ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
The physical and corrosion-chemical behaviour of IVa metal alloysThe stability of titanium in respect of non-oxidant acids can be considerably increased by alloying it with Zr, Hf, Nb, Mo or Re. In the case of Zr, Hf, Nb and Ta, a decisive improvement of the corrosion behaviour can only be attained if the At-percentage of these metals in the alloys exceeds 50 pC. In the case of molybdenum, a content from 20 pC upwards has already a markedly passivating effect. But the improvement in corrosion properties must be bought at the price of poorer machinability. A particularly effective alloying metal, even in small quantities, is Rhenium. An excellent corrosion resistance and, at the same time, good machinability can be attained with ternary Ti-Mo-Ta alloys (with Mo + Ta accounting for some 20 At-pC) and with a Ti-12Mo-1Re alloy.The alloying of titanium with Zr, Hf, V, Cr or Mo is apt to cause, in some cases, a considerable deterioration in the scaling resistance of titanium. Improvements can be obtained by using small quantities of Nb, W and particularly Ta. Ti-Ta alloys with Ta contents up to 10 At-pC still have a good scaling resistance at 900° C.
Notes:
Die Beständigkeit des Titans gegenüber nichtoxidierenden Säuren läßt sich durch Zulegieren von Zr, Hf, Nb, Mo und Re z.T. beträchtlich steigern. Bei Zr, Hf, Nb and Ta wird eine entscheidende Verbesserung des Korrosionsverhaltens erst bei Gehalten von mehr als 50 At.-% dieser Metalle in den Legierungen erreicht. Molybdän wirkt schon bei Gehalten ab 20% stark passivierend; die Verbesserung der Korrosionseigenschaften muß aber durch schlechtere Verarbeitbarkeit erkauft werden. Ein besonders wirksamer Legierungszusatz, schon in geringen Mengen, ist das Rhenium. Als ganz hervorragend korrosionsbeständig und gleichzeitig gut verarbeitbar erwiesen sich ternäre Ti-Mo-Ta-Legierungen (Mo + Ta 20 At.-%) bzw. eine Ti-12Mo-1Re-Legierung.Die gute Zunderbeständigkeit des Titans wird durch Zulegieren von Zr, Hf, V, Cr und Mo z. T. ganz wesentlich herabgesetzt. Verbessernd wirken Nb, W und vor allem Ta in geringen Mengen. Ti-Ta-Legierungen mit Ta-Gehalten bis 10 At.-% sind noch bei 900° C gut zunderbeständig.
Additional Material:
10 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19680190204
Permalink