ALBERT

Description: A wind-tunnel simulation of the diffusion patterns in a sea breeze has been attempted. No attempt was made to reproduce the recirculation that characterizes a sea breeze, but the results indicate that the low-level onshore flow was well simulated for neutral, stable, unstable, and elevated inversion conditions. Velocity, turbulence, shear stress, and temperature data were taken, and the spread of emissions from ground-level sources was investigated. Comparison is made with theoretical predictions by Inoue (1960) and with the open, countryside results of Pasquill. Agreement with the predictions by Inoue is good. The comparison with Pasquill's results shows that the wind-tunnel flows are shifted two categories towards more stable. The discrepancy may be explained as a lack of mesoscale turbulence in the wind tunnel.

Description: Logs collected while drilling measured density in situ, through the accretionary prism and decollement zone of the northern Barbados Ridge. Consolidation tests relate void ratio (derived from density) to effective stress and predict a fluid pressure profile, assuming that the upper 100 m of the prism is at a hydrostatic pressure gradient. The calculated fluid pressure curve rises to 〉90% of lithostatic below thrusts in the prism, presumably due to the increase in overburden and lateral tectonic loading. Thin (0.5–2.0 m) intervals of anomalously low density and resistivity in the logs through the basal decollement zone suggest dilation and perhaps hydrofracturing. A peak in hydraulic head in the upper half of the decollement zone requires lateral influx of fluid, a conclusion consistent with previous geochemical studies. Although the calculated fluid-pressure profile is model dependent, its inherent character ties to major structural features.

Description: Logs collected while drilling measured density in situ, through the accretionary prism and decollement zone of the northern Barbados Ridge. Consolidation tests relate void ratio (derived from density) to effective stress and predict a fluid pressure profile, assuming that the upper 100 m of the prism is at a hydrostatic pressure gradient. The calculated fluid pressure curve rises to 〉90% of lithostatic below thrusts in the prism, presumably due to the increase in overburden and lateral tectonic loading. Thin (0.5–2.0 m) intervals of anomalously low density and resistivity in the logs through the basal decollement zone suggest dilation and perhaps hydrofracturing. A peak in hydraulic head in the upper half of the decollement zone requires lateral influx of fluid, a conclusion consistent with previous geochemical studies. Although the calculated fluid-pressure profile is model dependent, its inherent character ties to major structural features.

Description: The interrelation between deformation styles and behavior of fluids in accretionary prisms is under debate, particularly the possibility that overpressuring within the basal decollement may enable mechanical decoupling of the prism from the subducting material. Anisotropy of magnetic susceptibility (AMS) data from sediments spanning the basal decollement of the Barbados accretionary prism show a striking progression across this structure that strongly supports the hypothesis that it is markedly overpressured. In the accretionary prism, above the decollement, the minimum AMS axes are subhorizontal and oriented nearly east-west, whereas the maximum AMS axes are oriented nearly north-south and shallowly inclined. At the top of the decollement, the minimum AMS axes orientations abruptly change to nearly vertical; this orientation is maintained throughout the decollement and in the underthrust sediments below. The AMS orientations in the prism sediments above the decollement are consistent with lateral shortening due to regional tectonic stress, as the minimum axes generally parallel the convergence vector of the subducting South American plate and the maximum axes are trench-parallel. Because the orientations of the AMS axes in deformed sediments usually parallel the orientations of the principal strains, the AMS results indicate that the incremental strain state in the Barbados prism is one dominated by subhorizontal shortening. In contrast, the AMS axes within and below the decollement are consistent with a strain state dominated by vertical shortening (compaction). This abrupt change in AMS orientations at the top of the decollement at Site 948 is a direct manifestation of mechanical decoupling of the off-scraped prism sediments from the underthrust sediments. The decoupling horizon occurs at the top of the decollement zone, coinciding with the location of flowing, high-pressure fluids.

Description: The microstructures and crystal fabrics associated with the development of an amphibolite facies quartzo-feldspathic mylonitic shear zone (Torridon, NW Scotland) have been investigated using SEM electron channelling. Our results illustrate a variety of microstructures and fabrics which attest to a complex shear zone deformation history. Microstructural variation is particularly pronounced at low shear strains: significant intragranular deformation occurs via a domino-faulting style process, whilst mechanical incompatibilities between individual grains result in characteristic grain boundary deformation accommodation microstructures. A sudden reduction in grain size defines the transition to medium shear strains, but many of the boundaries inherited from the original and low shear strain regions can still be recognized and define distinctive bands oriented at low angles to the shear zone margin. Grains within these bands have somewhat steeper preferred dimensional orientations. These domains persist into the high shear strain mylonitic region, where they are oriented subparallel to the shear zone margin and consist of sub-20 μm grains. The microstructures suggest that the principal deformation mechanism was intracrystalline plasticity (with contributions from grain size reduction via dynamic recrystallization, grain boundary migration and grain boundary sliding). Crystal fabrics measured from the shear zone vary with position depending on the shear strain involved, and are consistent with the operation of several crystal slip systems (e.g. prism, basal, rhomb and acute rhomb planes) in a consistent direction (probably parallel to a and/or m). They also reveal the presence of Dauphine twinning and suggest that this may be a significant process in quartz deformation. A single crystal fabric evolution path linking the shear zone margin fabric with the mylonitic fabric was not observed. Rather, the mylonitic fabric reflects the instantaneous fabric which developed at a particular location for a particular shear strain and original parental grain orientation. The mature shear zone therefore consists of a series of deformed original grains stacked on top of each other in a manner which preserves original grain boundaries and intragranular features which develop during shear zone evolution. The stability of some microstructures to higher shear strains, the exploitation of others at lower shear strains, and a continuously evolving crystal fabric, mean that the strain gradient observed across many shear zones is unlikely to be equivalent to a time gradient.

Description: During the Ocean Drilling Program Leg 110, six sites, on the lower eastern slope of the Barbados ridge accretionary complex and in front of it on the Atlantic Abyssal Plain, were drilled. These sites permitted the analysis of Eocene to Present sedimentation, and the structures and fabrics induced by offscraping and overthrusting of a part of the sedimentary series that covers thb oceanic floor. The main, basal, décollement, as well as several thrust-faults and asymmetrical to isoclinal folds were intersected. Chemical studies of pore water demonstrates that thrust-fault planes and the décollement are preferential pathways for dewatering processes and associated fluid circulation.