ALBERT

Description: We are developing arrays of Mo/Au bilayer transition-edge sensors (TES's) for applications in future X-ray astronomy missions such as NASA's Constellation-X. The physical properties of the superconducting-to-normal transition in our TES bilayers, while often reproducible and characterized, are not well understood. The addition of normal metal features on top of the bilayer are found to change the shape and temperature of the transition, and they typically reduce the unexplained 'excess' noise. In order to understand and potentially optimize the properties of the transition, we have been studying the temperature, widths and current dependence of these transitions. We report on the characterization of devices both deposited on silicon substrates and suspended on thin silicon nitride membranes. This includes key device parameters such as the logarithmic resistance sensitivity with temperature alpha, and the logarithmic resistance sensitivity with current beta, of the phase-transition. We investigate alpha and beta as a function of current, both at fixed and varying bias points in the transition. Using Ginzburg-Landau theory for the current dependence of the superconducting transition temperature, we investigate the relationship between alpha and beta and compare our measured and theoretical estimates.

Description: The solar cycle (SC) effect in the lower atmosphere has been linked observationally to the Quasi-biennial Oscillation (QBO), which is generated primarily by small-scale gravity waves (GW). Following up on a 2D study with our Numerical Spectral Model (NSM), we discuss here a 3D study in which we simulated the QBO under the influence of the SC. For a SC period of 10 years, the relative amplitude of radiative forcing is taken to vary exponentially with height, i.e., 0.2% at the surface, 2% at 50 km, 20% at 100 km and above. Applying spectral analysis to filter out and identify the SC signature, this model produces a relatively large modulation in the QBO of the lower stratospheric circulation, which is in qualitative agreement with the results obtained by Salby and Callaghan (2000) who analyzed zonal wind observations covering more than 40 years. The modeled SC modulation of the QBO extends to high latitudes where it produces temperature variations of about 1 K in the troposphere below 10 km. We report that the SC also generates in the model a hemispherically symmetric Equatorial Annual Oscillation (EAO, with 12-month period) that is largely confined to low latitudes. Under the influence of the GWs, the SC modulated EA0 propagates down into the lower stratosphere like the QBO. As is the case for the QBO, the energy of this EA0 is partially redistributed by the meridional circulation and planetary waves, presumably, to generate measurable SC signatures in the tropospheric temperature of the polar regions, which may be related to the so called Arctic Oscillation (Thompson and Wallace, 1998). The larger SC influence at higher altitudes is apparently transferred to the lower and denser regions of the atmosphere by tapping the momentum from the upward propagating GWs that drive the oscillations. The SC modulation of the QBO period could prove to be very effective in this process, as our earlier 2D study indicated. Further studies are needed, (1) to make sure that the SC effects are real and the numerical results are robust, and (2) to explore more fully the mechanism(s) that may conspire to amplify the SC effect. Quasi-decadal oscillations, generated internally by the QBO interacting with the seasonal cycles, may interfere with, or aid, the SC influence.

Description: We are developing arrays of superconducting transition-edge sensors (TES) for imaging spectroscopy telescopes such as the XMS on Constellation-X. While our primary focus has been on arrays that meet the XMS requirements (of which, foremost, is an energy resolution of 2.5 eV at 6 keV and a bandpass from approx. 0.3 keV to 12 keV), we have also investigated other optimizations that might be used to extend the XMS capabilities. In one of these optimizations, improved resolution below 1 keV is achieved by reducing the heat capacity. Such pixels can be based on our XMS-style TES's with the separate absorbers omitted. These pixels can added to an array with broadband response either as a separate array or interspersed, depending on other factors that include telescope design and science requirements. In one version of this approach, we have designed and fabricated a composite array of low-energy and broad-band pixels to provide high spectral resolving power over a broader energy bandpass than could be obtained with a single TES design. The array consists of alternating pixels with and without overhanging absorbers. To explore optimizations for higher count rates, we are also optimizing the design and operating temperature of pixels that are coupled to a solid substrate. We will present the performance of these variations and discuss other optimizations that could be used to enhance the XMS or enable other astrophysics experiments.

Description: X-ray emission from charge exchange recombination between the highly ionized solar wind and neutral material i n Earth's magnetosheath has complicated x-ray observations of celestial objects with x-ray observatories including ROSAT, Chandra, XMM-Newton, and Suzaku. However, the charge-exchange emission can also be used as an important diagnostic of the solar-wind interacting with the magnetosheath. Soft x-ray observations from low-earth orbit or even the highly eccentric orbits of Chandra and XMM-Newton are likely superpositions of the celestial object of interest, the true extra-solar soft x-ray background, geospheric charge exchange, and heliospheric charge exchange. We show that with a small x-ray telescope placed either on the moon, in a similar vein as the Apollo ALSOP instruments, or at a stable orbit near L1, we can begin t o disentangle the complicated emission structure in the soft x-ray band. Here we present initial results of a feasibility study recently funded by NASA t o place a small x-ray telescope on the lunar surface. The telescope operates during lunar night to observe charge exchange interactions between the solar wind and magnetospheric neutrals, between the solar wind and the lunar atmosphere, and an unobstructed view of the soft x-ray background without the geospheric component.

Description: Brown dwarfs are stellar objects with masses less than 0.08 times that of the Sun that are unable to sustain nuclear fusion. Because of the lack of fusion, they are relatively cold, allowing the formation of methane and water molecules in their atmospheres. Brown dwarfs can be detected by examining stars' absorption spectra in the near-infrared to see whether methane and water are present. The objective of this research is to determine the locations of brown dwarfs in Rho Ophiuchus, a star cluster that is only 1 million years old. The cluster was observed in four filters in the near-infrared range using the Wide-Field Infra-Red Camera (WIRC) on the 100" DuPont Telescope and Persson's Auxiliary Nasymith Infrared Camera (PANIC) on the 6.5-m Magellan Telescope. By comparing the magnitude of a star in each of the four filters, an absorption spectrum can be formed. This project uses standard astronomical techniques to reduce raw frames into final images and perform photometry on them to obtain publishable data. Once this is done, it will be possible to determine the locations and magnitudes of brown dwarfs within the cluster.

Description: Arrays of superconducting transition-edge sensors (TES) can provide high spatial and energy resolution necessary for x-ray astronomy. High quantum efficiency and uniformity of response can be achieved with a suitable absorber material, in which absorber x-ray stopping power, heat capacity, and thermal conductivity are relevant parameters. Here we compare these parameters for bismuth and gold. We have fabricated electroplated gold, electroplated gold/electroplated bismuth, and evaporated gold/evaporated bismuth 8x8 absorber arrays and find that a correlation exists between the residual resistance ratio (RRR) and thin film microstructure. This finding indicates that we can tailor absorber material conductivity via microstructure alteration, so as to permit absorber thermalization on timescales suitable for high energy resolution x-ray microcalorimetry. We show that by incorporating absorbers possessing large grain size, including electroplated gold and electroplated gold/electroplated bismuth, into our current Mo/Au TES, devices with tunable heat capacity and energy resolution of 2.3 eV (gold) and 2.1 eV (gold/bismuth) FWHM at 6 keV have been fabricated.