ISSN:
1432-0630
Keywords:
PACS: 81.15.Fg; 81.05.Ea; 77.65.Dq
Source:
Springer Online Journal Archives 1860-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
,
Physics
Notes:
Abstract. Aluminum nitride films of up to 1.2 μm thickness were deposited by excimer laser ablation onto c-, r-, m-, and a-cut sapphire substrates. The films were found to be of (00.1), (11.0), (10.0) and (00.1) orientation on c-, r-, m- and a-cut sapphire substrates, respectively. XRD pole figure measurements showed good in-plane alignment of all three sample sets. AFM measurements reveal that all films were atomically smooth in the initial stages of growth. Furthermore, for AlN(11.0) on r-cut sapphire the film surface remained smooth, with an r.m.s. roughness of about 1 nm up to a film thickness of 1.2 μm. AlN films with the polar c-axis parallel to the film surface are particularly favourable for SAW device applications, since the c-axis direction yields the strongest coupling coefficient. A smooth surface, as for AlN(11.0), is essential to prevent scattering of propagating surface acoustic waves. A SAW r.f. filter was fabricated with interdigital transducers of 5.6 μm wavelength on top of a 1.2 μm AlN(11.0) film on r-cut sapphire. The resonance frequency of 1.068 GHz corresponds well to theoretical expectations for the SAW velocity in this propagation geometry.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/s003390051505
Permalink
