ISSN:
1059-910X
Schlagwort(e):
Oxide film
;
Barrier film
;
Ultramicrotomy
;
Life and Medical Sciences
;
Cell & Developmental Biology
Quelle:
Wiley InterScience Backfile Collection 1832-2000
Thema:
Allgemeine Naturwissenschaft
Notizen:
A recent advance in metallurgical technology has been the application of rapid solidification techniques to Al alloy production. FVS0812 is the designation given to a microcrystalline Al-based alloy consisting of 8 wt% Fe, 1 wt% V and 2 wt% Si. It is a two-phase alloy, consisting of ca. 27 vol percent of approximately spherical Fe-V-Si-rich dispersoids in an essentially pure Al matrix. The high strength, low density properties of this advanced material, and other related alloys, have not yet been realized, however, due, in part, to the inability of the alloy to form a thick, adherent, abrasion-resistant outer surface oxide film, a feature readily achieved at conventional Al alloys by normal anodizing methods. The present research has involved an electro-chemical study of oxide film growth at the 812 alloy, with the specific goals being to seek an understanding of the origin of the oxide film growth problem and ultimately to propose alternative approaches to the formation of a thick, stable oxide film at this material. The techniques used in this research have included electrochemical methodologies such as cyclic voltammetry and electrochemical impedance spectroscopy. Crucial information has been obtained through transmission electron microscopy (TEM) of ultramicrotomed specimens. Experiments were carried out initially in neutral borate solutions to characterize the compact barrier oxide film formed in this environment and expected to be present beneath the porous oxide film formed in the normal sulfuric acid anodizing medium. In borate solutions, the electrochemical results implied oxide film thicknesses which were less than seen subsequently by TEM work, suggesting either that the barrier film at the 812 alloy can be penetrated by solution in very fine pores (not resolvable by conventional TEM) at its outer surface or that dispersoids trapped in the oxide film cause differential oxide film thicknesses to develop across the alloy surface. In sulfuric acid solutions, dissolution of Fe and V occurs from the 812 alloy during anodization. Both impedance and TEM studies reveal the absence of a barrier film at the 812 alloy surface. Also, the thick oxide overlayer has a tortuous and more open pore structure than formed at Al and the oxide film is also substantially thinner than it should be. It is suggested that the absence of a barrier oxide film indicates that the sulfuric acid anodizing medium is too aggressive for oxide film formation at the 812 alloy, resulting in excessive dissolution and poor oxide film qualities. © 1995 Wiley-Liss, Inc.
Zusätzliches Material:
9 Ill.
Materialart:
Digitale Medien
URL:
http://dx.doi.org/10.1002/jemt.1070310405
Permalink
