ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
Inhibition of low temperature circulating systems with lithium hydroxide in power stationsCorrosion current density measurements of mild steel St 37 in deionized, air-saturated water between 20 and 60°C showed that addition of small quantities of lithium hydroxide (ca. 25 ppm) protects against corrosion attacks similar to pitting corrosion and is found adequate even up to 5 ppm chloride ion concentration.Constant strain rate tests of mild steel St 37 showed no indication of stress corrosion cracking (SCC) at 70°C, up to 500 ppm lithium hydroxide, and 100 ppm chloride ion concentration. Metallographic examination of specimens indicated intergranular stress cracking with cracks of 1-30 m̈m depth in environments containing 2%, 4%, and saturated lithium hydroxide (with solid excess salt) at 70°C. Accumulation of lithium hydroxide should therefore be avoided.No SCC was observed in austenitic stainless steel X 5 CrNi 18 9 specimens in the above environments.
Notes:
Durch elektrochemische Bestimmung der „Korrosionsstromdichte“ wird festgestellt, daß gering Zusätze von Lithiumhydroxid (etwa 25 ppm) zu entionisiertem, luftgesättigtem Wasser im Temperaturbereich 20°C bis 60°C ausreichen, um St 37 gegen Sauerstoff- und lochartige Korrosion zu schützen. Diese Schutzwirkung ist auch gegeben, wenn das Wasser bis zu 5 ppm Chlorid enthält.Bei der Prüfung auf Spannungsrißkorrosion nach dem Verfahren mit konstanter Dehnungsgeschwindigkeit trat bei 70°C bis zu 500 ppm Lithiumhydroxid und bis 100 ppm Chlorid keine Spannungsrißkorrosion auf. Bei 2% und 4% Lithiumhydroxid bzw. gesättigter Lösung mit Bodenkörper zeigten sich bei metallographischer Überprüfung der Proben interkristalline Anrisse mit einer Tiefe von 1 bis 30 m̈m. Starke Aufkonzentration von Lithiumhydroxid muß daher im Wasser des Systems sicher vermieden werden.An dem austenitischen Stahl X5 CrNi 189 wurde in den entsprechenden Medien keine Korrosion beobachtet.
Additional Material:
8 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19790301003
Permalink