ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
Internal cathodic protection of salt water pipelines with the aid of platinized titanium anodesIn petroleum production heavy corrosion occurs in the salt water injecting or flooding pipelines. This corrosion can be eliminated either with the aid of a passive protection (protective coating) or, better, by means of an active protection, i.e. cathodic protection with impressed current. While short pipelines can be protected economically with rod anodes, a continuous, partially platinized titanium wire anode has proven must successful for long pipelines. Particular attention must be devoted to the problem of the current feed. The current density required for the protection of bare pipeline surfaces is in the order of 150 mA/sq.m. It can be considerably reduced by combining the active protection with a passive protection by a coating. In connection with the problem of a suitable reference electrode for measuring the protective potential in high pressure pipelines, experiments have been carried out to determine the protective current requirements in a stagnant and a flowing electrolyte respectively. Finally the question of the economy of the process is shortly discussed.
Notes:
Bei der Erdölförderung treten in Salzwassereinpreß- und --flutungsleitungen starke Korrosionen auf. Dieser Korrosion kann man mit einem passiven Schutz (durch Aufbringen eines Schutzanstriches) oder besser mit einem aktiven Schutz, dem kathodischen Korrosionsschutz mit. Fremdstrom, begegnen. Während in kurzen Rohrleitungen einzelne Stabanoden eingesetzt werden können, hat sich bei langen Rohrleitungen eine partiell platinierte Titandrahtanode bewährt. Dabei ist der Stromeinspeisung besondere Aufmerksamkeit zu schenken. Bei blanker Rohroberfläche liegt der Schutzstrombedarf bei 150 mA/m2. Er kann durch Kombinieren des aktiven Schutzes mit einem passiven Schutz (Anstrich) stark reduziert werden. Im Zusammenhang mit dem Problem einer geeigneten Referenzelektrode für die Schutzpotentialmessung in Druckrohrleitungen wurde versucht, den Schutzstrombedarf bei ruhendem und fließendem Elektrolyten festzustellen. Zum Abschluß wird auf Fragen der Wirtschaftlichkeit des Verfahrens eingegangen.
Additional Material:
11 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19680190602
Permalink