ISSN:
0032-3888
Keywords:
Chemistry
;
Chemical Engineering
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Chemistry and Pharmacology
,
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
,
Physics
Notes:
The melt flows of linear low-density polyethylene (LLDPE) and branched low-density polyethylene (LDPE) have been compared in a fully intermeshing co-rotating twin-screw extruder. The polyethylene melts were selected in order to investigate the effects of the melt rheology on the mixing. Their shear vicosity curves are quite similar, but the LDPE has a markedly higher apparent extensional viscosity over a wide range of stretch rates. The stagger of the paddles in the mixing zone of the extruder creates axial pressure-driven axial flow can have significant extensional strain components. Residence time distributions obtained in the melt zones of the extruder with tracer dye reveal that the LDPE has a narrower residence time distribution than the LLDPE over a wide range of operating conditions. The axial dispersion for the LDPE is significantly lower than the axial dispersion for the LLDPE. This is attributed to the greater extensional viscosity of the LDPE. During the reactive extrusion process, solid maleic anhydride and polyethylene were added at the feed port but the peroxide provides better control of the crosslinking reaction. Residence time distributions measured for the chemically more reactive LLDPE melt indicate reduced levels of axial mixing with reaction. The reduction in mixing is due to a crosslinking reaction that occurs in parallel to the grafting reaction. This change in mixing is smaller than the difference in mixing between LDPE and LLDPE.
Additional Material:
17 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/pen.760351907
Permalink
