ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
Influence of the cation composition of chloride solutions in modelling corrosion effects due to caoastal atmospheresPure sodium chloride solutions cannto be used for accelerated weathering tests in artificial sea atmosphere. A spray liquid suitable for such tests is artificial seawater containing (grams/litre) 27 NaCl, 6 Mg chloride, 1 Ca chloride and 1 KCl. The corrosion behaviour of the two metals studied - iron and zinc - is characterized by typical differences, in particular variations depending on the salt quantity applied. While the corrosion of iron at first increases with the salt concentration applied and achieves a maximum at about 1000 mg/m2d, the losses of zinc increase just to a salt quantity of 200 mg/m2 d and are then practically constant up to about 1000 mg/m2d; at higher concentrations there is again a slight diminuation of corrosion. The corrosion in artificial seawater is more pronounced than in sodium chloride solutions; this fact can be attributed to the hydrolysis of the chlorides in seawater, which gives rise to the formation of anodic and cathodic regions on the metal surface; as a consequence, pH differences are created and corrosion is enhanced. In order to simulate natural conditions as closely as possible the application of the salt spray should be interrupted by extended dry periods.
Notes:
Bei der beschleunigten Bewitterung in Künstilicher Meeresatmosphäre darf keinesfalls mit reinen Natriumchloridlösungen gearbeitet werden. Als Sprühflüssigk eit geeignet ist künstliches Meerwasser mit (g/l) 27 Nacl, 6 Mg-chlorid, 1 Ca-Chlorid und 1 KCL. Das Korrosionsverhalten der beiden untersuchten Metalle - Eisen und Zink- zeigt dabei charakteristische Unterschiede, vor allem in Abhängigkeit von der aufgebrachten Salzmenge. Während die Korrosion des Eisens mit zunehmender Salzkonzentration zunächst ansteigt und bei etwa 1000 mg/m2. Tag ein Maximum durchläuft, steigt die Abtragung von zink nur bis zur Salzdosierung von 200 mg/m2. Tag an und bleibt dann bis etwa 1000 mg/m2. Tag praktisch konstant; bei noch höheren Konzentrationen kommt es wieder zu einem flachen Abfall. Die im Vergleich zu Natriumchloridlösungen höhere Korrosion in künstlichem Meerwasser läßt sich auf die Hydrolysierbarkeit der Chloride zurückführen, wodurch an der Oberfläche des Metalls anodische und kathodische Bereiche mit unterschiedlichem pH entstehen, so daß die Korrosion beschleunigt abläuft. Um die natürlichen Bedingungen möglichst genau nachzuahmen, sollte die Salzaufgabe von längeren Trockenperioden unterbrochen sein.
Additional Material:
2 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19770280105
Permalink