ALBERT

Notizen: Abstract A submarine sediment instability event (landslide) occurred at Kitimat, British Columbia, in 1975. Recent high-resolution surveys provide details of the resulting seafloor morphology. The effects of the slide include modification of the fjord head delta-front slopes, transport of delta sediments into deep water and mixing with deep water, fjord bottom clays. Distinctive features include the results of shallow rotational sliding, tearing and shearing, compressional folding and long distance block gliding at the downslope slide terminus.

Notizen: Abstract A high-resolution acoustic survey over a fjord side fan delta revealed distinctive bottom features resulting from slope instability processes. Delta-front chutes occurring on slopes of l3° are partially filled with radiating splays of coarse-grained sediment, apparently transported downslope by coarse-grained debris flows that originated on the subaerial slopes above the fan. Arcuate scarp patterns represent shallow successive, rotational slides, with numcrous small displacements of individual blocks and slabs of sediment. Blocky, ridged depositional areas occur at the base of the fan delta, but there is no evidence of long-distance mass movement farther downfjord.

Notizen: The submarine morphology, sediments, and three-dimensional geometry of a developing fan delta are described using data from acoustic surveys, bottom sampling, and observations from a manned submersible. The fan system is being built in a British Columbian fjord (water depth 410 m) supplied with coarse-grained sediments from a fjord-side river.Construction of the subaqueous fan began about 10–12,000 yr BP and is ongoing. The system is analogous to part of one fault-uplift sedimentation cycle in ancient fan deltas. Initially, when offshore relief was at a maximum, acoustically chaotic sediment wedges were emplaced over fjord-bottom glaciomarine deposits. Subsequent aggradation/progradation resulted in moderately dipping sequences interrupted by local chaotic units. The present fan surface (average slope 13°) is divided into six zones arranged concentrically from the fan apex, on the basis of form, sediment and process interpretations. Continued subaqueous fan growth results from settling of river-derived sediments from suspension and downslope sediment dispersal by episodic gravity flows, apparently fed by underflows from the river.

Notizen: Bute Inlet, a fiord along the southwestern coast of British Columbia, Canada, includes a sea-floor sedimentation system 70 km in length which resembles those developed on some large submarine fans. Turbidity currents originate at the head of the flord on the submerged delta fronts of the Homathko and Southgate rivers. They move downslope for about 30 km within a single large incised channel, spill onto a depositional area termed the channel lobe complex, and finally spread out over a low-relief distal splay area that passes 55 km downslope into a flat basin floor.During the present study, turbidity currents in Bute Inlet were studied using sea-floor morphology, bottom sediment distribution, and in-situ instrument packages. The mean velocities of the most recent flows, estimated from surface sediment grain size, has varied between 100–120 cm s–1 in the incised channel, 20–50 cms–1 in the channel lobe complex, and 〈 5 cm s–1 on the basin floor. Velocities based on channel morphology are poorly constrained but are in the range of 160-425 cm s–1 in the upper part of the incised channel and 66 cm s–1 in the lower channel. Calculated flow densities range from 1.049 to 1.028g cm–3.Turbidity flows monitored in 1986 using submerged instrument packages exceeded 32 m in thickness in the upper part of the incised channel, where the maximum measured velocity was 330 cm s–1. At the head of the channel lobe complex the maximum velocity had declined to 75 cm s–1. The density of the monitored flows is estimated at 1.025-1.03g cm–3. The cored sediments and channel morphology yield estimates of mean flow velocities that are generally greater than those measured by the in-situ instrument packages and estimated from modern surface sediments. The former suggest past flow velocities up to 500 cm s–1 in the incised channel, about 20 cm s–1 in spillover deposits along the lower part of the incised channel, and 100-140 cm s–1 in the distal splay. The contrast between the velocities of modern and past flows suggests that past flows may have been considerably larger and more energetic than those presently occurring in Bute Inlet.The size properties of sediments in the monitored turbidity flows suggest a strong vertical size gradient in the suspended load during transport. The surface and cored sediments fine downslope from the channel lobe complex to distal splay area. Distinctive sedimentary sequences are recognized in cores from the spillover lobes, channel lobe complex, distal splay, and basin floor depositional areas. Many individual turbidites grade downslope from massive Ta divisions in the channel lobe complex and probably in the incised channel to Ta divisions overlain by slurried divisions on the distal splay and largely slurried beds on the basin floor. These facies suggest that individual currents commonly evolve from largely cohesionless suspensions in the incised channel and channel lobe complex to dilute cohesive slurries downslope on the distal splay and basin floor. Many flows in Bute Inlet fail to develop a traction state of sedimentation and the resulting turbidites lack well-developed Tb. Tc, and Td divisions.

Notizen: Abstract The frequency of turbidity currents in Bute Inlet and Knight Inlet (British Columbia, Canada) was monitored. A prototype instrument (turbidity event detector) was deployed adjacent to prominent incised sea-floor channels. Approximately 25–30 turbidity currents occur annually. They appear closely correlated to periods of higher river discharge into the heads of the fjords. Two peaks in both discharge and turbidity current fequency occur, one in response to snow melt in late June–early July, the other to glacier melt in August. Virtually no turbidity currents were observed in winter. River mouth bars, channel deposits, and other deltaic sediments build up during lower discharge periods and are swept onto the steep delta front and into subaqueous channels, along with bedload, during floods.

Notizen: Abstract In the deepest parts of Bute and Knight Inlets, British Columbia, unusual blocky mounds of sediment rise abruptly from the otherwise smooth sea floor. The mounds (up to 28 m high, 80 m wide, and 150 m long) display bioturbated surfaces with transverse fractures and elongate depressions. The origin of the mounds and sediment blocks, which contrast with the otherwise flat-lying fjord-bottom strata, remains unknown. Two mechanisms for their formation are considered: (1) subsidence associated with earthquake-induced liquefaction; and (2) uplift driven by the growth of localized gas hydrates in the near-surface sediments.