ALBERT

Description: These data were derived from the original Digital Elevation Models (DEMs) produced by the Boreal Ecosystem-Atmosphere Study (BOREAS) Hydrology (HYD)-8 team. The original DEMs were in the Universal Transverse Mercator (UTM) projection, while this product is projected in the Albers Equal-Area Conic (AEAC) projection. The pixel size of the data is 100 meters, which is appropriate for the 1:50,000-scale contours from which the DEMs were made. The original data were compiled from information available in the 1970s and 1980s. This data set covers the two Modeling Sub-Areas (MSAs) that are contained within the Southern Study Area (SSA) and the Northern Study Area (NSA). The data are stored in binary, image format files. The DEM data over the NSA-MSA and SSA-MSA in the AEAC projection are available from the Earth Observing System Data and Information System (EOSDIS) Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC). The data files are available on a CD-ROM (see document number 20010000884).

Description: The BOREAS HYD-8 team focused on describing the scaling behavior of water and carbon flux processes at local and regional scales. These DEMs were produced from digitized contours at a cell resolution of 100 meters. Vector contours of the area were used as input to a software package that interpolates between contours to create a DEM representing the terrain surface. The vector contours had a contour interval of 25 feet. The data cover the BOREAS MSAs of the SSA and NSA and are given in a UTM map projection. Most of the elevation data from which the DEM was produced were collected in the 1970s or 1980s. The data are stored in binary, image format files. The data files are available on a CD-ROM (see document number 20010000884) or from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC).

Description: The Boreal Ecosystem-Atmosphere Study (BOREAS) Hydrology (HYD)-8 team made measurements of surface hydrological processes at the Southern Study Area (SSA) and Northern Study Area (NSA) Old Black Spruce (OBS) Tower Flux sites, supporting its research into point hydrological processes and the spatial variation of these processes. These data were collected during the 1994 and 1996 field campaigns. Data collected may be useful in characterizing canopy interception, drip, throughfall, moss interception, drainage, evaporation, and capacity during the growing season at daily temporal resolution. This particular data set contains the measurements of throughfall, which is the amount of precipitation that fell through the canopy. A nested spatial sampling plan was implemented to determine spatial variations of the measured hydrological processes and ultimately the impact of these variations on modeled carbon and water budgets. These data are stored in ASCII text files. The data files are available on a CD-ROM (see document number 20010000884) or from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC).

Description: Highlights • Hyperspectral technology was investigated to detect microplastic in soil rapidly. • Two color PE microplastics with particle size from 0.5 to 1 mm were studied. • Support vector machine showed the potential to monitor PE microplastics in soil. • Six kinds of household polymers were applied to validate the developed method. Abstract Hyperspectral imaging technology has been investigated as a possible way to detect microplastics contamination in soil directly and efficiently in this study. Hyperspectral images with wavelength range between 400 and 1000 nm were obtained from soil samples containing different materials including microplastics, fresh leaves, wilted leaves, rocks and dry branches. Supervised classification algorithms such as support vector machine (SVM), mahalanobis distance (MD) and maximum likelihood (ML) algorithms were used to identify microplastics from the other materials in hyperspectral images. To investigate the effect of particle size and color, white polyethylene (PE) and black PE particles extracted from soil with two different particle size ranges (1–5 mm and 0.5–1 mm) were studied in this work. The results showed that SVM was the most applicable method for detecting white PE in soil, with the precision of 84% and 77% for PE particles in size ranges of 1–5 mm and 0.5–1 mm respectively. The precision of black PE detection achieved by SVM were 58% and 76% for particles of 1–5 mm and 0.5–1 mm respectively. Six kinds of household polymers including drink bottle, bottle cap, rubber, packing bag, clothes hanger and plastic clip were used to validate the developed method, and the classification precision of polymers were obtained from 79% to 100% and 86%–99% for microplastics particle 1–5 mm and 0.5–1 mm respectively. The results indicate that hyperspectral imaging technology is a potential technique to determine and visualize the microplastics with particle size from 0.5 to 5 mm on soil surface directly.

Description: Microplastics (MPs) in aquatic organisms are raising increasing concerns regarding their potential damage to ecosystems. To date, Raman and Fourier transform infrared spectroscopy techniques have been widely used for detection of MPs in aquatic organisms, which requires complex protocols of tissue digestion and MP separation and are time- and reagentconsuming. This novel approach directly separates, identifies, and characterizes MPs from the hyperspectral image (HSI) of the intestinal tract content in combination with a support vector machine classification model, instead of using the real digestion/separation protocols. The procedures of HSI acquisition ( 1 min) and data analysis (5 min) can be completed within 6 min plus the sample preparation and drying time (30 min) where necessary. This method achieved a promising efficiency (recall 〉98.80%, precision 〉96.22%) for identifying five types of MPs (particles 〉0.2 mm). Moreover, the method was also demonstrated to be effective on field fish from three marine fish species, revealing satisfying detection accuracy (particles 〉0.2 mm) comparable to Raman analysis. The present technique omits the digestion protocol (reagent free), thereby significantly reducing reagent consumption, saving time, and providing a rapid and efficient method for MP analysis.