender Größe der Inhibitormoleküle (gemessen am relativen Flächenbedarf bei der Adsorption oder nach dem Molekulargewicht) festgestellt.
Additional Material:
7 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19800310807
Permalink