ALBERT

Description: IJERPH, Vol. 15, Pages 2018: The Sensitivity, Specificity and Accuracy of Warning Signs in Predicting Severe Dengue, the Severe Dengue Prevalence and Its Associated Factors International Journal of Environmental Research and Public Health doi: 10.3390/ijerph15092018 Authors: Mohd Hanief Ahmad Mohd Ismail Ibrahim Zeehaida Mohamed Nabilah Ismail Muhammad Amiruddin Abdullah Rafidah Hanim Shueb Mohd Nazri Shafei Objectives: To study Malaysian dengue clinical practice guideline (CPG) warning signs (WS) in predicting severe dengue (SD) and its associated factors among confirmed cases presented to a teaching hospital in north-eastern Malaysia in 2014. Methods: A cross-sectional study was performed in February 2015 using secondary data acquired from the hospital records. There were 2607 confirmed dengue cases presented to Hospital Universiti Sains Malaysia (HUSM) in 2014. Seven hundred patients were selected after proportionate stratified random sampling conducted according to the number of cases in 12 different months in 2014. Data were collected and analysed using SPSS version 22.0. Results: Severe dengue outcomes represented 4.9% of cases. The prevalence of any of WS in SD was 91.2%. The most common WSs prior to SD were persistent vomiting (55.9%), and abdominal pain/tenderness (52.9%). The most sensitive warning sign in detecting SD was abdominal pain (59%). Specificity of individual WS were generally good, especially of clinical fluid accumulation (99%), hepatomegaly (98%) and mucosal bleeding (93%). Factors associated with SD were persistent vomiting (Adjusted odds ratio (aOR)): 2.41), mucosal bleeding (aOR: 4.73) and haematocrit rise with rapid platelet drop (aOR: 2.74). Conclusion: A focus on sensitivity, specificity, predictive values and association of a number of particular WS should be emphasized in order to better predict severe dengue outcomes.

Description: This study investigated the capability of a biosurfactant produced by a novel strain of Bacillus salmalaya to enhance the biodegradation rates and bioavailability of organic contaminants. The biosurfactant produced by cultured strain 139SI showed high physicochemical properties and surface activity in the selected medium. The biosurfactant exhibited a high emulsification index and a positive result in the drop collapse test, with the results demonstrating the wetting activity of the biosurfactant and its potential to produce surface-active molecules. Strain 139SI can significantly reduce the surface tension (ST) from 70.5 to 27 mN/m, with a critical micelle concentration of 0.4%. Moreover, lubricating oil at 2% (v/v) was degraded on Day 20 (71.5). Furthermore, the biosurfactant demonstrated high stability at different ranges of salinity, pH, and temperature. Overall, the results indicated the potential use of B. salmalaya 139SI in environmental remediation processes.

Description: This paper reports on a two-step approach for optimally determining the location and severity of damage in beam structures under flexural vibration. The first step focuses on damage location detection. This is done by defining the damage index called relative wavelet packet entropy (RWPE). The damage severities of the model in terms of loss of stiffness are assessed in the second step using the inverse solution of equations of motion of a structural system in the wavelet domain. For this purpose, the connection coefficient of the scaling function to convert the equations of motion in the time domain into the wavelet domain is applied. Subsequently, the dominant components based on the relative energies of the wavelet packet transform (WPT) components of the acceleration responses are defined. To obtain the best estimation of the stiffness parameters of the model, the least squares error minimization is used iteratively over the dominant components. Then, the severity of the damage is evaluated by comparing the stiffness parameters of the identified model before and after the occurrence of damage. The numerical and experimental results demonstrate that the proposed method is robust and effective for the determination of damage location and accurate estimation of the loss in stiffness due to damage.

Description: A study was conducted to determine the efficacy of applying ground magnesium limestone (GML) or ground basalt in combination with bio-fertilizer to sustain rice production on an acid sulfate soil in Malaysia. Soils from Kelantan Plains, Malaysia, were treated with GML, ground basalt, bio-fertilizer, GML + bio-fertilizer, and ground basalt + bio-fertilizer (4 t·ha−1 each). Results showed that soil fertility was improved by applying the soil amendments. GML and basalt contain some Zn and Cu; thus, application of these amendments would increase their contents in the soil needed for the healthy growth of rice. Basalt applied in combination with bio-fertilizer appeared to be the best agronomic option to improve the fertility of acid sulfate soils for sustainable rice production in the long run. In addition to increasing Ca, Mg, Zn, and Cu reserves in the soil, water pH increased and precipitated Al3+ and/or Fe2+. Ground basalt is cheaper than GML, but basalt dissolution in the acidic soil was slow. As such, its ameliorative effects could only be seen significantly from the second season onwards. The specially-formulated bio-fertilizer for alleviating the infertility of acid sulfate soil could also enhance rice growth. The use of the bio-fertilizer fortified with N2-fixing bacteria is a green technology that would help reduce NO3− and/or NO2− pollution and reduce the cost of rice production. The phosphate-solubilizing bacteria (PSB) present in the bio-fertilizer not only increased the available P, but also helped release organic acids that would inactivate Al3+ and/or Fe2+ via the process of chelation.

Description: A fiber optic daylighting system is an evolving technology for transporting illumination from sunlight into building interiors. This system is a solution developed by daylighting designers to reduce operational costs and enhance comfort. As an innovative technology, fiber optic daylighting systems can illuminate building interiors efficiently compared with other daylighting strategies. However, as a transmission medium in daylighting systems, optical fibers require uniform light distribution in sunlight concentration, which could generate heat. Therefore, this study aims to investigate the effect of heat buildup produced by end-emitting fiber optic daylighting systems in tropical buildings. The applied method adopts a new fiber optic daylighting system technology from Sweden called Parans SP3, with a 10 m cable to be tested in an actual room size under the Malaysian climatic environment, particularly within the vicinity of the main campus of the Universiti Sains Malaysia. Results show that the system generated a temperature of 1.3 °C under average conditions through fiber optic diffusers and increases indoor temperature by 0.8 °C in a 60 m3 room. According to the results, applying fiber optic daylighting systems, as renewable energy sources, generates extra heat gain in building interiors in the tropics.

Description: Chlorpyrifos (CPF) is a commonly used organophosphate insecticide (OP). In adults, exposure to OPs has been inconsistently associated with reduced lung function. OP exposure and lung function has not been assessed in adolescents. The objective of this study was to assess CPF exposure and lung function among Egyptian adolescents. We conducted a 10-month study of male adolescent pesticide applicators (n = 38) and non-applicators of similar age (n = 24). Urinary 3,5,6-trichloro-2-pyridinol (TPCy), a CPF-specific metabolite, was analyzed in specimens collected throughout the study. Spirometry was performed twice after pesticide application: day 146, when TCPy levels were elevated and day 269, when TCPy levels were near baseline. Applicators had higher levels of TCPy (mean cumulative TCPy day 146 = 33,217.6; standard deviation (SD) = 49,179.3) than non-applicators (mean cumulative TCPy day 146 = 3290.8; SD = 3994.9). Compared with non-applicators, applicators had higher odds of reporting wheeze, odds ratio = 3.41 (95% CI: 0.70; 17.41). Cumulative urinary TCPy was inversely associated with spirometric measurements at day 146, but not at day 269. Although generally non-significant, results were consistent with an inverse association between exposure to CPF and lung function.

Description: This paper investigates the effect of the solids-to-liquids (S/L) and Na2SiO3/NaOH ratios on the production of palm oil boiler ash (POBA) based geopolymer. Sodium silicate and sodium hydroxide (NaOH) solution were used as alkaline activator with a NaOH concentration of 14 M. The geopolymer samples were prepared with different S/L ratios (0.5, 1.0, 1.25, 1.5, and 1.75) and Na2SiO3/NaOH ratios (0.5, 1.0, 1.5, 2.0, 2.5, and 3.0). The main evaluation techniques in this study were compressive strength, X-Ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), and Scanning Electron Microscope (SEM). The results showed that the maximum compressive strength (11.9 MPa) was obtained at a S/L ratio and Na2SiO3/NaOH ratio of 1.5 and 2.5 at seven days of testing. v

Description: In this paper, we propose two soft computing localization techniques for wireless sensor networks (WSNs). The two techniques, Neural Fuzzy Inference System (ANFIS) and Artificial Neural Network (ANN), focus on a range-based localization method which relies on the measurement of the received signal strength indicator (RSSI) from the three ZigBee anchor nodes distributed throughout the track cycling field. The soft computing techniques aim to estimate the distance between bicycles moving on the cycle track for outdoor and indoor velodromes. In the first approach the ANFIS was considered, whereas in the second approach the ANN was hybridized individually with three optimization algorithms, namely Particle Swarm Optimization (PSO), Gravitational Search Algorithm (GSA), and Backtracking Search Algorithm (BSA). The results revealed that the hybrid GSA-ANN outperforms the other methods adopted in this paper in terms of accuracy localization and distance estimation accuracy. The hybrid GSA-ANN achieves a mean absolute distance estimation error of 0.02 m and 0.2 m for outdoor and indoor velodromes, respectively.

Description: In this study, the electric field signatures of negative ground flashes pertinent to the Swedish thunderstorms were recorded simultaneously during the summer of 2014 using wide (up to 100 MHz) and narrow (at 3 MHz and 30 MHz as central frequencies) bandwidth antenna systems. The electric field signatures were recorded for a time duration of 250 ms. In the analysis, the whole flash was considered and a total of 98 flashes were chosen where electric field signatures of all wideband, 3 MHz and 30 MHz signals were present. It is observed that preliminary breakdown pulses are stronger radiators at 3 and 30 MHz compared to the return strokes. A comparison of our results with those of the previous studies obtained from different geographical regions clearly shows that the strength of preliminary breakdown pulses is higher in the temperate region (Sweden for instance) and is a function of latitude.

Description: In this paper, we propose an energy-efficient transmission technique known as the sleep/wake algorithm for a bicycle torque sensor node. This paper aims to highlight the trade-off between energy efficiency and the communication range between the cyclist and coach. Two experiments were conducted. The first experiment utilised the Zigbee protocol (XBee S2), and the second experiment used the Advanced and Adaptive Network Technology (ANT) protocol based on the Nordic nRF24L01 radio transceiver chip. The current consumption of ANT was measured, simulated and compared with a torque sensor node that uses the XBee S2 protocol. In addition, an analytical model was derived to correlate the sensor node average current consumption with a crank arm cadence. The sensor node achieved 98% power savings for ANT relative to ZigBee when they were compared alone, and the power savings amounted to 30% when all components of the sensor node are considered. The achievable communication range was 65 and 50 m for ZigBee and ANT, respectively, during measurement on an outdoor cycling track (i.e., velodrome). The conclusions indicate that the ANT protocol is more suitable for use in a torque sensor node when power consumption is a crucial demand, whereas the ZigBee protocol is more convenient in ensuring data communication between cyclist and coach.