ALBERT

Description: To achieve sustainable development, massive changes towards fostering a clean and pollution-reducing industrial sector are quintessential. The textile industry has been one of the main contributors to water pollution all over the world, causing more than 20% of the registered levels of water pollution in countries like Turkey, Indonesia and China (among the G20 group of countries) and also in Romania and Bulgaria (in the Eastern European area), with even more than 44% in Macedonia. Given the controversy created by the textile industry’s contribution to pollution at a global level and also the need to diminish pollution in order to promote sustainable development, this paper comparatively investigates the contribution of the textile industry to the water pollution across Central and Eastern European countries, as well as developed countries. In addition, we employ the Holt–Winters model to forecast the trend of the total emissions of organic water pollutants, as well as of the textile industry’s contribution to pollution for the top polluters in Eastern Europe, i.e., Poland and Romania. According to our estimates, both countries are headed towards complete elimination of pollution caused by the textile industry and, hence, toward a more sustainable industrial sector, as Greenpeace intended with the release of its 2011 reports.

Description: Herein we describe poly(ionic liquid) hydrogel actuators that are capable of responding to multiple stimuli, namely temperature, ionic strength and white light irradiation. Using two starting materials, a crosslinked poly ionic liquid (PIL) and a linear poly(N-isopropylacrylamide-co-spiropyran-co-acrylic acid), several semi-interpenetrating (sIPN) hydrogels were synthesised. The dimensions of hydrogels discs were measured before and after applying the stimuli, to quantify their response. Samples composed of 100% crosslinked PIL alone showed an average area reduction value of ~53% when the temperature was raised from 20 °C to 70 °C, ~24% when immersed in 1% w/w NaF salt solution and no observable photo-response. In comparison, sIPNs containing 300% w/w linear polymer showed an average area reduction of ~45% when the temperature was raised from 20 °C to 70 °C, ~36% when immersed in 1% NaF w/w salt solution and ~10% after 30 min exposure to white light irradiation, respectively. Moreover, by varying the content of the linear component, fine-control over the photo-, thermo- and salt response, swelling-deswelling rate and mechanical properties of the resulting sIPN was achieved.

Description: Online collaboration and web-based knowledge sharing have gained momentum as major components of the Web 2.0 movement. Consequently, knowledge embedded in such platforms is no longer static and continuously evolves through experts’ micro-contributions. Traditional Information Retrieval and Social Network Analysis techniques take a document-centric approach to expertise modeling by creating a macro-perspective of knowledge embedded in large corpus of static documents. However, as knowledge in collaboration platforms changes dynamically, the traditional macro-perspective is insufficient for tracking the evolution of knowledge and expertise. Hence, Expertise Profiling is presented with major challenges in the context of dynamic and evolving knowledge. In our previous study, we proposed a comprehensive, domain-independent model for expertise profiling in the context of evolving knowledge. In this paper, we incorporate Language Modeling into our methodology to enhance the accuracy of resulting profiles. Evaluation results indicate a significant improvement in the accuracy of profiles generated by this approach. In addition, we present our profile visualization tool, Profile Explorer, which serves as a paradigm for exploring and analyzing time-dependent expertise profiles in knowledge-bases where content evolves overtime. Profile Explorer facilitates comparative analysis of evolving expertise, independent of the domain and the methodology used in creating profiles.

Description: Sustainability, Vol. 10, Pages 1162: Ensuring More Sustainable Reporting in Europe Using Non-Financial Disclosure—De Facto and De Jure Evidence Sustainability doi: 10.3390/su10041162 Authors: Francesca Manes-Rossi Adriana Tiron-Tudor Giuseppe Nicolò Gianluca Zanellato Non-financial disclosure has become increasingly popular, as it can satisfy the information needs of a growing range of stakeholders. Because traditional financial reports cannot provide comprehensive accountability, several frameworks and guidelines for facilitating non-financial information disclosure have been developed. Recently, the European Union issued Directive 2014/95/EU (EU Directive) and subsequent guidelines (EU Guidelines 2017/C215/01 [EUG]) to mandate European entities of public interest to convey non-financial information to improve such organizations’ accountability toward their stakeholders. This paper studies the European stage of non-financial reporting from a regulatory and practical point of view. To this end, the first research objective is to analyze the elements that the EUG have in common with the IIRF and the GRI 4 guidelines. Second, the paper proposes a first analysis to assess the compliance to the EUG by performing a content analysis on a sample of annual reports and integrated reports (IR) drafted by the 50 biggest European companies. The results highlight that the content elements required by the Directive exceed the requirements of the two frameworks and that there is already a high level of compliance by European big companies with the EUG. More specifically, particular attention is devoted to Social, Employee and Environmental Matters. Accordingly, the companies demonstrated a common awareness of the necessity to provide an exhaustive amount of social and environmental disclosure in order to maintain legitimacy. Also the disclosure on Principal Risks and Their Management is widespread to meet investors’ and stakeholders’ requirements in recent years with respect to the general level of risk disclosure provided by companies.

Description: Sustainability, Vol. 10, Pages 939: Transforming Data Centers in Active Thermal Energy Players in Nearby Neighborhoods Sustainability doi: 10.3390/su10040939 Authors: Marcel Antal Tudor Cioara Ionut Anghel Claudia Pop Ioan Salomie In this paper, we see the Data Centers (DCs) as producers of waste heat integrated with smart energy infrastructures, heat which can be re-used for nearby neighborhoods. We provide a model of the thermo-electric processes within DCs equipped with heat reuse technology, allowing them to adapt their thermal response profile to meet various levels of hot water demand. On top of the model, we have implemented computational fluid dynamics-based simulations to determine the cooling system operational parameters settings, which allow the heat to build up without endangering the servers’ safety operation as well as the distribution of the workload on the servers to avoid hot spots. This will allow for setting higher temperature set points for short periods of time and using pre-cooling and post-cooling as flexibility mechanisms for DC thermal profile adaptation. To reduce the computational time complexity, we have used neural networks, which are trained using the simulation results. Experiments have been conducted considering a small operational DC featuring a server room of 24 square meters and 60 servers organized in four racks. The results show the DCs’ potential to meet different levels of thermal energy demand by re-using their waste heat in nearby neighborhoods.

Description: Sensors, Vol. 18, Pages 2410: Development of User-Friendly Wearable Electronic Textiles for Healthcare Applications Sensors doi: 10.3390/s18082410 Authors: Kai Yang Katie Meadmore Chris Freeman Neil Grabham Ann-Marie Hughes Yang Wei Russel Torah Monika Glanc-Gostkiewicz Steve Beeby John Tudor This paper presents research into a user-friendly electronic sleeve (e-sleeve) with integrated electrodes in an array for wearable healthcare. The electrode array was directly printed onto an everyday clothing fabric using screen printing. The fabric properties and designed structures of the e-sleeve were assessed and refined through interaction with end users. Different electrode array layouts were fabricated to optimize the user experience in terms of comfort, effectivity and ease of use. The e-sleeve uses dry electrodes to facilitate ease of use and the electrode array can survive bending a sufficient number of times to ensure an acceptable usage lifetime. Different cleaning methods (washing and wiping) have been identified to enable reuse of the e-sleeve after contamination during use. The application of the e-sleeve has been demonstrated via muscle stimulation on the upper limb to achieve functional tasks (e.g., hand opening, pointing) for eight stroke survivors.

Description: The 2012 Doha meeting established the continuation of the Kyoto protocol, the legally-binding global agreement under which signatory countries had agreed to reduce their carbon emissions. Contrary to this assumed obligation, all G20 countries with the exception of France and the UK saw significant increases in their CO2 emissions over the last 25 years, surpassing 300% in the case of China. This paper attempts to forecast the evolution of carbon dioxide emissions in Bahrain over the 2012–2021 decade by employing seven Automated Forecasting Methods, including the exponential smoothing state space model (ETS), the Holt–Winters Model, the BATS/TBATS model, ARIMA, the structural time series model (STS), the naive model, and the neural network time series forecasting method (NNAR). Results indicate a reversal of the current decreasing trend of pollution in the country, with a point estimate of 2309 metric tons per capita at the end of 2020 and 2317 at the end of 2021, as compared to the 1934 level achieved in 2010. The country’s baseline level corresponding to year 1990 (as specified by the Doha amendment of the Kyoto protocol) is approximately 25.54 metric tons per capita, which implies a maximum level of 20.96 metric tons per capita for the year 2020 (corresponding to a decrease of 18% relative to the baseline level) in order for Bahrain to comply with the protocol. Our results therefore suggest that Bahrain cannot meet its assumed target.

Description: Recent progress in patterned microelectrode manufacturing technology and microfluidics has opened the way to a large variety of cellular and molecular biosensor-based applications. In this extremely diverse and rapidly expanding landscape, silicon-based technologies occupy a special position, given their statute of mature, consolidated, and highly accessible areas of development. Within the present work we report microfabrication procedures and workflows for 3D patterned gold-plated microelectrode arrays (MEA) of different shapes (pyramidal, conical and high aspect ratio), and we provide a detailed characterization of their physical features during all the fabrication steps to have in the end a reliable technology. Moreover, the electrical performances of MEA silicon chips mounted on standardized connector boards via ultrasound wire-bonding have been tested using non-destructive electrochemical methods: linear sweep and cyclic voltammetry, impedance spectroscopy. Further, an experimental recording chamber package suitable for in vitro electrophysiology experiments has been realized using custom-design electronics for electrical stimulus delivery and local field potential recording, included in a complete electrophysiology setup, and the experimental structures have been tested on newborn rat hippocampal slices, yielding similar performance compared to commercially available MEA equipments.

Description: Symmetry, Vol. 10, Pages 52: Lorentz Transformation, Poincarévectors and Poincarésphere in Various Branches of Physics Symmetry doi: 10.3390/sym10030052 Authors: Tiberiu Tudor In the frame of a generic language extended from the polarization theory—comprising the notions of Poincaré vectors, Poincaré sphere, and P-spheres—a geometric approach to Lorentz transformations alternative to the Minkowskian one is given. Unlike the four-dimensional Minkowskian approach, this new approach operates in the three-dimensional space of Poincaré vectors.

Description: Sensors, Vol. 18, Pages 162: Blockchain Based Decentralized Management of Demand Response Programs in Smart Energy Grids Sensors doi: 10.3390/s18010162 Authors: Claudia Pop Tudor Cioara Marcel Antal Ionut Anghel Ioan Salomie Massimo Bertoncini In this paper, we investigate the use of decentralized blockchain mechanisms for delivering transparent, secure, reliable, and timely energy flexibility, under the form of adaptation of energy demand profiles of Distributed Energy Prosumers, to all the stakeholders involved in the flexibility markets (Distribution System Operators primarily, retailers, aggregators, etc.). In our approach, a blockchain based distributed ledger stores in a tamper proof manner the energy prosumption information collected from Internet of Things smart metering devices, while self-enforcing smart contracts programmatically define the expected energy flexibility at the level of each prosumer, the associated rewards or penalties, and the rules for balancing the energy demand with the energy production at grid level. Consensus based validation will be used for demand response programs validation and to activate the appropriate financial settlement for the flexibility providers. The approach was validated using a prototype implemented in an Ethereum platform using energy consumption and production traces of several buildings from literature data sets. The results show that our blockchain based distributed demand side management can be used for matching energy demand and production at smart grid level, the demand response signal being followed with high accuracy, while the amount of energy flexibility needed for convergence is reduced.