ALBERT

Description: This article shows the research carried out by the authors focused on how the shape of structural reinforced concrete elements treated with electrochemical chloride extraction can affect the efficiency of this process. Assuming the current use of different anode systems, the present study considers the comparison of results between conventional anodes based on Ti-RuO2 wire mesh and a cement-based anodic system such as a paste of graphite-cement. Reinforced concrete elements of a meter length were molded to serve as laboratory specimens, to closely represent authentic structural supports, with circular and rectangular sections. Results confirm almost equal performances for both types of anode systems when electrochemical chloride extraction is applied to isotropic structural elements. In the case of anisotropic ones, such as rectangular sections with no uniformly distributed rebar, differences in electrical flow density were detected during the treatment. Those differences were more extreme for Ti-RuO2 mesh anode system. This particular shape effect is evidenced by obtaining the efficiencies of electrochemical chloride extraction in different points of specimens.

Description: Stand-alone power systems based on renewable energy sources are used to replace generators based on fossil fuels. Those renewable power systems also require Energy Storage Devices (ESD) interfaced by a charger/discharger power converter, which consist of a bidirectional DC/DC converter, and a DC bus. This paper proposes a single sliding-mode controller (SMC) for the charger/discharger DC/DC converter to provide a stable DC bus voltage in any operation condition: charging or discharging the ESD, or even without any power exchange between the ESD and the DC bus. Due to the non-linear nature of the power converter, the SMC parameters are adapted on-line to ensure global stability in any operation condition. Such stability of the adaptive SMC is mathematically demonstrated using analytical expressions for the transversality, reachability and equivalent control conditions. Moreover, a design procedure for the adaptive SMC parameters is provided in order to ensure the dynamic response required for the correct operation of the load. Finally, simulations and experimental tests validate the proposed controller and design procedure.

Description: In recent years, ongoing efforts by a multitude of universities, local governments, federal agencies, and non-governmental organizations (NGOs) have been focused on sea-level rise (SLR) adaptation in Florida. However, within these efforts, there has been very little attention given to the potential impacts of sea-level rise on human health. The intent of this project is to identify populations in Southeast Florida that are most vulnerable to sea-level rise from a topographic perspective, determine how vulnerable these population are from a socio-economic perspective, identify potential health impacts, develop adaptation strategies designed to assist these communities, and produce an outreach effort that can be shared with other coastal communities. The location of socially-vulnerable and health-vulnerable populations are correlated, but at present they are not generally in the geographically-vulnerable areas. Projections indicate that they will become at risk in the future but the lack of data on emerging diseases makes public health assessments difficult. We propose a redefinition of “who is vulnerable?” to include health indicators and hard infrastructure solutions for flood and property protection. These tools can be used to help protect water resources from the impacts of climate change, which would, in turn, protect public health via drinking water supplies, and efforts to address social issues.

Description: The Holocene, Ahead of Print. 〈br/〉

Description: The Holocene, Volume 29, Issue 2, Page 300-312, February 2019. 〈br/〉

Description: A recent approach to mitigate the adverse effects of photovoltaic (PV) arrays operating under mismatching conditions is the dynamic electrical reconfiguration of the PV panels. This paper introduces a procedure to determine the best configuration of a PV array connected in a series-parallel structure without using complex mathematical models. Such a procedure uses the experimental current vs. voltage curves of the PV panels, which are composed of multiple PV modules, to construct the power vs. voltage curves of all of the possible configurations to identify the optimal one. The main advantage of this method is the low computational effort required to reconstruct the power vs. voltage curves of the array. This characteristic enables one to implement the proposed solution using inexpensive embedded devices, which are widely adopted in industrial applications. The proposed method, and its embedded implementation, were tested using a hardware-in-the-loop simulation of the PV system. Finally, the real-time operation and benefits of the proposed solution are illustrated using a practical example based on commercial devices.

Description: Central Chile is heavily exploited for mineral and water resources, with agriculture and large urban populations all creating intensive landscape use. Few records of past environmental and climate change are available that afford a broader context. To aid in this assessment, we present a 700-year reconstruction from Laguna del Maule (LdM) in the high Andes of central Chile based on sedimentological, geochemical, diatom and pollen analyses. The age model is based on 210 Pb/ 137 Cs and 14 C dating tied into known volcanic eruptions. Sedimentology consists of organic-rich sediments and diatom oozes with several interspersed volcanic-rich facies and two tephra deposits. Sediment geochemistry exhibits increased productivity (high Br/Ti, biosilica) and more dominant oxic conditions (high Fe/Mn) from AD 1300 to 1400 and from AD 1650 to 1850, likely during periods of relatively lower lake levels and better development of littoral environments. However, during this later period, high elevation vegetation was dominant, indicative of regional cooler/wetter conditions. In contrast, sediments deposited from AD 1850 to 1930 evidence decreased productivity and increased anoxic lake bottom conditions. The ‘Little Ice Age’ (LIA) in LdM is characterized by significant variations in lake dynamics and hydrology with cooler/wetter conditions (AD 1570–1700), major environmental changes in the 18th century and ending at ca. AD 1850. LdM record documents the impact of the LIA in the southern hemisphere and stresses the global nature of this climate period. Large changes in lake dynamics and diatoms assemblages during the 20th century could be related to anthropogenic impacts, but recent changes in climate patterns cannot be excluded.

Description: In recent years, several researchers have shown the good performance of alkali activated slag cement and concretes. Besides their good mechanical properties and durability, this type of cement is a good alternative to Portland cements if sustainability is considered. Moreover, multifunctional cement composites have been developed in the last decades for their functional applications (self-sensing, EMI shielding, self-heating, etc.). In this study, the strain and damage sensing possible application of carbon fiber reinforced alkali activated slag pastes has been evaluated. Cement pastes with 0, 0.29 and 0.58 vol % carbon fiber addition were prepared. Both carbon fiber dosages showed sensing properties. For strain sensing, function gage factors of up to 661 were calculated for compressive cycles. Furthermore, all composites with carbon fibers suffered a sudden increase in their resistivity when internal damages began, prior to any external signal of damage. Hence, this material may be suitable as strain or damage sensor.

Description: A previous article has presented the members of the asymmetrical interleaved dc/dc switching converters family as very appropriate candidates to interface between photovoltaic or fuel cell generators and their loads because of their reduced ripple and increased current processing capabilities. After a review of the main modeling methods suitable for high-order converters operating, as the asymmetrical interleaved converters (AIC) ones, in discontinuous current conduction mode a full-order averaged model has been adapted and improved to describe the dynamic behavior of AIC. The excellent agreement between the mathematical model predictions, the switched simulations and the experimental results has allowed for satisfactory design of a linear-quadratic regulator (LQR) in a fuel-cell application example, which demonstrates the usefulness of the improved control-oriented modeling approach when the switching converters operate in discontinuous conduction mode.

Description: A multiproxy study of a 7 m long sedimentary sequence from Lake La Parra (39°50.948', 1°52', 1014 m a.s.l.) supported by 11 14 C AMS and 210 Pb/ 137 Cs dates provides a robust, high-resolution hydrological and environmental variability record for the last 1600 years of the Las Torcas sinkhole Complex in the Central Iberian Range. The succession of depositional environments in Lake La Parra sinkhole is controlled by both changes in the regional water table and by the balance between sedimentary input through ephemeral creeks and in-lake production of carbonates and organic matter. Although synergetic links with climate are likely, phases of increased sediment delivery to the lake at c . ad 500–700, c . ad 1000, ad 1450–1500, ad 1550–650 and since 1700 till recent times are driven primarily by human impact in the watershed. Prior to c . ad 300, the sinkhole was dry, then became a lake at the end of the Roman Period ( ad 350) when the doline was flooded, and it has not dried out during the last 1600 years. Moderate lake levels with deposition of coarser clastic facies dominated up to the 12th century ( ad 400–1200), and relatively higher levels with deposition of laminated facies during the 13th–15th centuries ( ad 1200–1600). The pattern of palaeohydrological evolution at a centennial scale is roughly coherent with most Iberian lacustrine records; however, the ‘La Parra’ sequence indicates that increased humidity during Iberian–Roman times was restricted to southern Spain and the humid phases of the ‘Little Ice Age’ (‘LIA’) starting and ending earlier in the central Iberian Range compared with the Pyrenean Domain and southern Spain. This new sequence highlights the heterogeneity through space and time of the main dry and wet climatic periods at shorter scales, emphasizing the impact of latitudinal climate gradients on the Iberian Peninsula climate variability.