ALBERT

Description: The Kings-Kaweah ophiolite melange in east-central California is thought to be an obducted oceanic fracture zone and provides the rare opportunity to examine in detail the complex nature of this type of terrain. It is anticipated that the distribution and abundance of components in the melange can be used to determine the relative importance of geologic processes responsible for the formation of fracture zone crust. Laboratory reflectance spectra of field samples indicate that the melange components have distinct, diagnostic absorptions at visible to near-infrared wavelengths. The spatial and spectral resolution of AVIRIS is ideally suited for addressing important scientific questions concerning the Kings-Kaweah ophiolite melange and fracture zones in general.

Description: An Earth-based telescopic program to acquire near-infrared spectra of freshly exposed lunar material now contains data for 17 large impact craters with central peaks. Noritic, gabbroic, anorthositic and troctolitic rock types can be distinguished for areas within these large craters from characteristic absorptions in individual spectra of their walls and central peaks. Norites dominate the upper lunar crust while the deeper crustal zones also contain significant amounts of gabbros and anorthosites. Data for material associated with large craters indicate that not only is the lunar crust highly heterogeneous across the nearside, but that the compositional stratigraphy of the lunar crust is nonuniform. Crustal complexity should be expected for other planetary bodies, which should be studied using high spatial and spectral resolution data in and around large impact craters.

Description: For the last decade telescopic near infrared spectra have been obtained for small lunar areas. Such spectra, with the ground truth foundation from lunar samples, have been used extensively to address a multitude of problems in lunar science. Much of the near infrared spectral reflectance data from both laboratory and telescopic measurements have recently been compiled in comparable formats and an initial comparative assessment of the available data using selected spectral parameters has been made. The objective is to develop a framework for the systematics of lunar near-IR spectra in order to better interpret spectra of unknown materials in terms of useful compositional information. Each spectrum was first classified according to its general character then a variety of parameters sensitive to mineralogy and alteration products were measured for each spectrum: band width, band strength, absorption band center near 1 micron, band symmetry, continuum slope, etc. The telescopic and laboratory data sets are briefly described. The comparative analysis shows that a few well known lunar spectral properties are evident in both sets, such as the systematic variation in pyroxene composition between the highlands and the mare. However, an additional gabbroic component can be detected in many highland craters.

Description: The preliminary analysis and interpretation of near infrared spectra obtained for both the interior and exterior deposits associated with the Tycho crater is presented. Specific objectives were: (1) to determine the composition and stratigraphy of the highland crust in the Tycho target site; (2) to determine the likely composition of the primary ejecta which may be present in ray deposits; (3) to investigate the nature of spectral units defined in previous studies; (4) to further investigate the nature and origin of both the bright and dark haloes around the rim crest; and (5) to compare the compositions determined for the Tycho units with those of the Aristarchus crater as well as typical highland deposits. The spectra obtained for the interior areas exhibit similar spectral features. These include relatively strong 1 micron absorption bands whose minima are centered between 0.97 and 0.99 microns and shallow to intermediate continuum slopes. The spectra generally exhibit indications of a 1.3 micron feature consistent with the presence of Fe(2+) bearing plagioclase feldspar. The strong 1 micron absorption features indicate a dominant high Ca clinopyroxene component. Results obtained from the ejecta deposits show that the spectrum of the inner, bright halo is almost identical with those obtained for interior units. The spectrum of the dark halo exhibits a wide, relatively shallow absorption feature centered at 1.01 microns, a 1.3 micron absorption, and a steep continuum slope. This spectrum is interpreted as indicating the presence of pyroxene, Fe-bearing feldspar, and a significant component of Fe-bearing impact melt glass. Finally, the spectra of spots inside Tycho show similarity with certain spectra for Aristarchus. However, the suite of spectra obtained for Tycho exhibits a different trend in terms of band center versus width.

Description: Visible to near infrared reflectance spectra of macroscopic mixtures have been shown to be linear combinations of the reflections of the pure mineral components in the mixture. However, for microscopic mixtures the mixing systematics are in general nonlinear. The systematics may be linearized by conversion of reflectance to single scattering albedo (w), where the equations which relate reflectance to w depend on the method of data collection. Several proposed mixing models may be used to estimate mineral abundances from the reflectance spectra of intimate mixtures. These models are summarized and a revised model is presented. A noniterative (linear) least squares approach was used for curve fitting and the data, measured as bi-directional reflectance with incidence and emergence angles of 30 and 0 deg were converted to w by a simplified version of Hapke's equation for bi-directional reflectance. This model was tested with two mixture series composed of 45 to 75 micron particles: an anorthite-enstatite series and an olivine-magnetite series. The data indicate that the simplified Hapke's equation may be used to convolve reflectance spectra into mineral abundances if appropriate endmembers are known or derived from other techniques. For surfaces that contain a significant component of very low albedo material, a somewhat modified version of this technique will need to be developed. Since the abundances are calculated using a noniterative approach, the application of this method is especially efficient for large spectral data sets, such as those produced by mapping spectrometers.

Description: The relationship between ordinary chondrites and S-type asteroids is an unresolved issue in meteorite science. S-type asteroids exhibit a positively red-sloped spectrum that is interpreted to indicate the presence of elemental iron on the surfaces. The characteristic red-sloped spectrum of iron-rich meteorites is produced by only the specular component of the reflectance. Complex metallic surfaces can be modeled as linear mixtures of specular and nonspecular components. It is the geometry of the metal on a surface and its interaction with surrounding material, rather than the absolute amount of metal, that determine the redness of resulting spectra. In order to distinguish between ordinary chondrite and differentiated parent bodies it is important to understand how regolith processes affect the nature and form of metal on asteroid surfaces.

Description: Moses Rock dike is a Tertiary diatreme containing serpentinized ultramafic microbreccia (SUM). Field evidence indicates the SUM was emplaced first followed by breccias derived from the Permian strata exposed in the walls of the diatreme and finally by complex breccias containing basement and mantle derived rocks. SUM is found primarily dispersed throughout the matrix of the diatreme. Moses Rock dike was examined with Airborne Imaging Spectrometer (AIS) to map the distribution and excess of SUM in the matrix and to better understand the nature of the eruption which formed this explosive volcanic feature. AIS data was calibrated by dividing the suite of AIS data by data from an internal standard area and then multiplying this relative reflectance data by the absolute bidirectional reflectance of a selected sample from the standard area which was measured in the lab. From the calibrated AIS data the minerals serpentine, gypsum, and illite as well as desert varnish and the lithologies SUM and other sandstones were identified. SUM distribution and abundance in the matrix of the diatreme were examined in detail and two distinct styles of SUM dispersion were observed. The two styles are discussed in detail.

Description: The mass fractional abundance of components in intimately mixed, particulate surfaces is calculated from laboratory reflectance spectra using Hapke's (1981) model for bidirectional reflectance. It is found that a simplified version of the model is accurate to within 7 percent for mixtures not containing low albedo components. The model is not appropriate for mixtures with very low and high albedo components. Consideration is given to the possible improvement of the method's accuracy by using an empirical single-particle phase function to describe the scattering characteristics of all minerals, or by solving for the single-particle phase function of the minerals involved exactly using extensive bidirectional reflectance measurements and Hapke's equations for bidirectional reflectance. Also, the results are used to examine the general scattering behavior of particulate mineral surfaces.

Description: Pyroxene and plagioclase mixtures' spectral characteristics are investigated with a view to particle size and mineral proportion effects in the cases of variously proportioned labradorite/enstatite compositional mixtures. The amount of plagioclase that will allow its band to be observed in discrete absorption is particle size-dependent; plagioclase is detectable in the flattening of the pyroxene reflectance peak that lies between the 0.9 and 1.9 micron absorption bands, if sufficient plagioclase is present. Attention is given to the combined effects of mineral proportions and particle size for plagioclase/pyroxene mixtures in the case of analogs of mature and immature lunar highland soils.

Description: Data from the Airborne Imaging Spectrometer were used to map the distribution and abundance of the serpentized ultramafic microbreccia (SUM) component in the Moses Rock dike, which is a Tertiary diatreme located on the Colorado Plateau in Utah. The geologic setting and composition of Moses Rock dike are discussed together with its texture and the relationship to the bedrock of surface materials. These observations along with laboratory spectroscopic data are used to interpret surface mineralogy of the dike and the surrounding regions from the imaging spectometer data. The spatial distribution and the abundance of the primary surface components were calculated using a nonlinear model for the mixing of spectra from multicomponent surfaces. The derived SUM distribution and abundance data support McGetchin's (1968) model for the emplacement of Moses Rock dike as a fluidized system.